Здравствуйте!
Весь dmesg забит сообщениями:
ad0: FAILURE - unknown CMD (0xb0) status=51<READY,DSC,ERROR> error=4<ABORTED>
Судя по smartmontools с винтом все ок:
//////////////////////////////////////////////////////////////////////////////////////
smartctl -a /dev/ad0
smartctl version 5.33 [i386-portbld-freebsd6.1] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/=== START OF INFORMATION SECTION ===
Device Model: HDS722512VLAT20
Serial Number: VN631ECCDRJ3ED
Firmware Version: V33OA6MA
User Capacity: 123,521,334,784 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
Local Time is: Thu Mar 1 06:14:52 2007 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2707) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 45) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 111 111 024 Pre-fail Always - 266 (Average 271)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 595
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 10629
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 595
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 1075
193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always - 1075
194 Temperature_Celsius 0x0002 211 211 000 Old_age Always - 26 (Lifetime Min/Max 5/49)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
//////////////////////////////////////////////////////////////////////////////////////
что может быть и как проверить? Поиск нашел все одну ветку с подобной проблемой, но там тоже решения нет.