ftape
floppy tape driver under Linux. It focusses on the newest version
which is ftape-4.02
at the time of this writing. This HOWTO is to
be intended as first step help and source of information.
The ftape
driver interfaces to QIC-40, QIC-80, QIC-3010 and
QIC-3020 compatible drives, and to the Iomega Ditto 2GB and Ditto Max
drives. The QIC-3010 and QIC-3020 standards are also known as
`Travan' (TR-2 and TR-3). These drives connect via the floppy disk
controller (FDC) which may be either an internal FDC or inside of
certain parallel port floppy tape drives. Please refer to the section
Supported drives for further
information.
ftape
does not cover SCSI or QIC-02 tape drives. DAT tape
drives usually (always?) connect to a SCSI controller.
This is but one of the Linux HOWTO documents. You can get an index of
the HOWTOs from
the Linux HOWTO index, while the real HOWTO's can be fetched (using
ftp
) from sunsite.unc.edu:pub/Linux/doc/HOWTO
(this is
the ``official'' place) or via the World Wide Web from
the Linux Documentation Project home page.
ftape
ftape
ftape-2.x
, ftape-3.x
and ftape-4.x
versions
ftape
driver
ftape
and floppies
ftape
ftape
ftape
ftape
driverftape
crashes on me when I do `...' - is that a bug?
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |