[ новости /+++ | форум | теги | ]

NAME

drv_usecwait - busy-wait for specified interval
 

SYNOPSIS

#include <sys/types.h>
#include <sys/ddi.h>



void drv_usecwait(clock_t microsecs);

INTERFACE LEVEL

Architecture independent level 1 (DDI/DKI).  

PARAMETERS

microsecs

The number of microseconds to busy-wait.

DESCRIPTION

The drv_usecwait() function gives drivers a means of busy-waiting for a specified microsecond count. The amount of time spent busy-waiting may be greater than the microsecond count but will minimally be the number of microseconds specified.

delay(9F) can be used by a driver to delay for a specified number of system ticks, but it has two limitations. First, the granularity of the wait time is limited to one clock tick, which may be more time than is needed for the delay. Second, delay(9F) can be invoked from user or kernel context and hence cannot be used at interrupt time or system initialization.

Often, drivers need to delay for only a few microseconds, waiting for a write to a device register to be picked up by the device. In this case, even in user context, delay(9F) produces too long a wait period.  

CONTEXT

The drv_usecwait() function can be called from user, interrupt, or kernel context.  

SEE ALSO

delay(9F), timeout(9F), untimeout(9F)

Writing Device Drivers  

NOTES

The driver wastes processor time by making this call since drv_usecwait() does not block but simply busy-waits. The driver should only make calls to drv_usecwait() as needed, and only for as much time as needed. The drv_usecwait() function does not mask out interrupts.

Index

NAME

SYNOPSIS

INTERFACE LEVEL

PARAMETERS

DESCRIPTION

CONTEXT

SEE ALSO

NOTES

Партнёры:

Хостинг: