Здравствуйте. мне очень нужна помощь.
Имеется Cisco 2811 c модулем VWIC-1MFT-E1 и HWIC-4ESW. Модуль VWIC-1MFT-E1 однопортовый. Проблемма в том что после запуска Cisco (еще до ввода лога ипаса) выдается ошибка:
%CONTROLLER-2-FIRMWARE: Controller E1 0/1/1, firmware is not running

вот листинг
yourname#
*Sep 17 08:38:36.039: %CONTROLLER-2-FIRMWARE: Controller E1 0/1/1, firmware is n
ot running
yourname#
*Sep 17 08:38:46.039: %CONTROLLER-2-FIRMWARE: Controller E1 0/1/1, firmware is n
ot running
yourname#
*Sep 17 08:38:56.039: %CONTROLLER-2-FIRMWARE: Controller E1 0/1/1, firmware is n
ot running

yourname#sh diag

Slot 0:
        C2811 Motherboard with 2FE and integrated VPN Port adapter, 2 ports
        Port adapter is analyzed
        Port adapter insertion time 00:06:03 ago
        Onboard VPN             : v2.3.3
        EEPROM contents at hardware discovery:
        PCB Serial Number        : FOC14201ZDJ
        Hardware Revision        : 1.0
        Top Assy. Part Number    : 800-26920-07
        Board Revision           : B0
        Deviation Number         : 0
        Fab Version              : 04
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Processor type           : 87
        Hardware date code       : 20100515
        Chassis Serial Number    : FCZ1426705Z
        Chassis MAC Address      : 1c17.d3dc.60f0
        MAC Address block size   : 24
        CLEI Code                : COMHT00ARA
        Product (FRU) Number     : CISCO2811
        Part Number              : 73-10258-06

o       Version Identifier       : V08
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF C1 8B 46 4F 43 31 34 32 30 31 5A 44 4A 40
          0x10: 03 E7 41 01 00 C0 46 03 20 00 69 28 07 42 42 30
          0x20: 88 00 00 00 00 02 04 03 00 81 00 00 00 00 04 00
          0x30: 09 87 83 01 32 B5 A3 C2 8B 46 43 5A 31 34 32 36
          0x40: 37 30 35 5A C3 06 1C 17 D3 DC 60 F0 43 00 18 C6
          0x50: 8A 43 4F 4D 48 54 30 30 41 52 41 CB 8F 43 49 53
          0x60: 43 4F 32 38 31 31 20 20 20 20 20 20 82 49 28 12
          0x70: 06 89 56 30 38 20 D9 03 40 C1 C2 FF FF FF FF FF

        WIC Slot 0:
        4 Port FE Switch
        Base MAC Address         : 5475.d07c.1181
        MAC Address block size   : 4
        PCB Serial Number        : FOC14210RBC
        Hardware Revision        : 6.0
        Part Number              : 73-8474-06
        Board Revision           : A0
        Top Assy. Part Number    : 800-24193-02
        Deviation Number         : 0
        Fab Version              : 05

CLEI Code                : IPUIA00RAA
RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Product (FRU) Number     : HWIC-4ESW
        Version Identifier       : V01
        Connector Type           : 01
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF CF 06 54 75 D0 7C 11 81 43 00 04 C1 8B 46
          0x10: 4F 43 31 34 32 31 30 52 42 43 40 00 56 41 06 00
          0x20: 82 49 21 1A 06 42 41 30 C0 46 03 20 00 5E 81 02
          0x30: 88 00 00 00 00 02 05 C6 8A 49 50 55 49 41 30 30
          0x40: 52 41 41 03 00 81 00 00 00 00 04 00 CB 89 48 57
          0x50: 49 43 2D 34 45 53 57 89 56 30 31 20 D9 02 C1 40
          0x60: 05 01 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        WIC Slot 1:
        E1 (2 port) Multi-Flex Trunk WAN daughter card
        Hardware revision 1.0           Board revision B0
        Serial number     36898045      Part number    800-06724-02
        FRU Part Number     VWIC-2MFT-E1=

Test history      0x0           RMA number     00-00-00
        Connector type    PCI
        EEPROM format version 1
        EEPROM contents (hex):
          0x20: 01 23 01 00 02 33 04 FD 50 1A 44 02 00 00 00 00
          0x30: 58 00 00 00 02 10 30 00 FF FF FF FF FF FF FF FF

yourname#sh controllers e1

E1 0/1/0 is down.
  Applique type is Channelized E1 - balanced
  Far End Block Errors Detected
  Receiver has loss of signal.
  alarm-trigger is not set
  Version info Firmware: 20090113, FPGA: 20, spm_count = 0
  Framing is CRC4, Line Code is HDB3, Clock Source is Line.
  Data in current interval (424 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 424 Unavail Secs
E1 0/1/1 is down. (Line Looped (inband CSU code)) (Line Loop by Remote)
  Applique type is Channelized E1 - balanced
  Receiver has loss of signal.
  alarm-trigger is not set
  Version info Firmware: 20090113, FPGA: 20, spm_count = 0
  Framing is CRC4, Line Code is HDB3, Clock Source is Line.
  Data in current interval (0 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

yourname#sh ver

Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T
2, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 19-Oct-09 17:38 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T11, RELEASE SOFTWARE (fc1)

yourname uptime is 8 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-adventerprisek9-mz.124-24.T2.bin"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2811 (revision 53.50) with 509952K/14336K bytes of memory.
Processor board ID FCZ1426705Z
6 FastEthernet interfaces
2 Channelized/Clear E1/PRI ports
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
191K bytes of non-volatile configuration memory.
126000K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102

Кто знает в чем хрень - помогите. Переустановка IOS не помогла.
Ставил:
c2800nm-adventerprisek9_ivs_li-mz.150-1.XA
c2800nm-adventerprisek9_ivs-mz.124-24.T2
c2800nm-adventerprisek9_ivs-mz.150-1.XA
c2800nm-adventerprisek9-mz.124-24.T2
c2800nm-adventerprisek9-mz.150-1.XA
c2800nm-advipservicesk9-mz.124-4.XC5

Что еще заинтересовало:
WIC Slot 1:
        [color=#BF0000]E1 (2 port)[/color] Multi-Flex Trunk WAN daughter card
        Hardware revision 1.0           Board revision B0
        Serial number     36898045      Part number    800-06724-02
        FRU Part Number     VWIC-2MFT-E1=
Видет ее как 2-х портовую.

Вариант с битой платой VWIC-2MFT-E1 не принемаю )))) т.к. 15 плат в наличии.