Партнёры:
Хостинг:
perlthrtut - tutorial on threads in Perl
There is another older Perl threading flavour called the 5.005 model, unsurprisingly for 5.005 versions of Perl. The old model is known to have problems, deprecated, and will probably be removed around release 5.10. You are strongly encouraged to migrate any existing 5.005 threads code to the new model as soon as possible.
You can see which (or neither) threading flavour you have by running "perl -V" and looking at the "Platform" section. If you have "useithreads=define" you have ithreads, if you have "use5005threads=define" you have 5.005 threads. If you have neither, you don't have any thread support built in. If you have both, you are in trouble.
The user-level interface to the 5.005 threads was via the Threads class, while ithreads uses the threads class. Note the change in case.
Sounds an awful lot like a process, doesn't it? Well, it should. Threads are one of the pieces of a process. Every process has at least one thread and, up until now, every process running Perl had only one thread. With 5.8, though, you can create extra threads. We're going to show you how, when, and why.
This model is common in GUI and server programs, where a main thread waits for some event and then passes that event to the appropriate worker threads for processing. Once the event has been passed on, the boss thread goes back to waiting for another event.
The boss thread does relatively little work. While tasks aren't necessarily performed faster than with any other method, it tends to have the best user-response times.
This model is particularly useful if the system running the program will distribute multiple threads across different processors. It can also be useful in ray tracing or rendering engines, where the individual threads can pass on interim results to give the user visual feedback.
This model makes the most sense if you have multiple processors so two or more threads will be executing in parallel, though it can often make sense in other contexts as well. It tends to keep the individual tasks small and simple, as well as allowing some parts of the pipeline to block (on I/O or system calls, for example) while other parts keep going. If you're running different parts of the pipeline on different processors you may also take advantage of the caches on each processor.
This model is also handy for a form of recursive programming where, rather than having a subroutine call itself, it instead creates another thread. Prime and Fibonacci generators both map well to this form of the pipeline model. (A version of a prime number generator is presented later on.)
This is not to say that Perl threads are completely different from everything that's ever come before---they're not. Perl's threading model owes a lot to other thread models, especially POSIX. Just as Perl is not C, though, Perl threads are not POSIX threads. So if you find yourself looking for mutexes, or thread priorities, it's time to step back a bit and think about what you want to do and how Perl can do it.
However it is important to remember that Perl threads cannot magically do things unless your operating systems threads allows it. So if your system blocks the entire process on sleep(), Perl usually will as well.
Not all modules that you might use are thread-safe, and you should always assume a module is unsafe unless the documentation says otherwise. This includes modules that are distributed as part of the core. Threads are a new feature, and even some of the standard modules aren't thread-safe.
Even if a module is thread-safe, it doesn't mean that the module is optimized to work well with threads. A module could possibly be rewritten to utilize the new features in threaded Perl to increase performance in a threaded environment.
If you're using a module that's not thread-safe for some reason, you can protect yourself by using it from one, and only one thread at all. If you need multiple threads to access such a module, you can use semaphores and lots of programming discipline to control access to it. Semaphores are covered in ``Basic semaphores''.
See also ``Thread-Safety of System Libraries''.
Your programs can use the Config module to check whether threads are enabled. If your program can't run without them, you can say something like:
$Config{useithreads} or die "Recompile Perl with threads to run this program.";
A possibly-threaded program using a possibly-threaded module might have code like this:
use Config;
use MyMod;
BEGIN {
if ($Config{useithreads}) {
# We have threads
require MyMod_threaded;
import MyMod_threaded;
} else {
require MyMod_unthreaded;
import MyMod_unthreaded;
}
}
Since code that runs both with and without threads is usually pretty messy, it's best to isolate the thread-specific code in its own module. In our example above, that's what MyMod_threaded is, and it's only imported if we're running on a threaded Perl.
The simplest, most straightforward way to create a thread is with new():
use threads;
$thr = threads->new(\&sub1);
sub sub1 {
print "In the thread\n";
}
The new() method takes a reference to a subroutine and creates a new thread, which starts executing in the referenced subroutine. Control then passes both to the subroutine and the caller.
If you need to, your program can pass parameters to the subroutine as part of the thread startup. Just include the list of parameters as part of the "threads::new" call, like this:
use threads;
$Param3 = "foo";
$thr = threads->new(\&sub1, "Param 1", "Param 2", $Param3);
$thr = threads->new(\&sub1, @ParamList);
$thr = threads->new(\&sub1, qw(Param1 Param2 Param3));
sub sub1 {
my @InboundParameters = @_;
print "In the thread\n";
print "got parameters >", join("<>", @InboundParameters), "<\n";
}
The last example illustrates another feature of threads. You can spawn off several threads using the same subroutine. Each thread executes the same subroutine, but in a separate thread with a separate environment and potentially separate arguments.
"create()" is a synonym for "new()".
use threads;
$thr = threads->new(\&sub1);
@ReturnData = $thr->join;
print "Thread returned @ReturnData";
sub sub1 { return "Fifty-six", "foo", 2; }
In the example above, the join() method returns as soon as the thread ends. In addition to waiting for a thread to finish and gathering up any values that the thread might have returned, join() also performs any OS cleanup necessary for the thread. That cleanup might be important, especially for long-running programs that spawn lots of threads. If you don't want the return values and don't want to wait for the thread to finish, you should call the detach() method instead, as described next.
In this case, you use the detach() method. Once a thread is detached, it'll run until it's finished, then Perl will clean up after it automatically.
use threads;
$thr = threads->new(\&sub1); # Spawn the thread
$thr->detach; # Now we officially don't care any more
sub sub1 {
$a = 0;
while (1) {
$a++;
print "\$a is $a\n";
sleep 1;
}
}
Once a thread is detached, it may not be joined, and any return data that it might have produced (if it was done and waiting for a join) is lost.
To make use of threading however, one usually wants the threads to share at least some data between themselves. This is done with the threads::shared module and the " : shared" attribute:
use threads;
use threads::shared;
my $foo : shared = 1;
my $bar = 1;
threads->new(sub { $foo++; $bar++ })->join;
print "$foo\n"; #prints 2 since $foo is shared
print "$bar\n"; #prints 1 since $bar is not shared
In the case of a shared array, all the array's elements are shared, and for a shared hash, all the keys and values are shared. This places restrictions on what may be assigned to shared array and hash elements: only simple values or references to shared variables are allowed - this is so that a private variable can't accidentally become shared. A bad assignment will cause the thread to die. For example:
use threads;
use threads::shared;
my $var = 1;
my $svar : shared = 2;
my %hash : shared;
... create some threads ...
$hash{a} = 1; # all threads see exists($hash{a}) and $hash{a} == 1
$hash{a} = $var # okay - copy-by-value: same effect as previous
$hash{a} = $svar # okay - copy-by-value: same effect as previous
$hash{a} = \$svar # okay - a reference to a shared variable
$hash{a} = \$var # This will die
delete $hash{a} # okay - all threads will see !exists($hash{a})
Note that a shared variable guarantees that if two or more threads try to modify it at the same time, the internal state of the variable will not become corrupted. However, there are no guarantees beyond this, as explained in the next section.
use threads;
use threads::shared;
my $a : shared = 1;
$thr1 = threads->new(\&sub1);
$thr2 = threads->new(\&sub2);
$thr1->join;
$thr2->join;
print "$a\n";
sub sub1 { my $foo = $a; $a = $foo + 1; }
sub sub2 { my $bar = $a; $a = $bar + 1; }
What do you think $a will be? The answer, unfortunately, is ``it depends.'' Both sub1() and sub2() access the global variable $a, once to read and once to write. Depending on factors ranging from your thread implementation's scheduling algorithm to the phase of the moon, $a can be 2 or 3.
Race conditions are caused by unsynchronized access to shared data. Without explicit synchronization, there's no way to be sure that nothing has happened to the shared data between the time you access it and the time you update it. Even this simple code fragment has the possibility of error:
use threads;
my $a : shared = 2;
my $b : shared;
my $c : shared;
my $thr1 = threads->create(sub { $b = $a; $a = $b + 1; });
my $thr2 = threads->create(sub { $c = $a; $a = $c + 1; });
$thr1->join;
$thr2->join;
Two threads both access $a. Each thread can potentially be interrupted at any point, or be executed in any order. At the end, $a could be 3 or 4, and both $b and $c could be 2 or 3.
Even "$a += 5" or "$a++" are not guaranteed to be atomic.
Whenever your program accesses data or resources that can be accessed by other threads, you must take steps to coordinate access or risk data inconsistency and race conditions. Note that Perl will protect its internals from your race conditions, but it won't protect you from you.
use threads;
use threads::shared;
my $total : shared = 0;
sub calc {
for (;;) {
my $result;
# (... do some calculations and set $result ...)
{
lock($total); # block until we obtain the lock
$total += $result;
} # lock implicitly released at end of scope
last if $result == 0;
}
}
my $thr1 = threads->new(\&calc);
my $thr2 = threads->new(\&calc);
my $thr3 = threads->new(\&calc);
$thr1->join;
$thr2->join;
$thr3->join;
print "total=$total\n";
lock() blocks the thread until the variable being locked is available. When lock() returns, your thread can be sure that no other thread can lock that variable until the outermost block containing the lock exits.
It's important to note that locks don't prevent access to the variable in question, only lock attempts. This is in keeping with Perl's longstanding tradition of courteous programming, and the advisory file locking that flock() gives you.
You may lock arrays and hashes as well as scalars. Locking an array, though, will not block subsequent locks on array elements, just lock attempts on the array itself.
Locks are recursive, which means it's okay for a thread to lock a variable more than once. The lock will last until the outermost lock() on the variable goes out of scope. For example:
my $x : shared;
doit();
sub doit {
{
{
lock($x); # wait for lock
lock($x); # NOOP - we already have the lock
{
lock($x); # NOOP
{
lock($x); # NOOP
lockit_some_more();
}
}
} # *** implicit unlock here ***
}
}
sub lockit_some_more {
lock($x); # NOOP
} # nothing happens here
Note that there is no unlock() function - the only way to unlock a variable is to allow it to go out of scope.
A lock can either be used to guard the data contained within the variable being locked, or it can be used to guard something else, like a section of code. In this latter case, the variable in question does not hold any useful data, and exists only for the purpose of being locked. In this respect, the variable behaves like the mutexes and basic semaphores of traditional thread libraries.
use threads;
my $a : shared = 4;
my $b : shared = "foo";
my $thr1 = threads->new(sub {
lock($a);
sleep 20;
lock($b);
});
my $thr2 = threads->new(sub {
lock($b);
sleep 20;
lock($a);
});
This program will probably hang until you kill it. The only way it won't hang is if one of the two threads acquires both locks first. A guaranteed-to-hang version is more complicated, but the principle is the same.
The first thread will grab a lock on $a, then, after a pause during which the second thread has probably had time to do some work, try to grab a lock on $b. Meanwhile, the second thread grabs a lock on $b, then later tries to grab a lock on $a. The second lock attempt for both threads will block, each waiting for the other to release its lock.
This condition is called a deadlock, and it occurs whenever two or more threads are trying to get locks on resources that the others own. Each thread will block, waiting for the other to release a lock on a resource. That never happens, though, since the thread with the resource is itself waiting for a lock to be released.
There are a number of ways to handle this sort of problem. The best way is to always have all threads acquire locks in the exact same order. If, for example, you lock variables $a, $b, and $c, always lock $a before $b, and $b before $c. It's also best to hold on to locks for as short a period of time to minimize the risks of deadlock.
The other synchronization primitives described below can suffer from similar problems.
use threads;
use Thread::Queue;
my $DataQueue = Thread::Queue->new;
$thr = threads->new(sub {
while ($DataElement = $DataQueue->dequeue) {
print "Popped $DataElement off the queue\n";
}
});
$DataQueue->enqueue(12);
$DataQueue->enqueue("A", "B", "C");
$DataQueue->enqueue(\$thr);
sleep 10;
$DataQueue->enqueue(undef);
$thr->join;
You create the queue with "new Thread::Queue". Then you can add lists of scalars onto the end with enqueue(), and pop scalars off the front of it with dequeue(). A queue has no fixed size, and can grow as needed to hold everything pushed on to it.
If a queue is empty, dequeue() blocks until another thread enqueues something. This makes queues ideal for event loops and other communications between threads.
use threads;
use Thread::Semaphore;
my $semaphore = new Thread::Semaphore;
my $GlobalVariable : shared = 0;
$thr1 = new threads \&sample_sub, 1;
$thr2 = new threads \&sample_sub, 2;
$thr3 = new threads \&sample_sub, 3;
sub sample_sub {
my $SubNumber = shift @_;
my $TryCount = 10;
my $LocalCopy;
sleep 1;
while ($TryCount--) {
$semaphore->down;
$LocalCopy = $GlobalVariable;
print "$TryCount tries left for sub $SubNumber (\$GlobalVariable is $GlobalVariable)\n";
sleep 2;
$LocalCopy++;
$GlobalVariable = $LocalCopy;
$semaphore->up;
}
}
$thr1->join;
$thr2->join;
$thr3->join;
The three invocations of the subroutine all operate in sync. The semaphore, though, makes sure that only one thread is accessing the global variable at once.
Each semaphore has a counter attached to it. By default, semaphores are created with the counter set to one, down() decrements the counter by one, and up() increments by one. However, we can override any or all of these defaults simply by passing in different values:
use threads;
use Thread::Semaphore;
my $semaphore = Thread::Semaphore->new(5);
# Creates a semaphore with the counter set to five
$thr1 = threads->new(\&sub1);
$thr2 = threads->new(\&sub1);
sub sub1 {
$semaphore->down(5); # Decrements the counter by five
# Do stuff here
$semaphore->up(5); # Increment the counter by five
}
$thr1->detach;
$thr2->detach;
If down() attempts to decrement the counter below zero, it blocks until the counter is large enough. Note that while a semaphore can be created with a starting count of zero, any up() or down() always changes the counter by at least one, and so $semaphore->down(0) is the same as $semaphore->down(1).
The question, of course, is why would you do something like this? Why create a semaphore with a starting count that's not one, or why decrement/increment it by more than one? The answer is resource availability. Many resources that you want to manage access for can be safely used by more than one thread at once.
For example, let's take a GUI driven program. It has a semaphore that it uses to synchronize access to the display, so only one thread is ever drawing at once. Handy, but of course you don't want any thread to start drawing until things are properly set up. In this case, you can create a semaphore with a counter set to zero, and up it when things are ready for drawing.
Semaphores with counters greater than one are also useful for establishing quotas. Say, for example, that you have a number of threads that can do I/O at once. You don't want all the threads reading or writing at once though, since that can potentially swamp your I/O channels, or deplete your process' quota of filehandles. You can use a semaphore initialized to the number of concurrent I/O requests (or open files) that you want at any one time, and have your threads quietly block and unblock themselves.
Larger increments or decrements are handy in those cases where a thread needs to check out or return a number of resources at once.
Perl's threading package provides the yield() function that does this. yield() is pretty straightforward, and works like this:
use threads;
sub loop {
my $thread = shift;
my $foo = 50;
while($foo--) { print "in thread $thread\n" }
threads->yield;
$foo = 50;
while($foo--) { print "in thread $thread\n" }
}
my $thread1 = threads->new(\&loop, 'first');
my $thread2 = threads->new(\&loop, 'second');
my $thread3 = threads->new(\&loop, 'third');
It is important to remember that yield() is only a hint to give up the CPU, it depends on your hardware, OS and threading libraries what actually happens. On many operating systems, yield() is a no-op. Therefore it is important to note that one should not build the scheduling of the threads around yield() calls. It might work on your platform but it won't work on another platform.
Thread objects also have an overloaded == comparison so that you can do comparison on them as you would with normal objects.
# Loop through all the threads
foreach $thr (threads->list) {
# Don't join the main thread or ourselves
if ($thr->tid && !threads::equal($thr, threads->self)) {
$thr->join;
}
}
If some threads have not finished running when the main Perl thread ends, Perl will warn you about it and die, since it is impossible for Perl to clean up itself while other threads are running
1 #!/usr/bin/perl -w
2 # prime-pthread, courtesy of Tom Christiansen
3
4 use strict;
5
6 use threads;
7 use Thread::Queue;
8
9 my $stream = new Thread::Queue;
10 my $kid = new threads(\&check_num, $stream, 2);
11
12 for my $i ( 3 .. 1000 ) {
13 $stream->enqueue($i);
14 }
15
16 $stream->enqueue(undef);
17 $kid->join;
18
19 sub check_num {
20 my ($upstream, $cur_prime) = @_;
21 my $kid;
22 my $downstream = new Thread::Queue;
23 while (my $num = $upstream->dequeue) {
24 next unless $num % $cur_prime;
25 if ($kid) {
26 $downstream->enqueue($num);
27 } else {
28 print "Found prime $num\n";
29 $kid = new threads(\&check_num, $downstream, $num);
30 }
31 }
32 $downstream->enqueue(undef) if $kid;
33 $kid->join if $kid;
34 }
This program uses the pipeline model to generate prime numbers. Each thread in the pipeline has an input queue that feeds numbers to be checked, a prime number that it's responsible for, and an output queue into which it funnels numbers that have failed the check. If the thread has a number that's failed its check and there's no child thread, then the thread must have found a new prime number. In that case, a new child thread is created for that prime and stuck on the end of the pipeline.
This probably sounds a bit more confusing than it really is, so let's go through this program piece by piece and see what it does. (For those of you who might be trying to remember exactly what a prime number is, it's a number that's only evenly divisible by itself and 1)
The bulk of the work is done by the check_num() subroutine, which takes a reference to its input queue and a prime number that it's responsible for. After pulling in the input queue and the prime that the subroutine's checking (line 20), we create a new queue (line 22) and reserve a scalar for the thread that we're likely to create later (line 21).
The while loop from lines 23 to line 31 grabs a scalar off the input queue and checks against the prime this thread is responsible for. Line 24 checks to see if there's a remainder when we modulo the number to be checked against our prime. If there is one, the number must not be evenly divisible by our prime, so we need to either pass it on to the next thread if we've created one (line 26) or create a new thread if we haven't.
The new thread creation is line 29. We pass on to it a reference to the queue we've created, and the prime number we've found.
Finally, once the loop terminates (because we got a 0 or undef in the queue, which serves as a note to die), we pass on the notice to our child and wait for it to exit if we've created a child (lines 32 and 37).
Meanwhile, back in the main thread, we create a queue (line 9) and the initial child thread (line 10), and pre-seed it with the first prime: 2. Then we queue all the numbers from 3 to 1000 for checking (lines 12-14), then queue a die notice (line 16) and wait for the first child thread to terminate (line 17). Because a child won't die until its child has died, we know that we're done once we return from the join.
That's how it works. It's pretty simple; as with many Perl programs, the explanation is much longer than the program.
User-mode threads are threads that live entirely within a program and its libraries. In this model, the OS knows nothing about threads. As far as it's concerned, your process is just a process.
This is the easiest way to implement threads, and the way most OSes start. The big disadvantage is that, since the OS knows nothing about threads, if one thread blocks they all do. Typical blocking activities include most system calls, most I/O, and things like sleep().
Kernel threads are the next step in thread evolution. The OS knows about kernel threads, and makes allowances for them. The main difference between a kernel thread and a user-mode thread is blocking. With kernel threads, things that block a single thread don't block other threads. This is not the case with user-mode threads, where the kernel blocks at the process level and not the thread level.
This is a big step forward, and can give a threaded program quite a performance boost over non-threaded programs. Threads that block performing I/O, for example, won't block threads that are doing other things. Each process still has only one thread running at once, though, regardless of how many CPUs a system might have.
Since kernel threading can interrupt a thread at any time, they will uncover some of the implicit locking assumptions you may make in your program. For example, something as simple as "$a = $a + 2" can behave unpredictably with kernel threads if $a is visible to other threads, as another thread may have changed $a between the time it was fetched on the right hand side and the time the new value is stored.
Multiprocessor kernel threads are the final step in thread support. With multiprocessor kernel threads on a machine with multiple CPUs, the OS may schedule two or more threads to run simultaneously on different CPUs.
This can give a serious performance boost to your threaded program, since more than one thread will be executing at the same time. As a tradeoff, though, any of those nagging synchronization issues that might not have shown with basic kernel threads will appear with a vengeance.
In addition to the different levels of OS involvement in threads, different OSes (and different thread implementations for a particular OS) allocate CPU cycles to threads in different ways.
Cooperative multitasking systems have running threads give up control if one of two things happen. If a thread calls a yield function, it gives up control. It also gives up control if the thread does something that would cause it to block, such as perform I/O. In a cooperative multitasking implementation, one thread can starve all the others for CPU time if it so chooses.
Preemptive multitasking systems interrupt threads at regular intervals while the system decides which thread should run next. In a preemptive multitasking system, one thread usually won't monopolize the CPU.
On some systems, there can be cooperative and preemptive threads running simultaneously. (Threads running with realtime priorities often behave cooperatively, for example, while threads running at normal priorities behave preemptively.)
Most modern operating systems support preemptive multitasking nowadays.
Also note that under the current implementation, shared variables use a little more memory and are a little slower than ordinary variables.
The most common example of this is changing the current working directory using chdir(). One thread calls chdir(), and the working directory of all the threads changes.
Even more drastic example of a process-scope change is chroot(): the root directory of all the threads changes, and no thread can undo it (as opposed to chdir()).
Further examples of process-scope changes include umask() and changing uids/gids.
Thinking of mixing fork() and threads? Please lie down and wait until the feeling passes. Be aware that the semantics of fork() vary between platforms. For example, some UNIX systems copy all the current threads into the child process, while others only copy the thread that called fork(). You have been warned!
Similarly, mixing signals and threads should not be attempted. Implementations are platform-dependent, and even the POSIX semantics may not be what you expect (and Perl doesn't even give you the full POSIX API).
If the system Perl is compiled in has thread-safe variants of such calls, they will be used. Beyond that, Perl is at the mercy of the thread-safety or -unsafety of the calls. Please consult your C library call documentation.
On some platforms the thread-safe library interfaces may fail if the result buffer is too small (for example the user group databases may be rather large, and the reentrant interfaces may have to carry around a full snapshot of those databases). Perl will start with a small buffer, but keep retrying and growing the result buffer until the result fits. If this limitless growing sounds bad for security or memory consumption reasons you can recompile Perl with PERL_REENTRANT_MAXSIZE defined to the maximum number of bytes you will allow.
Robbins, Kay. A., and Steven Robbins. Practical Unix Programming: A Guide to Concurrency, Communication, and Multithreading. Prentice-Hall, 1996.
Lewis, Bill, and Daniel J. Berg. Multithreaded Programming with Pthreads. Prentice Hall, 1997, ISBN 0-13-443698-9 (a well-written introduction to threads).
Nelson, Greg (editor). Systems Programming with Modula-3. Prentice Hall, 1991, ISBN 0-13-590464-1.
Nichols, Bradford, Dick Buttlar, and Jacqueline Proulx Farrell. Pthreads Programming. O'Reilly & Associates, 1996, ISBN 156592-115-1 (covers POSIX threads).
Tanenbaum, Andrew S. Distributed Operating Systems. Prentice Hall, 1995, ISBN 0-13-219908-4 (great textbook).
Silberschatz, Abraham, and Peter B. Galvin. Operating System Concepts, 4th ed. Addison-Wesley, 1995, ISBN 0-201-59292-4
comp.programming.threads FAQ, <http://www.serpentine.com/~bos/threads-faq/>
Le Sergent, T. and B. Berthomieu. ``Incremental MultiThreaded Garbage Collection on Virtually Shared Memory Architectures'' in Memory Management: Proc. of the International Workshop IWMM 92, St. Malo, France, September 1992, Yves Bekkers and Jacques Cohen, eds. Springer, 1992, ISBN 3540-55940-X (real-life thread applications).
Artur Bergman, ``Where Wizards Fear To Tread'', June 11, 2002, <http://www.perl.com/pub/a/2002/06/11/threads.html>
Slightly modified by Arthur Bergman to fit the new thread model/module.
Reworked slightly by Jц╤rg Walter <jwalt@cpan.org<gt> to be more concise about thread-safety of perl code.
Rearranged slightly by Elizabeth Mattijsen <liz@dijkmat.nl<gt> to put less emphasis on yield().
For more information please see threads and threads::shared.
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |