Партнёры:
Хостинг:
Before you proceed with installing the server-software, it would be beneficial to review the following HOWTO's (in the listed order):
Particularly, the Diskless-HOWTO contains a wealth of information useful for this project.
The required software are mostly already installed on a stock Linux distribution, but some might be missing. The ones that are usually not found (dhcpd, pxe, etc) are included in the mpeg-box-project.tgz file.
I presume you have read the NFS-HOWTO . If you haven't, do yourself a favor and pick it up. Most of these information are straight from that HOWTO.
Before you start setting NFS, make sure you have nfs-utils or nfs-server package installed. If you don't have them, the dhcpd-2.0pl2 source code is included in the mpeg-box-project.tgz file.
tar -zxvf mpeg-box-project.tgz
cd "1st Step - configuring server/01 - dhcp"
./configure make make install
Setting up the server will be done in two steps: Setting up the configuration files for NFS, and then starting the NFS services.
There are three main configuration files you will need to edit to set up an NFS server: /etc/exports, /etc/hosts.allow, and /etc/hosts.deny. Strictly speaking, you only need to edit /etc/exports to get NFS to work, but you would be left with an extremely insecure setup. You may also need to edit your startup scripts.
This file contains a list of entries; each entry indicates a volume that is shared and how it is shared. Check the man pages (man exports) for a complete description of all the setup options for the file, although the description here will probably satisfy most people's needs.
An entry in /etc/exports will typically look like this:
directory machine1(option11,option12) machine2(option21,option22)
where
the directory that you want to share. It may be an entire volume though it need not be. If you share a directory, then all directories under it within the same file system will be shared as well. For example it might be: /exports
client machines that will have access to the directory. The machines may be listed by their IP address or their DNS address (e.g., machine.company.com or 192.168.0.8). Using IP addresses is more reliable and more secure.
the option listing for each machine will describe what kind of access that machine will have. Important options are:
For our MP3-box, we just need to read-only access to the directory with mp3's. Suppose the MP3-box IP will be 10.0.0.8 and the directory with our music files is /exports/media. The /etc/exports would look like this:
/exports/media 10.0.0.8(ro)
These two files specify which computers on the network can use services on your machine. Each line of the file is an entry listing a service and a set of machines. When the server gets a request from a machine, it does the following:
In general, it is a good idea with NFS (as with most internet services) to explicitly deny access to hosts that you don't need to allow access to.
The first step in doing this is to add the following entry to /etc/hosts.deny:
portmap:ALL
Next, we need to add an entry to hosts.allow to give any hosts access that we want to have access. (If we just leave the above lines in hosts.deny then nobody will have access to NFS.) Entries in hosts.allow follow the format:
service: host [or network/netmask] , host [or network/netmask]
Suppose we have the setup above and we just want to allow access to huh.com and arakis.dune.com, and suppose that the IP addresses of these machines are 10.0.0.8 and.10.0.0.1, respectively. We could add the following entry to /etc/hosts.allow:
portmap: 10.0.0.8, 10.0.0.1
lockd: 10.0.0.8, 10.0.0.1
rquotad: 10.0.0.8, 10.0.0.1
mountd: 10.0.0.8, 10.0.0.1
statd: 10.0.0.8, 10.0.0.1
The shell scripts which start the NFS server are usually in /etc/init.d or /etc/rc.d. Depending on your Linux distribution, you either need to run: netconfig, setup (RedHat) ; YaSt2(SuSe); turbo-config (TurboLinux); or you are stuck editing /etc/init.d/nfs-server files manually. If you run those programs, look for options that list NFS or nfs-serveR and start those services.
DHCP (Dynamic Host Configuration Protocol) is a protocol for computers to find out their IP address, gateway settings, netmask, and a lot more. Its a quite nice off-load for the system administrator. The reason why you want to use it is because when the MP3-box comes up, as said before, it doesn't have a harddrive, nor floppy drive - therefore it can't boot an operating system. But with a card that supports PXE, the following happens:
Setting up the DHCP daemon is a two stage process - installing the binaries, and setting up the configuration file for DHCP.
The version of DHCP I'm using comes from Internet Software Consortium, the version is 2.0. You might already have the binaries installed, if that's the case - skip this section.
The source code is 1st Step - configuring server/01 - dhcpd/dhcp-2.0pl2, go into that directory and issue the following commands:
./configure make make install
The shell scripts which start the DHCP server are usually in /etc/init.d or /etc/rc.d. Depending on your Linux distribution, you either need to run: netconfig, setup (RedHat) ; YaSt2(SuSe); turbo-config (TurboLinux); or you are stuck editing /etc/init.d/dhcpd files manually.
The most important part of the /etc/dhcpd.conf file are the option fields and the host field. For the v2.0 of ISC-dhcpd its necessary to specify
option dhcp-class-identifier "PXEClient";
option vendor-encapsulated-options ff;
host swallow {
hardware ethernet 00:90:27:c1:dc:db;
fixed-address swallow.eoh;
}
This is allow the DHCP server to give the box with that MAC address (which the network card displays during boot-up), the IP address associated with the host swallow. How is the host associated with 10.0.0.8 - that's the job of DNS server (which you hopefully have installed). If you don't have DNS, you can use flat-host resolution and add into /etc/hosts the following line (replace the 00:90:27. .. with your MAC address):
10.0.0.8 swallow.eoh swallow
Back to the program ...
Following is my /etc/dhcpd.conf file:
option domain-name "eoh";
option dhcp-class-identifier "PXEClient";
option vendor-encapsulated-options ff;
option subnet-mask 255.255.255.0;
default-lease-time 600;
max-lease-time 7200;
subnet 10.0.0.0 netmask 255.255.255.0 {
range 10.0.0.20 10.0.0.40;
}
host swallow {
hardware ethernet 00:90:27:c1:dc:db;
fixed-address swallow.eoh;
}
You can check your DHCP server by booting up a Windows workstation, and change its IP address to Obtain an IP address automatically.
PXE is standard for remote booting. The following information is taken from 1st Step - configuring server/02 - pxe/pxe-README:
PXE is an extension to DHCP and also method of remotely booting. The specs for PXE can be found at ftp://download.intel.com/ial/wfm/pxespec.pdf. The PXE daemon provides two capabilities: proxyDHCP and PXE Bootserver. The PXE daemon can be set up to provide either or obth of the capabilities. Both capabilities are required.
proxyDHCP works in parallel with DHCP and provides the booting client with a remote boot configuration options. ProxyDHCP provides the PXE client(s) with the following information: remote boot prompt with optional timeout, remote boot menu and PXE Bootserver discovery options.
The PXE Bootserver is a capability provided by the PXE daemon. The PXE Bootserver is the capability that provides the booting client with boot images for a particular boot environment.
PXE Bootserver serves up requested NBPs (Network Boot Programs) to PXE clients. PXE Clients locate PXE Bootservers using discovery information provided to the client by proxyDHCP. The discovery method used by the PXE client (multicast, broadcast or unicast) and the list of available bootserver types is controlled by proxyDHCP. PXE Bootservers always listen for all three types of discovery requests and will respond to all valid requests.
If you have RedHat or SuSE, pxe is available as an RPM - download it and install it. Unfortunately, you are still going to need the sources - you will have to recompile the NBP (Network Boot Program).
All the paths mentioned below refer to the contents of the mpeg-box-project.tgz file, which has all the source files and configuration files listed below.
The source file for PXE server are located in
1st Step - configuring server/02 - pxe/pxe/pxe-linux/server.
If you don't have PXE installed, just run: make and make install. The files will be installed in /usr/local. After that you should copy the 1st Step - configuring server/02 - pxe/pxe/pxe.init file to /etc/rc.d or /etc/init.d. After that go into your /etc/rc2.d and link /etc/init.d/pxe.init file to S99pxe. The command is:
ln -s ../init.d/pxe.init S99pxeIf you have no clue what I'm talking about, just enter
pxethat will start the PXE daemon (but do that after you have read the next section)
To get the PXE daemon completely working, its necessary to setup a couple of configuration files/directories.
mtftp dgram udp wait root /usr/sbin/tcpd in.mtftpd /tftpboot
tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd
mtftp 1759/udp
pxe 67/udp
pxe 4011/udp
mkdir -p /tftpboot/X86PC/UNDI/BStrap
mkdir -p /tftpboot/X86PC/UNDI/linux-install
After all these steps, make sure you have a DHCP daemon running and working (look in the section about DHCP to find out how). Start the pxe daemon by typing
pxeThe debug information for PXE is piped into /PxeServiceLog.txt. To turn this debug-feature off, edit the /etc/pxe.conf - search for DebugOutToFile.
Turn on your system with a network card that supports PXE. You should see the card getting an IP from the DHCP server, and then showing up a menu. If that's the case, you have successfully configured the server system, and its time to get configure the Linux kernel and initrd file for the MP3-box in the next section.
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |