slackware 11.0, после перехода на ядро 2.6 не опознаются флешки, устройства sdx не создаются, модули все загружены, hotplug - исполняемый, etc логи: dmesg.log errupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: e8000000-e80fffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NTFS driver 2.1.27 [Flags: R/W]. JFS: nTxBlock = 6021, nTxLock = 48175 SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 2.6.10) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.0 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: VIA IRQ fixup for 0000:00:0f.0, from 255 to 11 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0 ide0: BM-DMA at 0xe200-0xe207, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe208-0xe20f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ST340014A, ATA DISK drive hdb: ST380011A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive hdd: LITE-ON DVDRW SHW-16H5S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 > hda3 hda4 hdb: max request size: 512KiB hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache ide-floppy driver 0.99.newide Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver (1.1-5[2409]-mh1) scsi: <fdomain> Detection failed (no card) sym53c416.c: Version 1.0.0-ac qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.1.6 Copyright(c) 2004-2006 Emulex. All rights reserved. Failed initialization of WD-7000 SCSI card! megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006) megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006 GDT-HA: Storage RAID Controller Driver. Version: 3.04 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.001. 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. nsp32: loading... ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006) libata version 1.20 loaded. st: Version 20050830, fixed bufsize 32768, s/g segs 256 I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.03.09 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.03.09 Fusion MPT FC Host driver 3.03.09 Fusion MPT SAS Host driver 3.03.09 ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0a.2 -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e8104000-e81047ff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance usbmon: debugfs is not available ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 irq 10: nobody cared (try booting with the "irqpoll" option) <c0133982> __report_bad_irq+0x22/0x90 <c0133a98> note_interrupt+0x78/0xc0 <c01334a9> __do_IRQ+0x99/0xb0 <c01048da> do_IRQ+0x1a/0x30 <c010305a> common_interrupt+0x1a/0x20 <c011d250> __do_softirq+0x30/0xb0 <c011d305> do_softirq+0x35/0x40 <c01048df> do_IRQ+0x1f/0x30 <c010305a> common_interrupt+0x1a/0x20 <c0133684> setup_irq+0x94/0x100 <c04dab50> usb_hcd_irq+0x0/0x60 <c0133844> request_irq+0x74/0xa0 <c04dae61> usb_add_hcd+0x181/0x350 <c04dab50> usb_hcd_irq+0x0/0x60 <c04e291c> usb_hcd_pci_probe+0x17c/0x350 <c02f2551> pci_call_probe+0x11/0x20 <c02f25aa> __pci_device_probe+0x4a/0x60 <c02f25df> pci_device_probe+0x1f/0x40 <c03477d3> driver_probe_device+0x53/0xa0 <c03478a0> __driver_attach+0x0/0x70 <c034790b> __driver_attach+0x6b/0x70 <c0346d78> bus_for_each_dev+0x58/0x80 <c02e603c> kobject_add+0x5c/0xd0 <c0347925> driver_attach+0x15/0x20 <c03478a0> __driver_attach+0x0/0x70 <c0347259> bus_add_driver+0x69/0xa0 <c0347d9a> driver_register+0x5a/0x90 <c04c1af9> nodemgr_create_drv_files+0x19/0x30 <c02f284e> __pci_register_driver+0x3e/0x60 <c0118e6f> printk+0xf/0x20 <c077a46a> ehci_hcd_pci_init+0x1a/0x30 <c07547d9> do_initcalls+0x79/0x120 <c0133e1d> register_irq_proc+0x6d/0x80 <c01002b0> init+0x0/0x1a0 <c01002dd> init+0x2d/0x1a0 <c0101355> kernel_thread_helper+0x5/0x10 handlers: [<c04dab50>] (usb_hcd_irq+0x0/0x60) Disabling IRQ #10 ehci_hcd 0000:00:10.4: irq 10, io mem 0xe8105000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e300 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 11, io base 0x0000e400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:10.2 -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: VIA IRQ fixup for 0000:00:10.2, from 5 to 10 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 10, io base 0x0000e500 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3 -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: VIA IRQ fixup for 0000:00:10.3, from 5 to 10 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 10, io base 0x0000e600 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c010107472c] sl811: driver sl811-hcd, 19 May 2005 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 3093.000 MB/sec raid5: using function: pIII_sse (3093.000 MB/sec) raid6: int32x1 748 MB/s raid6: int32x2 958 MB/s raid6: int32x4 567 MB/s raid6: int32x8 524 MB/s raid6: mmxx1 1511 MB/s raid6: mmxx2 2665 MB/s raid6: sse1x1 1420 MB/s raid6: sse1x2 2400 MB/s raid6: using algorithm sse1x2 (2400 MB/s) md: raid6 personality registered for level 6 md: multipath personality registered for level -4 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 LPT1 ACPI: (supports S0 S1 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ReiserFS: hda4: found reiserfs format "3.6" with standard journal input: AT Translated Set 2 keyboard as /class/input/input0 ReiserFS: hda4: using ordered data mode ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda4: checking transaction log (hda4) ReiserFS: hda4: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 284k freed Adding 747012k swap on /dev/hda3. Priority:-1 extents:1 across:747012k ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 Installing spdif_bug patch: Audigy 2 [SB0240] i2c_core: exports duplicate symbol i2c_register_driver (owned by kernel) ieee1394: exports duplicate symbol hpsb_alloc_host (owned by kernel) ohci1394: exports duplicate symbol ohci1394_stop_context (owned by kernel) gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xe100, speed 1242kHz PCI: Enabling device 0000:00:11.5 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:11.5 to 64 Linux agpgart interface v0.101 (c) Dave Jones USB Universal Host Controller Interface driver v3.0 kmem_cache_create: duplicate cache uhci_urb_priv <c014dd1f> kmem_cache_create+0x30f/0x3b0 <f0e05033> uhci_hcd_init+0x33/0x92 [uhci_hcd] <c0130e52> sys_init_module+0xe2/0x160 <c0102de7> syscall_call+0x7/0xb USB Universal Host Controller Interface driver v3.0 kmem_cache_create: duplicate cache uhci_urb_priv <c014dd1f> kmem_cache_create+0x30f/0x3b0 <f0e05033> uhci_hcd_init+0x33/0x92 [uhci_hcd] <c0130e52> sys_init_module+0xe2/0x160 <c0102de7> syscall_call+0x7/0xb USB Universal Host Controller Interface driver v3.0 kmem_cache_create: duplicate cache uhci_urb_priv <c014dd1f> kmem_cache_create+0x30f/0x3b0 <f0e05033> uhci_hcd_init+0x33/0x92 [uhci_hcd] <c0130e52> sys_init_module+0xe2/0x160 <c0102de7> syscall_call+0x7/0xb USB Universal Host Controller Interface driver v3.0 kmem_cache_create: duplicate cache uhci_urb_priv <c014dd1f> kmem_cache_create+0x30f/0x3b0 <f0e05033> uhci_hcd_init+0x33/0x92 [uhci_hcd] <c0130e52> sys_init_module+0xe2/0x160 <c0102de7> syscall_call+0x7/0xb agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: AGP aperture is 128M @ 0xe0000000 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 input: PC Speaker as /class/input/input1 input: ImPS/2 Generic Wheel Mouse as /class/input/input2 parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). lp0: console ready Capability LSM initialized ieee1394: exports duplicate symbol hpsb_alloc_host (owned by kernel) ohci1394: exports duplicate symbol ohci1394_stop_context (owned by kernel) USB Universal Host Controller Interface driver v3.0 kmem_cache_create: duplicate cache uhci_urb_priv <c014dd1f> kmem_cache_create+0x30f/0x3b0 <f0e05033> uhci_hcd_init+0x33/0x92 [uhci_hcd] <c0130e52> sys_init_module+0xe2/0x160 <c0102de7> syscall_call+0x7/0xb USB Universal Host Controller Interface driver v3.0 kmem_cache_create: duplicate cache uhci_urb_priv <c014dd1f> kmem_cache_create+0x30f/0x3b0 <f0e05033> uhci_hcd_init+0x33/0x92 [uhci_hcd] <c0130e52> sys_init_module+0xe2/0x160 <c0102de7> syscall_call+0x7/0xb USB Universal Host Controller Interface driver v3.0 kmem_cache_create: duplicate cache uhci_urb_priv <c014dd1f> kmem_cache_create+0x30f/0x3b0 <f0e05033> uhci_hcd_init+0x33/0x92 [uhci_hcd] <c0130e52> sys_init_module+0xe2/0x160 <c0102de7> syscall_call+0x7/0xb USB Universal Host Controller Interface driver v3.0 kmem_cache_create: duplicate cache uhci_urb_priv <c014dd1f> kmem_cache_create+0x30f/0x3b0 <f0e05033> uhci_hcd_init+0x33/0x92 [uhci_hcd] <c0130e52> sys_init_module+0xe2/0x160 <c0102de7> syscall_call+0x7/0xb NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver usb 1-8: new high speed USB device using ehci_hcd and address 2 ehci_hcd 0000:00:10.4: Unlink after no-IRQ? Controller is probably using the wrong IRQ. usb 1-8: device not accepting address 2, error -110 usb 1-8: new high speed USB device using ehci_hcd and address 3 usb 1-8: device not accepting address 3, error -110 usb 1-8: new high speed USB device using ehci_hcd and address 4 usb 1-8: device not accepting address 4, error -110 usb 1-8: new high speed USB device using ehci_hcd and address 5 usb 1-8: device not accepting address 5, error -110lsmod.log Module Size Used by snd_seq_dummy 2820 0 snd_seq_oss 28928 0 snd_seq_midi_event 5888 1 snd_seq_oss snd_seq 43984 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_pcm_oss 38048 0 snd_mixer_oss 15616 1 snd_pcm_oss ipv6 223584 10 sg 26524 0 capability 3336 0 commoncap 5376 1 capability lp 9800 0 parport_pc 24132 1 parport 30024 2 lp,parport_pc pcspkr 2432 0 psmouse 34952 0 shpchp 33816 0 evdev 8064 0 via_agp 7808 1 serio_raw 5252 0 agpgart 28080 1 via_agp snd_via82xx 22808 0 emu10k1_gp 2944 0 gameport 10760 3 snd_via82xx,emu10k1_gp i2c_viapro 7572 0 snd_mpu401_uart 6016 1 snd_via82xx snd_emu10k1 104356 0 snd_rawmidi 18720 2 snd_mpu401_uart,snd_emu10k1 snd_ac97_codec 86304 2 snd_via82xx,snd_emu10k1 snd_ac97_bus 2048 1 snd_ac97_codec snd_pcm 73736 4 snd_pcm_oss,snd_via82xx,snd_emu10k1,snd_ac97_codec snd_seq_device 6284 5 snd_seq_dummy,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi snd_timer 19332 3 snd_seq,snd_emu10k1,snd_pcm snd_page_alloc 7560 3 snd_via82xx,snd_emu10k1,snd_pcm snd_util_mem 3328 1 snd_emu10k1 snd_hwdep 6660 1 snd_emu10k1 snd 43364 13 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_mpu401_uart,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_hwdep soundcore 7136 1 snd lsusb.log Bus 5 Device 1: ID 0000:0000 Bus 2 Device 1: ID 0000:0000 Bus 5 Device 1: ID 0000:0000 Bus 3 Device 1: ID 0000:0000 Bus 1 Device 1: ID 0000:0000
|