Партнёры:
Хостинг:
NAME
dtrmm - perform one of the matrix-matrix operations B :=
alpha*op( A )*B, or B := alpha*B*op( A )
SYNOPSIS
SUBROUTINE DTRMM ( SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A,
LDA, B, LDB )
CHARACTER*1 SIDE, UPLO, TRANSA, DIAG
INTEGER M, N, LDA, LDB
DOUBLE PRECISION ALPHA
DOUBLE PRECISION A( LDA, * ), B( LDB, * )
#include <sunperf.h>
void dtrmm(char side, char uplo, char transa, char diag, int
m, int n, double alpha, double *da, int lda, dou-
ble *db, int ldb) ;
PURPOSE
DTRMM performs one of the matrix-matrix operations B :=
alpha*op( A )*B, or B := alpha*B*op( A ) where alpha is a
scalar, B is an m by n matrix, A is a unit, or non-unit,
upper or lower triangular matrix and op( A ) is one of
op( A ) = A or op( A ) = A'.
PARAMETERS
SIDE - CHARACTER*1.
On entry, SIDE specifies whether op( A ) multi-
plies B from the left or right as follows:
SIDE = 'L' or 'l' B := alpha*op( A )*B.
SIDE = 'R' or 'r' B := alpha*B*op( A ).
Unchanged on exit.
UPLO - CHARACTER*1.
On entry, UPLO specifies whether the matrix A is
an upper or lower triangular matrix as follows:
UPLO = 'U' or 'u' A is an upper triangular
matrix.
UPLO = 'L' or 'l' A is a lower triangular
matrix.
Unchanged on exit.
TRANSA - CHARACTER*1. On entry, TRANSA specifies
the form of op( A ) to be used in the matrix mul-
tiplication as follows:
TRANSA = 'N' or 'n' op( A ) = A.
TRANSA = 'T' or 't' op( A ) = A'.
TRANSA = 'C' or 'c' op( A ) = A'.
Unchanged on exit.
DIAG - CHARACTER*1.
On entry, DIAG specifies whether or not A is unit
triangular as follows:
DIAG = 'U' or 'u' A is assumed to be unit tri-
angular.
DIAG = 'N' or 'n' A is not assumed to be unit
triangular.
Unchanged on exit.
M - INTEGER.
On entry, M specifies the number of rows of B. M
must be at least zero. Unchanged on exit.
N - INTEGER.
On entry, N specifies the number of columns of B.
N must be at least zero. Unchanged on exit.
ALPHA - DOUBLE PRECISION.
On entry, ALPHA specifies the scalar alpha. When
alpha is zero then A is not referenced and B
need not be set before entry. Unchanged on exit.
A - DOUBLE PRECISION array of DIMENSION ( LDA, k ),
where k is m
when SIDE = 'L' or 'l' and is n when SIDE =
'R' or 'r'.
Before entry with UPLO = 'U' or 'u', the lead-
ing k by k upper triangular part of the array A
must contain the upper triangular matrix and the
strictly lower triangular part of A is not refer-
enced.
Before entry with UPLO = 'L' or 'l', the lead-
ing k by k lower triangular part of the array A
must contain the lower triangular matrix and the
strictly upper triangular part of A is not refer-
enced.
Note that when DIAG = 'U' or 'u', the diagonal
elements of A are not referenced either, but are
assumed to be unity. Unchanged on exit.
LDA - INTEGER.
On entry, LDA specifies the first dimension of A
as declared in the calling (sub) program. When
SIDE = 'L' or 'l' then LDA must be at least
max( 1, m ), when SIDE = 'R' or 'r' then LDA
must be at least max( 1, n ). Unchanged on exit.
B - DOUBLE PRECISION array of DIMENSION ( LDB, n ).
Before entry, the leading m by n part of the
array B must contain the matrix B, and on exit
is overwritten by the transformed matrix.
LDB - INTEGER.
On entry, LDB specifies the first dimension of B
as declared in the calling (sub) program.
LDB must be at least max( 1, m ). Unchanged
on exit.
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |