[ новости /+++ | форум | теги | ]

NAME

bc - An arbitrary precision calculator language
 

SYNTAX

VERSION

DESCRIPTION

This version of bc contains several extensions beyond traditional bc implementations and the POSIX draft standard. Command line options can cause these extensions to print a warning or to be rejected. This document describes the language accepted by this processor. Extensions will be identified as such.  

OPTIONS

-h, --help

Print the usage and exit.

-i, --interactive

Force interactive mode.

-l, --mathlib

Define the standard math library.

-w, --warn

Give warnings for extensions to POSIX bc.

-s, --standard

Process exactly the POSIX bc language.

-q, --quiet

Do not print the normal GNU bc welcome.

-v, --version

Print the version number and copyright and quit.

NUMBERS

 .000001 has a length of 6 and scale of 6.
 1935.000 has a length of 7 and a scale of 3.

VARIABLES

There are four special variables, scale, ibase, obase, and last. scale defines how some operations use digits after the decimal point. The default value of scale is 0. ibase and obase define the conversion base for input and output numbers. The default for both input and output is base 10. last (an extension) is a variable that has the value of the last printed number. These will be discussed in further detail where appropriate. All of these variables may have values assigned to them as well as used in expressions.  

COMMENTS

To support the use of scripts for bc, a single line comment has been added as an extension. A single line comment starts at a # character and continues to the next end of the line. The end of line character is not part of the comment and is processed normally.  

EXPRESSIONS

A simple expression is just a constant. bc converts constants into internal decimal numbers using the current input base, specified by the variable ibase. (There is an exception in functions.) The legal values of ibase are 2 through 16. Assigning a value outside this range to ibase will result in a value of 2 or 16. Input numbers may contain the characters 0-9 and A-F. (Note: They must be capitals. Lower case letters are variable names.) Single digit numbers always have the value of the digit regardless of the value of ibase. (i.e. A = 10.) For multi-digit numbers, bc changes all input digits greater or equal to ibase to the value of ibase-1. This makes the number FFF always be the largest 3 digit number of the input base.

Full expressions are similar to many other high level languages. Since there is only one kind of number, there are no rules for mixing types. Instead, there are rules on the scale of expressions. Every expression has a scale. This is derived from the scale of original numbers, the operation performed and in many cases, the value of the variable scale. Legal values of the variable scale are 0 to the maximum number representable by a C integer.

In the following descriptions of legal expressions, "expr" refers to a complete expression and "var" refers to a simple or an array variable. A simple variable is just a

name

name[expr]

- expr

The result is the negation of the expression.

++ var

The variable is incremented by one and the new value is the result of the expression.

-- var

The variable is decremented by one and the new value is the result of the expression.

var ++

 The result of the expression is the value of the variable and then the variable is incremented by one.

var --

The result of the expression is the value of the variable and then the variable is decremented by one.

expr + expr

The result of the expression is the sum of the two expressions.

expr - expr

The result of the expression is the difference of the two expressions.

expr * expr

The result of the expression is the product of the two expressions.

expr / expr

The result of the expression is the quotient of the two expressions. The scale of the result is the value of the variable scale.

expr % expr

The result of the expression is the "remainder" and it is computed in the following way. To compute a%b, first a/b is computed to scale digits. That result is used to compute a-(a/b)*b to the scale of the maximum of scale+scale(b) and scale(a). If scale is set to zero and both expressions are integers this expression is the integer remainder function.

expr ^ expr

The result of the expression is the value of the first raised to the second. The second expression must be an integer. (If the second expression is not an integer, a warning is generated and the expression is truncated to get an integer value.) The scale of the result is scale if the exponent is negative. If the exponent is positive the scale of the result is the minimum of the scale of the first expression times the value of the exponent and the maximum of scale and the scale of the first expression. (e.g. scale(a^b) = min(scale(a)*b, max( scale, scale(a))).) It should be noted that expr^0 will always return the value of 1.

( expr )

This alters the standard precedence to force the evaluation of the expression.

var = expr

The variable is assigned the value of the expression.

var <op>= expr

This is equivalent to "var = var <op> expr" with the exception that the "var" part is evaluated only once. This can make a difference if "var" is an array.

 Relational expressions are a special kind of expression that always evaluate to 0 or 1, 0 if the relation is false and 1 if the relation is true. These may appear in any legal expression. (POSIX bc requires that relational expressions are used only in if, while, and for statements and that only one relational test may be done in them.) The relational operators are

expr1 < expr2

The result is 1 if expr1 is strictly less than expr2.

expr1 <= expr2

The result is 1 if expr1 is less than or equal to expr2.

expr1 > expr2

The result is 1 if expr1 is strictly greater than expr2.

expr1 >= expr2

The result is 1 if expr1 is greater than or equal to expr2.

expr1 == expr2

The result is 1 if expr1 is equal to expr2.

expr1 != expr2

The result is 1 if expr1 is not equal to expr2.

Boolean operations are also legal. (POSIX bc does NOT have boolean operations). The result of all boolean operations are 0 and 1 (for false and true) as in relational expressions. The boolean operators are:

!expr

The result is 1 if expr is 0.

expr && expr

The result is 1 if both expressions are non-zero.

expr || expr

The result is 1 if either expression is non-zero.

The expression precedence is as follows: (lowest to highest)

|| operator, left associative
&& operator, left associative
! operator, nonassociative
Relational operators, left associative
Assignment operator, right associative
+ and - operators, left associative
*, / and % operators, left associative
^ operator, right associative
unary - operator, nonassociative
++ and -- operators, nonassociative

This precedence was chosen so that POSIX compliant bc programs will run correctly. This will cause the use of the relational and logical operators to have some unusual behavior when used with assignment expressions. Consider the expression:

a = 3 < 5

Most C programmers would assume this would assign the result of "3 < 5" (the value 1) to the variable "a". What this does in bc is assign the value 3 to the variable "a" and then compare 3 to 5. It is best to use parenthesis when using relational and logical operators with the assignment operators.

There are a few more special expressions that are provided in bc. These have to do with user defined functions and standard functions. They all appear as "name(parameters)". See the section on functions for user defined functions. The standard functions are:

length ( expression )

The value of the length function is the number of significant digits in the expression.

read ( )

The read function (an extension) will read a number from the standard input, regardless of where the function occurs. Beware, this can cause problems with the mixing of data and program in the standard input. The best use for this function is in a previously written program that needs input from the user, but never allows program code to be input from the user. The value of the read function is the number read from the standard input using the current value of the variable ibase for the conversion base.

scale ( expression )

The value of the scale function is the number of digits after the decimal point in the expression.

sqrt ( expression )

The value of the sqrt function is the square root of the expression. If the expression is negative, a run time error is generated.

STATEMENTS

expression

This statement does one of two things. If the expression starts with "<variable> <assignment> ...", it is considered to be an assignment statement. If the expression is not an assignment statement, the expression is evaluated and printed to the output. After the number is printed, a newline is printed. For example, "a=1" is an assignment statement and "(a=1)" is an expression that has an embedded assignment. All numbers that are printed are printed in the base specified by the variable obase. The legal values for obase are 2 through BC_BASE_MAX. (See the section LIMITS.) For bases 2 through 16, the usual method of writing numbers is used. For bases greater than 16, bc uses a multi-character digit method of printing the numbers where each higher base digit is printed as a base 10 number. The multi-character digits are separated by spaces. Each digit contains the number of characters required to represent the base ten value of "obase-1". Since numbers are of arbitrary precision, some numbers may not be printable on a single output line. These long numbers will be split across lines using the "\" as the last character on a line. The maximum number of characters printed per line is 70. Due to the interactive nature of bc, printing a number causes the side effect of assigning the printed value to the special variable last. This allows the user to recover the last value printed without having to retype the expression that printed the number. Assigning to last is legal and will overwrite the last printed value with the assigned value. The newly assigned value will remain until the next number is printed or another value is assigned to last. (Some installations may allow the use of a single period (.) which is not part of a number as a short hand notation for for last.)

string

The string is printed to the output. Strings start with a double quote character and contain all characters until the next double quote character. All characters are take literally, including any newline. No newline character is printed after the string.

print list

The print statement (an extension) provides another method of output. The "list" is a list of strings and expressions separated by commas. Each string or expression is printed in the order of the list. No terminating newline is printed. Expressions are evaluated and their value is printed and assigned to the variable last. Strings in the print statement are printed to the output and may contain special characters. Special characters start with the backslash character (\). The special characters recognized by bc are "a" (alert or bell), "b" (backspace), "f" (form feed), "n" (newline), "r" (carriage return), "q" (double quote), "t" (tab), and "\" (backslash). Any other character following the backslash will be ignored.

{ statement_list }

This is the compound statement. It allows multiple statements to be grouped together for execution.

if ( expression ) statement1 [else statement2]

The if statement evaluates the expression and executes statement1 or statement2 depending on the value of the expression. If the expression is non-zero, statement1 is executed. If statement2 is present and the value of the expression is 0, then statement2 is executed. (The else clause is an extension.)

while ( expression ) statement

The while statement will execute the statement while the expression is non-zero. It evaluates the expression before each execution of the statement. Termination of the loop is caused by a zero expression value or the execution of a break statement.

for ( [expression1] ; [expression2] ; [expression3] ) statement

The for statement controls repeated execution of the statement. Expression1 is evaluated before the loop. Expression2 is evaluated before each execution of the statement. If it is non-zero, the statement is evaluated. If it is zero, the loop is terminated. After each execution of the statement, expression3 is evaluated before the reevaluation of expression2. If expression1 or expression3 are missing, nothing is evaluated at the point they would be evaluated. If expression2 is missing, it is the same as substituting the value 1 for expression2. (The optional expressions are an extension. POSIX bc requires all three expressions.) The following is equivalent code for the for statement:

expression1;
while (expression2) {
   statement;
   expression3;
}

break

This statement causes a forced exit of the most recent enclosing while statement or for statement.

continue

The continue statement (an extension) causes the most recent enclosing for statement to start the next iteration.

halt

The halt statement (an extension) is an executed statement that causes the bc processor to quit only when it is executed. For example, "if (0 == 1) halt" will not cause bc to terminate because the halt is not executed.

return

Return the value 0 from a function. (See the section on functions.)

return ( expression )

Return the value of the expression from a function. (See the section on functions.) As an extension, the parenthesis are not required.

PSEUDO STATEMENTS

limits

Print the local limits enforced by the local version of bc. This is an extension.

quit

When the quit statement is read, the bc processor is terminated, regardless of where the quit statement is found. For example, "if (0 == 1) quit" will cause bc to terminate.

warranty

Print a longer warranty notice. This is an extension.

FUNCTIONS

define name ( parameters ) { newline
    auto_list   statement_list }

Parameters are numbers or arrays (an extension). In the function definition, zero or more parameters are defined by listing their names separated by commas. Numbers are only call by value parameters. Arrays are only call by variable. Arrays are specified in the parameter definition by the notation "name[]". In the function call, actual parameters are full expressions for number parameters. The same notation is used for passing arrays as for defining array parameters. The named array is passed by variable to the function. Since function definitions are dynamic, parameter numbers and types are checked when a function is called. Any mismatch in number or types of parameters will cause a runtime error. A runtime error will also occur for the call to an undefined function.

The auto_list is an optional list of variables that are for "local" use. The syntax of the auto list (if present) is "auto name, ... ;". (The semicolon is optional.) Each name is the name of an auto variable. Arrays may be specified by using the same notation as used in parameters. These variables have their values pushed onto a stack at the start of the function. The variables are then initialized to zero and used throughout the execution of the function. At function exit, these variables are popped so that the original value (at the time of the function call) of these variables are restored. The parameters are really auto variables that are initialized to a value provided in the function call. Auto variables are different than traditional local variables because if function A calls function B, B may access function A's auto variables by just using the same name, unless function B has called them auto variables. Due to the fact that auto variables and parameters are pushed onto a stack, bc supports recursive functions.

The function body is a list of bc statements. Again, statements are separated by semicolons or newlines. Return statements cause the termination of a function and the return of a value. There are two versions of the return statement. The first form, "return", returns the value 0 to the calling expression. The second form, "return ( expression )", computes the value of the expression and returns that value to the calling expression. There is an implied "return (0)" at the end of every function. This allows a function to terminate and return 0 without an explicit return statement.

Functions also change the usage of the variable ibase. All constants in the function body will be converted using the value of ibase at the time of the function call. Changes of ibase will be ignored during the execution of the function except for the standard function read, which will always use the current value of ibase for conversion of numbers.

As an extension, the format of the definition has been slightly relaxed. The standard requires the opening brace be on the same line as the define keyword and all other parts must be on following lines. This version of bc will allow any number of newlines before and after the opening brace of the function. For example, the following definitions are legal.

define d (n) { return (2*n); }
define d (n)
  { return (2*n); }

MATH LIBRARY

s (x)

The sine of x, x is in radians.

c (x)

The cosine of x, x is in radians.

a (x)

The arctangent of x, arctangent returns radians.

l (x)

The natural logarithm of x.

e (x)

The exponential function of raising e to the value x.

j (n,x)

The bessel function of integer order n of x.

EXAMPLES

pi=$(echo "scale=10; 4*a(1)" | bc -l)

The following is the definition of the exponential function used in the math library. This function is written in POSIX bc.

scale = 20

/* Uses the fact that e^x = (e^(x/2))^2
   When x is small enough, we use the series:
     e^x = 1 + x + x^2/2! + x^3/3! + ...
*/

define e(x) {
  auto  a, d, e, f, i, m, v, z

  /* Check the sign of x. */
  if (x<0) {
    m = 1
    x = -x
  } 

  /* Precondition x. */
  z = scale;
  scale = 4 + z + .44*x;
  while (x > 1) {
    f += 1;
    x /= 2;
  }

  /* Initialize the variables. */
  v = 1+x
  a = x
  d = 1

  for (i=2; 1; i++) {
    e = (a *= x) / (d *= i)
    if (e == 0) {
      if (f>0) while (f--)  v = v*v;
      scale = z
      if (m) return (1/v);
      return (v/1);
    }
    v += e
  }
}

The following is code that uses the extended features of bc to implement a simple program for calculating checkbook balances. This program is best kept in a file so that it can be used many times without having to retype it at every use.

scale=2
print "\nCheck book program!\n"
print "  Remember, deposits are negative transactions.\n"
print "  Exit by a 0 transaction.\n\n"

print "Initial balance? "; bal = read()
bal /= 1
print "\n"
while (1) {
  "current balance = "; bal
  "transaction? "; trans = read()
  if (trans == 0) break;
  bal -= trans
  bal /= 1
}
quit

The following is the definition of the recursive factorial function.

define f (x) {
  if (x <= 1) return (1);
  return (f(x-1) * x);
}

READLINE AND LIBEDIT OPTIONS

DIFFERENCES

A major source of differences is extensions, where a feature is extended to add more functionality and additions, where new features are added. The following is the list of differences and extensions.

LANG environment

This version does not conform to the POSIX standard in the processing of the LANG environment variable and all environment variables starting with LC_.

names

Traditional and POSIX bc have single letter names for functions, variables and arrays. They have been extended to be multi-character names that start with a letter and may contain letters, numbers and the underscore character.

Strings

Strings are not allowed to contain NUL characters. POSIX says all characters must be included in strings.

last

POSIX bc does not have a last variable. Some implementations of bc use the period (.) in a similar way.

comparisons

POSIX bc allows comparisons only in the if statement, the while statement, and the second expression of the for statement. Also, only one relational operation is allowed in each of those statements.

if statement, else clause

POSIX bc does not have an else clause.

for statement

POSIX bc requires all expressions to be present in the for statement.

&&, ||, !

POSIX bc does not have the logical operators.

read function

POSIX bc does not have a read function.

print statement

POSIX bc does not have a print statement .

continue statement

POSIX bc does not have a continue statement.

return statement

POSIX bc requires parentheses around the return expression.

array parameters

POSIX bc does not (currently) support array parameters in full. The POSIX grammar allows for arrays in function definitions, but does not provide a method to specify an array as an actual parameter. (This is most likely an oversight in the grammar.) Traditional implementations of bc have only call by value array parameters.

function format

POSIX bc requires the opening brace on the same line as the define key word and the auto statement on the next line.

=+, =-, =*, =/, =%, =^

POSIX bc does not require these "old style" assignment operators to be defined. This version may allow these "old style" assignments. Use the limits statement to see if the installed version supports them. If it does support the "old style" assignment operators, the statement "a =- 1" will decrement a by 1 instead of setting a to the value -1.

spaces in numbers

Other implementations of bc allow spaces in numbers. For example, "x=1 3" would assign the value 13 to the variable x. The same statement would cause a syntax error in this version of bc.

errors and execution

This implementation varies from other implementations in terms of what code will be executed when syntax and other errors are found in the program. If a syntax error is found in a function definition, error recovery tries to find the beginning of a statement and continue to parse the function. Once a syntax error is found in the function, the function will not be callable and becomes undefined. Syntax errors in the interactive execution code will invalidate the current execution block. The execution block is terminated by an end of line that appears after a complete sequence of statements. For example,

a = 1
b = 2

has two execution blocks and

{ a = 1
  b = 2 }

has one execution block. Any runtime error will terminate the execution of the current execution block. A runtime warning will not terminate the current execution block.

Interrupts

During an interactive session, the SIGINT signal (usually generated by the control-C character from the terminal) will cause execution of the current execution block to be interrupted. It will display a "runtime" error indicating which function was interrupted. After all runtime structures have been cleaned up, a message will be printed to notify the user that bc is ready for more input. All previously defined functions remain defined and the value of all non-auto variables are the value at the point of interruption. All auto variables and function parameters are removed during the clean up process. During a non-interactive session, the SIGINT signal will terminate the entire run of bc.

LIMITS

BC_BASE_MAX

The maximum output base is currently set at 999. The maximum input base is 16.

BC_DIM_MAX

This is currently an arbitrary limit of 65535 as distributed. Your installation may be different.

BC_SCALE_MAX

The number of digits after the decimal point is limited to INT_MAX digits. Also, the number of digits before the decimal point is limited to INT_MAX digits.

BC_STRING_MAX

The limit on the number of characters in a string is INT_MAX characters.

exponent

The value of the exponent in the raise operation (^) is limited to LONG_MAX.

variable names

The current limit on the number of unique names is 32767 for each of simple variables, arrays and functions.

ENVIRONMENT

POSIXLY_CORRECT

This is the same as the -s option.

BC_ENV_ARGS

This is another mechanism to get arguments to bc. The format is the same as the command line arguments. These arguments are processed first, so any files listed in the environment arguments are processed before any command line argument files. This allows the user to set up "standard" options and files to be processed at every invocation of bc. The files in the environment variables would typically contain function definitions for functions the user wants defined every time bc is run.

BC_LINE_LENGTH

This should be an integer specifying the number of characters in an output line for numbers. This includes the backslash and newline characters for long numbers.

DIAGNOSTICS

BUGS

Email bug reports to bug-bc@gnu.org. Be sure to include the word ``bc'' somewhere in the ``Subject:'' field.  

AUTHOR

Philip A. Nelson
philnelson@acm.org

ACKNOWLEDGEMENTS

Index

NAME

SYNTAX

VERSION

DESCRIPTION

OPTIONS

NUMBERS

VARIABLES

COMMENTS

EXPRESSIONS

STATEMENTS

PSEUDO STATEMENTS

FUNCTIONS

MATH LIBRARY

EXAMPLES

READLINE AND LIBEDIT OPTIONS

DIFFERENCES

LIMITS

ENVIRONMENT

DIAGNOSTICS

BUGS

AUTHOR

ACKNOWLEDGEMENTS

Партнёры:

Хостинг: