Партнёры:
Хостинг:
perlfaq7 - Perl Language Issues ($Revision: 1.28 $, $Date: 1999/05/23 20:36:18 $)DESCRIPTION
This section deals with general Perl language issues that don't clearly fit into any of the other sections. Can I get a BNF/yacc/RE for the Perl language? There is no BNF, but you can paw your way through the yacc grammar in perly.y in the source distribution if you're particularly brave. The grammar relies on very smart tokenizing code, so be prepared to venture into toke.c as well. In the words of Chaim Frenkel: "Perl's grammar can not be reduced to BNF. The work of parsing perl is distributed between yacc, the lexer, smoke and mirrors." What are all these $@%&* punctuation signs, and how do I know when to use them? They are type specifiers, as detailed in the perldata manpage: $ for scalar values (number, string or reference) @ for arrays % for hashes (associative arrays) & for subroutines (aka functions, procedures, methods) * for all types of that symbol name. In version 4 you used them like pointers, but in modern perls you can just use references. A couple of others that you're likely to encounter that aren't really type specifiers are: <> are used for inputting a record from a filehandle. \ takes a reference to something. Note that <FILE> is neither the type specifier for files nor the name of the handle. It is the `<>' operator applied to the handle FILE. It reads one line (well, record - see the section on "$/" in the perlvar manpage) from the handle FILE in scalar context, or all lines in list context. When performing open, close, or any other operation besides `<>' on files, or even talking about the handle, do not use the brackets. These are correct: `eof(FH)', `seek(FH, 0, 2)' and "copying from STDIN to FILE". Do I always/never have to quote my strings or use semicolons and commas? Normally, a bareword doesn't need to be quoted, but in most cases probably should be (and must be under `use strict'). But a hash key consisting of a simple word (that isn't the name of a defined subroutine) and the left-hand operand to the `=>' operator both count as though they were quoted: This is like this ------------ --------------- $foo{line} $foo{"line"} bar => stuff "bar" => stuff The final semicolon in a block is optional, as is the final comma in a list. Good style (see the perlstyle manpage) says to put them in except for one-liners: if ($whoops) { exit 1 } @nums = (1, 2, 3); if ($whoops) { exit 1; } @lines = ( "There Beren came from mountains cold", "And lost he wandered under leaves", ); How do I skip some return values? One way is to treat the return values as a list and index into it: $dir = (getpwnam($user))[7]; Another way is to use undef as an element on the left-hand- side: ($dev, $ino, undef, undef, $uid, $gid) = stat($file); How do I temporarily block warnings? If you are running Perl 5.6.0 or better, the `use warnings' pragma allows fine control of what warning are produced. See the perllexwarn manpage for more details. { no warnings; # temporarily turn off warnings $a = $b + $c; # I know these might be undef } If you have an older version of Perl, the `$^W' variable (documented in the perlvar manpage) controls runtime warnings for a block: { local $^W = 0; # temporarily turn off warnings $a = $b + $c; # I know these might be undef } Note that like all the punctuation variables, you cannot currently use my() on `$^W', only local(). What's an extension? A way of calling compiled C code from Perl. Reading the perlxstut manpage is a good place to learn more about extensions. Why do Perl operators have different precedence than C operators? Actually, they don't. All C operators that Perl copies have the same precedence in Perl as they do in C. The problem is with operators that C doesn't have, especially functions that give a list context to everything on their right, eg print, chmod, exec, and so on. Such functions are called "list operators" and appear as such in the precedence table in the perlop manpage. A common mistake is to write: unlink $file || die "snafu"; This gets interpreted as: unlink ($file || die "snafu"); To avoid this problem, either put in extra parentheses or use the super low precedence `or' operator: (unlink $file) || die "snafu"; unlink $file or die "snafu"; The "English" operators (`and', `or', `xor', and `not') deliberately have precedence lower than that of list operators for just such situations as the one above. Another operator with surprising precedence is exponentiation. It binds more tightly even than unary minus, making `-2**2' product a negative not a positive four. It is also right-associating, meaning that `2**3**2' is two raised to the ninth power, not eight squared. Although it has the same precedence as in C, Perl's `?:' operator produces an lvalue. This assigns $x to either $a or $b, depending on the trueness of $maybe: ($maybe ? $a : $b) = $x; How do I declare/create a structure? In general, you don't "declare" a structure. Just use a (probably anonymous) hash reference. See the perlref manpage and the perldsc manpage for details. Here's an example: $person = {}; # new anonymous hash $person->{AGE} = 24; # set field AGE to 24 $person->{NAME} = "Nat"; # set field NAME to "Nat" If you're looking for something a bit more rigorous, try the perltoot manpage. How do I create a module? A module is a package that lives in a file of the same name. For example, the Hello::There module would live in Hello/There.pm. For details, read the perlmod manpage. You'll also find the Exporter manpage helpful. If you're writing a C or mixed-language module with both C and Perl, then you should study the perlxstut manpage. Here's a convenient template you might wish you use when starting your own module. Make sure to change the names appropriately. package Some::Module; # assumes Some/Module.pm use strict; use warnings; BEGIN { use Exporter (); our ($VERSION, @ISA, @EXPORT, @EXPORT_OK, %EXPORT_TAGS); ## set the version for version checking; uncomment to use ## $VERSION = 1.00; # if using RCS/CVS, this next line may be preferred, # but beware two-digit versions. $VERSION = do{my@r=q$Revision: 1.28 $=~/\d+/g;sprintf '%d.'.'%02d'x$#r,@r}; @ISA = qw(Exporter); @EXPORT = qw(&func1 &func2 &func3); %EXPORT_TAGS = ( ); # eg: TAG => [ qw!name1 name2! ], # your exported package globals go here, # as well as any optionally exported functions @EXPORT_OK = qw($Var1 %Hashit); } our @EXPORT_OK; # non-exported package globals go here our @more; our $stuff; # initialize package globals, first exported ones $Var1 = ''; %Hashit = (); # then the others (which are still accessible as $Some::Module::stuff) $stuff = ''; @more = (); # all file-scoped lexicals must be created before # the functions below that use them. # file-private lexicals go here my $priv_var = ''; my %secret_hash = (); # here's a file-private function as a closure, # callable as &$priv_func; it cannot be prototyped. my $priv_func = sub { # stuff goes here. }; # make all your functions, whether exported or not; # remember to put something interesting in the {} stubs sub func1 {} # no prototype sub func2() {} # proto'd void sub func3($$) {} # proto'd to 2 scalars # this one isn't exported, but could be called! sub func4(\%) {} # proto'd to 1 hash ref END { } # module clean-up code here (global destructor) 1; # modules must return true The h2xs program will create stubs for all the important stuff for you: % h2xs -XA -n My::Module How do I create a class? See the perltoot manpage for an introduction to classes and objects, as well as the perlobj manpage and the perlbot manpage. How can I tell if a variable is tainted? See the Laundering and Detecting Tainted Data entry in the perlsec manpage. Here's an example (which doesn't use any system calls, because the kill() is given no processes to signal): sub is_tainted { return ! eval { join('',@_), kill 0; 1; }; } This is not `-w' clean, however. There is no `-w' clean way to detect taintedness - take this as a hint that you should untaint all possibly-tainted data. What's a closure? Closures are documented in the perlref manpage. Closure is a computer science term with a precise but hard- to-explain meaning. Closures are implemented in Perl as anonymous subroutines with lasting references to lexical variables outside their own scopes. These lexicals magically refer to the variables that were around when the subroutine was defined (deep binding). Closures make sense in any programming language where you can have the return value of a function be itself a function, as you can in Perl. Note that some languages provide anonymous functions but are not capable of providing proper closures; the Python language, for example. For more information on closures, check out any textbook on functional programming. Scheme is a language that not only supports but encourages closures. Here's a classic function-generating function: sub add_function_generator { return sub { shift + shift }; } $add_sub = add_function_generator(); $sum = $add_sub->(4,5); # $sum is 9 now. The closure works as a function template with some customization slots left out to be filled later. The anonymous subroutine returned by add_function_generator() isn't technically a closure because it refers to no lexicals outside its own scope. Contrast this with the following make_adder() function, in which the returned anonymous function contains a reference to a lexical variable outside the scope of that function itself. Such a reference requires that Perl return a proper closure, thus locking in for all time the value that the lexical had when the function was created. sub make_adder { my $addpiece = shift; return sub { shift + $addpiece }; } $f1 = make_adder(20); $f2 = make_adder(555); Now `&$f1($n)' is always 20 plus whatever $n you pass in, whereas `&$f2($n)' is always 555 plus whatever $n you pass in. The $addpiece in the closure sticks around. Closures are often used for less esoteric purposes. For example, when you want to pass in a bit of code into a function: my $line; timeout( 30, sub { $line = <STDIN> } ); If the code to execute had been passed in as a string, `'$line = <STDIN>'', there would have been no way for the hypothetical timeout() function to access the lexical variable $line back in its caller's scope. What is variable suicide and how can I prevent it? Variable suicide is when you (temporarily or permanently) lose the value of a variable. It is caused by scoping through my() and local() interacting with either closures or aliased foreach() iterator variables and subroutine arguments. It used to be easy to inadvertently lose a variable's value this way, but now it's much harder. Take this code: my $f = "foo"; sub T { while ($i++ < 3) { my $f = $f; $f .= "bar"; print $f, "\n" } } T; print "Finally $f\n"; The $f that has "bar" added to it three times should be a new `$f' (`my $f' should create a new local variable each time through the loop). It isn't, however. This was a bug, now fixed in the latest releases (tested against 5.004_05, 5.005_03, and 5.005_56). How can I pass/return a {Function, FileHandle, Array, Hash, Method, Regex}? With the exception of regexes, you need to pass references to these objects. See the Pass by Reference entry in the perlsub manpage for this particular question, and the perlref manpage for information on references. Passing Variables and Functions Regular variables and functions are quite easy: just pass in a reference to an existing or anonymous variable or function: func( \$some_scalar ); func( \@some_array ); func( [ 1 .. 10 ] ); func( \%some_hash ); func( { this => 10, that => 20 } ); func( \&some_func ); func( sub { $_[0] ** $_[1] } ); Passing Filehandles To pass filehandles to subroutines, use the `*FH' or `\*FH' notations. These are "typeglobs" - see the Typeglobs and Filehandles entry in the perldata manpage and especially the Pass by Reference entry in the perlsub manpage for more information. Here's an excerpt: If you're passing around filehandles, you could usually just use the bare typeglob, like *STDOUT, but typeglobs references would be better because they'll still work properly under `use strict 'refs''. For example: splutter(\*STDOUT); sub splutter { my $fh = shift; print $fh "her um well a hmmm\n"; } $rec = get_rec(\*STDIN); sub get_rec { my $fh = shift; return scalar <$fh>; } If you're planning on generating new filehandles, you could do this: sub openit { my $name = shift; local *FH; return open (FH, $path) ? *FH : undef; } $fh = openit('< /etc/motd'); print <$fh>; Passing Regexes To pass regexes around, you'll need to be using a release of Perl sufficiently recent as to support the `qr//' construct, pass around strings and use an exception-trapping eval, or else be very, very clever. Here's an example of how to pass in a string to be regex compared using `qr//': sub compare($$) { my ($val1, $regex) = @_; my $retval = $val1 =~ /$regex/; return $retval; } $match = compare("old McDonald", qr/d.*D/i); Notice how `qr//' allows flags at the end. That pattern was compiled at compile time, although it was executed later. The nifty `qr//' notation wasn't introduced until the 5.005 release. Before that, you had to approach this problem much less intuitively. For example, here it is again if you don't have `qr//': sub compare($$) { my ($val1, $regex) = @_; my $retval = eval { $val1 =~ /$regex/ }; die if $@; return $retval; } $match = compare("old McDonald", q/($?i)d.*D/); Make sure you never say something like this: return eval "\$val =~ /$regex/"; # WRONG or someone can sneak shell escapes into the regex due to the double interpolation of the eval and the double- quoted string. For example: $pattern_of_evil = 'danger ${ system("rm -rf * &") } danger'; eval "\$string =~ /$pattern_of_evil/"; Those preferring to be very, very clever might see the O'Reilly book, Mastering Regular Expressions, by Jeffrey Friedl. Page 273's Build_MatchMany_Function() is particularly interesting. A complete citation of this book is given in the perlfaq2 manpage. Passing Methods To pass an object method into a subroutine, you can do this: call_a_lot(10, $some_obj, "methname") sub call_a_lot { my ($count, $widget, $trick) = @_; for (my $i = 0; $i < $count; $i++) { $widget->$trick(); } } Or you can use a closure to bundle up the object and its method call and arguments: my $whatnot = sub { $some_obj->obfuscate(@args) }; func($whatnot); sub func { my $code = shift; &$code(); } You could also investigate the can() method in the UNIVERSAL class (part of the standard perl distribution). How do I create a static variable? As with most things in Perl, TMTOWTDI. What is a "static variable" in other languages could be either a function- private variable (visible only within a single function, retaining its value between calls to that function), or a file-private variable (visible only to functions within the file it was declared in) in Perl. Here's code to implement a function-private variable: BEGIN { my $counter = 42; sub prev_counter { return --$counter } sub next_counter { return $counter++ } } Now prev_counter() and next_counter() share a private variable $counter that was initialized at compile time. To declare a file-private variable, you'll still use a my(), putting it at the outer scope level at the top of the file. Assume this is in file Pax.pm: package Pax; my $started = scalar(localtime(time())); sub begun { return $started } When `use Pax' or `require Pax' loads this module, the variable will be initialized. It won't get garbage- collected the way most variables going out of scope do, because the begun() function cares about it, but no one else can get it. It is not called $Pax::started because its scope is unrelated to the package. It's scoped to the file. You could conceivably have several packages in that same file all accessing the same private variable, but another file with the same package couldn't get to it. See the Persistent Private Variables entry in the perlsub manpage for details. What's the difference between dynamic and lexical (static) scoping? Between local() and my()? `local($x)' saves away the old value of the global variable `$x', and assigns a new value for the duration of the subroutine, which is visible in other functions called from that subroutine. This is done at run-time, so is called dynamic scoping. local() always affects global variables, also called package variables or dynamic variables. `my($x)' creates a new variable that is only visible in the current subroutine. This is done at compile-time, so is called lexical or static scoping. my() always affects private variables, also called lexical variables or (improperly) static(ly scoped) variables. For instance: sub visible { print "var has value $var\n"; } sub dynamic { local $var = 'local'; # new temporary value for the still-global visible(); # variable called $var } sub lexical { my $var = 'private'; # new private variable, $var visible(); # (invisible outside of sub scope) } $var = 'global'; visible(); # prints global dynamic(); # prints local lexical(); # prints global Notice how at no point does the value "private" get printed. That's because $var only has that value within the block of the lexical() function, and it is hidden from called subroutine. In summary, local() doesn't make what you think of as private, local variables. It gives a global variable a temporary value. my() is what you're looking for if you want private variables. See the Private Variables via my() entry in the perlsub manpage and the Temporary Values via local() entry in the perlsub manpage for excruciating details. How can I access a dynamic variable while a similarly named lexical is in scope? You can do this via symbolic references, provided you haven't set `use strict "refs"'. So instead of $var, use `${'var'}'. local $var = "global"; my $var = "lexical"; print "lexical is $var\n"; no strict 'refs'; print "global is ${'var'}\n"; If you know your package, you can just mention it explicitly, as in $Some_Pack::var. Note that the notation $::var is not the dynamic $var in the current package, but rather the one in the `main' package, as though you had written $main::var. Specifying the package directly makes you hard-code its name, but it executes faster and avoids running afoul of `use strict "refs"'. What's the difference between deep and shallow binding? In deep binding, lexical variables mentioned in anonymous subroutines are the same ones that were in scope when the subroutine was created. In shallow binding, they are whichever variables with the same names happen to be in scope when the subroutine is called. Perl always uses deep binding of lexical variables (i.e., those created with my()). However, dynamic variables (aka global, local, or package variables) are effectively shallowly bound. Consider this just one more reason not to use them. See the answer to the section on "What's a closure?". Why doesn't "my($foo) = <FILE>;" work right? `my()' and `local()' give list context to the right hand side of `='. The <FH> read operation, like so many of Perl's functions and operators, can tell which context it was called in and behaves appropriately. In general, the scalar() function can help. This function does nothing to the data itself (contrary to popular myth) but rather tells its argument to behave in whatever its scalar fashion is. If that function doesn't have a defined scalar behavior, this of course doesn't help you (such as with sort()). To enforce scalar context in this particular case, however, you need merely omit the parentheses: local($foo) = <FILE>; # WRONG local($foo) = scalar(<FILE>); # ok local $foo = <FILE>; # right You should probably be using lexical variables anyway, although the issue is the same here: my($foo) = <FILE>; # WRONG my $foo = <FILE>; # right How do I redefine a builtin function, operator, or method? Why do you want to do that? :-) If you want to override a predefined function, such as open(), then you'll have to import the new definition from a different module. See the Overriding Built-in Functions entry in the perlsub manpage. There's also an example in the Class::Template entry in the perltoot manpage. If you want to overload a Perl operator, such as `+' or `**', then you'll want to use the `use overload' pragma, documented in the overload manpage. If you're talking about obscuring method calls in parent classes, see the Overridden Methods entry in the perltoot manpage. What's the difference between calling a function as &foo and foo()? When you call a function as `&foo', you allow that function access to your current @_ values, and you by-pass prototypes. That means that the function doesn't get an empty @_, it gets yours! While not strictly speaking a bug (it's documented that way in the perlsub manpage), it would be hard to consider this a feature in most cases. When you call your function as `&foo()', then you do get a new @_, but prototyping is still circumvented. Normally, you want to call a function using `foo()'. You may only omit the parentheses if the function is already known to the compiler because it already saw the definition (`use' but not `require'), or via a forward reference or `use subs' declaration. Even in this case, you get a clean @_ without any of the old values leaking through where they don't belong. How do I create a switch or case statement? This is explained in more depth in the the perlsyn manpage. Briefly, there's no official case statement, because of the variety of tests possible in Perl (numeric comparison, string comparison, glob comparison, regex matching, overloaded comparisons, ...). Larry couldn't decide how best to do this, so he left it out, even though it's been on the wish list since perl1. The general answer is to write a construct like this: for ($variable_to_test) { if (/pat1/) { } # do something elsif (/pat2/) { } # do something else elsif (/pat3/) { } # do something else else { } # default } Here's a simple example of a switch based on pattern matching, this time lined up in a way to make it look more like a switch statement. We'll do a multi-way conditional based on the type of reference stored in $whatchamacallit: SWITCH: for (ref $whatchamacallit) { /^$/ && die "not a reference"; /SCALAR/ && do { print_scalar($$ref); last SWITCH; }; /ARRAY/ && do { print_array(@$ref); last SWITCH; }; /HASH/ && do { print_hash(%$ref); last SWITCH; }; /CODE/ && do { warn "can't print function ref"; last SWITCH; }; # DEFAULT warn "User defined type skipped"; } See `perlsyn/"Basic BLOCKs and Switch Statements"' for many other examples in this style. Sometimes you should change the positions of the constant and the variable. For example, let's say you wanted to test which of many answers you were given, but in a case- insensitive way that also allows abbreviations. You can use the following technique if the strings all start with different characters, or if you want to arrange the matches so that one takes precedence over another, as `"SEND"' has precedence over `"STOP"' here: chomp($answer = <>); if ("SEND" =~ /^\Q$answer/i) { print "Action is send\n" } elsif ("STOP" =~ /^\Q$answer/i) { print "Action is stop\n" } elsif ("ABORT" =~ /^\Q$answer/i) { print "Action is abort\n" } elsif ("LIST" =~ /^\Q$answer/i) { print "Action is list\n" } elsif ("EDIT" =~ /^\Q$answer/i) { print "Action is edit\n" } A totally different approach is to create a hash of function references. my %commands = ( "happy" => \&joy, "sad", => \&sullen, "done" => sub { die "See ya!" }, "mad" => \&angry, ); print "How are you? "; chomp($string = <STDIN>); if ($commands{$string}) { $commands{$string}->(); } else { print "No such command: $string\n"; } How can I catch accesses to undefined variables/functions/methods? The AUTOLOAD method, discussed in the Autoloading entry in the perlsub manpage and the AUTOLOAD: Proxy Methods entry in the perltoot manpage, lets you capture calls to undefined functions and methods. When it comes to undefined variables that would trigger a warning under `-w', you can use a handler to trap the pseudo-signal `__WARN__' like this: $SIG{__WARN__} = sub { for ( $_[0] ) { # voici un switch statement /Use of uninitialized value/ && do { # promote warning to a fatal die $_; }; # other warning cases to catch could go here; warn $_; } }; Why can't a method included in this same file be found? Some possible reasons: your inheritance is getting confused, you've misspelled the method name, or the object is of the wrong type. Check out the perltoot manpage for details on these. You may also use `print ref($object)' to find out the class `$object' was blessed into. Another possible reason for problems is because you've used the indirect object syntax (eg, `find Guru "Samy"') on a class name before Perl has seen that such a package exists. It's wisest to make sure your packages are all defined before you start using them, which will be taken care of if you use the `use' statement instead of `require'. If not, make sure to use arrow notation (eg, `Guru->find("Samy")') instead. Object notation is explained in the perlobj manpage. Make sure to read about creating modules in the perlmod manpage and the perils of indirect objects in the WARNING entry in the perlobj manpage. How can I find out my current package? If you're just a random program, you can do this to find out what the currently compiled package is: my $packname = __PACKAGE__; But if you're a method and you want to print an error message that includes the kind of object you were called on (which is not necessarily the same as the one in which you were compiled): sub amethod { my $self = shift; my $class = ref($self) || $self; warn "called me from a $class object"; } How can I comment out a large block of perl code? Use embedded POD to discard it: # program is here =for nobody This paragraph is commented out # program continues =begin comment text all of this stuff here will be ignored by everyone =end comment text =cut This can't go just anywhere. You have to put a pod directive where the parser is expecting a new statement, not just in the middle of an expression or some other arbitrary yacc grammar production. How do I clear a package? Use this code, provided by Mark-Jason Dominus: sub scrub_package { no strict 'refs'; my $pack = shift; die "Shouldn't delete main package" if $pack eq "" || $pack eq "main"; my $stash = *{$pack . '::'}{HASH}; my $name; foreach $name (keys %$stash) { my $fullname = $pack . '::' . $name; # Get rid of everything with that name. undef $$fullname; undef @$fullname; undef %$fullname; undef &$fullname; undef *$fullname; } } Or, if you're using a recent release of Perl, you can just use the Symbol::delete_package() function instead. How can I use a variable as a variable name? Beginners often think they want to have a variable contain the name of a variable. $fred = 23; $varname = "fred"; ++$$varname; # $fred now 24 This works sometimes, but it is a very bad idea for two reasons. The first reason is that they only work on global variables. That means above that if $fred is a lexical variable created with my(), that the code won't work at all: you'll accidentally access the global and skip right over the private lexical altogether. Global variables are bad because they can easily collide accidentally and in general make for non-scalable and confusing code. Symbolic references are forbidden under the `use strict' pragma. They are not true references and consequently are not reference counted or garbage collected. The other reason why using a variable to hold the name of another variable a bad idea is that the question often stems from a lack of understanding of Perl data structures, particularly hashes. By using symbolic references, you are just using the package's symbol-table hash (like `%main::') instead of a user-defined hash. The solution is to use your own hash or a real reference instead. $fred = 23; $varname = "fred"; $USER_VARS{$varname}++; # not $$varname++ There we're using the %USER_VARS hash instead of symbolic references. Sometimes this comes up in reading strings from the user with variable references and wanting to expand them to the values of your perl program's variables. This is also a bad idea because it conflates the program-addressable namespace and the user-addressable one. Instead of reading a string and expanding it to the actual contents of your program's own variables: $str = 'this has a $fred and $barney in it'; $str =~ s/(\$\w+)/$1/eeg; # need double eval Instead, it would be better to keep a hash around like %USER_VARS and have variable references actually refer to entries in that hash: $str =~ s/\$(\w+)/$USER_VARS{$1}/g; # no /e here at all That's faster, cleaner, and safer than the previous approach. Of course, you don't need to use a dollar sign. You could use your own scheme to make it less confusing, like bracketed percent symbols, etc. $str = 'this has a %fred% and %barney% in it'; $str =~ s/%(\w+)%/$USER_VARS{$1}/g; # no /e here at all Another reason that folks sometimes think they want a variable to contain the name of a variable is because they don't know how to build proper data structures using hashes. For example, let's say they wanted two hashes in their program: %fred and %barney, and to use another scalar variable to refer to those by name. $name = "fred"; $$name{WIFE} = "wilma"; # set %fred $name = "barney"; $$name{WIFE} = "betty"; # set %barney This is still a symbolic reference, and is still saddled with the problems enumerated above. It would be far better to write: $folks{"fred"}{WIFE} = "wilma"; $folks{"barney"}{WIFE} = "betty"; And just use a multilevel hash to start with. The only times that you absolutely must use symbolic references are when you really must refer to the symbol table. This may be because it's something that can't take a real reference to, such as a format name. Doing so may also be important for method calls, since these always go through the symbol table for resolution. In those cases, you would turn off `strict 'refs'' temporarily so you can play around with the symbol table. For example: @colors = qw(red blue green yellow orange purple violet); for my $name (@colors) { no strict 'refs'; # renege for the block *$name = sub { "<FONT COLOR='$name'>@_</FONT>" }; } All those functions (red(), blue(), green(), etc.) appear to be separate, but the real code in the closure actually was compiled only once. So, sometimes you might want to use symbolic references to directly manipulate the symbol table. This doesn't matter for formats, handles, and subroutines, because they are always global -- you can't use my() on them. But for scalars, arrays, and hashes -- and usually for subroutines -- you probably want to use hard references only.AUTHOR AND COPYRIGHT
Copyright (c) 1997-1999 Tom Christiansen and Nathan Torkington. All rights reserved. When included as part of the Standard Version of Perl, or as part of its complete documentation whether printed or otherwise, this work may be distributed only under the terms of Perl's Artistic License. Any distribution of this file or derivatives thereof outside of that package require that special arrangements be made with copyright holder. Irrespective of its distribution, all code examples in this file are hereby placed into the public domain. You are permitted and encouraged to use this code in your own programs for fun or for profit as you see fit. A simple comment in the code giving credit would be courteous but is not required.
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |