Вот что было до патча:

drmsub0: <Intel i915GM> port 0x1800-0x1807 mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0000000-0xb003ffff irq 10 at device 2.0 on pci0
error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize AGP.
device_attach: drmsub0 attach returned 12
pci0: <display> at device 2.1 (no driver attached)

это после:

agp0: <Intel 82915GM (915GM GMCH) SVGA controller> port 0x1800-0x1807 mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0000000-0xb003ffff irq 10 at device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
drmsub0: <Intel i915GM>: (child of agp_i810.c) on agp0
info: [drm] AGP at 0xb0080000 0MB
info: [drm] Initialized i915 1.2.0 20041217
pci0: <display> at device 2.1 (no driver attached)

Это мой конфиг xorg.conf :
Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    RgbPath      "/usr/X11R6/lib/X11/rgb"
    ModulePath   "/usr/X11R6/lib/modules"
    FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
    FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
    Load  "dbe"
    Load  "dri"
    Load  "extmod"
    Load  "glx"
    Load  "record"
    Load  "xtrap"
    Load  "freetype"
    Load  "type1"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
    Option        "XkbModel" "pc104"
    Option        "XkbLayout" "us"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "Auto"
    Option        "Device" "/dev/sysmouse"
    Option        "ZAxisMapping" "4 5 6 7"
    Option        "Emulate3Buttons"
EndSection

Section "Monitor"

    #DisplaySize      300   220    # mm
    Identifier   "Monitor0"
    VendorName   "LPL"
    ModelName    "0"
### Comment all HorizSync and VertSync values to use DDC:
    HorizSync    31.5 - 57.0
    VertRefresh  50.0 - 70.0
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card0"
    Driver      "i810"
    VendorName  "Intel Corporation"
    BoardName   "Mobile 915GM/GMS/910GML Express Graphics Controller"
    BusID       "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
        Modes    "1024x768"
    EndSubSection
EndSection

А а при команде glxinfo всегда "direct rendering: No".
Что я не так делаю?