[ новости /+++ | форум | теги | ]

NAME

lufslist - list configuration of a boot environment
 

SYNOPSIS

/usr/sbin/lufslist [-l error_log] [-o outfile] BE_name [-X]

DESCRIPTION

The lufslist command is part of a suite of commands that make up the Live Upgrade feature of the Solaris operating environment. See live_upgrade(5) for a description of the Live Upgrade feature.

The lufslist command lists the configuration of a boot environment (BE). The output contains the disk slice (file system), file system type, and file system size for each BE mount point. The output also notes any separate file systems that belong to a non-global zone inside the BE being displayed.

The following is an example of lufslist output, which shows a separate filesystem for the zone, zone1, within the BE being displayed.

# lufslist BE_name
Filesystem                fstype       size(Mb) Mounted on
------------------------------------------------------------------
/dev/dsk/c0t0d0s1         swap           512.11 -
/dev/dsk/c0t4d0s3         ufs           3738.29 /
/dev/dsk/c0t4d0s4         ufs            510.24 /opt

              zone zone1 within boot environment BE_name
/dev/dsk/c0t4d0s7         ufs           7000.48 /export

File system type can be ufs, swap, or vxfs, for a Veritas file system. Under the Filesystem heading can be a disk slice or a logical device, such as a disk metadevice used by volume management software.

The lufslist command requires root privileges or the Primary Administrator role.  

OPTIONS

The lufslist command has the following options:

-l error_log

Error and status messages are sent to error_log, in addition to where they are sent in your current environment.

-o outfile

All command output is sent to outfile, in addition to where it is sent in your current environment.

-X

Enable XML output. Characteristics of XML are defined in DTD, in /usr/share/lib/xml/dtd/lu_cli.dtd.<num>, where <num> is the version number of the DTD file.

OPERANDS

BE_name

Name of the BE for which file systems are to be reported. You cannot specify a BE that is involved in another Live Upgrade operation.

EXIT STATUS

The following exit values are returned:

0

Successful completion.

>0

An error occurred.

FILES

/etc/lutab

list of BEs on the system

/usr/share/lib/xml/dtd/lu_cli.dtd.<num>

Live Upgrade DTD (see -X option)

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE ATTRIBUTE VALUE Availability SUNWluu

SEE ALSO

luactivate(1M), lucancel(1M), lucompare(1M), lucreate(1M), lucurr(1M), ludelete(1M), ludesc(1M), lumake(1M), lumount(1M), lurename(1M), lustatus(1M), luupgrade(1M), lutab(4), attributes(5), live_upgrade(5), zones(5)

Index

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

OPERANDS

EXIT STATUS

FILES

ATTRIBUTES

SEE ALSO

Партнёры:

Хостинг: