[ новости /+++ | форум | теги | ]

NAME

installboot - install bootblocks in a disk partition
 

SYNOPSIS

installboot [-F zfs|ufs|hsfs] bootblk raw-disk-device

DESCRIPTION

The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition. This program is filesystem-specific, and must match the type of filesystem on the disk to be booted.

The boot objects are platform-dependent and reside in the /usr/platform/platform-name/lib/fs/file-system directory. The platform name can be found using the -i option of uname(1). The filesystem type can be found using:

% fstyp raw-disk-device

See fstyp(1M).

The installboot utility is a SPARC only program. It is not supported on the x86 architecture. x86 users should use installgrub(1M) instead.  

OPTIONS

The following option is supported:

-F zfs|ufs|hsfs

Specifies the file system type of the boot block to be installed. Required if you wish to specify zfs or hsfs. The default is ufs.

OPERANDS

bootblk

The name of the bootblock code.

raw-disk-device

The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is readable and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.

EXAMPLES

Example 1 Installing UFS Boot Block

To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:

# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk \
        /dev/rdsk/c1t0d0s0

Example 2 Installing ZFS Boot Block

To install a ZFS boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use syntax such as the following:

# installboot -F zfs /usr/platform/`uname -i`/lib/fs/zfs/bootblk \
     /dev/rdsk/c0t1d0s0

FILES

/usr/platform/platform-name/lib/fs/

Directory where boot objects reside.

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE ATTRIBUTE VALUE Availability SUNWcsu

SEE ALSO

od(1), uname(1), boot(1M), fstyp(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)

WARNINGS

The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.

Index

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

OPERANDS

EXAMPLES

FILES

ATTRIBUTES

SEE ALSO

WARNINGS

Партнёры:

Хостинг: