xge - Neterion Xframe 10Gigabit Ethernet Network Adapter driver
/dev/xge
The xge 10 Gigabit Ethernet driver is a multi-threaded, loadable, clonable, GLD-based STREAMS driver supporting the Data Link Provider Interface, dlpi(7P), on S2IO Xframe 10-Gigabit Ethernet Network Adapter.
The xge driver functions includes controller initialization, frame transmit and receive, promiscuous and multicast support, TCP and UDP checksum offload (IPv4 and IPv6), 9622-byte jumbo frame, and error recovery and reporting.
The xge driver and hardware support the 10GBase-SR/W, LR/W, and ER/W 802.3 physical layer.
The cloning, character-special device /dev/xge is used to access all Xframe devices installed within the system.
The xge driver is managed by the dladm(1M) command line utility, which allows VLANs to be defined on top of xge instances and for xge instances to be aggregated. See dladm(1M) for more details.
The values returned by the driver in the DL_INFO_ACK primitive in response to the DL_INFO_REQ are as follows:
By default, the xge driver works without any configuration file.
You can check the running-time status of a device instance using ndd(1M). Currently, the driver provides an interface to print all hardware statistics.
For example, to print statistics of device xge0:
#ndd /dev/xge0 stats tmac_data_octets 772 tmac_frms 15 tmac_drop_frms 0 tmac_bcst_frms 6 tmac_mcst_frms 6 ... rmac_vld_frms 13 rmac_fcs_err_frms 0 rmac_drop_frms 0 rmac_vld_bcst_frms 7 rmac_vld_mcst_frms 11 rmac_out_rng_len_err_frms 0 rmac_in_rng_len_err_frms 0 rmac_long_frms 0 ... not_traffic_intr_cnt 242673 traffic_intr_cnt 28 ...
/dev/xge
See attributes(5) for descriptions of the following attributes:
|
dladm(1M), ndd(1M), attributes(5), streamio(7I), dlpi(7P)
Writing Device Drivers
STREAMS Programming Guide
Network Interfaces Programmer's Guide
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |