Партнёры:
Хостинг:
NAME
cancellation - overview of concepts related to POSIX thread
cancellation
DESCRIPTION
____________________________________________________________
| FUNCTION | ACTION |
| pthread_cancel | Cancels thread execution. |
| pthread_setcancelstate| Sets the cancellation state of a|
| | thread. |
| pthread_setcanceltype | Sets the cancellation type of a|
| | thread. |
| pthread_testcancel | Creates a cancellation point in|
| | the calling thread. |
| pthread_cleanup_push | Pushes a cleanup handler routine.|
| pthread_cleanup_pop | Pops a cleanup handler routine. |
|_______________________|___________________________________|
Cancellation
Thread cancellation allows a thread to terminate the execu-
tion of
any application thread in the process. Cancellation is use-
ful when further operations of one or more threads are
undesirable or unnecessary.
An example of a situation that could benefit from using can-
cellation is an asynchronously-generated cancel condition
such as a user requesting to close or exit some running
operation. Another example is the completion of a task
undertaken by a number of threads, such as solving a maze.
While many threads search for the solution, one of the
threads might solve the puzzle while the others continue to
operate. Since they are serving no purpose at that point,
they should all be canceled.
Planning Steps
Planning and programming for most cancellations follow this
pattern:
1. Identify which threads you want to cancel, and insert
pthread_cancel(3THR) statements.
2. Identify system-defined cancellation points where a
thread that might be canceled could have changed system
or program state that should be restored. See the Can-
cellation Points for a list.
3. When a thread changes the system or program state just
before a cancellation point, and should restore that
state before the thread is canceled, place a cleanup
handler before the cancellation point with
pthread_cleanup_push(3THR). Wherever a thread restores
the changed state, pop the cleanup handler from the
cleanup stack with pthread_cleanup_pop(3THR).
4. Know whether the threads you are canceling call into
cancel-unsafe libraries, and disable cancellation with
pthread_setcancelstate(3THR) before the call into the
library. See Cancellation State and Cancel-Safe.
5. To cancel a thread in a procedure that contains no can-
cellation points, insert your own cancellation points
with pthread_testcancel(3THR). pthread_testcancel(3THR)
creates cancellation points by testing for pending can-
cellations and performing those cancellations if they are
found. Push and pop cleanup handlers around the cancella-
tion point, if necessary (see Step 3, above).
Cancellation Points
The system defines certain points at which cancellation can
occur (cancellation points), and you can create additional
cancellation points in your application with
pthread_testcancel(3THR).
The following cancellation points are defined by the system
(system-defined cancellation points): aio_suspend(3RT),
close(2), creat(2), getmsg(2), getpmsg(2), lockf(3C),
mq_receive(3RT), mq_send(3RT), msgrcv(2), msgsnd(2),
msync(3C), nanosleep(3RT), open(2), pause(2), poll(2),
pread(2), pthread_cond_timedwait(3THR),
pthread_cond_wait(3THR), pthread_join(3THR),
pthread_testcancel(3THR), putmsg(2), putpmsg(2), pwrite(2),
read(2), readv(2), select(3C), sem_wait(3RT), sigpause(3C),
sigwaitinfo(3RT), sigsuspend(2), sigtimedwait(3RT),
sigwait(2), sleep(3C), sync(2), system(3C), tcdrain(3C),
usleep(3C), wait(2), waitid(2) waitpid(2), wait3(3C),
write(2), writev(2), and
fcntl(2), when specifying F_SETLKW as the command
When cancellation is asynchronous, cancellation can occur
before, during, or after the execution of the function
defined as the cancellation point. When cancellation is
deferred (the default case), cancellation occurs before the
function defined as the cancellation point executes. See
Cancellation Type for more information about deferred and
asynchronous cancellation.
Choosing where to place cancellation points and understand-
ing how cancellation affects your program depend upon your
understanding of both your application and of cancellation
mechanics.
Typically, any call that might require a long wait should be
a cancellation point. Operations need to check for pending
cancellation requests when the operation is about to block
indefinitely. This includes threads waiting in
pthread_cond_wait(3THR) and pthread_cond_timedwait(3THR),
threads waiting for the termination of another thread in
pthread_join(3THR), and threads blocked on sigwait(2).
A mutex is explicitly not a cancellation point and should
be held for only the minimal essential time.
Most of the dangers in performing cancellations deal with
properly restoring invariants and freeing shared resources.
For example, a carelessly canceled thread might leave a
mutex in a locked state, leading to a deadlock. Or it might
leave a region of memory allocated with no way to identify
it and therefore no way to free it.
Cleanup Handlers
When a thread is canceled, it should release resources and
clean up the state that is shared with other threads. So,
whenever a thread that might be canceled changes the state
of the system or of the program, be sure to push a cleanup
handler with pthread_cleanup_push(3THR) before the cancella-
tion point.
When a thread is canceled, all the currently-stacked cleanup
handlers are executed in last-in-first-out (LIFO) order.
Each handler is run in the scope in which it was pushed.
When the last cleanup handler returns, the thread-specific
data destructor functions are called. Thread execution ter-
minates when the last destructor function returns.
When, in the normal course of the program, an uncanceled
thread restores state that it had previously changed, be
sure to pop the cleanup handler (that you had set up where
the change took place) using pthread_cleanup_pop(3THR). That
way, if the thread is canceled later, only currently-changed
state will be restored by the handlers that are left in the
stack.
Be sure to pop the handler in the same scope in which it was
pushed. Also, make sure that each push statement has a
matching pop statement, or compiler errors will be gen-
erated.
Cancellation State
Most programmers will use only the default cancellation
state of PTHREAD_CANCEL_ENABLE, but can choose to change
the state by using pthread_setcancelstate(3THR), which
determines whether a thread is cancelable at all. With the
default state of PTHREAD_CANCEL_ENABLE, cancellation is
enabled, and the thread is cancelable at points determined
by its cancellation type. See Cancellation Type.
If the state is PTHREAD_CANCEL_DISABLE, cancellation is dis-
abled, and the thread is not cancelable at any point - all
cancellation requests to it are held pending.
You might want to disable cancellation before a call to a
cancel-unsafe library, restoring the old cancel state when
the call returns from the library. See Cancel-Safe for
explanations of cancel safety.
Cancellation Type
A thread's cancellation type is set with
pthread_setcanceltype(3THR), and determines whether the
thread can be canceled anywhere in its execution, or only at
cancellation points.
With the default type of PTHREAD_CANCEL_DEFERRED, the
thread is cancelable only at cancellation points, and then
only when cancellation is enabled.
If the type is PTHREAD_CANCEL_ASYNCHRONOUS, the thread is
cancelable at any point in its execution (assuming, of
course, that cancellation is enabled). Try to limit regions
of asynchronous cancellation to sequences with no external
dependencies that could result in dangling resources or
unresolved state conditions. Using asynchronous cancellation
is discouraged because of the danger involved in trying to
guarantee correct cleanup handling at absolutely every point
in the program.
_______________________________________________________________
Cancellation
Type/State Table
Type State
Enabled (Default) Disabled
Deferred (Default) Cancellation All cancellation
occurs when the requests to the
target thread target thread are
reaches a cancel- held pending.
lation point and a
cancel is pending.
(Default)
Asynchronous Receipt of a All cancellation
pthread_cancel(3T) requests to the
call causes target thread are
immediate cancel- held pending; as
lation. soon as cancella-
tion is re-
enabled, pending
cancellations are
executed immedi-
ately.
_______________________________________________________________
| | | |
| | | |
Cancel-Safe | | |
|With the arrival of| POSIX cancellation, the cancel-safe |
|level has been added to the list of MT-Safety levels See |
|Intro(3). An application or library is cancel-safe whenever |
|it has arranged for cleanup handlers to restore system or |
|program state wherever cancellation can occur. The applica- |
|tion or library is specifically Deferred-_ancel-safe when it |
|is cancel-safe for| threads whose cancellation type is |
|PTHREAD_CANCEL_DEFERRED See | |
| Cancellation State. It is specifically Asynchronous- |
|cancel-safe when it is cancel-safe for threads whose cancel- |
|lation type is PTHREAD_CANCEL_ASYNCHRONOUS. |
| | | |
|Obviously, it is easier to arrange for deferred cancel |
|safety, as this requires system and program state protection |
|only around cancellation points. In general, expect that |
|most applications |and libraries are |not Asynchronous- |
|cancel-safe. | | |
| | | |
POSIX Threads Only | | |
Note: The cancellation functions described in this reference
page are available for POSIX threads, only (the Solaris
threads interfaces do not provide cancellation functions).
EXAMPLES
Example 1: The following short C++ example shows the
pushing/popping of cancellation handlers, the
disabling/enabling of cancellation, the use of
pthread_testcancel(), and so on. The free_res() cancella-
tion handler in this example is a dummy function that simply
prints a message, but that would free resources in a real
application. The function f2() is called from the main
thread, and goes deep into its call stack by calling itself
recursively.
Before f2() starts running, the newly created thread has
probably posted a cancellation on the main thread since the
main thread calls thr_yield() right after creating thread2.
Because cancellation was initially disabled in the main
thread, through a call to pthread_setcancelstate(), the call
to f2() from main() continues and constructs X at each
recursive call, even though the main thread has a pending
cancellation.
When f2() is called for the fifty-first time (when "i ==
50"), f2() enables cancellation by calling
pthread_setcancelstate(). It then establishes a cancellation
point for itself by calling pthread_testcancel(). (Because
a cancellation is pending, a call to a cancellation point
such as read(2) or write(2) would also cancel the caller
here.)
After the main() thread is canceled at the fifty-first
iteration, all the cleanup handlers that were pushed are
called in sequence; this is indicated by the calls to
free_res() and the calls to the destructor for X. At each
level, the C++ runtime calls the destructor for X and then
the cancellation handler, free_res(). The print messages
from free_res() and X's destructor show the sequence of
calls.
At the end, the main thread is joined by thread2. Because
the main thread was canceled, its return status from
pthread_join() is PTHREAD_CANCELED. After the status is
printed, thread2 returns, killing the process (since it is
the last thread in the process).
#include <pthread.h>
#include <sched.h>
extern "C" void thr_yield(void);
extern "C" void printf(...);
struct X {
int x;
X(int i){x = i; printf("X(%d) constructed.\n", i);}
~X(){ printf("X(%d) destroyed.\n", x);}
};
void
free_res(void *i)
{
printf("Freeing `%d`\n",i);
}
char* f2(int i)
{
try {
X dummy(i);
pthread_cleanup_push(free_res, (void *)i);
if (i == 50) {
pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL);
pthread_testcancel();
}
f2(i+1);
pthread_cleanup_pop(0);
}
catch (int) {
printf("Error: In handler.\n");
}
return "f2";
}
void *
thread2(void *tid)
{
void *sts;
printf("I am new thread :%d\n", pthread_self());
pthread_cancel((pthread_t)tid);
pthread_join((pthread_t)tid, &sts);
printf("main thread cancelled due to %d\n", sts);
return (sts);
}
main()
{
pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, NULL);
pthread_create(NULL, NULL, thread2, (void *)pthread_self());
thr_yield();
printf("Returned from %s\n",f2(0));
}
ATTRIBUTES
See attributes(5) for descriptions of the following attri-
butes:
____________________________________________________________
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|_____________________________|_____________________________|
| MT-Level | MT-Safe |
|_____________________________|_____________________________|
SEE ALSO
read(2), sigwait(2), write(2), Intro(3), condition(3THR),
pthread_cleanup_pop(3THR), pthread_cleanup_push(3THR),
pthread_exit(3THR), pthread_join(3THR),
pthread_setcancelstate(3THR), pthread_setcanceltype(3THR),
pthread_testcancel(3THR), setjmp(3C), attributes(5), stan-
dards(5)
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |