Обшибка 800!!!Не могу уже...
У меня с mpd проблема, написал конфиги, но при попытке подключится с Винды - ошибка 800.
ОСь: FreeBSD 6.0 Firewall:pf
Сервер 192,168,10,1
Привожу конфиги:
mpd.conf
default:
load pptp0
pptp0:
new -i ng0 pptp0 pptp0
set ipcp ranges 192.168.10.1/32 192.168.10.75/32
load pptp_standart
pptp_standart:
set iface disable on-demand
set bundle disable multilink
set link yes acfcomp protocomp
set link no pap chap
set link enable chap
set link keep-alive 60 180
set ipcp yes vjcomp
set ipcp dns 192.168.10.1
#set ipcp nbns 10.128.1.42
set iface enable proxy-arp
set bundle enable compression
set ccp yes mppc
set ccp yes mpp-e40
set ccp yes mpp-e128
set ccp yes mpp-stateless
set bundle yes crypt-reqd
set pptp self 192.168.10.98
set pptp enable incoming
set pptp disable originate
mpd.link
pptp0:
set link type pptp
mpd.secret
"test1" test1 *
test test 192.168.10.99"
root@freebsd# ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.129.146 netmask 0xfffff000 broadcast 192.168.143.255
ether 00:30:4f:25:7a:b1
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
pfsync0: flags=0<> mtu 2020
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ng0: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
root@freebsd# cat /etc/pf.conf
ext_if_1="rl1"
int_if="rl0"
table <users> persist file "/etc/users"
nat on $ext_if_1 inet from <users> to any -> $ext_if_1
pass on $ext_if_1 all
pass on $int_if all
ЗЫ:
Опции Ядра:
....
options NETGRAPH
#netgraph(4) system
options NETGRAPH_ASYNC
options NETGRAPH_BPF
options NETGRAPH_ECHO
options NETGRAPH_ETHER
options NETGRAPH_HOLE
options NETGRAPH_IFACE
options NETGRAPH_KSOCKET
options NETGRAPH_L2TP
options NETGRAPH_LMI
# MPPC compression requires proprietary files (not included)
#options NETGRAPH_MPPC_COMPRESSION
options NETGRAPH_MPPC_ENCRYPTION
options NETGRAPH_ONE2MANY
options NETGRAPH_PPP
options NETGRAPH_PPTPGRE
options NETGRAPH_RFC1490
options NETGRAPH_SOCKET
options NETGRAPH_TEE
options NETGRAPH_TTY
options NETGRAPH_UI
options NETGRAPH_VJC