Партнёры:
Хостинг:
Errors encountered by the ACP Modem device driver or application are logged using the syslog utility.
The ACP device driver supports a debug argument to enable the generation of trace information. The command for this debug is listed below. You can also access several of the variables listed below in the mwaved script.
insmod mwave mwave_debug=0x0f |
Where the following debug trace information is selectable:
0x01 ACP Modem Device driver entry points 0x02 Systems Management API(SMAPI) 0x04 Hardware Interface (3780I) 0x08 Thinkpad Interface (tp3780i) |
Trace information is logged using the syslog utility.
The ACP application supports tracing through the use of flags configured in the [STARTUP] section of the mwavem.conf file.
Mwave Manager API trace points:
MANAGER_API_TRACE=1 MANAGER_API_DATA_TRACE=1 MANAGER_CORE_TRACE=1 MANAGER_SPECIFIC_TRACE=1 |
MEIO Manager trace points:
MEIO_API_TRACE=1 MEIO_CORE_TRACE=1 MEIO_SPECIFIC_TRACE=1 |
Mwave Modem application trace points:
MWMLW32_TRACE=1 MWMPW32_TRACE=1 MWMUTIL_TRACE=1 MWWTT32_TRACE=1 |
Trace information is logged using the syslog utility.
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |