Илья, доброго времени суток!
Проблема не нова. На тутошнем форуме встречалась несколько раз.
http://www.opennet.dev/openforum/vsluhforumID6/16762.html
Сам недавно столкнулся, но пока не победил.
С ACL получилось?
\\
CSCsi30964 Bug Details:
Static NAT statement disappears from running-configuration
Symptoms:
On a Cisco router performing NAT, static NAT statements may disappear from the
running-configuration during operation. Any new flows requiring translation via
the missing statement may fail.
Conditions:
- This problem was first experienced in IOS 12.4(9)T.
- It has only been reported for extendable, inside source static NAT statements
for TCP ports 80 (HTTP) and 25 (SMTP), with and without a route-map:Examples:
ip nat inside source static tcp x.x.x.x 25 y.y.y.y 25 extendable
ip nat inside source static tcp x.x.x.x 25 y.y.y.y 25 extendable route-map nonat
ip nat inside source static tcp x.x.x.x 80 y.y.y.y 80 route-map nonat extendable
- After the statement disappears from the running-configuration, it is still
visible in the startup-configuration.
- Existing translations created before the disappearance are cached in the NAT
translation table and continue to work correctly.
\\
>[оверквотинг удален]
>
>CSCtf36262 , CSCtf36243
>Symptom:
>If an Access Control List (ACL) for the NAT inside local address
>and the NAT pool for the inside
>global addresses overlap, after a dynamic translation expires, the ARP entry for
>the inside global
>address is deleted. This results in the failure of outside-to-inside static translations
>that rely
>on a cached ARP entry.
Вариант для распечатки
Маршрутизаторы CISCO и др. оборудование. (Диагностика и решение проблем)
(??) on 27-Май-10, 22:58 
