Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Wed Jun 12 16:15:55 2024 +0200
ACPI: EC: Evaluate orphan _REG under EC device
commit 0e6b6dedf16800df0ff73ffe2bb5066514db29c2 upstream.
After starting to install the EC address space handler at the ACPI
namespace root, if there is an "orphan" _REG method in the EC device's
scope, it will not be evaluated any more. This breaks EC operation
regions on some systems, like Asus gu605.
To address this, use a wrapper around an existing ACPICA function to
look for an "orphan" _REG method in the EC device scope and evaluate
it if present.
Fixes: 60fa6ae6e6d0 ("ACPI: EC: Install address space handler at the namespace root")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218945
Reported-by: VitaliiT <vitaly.torshyn@gmail.com>
Tested-by: VitaliiT <vitaly.torshyn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Wed May 15 21:40:54 2024 +0200
ACPI: EC: Install address space handler at the namespace root
[ Upstream commit 60fa6ae6e6d09e377fce6f8d9b6f6a4d88769f63 ]
It is reported that _DSM evaluation fails in ucsi_acpi_dsm() on Lenovo
IdeaPad Pro 5 due to a missing address space handler for the EC address
space:
ACPI Error: No handler for Region [ECSI] (000000007b8176ee) [EmbeddedControl] (20230628/evregion-130)
This happens because if there is no ECDT, the EC driver only registers
the EC address space handler for operation regions defined in the EC
device scope of the ACPI namespace while the operation region being
accessed by the _DSM in question is located beyond that scope.
To address this, modify the ACPI EC driver to install the EC address
space handler at the root of the ACPI namespace for the first EC that
can be found regardless of whether or not an ECDT is present.
Note that this change is consistent with some examples in the ACPI
specification in which EC operation regions located outside the EC
device scope are used (for example, see Section 9.17.15 in ACPI 6.5),
so the current behavior of the EC driver is arguably questionable.
Reported-by: webcaptcha <webcapcha@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218789
Link: https://uefi.org/specs/ACPI/6.5/09_ACPI_Defined_Devices_and_Device_Specific_Objects.html#example-asl-code
Link: https://lore.kernel.org/linux-acpi/Zi+0whTvDbAdveHq@kuha.fi.intel.com
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guenter Schafranek <gschafra@web.de>
Date: Mon Apr 15 20:51:18 2024 +0200
ACPI: resource: Do IRQ override on GMxBGxx (XMG APEX 17 M23)
[ Upstream commit 6eaf375a5a98642ba4c327f79673f4f308e0ac03 ]
The XM APEX 17 M23 (TongFang?) GMxBGxx (got using `sudo dmidecode -s
baseboard-product-name`) needs IRQ overriding for the keyboard to work.
Adding an entry for this laptop to the override_table makes the internal
keyboard functional [1].
Successfully tested with Arch Linux Kernel v6.8 under Manjaro Linux v23.1.4.
Link: https://www.reddit.com/r/XMG_gg/comments/15kd5pg/xmg_apex_17_m23_keyboard_not_working_on_linux/ # [1]
Signed-off-by: Guenter Schafranek <gschafra@web.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tamim Khan <tamim@fusetak.com>
Date: Sun Apr 28 13:08:12 2024 -0400
ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MV
[ Upstream commit 7c52c7071bd403acee8cb0064627d46c6c2a1ea3 ]
Like various other Asus Vivobook and Expertbook laptops, the Asus
Vivobook Pro N6506MV has a DSDT table that describes IRQ 1 as ActiveLow
while the kernel is overriding it to Edge_High. This prevents the internal
keyboard from working. This patch prevents this issue by adding this laptop
to the override table that prevents the kernel from overriding this IRQ
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218745
Tested-by: Gianni <gianni.casagrande.mail@gmail.com>
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Wed Jun 12 12:42:20 2024 +0200
ACPI: scan: Ignore camera graph port nodes on all Dell Tiger, Alder and Raptor Lake models
[ Upstream commit c7be64355fccfe7d4727681e32fce07113e40af1 ]
Dell laptops with IPU6 camera (the Tiger Lake, Alder Lake and Raptor
Lake generations) have broken ACPI MIPI DISCO information (this results
from an OEM attempt to make Linux work by supplying it with custom data
in the ACPI tables which has never been supported in the mainline).
Instead of adding a lot of DMI quirks for this, check for Dell platforms
based on the processor generations in question and drop the ACPI graph
port nodes, likely to be created with the help of invalid data, on all
of them.
Fixes: bd721b934323 ("ACPI: scan: Extract CSI-2 connection graph from _CRS")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Mon May 6 16:08:50 2024 +0200
ACPI: video: Add backlight=native quirk for Lenovo Slim 7 16ARH7
[ Upstream commit c901f63dc142c48326931f164f787dfff69273d9 ]
Lenovo Slim 7 16ARH7 is a machine with switchable graphics between AMD
and Nvidia, and the backlight can't be adjusted properly unless
acpi_backlight=native is passed. Although nvidia-wmi-backlight is
present and loaded, this doesn't work as expected at all.
For making it working as default, add the corresponding quirk entry
with a DMI matching "LENOVO" "82UX".
Link: https://bugzilla.suse.com/show_bug.cgi?id=1217750
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Apr 6 15:56:25 2024 +0200
ACPI: x86: Add PNP_UART1_SKIP quirk for Lenovo Blade2 tablets
[ Upstream commit d8f20383a2fc3a3844b08a4999cf0e81164a0e56 ]
The x86 Android tablets on which quirks to skip looking for a matching
UartSerialBus resource and instead unconditionally create a serial bus
device (serdev) are necessary there are 2 sorts of serialports:
ACPI enumerated highspeed designware UARTs, these are the ones which
typcially need to be skipped since they need a serdev for the attached
BT HCI.
A PNP enumerated UART which is part of the PCU. So far the existing
quirks have ignored this. But on the Lenovo Yoga Tablet 2 Pro 1380
models this is used for a custom fastcharging protocol. There is
a Micro USB switch which can switch the USB data lines to this uart
and then a 600 baud protocol is used to configure the charger for
a voltage higher then 5V.
Add a new ACPI_QUIRK_PNP_UART1_SKIP quirk type and set this for
the existing entry for the Lenovo Yoga Tablet 2 830 / 1050 models.
Note this will lead to unnecessarily also creating a serdev for
the PCU UART on the 830 / 1050 which don't need this, but the UART
is not used otherwise there so that is not a problem.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Raju Rangoju <Raju.Rangoju@amd.com>
Date: Fri Jun 14 19:31:49 2024 +0530
ACPICA: Revert "ACPICA: avoid Info: mapping multiple BARs. Your kernel is fine."
[ Upstream commit a83e1385b780d41307433ddbc86e3c528db031f0 ]
Undo the modifications made in commit d410ee5109a1 ("ACPICA: avoid
"Info: mapping multiple BARs. Your kernel is fine.""). The initial
purpose of this commit was to stop memory mappings for operation
regions from overlapping page boundaries, as it can trigger warnings
if different page attributes are present.
However, it was found that when this situation arises, mapping
continues until the boundary's end, but there is still an attempt to
read/write the entire length of the map, leading to a NULL pointer
deference. For example, if a four-byte mapping request is made but
only one byte is mapped because it hits the current page boundary's
end, a four-byte read/write attempt is still made, resulting in a NULL
pointer deference.
Instead, map the entire length, as the ACPI specification does not
mandate that it must be within the same page boundary. It is
permissible for it to be mapped across different regions.
Link: https://github.com/acpica/acpica/pull/954
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218849
Fixes: d410ee5109a1 ("ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine."")
Co-developed-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Apr 5 11:49:39 2024 +0000
af_packet: avoid a false positive warning in packet_setsockopt()
[ Upstream commit 86d43e2bf93ccac88ef71cee36a23282ebd9e427 ]
Although the code is correct, the following line
copy_from_sockptr(&req_u.req, optval, len));
triggers this warning :
memcpy: detected field-spanning write (size 28) of single field "dst" at include/linux/sockptr.h:49 (size 16)
Refactor the code to be more explicit.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Date: Fri Jun 7 09:00:21 2024 +0300
ALSA/hda: intel-dsp-config: Document AVS as dsp_driver option
[ Upstream commit 2646b43910c0e6d7f4ad535919b44b88f98c688d ]
dsp_driver=4 will force the AVS driver stack to be used, it is better to
docuement this.
Fixes: 1affc44ea5dd ("ASoC: Intel: avs: PCI driver implementation")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240607060021.11503-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Caño <pablocpascual@gmail.com>
Date: Thu Jun 20 17:25:33 2024 +0200
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14AHP9
commit ad22051afdad962b6012f3823d0ed1a735935386 upstream.
Lenovo Yoga Pro 7 14AHP9 (PCI SSID 17aa:3891) seems requiring a similar workaround like Yoga 9 model and Yoga 7 Pro 14APH8 for the bass speaker.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20231207182035.30248-1-tiwai@suse.de/
Signed-off-by: Pablo Caño <pablocpascual@gmail.com>
Link: https://patch.msgid.link/20240620152533.76712-1-pablocpascual@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Stefan Binding <sbinding@opensource.cirrus.com>
Date: Thu Apr 11 12:08:09 2024 +0100
ALSA: hda/realtek: Add quirks for HP Omen models using CS35L41
[ Upstream commit 875e0cd59758a3d636ce94936287787514305095 ]
Add 4 laptops using CS35L41 HDA.
None of these laptops have _DSD, so require entries in property
configuration table for cs35l41_hda driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240411110813.330483-4-sbinding@opensource.cirrus.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stefan Binding <sbinding@opensource.cirrus.com>
Date: Tue Apr 23 17:23:03 2024 +0100
ALSA: hda/realtek: Add quirks for Lenovo 13X
[ Upstream commit 25f46354dca912c84f1f79468fd636a94b8d287a ]
Add laptop using CS35L41 HDA.
This laptop does not have _DSD, so require entries in property
configuration table for cs35l41_hda driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Message-ID: <20240423162303.638211-3-sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ajrat Makhmutov <rautyrauty@gmail.com>
Date: Sat Jun 15 15:54:57 2024 +0300
ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM
[ Upstream commit b1fd0d1285b1eae8b99af36fb26ed2512b809af6 ]
Headset microphone do not work out of the box with this laptop. This
quirk fixes it. Zihao Wang specified the wrong subsystem id in his patch.
Link: https://lore.kernel.org/all/20220424084120.74125-1-wzhd@ustc.edu/
Fixes: 3b79954fd00d ("ALSA: hda/realtek: Add quirk for Yoga Duet 7 13ITL6 speakers")
Signed-off-by: Ajrat Makhmutov <rauty@altlinux.org>
Link: https://lore.kernel.org/r/20240615125457.167844-1-rauty@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Chi <andy.chi@canonical.com>
Date: Wed Jun 5 17:22:41 2024 +0800
ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 445/465 G11.
commit ea5f8c4cffcd8a6b62b3a3bd5008275218c9d02a upstream.
HP ProBook 445/465 G11 needs ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to
make mic-mute/audio-mute working.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240605092243.41963-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Date: Wed Jun 5 12:39:23 2024 -0300
ALSA: hda/realtek: Limit mic boost on N14AP7
commit 86a433862912f52597263aa224a9ed82bcd533bf upstream.
The internal mic boost on the N14AP7 is too high. Fix this by applying the
ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine to limit the gain.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240605153923.2837-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dustin L. Howett <dustin@howett.net>
Date: Wed Jun 5 12:01:32 2024 -0500
ALSA: hda/realtek: Remove Framework Laptop 16 from quirks
[ Upstream commit e799bdf51d54bebaf939fdb655aad424e624c1b1 ]
The Framework Laptop 16 does not have a combination headphone/headset
3.5mm jack; however, applying the pincfg from the Laptop 13 (nid=0x19)
erroneously informs hda that the node is present.
Fixes: 8804fa04a492 ("ALSA: hda/realtek: Add Framework laptop 16 to quirks")
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240605-alsa-hda-realtek-remove-framework-laptop-16-from-quirks-v1-1-11d47fe8ec4d@howett.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Simon Trimmer <simont@opensource.cirrus.com>
Date: Thu Jun 13 14:37:12 2024 +0100
ALSA: hda: cs35l41: Component should be unbound before deconstruction
[ Upstream commit 6f9a40d61cad0f5560e8530b4dd4a05fc4d15987 ]
The interface associated with the hda_component should be deactivated
before the driver is deconstructed during removal.
Fixes: 7b2f3eb492da ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240613133713.75550-3-simont@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Simon Trimmer <simont@opensource.cirrus.com>
Date: Fri May 31 13:08:20 2024 +0100
ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind()
[ Upstream commit 6386682cdc8b41319c92fbbe421953e33a28840c ]
The cs35l41_hda_unbind() function clears the hda_component entry
matching it's index and then dereferences the codec pointer held in the
first element of the hda_component array, this is an issue when the
device index was 0.
Instead use the codec pointer stashed in the cs35l41_hda structure as it
will still be valid.
Fixes: 7cf5ce66dfda ("ALSA: hda: cs35l41: Add device_link between HDA and cs35l41_hda")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240531120820.35367-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Simon Trimmer <simont@opensource.cirrus.com>
Date: Thu Jun 13 14:37:11 2024 +0100
ALSA: hda: cs35l56: Component should be unbound before deconstruction
[ Upstream commit 721f2e6653f5ab0cc52b3a459c4a2158b92fcf80 ]
The interface associated with the hda_component should be deactivated
before the driver is deconstructed during removal.
Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240613133713.75550-2-simont@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Simon Trimmer <simont@opensource.cirrus.com>
Date: Thu Jun 13 14:37:13 2024 +0100
ALSA: hda: tas2781: Component should be unbound before deconstruction
[ Upstream commit d832b5a03e94a2a9f866dab3d04937a0f84ea116 ]
The interface associated with the hda_component should be deactivated
before the driver is deconstructed during removal.
Fixes: 4e7914eb1dae ("ALSA: hda/tas2781: remove sound controls in unbind")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240613133713.75550-4-simont@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Fri May 31 14:37:17 2024 +0200
ALSA: seq: ump: Fix missing System Reset message handling
[ Upstream commit 55fac50ea46f46a22a92e2139b92afaa3822ad19 ]
The conversion from System Reset event to UMP was missing.
Add the entry for a conversion to a proper UMP System message.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240531123718.13420-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shiqi Liu <shiqiliu@hust.edu.cn>
Date: Sun Apr 21 14:33:28 2024 +0800
arm64/sysreg: Update PIE permission encodings
[ Upstream commit 12d712dc8e4f1a30b18f8c3789adfbc07f5eb050 ]
Fix left shift overflow issue when the parameter idx is greater than or
equal to 8 in the calculation of perm in PIRx_ELx_PERM macro.
Fix this by modifying the encoding to use a long integer type.
Signed-off-by: Shiqi Liu <shiqiliu@hust.edu.cn>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240421063328.29710-1-shiqiliu@hust.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed Apr 24 04:19:27 2024 +0300
arm64: defconfig: select INTERCONNECT_QCOM_SM6115 as built-in
[ Upstream commit b052c7fe3cb787282ab7e1fa088c794a1eb7fdb0 ]
Enable CONFIG_INTERCONNECT_QCOM_SM6115 as built-in to enable the
interconnect driver for the SoC used on Qualcomm Robotics RB2 board.
Building as built-in is required as on this platform interconnects are
required to bring up the console.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240424-enable-sm6115-icc-v3-1-21c83be48f0e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Max Krummenacher <max.krummenacher@toradex.com>
Date: Mon Jun 3 16:00:45 2024 +0200
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
[ Upstream commit 67cc6125fb39902169707cb6277f010e56d4a40a ]
SODIMM 17 can be used as an edge triggered interrupt supplied from an
off board source.
Enable hysteresis on the pinmuxing to increase immunity against noise
on the signal.
Fixes: 60f01b5b5c7d ("arm64: dts: imx8mm-verdin: update iomux configuration")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Date: Tue May 7 11:35:55 2024 -0300
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed
[ Upstream commit 08f0fa5d6aa9488f752eb5410e32636f143b3d8e ]
The GPU clock was reduced on iMX8MM SOC device tree to prevent boards
that don't support GPU overdrive from being out of specification. However,
this caused a regression in GPU speed for the Verdin iMX8MM, which does
support GPU overdrive. This patch fixes this by enabling overdrive mode
in the SOM dtsi.
Fixes: 1f794d3eed53 ("arm64: dts: imx8mm: Reduce GPU to nominal speed")
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tim Harvey <tharvey@gateworks.com>
Date: Wed May 22 14:38:28 2024 -0700
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
[ Upstream commit e1b4622efbe7ad09c9a902365a993f68c270c453 ]
Fix the invalid BT shutdown GPIO (gpio1_io3 not gpio4_io16)
Fixes: 716ced308234 ("arm64: dts: freescale: Add imx8mp-venice-gw73xx-2x")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marek Vasut <marex@denx.de>
Date: Sat Jun 15 16:00:43 2024 +0800
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
[ Upstream commit c03984d43a9dd9282da54ccf275419f666029452 ]
The IMX8MP_CLK_CLKOUT2 supplies the TC9595 bridge with 13 MHz reference
clock. The IMX8MP_CLK_CLKOUT2 is supplied from IMX8MP_AUDIO_PLL2_OUT.
The IMX8MP_CLK_CLKOUT2 operates only as a power-of-two divider, and the
current 156 MHz is not power-of-two divisible to achieve 13 MHz.
To achieve 13 MHz output from IMX8MP_CLK_CLKOUT2, set IMX8MP_AUDIO_PLL2_OUT
to 208 MHz, because 208 MHz / 16 = 13 MHz.
Fixes: 20d0b83e712b ("arm64: dts: imx8mp: Add TC9595 bridge on DH electronics i.MX8M Plus DHCOM")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Frank Li <Frank.Li@nxp.com>
Date: Fri Jun 14 11:06:32 2024 -0400
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
commit dfd239a039b3581ca25f932e66b6e2c2bf77c798 upstream.
The gpio in "reg_usdhc2_vmmc" should be 7 instead of 19.
Cc: stable@vger.kernel.org
Fixes: 307fd14d4b14 ("arm64: dts: imx: add imx8qm mek support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fabio Estevam <festevam@gmail.com>
Date: Wed May 29 00:48:54 2024 -0300
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
[ Upstream commit a5d400b6439ac734a5c0dbb641e26a38736abc17 ]
The usdhc2 port is connected to the microSD slot. The presence of the
'no-sdio' property prevents Wifi SDIO cards, such as CMP9010-X-EVB [1]
to be detected.
Remove the 'no-sdio' property so that SDIO cards could also work.
[1] https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/cmp9010-x-evb-iw416-usd-interface-evaluation-board:CMP9010-X-EVB
Fixes: e37907bd8294 ("arm64: dts: freescale: add i.MX93 11x11 EVK basic support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liu Ying <victor.liu@nxp.com>
Date: Tue May 14 11:07:18 2024 +0800
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
[ Upstream commit bcdea3e81ea51c9e89e3b11aac2612e1b4330bee ]
We cannot use /delete-node/ directive to delete a node in a DT
overlay. The node won't be deleted effectively. Instead, set
the node's status property to "disabled" to achieve something
similar.
Fixes: eeb403df953f ("ARM: dts: imx53-qsb: add support for the HDMI expander")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Date: Fri Apr 26 10:21:20 2024 -0500
ASoC: Intel: sof-sdw: really remove FOUR_SPEAKER quirk
commit 0bab4cfd7c1560095e29919e2ebe01783b9096dc upstream.
Two independent GitHub PRs let to the addition of one quirk after it
was removed..
Fixes: b10cb955c6c0 ("ASoC: Intel: sof_sdw: add quirk for Dell SKU 0C0F")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Date: Thu Apr 11 17:03:38 2024 -0500
ASoC: Intel: sof_sdw: add JD2 quirk for HP Omen 14
[ Upstream commit 4fee07fbf47d2a5f1065d985459e5ce7bf7969f0 ]
The default JD1 does not seem to work, use JD2 instead.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Date: Thu Apr 11 17:03:39 2024 -0500
ASoC: Intel: sof_sdw: add quirk for Dell SKU 0C0F
[ Upstream commit b10cb955c6c0b8dbd9a768166d71cc12680b7fdf ]
The JD1 jack detection doesn't seem to work, use JD2.
Also use the 4 speaker configuration.
Link: https://github.com/thesofproject/linux/issues/4900
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Niklas Cassel <cassel@kernel.org>
Date: Tue Jun 18 17:28:29 2024 +0200
ata: ahci: Do not enable LPM if no LPM states are supported by the HBA
commit fa997b0576c9df635ee363406f5e014dba0f9264 upstream.
LPM consists of HIPM (host initiated power management) and DIPM
(device initiated power management).
ata_eh_set_lpm() will only enable HIPM if both the HBA and the device
supports it.
However, DIPM will be enabled as long as the device supports it.
The HBA will later reject the device's request to enter a power state
that it does not support (Slumber/Partial/DevSleep) (DevSleep is never
initiated by the device).
For a HBA that doesn't support any LPM states, simply don't set a LPM
policy such that all the HIPM/DIPM probing/enabling will be skipped.
Not enabling HIPM or DIPM in the first place is safer than relying on
the device following the AHCI specification and respecting the NAK.
(There are comments in the code that some devices misbehave when
receiving a NAK.)
Performing this check in ahci_update_initial_lpm_policy() also has the
advantage that a HBA that doesn't support any LPM states will take the
exact same code paths as a port that is external/hot plug capable.
Side note: the port in ata_port_dbg() has not been given a unique id yet,
but this is not overly important as the debug print is disabled unless
explicitly enabled using dynamic debug. A follow-up series will make sure
that the unique id assignment will be done earlier. For now, the important
thing is that the function returns before setting the LPM policy.
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240618152828.2686771-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Joao Pinto <Joao.Pinto@synopsys.com>
Date: Wed Mar 27 10:49:24 2024 +0000
Avoid hw_desc array overrun in dw-axi-dmac
[ Upstream commit 333e11bf47fa8d477db90e2900b1ed3c9ae9b697 ]
I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3
segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put()
handles the hw_desc considering the descs_allocated, this scenario would result in a
kernel panic (hw_desc array will be overrun).
To fix this, the proposal is to add a new member to the axi_dma_desc structure,
where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in
axi_desc_put() to handle the hw_desc array correctly.
Additionally I propose to remove the axi_chan_start_first_queued() call after completing
the transfer, since it was identified that unbalance can occur (started descriptors can
be interrupted and transfer ignored due to DMA channel not being enabled).
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Link: https://lore.kernel.org/r/1711536564-12919-1-git-send-email-jpinto@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Sat Mar 30 15:54:38 2024 +0000
batman-adv: bypass empty buckets in batadv_purge_orig_ref()
[ Upstream commit 40dc8ab605894acae1473e434944924a22cfaaa0 ]
Many syzbot reports are pointing to soft lockups in
batadv_purge_orig_ref() [1]
Root cause is unknown, but we can avoid spending too much
time there and perhaps get more interesting reports.
[1]
watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:6:621]
Modules linked in:
irq event stamp: 6182794
hardirqs last enabled at (6182793): [<ffff8000801dae10>] __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386
hardirqs last disabled at (6182794): [<ffff80008ad66a78>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
hardirqs last disabled at (6182794): [<ffff80008ad66a78>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
softirqs last enabled at (6182792): [<ffff80008aab71c4>] spin_unlock_bh include/linux/spinlock.h:396 [inline]
softirqs last enabled at (6182792): [<ffff80008aab71c4>] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287
softirqs last disabled at (6182790): [<ffff80008aab61dc>] spin_lock_bh include/linux/spinlock.h:356 [inline]
softirqs last disabled at (6182790): [<ffff80008aab61dc>] batadv_purge_orig_ref+0x164/0x1228 net/batman-adv/originator.c:1271
CPU: 0 PID: 621 Comm: kworker/u4:6 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Workqueue: bat_events batadv_purge_orig
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : should_resched arch/arm64/include/asm/preempt.h:79 [inline]
pc : __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:388
lr : __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386
sp : ffff800099007970
x29: ffff800099007980 x28: 1fffe00018fce1bd x27: dfff800000000000
x26: ffff0000d2620008 x25: ffff0000c7e70de8 x24: 0000000000000001
x23: 1fffe00018e57781 x22: dfff800000000000 x21: ffff80008aab71c4
x20: ffff0001b40136c0 x19: ffff0000c72bbc08 x18: 1fffe0001a817bb0
x17: ffff800125414000 x16: ffff80008032116c x15: 0000000000000001
x14: 1fffe0001ee9d610 x13: 0000000000000000 x12: 0000000000000003
x11: 0000000000000000 x10: 0000000000ff0100 x9 : 0000000000000000
x8 : 00000000005e5789 x7 : ffff80008aab61dc x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000000006 x1 : 0000000000000080 x0 : ffff800125414000
Call trace:
__daif_local_irq_enable arch/arm64/include/asm/irqflags.h:27 [inline]
arch_local_irq_enable arch/arm64/include/asm/irqflags.h:49 [inline]
__local_bh_enable_ip+0x228/0x44c kernel/softirq.c:386
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x3c/0x4c kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287
batadv_purge_orig+0x20/0x70 net/batman-adv/originator.c:1300
process_one_work+0x694/0x1204 kernel/workqueue.c:2633
process_scheduled_works kernel/workqueue.c:2706 [inline]
worker_thread+0x938/0xef4 kernel/workqueue.c:2787
kthread+0x288/0x310 kernel/kthread.c:388
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:51
lr : default_idle_call+0xf8/0x128 kernel/sched/idle.c:103
sp : ffff800093a17d30
x29: ffff800093a17d30 x28: dfff800000000000 x27: 1ffff00012742fb4
x26: ffff80008ec9d000 x25: 0000000000000000 x24: 0000000000000002
x23: 1ffff00011d93a74 x22: ffff80008ec9d3a0 x21: 0000000000000000
x20: ffff0000c19dbc00 x19: ffff8000802d0fd8 x18: 1fffe00036804396
x17: ffff80008ec9d000 x16: ffff8000802d089c x15: 0000000000000001
x14: 1fffe00036805f10 x13: 0000000000000000 x12: 0000000000000003
x11: 0000000000000001 x10: 0000000000000003 x9 : 0000000000000000
x8 : 00000000000ce8d1 x7 : ffff8000804609e4 x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff80008ad6aac0
x2 : 0000000000000000 x1 : ffff80008aedea60 x0 : ffff800125436000
Call trace:
__daif_local_irq_enable arch/arm64/include/asm/irqflags.h:27 [inline]
arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:49
cpuidle_idle_call kernel/sched/idle.c:170 [inline]
do_idle+0x1f0/0x4e8 kernel/sched/idle.c:312
cpu_startup_entry+0x5c/0x74 kernel/sched/idle.c:410
secondary_start_kernel+0x198/0x1c0 arch/arm64/kernel/smp.c:272
__secondary_switched+0xb8/0xbc arch/arm64/kernel/head.S:404
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Justin Stitt <justinstitt@google.com>
Date: Tue May 7 03:53:49 2024 +0000
block/ioctl: prefer different overflow check
[ Upstream commit ccb326b5f9e623eb7f130fbbf2505ec0e2dcaff9 ]
Running syzkaller with the newly reintroduced signed integer overflow
sanitizer shows this report:
[ 62.982337] ------------[ cut here ]------------
[ 62.985692] cgroup: Invalid name
[ 62.986211] UBSAN: signed-integer-overflow in ../block/ioctl.c:36:46
[ 62.989370] 9pnet_fd: p9_fd_create_tcp (7343): problem connecting socket to 127.0.0.1
[ 62.992992] 9223372036854775807 + 4095 cannot be represented in type 'long long'
[ 62.997827] 9pnet_fd: p9_fd_create_tcp (7345): problem connecting socket to 127.0.0.1
[ 62.999369] random: crng reseeded on system resumption
[ 63.000634] GUP no longer grows the stack in syz-executor.2 (7353): 20002000-20003000 (20001000)
[ 63.000668] CPU: 0 PID: 7353 Comm: syz-executor.2 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1
[ 63.000677] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 63.000682] Call Trace:
[ 63.000686] <TASK>
[ 63.000731] dump_stack_lvl+0x93/0xd0
[ 63.000919] __get_user_pages+0x903/0xd30
[ 63.001030] __gup_longterm_locked+0x153e/0x1ba0
[ 63.001041] ? _raw_read_unlock_irqrestore+0x17/0x50
[ 63.001072] ? try_get_folio+0x29c/0x2d0
[ 63.001083] internal_get_user_pages_fast+0x1119/0x1530
[ 63.001109] iov_iter_extract_pages+0x23b/0x580
[ 63.001206] bio_iov_iter_get_pages+0x4de/0x1220
[ 63.001235] iomap_dio_bio_iter+0x9b6/0x1410
[ 63.001297] __iomap_dio_rw+0xab4/0x1810
[ 63.001316] iomap_dio_rw+0x45/0xa0
[ 63.001328] ext4_file_write_iter+0xdde/0x1390
[ 63.001372] vfs_write+0x599/0xbd0
[ 63.001394] ksys_write+0xc8/0x190
[ 63.001403] do_syscall_64+0xd4/0x1b0
[ 63.001421] ? arch_exit_to_user_mode_prepare+0x3a/0x60
[ 63.001479] entry_SYSCALL_64_after_hwframe+0x6f/0x77
[ 63.001535] RIP: 0033:0x7f7fd3ebf539
[ 63.001551] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[ 63.001562] RSP: 002b:00007f7fd32570c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 63.001584] RAX: ffffffffffffffda RBX: 00007f7fd3ff3f80 RCX: 00007f7fd3ebf539
[ 63.001590] RDX: 4db6d1e4f7e43360 RSI: 0000000020000000 RDI: 0000000000000004
[ 63.001595] RBP: 00007f7fd3f1e496 R08: 0000000000000000 R09: 0000000000000000
[ 63.001599] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 63.001604] R13: 0000000000000006 R14: 00007f7fd3ff3f80 R15: 00007ffd415ad2b8
...
[ 63.018142] ---[ end trace ]---
Historically, the signed integer overflow sanitizer did not work in the
kernel due to its interaction with `-fwrapv` but this has since been
changed [1] in the newest version of Clang; It was re-enabled in the
kernel with Commit 557f8c582a9ba8ab ("ubsan: Reintroduce signed overflow
sanitizer").
Let's rework this overflow checking logic to not actually perform an
overflow during the check itself, thus avoiding the UBSAN splat.
[1]: https://github.com/llvm/llvm-project/pull/82432
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240507-b4-sio-block-ioctl-v3-1-ba0c2b32275e@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uri Arev <me@wantyapps.xyz>
Date: Sat Apr 6 00:42:24 2024 +0300
Bluetooth: ath3k: Fix multiple issues reported by checkpatch.pl
[ Upstream commit 68aa21054ec3a1a313af90a5f95ade16c3326d20 ]
This fixes some CHECKs reported by the checkpatch script.
Issues reported in ath3k.c:
-------
ath3k.c
-------
CHECK: Please don't use multiple blank lines
+
+
CHECK: Blank lines aren't necessary after an open brace '{'
+static const struct usb_device_id ath3k_blist_tbl[] = {
+
CHECK: Alignment should match open parenthesis
+static int ath3k_load_firmware(struct usb_device *udev,
+ const struct firmware *firmware)
CHECK: Alignment should match open parenthesis
+ err = usb_bulk_msg(udev, pipe, send_buf, size,
+ &len, 3000);
CHECK: Unnecessary parentheses around 'len != size'
+ if (err || (len != size)) {
CHECK: Alignment should match open parenthesis
+static int ath3k_get_version(struct usb_device *udev,
+ struct ath3k_version *version)
CHECK: Alignment should match open parenthesis
+static int ath3k_load_fwfile(struct usb_device *udev,
+ const struct firmware *firmware)
CHECK: Alignment should match open parenthesis
+ err = usb_bulk_msg(udev, pipe, send_buf, size,
+ &len, 3000);
CHECK: Unnecessary parentheses around 'len != size'
+ if (err || (len != size)) {
CHECK: Blank lines aren't necessary after an open brace '{'
+ switch (fw_version.ref_clock) {
+
CHECK: Alignment should match open parenthesis
+ snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
+ le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
CHECK: Alignment should match open parenthesis
+static int ath3k_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
CHECK: Alignment should match open parenthesis
+ BT_ERR("Firmware file \"%s\" not found",
+ ATH3K_FIRMWARE);
CHECK: Alignment should match open parenthesis
+ BT_ERR("Firmware file \"%s\" request failed (err=%d)",
+ ATH3K_FIRMWARE, ret);
total: 0 errors, 0 warnings, 14 checks, 540 lines checked
Signed-off-by: Uri Arev <me@wantyapps.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pavan Chebbi <pavan.chebbi@broadcom.com>
Date: Tue Jun 18 14:53:13 2024 -0700
bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
[ Upstream commit 1e7962114c10957fe4d10a15eb714578a394e90b ]
The current code only restores PTP tx_avail count when we get DMA
mapping errors. Fix it so that the PTP tx_avail count will be
restored for both DMA mapping errors and skb_pad() errors.
Otherwise PTP TX timestamp will not be available after a PTP
packet hits the skb_pad() error.
Fixes: 83bb623c968e ("bnxt_en: Transmit and retrieve packet timestamps")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240618215313.29631-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexei Starovoitov <ast@kernel.org>
Date: Fri Mar 29 10:14:39 2024 -0700
bpf: Avoid kfree_rcu() under lock in bpf_lpm_trie.
[ Upstream commit 59f2f841179aa6a0899cb9cf53659149a35749b7 ]
syzbot reported the following lock sequence:
cpu 2:
grabs timer_base lock
spins on bpf_lpm lock
cpu 1:
grab rcu krcp lock
spins on timer_base lock
cpu 0:
grab bpf_lpm lock
spins on rcu krcp lock
bpf_lpm lock can be the same.
timer_base lock can also be the same due to timer migration.
but rcu krcp lock is always per-cpu, so it cannot be the same lock.
Hence it's a false positive.
To avoid lockdep complaining move kfree_rcu() after spin_unlock.
Reported-by: syzbot+1fa663a2100308ab6eab@syzkaller.appspotmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240329171439.37813-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Fri Jun 14 12:17:33 2024 +0200
bpf: Avoid splat in pskb_pull_reason
[ Upstream commit 2bbe3e5a2f4ef69d13be54f1cf895b4658287080 ]
syzkaller builds (CONFIG_DEBUG_NET=y) frequently trigger a debug
hint in pskb_may_pull.
We'd like to retain this debug check because it might hint at integer
overflows and other issues (kernel code should pull headers, not huge
value).
In bpf case, this splat isn't interesting at all: such (nonsensical)
bpf programs are typically generated by a fuzzer anyway.
Do what Eric suggested and suppress such warning.
For CONFIG_DEBUG_NET=n we don't need the extra check because
pskb_may_pull will do the right thing: return an error without the
WARN() backtrace.
Fixes: 219eee9c0d16 ("net: skbuff: add overflow debug check to pull/push helpers")
Reported-by: syzbot+0c4150bff9fff3bf023c@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=0c4150bff9fff3bf023c
Link: https://lore.kernel.org/netdev/9f254c96-54f2-4457-b7ab-1d9f6187939c@gmail.com/
Link: https://lore.kernel.org/bpf/20240614101801.9496-1-fw@strlen.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jose E. Marchesi <jose.marchesi@oracle.com>
Date: Tue May 7 20:47:56 2024 +0200
bpf: avoid uninitialized warnings in verifier_global_subprogs.c
[ Upstream commit cd3fc3b9782130a5bc1dc3dfccffbc1657637a93 ]
[Changes from V1:
- The warning to disable is -Wmaybe-uninitialized, not -Wuninitialized.
- This warning is only supported in GCC.]
The BPF selftest verifier_global_subprogs.c contains code that
purposedly performs out of bounds access to memory, to check whether
the kernel verifier is able to catch them. For example:
__noinline int global_unsupp(const int *mem)
{
if (!mem)
return 0;
return mem[100]; /* BOOM */
}
With -O1 and higher and no inlining, GCC notices this fact and emits a
"maybe uninitialized" warning. This is by design. Note that the
emission of these warnings is highly dependent on the precise
optimizations that are performed.
This patch adds a compiler pragma to verifier_global_subprogs.c to
ignore these warnings.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Cc: david.faust@oracle.com
Cc: cupertino.miranda@oracle.com
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240507184756.1772-1-jose.marchesi@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Borkmann <daniel@iogearbox.net>
Date: Thu Jun 13 13:53:08 2024 +0200
bpf: Fix reg_set_min_max corruption of fake_reg
[ Upstream commit 92424801261d1564a0bb759da3cf3ccd69fdf5a2 ]
Juan reported that after doing some changes to buzzer [0] and implementing
a new fuzzing strategy guided by coverage, they noticed the following in
one of the probes:
[...]
13: (79) r6 = *(u64 *)(r0 +0) ; R0=map_value(ks=4,vs=8) R6_w=scalar()
14: (b7) r0 = 0 ; R0_w=0
15: (b4) w0 = -1 ; R0_w=0xffffffff
16: (74) w0 >>= 1 ; R0_w=0x7fffffff
17: (5c) w6 &= w0 ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff))
18: (44) w6 |= 2 ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd))
19: (56) if w6 != 0x7ffffffd goto pc+1
REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0)
19: R6_w=0x7fffffff
20: (95) exit
from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
21: (14) w6 -= 2147483632 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd))
22: (76) if w6 s>= 0xe goto pc+1 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd))
23: (95) exit
from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
24: (14) w6 -= 14 ; R6_w=0
[...]
What can be seen here is a register invariant violation on line 19. After
the binary-or in line 18, the verifier knows that bit 2 is set but knows
nothing about the rest of the content which was loaded from a map value,
meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in
line 19 the verifier analyzes the branch, it splits the register states
in reg_set_min_max() into the registers of the true branch (true_reg1,
true_reg2) and the registers of the false branch (false_reg1, false_reg2).
Since the test is w6 != 0x7ffffffd, the src_reg is a known constant.
Internally, the verifier creates a "fake" register initialized as scalar
to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now,
for line 19, it is mathematically impossible to take the false branch of
this program, yet the verifier analyzes it. It is impossible because the
second bit of r6 will be set due to the prior or operation and the
constant in the condition has that bit unset (hex(fd) == binary(1111 1101).
When the verifier first analyzes the false / fall-through branch, it will
compute an intersection between the var_off of r6 and of the constant. This
is because the verifier creates a "fake" register initialized to the value
of the constant. The intersection result later refines both registers in
regs_refine_cond_op():
[...]
t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off));
reg1->var_off = tnum_with_subreg(reg1->var_off, t);
reg2->var_off = tnum_with_subreg(reg2->var_off, t);
[...]
Since the verifier is analyzing the false branch of the conditional jump,
reg1 is equal to false_reg1 and reg2 is equal to false_reg2, i.e. the reg2
is the "fake" register that was meant to hold a constant value. The resulting
var_off of the intersection says that both registers now hold a known value
of var_off=(0x7fffffff, 0x0) or in other words: this operation manages to
make the verifier think that the "constant" value that was passed in the
jump operation now holds a different value.
Normally this would not be an issue since it should not influence the true
branch, however, false_reg2 and true_reg2 are pointers to the same "fake"
register. Meaning, the false branch can influence the results of the true
branch. In line 24, the verifier assumes R6_w=0, but the actual runtime
value in this case is 1. The fix is simply not passing in the same "fake"
register location as inputs to reg_set_min_max(), but instead making a
copy. Moving the fake_reg into the env also reduces stack consumption by
120 bytes. With this, the verifier successfully rejects invalid accesses
from the test program.
[0] https://github.com/google/buzzer
Fixes: 67420501e868 ("bpf: generalize reg_set_min_max() to handle non-const register comparisons")
Reported-by: Juan José López Jaimez <jjlopezjaimez@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240613115310.25383-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Boris Burkov <boris@bur.io>
Date: Fri Jun 7 12:50:14 2024 -0700
btrfs: retry block group reclaim without infinite loop
commit 4eb4e85c4f818491efc67e9373aa16b123c3f522 upstream.
If inc_block_group_ro systematically fails (e.g. due to ETXTBUSY from
swap) or btrfs_relocate_chunk systematically fails (from lack of
space), then this worker becomes an infinite loop.
At the very least, this strands the cleaner thread, but can also result
in hung tasks/RCU stalls on PREEMPT_NONE kernels and if the
reclaim_bgs_lock mutex is not contended.
I believe the best long term fix is to manage reclaim via work queue,
where we queue up a relocation on the triggering condition and re-queue
on failure. In the meantime, this is an easy fix to apply to avoid the
immediate pain.
Fixes: 7e2718099438 ("btrfs: reinsert BGs failed to reclaim")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Date: Fri Jun 7 13:27:48 2024 +0200
btrfs: zoned: allocate dummy checksums for zoned NODATASUM writes
[ Upstream commit cebae292e0c32a228e8f2219c270a7237be24a6a ]
Shin'ichiro reported that when he's running fstests' test-case
btrfs/167 on emulated zoned devices, he's seeing the following NULL
pointer dereference in 'btrfs_zone_finish_endio()':
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000011: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
CPU: 4 PID: 2332440 Comm: kworker/u80:15 Tainted: G W 6.10.0-rc2-kts+ #4
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
RSP: 0018:ffff88867f107a90 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff893e5534
RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088
RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed1081696028
R10: ffff88840b4b0143 R11: ffff88834dfff600 R12: ffff88840b4b0000
R13: 0000000000020000 R14: 0000000000000000 R15: ffff888530ad5210
FS: 0000000000000000(0000) GS:ffff888e3f800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f87223fff38 CR3: 00000007a7c6a002 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? die_addr+0x46/0x70
? exc_general_protection+0x14f/0x250
? asm_exc_general_protection+0x26/0x30
? do_raw_read_unlock+0x44/0x70
? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
btrfs_finish_one_ordered+0x5d9/0x19a0 [btrfs]
? __pfx_lock_release+0x10/0x10
? do_raw_write_lock+0x90/0x260
? __pfx_do_raw_write_lock+0x10/0x10
? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs]
? _raw_write_unlock+0x23/0x40
? btrfs_finish_ordered_zoned+0x5a9/0x850 [btrfs]
? lock_acquire+0x435/0x500
btrfs_work_helper+0x1b1/0xa70 [btrfs]
? __schedule+0x10a8/0x60b0
? __pfx___might_resched+0x10/0x10
process_one_work+0x862/0x1410
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? assign_work+0x16c/0x240
worker_thread+0x5e6/0x1010
? __pfx_worker_thread+0x10/0x10
kthread+0x2c3/0x3a0
? trace_irq_enable.constprop.0+0xce/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Enabling CONFIG_BTRFS_ASSERT revealed the following assertion to
trigger:
assertion failed: !list_empty(&ordered->list), in fs/btrfs/zoned.c:1815
This indicates, that we're missing the checksums list on the
ordered_extent. As btrfs/167 is doing a NOCOW write this is to be
expected.
Further analysis with drgn confirmed the assumption:
>>> inode = prog.crashed_thread().stack_trace()[11]['ordered'].inode
>>> btrfs_inode = drgn.container_of(inode, "struct btrfs_inode", \
"vfs_inode")
>>> print(btrfs_inode.flags)
(u32)1
As zoned emulation mode simulates conventional zones on regular devices,
we cannot use zone-append for writing. But we're only attaching dummy
checksums if we're doing a zone-append write.
So for NOCOW zoned data writes on conventional zones, also attach a
dummy checksum.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: cbfce4c7fbde ("btrfs: optimize the logical to physical mapping for zoned writes")
CC: Naohiro Aota <Naohiro.Aota@wdc.com> # 6.6+
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Waiman Long <longman@redhat.com>
Date: Thu Apr 4 09:47:48 2024 -0400
cgroup/cpuset: Make cpuset hotplug processing synchronous
[ Upstream commit 2125c0034c5dfd61171b494bd309bb7637bff6eb ]
Since commit 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside
get_online_cpus()"), cpuset hotplug was done asynchronously via a work
function. This is to avoid recursive locking of cgroup_mutex.
Since then, the cgroup locking scheme has changed quite a bit. A
cpuset_mutex was introduced to protect cpuset specific operations.
The cpuset_mutex is then replaced by a cpuset_rwsem. With commit
d74b27d63a8b ("cgroup/cpuset: Change cpuset_rwsem and hotplug lock
order"), cpu_hotplug_lock is acquired before cpuset_rwsem. Later on,
cpuset_rwsem is reverted back to cpuset_mutex. All these locking changes
allow the hotplug code to call into cpuset core directly.
The following commits were also merged due to the asynchronous nature
of cpuset hotplug processing.
- commit b22afcdf04c9 ("cpu/hotplug: Cure the cpusets trainwreck")
- commit 50e76632339d ("sched/cpuset/pm: Fix cpuset vs. suspend-resume
bugs")
- commit 28b89b9e6f7b ("cpuset: handle race between CPU hotplug and
cpuset_hotplug_work")
Clean up all these bandages by making cpuset hotplug
processing synchronous again with the exception that the call to
cgroup_transfer_tasks() to transfer tasks out of an empty cgroup v1
cpuset, if necessary, will still be done via a work function due to the
existing cgroup_mutex -> cpu_hotplug_lock dependency. It is possible
to reverse that dependency, but that will require updating a number of
different cgroup controllers. This special hotplug code path should be
rarely taken anyway.
As all the cpuset states will be updated by the end of the hotplug
operation, we can revert most the above commits except commit
50e76632339d ("sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs")
which is partially reverted. Also removing some cpus_read_lock trylock
attempts in the cpuset partition code as they are no longer necessary
since the cpu_hotplug_lock is now held for the whole duration of the
cpuset hotplug code path.
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Steve French <stfrench@microsoft.com>
Date: Wed Jun 19 14:46:48 2024 -0500
cifs: fix typo in module parameter enable_gcm_256
commit 8bf0287528da1992c5e49d757b99ad6bbc34b522 upstream.
enable_gcm_256 (which allows the server to require the strongest
encryption) is enabled by default, but the modinfo description
incorrectly showed it disabled by default. Fix the typo.
Cc: stable@vger.kernel.org
Fixes: fee742b50289 ("smb3.1.1: enable negotiating stronger encryption by default")
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ondrej Mosnacek <omosnace@redhat.com>
Date: Fri Jun 7 18:07:52 2024 +0200
cipso: fix total option length computation
[ Upstream commit 9f36169912331fa035d7b73a91252d7c2512eb1a ]
As evident from the definition of ip_options_get(), the IP option
IPOPT_END is used to pad the IP option data array, not IPOPT_NOP. Yet
the loop that walks the IP options to determine the total IP options
length in cipso_v4_delopt() doesn't take IPOPT_END into account.
Fix it by recognizing the IPOPT_END value as the end of actual options.
Fixes: 014ab19a69c3 ("selinux: Set socket NetLabel based on connection endpoint")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adrian Hunter <adrian.hunter@intel.com>
Date: Mon Mar 25 08:40:23 2024 +0200
clocksource: Make watchdog and suspend-timing multiplication overflow safe
[ Upstream commit d0304569fb019d1bcfbbbce1ce6df6b96f04079b ]
Kernel timekeeping is designed to keep the change in cycles (since the last
timer interrupt) below max_cycles, which prevents multiplication overflow
when converting cycles to nanoseconds. However, if timer interrupts stop,
the clocksource_cyc2ns() calculation will eventually overflow.
Add protection against that. Simplify by folding together
clocksource_delta() and clocksource_cyc2ns() into cycles_to_nsec_safe().
Check against max_cycles, falling back to a slower higher precision
calculation.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240325064023.2997-20-adrian.hunter@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peng Ma <andypma@tencent.com>
Date: Thu May 16 14:30:42 2024 +0800
cpufreq: amd-pstate: fix memory leak on CPU EPP exit
[ Upstream commit cea04f3d9aeebda9d9c063c0dfa71e739c322c81 ]
The cpudata memory from kzalloc() in amd_pstate_epp_cpu_init() is
not freed in the analogous exit function, so fix that.
Signed-off-by: Peng Ma <andypma@tencent.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chenghai Huang <huangchenghai2@huawei.com>
Date: Sun Apr 7 16:00:00 2024 +0800
crypto: hisilicon/qm - Add the err memory release process to qm uninit
[ Upstream commit c9ccfd5e0ff0dd929ce86d1b5f3c6a414110947a ]
When the qm uninit command is executed, the err data needs to
be released to prevent memory leakage. The error information
release operation and uacce_remove are integrated in
qm_remove_uacce.
So add the qm_remove_uacce to qm uninit to avoid err memory
leakage.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chenghai Huang <huangchenghai2@huawei.com>
Date: Sun Apr 7 15:59:58 2024 +0800
crypto: hisilicon/sec - Fix memory leak for sec resource release
[ Upstream commit bba4250757b4ae1680fea435a358d8093f254094 ]
The AIV is one of the SEC resources. When releasing resources,
it need to release the AIV resources at the same time.
Otherwise, memory leakage occurs.
The aiv resource release is added to the sec resource release
function.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Jiang <dave.jiang@intel.com>
Date: Thu May 2 09:57:34 2024 -0700
cxl: Add post-reset warning if reset results in loss of previously committed HDM decoders
[ Upstream commit 934edcd436dca0447e0d3691a908394ba16d06c3 ]
Secondary Bus Reset (SBR) is equivalent to a device being hot removed and
inserted again. Doing a SBR on a CXL type 3 device is problematic if the
exported device memory is part of system memory that cannot be offlined.
The event is equivalent to violently ripping out that range of memory from
the kernel. While the hardware requires the "Unmask SBR" bit set in the
Port Control Extensions register and the kernel currently does not unmask
it, user can unmask this bit via setpci or similar tool.
The driver does not have a way to detect whether a reset coming from the
PCI subsystem is a Function Level Reset (FLR) or SBR. The only way to
detect is to note if a decoder is marked as enabled in software but the
decoder control register indicates it's not committed.
Add a helper function to find discrepancy between the decoder software
state versus the hardware register state.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240502165851.1948523-6-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jian Wen <wenjianhn@gmail.com>
Date: Wed Mar 27 16:21:28 2024 +0800
devlink: use kvzalloc() to allocate devlink instance resources
[ Upstream commit 730fffce4fd2eb7a0be2d0b6cd7e55e9194d76d5 ]
During live migration of a virtual machine, the SR-IOV VF need to be
re-registered. It may fail when the memory is badly fragmented.
The related log is as follows.
kernel: hv_netvsc 6045bdaa-c0d1-6045-bdaa-c0d16045bdaa eth0: VF slot 1 added
...
kernel: kworker/0:0: page allocation failure: order:7, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0
kernel: CPU: 0 PID: 24006 Comm: kworker/0:0 Tainted: G E 5.4...x86_64 #1
kernel: Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090008 12/07/2018
kernel: Workqueue: events work_for_cpu_fn
kernel: Call Trace:
kernel: dump_stack+0x8b/0xc8
kernel: warn_alloc+0xff/0x170
kernel: __alloc_pages_slowpath+0x92c/0xb2b
kernel: ? get_page_from_freelist+0x1d4/0x1140
kernel: __alloc_pages_nodemask+0x2f9/0x320
kernel: alloc_pages_current+0x6a/0xb0
kernel: kmalloc_order+0x1e/0x70
kernel: kmalloc_order_trace+0x26/0xb0
kernel: ? __switch_to_asm+0x34/0x70
kernel: __kmalloc+0x276/0x280
kernel: ? _raw_spin_unlock_irqrestore+0x1e/0x40
kernel: devlink_alloc+0x29/0x110
kernel: mlx5_devlink_alloc+0x1a/0x20 [mlx5_core]
kernel: init_one+0x1d/0x650 [mlx5_core]
kernel: local_pci_probe+0x46/0x90
kernel: work_for_cpu_fn+0x1a/0x30
kernel: process_one_work+0x16d/0x390
kernel: worker_thread+0x1d3/0x3f0
kernel: kthread+0x105/0x140
kernel: ? max_active_store+0x80/0x80
kernel: ? kthread_bind+0x20/0x20
kernel: ret_from_fork+0x3a/0x50
Signed-off-by: Jian Wen <wenjian1@xiaomi.com>
Link: https://lore.kernel.org/r/20240327082128.942818-1-wenjian1@xiaomi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnd Bergmann <arnd@arndb.de>
Date: Tue May 28 13:54:22 2024 +0200
dmaengine: fsl-edma: avoid linking both modules
[ Upstream commit fa555b5026d0bf1ba7c9e645ff75e2725a982631 ]
Kbuild does not support having a source file compiled multiple times
and linked into distinct modules, or built-in and modular at the
same time. For fs-edma, there are two common components that are
linked into the fsl-edma.ko for Arm and PowerPC, plus the mcf-edma.ko
module on Coldfire. This violates the rule for compile-testing:
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-common.o is added to multiple modules: fsl-edma mcf-edma
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-trace.o is added to multiple modules: fsl-edma mcf-edma
I tried splitting out the common parts into a separate modules, but
that adds back the complexity that a cleanup patch removed, and it
gets harder with the addition of the tracepoints.
As a minimal workaround, address it at the Kconfig level, by disallowing
the broken configurations.
Link: https://lore.kernel.org/lkml/20240110232255.1099757-1-arnd@kernel.org/
Fixes: 66aac8ea0a6c ("dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240528115440.2965975-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Li RongQing <lirongqing@baidu.com>
Date: Mon Jun 3 09:24:44 2024 +0800
dmaengine: idxd: Fix possible Use-After-Free in irq_process_work_list
[ Upstream commit e3215deca4520773cd2b155bed164c12365149a7 ]
Use list_for_each_entry_safe() to allow iterating through the list and
deleting the entry in the iteration process. The descriptor is freed via
idxd_desc_complete() and there's a slight chance may cause issue for
the list iterator when the descriptor is reused by another thread
without it being deleted from the list.
Fixes: 16e19e11228b ("dmaengine: idxd: Fix list corruption in description completion")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20240603012444.11902-1-lirongqing@baidu.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikita Shubin <n.shubin@yadro.com>
Date: Tue May 28 09:09:24 2024 +0300
dmaengine: ioatdma: Fix error path in ioat3_dma_probe()
[ Upstream commit f0dc9fda2e0ee9e01496c2f5aca3a831131fad79 ]
Make sure we are disabling interrupts and destroying DMA pool if
pcie_capability_read/write_word() call failed.
Fixes: 511deae0261c ("dmaengine: ioatdma: disable relaxed ordering for ioatdma")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240528-ioatdma-fixes-v2-2-a9f2fbe26ab1@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikita Shubin <n.shubin@yadro.com>
Date: Tue May 28 09:09:25 2024 +0300
dmaengine: ioatdma: Fix kmemleak in ioat_pci_probe()
[ Upstream commit 29b7cd255f3628e0d65be33a939d8b5bba10aa62 ]
If probing fails we end up with leaking ioatdma_device and each
allocated channel.
Following kmemleak easy to reproduce by injecting an error in
ioat_alloc_chan_resources() when doing ioat_dma_self_test().
unreferenced object 0xffff888014ad5800 (size 1024): [..]
[<ffffffff827692ca>] kmemleak_alloc+0x4a/0x80
[<ffffffff81430600>] kmalloc_trace+0x270/0x2f0
[<ffffffffa000b7d1>] ioat_pci_probe+0xc1/0x1c0 [ioatdma]
[..]
repeated for each ioatdma channel:
unreferenced object 0xffff8880148e5c00 (size 512): [..]
[<ffffffff827692ca>] kmemleak_alloc+0x4a/0x80
[<ffffffff81430600>] kmalloc_trace+0x270/0x2f0
[<ffffffffa0009641>] ioat_enumerate_channels+0x101/0x2d0 [ioatdma]
[<ffffffffa000b266>] ioat3_dma_probe+0x4d6/0x970 [ioatdma]
[<ffffffffa000b891>] ioat_pci_probe+0x181/0x1c0 [ioatdma]
[..]
Fixes: bf453a0a18b2 ("dmaengine: ioat: Support in-use unbind")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240528-ioatdma-fixes-v2-3-a9f2fbe26ab1@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikita Shubin <n.shubin@yadro.com>
Date: Tue May 28 09:09:23 2024 +0300
dmaengine: ioatdma: Fix leaking on version mismatch
[ Upstream commit 1b11b4ef6bd68591dcaf8423c7d05e794e6aec6f ]
Fix leaking ioatdma_device if I/OAT version is less than IOAT_VER_3_0.
Fixes: bf453a0a18b2 ("dmaengine: ioat: Support in-use unbind")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240528-ioatdma-fixes-v2-1-a9f2fbe26ab1@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikita Shubin <n.shubin@yadro.com>
Date: Tue May 14 13:52:31 2024 +0300
dmaengine: ioatdma: Fix missing kmem_cache_destroy()
[ Upstream commit 5422145d0b749ad554ada772133b9b20f9fb0ec8 ]
Fix missing kmem_cache_destroy() for ioat_sed_cache in
ioat_exit_module().
Noticed via:
```
modprobe ioatdma
rmmod ioatdma
modprobe ioatdma
debugfs: Directory 'ioat_sed_ent' with parent 'slab' already present!
```
Fixes: c0f28ce66ecf ("dmaengine: ioatdma: move all the init routines")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240514-ioatdma_fixes-v1-1-2776a0913254@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Siddharth Vadapalli <s-vadapalli@ti.com>
Date: Sun Jun 2 07:03:19 2024 +0530
dmaengine: ti: k3-udma-glue: Fix of_k3_udma_glue_parse_chn_by_id()
[ Upstream commit ba27e9d2207784da748b19170a2e56bd7770bd81 ]
The of_k3_udma_glue_parse_chn_by_id() helper function erroneously
invokes "of_node_put()" on the "udmax_np" device-node passed to it,
without having incremented its reference count at any point. Fix it.
Fixes: 81a1f90f20af ("dmaengine: ti: k3-udma-glue: Add function to parse channel by ID")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Peter Ujfalusi@gmail.com
Link: https://lore.kernel.org/r/20240602013319.2975894-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Louis Chauvet <louis.chauvet@bootlin.com>
Date: Fri Jun 7 10:34:38 2024 +0200
dmaengine: xilinx: xdma: Fix data synchronisation in xdma_channel_isr()
commit 462237d2d93fc9e9221d1cf9f773954d27da83c0 upstream.
Requests the vchan lock before using xdma->stop_request.
Fixes: 6a40fb824596 ("dmaengine: xilinx: xdma: Fix synchronization issue")
Cc: stable@vger.kernel.org
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20240607-xdma-fixes-v2-1-0282319ce345@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michael Strauss <michael.strauss@amd.com>
Date: Tue May 7 12:03:15 2024 -0400
drm/amd/display: Attempt to avoid empty TUs when endpoint is DPIA
commit c03d770c0b014a3007a5874bf6b3c3e64d32aaac upstream.
[WHY]
Empty SST TUs are illegal to transmit over a USB4 DP tunnel.
Current policy is to configure stream encoder to pack 2 pixels per pclk
even when ODM combine is not in use, allowing seamless dynamic ODM
reconfiguration. However, in extreme edge cases where average pixel
count per TU is less than 2, this can lead to unexpected empty TU
generation during compliance testing. For example, VIC 1 with a 1xHBR3
link configuration will average 1.98 pix/TU.
[HOW]
Calculate average pixel count per TU, and block 2 pixels per clock if
endpoint is a DPIA tunnel and pixel clock is low enough that we will
never require 2:1 ODM combine.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Date: Mon Feb 12 16:51:59 2024 -0500
drm/amd/display: Exit idle optimizations before HDCP execution
[ Upstream commit f30a3bea92bdab398531129d187629fb1d28f598 ]
[WHY]
PSP can access DCN registers during command submission and we need
to ensure that DCN is not in PG before doing so.
[HOW]
Add a callback to DM to lock and notify DC for idle optimization exit.
It can't be DC directly because of a potential race condition with the
link protection thread and the rest of DM operation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Roman Li <roman.li@amd.com>
Date: Tue May 7 16:26:08 2024 -0400
drm/amd/display: Remove redundant idle optimization check
commit e2654a4453ba3dac9baacf9980d841d84e15b869 upstream.
[Why]
Disable idle optimization for each atomic commit is unnecessary,
and can lead to a potential race condition.
[How]
Remove idle optimization check from amdgpu_dm_atomic_commit_tail()
Fixes: 196107eb1e15 ("drm/amd/display: Add IPS checks before dcn register access")
Cc: stable@vger.kernel.org
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Martin Leung <martin.leung@amd.com>
Date: Mon Feb 26 13:20:08 2024 -0500
drm/amd/display: revert Exit idle optimizations before HDCP execution
commit f2703a3596a279b0be6eeed4c500bdbaa8dc3ce4 upstream.
why and how:
causes black screen on PNP on DCN 3.5
This reverts commit f30a3bea92bd ("drm/amd/display: Exit idle
optimizations before HDCP execution")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Date: Thu Feb 22 16:52:40 2024 -0500
drm/amd/display: Workaround register access in idle race with cursor
[ Upstream commit b5b6d6251579a29dafdad25f4bc7f3ff7bfd2c86 ]
[Why]
Cursor update can be pre-empted by a request for setting target flip
submission.
This causes an issue where we're in the middle of the exit sequence
trying to log to DM, but the pre-emption starts another DMCUB
command submission that requires being out of idle.
The DC lock aqusition can fail, and depending on the DM/OS interface
it's possible that the function inserted into this thread must not fail.
This means that lock aqusition must be skipped and exit *must* occur.
[How]
Modify when we consider idle as active. Consider it exited only once
the exit has fully finished.
Consider it as entered prior to actual notification.
Since we're on the same core/thread the cached values are coherent
and we'll see that we still need to exit. Once the cursor update resumes
it'll continue doing the double exit but this won't cause a functional
issue, just a (potential) redundant operation.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunxiang Li <Yunxiang.Li@amd.com>
Date: Thu May 23 07:48:19 2024 -0400
drm/amdgpu: fix locking scope when flushing tlb
commit 84801d4f1e4fbd2c44dddecaec9099bdff100a42 upstream.
Which method is used to flush tlb does not depend on whether a reset is
in progress or not. We should skip flush altogether if the GPU will get
reset. So put both path under reset_domain read lock.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alex Deucher <alexander.deucher@amd.com>
Date: Mon May 20 09:05:21 2024 -0400
drm/amdgpu: fix UBSAN warning in kv_dpm.c
commit f0d576f840153392d04b2d52cf3adab8f62e8cb6 upstream.
Adds bounds check for sumo_vid_mapping_entry.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3392
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jani Nikula <jani.nikula@intel.com>
Date: Fri Jun 14 17:23:11 2024 +0300
drm/i915/mso: using joiner is not possible with eDP MSO
commit 49cc17967be95d64606d5684416ee51eec35e84a upstream.
It's not possible to use the joiner at the same time with eDP MSO. When
a panel needs MSO, it's not optional, so MSO trumps joiner.
v3: Only change intel_dp_has_joiner(), leave debugfs alone (Ville)
Fixes: bc71194e8897 ("drm/i915/edp: enable eDP MSO during link training")
Cc: <stable@vger.kernel.org> # v5.13+
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1668
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240614142311.589089-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 8b5a92ca24eb96bb71e2a55e352687487d87687f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Erico Nunes <nunes.erico@gmail.com>
Date: Fri Apr 5 17:29:49 2024 +0200
drm/lima: add mask irq callback to gp and pp
[ Upstream commit 49c13b4d2dd4a831225746e758893673f6ae961c ]
This is needed because we want to reset those devices in device-agnostic
code such as lima_sched.
In particular, masking irqs will be useful before a hard reset to
prevent race conditions.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405152951.1531555-2-nunes.erico@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Erico Nunes <nunes.erico@gmail.com>
Date: Fri Apr 5 17:29:50 2024 +0200
drm/lima: include pp bcast irq in timeout handler check
[ Upstream commit d8100caf40a35904d27ce446fb2088b54277997a ]
In commit 53cb55b20208 ("drm/lima: handle spurious timeouts due to high
irq latency") a check was added to detect an unexpectedly high interrupt
latency timeout.
With further investigation it was noted that on Mali-450 the pp bcast
irq may also be a trigger of race conditions against the timeout
handler, so add it to this check too.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405152951.1531555-3-nunes.erico@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Erico Nunes <nunes.erico@gmail.com>
Date: Fri Apr 5 17:29:51 2024 +0200
drm/lima: mask irqs in timeout path before hard reset
[ Upstream commit a421cc7a6a001b70415aa4f66024fa6178885a14 ]
There is a race condition in which a rendering job might take just long
enough to trigger the drm sched job timeout handler but also still
complete before the hard reset is done by the timeout handler.
This runs into race conditions not expected by the timeout handler.
In some very specific cases it currently may result in a refcount
imbalance on lima_pm_idle, with a stack dump such as:
[10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0
...
[10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0
...
[10136.669628] Call trace:
[10136.669634] lima_devfreq_record_idle+0xa0/0xb0
[10136.669646] lima_sched_pipe_task_done+0x5c/0xb0
[10136.669656] lima_gp_irq_handler+0xa8/0x120
[10136.669666] __handle_irq_event_percpu+0x48/0x160
[10136.669679] handle_irq_event+0x4c/0xc0
We can prevent that race condition entirely by masking the irqs at the
beginning of the timeout handler, at which point we give up on waiting
for that job entirely.
The irqs will be enabled again at the next hard reset which is already
done as a recovery by the timeout handler.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405152951.1531555-4-nunes.erico@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alex Deucher <alexander.deucher@amd.com>
Date: Mon May 20 09:11:45 2024 -0400
drm/radeon: fix UBSAN warning in kv_dpm.c
commit a498df5421fd737d11bfd152428ba6b1c8538321 upstream.
Adds bounds check for sumo_vid_mapping_entry.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michal Wajdeczko <michal.wajdeczko@intel.com>
Date: Mon Jun 17 17:47:36 2024 +0200
drm/xe/vf: Don't touch GuC irq registers if using memory irqs
[ Upstream commit d21d44dbdde83c4a8553c95de1853e63e88d7954 ]
On platforms where VFs are using memory based interrupts, we
missed invalid access to no longer existing interrupt registers,
as we keep them marked with XE_REG_OPTION_VF. To fix that just
either setup memirq vectors in GuC or enable legacy interrupts.
Fixes: aef4eb7c7dec ("drm/xe/vf: Setup memory based interrupts in GuC")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240617154736.685-1-michal.wajdeczko@intel.com
(cherry picked from commit f0ccd2d805e55e12b430d5d6b9acd9f891af455e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wander Lairson Costa <wander@redhat.com>
Date: Thu Apr 11 11:13:46 2024 -0300
drop_monitor: replace spin_lock by raw_spin_lock
[ Upstream commit f1e197a665c2148ebc25fe09c53689e60afea195 ]
trace_drop_common() is called with preemption disabled, and it acquires
a spin_lock. This is problematic for RT kernels because spin_locks are
sleeping locks in this configuration, which causes the following splat:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 2
5 locks held by rcuc/47/449:
#0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210
#1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130
#2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210
#3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70
#4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290
irq event stamp: 139909
hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80
hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290
softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170
softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0
Preemption disabled at:
[<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0
CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7
Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022
Call Trace:
<TASK>
dump_stack_lvl+0x8c/0xd0
dump_stack+0x14/0x20
__might_resched+0x21e/0x2f0
rt_spin_lock+0x5e/0x130
? trace_drop_common.constprop.0+0xb5/0x290
? skb_queue_purge_reason.part.0+0x1bf/0x230
trace_drop_common.constprop.0+0xb5/0x290
? preempt_count_sub+0x1c/0xd0
? _raw_spin_unlock_irqrestore+0x4a/0x80
? __pfx_trace_drop_common.constprop.0+0x10/0x10
? rt_mutex_slowunlock+0x26a/0x2e0
? skb_queue_purge_reason.part.0+0x1bf/0x230
? __pfx_rt_mutex_slowunlock+0x10/0x10
? skb_queue_purge_reason.part.0+0x1bf/0x230
trace_kfree_skb_hit+0x15/0x20
trace_kfree_skb+0xe9/0x150
kfree_skb_reason+0x7b/0x110
skb_queue_purge_reason.part.0+0x1bf/0x230
? __pfx_skb_queue_purge_reason.part.0+0x10/0x10
? mark_lock.part.0+0x8a/0x520
...
trace_drop_common() also disables interrupts, but this is a minor issue
because we could easily replace it with a local_lock.
Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic
context.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reported-by: Hu Chunyu <chuhu@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Tue May 21 10:30:02 2024 +0200
dt-bindings: dma: fsl-edma: fix dma-channels constraints
commit 1345a13f18370ad9e5bc98995959a27f9bd71464 upstream.
dma-channels is a number, not a list. Apply proper constraints on the
actual number.
Fixes: 6eb439dff645 ("dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240521083002.23262-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Thu Jun 20 13:34:49 2024 +0200
dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema
commit d4e001ffeccfc128c715057e866f301ac9b95728 upstream.
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 7ea75dd386be ("dt-bindings: i2c: convert i2c-at91 to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Thu Jun 20 13:34:50 2024 +0200
dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema
commit 5c8cfd592bb7632200b4edac8f2c7ec892ed9d81 upstream.
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 1acd4577a66f ("dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ard Biesheuvel <ardb@kernel.org>
Date: Mon Jun 10 16:02:13 2024 +0200
efi/x86: Free EFI memory map only when installing a new one.
commit 75dde792d6f6c2d0af50278bd374bf0c512fe196 upstream.
The logic in __efi_memmap_init() is shared between two different
execution flows:
- mapping the EFI memory map early or late into the kernel VA space, so
that its entries can be accessed;
- the x86 specific cloning of the EFI memory map in order to insert new
entries that are created as a result of making a memory reservation
via a call to efi_mem_reserve().
In the former case, the underlying memory containing the kernel's view
of the EFI memory map (which may be heavily modified by the kernel
itself on x86) is not modified at all, and the only thing that changes
is the virtual mapping of this memory, which is different between early
and late boot.
In the latter case, an entirely new allocation is created that carries a
new, updated version of the kernel's view of the EFI memory map. When
installing this new version, the old version will no longer be
referenced, and if the memory was allocated by the kernel, it will leak
unless it gets freed.
The logic that implements this freeing currently lives on the code path
that is shared between these two use cases, but it should only apply to
the latter. So move it to the correct spot.
While at it, drop the dummy definition for non-x86 architectures, as
that is no longer needed.
Cc: <stable@vger.kernel.org>
Fixes: f0ef6523475f ("efi: Fix efi_memmap_alloc() leaks")
Tested-by: Ashish Kalra <Ashish.Kalra@amd.com>
Link: https://lore.kernel.org/all/36ad5079-4326-45ed-85f6-928ff76483d3@amd.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Baokun Li <libaokun1@huawei.com>
Date: Tue Mar 19 19:33:17 2024 +0800
ext4: avoid overflow when setting values via sysfs
commit 9e8e819f8f272c4e5dcd0bd6c7450e36481ed139 upstream.
When setting values of type unsigned int through sysfs, we use kstrtoul()
to parse it and then truncate part of it as the final set value, when the
set value is greater than UINT_MAX, the set value will not match what we
see because of the truncation. As follows:
$ echo 4294967296 > /sys/fs/ext4/sda/mb_max_linear_groups
$ cat /sys/fs/ext4/sda/mb_max_linear_groups
0
So we use kstrtouint() to parse the attr_pointer_ui type to avoid the
inconsistency described above. In addition, a judgment is added to avoid
setting s_resv_clusters less than 0.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240319113325.3110393-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jan Kara <jack@suse.cz>
Date: Thu Mar 21 17:26:50 2024 +0100
ext4: do not create EA inode under buffer lock
[ Upstream commit 0a46ef234756dca04623b7591e8ebb3440622f0b ]
ext4_xattr_set_entry() creates new EA inodes while holding buffer lock
on the external xattr block. This is problematic as it nests all the
allocation locking (which acquires locks on other buffers) under the
buffer lock. This can even deadlock when the filesystem is corrupted and
e.g. quota file is setup to contain xattr block as data block. Move the
allocation of EA inode out of ext4_xattr_set_entry() into the callers.
Reported-by: syzbot+a43d4f48b8397d0e41a9@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240321162657.27420-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Baokun Li <libaokun1@huawei.com>
Date: Tue Mar 19 19:33:20 2024 +0800
ext4: fix slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists()
commit 13df4d44a3aaabe61cd01d277b6ee23ead2a5206 upstream.
We can trigger a slab-out-of-bounds with the following commands:
mkfs.ext4 -F /dev/$disk 10G
mount /dev/$disk /tmp/test
echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc
echo test > /tmp/test/file && sync
==================================================================
BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4]
Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11
CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521
Call Trace:
dump_stack_lvl+0x2c/0x50
kasan_report+0xb6/0xf0
ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4]
ext4_mb_regular_allocator+0x19e9/0x2370 [ext4]
ext4_mb_new_blocks+0x88a/0x1370 [ext4]
ext4_ext_map_blocks+0x14f7/0x2390 [ext4]
ext4_map_blocks+0x569/0xea0 [ext4]
ext4_do_writepages+0x10f6/0x1bc0 [ext4]
[...]
==================================================================
The flow of issue triggering is as follows:
// Set s_mb_group_prealloc to 2147483647 via sysfs
ext4_mb_new_blocks
ext4_mb_normalize_request
ext4_mb_normalize_group_request
ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc
ext4_mb_regular_allocator
ext4_mb_choose_next_group
ext4_mb_choose_next_group_best_avail
mb_avg_fragment_size_order
order = fls(len) - 2 = 29
ext4_mb_find_good_group_avg_frag_lists
frag_list = &sbi->s_mb_avg_fragment_size[order]
if (list_empty(frag_list)) // Trigger SOOB!
At 4k block size, the length of the s_mb_avg_fragment_size list is 14,
but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds
to be triggered by an attempt to access an element at index 29.
Add a new attr_id attr_clusters_in_group with values in the range
[0, sbi->s_clusters_per_group] and declare mb_group_prealloc as
that type to fix the issue. In addition avoid returning an order
from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb)
and reduce some useless loops.
Fixes: 7e170922f06b ("ext4: Add allocation criteria 1.5 (CR1_5)")
CC: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20240319113325.3110393-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Baokun Li <libaokun1@huawei.com>
Date: Tue Jan 2 21:37:30 2024 +0800
ext4: fix uninitialized ratelimit_state->lock access in __ext4_fill_super()
[ Upstream commit b4b4fda34e535756f9e774fb2d09c4537b7dfd1c ]
In the following concurrency we will access the uninitialized rs->lock:
ext4_fill_super
ext4_register_sysfs
// sysfs registered msg_ratelimit_interval_ms
// Other processes modify rs->interval to
// non-zero via msg_ratelimit_interval_ms
ext4_orphan_cleanup
ext4_msg(sb, KERN_INFO, "Errors on filesystem, "
__ext4_msg
___ratelimit(&(EXT4_SB(sb)->s_msg_ratelimit_state)
if (!rs->interval) // do nothing if interval is 0
return 1;
raw_spin_trylock_irqsave(&rs->lock, flags)
raw_spin_trylock(lock)
_raw_spin_trylock
__raw_spin_trylock
spin_acquire(&lock->dep_map, 0, 1, _RET_IP_)
lock_acquire
__lock_acquire
register_lock_class
assign_lock_key
dump_stack();
ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10);
raw_spin_lock_init(&rs->lock);
// init rs->lock here
and get the following dump_stack:
=========================================================
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 12 PID: 753 Comm: mount Tainted: G E 6.7.0-rc6-next-20231222 #504
[...]
Call Trace:
dump_stack_lvl+0xc5/0x170
dump_stack+0x18/0x30
register_lock_class+0x740/0x7c0
__lock_acquire+0x69/0x13a0
lock_acquire+0x120/0x450
_raw_spin_trylock+0x98/0xd0
___ratelimit+0xf6/0x220
__ext4_msg+0x7f/0x160 [ext4]
ext4_orphan_cleanup+0x665/0x740 [ext4]
__ext4_fill_super+0x21ea/0x2b10 [ext4]
ext4_fill_super+0x14d/0x360 [ext4]
[...]
=========================================================
Normally interval is 0 until s_msg_ratelimit_state is initialized, so
___ratelimit() does nothing. But registering sysfs precedes initializing
rs->lock, so it is possible to change rs->interval to a non-zero value
via the msg_ratelimit_interval_ms interface of sysfs while rs->lock is
uninitialized, and then a call to ext4_msg triggers the problem by
accessing an uninitialized rs->lock. Therefore register sysfs after all
initializations are complete to avoid such problems.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240102133730.1098120-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jaegeuk Kim <jaegeuk@kernel.org>
Date: Wed Apr 3 23:07:53 2024 +0000
f2fs: don't set RO when shutting down f2fs
[ Upstream commit 3bdb7f161697e2d5123b89fe1778ef17a44858e7 ]
Shutdown does not check the error of thaw_super due to readonly, which
causes a deadlock like below.
f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC) issue_discard_thread
- bdev_freeze
- freeze_super
- f2fs_stop_checkpoint()
- f2fs_handle_critical_error - sb_start_write
- set RO - waiting
- bdev_thaw
- thaw_super_locked
- return -EINVAL, if sb_rdonly()
- f2fs_stop_discard_thread
-> wait for kthread_stop(discard_thread);
Reported-by: "Light Hsieh (謝明燈)" <Light.Hsieh@mediatek.com>
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Fri Mar 22 22:59:55 2024 +0800
f2fs: fix to detect inconsistent nat entry during truncation
[ Upstream commit 92c556ed6318e13c16746495a8d4513129eb9b0f ]
As Roman Smirnov reported as below:
"
There is a possible bug in f2fs_truncate_inode_blocks():
if (err < 0 && err != -ENOENT)
goto fail;
...
offset[1] = 0;
offset[0]++;
nofs += err;
If err = -ENOENT then nofs will sum with an error code,
which is strange behaviour. Also if nofs < ENOENT this will
cause an overflow. err will be equal to -ENOENT with the
following call stack:
truncate_nodes()
f2fs_get_node_page()
__get_node_page()
read_node_page()
"
If nat is corrupted, truncate_nodes() may return -ENOENT, and
f2fs_truncate_inode_blocks() doesn't handle such error correctly,
fix it.
Reported-by: Roman Smirnov <r.smirnov@omp.ru>
Closes: https://lore.kernel.org/linux-f2fs-devel/085b27fd2b364a3c8c3a9ca77363e246@omp.ru
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunlei He <heyunlei@oppo.com>
Date: Tue Mar 26 14:10:43 2024 +0800
f2fs: remove clear SB_INLINECRYPT flag in default_options
[ Upstream commit ac5eecf481c29942eb9a862e758c0c8b68090c33 ]
In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set.
If create new file or open file during this gap, these files
will not use inlinecrypt. Worse case, it may lead to data
corruption if wrappedkey_v0 is enable.
Thread A: Thread B:
-f2fs_remount -f2fs_file_open or f2fs_new_inode
-default_options
<- clear SB_INLINECRYPT flag
-fscrypt_select_encryption_impl
-parse_options
<- set SB_INLINECRYPT again
Signed-off-by: Yunlei He <heyunlei@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sudeep Holla <sudeep.holla@arm.com>
Date: Wed May 15 10:55:28 2024 +0100
firmware: psci: Fix return value from psci_system_suspend()
[ Upstream commit e7c3696d4692e8046d25f6e63f983e934e12f2c5 ]
Currently we return the value from invoke_psci_fn() directly as return
value from psci_system_suspend(). It is wrong to send the PSCI interface
return value directly. psci_to_linux_errno() provide the mapping from
PSCI return value to the one that can be returned to the callers within
the kernel.
Use psci_to_linux_errno() to convert and return the correct value from
psci_system_suspend().
Fixes: faf7ec4a92c0 ("drivers: firmware: psci: add system suspend support")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240515095528.1949992-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kemeng Shi <shikemeng@huaweicloud.com>
Date: Wed Feb 28 17:19:54 2024 +0800
fs/writeback: bail out if there is no more inodes for IO and queued once
[ Upstream commit d92109891f21cf367caa2cc6dff11a4411d917f4 ]
For case there is no more inodes for IO in io list from last wb_writeback,
We may bail out early even there is inode in dirty list should be written
back. Only bail out when we queued once to avoid missing dirtied inode.
This is from code reading...
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20240228091958.288260-3-shikemeng@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
[brauner@kernel.org: fold in memory corruption fix from Jan in [1]]
Link: https://lore.kernel.org/r/20240405132346.bid7gibby3lxxhez@quack3 [1]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Oberparleiter <oberpar@linux.ibm.com>
Date: Mon Jun 10 11:27:43 2024 +0200
gcov: add support for GCC 14
commit c1558bc57b8e5b4da5d821537cd30e2e660861d8 upstream.
Using gcov on kernels compiled with GCC 14 results in truncated 16-byte
long .gcda files with no usable data. To fix this, update GCOV_COUNTERS
to match the value defined by GCC 14.
Tested with GCC versions 14.1.0 and 13.2.0.
Link: https://lkml.kernel.org/r/20240610092743.1609845-1-oberpar@linux.ibm.com
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reported-by: Allison Henderson <allison.henderson@oracle.com>
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean O'Brien <seobrien@chromium.org>
Date: Mon Apr 29 18:08:05 2024 +0000
HID: Add quirk for Logitech Casa touchpad
[ Upstream commit dd2c345a94cfa3873cc20db87387ee509c345c1b ]
This device sometimes doesn't send touch release signals when moving
from >=4 fingers to <4 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.
MT_QUIRK_FORCE_MULTI_INPUT is not necessary for this device, but does no
harm.
Signed-off-by: Sean O'Brien <seobrien@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrew Ballance <andrewjballance@gmail.com>
Date: Sun Jun 2 03:50:23 2024 -0500
hid: asus: asus_report_fixup: fix potential read out of bounds
commit 89e1ee118d6f0ee6bd6e80d8fe08839875daa241 upstream.
syzbot reported a potential read out of bounds in asus_report_fixup.
this patch adds checks so that a read out of bounds will not occur
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Reported-by: <syzbot+07762f019fd03d01f04c@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=07762f019fd03d01f04c
Fixes: 59d2f5b7392e ("HID: asus: fix more n-key report descriptors if n-key quirked")
Link: https://lore.kernel.org/r/20240602085023.1720492-1-andrewjballance@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luke D. Jones <luke@ljones.dev>
Date: Tue Apr 16 21:03:59 2024 +1200
HID: asus: fix more n-key report descriptors if n-key quirked
[ Upstream commit 59d2f5b7392e988a391e6924e177c1a68d50223d ]
Adjusts the report descriptor for N-Key devices to
make the output count 0x01 which completely avoids
the need for a block of filtering.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Stein <alexander.stein@ew.tq-group.com>
Date: Mon Apr 22 13:36:29 2024 +0200
i2c: lpi2c: Avoid calling clk_get_rate during transfer
[ Upstream commit 4268254a39484fc11ba991ae148bacbe75d9cc0a ]
Instead of repeatedly calling clk_get_rate for each transfer, lock
the clock rate and cache the value.
A deadlock has been observed while adding tlv320aic32x4 audio codec to
the system. When this clock provider adds its clock, the clk mutex is
locked already, it needs to access i2c, which in return needs the mutex
for clk_get_rate as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Grygorii Tertychnyi <grembeter@gmail.com>
Date: Mon May 20 17:39:32 2024 +0200
i2c: ocores: set IACK bit after core is enabled
commit 5a72477273066b5b357801ab2d315ef14949d402 upstream.
Setting IACK bit when core is disabled does not clear the "Interrupt Flag"
bit in the status register, and the interrupt remains pending.
Sometimes it causes failure for the very first message transfer, that is
usually a device probe.
Hence, set IACK bit after core is enabled to clear pending interrupt.
Fixes: 18f98b1e3147 ("[PATCH] i2c: New bus driver for the OpenCores I2C controller")
Signed-off-by: Grygorii Tertychnyi <grygorii.tertychnyi@leica-geosystems.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: En-Wei Wu <en-wei.wu@canonical.com>
Date: Thu May 30 22:21:31 2024 +0800
ice: avoid IRQ collision to fix init failure on ACPI S3 resume
[ Upstream commit bc69ad74867dba1377abe14356c94a946d9837a3 ]
A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes
that irdma would break and report hardware initialization failed after
suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5).
The problem is caused due to the collision between the irq numbers
requested in irdma and the irq numbers requested in other drivers
after suspend/resume.
The irq numbers used by irdma are derived from ice's ice_pf->msix_entries
which stores mappings between MSI-X index and Linux interrupt number.
It's supposed to be cleaned up when suspend and rebuilt in resume but
it's not, causing irdma using the old irq numbers stored in the old
ice_pf->msix_entries to request_irq() when resume. And eventually
collide with other drivers.
This patch fixes this problem. On suspend, we call ice_deinit_rdma() to
clean up the ice_pf->msix_entries (and free the MSI-X vectors used by
irdma if we've dynamically allocated them). On resume, we call
ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the
MSI-X vectors if we would like to dynamically allocate them).
Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA")
Tested-by: Cyrus Lien <cyrus.lien@canonical.com>
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Paul Greenwalt <paul.greenwalt@intel.com>
Date: Thu May 30 13:06:17 2024 -0400
ice: fix 200G link speed message log
[ Upstream commit aeccadb24d9dacdde673a0f68f0a9135c6be4993 ]
Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include 200G link speed message
support. As a result the driver incorrectly reports Unknown for 200G
link speed.
Fix this by adding 200G support to ice_print_link_msg().
Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marcin Szycik <marcin.szycik@linux.intel.com>
Date: Tue Jun 18 14:02:05 2024 -0700
ice: Fix VSI list rule with ICE_SW_LKUP_LAST type
[ Upstream commit 74382aebc9035470ec4c789bdb0d09d8c14f261e ]
Adding/updating VSI list rule, as well as allocating/freeing VSI list
resource are called several times with type ICE_SW_LKUP_LAST, which fails
because ice_update_vsi_list_rule() and ice_aq_alloc_free_vsi_list()
consider it invalid. Allow calling these functions with ICE_SW_LKUP_LAST.
This fixes at least one issue in switchdev mode, where the same rule with
different action cannot be added, e.g.:
tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \
dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF1_PR
tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \
dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF2_PR
Fixes: 0f94570d0cae ("ice: allow adding advanced rules")
Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240618210206.981885-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wojciech Drewek <wojciech.drewek@intel.com>
Date: Tue Jun 4 14:55:14 2024 +0200
ice: implement AQ download pkg retry
[ Upstream commit a27f6ac9d404ea84196639dcc456f969ef813c0f ]
ice_aqc_opc_download_pkg (0x0C40) AQ sporadically returns error due
to FW issue. Fix this by retrying five times before moving to
Safe Mode. Sleep for 20 ms before retrying. This was tested with the
4.40 firmware.
Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: GUO Zihua <guozihua@huawei.com>
Date: Tue May 7 01:25:41 2024 +0000
ima: Avoid blocking in RCU read-side critical section
commit 9a95c5bfbf02a0a7f5983280fe284a0ff0836c34 upstream.
A panic happens in ima_match_policy:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
PGD 42f873067 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 5 PID: 1286325 Comm: kubeletmonit.sh
Kdump: loaded Tainted: P
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 0.0.0 02/06/2015
RIP: 0010:ima_match_policy+0x84/0x450
Code: 49 89 fc 41 89 cf 31 ed 89 44 24 14 eb 1c 44 39
7b 18 74 26 41 83 ff 05 74 20 48 8b 1b 48 3b 1d
f2 b9 f4 00 0f 84 9c 01 00 00 <44> 85 73 10 74 ea
44 8b 6b 14 41 f6 c5 01 75 d4 41 f6 c5 02 74 0f
RSP: 0018:ff71570009e07a80 EFLAGS: 00010207
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000200
RDX: ffffffffad8dc7c0 RSI: 0000000024924925 RDI: ff3e27850dea2000
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffabfce739
R10: ff3e27810cc42400 R11: 0000000000000000 R12: ff3e2781825ef970
R13: 00000000ff3e2785 R14: 000000000000000c R15: 0000000000000001
FS: 00007f5195b51740(0000)
GS:ff3e278b12d40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 0000000626d24002 CR4: 0000000000361ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
ima_get_action+0x22/0x30
process_measurement+0xb0/0x830
? page_add_file_rmap+0x15/0x170
? alloc_set_pte+0x269/0x4c0
? prep_new_page+0x81/0x140
? simple_xattr_get+0x75/0xa0
? selinux_file_open+0x9d/0xf0
ima_file_check+0x64/0x90
path_openat+0x571/0x1720
do_filp_open+0x9b/0x110
? page_counter_try_charge+0x57/0xc0
? files_cgroup_alloc_fd+0x38/0x60
? __alloc_fd+0xd4/0x250
? do_sys_open+0x1bd/0x250
do_sys_open+0x1bd/0x250
do_syscall_64+0x5d/0x1d0
entry_SYSCALL_64_after_hwframe+0x65/0xca
Commit c7423dbdbc9e ("ima: Handle -ESTALE returned by
ima_filter_rule_match()") introduced call to ima_lsm_copy_rule within a
RCU read-side critical section which contains kmalloc with GFP_KERNEL.
This implies a possible sleep and violates limitations of RCU read-side
critical sections on non-PREEMPT systems.
Sleeping within RCU read-side critical section might cause
synchronize_rcu() returning early and break RCU protection, allowing a
UAF to happen.
The root cause of this issue could be described as follows:
| Thread A | Thread B |
| |ima_match_policy |
| | rcu_read_lock |
|ima_lsm_update_rule | |
| synchronize_rcu | |
| | kmalloc(GFP_KERNEL)|
| | sleep |
==> synchronize_rcu returns early
| kfree(entry) | |
| | entry = entry->next|
==> UAF happens and entry now becomes NULL (or could be anything).
| | entry->action |
==> Accessing entry might cause panic.
To fix this issue, we are converting all kmalloc that is called within
RCU read-side critical section to use GFP_ATOMIC.
Fixes: c7423dbdbc9e ("ima: Handle -ESTALE returned by ima_filter_rule_match()")
Cc: stable@vger.kernel.org
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: fixed missing comment, long lines, !CONFIG_IMA_LSM_RULES case]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chenliang Li <cliang01.li@samsung.com>
Date: Wed Jun 19 14:38:19 2024 +0800
io_uring/rsrc: fix incorrect assignment of iter->nr_segs in io_import_fixed
[ Upstream commit a23800f08a60787dfbf2b87b2e6ed411cb629859 ]
In io_import_fixed when advancing the iter within the first bvec, the
iter->nr_segs is set to bvec->bv_len. nr_segs should be the number of
bvecs, plus we don't need to adjust it here, so just remove it.
Fixes: b000ae0ec2d7 ("io_uring/rsrc: optimise single entry advance")
Signed-off-by: Chenliang Li <cliang01.li@samsung.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20240619063819.2445-1-cliang01.li@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Thu Mar 21 07:38:38 2024 -0600
io_uring/sqpoll: work around a potential audit memory leak
[ Upstream commit c4ce0ab27646f4206a9eb502d6fe45cb080e1cae ]
kmemleak complains that there's a memory leak related to connect
handling:
unreferenced object 0xffff0001093bdf00 (size 128):
comm "iou-sqp-455", pid 457, jiffies 4294894164
hex dump (first 32 bytes):
02 00 fa ea 7f 00 00 01 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 2e481b1a):
[<00000000c0a26af4>] kmemleak_alloc+0x30/0x38
[<000000009c30bb45>] kmalloc_trace+0x228/0x358
[<000000009da9d39f>] __audit_sockaddr+0xd0/0x138
[<0000000089a93e34>] move_addr_to_kernel+0x1a0/0x1f8
[<000000000b4e80e6>] io_connect_prep+0x1ec/0x2d4
[<00000000abfbcd99>] io_submit_sqes+0x588/0x1e48
[<00000000e7c25e07>] io_sq_thread+0x8a4/0x10e4
[<00000000d999b491>] ret_from_fork+0x10/0x20
which can can happen if:
1) The command type does something on the prep side that triggers an
audit call.
2) The thread hasn't done any operations before this that triggered
an audit call inside ->issue(), where we have audit_uring_entry()
and audit_uring_exit().
Work around this by issuing a blanket NOP operation before the SQPOLL
does anything.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aleksandr Aprelkov <aaprelkov@usergate.com>
Date: Wed Apr 3 12:37:59 2024 +0700
iommu/arm-smmu-v3: Free MSIs in case of ENOMEM
[ Upstream commit 80fea979dd9d48d67c5b48d2f690c5da3e543ebd ]
If devm_add_action() returns -ENOMEM, then MSIs are allocated but not
not freed on teardown. Use devm_add_action_or_reset() instead to keep
the static analyser happy.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Aleksandr Aprelkov <aaprelkov@usergate.com>
Link: https://lore.kernel.org/r/20240403053759.643164-1-aaprelkov@usergate.com
[will: Tweak commit message, remove warning message]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Jun 14 08:20:02 2024 +0000
ipv6: prevent possible NULL deref in fib6_nh_init()
[ Upstream commit 2eab4543a2204092c3a7af81d7d6c506e59a03a6 ]
syzbot reminds us that in6_dev_get() can return NULL.
fib6_nh_init()
ip6_validate_gw( &idev )
ip6_route_check_nh( idev )
*idev = in6_dev_get(dev); // can be NULL
Oops: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7]
CPU: 0 PID: 11237 Comm: syz-executor.3 Not tainted 6.10.0-rc2-syzkaller-00249-gbe27b8965297 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
RIP: 0010:fib6_nh_init+0x640/0x2160 net/ipv6/route.c:3606
Code: 00 00 fc ff df 4c 8b 64 24 58 48 8b 44 24 28 4c 8b 74 24 30 48 89 c1 48 89 44 24 28 48 8d 98 e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 0f 85 b3 17 00 00 8b 1b 31 ff 89 de e8 b8 8b
RSP: 0018:ffffc900032775a0 EFLAGS: 00010202
RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffffc90003277a54 RDI: ffff88802b3a08d8
RBP: ffffc900032778b0 R08: 00000000000002fc R09: 0000000000000000
R10: 00000000000002fc R11: 0000000000000000 R12: ffff88802b3a08b8
R13: 1ffff9200064eec8 R14: ffffc90003277a00 R15: dffffc0000000000
FS: 00007f940feb06c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000245e8000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ip6_route_info_create+0x99e/0x12b0 net/ipv6/route.c:3809
ip6_route_add+0x28/0x160 net/ipv6/route.c:3853
ipv6_route_ioctl+0x588/0x870 net/ipv6/route.c:4483
inet6_ioctl+0x21a/0x280 net/ipv6/af_inet6.c:579
sock_do_ioctl+0x158/0x460 net/socket.c:1222
sock_ioctl+0x629/0x8e0 net/socket.c:1341
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f940f07cea9
Fixes: 428604fb118f ("ipv6: do not set routes if disable_ipv6 has been enabled")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240614082002.26407-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Sat Jun 15 15:14:54 2024 +0000
ipv6: prevent possible NULL dereference in rt6_probe()
[ Upstream commit b86762dbe19a62e785c189f313cda5b989931f37 ]
syzbot caught a NULL dereference in rt6_probe() [1]
Bail out if __in6_dev_get() returns NULL.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cb: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000658-0x000000000000065f]
CPU: 1 PID: 22444 Comm: syz-executor.0 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381d4e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
RIP: 0010:rt6_probe net/ipv6/route.c:656 [inline]
RIP: 0010:find_match+0x8c4/0xf50 net/ipv6/route.c:758
Code: 14 fd f7 48 8b 85 38 ff ff ff 48 c7 45 b0 00 00 00 00 48 8d b8 5c 06 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 19
RSP: 0018:ffffc900034af070 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004521000
RDX: 00000000000000cb RSI: ffffffff8990d0cd RDI: 000000000000065c
RBP: ffffc900034af150 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000002 R12: 000000000000000a
R13: 1ffff92000695e18 R14: ffff8880244a1d20 R15: 0000000000000000
FS: 00007f4844a5a6c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31b27000 CR3: 000000002d42c000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
rt6_nh_find_match+0xfa/0x1a0 net/ipv6/route.c:784
nexthop_for_each_fib6_nh+0x26d/0x4a0 net/ipv4/nexthop.c:1496
__find_rr_leaf+0x6e7/0xe00 net/ipv6/route.c:825
find_rr_leaf net/ipv6/route.c:853 [inline]
rt6_select net/ipv6/route.c:897 [inline]
fib6_table_lookup+0x57e/0xa30 net/ipv6/route.c:2195
ip6_pol_route+0x1cd/0x1150 net/ipv6/route.c:2231
pol_lookup_func include/net/ip6_fib.h:616 [inline]
fib6_rule_lookup+0x386/0x720 net/ipv6/fib6_rules.c:121
ip6_route_output_flags_noref net/ipv6/route.c:2639 [inline]
ip6_route_output_flags+0x1d0/0x640 net/ipv6/route.c:2651
ip6_dst_lookup_tail.constprop.0+0x961/0x1760 net/ipv6/ip6_output.c:1147
ip6_dst_lookup_flow+0x99/0x1d0 net/ipv6/ip6_output.c:1250
rawv6_sendmsg+0xdab/0x4340 net/ipv6/raw.c:898
inet_sendmsg+0x119/0x140 net/ipv4/af_inet.c:853
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
sock_write_iter+0x4b8/0x5c0 net/socket.c:1160
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0x6b6/0x1140 fs/read_write.c:590
ksys_write+0x1f8/0x260 fs/read_write.c:643
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 52e1635631b3 ("[IPV6]: ROUTE: Add router_probe_interval sysctl.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240615151454.166404-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aleksandr Nogikh <nogikh@google.com>
Date: Tue Jun 11 15:32:29 2024 +0200
kcov: don't lose track of remote references during softirqs
commit 01c8f9806bde438ca1c8cbbc439f0a14a6694f6c upstream.
In kcov_remote_start()/kcov_remote_stop(), we swap the previous KCOV
metadata of the current task into a per-CPU variable. However, the
kcov_mode_enabled(mode) check is not sufficient in the case of remote KCOV
coverage: current->kcov_mode always remains KCOV_MODE_DISABLED for remote
KCOV objects.
If the original task that has invoked the KCOV_REMOTE_ENABLE ioctl happens
to get interrupted and kcov_remote_start() is called, it ultimately leads
to kcov_remote_stop() NOT restoring the original KCOV reference. So when
the task exits, all registered remote KCOV handles remain active forever.
The most uncomfortable effect (at least for syzkaller) is that the bug
prevents the reuse of the same /sys/kernel/debug/kcov descriptor. If
we obtain it in the parent process and then e.g. drop some
capabilities and continuously fork to execute individual programs, at
some point current->kcov of the forked process is lost,
kcov_task_exit() takes no action, and all KCOV_REMOTE_ENABLE ioctls
calls from subsequent forks fail.
And, yes, the efficiency is also affected if we keep on losing remote
kcov objects.
a) kcov_remote_map keeps on growing forever.
b) (If I'm not mistaken), we're also not freeing the memory referenced
by kcov->area.
Fix it by introducing a special kcov_mode that is assigned to the task
that owns a KCOV remote object. It makes kcov_mode_enabled() return true
and yet does not trigger coverage collection in __sanitizer_cov_trace_pc()
and write_comp_data().
[nogikh@google.com: replace WRITE_ONCE() with an ordinary assignment]
Link: https://lkml.kernel.org/r/20240614171221.2837584-1-nogikh@google.com
Link: https://lkml.kernel.org/r/20240611133229.527822-1-nogikh@google.com
Fixes: 5ff3b30ab57d ("kcov: collect coverage from interrupts")
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Stephen Brennan <stephen.s.brennan@oracle.com>
Date: Wed May 1 09:29:56 2024 -0700
kprobe/ftrace: bail out if ftrace was killed
[ Upstream commit 1a7d0890dd4a502a202aaec792a6c04e6e049547 ]
If an error happens in ftrace, ftrace_kill() will prevent disarming
kprobes. Eventually, the ftrace_ops associated with the kprobes will be
freed, yet the kprobes will still be active, and when triggered, they
will use the freed memory, likely resulting in a page fault and panic.
This behavior can be reproduced quite easily, by creating a kprobe and
then triggering a ftrace_kill(). For simplicity, we can simulate an
ftrace error with a kernel module like [1]:
[1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer
sudo perf probe --add commit_creds
sudo perf trace -e probe:commit_creds
# In another terminal
make
sudo insmod ftrace_killer.ko # calls ftrace_kill(), simulating bug
# Back to perf terminal
# ctrl-c
sudo perf probe --del commit_creds
After a short period, a page fault and panic would occur as the kprobe
continues to execute and uses the freed ftrace_ops. While ftrace_kill()
is supposed to be used only in extreme circumstances, it is invoked in
FTRACE_WARN_ON() and so there are many places where an unexpected bug
could be triggered, yet the system may continue operating, possibly
without the administrator noticing. If ftrace_kill() does not panic the
system, then we should do everything we can to continue operating,
rather than leave a ticking time bomb.
Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri May 17 19:17:55 2024 -0700
kprobe/ftrace: fix build error due to bad function definition
commit 4b377b4868ef17b040065bd468668c707d2477a5 upstream.
Commit 1a7d0890dd4a ("kprobe/ftrace: bail out if ftrace was killed")
introduced a bad K&R function definition, which we haven't accepted in a
long long time.
Gcc seems to let it slide, but clang notices with the appropriate error:
kernel/kprobes.c:1140:24: error: a function declaration without a prototype is deprecated in all >
1140 | void kprobe_ftrace_kill()
| ^
| void
but this commit was apparently never in linux-next before it was sent
upstream, so it didn't get the appropriate build test coverage.
Fixes: 1a7d0890dd4a kprobe/ftrace: bail out if ftrace was killed
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kunwu Chan <chentao@kylinos.cn>
Date: Tue Apr 23 16:21:02 2024 +0800
kselftest: arm64: Add a null pointer check
[ Upstream commit 80164282b3620a3cb73de6ffda5592743e448d0e ]
There is a 'malloc' call, which can be unsuccessful.
This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423082102.2018886-1-chentao@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marc Zyngier <maz@kernel.org>
Date: Wed Jun 5 18:56:37 2024 +0100
KVM: arm64: Disassociate vcpus from redistributor region on teardown
commit 0d92e4a7ffd5c42b9fa864692f82476c0bf8bcc8 upstream.
When tearing down a redistributor region, make sure we don't have
any dangling pointer to that region stored in a vcpu.
Fixes: e5a35635464b ("kvm: arm64: vgic-v3: Introduce vgic_v3_free_redist_region()")
Reported-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240605175637.1635653-1-maz@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Breno Leitao <leitao@debian.org>
Date: Fri May 10 02:23:52 2024 -0700
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
commit 49f683b41f28918df3e51ddc0d928cb2e934ccdb upstream.
Use {READ,WRITE}_ONCE() to access kvm->last_boosted_vcpu to ensure the
loads and stores are atomic. In the extremely unlikely scenario the
compiler tears the stores, it's theoretically possible for KVM to attempt
to get a vCPU using an out-of-bounds index, e.g. if the write is split
into multiple 8-bit stores, and is paired with a 32-bit load on a VM with
257 vCPUs:
CPU0 CPU1
last_boosted_vcpu = 0xff;
(last_boosted_vcpu = 0x100)
last_boosted_vcpu[15:8] = 0x01;
i = (last_boosted_vcpu = 0x1ff)
last_boosted_vcpu[7:0] = 0x00;
vcpu = kvm->vcpu_array[0x1ff];
As detected by KCSAN:
BUG: KCSAN: data-race in kvm_vcpu_on_spin [kvm] / kvm_vcpu_on_spin [kvm]
write to 0xffffc90025a92344 of 4 bytes by task 4340 on cpu 16:
kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4112) kvm
handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel
vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:?
arch/x86/kvm/vmx/vmx.c:6606) kvm_intel
vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm
kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm
kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm
__se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890)
__x64_sys_ioctl (fs/ioctl.c:890)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
read to 0xffffc90025a92344 of 4 bytes by task 4342 on cpu 4:
kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4069) kvm
handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel
vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:?
arch/x86/kvm/vmx/vmx.c:6606) kvm_intel
vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm
kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm
kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm
__se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890)
__x64_sys_ioctl (fs/ioctl.c:890)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
value changed: 0x00000012 -> 0x00000000
Fixes: 217ece6129f2 ("KVM: use yield_to instead of sleep in kvm_vcpu_on_spin")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240510092353.2261824-1-leitao@debian.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Mon Jun 10 18:48:45 2024 -0700
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
commit f3ced000a2df53f4b12849e121769045a81a3b22 upstream.
Sync pending posted interrupts to the IRR prior to re-scanning I/O APIC
routes, irrespective of whether the I/O APIC is emulated by userspace or
by KVM. If a level-triggered interrupt routed through the I/O APIC is
pending or in-service for a vCPU, KVM needs to intercept EOIs on said
vCPU even if the vCPU isn't the destination for the new routing, e.g. if
servicing an interrupt using the old routing races with I/O APIC
reconfiguration.
Commit fceb3a36c29a ("KVM: x86: ioapic: Fix level-triggered EOI and
userspace I/OAPIC reconfigure race") fixed the common cases, but
kvm_apic_pending_eoi() only checks if an interrupt is in the local
APIC's IRR or ISR, i.e. misses the uncommon case where an interrupt is
pending in the PIR.
Failure to intercept EOI can manifest as guest hangs with Windows 11 if
the guest uses the RTC as its timekeeping source, e.g. if the VMM doesn't
expose a more modern form of time to the guest.
Cc: stable@vger.kernel.org
Cc: Adamos Ttofari <attofari@amazon.de>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240611014845.82795-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Thu Jun 27 13:52:32 2024 +0200
Linux 6.9.7
Link: https://lore.kernel.org/r/20240625085548.033507125@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Christian Heusel <christian@heusel.eu>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hui Li <lihui@loongson.cn>
Date: Fri Jun 21 10:18:40 2024 +0800
LoongArch: Fix multiple hardware watchpoint issues
commit 3eb2a8b23598e90fda43abb0f23cb267bd5018ba upstream.
In the current code, if multiple hardware breakpoints/watchpoints in
a user-space thread, some of them will not be triggered.
When debugging the following code using gdb.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
printf("start test\n");
a = 1;
printf("a = %d\n", a);
printf("end test\n");
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) watch a
Hardware watchpoint 2: a
(gdb) hbreak 8
Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
a = 1
Breakpoint 3, main () at test.c:8
8 printf("end test\n");
...
The first hardware watchpoint is not triggered, the root causes are:
1. In hw_breakpoint_control(), The FWPnCFG1.2.4/MWPnCFG1.2.4 register
settings are not distinguished. They should be set based on hardware
watchpoint functions (fetch or load/store operations).
2. In breakpoint_handler() and watchpoint_handler(), it doesn't identify
which watchpoint is triggered. So, all watchpoint-related perf_event
callbacks are called and siginfo is sent to the user space. This will
cause user-space unable to determine which watchpoint is triggered.
The kernel need to identity which watchpoint is triggered via MWPS/
FWPS registers, and then call the corresponding perf event callbacks
to report siginfo to the user-space.
Modify the relevant code to solve above issues.
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
With this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) watch a
Hardware watchpoint 2: a
(gdb) hbreak 8
Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
Hardware watchpoint 2: a
Old value = 0
New value = 1
main () at test.c:7
7 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
Breakpoint 3, main () at test.c:8
8 printf("end test\n");
(gdb) c
Continuing.
end test
[Inferior 1 (process 778) exited normally]
Cc: stable@vger.kernel.org
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hui Li <lihui@loongson.cn>
Date: Fri Jun 21 10:18:40 2024 +0800
LoongArch: Fix watchpoint setting error
commit f63a47b34b140ed1ca39d7e4bd4f1cdc617fc316 upstream.
In the current code, when debugging the following code using gdb,
"invalid argument ..." message will be displayed.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
a = 1;
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) watch a
Hardware watchpoint 1: a
(gdb) r
...
Invalid argument setting hardware debug registers
There are mainly two types of issues.
1. Some incorrect judgment condition existed in user_watch_state
argument parsing, causing -EINVAL to be returned.
When setting up a watchpoint, gdb uses the ptrace interface,
ptrace(PTRACE_SETREGSET, tid, NT_LOONGARCH_HW_WATCH, (void *) &iov)).
Register values in user_watch_state as follows:
addr[0] = 0x0, mask[0] = 0x0, ctrl[0] = 0x0
addr[1] = 0x0, mask[1] = 0x0, ctrl[1] = 0x0
addr[2] = 0x0, mask[2] = 0x0, ctrl[2] = 0x0
addr[3] = 0x0, mask[3] = 0x0, ctrl[3] = 0x0
addr[4] = 0x0, mask[4] = 0x0, ctrl[4] = 0x0
addr[5] = 0x0, mask[5] = 0x0, ctrl[5] = 0x0
addr[6] = 0x0, mask[6] = 0x0, ctrl[6] = 0x0
addr[7] = 0x12000803c, mask[7] = 0x0, ctrl[7] = 0x610
In arch_bp_generic_fields(), return -EINVAL when ctrl.len is
LOONGARCH_BREAKPOINT_LEN_8(0b00). So delete the incorrect judgment here.
In ptrace_hbp_fill_attr_ctrl(), when note_type is NT_LOONGARCH_HW_WATCH
and ctrl[0] == 0x0, if ((type & HW_BREAKPOINT_RW) != type) will return
-EINVAL. Here ctrl.type should be set based on note_type, and unnecessary
judgments can be removed.
2. The watchpoint argument was not set correctly due to unnecessary
offset and alignment_mask.
Modify ptrace_hbp_fill_attr_ctrl() and hw_breakpoint_arch_parse(), which
ensure the watchpont argument is set correctly.
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
Cc: stable@vger.kernel.org
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xi Ruoyao <xry111@xry111.site>
Date: Fri Jun 21 10:18:40 2024 +0800
LoongArch: Only allow OBJTOOL & ORC unwinder if toolchain supports -mthin-add-sub
[ Upstream commit 120dd4118e58dbda2ddb1dcf55f3c56cdfe8cee0 ]
GAS <= 2.41 does not support generating R_LARCH_{32,64}_PCREL for
"label - ." and it generates R_LARCH_{ADD,SUB}{32,64} pairs instead.
Objtool cannot handle R_LARCH_{ADD,SUB}{32,64} pair in __jump_table
(static key implementation) and etc. so it will produce some warnings.
This is causing the kernel CI systems to complain everywhere.
For GAS we can check if -mthin-add-sub option is available to know if
R_LARCH_{32,64}_PCREL are supported.
For Clang, we require Clang >= 18 and Clang >= 17 already supports
R_LARCH_{32,64}_PCREL. But unfortunately Clang has some other issues,
so we disable objtool for Clang at present.
Note that __jump_table here is not generated by the compiler, so
-fno-jump-table is completely irrelevant for this issue.
Fixes: cb8a2ef0848c ("LoongArch: Add ORC stack unwinder support")
Closes: https://lore.kernel.org/loongarch/Zl5m1ZlVmGKitAof@yujie-X299/
Closes: https://lore.kernel.org/loongarch/ZlY1gDDPi_mNrwJ1@slm.duckdns.org/
Closes: https://lore.kernel.org/loongarch/1717478006.038663-1-hengqi@linux.alibaba.com/
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=816029e06768
Link: https://github.com/llvm/llvm-project/commit/42cb3c6346fc
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hui Li <lihui@loongson.cn>
Date: Fri Jun 21 10:18:40 2024 +0800
LoongArch: Trigger user-space watchpoints correctly
commit c8e57ab0995c5b443d3c81c8a36b588776dcd0c3 upstream.
In the current code, gdb can set the watchpoint successfully through
ptrace interface, but watchpoint will not be triggered.
When debugging the following code using gdb.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
a = 1;
printf("a = %d\n", a);
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) watch a
...
(gdb) r
...
a = 1
[Inferior 1 (process 4650) exited normally]
No watchpoints were triggered, the root causes are:
1. Kernel uses perf_event and hw_breakpoint framework to control
watchpoint, but the perf_event corresponding to watchpoint is
not enabled. So it needs to be enabled according to MWPnCFG3
or FWPnCFG3 PLV bit field in ptrace_hbp_set_ctrl(), and privilege
is set according to the monitored addr in hw_breakpoint_control().
Furthermore, add a judgment in ptrace_hbp_set_addr() to ensure
kernel-space addr cannot be monitored in user mode.
2. The global enable control for all watchpoints is the WE bit of
CSR.CRMD, and hardware sets the value to 0 when an exception is
triggered. When the ERTN instruction is executed to return, the
hardware restores the value of the PWE field of CSR.PRMD here.
So, before a thread containing watchpoints be scheduled, the PWE
field of CSR.PRMD needs to be set to 1. Add this modification in
hw_breakpoint_control().
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#basic-control-and-status-registers
With this patch:
lihui@bogon:~$ gdb test
...
(gdb) watch a
Hardware watchpoint 1: a
(gdb) r
...
Hardware watchpoint 1: a
Old value = 0
New value = 1
main () at test.c:6
6 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
[Inferior 1 (process 775) exited normally]
Cc: stable@vger.kernel.org
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ricardo Ribalda <ribalda@chromium.org>
Date: Wed May 1 14:08:13 2024 +0100
media: intel/ipu6: Fix build with !ACPI
[ Upstream commit 8810e055b57543f3465cf3c15ba4980f9f14a84e ]
Modify the code so it can be compiled tested in configurations that do
not have ACPI enabled.
It fixes the following errors:
drivers/media/pci/intel/ipu-bridge.c:103:30: error: implicit declaration of function ‘acpi_device_handle’; did you mean ‘acpi_fwnode_handle’? [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:103:30: warning: initialization of ‘acpi_handle’ {aka ‘void *’} from ‘int’ makes pointer from integer without a cast [-Wint-conversion]
drivers/media/pci/intel/ipu-bridge.c:110:17: error: implicit declaration of function ‘for_each_acpi_dev_match’ [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:110:74: error: expected ‘;’ before ‘for_each_acpi_consumer_dev’
drivers/media/pci/intel/ipu-bridge.c:104:29: warning: unused variable ‘consumer’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:103:21: warning: unused variable ‘handle’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:166:38: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:185:43: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:191:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:196:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:202:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:223:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:236:18: error: implicit declaration of function ‘acpi_get_physical_device_location’ [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:236:56: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:238:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:256:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:275:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:280:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:469:26: error: implicit declaration of function ‘acpi_device_hid’; did you mean ‘dmi_device_id’? [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:468:74: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘int’ [-Wformat=]
drivers/media/pci/intel/ipu-bridge.c:637:58: error: expected ‘;’ before ‘{’ token
drivers/media/pci/intel/ipu-bridge.c:696:1: warning: label ‘err_put_adev’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:693:1: warning: label ‘err_put_ivsc’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:691:1: warning: label ‘err_free_swnodes’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:632:40: warning: unused variable ‘primary’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:632:31: warning: unused variable ‘fwnode’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:733:73: error: expected ‘;’ before ‘{’ token
drivers/media/pci/intel/ipu-bridge.c:725:24: warning: unused variable ‘csi_dev’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:724:43: warning: unused variable ‘adev’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:599:12: warning: ‘ipu_bridge_instantiate_ivsc’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:444:13: warning: ‘ipu_bridge_create_connection_swnodes’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:297:13: warning: ‘ipu_bridge_create_fwnode_properties’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:155:12: warning: ‘ipu_bridge_check_ivsc_dev’ defined but not used [-Wunused-function]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fullway Wang <fullwaywang@outlook.com>
Date: Thu Jan 18 02:35:06 2024 +0000
media: mtk-vcodec: potential null pointer deference in SCP
[ Upstream commit 53dbe08504442dc7ba4865c09b3bbf5fe849681b ]
The return value of devm_kzalloc() needs to be checked to avoid
NULL pointer deference. This is similar to CVE-2022-3113.
Link: https://lore.kernel.org/linux-media/PH7PR20MB5925094DAE3FD750C7E39E01BF712@PH7PR20MB5925.namprd20.prod.outlook.com
Signed-off-by: Fullway Wang <fullwaywang@outlook.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christian Marangi <ansuelsmth@gmail.com>
Date: Tue Jun 11 13:35:33 2024 +0200
mips: bmips: BCM6358: make sure CBR is correctly set
[ Upstream commit ce5cdd3b05216b704a704f466fb4c2dff3778caf ]
It was discovered that some device have CBR address set to 0 causing
kernel panic when arch_sync_dma_for_cpu_all is called.
This was notice in situation where the system is booted from TP1 and
BMIPS_GET_CBR() returns 0 instead of a valid address and
!!(read_c0_brcm_cmt_local() & (1 << 31)); not failing.
The current check whether RAC flush should be disabled or not are not
enough hence lets check if CBR is a valid address or not.
Fixes: ab327f8acdf8 ("mips: bmips: BCM6358: disable RAC flush for TP1")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiaxun Yang <jiaxun.yang@flygoat.com>
Date: Sun Jun 16 14:25:02 2024 +0100
MIPS: mipsmtregs: Fix target register for MFTC0
commit 4a3e37b3caea817199757a0b13aa53dd7c9376c8 upstream.
Target register of mftc0 should be __res instead of $1, this is
a leftover from old .insn code.
Fixes: dd6d29a61489 ("MIPS: Implement microMIPS MT ASE helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Songyang Li <leesongyang@outlook.com>
Date: Wed Mar 20 23:22:00 2024 +0800
MIPS: Octeon: Add PCIe link status check
[ Upstream commit 29b83a64df3b42c88c0338696feb6fdcd7f1f3b7 ]
The standard PCIe configuration read-write interface is used to
access the configuration space of the peripheral PCIe devices
of the mips processor after the PCIe link surprise down, it can
generate kernel panic caused by "Data bus error". So it is
necessary to add PCIe link status check for system protection.
When the PCIe link is down or in training, assigning a value
of 0 to the configuration address can prevent read-write behavior
to the configuration space of peripheral PCIe devices, thereby
preventing kernel panic.
Signed-off-by: Songyang Li <leesongyang@outlook.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Wed May 8 15:07:00 2024 +0300
MIPS: Routerboard 532: Fix vendor retry check code
[ Upstream commit ae9daffd9028f2500c9ac1517e46d4f2b57efb80 ]
read_config_dword() contains strange condition checking ret for a
number of values. The ret variable, however, is always zero because
config_access() never returns anything else. Thus, the retry is always
taken until number of tries is exceeded.
The code looks like it wants to check *val instead of ret to see if the
read gave an error response.
Fixes: 73b4390fb234 ("[MIPS] Routerboard 532: Support for base system")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Xu <peterx@redhat.com>
Date: Wed Jun 5 17:21:46 2024 -0400
mm/page_table_check: fix crash on ZONE_DEVICE
commit 8bb592c2eca8fd2bc06db7d80b38da18da4a2f43 upstream.
Not all pages may apply to pgtable check. One example is ZONE_DEVICE
pages: they map PFNs directly, and they don't allocate page_ext at all
even if there's struct page around. One may reference
devm_memremap_pages().
When both ZONE_DEVICE and page-table-check enabled, then try to map some
dax memories, one can trigger kernel bug constantly now when the kernel
was trying to inject some pfn maps on the dax device:
kernel BUG at mm/page_table_check.c:55!
While it's pretty legal to use set_pxx_at() for ZONE_DEVICE pages for page
fault resolutions, skip all the checks if page_ext doesn't even exist in
pgtable checker, which applies to ZONE_DEVICE but maybe more.
Link: https://lkml.kernel.org/r/20240605212146.994486-1-peterx@redhat.com
Fixes: df4e817b7108 ("mm: page table check")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Date: Fri Jun 7 17:40:48 2024 +0800
mm: huge_memory: fix misused mapping_large_folio_support() for anon folios
commit 6a50c9b512f7734bc356f4bd47885a6f7c98491a upstream.
When I did a large folios split test, a WARNING "[ 5059.122759][ T166]
Cannot split file folio to non-0 order" was triggered. But the test cases
are only for anonmous folios. while mapping_large_folio_support() is only
reasonable for page cache folios.
In split_huge_page_to_list_to_order(), the folio passed to
mapping_large_folio_support() maybe anonmous folio. The folio_test_anon()
check is missing. So the split of the anonmous THP is failed. This is
also the same for shmem_mapping(). We'd better add a check for both. But
the shmem_mapping() in __split_huge_page() is not involved, as for
anonmous folios, the end parameter is set to -1, so (head[i].index >= end)
is always false. shmem_mapping() is not called.
Also add a VM_WARN_ON_ONCE() in mapping_large_folio_support() for anon
mapping, So we can detect the wrong use more easily.
THP folios maybe exist in the pagecache even the file system doesn't
support large folio, it is because when CONFIG_TRANSPARENT_HUGEPAGE is
enabled, khugepaged will try to collapse read-only file-backed pages to
THP. But the mapping does not actually support multi order large folios
properly.
Using /sys/kernel/debug/split_huge_pages to verify this, with this patch,
large anon THP is successfully split and the warning is ceased.
Link: https://lkml.kernel.org/r/202406071740485174hcFl7jRxncsHDtI-Pz-o@zte.com.cn
Fixes: c010d47f107f ("mm: thp: split huge page to any lower order pages")
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rafael Aquini <aquini@redhat.com>
Date: Thu Jun 6 14:06:22 2024 -0400
mm: mmap: allow for the maximum number of bits for randomizing mmap_base by default
commit 3afb76a66b5559a7b595155803ce23801558a7a9 upstream.
An ASLR regression was noticed [1] and tracked down to file-mapped areas
being backed by THP in recent kernels. The 21-bit alignment constraint
for such mappings reduces the entropy for randomizing the placement of
64-bit library mappings and breaks ASLR completely for 32-bit libraries.
The reported issue is easily addressed by increasing vm.mmap_rnd_bits and
vm.mmap_rnd_compat_bits. This patch just provides a simple way to set
ARCH_MMAP_RND_BITS and ARCH_MMAP_RND_COMPAT_BITS to their maximum values
allowed by the architecture at build time.
[1] https://zolutal.github.io/aslrnt/
[akpm@linux-foundation.org: default to `y' if 32-bit, per Rafael]
Link: https://lkml.kernel.org/r/20240606180622.102099-1-aquini@redhat.com
Fixes: 1854bc6e2420 ("mm/readahead: Align file mappings for non-DAX")
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Baolin Wang <baolin.wang@linux.alibaba.com>
Date: Thu Jun 13 16:21:19 2024 +0800
mm: shmem: fix getting incorrect lruvec when replacing a shmem folio
commit 9094b4a1c76cfe84b906cc152bab34d4ba26fa5c upstream.
When testing shmem swapin, I encountered the warning below on my machine.
The reason is that replacing an old shmem folio with a new one causes
mem_cgroup_migrate() to clear the old folio's memcg data. As a result,
the old folio cannot get the correct memcg's lruvec needed to remove
itself from the LRU list when it is being freed. This could lead to
possible serious problems, such as LRU list crashes due to holding the
wrong LRU lock, and incorrect LRU statistics.
To fix this issue, we can fallback to use the mem_cgroup_replace_folio()
to replace the old shmem folio.
[ 5241.100311] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5d9960
[ 5241.100317] head: order:4 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 5241.100319] flags: 0x17fffe0000040068(uptodate|lru|head|swapbacked|node=0|zone=2|lastcpupid=0x3ffff)
[ 5241.100323] raw: 17fffe0000040068 fffffdffd6687948 fffffdffd69ae008 0000000000000000
[ 5241.100325] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 5241.100326] head: 17fffe0000040068 fffffdffd6687948 fffffdffd69ae008 0000000000000000
[ 5241.100327] head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 5241.100328] head: 17fffe0000000204 fffffdffd6665801 ffffffffffffffff 0000000000000000
[ 5241.100329] head: 0000000a00000010 0000000000000000 00000000ffffffff 0000000000000000
[ 5241.100330] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled())
[ 5241.100338] ------------[ cut here ]------------
[ 5241.100339] WARNING: CPU: 19 PID: 78402 at include/linux/memcontrol.h:775 folio_lruvec_lock_irqsave+0x140/0x150
[...]
[ 5241.100374] pc : folio_lruvec_lock_irqsave+0x140/0x150
[ 5241.100375] lr : folio_lruvec_lock_irqsave+0x138/0x150
[ 5241.100376] sp : ffff80008b38b930
[...]
[ 5241.100398] Call trace:
[ 5241.100399] folio_lruvec_lock_irqsave+0x140/0x150
[ 5241.100401] __page_cache_release+0x90/0x300
[ 5241.100404] __folio_put+0x50/0x108
[ 5241.100406] shmem_replace_folio+0x1b4/0x240
[ 5241.100409] shmem_swapin_folio+0x314/0x528
[ 5241.100411] shmem_get_folio_gfp+0x3b4/0x930
[ 5241.100412] shmem_fault+0x74/0x160
[ 5241.100414] __do_fault+0x40/0x218
[ 5241.100417] do_shared_fault+0x34/0x1b0
[ 5241.100419] do_fault+0x40/0x168
[ 5241.100420] handle_pte_fault+0x80/0x228
[ 5241.100422] __handle_mm_fault+0x1c4/0x440
[ 5241.100424] handle_mm_fault+0x60/0x1f0
[ 5241.100426] do_page_fault+0x120/0x488
[ 5241.100429] do_translation_fault+0x4c/0x68
[ 5241.100431] do_mem_abort+0x48/0xa0
[ 5241.100434] el0_da+0x38/0xc0
[ 5241.100436] el0t_64_sync_handler+0x68/0xc0
[ 5241.100437] el0t_64_sync+0x14c/0x150
[ 5241.100439] ---[ end trace 0000000000000000 ]---
[baolin.wang@linux.alibaba.com: remove less helpful comments, per Matthew]
Link: https://lkml.kernel.org/r/ccad3fe1375b468ebca3227b6b729f3eaf9d8046.1718423197.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/3c11000dd6c1df83015a8321a859e9775ebbc23e.1718266112.git.baolin.wang@linux.alibaba.com
Fixes: 85ce2c517ade ("memcontrol: only transfer the memcg data for migration")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bart Van Assche <bvanassche@acm.org>
Date: Fri May 10 13:23:13 2024 -0700
nbd: Fix signal handling
[ Upstream commit e56d4b633fffea9510db468085bed0799cba4ecd ]
Both nbd_send_cmd() and nbd_handle_cmd() return either a negative error
number or a positive blk_status_t value. nbd_queue_rq() converts these
return values into a blk_status_t value. There is a bug in the conversion
code: if nbd_send_cmd() returns BLK_STS_RESOURCE, nbd_queue_rq() should
return BLK_STS_RESOURCE instead of BLK_STS_OK. Fix this, move the
conversion code into nbd_handle_cmd() and fix the remaining sparse warnings.
This patch fixes the following sparse warnings:
drivers/block/nbd.c:673:32: warning: incorrect type in return expression (different base types)
drivers/block/nbd.c:673:32: expected int
drivers/block/nbd.c:673:32: got restricted blk_status_t [usertype]
drivers/block/nbd.c:714:48: warning: incorrect type in return expression (different base types)
drivers/block/nbd.c:714:48: expected int
drivers/block/nbd.c:714:48: got restricted blk_status_t [usertype]
drivers/block/nbd.c:1120:21: warning: incorrect type in assignment (different base types)
drivers/block/nbd.c:1120:21: expected int [assigned] ret
drivers/block/nbd.c:1120:21: got restricted blk_status_t [usertype]
drivers/block/nbd.c:1125:16: warning: incorrect type in return expression (different base types)
drivers/block/nbd.c:1125:16: expected restricted blk_status_t
drivers/block/nbd.c:1125:16: got int [assigned] ret
Cc: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Markus Pargmann <mpa@pengutronix.de>
Fixes: fc17b6534eb8 ("blk-mq: switch ->queue_rq return value to blk_status_t")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240510202313.25209-6-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bart Van Assche <bvanassche@acm.org>
Date: Fri May 10 13:23:11 2024 -0700
nbd: Improve the documentation of the locking assumptions
[ Upstream commit 2a6751e052ab4789630bc889c814037068723bc1 ]
Document locking assumptions with lockdep_assert_held() instead of source
code comments. The advantage of lockdep_assert_held() is that it is
verified at runtime if lockdep is enabled in the kernel config.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240510202313.25209-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: e56d4b633fff ("nbd: Fix signal handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Ruth <druth@chromium.org>
Date: Fri Jun 14 19:03:26 2024 +0000
net/sched: act_api: fix possible infinite loop in tcf_idr_check_alloc()
[ Upstream commit d864319871b05fadd153e0aede4811ca7008f5d6 ]
syzbot found hanging tasks waiting on rtnl_lock [1]
A reproducer is available in the syzbot bug.
When a request to add multiple actions with the same index is sent, the
second request will block forever on the first request. This holds
rtnl_lock, and causes tasks to hang.
Return -EAGAIN to prevent infinite looping, while keeping documented
behavior.
[1]
INFO: task kworker/1:0:5088 blocked for more than 143 seconds.
Not tainted 6.9.0-rc4-syzkaller-00173-g3cdb45594619 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:0 state:D stack:23744 pid:5088 tgid:5088 ppid:2 flags:0x00004000
Workqueue: events_power_efficient reg_check_chans_work
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5409 [inline]
__schedule+0xf15/0x5d00 kernel/sched/core.c:6746
__schedule_loop kernel/sched/core.c:6823 [inline]
schedule+0xe7/0x350 kernel/sched/core.c:6838
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:6895
__mutex_lock_common kernel/locking/mutex.c:684 [inline]
__mutex_lock+0x5b8/0x9c0 kernel/locking/mutex.c:752
wiphy_lock include/net/cfg80211.h:5953 [inline]
reg_leave_invalid_chans net/wireless/reg.c:2466 [inline]
reg_check_chans_work+0x10a/0x10e0 net/wireless/reg.c:2481
Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action")
Reported-by: syzbot+b87c222546179f4513a7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b87c222546179f4513a7
Signed-off-by: David Ruth <druth@chromium.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240614190326.1349786-1-druth@chromium.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Davide Caratti <dcaratti@redhat.com>
Date: Thu Apr 18 15:50:11 2024 +0200
net/sched: fix false lockdep warning on qdisc root lock
[ Upstream commit af0cb3fa3f9ed258d14abab0152e28a0f9593084 ]
Xiumei and Christoph reported the following lockdep splat, complaining of
the qdisc root lock being taken twice:
============================================
WARNING: possible recursive locking detected
6.7.0-rc3+ #598 Not tainted
--------------------------------------------
swapper/2/0 is trying to acquire lock:
ffff888177190110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
but task is already holding lock:
ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&sch->q.lock);
lock(&sch->q.lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by swapper/2/0:
#0: ffff888135a09d98 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x11a/0x510
#1: ffffffffaaee5260 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x2c0/0x1ed0
#2: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
#3: ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
#4: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
stack backtrace:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.7.0-rc3+ #598
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x4a/0x80
__lock_acquire+0xfdd/0x3150
lock_acquire+0x1ca/0x540
_raw_spin_lock+0x34/0x80
__dev_queue_xmit+0x1560/0x2e70
tcf_mirred_act+0x82e/0x1260 [act_mirred]
tcf_action_exec+0x161/0x480
tcf_classify+0x689/0x1170
prio_enqueue+0x316/0x660 [sch_prio]
dev_qdisc_enqueue+0x46/0x220
__dev_queue_xmit+0x1615/0x2e70
ip_finish_output2+0x1218/0x1ed0
__ip_finish_output+0x8b3/0x1350
ip_output+0x163/0x4e0
igmp_ifc_timer_expire+0x44b/0x930
call_timer_fn+0x1a2/0x510
run_timer_softirq+0x54d/0x11a0
__do_softirq+0x1b3/0x88f
irq_exit_rcu+0x18f/0x1e0
sysvec_apic_timer_interrupt+0x6f/0x90
</IRQ>
This happens when TC does a mirred egress redirect from the root qdisc of
device A to the root qdisc of device B. As long as these two locks aren't
protecting the same qdisc, they can be acquired in chain: add a per-qdisc
lockdep key to silence false warnings.
This dynamic key should safely replace the static key we have in sch_htb:
it was added to allow enqueueing to the device "direct qdisc" while still
holding the qdisc root lock.
v2: don't use static keys anymore in HTB direct qdiscs (thanks Eric Dumazet)
CC: Maxim Mikityanskiy <maxim@isovalent.com>
CC: Xiumei Mu <xmu@redhat.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/451
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7dc06d6158f72053cf877a82e2a7a5bd23692faa.1713448007.git.dcaratti@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Davide Caratti <dcaratti@redhat.com>
Date: Tue Apr 30 19:11:13 2024 +0200
net/sched: unregister lockdep keys in qdisc_create/qdisc_alloc error path
commit 86735b57c905e775f05de995df35379366b72168 upstream.
Naresh and Eric report several errors (corrupted elements in the dynamic
key hash list), when running tdc.py or syzbot. The error path of
qdisc_alloc() and qdisc_create() frees the qdisc memory, but it forgets
to unregister the lockdep key, thus causing use-after-free like the
following one:
==================================================================
BUG: KASAN: slab-use-after-free in lockdep_register_key+0x5f2/0x700
Read of size 8 at addr ffff88811236f2a8 by task ip/7925
CPU: 26 PID: 7925 Comm: ip Kdump: loaded Not tainted 6.9.0-rc2+ #648
Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013
Call Trace:
<TASK>
dump_stack_lvl+0x7c/0xc0
print_report+0xc9/0x610
kasan_report+0x89/0xc0
lockdep_register_key+0x5f2/0x700
qdisc_alloc+0x21d/0xb60
qdisc_create_dflt+0x63/0x3c0
attach_one_default_qdisc.constprop.37+0x8e/0x170
dev_activate+0x4bd/0xc30
__dev_open+0x275/0x380
__dev_change_flags+0x3f1/0x570
dev_change_flags+0x7c/0x160
do_setlink+0x1ea1/0x34b0
__rtnl_newlink+0x8c9/0x1510
rtnl_newlink+0x61/0x90
rtnetlink_rcv_msg+0x2f0/0xbc0
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x420/0x630
netlink_sendmsg+0x732/0xbc0
__sock_sendmsg+0x1ea/0x280
____sys_sendmsg+0x5a9/0x990
___sys_sendmsg+0xf1/0x180
__sys_sendmsg+0xd3/0x180
do_syscall_64+0x96/0x180
entry_SYSCALL_64_after_hwframe+0x71/0x79
RIP: 0033:0x7f9503f4fa07
Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007fff6c729068 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000006630c681 RCX: 00007f9503f4fa07
RDX: 0000000000000000 RSI: 00007fff6c7290d0 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000078
R10: 000000000000009b R11: 0000000000000246 R12: 0000000000000001
R13: 00007fff6c729180 R14: 0000000000000000 R15: 000055bf67dd9040
</TASK>
Allocated by task 7745:
kasan_save_stack+0x1c/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0x7b/0x90
__kmalloc_node+0x1ff/0x460
qdisc_alloc+0xae/0xb60
qdisc_create+0xdd/0xfb0
tc_modify_qdisc+0x37e/0x1960
rtnetlink_rcv_msg+0x2f0/0xbc0
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x420/0x630
netlink_sendmsg+0x732/0xbc0
__sock_sendmsg+0x1ea/0x280
____sys_sendmsg+0x5a9/0x990
___sys_sendmsg+0xf1/0x180
__sys_sendmsg+0xd3/0x180
do_syscall_64+0x96/0x180
entry_SYSCALL_64_after_hwframe+0x71/0x79
Freed by task 7745:
kasan_save_stack+0x1c/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x36/0x60
__kasan_slab_free+0xfe/0x180
kfree+0x113/0x380
qdisc_create+0xafb/0xfb0
tc_modify_qdisc+0x37e/0x1960
rtnetlink_rcv_msg+0x2f0/0xbc0
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x420/0x630
netlink_sendmsg+0x732/0xbc0
__sock_sendmsg+0x1ea/0x280
____sys_sendmsg+0x5a9/0x990
___sys_sendmsg+0xf1/0x180
__sys_sendmsg+0xd3/0x180
do_syscall_64+0x96/0x180
entry_SYSCALL_64_after_hwframe+0x71/0x79
Fix this ensuring that lockdep_unregister_key() is called before the
qdisc struct is freed, also in the error path of qdisc_create() and
qdisc_alloc().
Fixes: af0cb3fa3f9e ("net/sched: fix false lockdep warning on qdisc root lock")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/netdev/20240429221706.1492418-1-naresh.kamboju@linaro.org/
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/2aa1ca0c0a3aa0acc15925c666c777a4b5de553c.1714496886.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Safonov <0x7f454c46@gmail.com>
Date: Wed Jun 19 01:29:04 2024 +0100
net/tcp_ao: Don't leak ao_info on error-path
commit f9ae848904289ddb16c7c9e4553ed4c64300de49 upstream.
It seems I introduced it together with TCP_AO_CMDF_AO_REQUIRED, on
version 5 [1] of TCP-AO patches. Quite frustrative that having all these
selftests that I've written, running kmemtest & kcov was always in todo.
[1]: https://lore.kernel.org/netdev/20230215183335.800122-5-dima@arista.com/
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240617072451.1403e1d2@kernel.org/
Fixes: 0aadc73995d0 ("net/tcp: Prevent TCP-MD5 with TCP-AO being set")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240619-tcp-ao-required-leak-v1-1-6408f3c94247@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ignat Korchagin <ignat@cloudflare.com>
Date: Mon Jun 17 22:02:05 2024 +0100
net: do not leave a dangling sk pointer, when socket creation fails
commit 6cd4a78d962bebbaf8beb7d2ead3f34120e3f7b2 upstream.
It is possible to trigger a use-after-free by:
* attaching an fentry probe to __sock_release() and the probe calling the
bpf_get_socket_cookie() helper
* running traceroute -I 1.1.1.1 on a freshly booted VM
A KASAN enabled kernel will log something like below (decoded and stripped):
==================================================================
BUG: KASAN: slab-use-after-free in __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29)
Read of size 8 at addr ffff888007110dd8 by task traceroute/299
CPU: 2 PID: 299 Comm: traceroute Tainted: G E 6.10.0-rc2+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1))
print_report (mm/kasan/report.c:378 mm/kasan/report.c:488)
? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29)
kasan_report (mm/kasan/report.c:603)
? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29)
kasan_check_range (mm/kasan/generic.c:183 mm/kasan/generic.c:189)
__sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29)
bpf_get_socket_ptr_cookie (./arch/x86/include/asm/preempt.h:94 ./include/linux/sock_diag.h:42 net/core/filter.c:5094 net/core/filter.c:5092)
bpf_prog_875642cf11f1d139___sock_release+0x6e/0x8e
bpf_trampoline_6442506592+0x47/0xaf
__sock_release (net/socket.c:652)
__sock_create (net/socket.c:1601)
...
Allocated by task 299 on cpu 2 at 78.328492s:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:68)
__kasan_slab_alloc (mm/kasan/common.c:312 mm/kasan/common.c:338)
kmem_cache_alloc_noprof (mm/slub.c:3941 mm/slub.c:4000 mm/slub.c:4007)
sk_prot_alloc (net/core/sock.c:2075)
sk_alloc (net/core/sock.c:2134)
inet_create (net/ipv4/af_inet.c:327 net/ipv4/af_inet.c:252)
__sock_create (net/socket.c:1572)
__sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706)
__x64_sys_socket (net/socket.c:1718)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 299 on cpu 2 at 78.328502s:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:68)
kasan_save_free_info (mm/kasan/generic.c:582)
poison_slab_object (mm/kasan/common.c:242)
__kasan_slab_free (mm/kasan/common.c:256)
kmem_cache_free (mm/slub.c:4437 mm/slub.c:4511)
__sk_destruct (net/core/sock.c:2117 net/core/sock.c:2208)
inet_create (net/ipv4/af_inet.c:397 net/ipv4/af_inet.c:252)
__sock_create (net/socket.c:1572)
__sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706)
__x64_sys_socket (net/socket.c:1718)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Fix this by clearing the struct socket reference in sk_common_release() to cover
all protocol families create functions, which may already attached the
reference to the sk object with sock_init_data().
Fixes: c5dbb89fc2ac ("bpf: Expose bpf_get_socket_cookie to tracing programs")
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/20240613194047.36478-1-kuniyu@amazon.com/T/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240617210205.67311-1-ignat@cloudflare.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Date: Sat Apr 27 02:11:29 2024 -0300
net: dsa: realtek: do not assert reset on remove
[ Upstream commit 4f580e9aced1816398c1c64f178302a22b8ea6e2 ]
The necessity of asserting the reset on removal was previously
questioned, as DSA's own cleanup methods should suffice to prevent
traffic leakage[1].
When a driver has subdrivers controlled by devres, they will be
unregistered after the main driver's .remove is executed. If it asserts
a reset, the subdrivers will be unable to communicate with the hardware
during their cleanup. For LEDs, this means that they will fail to turn
off, resulting in a timeout error.
[1] https://lore.kernel.org/r/20240123215606.26716-9-luizluca@gmail.com/
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Date: Sat Apr 27 02:11:28 2024 -0300
net: dsa: realtek: keep default LED state in rtl8366rb
[ Upstream commit 5edc6585aafefa3d44fb8a84adf241d90227f7a3 ]
This switch family supports four LEDs for each of its six ports. Each
LED group is composed of one of these four LEDs from all six ports. LED
groups can be configured to display hardware information, such as link
activity, or manually controlled through a bitmap in registers
RTL8366RB_LED_0_1_CTRL_REG and RTL8366RB_LED_2_3_CTRL_REG.
After a reset, the default LED group configuration for groups 0 to 3
indicates, respectively, link activity, link at 1000M, 100M, and 10M, or
RTL8366RB_LED_CTRL_REG as 0x5432. These configurations are commonly used
for LED indications. However, the driver was replacing that
configuration to use manually controlled LEDs (RTL8366RB_LED_FORCE)
without providing a way for the OS to control them. The default
configuration is deemed more useful than fixed, uncontrollable turned-on
LEDs.
The driver was enabling/disabling LEDs during port_enable/disable.
However, these events occur when the port is administratively controlled
(up or down) and are not related to link presence. Additionally, when a
port N was disabled, the driver was turning off all LEDs for group N,
not only the corresponding LED for port N in any of those 4 groups. In
such cases, if port 0 was brought down, the LEDs for all ports in LED
group 0 would be turned off. As another side effect, the driver was
wrongly warning that port 5 didn't have an LED ("no LED for port 5").
Since showing the administrative state of ports is not an orthodox way
to use LEDs, it was not worth it to fix it and all this code was
dropped.
The code to disable LEDs was simplified only changing each LED group to
the RTL8366RB_LED_OFF state. Registers RTL8366RB_LED_0_1_CTRL_REG and
RTL8366RB_LED_2_3_CTRL_REG are only used when the corresponding LED
group is configured with RTL8366RB_LED_FORCE and they don't need to be
cleaned. The code still references an LED controlled by
RTL8366RB_INTERRUPT_CONTROL_REG, but as of now, no test device has
actually used it. Also, some magic numbers were replaced by macros.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Arinzon <darinzon@amazon.com>
Date: Sun May 12 13:46:35 2024 +0000
net: ena: Add validation for completion descriptors consistency
[ Upstream commit b37b98a3a0c1198bafe8c2d9ce0bc845b4e7a9a7 ]
Validate that `first` flag is set only for the first
descriptor in multi-buffer packets.
In case of an invalid descriptor, a reset will occur.
A new reset reason for RX data corruption has been added.
Signed-off-by: Shahar Itzko <itzko@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240512134637.25299-4-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Date: Fri Jun 14 22:41:55 2024 +0530
net: lan743x: disable WOL upon resume to restore full data path operation
[ Upstream commit 7725363936a88351b71495774c1e0e852ae4cdca ]
When Wake-on-LAN (WoL) is active and the system is in suspend mode, triggering
a system event can wake the system from sleep, which may block the data path.
To restore normal data path functionality after waking, disable all wake-up
events. Furthermore, clear all Write 1 to Clear (W1C) status bits by writing
1's to them.
Fixes: 4d94282afd95 ("lan743x: Add power management support")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Date: Fri Jun 14 22:41:56 2024 +0530
net: lan743x: Support WOL at both the PHY and MAC appropriately
[ Upstream commit 8c248cd836014339498486f14f435c0e344183a7 ]
Prevent options not supported by the PHY from being requested to it by the MAC
Whenever a WOL option is supported by both, the PHY is given priority
since that usually leads to better power savings.
Fixes: e9e13b6adc33 ("lan743x: fix for potential NULL pointer dereference with bare card")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Date: Thu Jun 13 14:49:00 2024 +1200
net: mvpp2: use slab_build_skb for oversized frames
[ Upstream commit 4467c09bc7a66a17ffd84d6262d48279b26106ea ]
Setting frag_size to 0 to indicate kmalloc has been deprecated,
use slab_build_skb directly.
Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()")
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240613024900.3842238-1-aryan.srivastava@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Oleksij Rempel <o.rempel@pengutronix.de>
Date: Fri Jun 14 11:45:16 2024 +0200
net: phy: dp83tg720: get master/slave configuration in link down state
commit 40a64cc9679540ff7c46ecc51178b07d42abbb1c upstream.
Get master/slave configuration for initial system start with the link in
down state. This ensures ethtool shows current configuration. Also
fixes link reconfiguration with ethtool while in down state, preventing
ethtool from displaying outdated configuration.
Even though dp83tg720_config_init() is executed periodically as long as
the link is in admin up state but no carrier is detected, this is not
sufficient for the link in admin down state where
dp83tg720_read_status() is not periodically executed. To cover this
case, we need an extra read role configuration in
dp83tg720_config_aneg().
Fixes: cb80ee2f9bee1 ("net: phy: Add support for the DP83TG720S Ethernet PHY")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240614094516.1481231-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oleksij Rempel <o.rempel@pengutronix.de>
Date: Fri Jun 14 11:45:15 2024 +0200
net: phy: dp83tg720: wake up PHYs in managed mode
commit cd6f12e173df44a20c2ac2ac110007dc14968088 upstream.
In case this PHY is bootstrapped for managed mode, we need to manually
wake it. Otherwise no link will be detected.
Cc: stable@vger.kernel.org
Fixes: cb80ee2f9bee1 ("net: phy: Add support for the DP83TG720S Ethernet PHY")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240614094516.1481231-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Date: Fri Jun 14 22:41:57 2024 +0530
net: phy: mxl-gpy: Remove interrupt mask clearing from config_init
[ Upstream commit c44d3ffd85db03ebcc3090e55589e10d5af9f3a9 ]
When the system resumes from sleep, the phy_init_hw() function invokes
config_init(), which clears all interrupt masks and causes wake events to be
lost in subsequent wake sequences. Remove interrupt mask clearing from
config_init() and preserve relevant masks in config_intr().
Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Golle <daniel@makrotopia.org>
Date: Tue Apr 23 11:00:25 2024 +0200
net: sfp: add quirk for ATS SFP-GE-T 1000Base-TX module
[ Upstream commit 0805d67bc0ef95411228e802f31975cfb7555056 ]
Add quirk for ATS SFP-GE-T 1000Base-TX module.
This copper module comes with broken TX_FAULT indicator which must be
ignored for it to work.
Co-authored-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[ rebased on top of net-next ]
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240423090025.29231-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marek Behún <kabel@kernel.org>
Date: Tue Apr 23 10:50:39 2024 +0200
net: sfp: enhance quirk for Fibrestore 2.5G copper SFP module
[ Upstream commit cd4a32e60061789676f7f018a94fcc9ec56732a0 ]
Enhance the quirk for Fibrestore 2.5G copper SFP module. The original
commit e27aca3760c0 ("net: sfp: add quirk for FS's 2.5G copper SFP")
introducing the quirk says that the PHY is inaccessible, but that is
not true.
The module uses Rollball protocol to talk to the PHY, and needs a 4
second wait before probing it, same as FS 10G module.
The PHY inside the module is Realtek RTL8221B-VB-CG PHY. The realtek
driver recently gained support to set it up via clause 45 accesses.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240423085039.26957-2-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Oleksij Rempel <o.rempel@pengutronix.de>
Date: Tue Jun 18 09:38:21 2024 +0200
net: stmmac: Assign configured channel value to EXTTS event
commit 8851346912a1fa33e7a5966fe51f07313b274627 upstream.
Assign the configured channel value to the EXTTS event in the timestamp
interrupt handler. Without assigning the correct channel, applications
like ts2phc will refuse to accept the event, resulting in errors such
as:
...
ts2phc[656.834]: config item end1.ts2phc.pin_index is 0
ts2phc[656.834]: config item end1.ts2phc.channel is 3
ts2phc[656.834]: config item end1.ts2phc.extts_polarity is 2
ts2phc[656.834]: config item end1.ts2phc.extts_correction is 0
...
ts2phc[656.862]: extts on unexpected channel
ts2phc[658.141]: extts on unexpected channel
ts2phc[659.140]: extts on unexpected channel
Fixes: f4da56529da60 ("net: stmmac: Add support for external trigger timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20240618073821.619751-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xiaolei Wang <xiaolei.wang@windriver.com>
Date: Mon Jun 17 09:39:22 2024 +0800
net: stmmac: No need to calculate speed divider when offload is disabled
[ Upstream commit b8c43360f6e424131fa81d3ba8792ad8ff25a09e ]
commit be27b8965297 ("net: stmmac: replace priv->speed with
the portTransmitRate from the tc-cbs parameters") introduced
a problem. When deleting, it prompts "Invalid portTransmitRate
0 (idleSlope - sendSlope)" and exits. Add judgment on cbs.enable.
Only when offload is enabled, speed divider needs to be calculated.
Fixes: be27b8965297 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240617013922.1035854-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Date: Mon Jun 17 12:28:21 2024 +0200
net: usb: ax88179_178a: improve reset check
commit 7be4cb7189f747b4e5b6977d0e4387bde3204e62 upstream.
After ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is
set to down/up") to not reset from usbnet_open after the reset from
usbnet_probe at initialization stage to speed up this, some issues have
been reported.
It seems to happen that if the initialization is slower, and some time
passes between the probe operation and the open operation, the second reset
from open is necessary too to have the device working. The reason is that
if there is no activity with the phy, this is "disconnected".
In order to improve this, the solution is to detect when the phy is
"disconnected", and we can use the phy status register for this. So we will
only reset the device from reset operation in this situation, that is, only
if necessary.
The same bahavior is happening when the device is stopped (link set to
down) and later is restarted (link set to up), so if the phy keeps working
we only need to enable the mac again, but if enough time passes between the
device stop and restart, reset is necessary, and we can detect the
situation checking the phy status register too.
cc: stable@vger.kernel.org # 6.6+
Fixes: ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is set to down/up")
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Reported-by: Antje Miederhöfer <a.miederhoefer@gmx.de>
Reported-by: Arne Fitzenreiter <arne_f@ipfire.org>
Tested-by: Yongqin Liu <yongqin.liu@linaro.org>
Tested-by: Antje Miederhöfer <a.miederhoefer@gmx.de>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oliver Neukum <oneukum@suse.com>
Date: Wed Jun 19 15:28:03 2024 +0200
net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
[ Upstream commit fba383985354e83474f95f36d7c65feb75dba19d ]
This functions retrieves values by passing a pointer. As the function
that retrieves them can fail before touching the pointers, the variables
must be initialized.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20240619132816.11526-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jakub Kicinski <kuba@kernel.org>
Date: Thu Jun 13 14:30:44 2024 -0700
netdev-genl: fix error codes when outputting XDP features
[ Upstream commit 7ed352d34f1a09a7659c53de07785115587499fe ]
-EINVAL will interrupt the dump. The correct error to return
if we have more data to dump is -EMSGSIZE.
Discovered by doing:
for i in `seq 80`; do ip link add type veth; done
./cli.py --dbg-small-recv 5300 --spec netdev.yaml --dump dev-get >> /dev/null
[...]
nl_len = 64 (48) nl_flags = 0x0 nl_type = 19
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
error: -22
Fixes: d3d854fd6a1d ("netdev-genl: create a simple family for netdev stuff")
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240613213044.3675745-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jozsef Kadlecsik <kadlec@netfilter.org>
Date: Mon Jun 17 11:18:15 2024 +0200
netfilter: ipset: Fix suspicious rcu_dereference_protected()
[ Upstream commit 8ecd06277a7664f4ef018abae3abd3451d64e7a6 ]
When destroying all sets, we are either in pernet exit phase or
are executing a "destroy all sets command" from userspace. The latter
was taken into account in ip_set_dereference() (nfnetlink mutex is held),
but the former was not. The patch adds the required check to
rcu_dereference_protected() in ip_set_dereference().
Fixes: 4e7aaa6b82d6 ("netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type")
Reported-by: syzbot+b62c37cdd58103293a5a@syzkaller.appspotmail.com
Reported-by: syzbot+cfbe1da5fdfc39efc293@syzkaller.appspotmail.com
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406141556.e0b6f17e-lkp@intel.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jianguo Wu <wujianguo@chinatelecom.cn>
Date: Thu Jun 13 17:42:47 2024 +0800
netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
[ Upstream commit a2225e0250c5fa397dcebf6ce65a9f05a114e0cf ]
Currently, the sysctl net.netfilter.nf_hooks_lwtunnel depends on the
nf_conntrack module, but the nf_conntrack module is not always loaded.
Therefore, accessing net.netfilter.nf_hooks_lwtunnel may have an error.
Move sysctl nf_hooks_lwtunnel into the netfilter core.
Fixes: 7a3f5b0de364 ("netfilter: add netfilter hooks to SRv6 data plane")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yue Haibing <yuehaibing@huawei.com>
Date: Fri Jun 14 21:13:02 2024 +0800
netns: Make get_net_ns() handle zero refcount net
[ Upstream commit ff960f9d3edbe08a736b5a224d91a305ccc946b0 ]
Syzkaller hit a warning:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 7890 at lib/refcount.c:25 refcount_warn_saturate+0xdf/0x1d0
Modules linked in:
CPU: 3 PID: 7890 Comm: tun Not tainted 6.10.0-rc3-00100-gcaa4f9578aba-dirty #310
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xdf/0x1d0
Code: 41 49 04 31 ff 89 de e8 9f 1e cd fe 84 db 75 9c e8 76 26 cd fe c6 05 b6 41 49 04 01 90 48 c7 c7 b8 8e 25 86 e8 d2 05 b5 fe 90 <0f> 0b 90 90 e9 79 ff ff ff e8 53 26 cd fe 0f b6 1
RSP: 0018:ffff8881067b7da0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff811c72ac
RDX: ffff8881026a2140 RSI: ffffffff811c72b5 RDI: 0000000000000001
RBP: ffff8881067b7db0 R08: 0000000000000000 R09: 205b5d3730353139
R10: 0000000000000000 R11: 205d303938375420 R12: ffff8881086500c4
R13: ffff8881086500c4 R14: ffff8881086500b0 R15: ffff888108650040
FS: 00007f5b2961a4c0(0000) GS:ffff88823bd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d7ed36fd18 CR3: 00000001482f6000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? show_regs+0xa3/0xc0
? __warn+0xa5/0x1c0
? refcount_warn_saturate+0xdf/0x1d0
? report_bug+0x1fc/0x2d0
? refcount_warn_saturate+0xdf/0x1d0
? handle_bug+0xa1/0x110
? exc_invalid_op+0x3c/0xb0
? asm_exc_invalid_op+0x1f/0x30
? __warn_printk+0xcc/0x140
? __warn_printk+0xd5/0x140
? refcount_warn_saturate+0xdf/0x1d0
get_net_ns+0xa4/0xc0
? __pfx_get_net_ns+0x10/0x10
open_related_ns+0x5a/0x130
__tun_chr_ioctl+0x1616/0x2370
? __sanitizer_cov_trace_switch+0x58/0xa0
? __sanitizer_cov_trace_const_cmp2+0x1c/0x30
? __pfx_tun_chr_ioctl+0x10/0x10
tun_chr_ioctl+0x2f/0x40
__x64_sys_ioctl+0x11b/0x160
x64_sys_call+0x1211/0x20d0
do_syscall_64+0x9e/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5b28f165d7
Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 8
RSP: 002b:00007ffc2b59c5e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5b28f165d7
RDX: 0000000000000000 RSI: 00000000000054e3 RDI: 0000000000000003
RBP: 00007ffc2b59c650 R08: 00007f5b291ed8c0 R09: 00007f5b2961a4c0
R10: 0000000029690010 R11: 0000000000000246 R12: 0000000000400730
R13: 00007ffc2b59cf40 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Kernel panic - not syncing: kernel: panic_on_warn set ...
This is trigger as below:
ns0 ns1
tun_set_iff() //dev is tun0
tun->dev = dev
//ip link set tun0 netns ns1
put_net() //ref is 0
__tun_chr_ioctl() //TUNGETDEVNETNS
net = dev_net(tun->dev);
open_related_ns(&net->ns, get_net_ns); //ns1
get_net_ns()
get_net() //addition on 0
Use maybe_get_net() in get_net_ns in case net's ref is zero to fix this
Fixes: 0c3e0e3bb623 ("tun: Add ioctl() TUNGETDEVNETNS cmd to allow obtaining real net ns of tun device")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20240614131302.2698509-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Breno Leitao <leitao@debian.org>
Date: Mon Apr 29 03:04:33 2024 -0700
netpoll: Fix race condition in netpoll_owner_active
[ Upstream commit c2e6a872bde9912f1a7579639c5ca3adf1003916 ]
KCSAN detected a race condition in netpoll:
BUG: KCSAN: data-race in net_rx_action / netpoll_send_skb
write (marked) to 0xffff8881164168b0 of 4 bytes by interrupt on cpu 10:
net_rx_action (./include/linux/netpoll.h:90 net/core/dev.c:6712 net/core/dev.c:6822)
<snip>
read to 0xffff8881164168b0 of 4 bytes by task 1 on cpu 2:
netpoll_send_skb (net/core/netpoll.c:319 net/core/netpoll.c:345 net/core/netpoll.c:393)
netpoll_send_udp (net/core/netpoll.c:?)
<snip>
value changed: 0x0000000a -> 0xffffffff
This happens because netpoll_owner_active() needs to check if the
current CPU is the owner of the lock, touching napi->poll_owner
non atomically. The ->poll_owner field contains the current CPU holding
the lock.
Use an atomic read to check if the poll owner is the current CPU.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240429100437.3487432-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Date: Thu Jun 13 08:23:00 2024 +0000
netrom: Fix a memory leak in nr_heartbeat_expiry()
[ Upstream commit 0b9130247f3b6a1122478471ff0e014ea96bb735 ]
syzbot reported a memory leak in nr_create() [0].
Commit 409db27e3a2e ("netrom: Fix use-after-free of a listening socket.")
added sock_hold() to the nr_heartbeat_expiry() function, where
a) a socket has a SOCK_DESTROY flag or
b) a listening socket has a SOCK_DEAD flag.
But in the case "a," when the SOCK_DESTROY flag is set, the file descriptor
has already been closed and the nr_release() function has been called.
So it makes no sense to hold the reference count because no one will
call another nr_destroy_socket() and put it as in the case "b."
nr_connect
nr_establish_data_link
nr_start_heartbeat
nr_release
switch (nr->state)
case NR_STATE_3
nr->state = NR_STATE_2
sock_set_flag(sk, SOCK_DESTROY);
nr_rx_frame
nr_process_rx_frame
switch (nr->state)
case NR_STATE_2
nr_state2_machine()
nr_disconnect()
nr_sk(sk)->state = NR_STATE_0
sock_set_flag(sk, SOCK_DEAD)
nr_heartbeat_expiry
switch (nr->state)
case NR_STATE_0
if (sock_flag(sk, SOCK_DESTROY) ||
(sk->sk_state == TCP_LISTEN
&& sock_flag(sk, SOCK_DEAD)))
sock_hold() // ( !!! )
nr_destroy_socket()
To fix the memory leak, let's call sock_hold() only for a listening socket.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
[0]: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16
Reported-by: syzbot+d327a1f3b12e1e206c16@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16
Fixes: 409db27e3a2e ("netrom: Fix use-after-free of a listening socket.")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Joseph Qi <joseph.qi@linux.alibaba.com>
Date: Thu May 30 19:06:30 2024 +0800
ocfs2: fix NULL pointer dereference in ocfs2_abort_trigger()
commit 685d03c3795378fca6a1b3d43581f7f1a3fc095f upstream.
bdev->bd_super has been removed and commit 8887b94d9322 change the usage
from bdev->bd_super to b_assoc_map->host->i_sb. Since ocfs2 hasn't set
bh->b_assoc_map, it will trigger NULL pointer dereference when calling
into ocfs2_abort_trigger().
Actually this was pointed out in history, see commit 74e364ad1b13. But
I've made a mistake when reviewing commit 8887b94d9322 and then
re-introduce this regression.
Since we cannot revive bdev in buffer head, so fix this issue by
initializing all types of ocfs2 triggers when fill super, and then get the
specific ocfs2 trigger from ocfs2_caching_info when access journal.
[joseph.qi@linux.alibaba.com: v2]
Link: https://lkml.kernel.org/r/20240602112045.1112708-1-joseph.qi@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240530110630.3933832-2-joseph.qi@linux.alibaba.com
Fixes: 8887b94d9322 ("ocfs2: stop using bdev->bd_super for journal error logging")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Joseph Qi <joseph.qi@linux.alibaba.com>
Date: Thu May 30 19:06:29 2024 +0800
ocfs2: fix NULL pointer dereference in ocfs2_journal_dirty()
commit 58f7e1e2c9e72c7974054c64c3abeac81c11f822 upstream.
bdev->bd_super has been removed and commit 8887b94d9322 change the usage
from bdev->bd_super to b_assoc_map->host->i_sb. This introduces the
following NULL pointer dereference in ocfs2_journal_dirty() since
b_assoc_map is still not initialized. This can be easily reproduced by
running xfstests generic/186, which simulate no more credits.
[ 134.351592] BUG: kernel NULL pointer dereference, address: 0000000000000000
...
[ 134.355341] RIP: 0010:ocfs2_journal_dirty+0x14f/0x160 [ocfs2]
...
[ 134.365071] Call Trace:
[ 134.365312] <TASK>
[ 134.365524] ? __die_body+0x1e/0x60
[ 134.365868] ? page_fault_oops+0x13d/0x4f0
[ 134.366265] ? __pfx_bit_wait_io+0x10/0x10
[ 134.366659] ? schedule+0x27/0xb0
[ 134.366981] ? exc_page_fault+0x6a/0x140
[ 134.367356] ? asm_exc_page_fault+0x26/0x30
[ 134.367762] ? ocfs2_journal_dirty+0x14f/0x160 [ocfs2]
[ 134.368305] ? ocfs2_journal_dirty+0x13d/0x160 [ocfs2]
[ 134.368837] ocfs2_create_new_meta_bhs.isra.51+0x139/0x2e0 [ocfs2]
[ 134.369454] ocfs2_grow_tree+0x688/0x8a0 [ocfs2]
[ 134.369927] ocfs2_split_and_insert.isra.67+0x35c/0x4a0 [ocfs2]
[ 134.370521] ocfs2_split_extent+0x314/0x4d0 [ocfs2]
[ 134.371019] ocfs2_change_extent_flag+0x174/0x410 [ocfs2]
[ 134.371566] ocfs2_add_refcount_flag+0x3fa/0x630 [ocfs2]
[ 134.372117] ocfs2_reflink_remap_extent+0x21b/0x4c0 [ocfs2]
[ 134.372994] ? inode_update_timestamps+0x4a/0x120
[ 134.373692] ? __pfx_ocfs2_journal_access_di+0x10/0x10 [ocfs2]
[ 134.374545] ? __pfx_ocfs2_journal_access_di+0x10/0x10 [ocfs2]
[ 134.375393] ocfs2_reflink_remap_blocks+0xe4/0x4e0 [ocfs2]
[ 134.376197] ocfs2_remap_file_range+0x1de/0x390 [ocfs2]
[ 134.376971] ? security_file_permission+0x29/0x50
[ 134.377644] vfs_clone_file_range+0xfe/0x320
[ 134.378268] ioctl_file_clone+0x45/0xa0
[ 134.378853] do_vfs_ioctl+0x457/0x990
[ 134.379422] __x64_sys_ioctl+0x6e/0xd0
[ 134.379987] do_syscall_64+0x5d/0x170
[ 134.380550] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 134.381231] RIP: 0033:0x7fa4926397cb
[ 134.381786] Code: 73 01 c3 48 8b 0d bd 56 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8d 56 38 00 f7 d8 64 89 01 48
[ 134.383930] RSP: 002b:00007ffc2b39f7b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 134.384854] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fa4926397cb
[ 134.385734] RDX: 00007ffc2b39f7f0 RSI: 000000004020940d RDI: 0000000000000003
[ 134.386606] RBP: 0000000000000000 R08: 00111a82a4f015bb R09: 00007fa494221000
[ 134.387476] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 134.388342] R13: 0000000000f10000 R14: 0000558e844e2ac8 R15: 0000000000f10000
[ 134.389207] </TASK>
Fix it by only aborting transaction and journal in ocfs2_journal_dirty()
now, and leave ocfs2_abort() later when detecting an aborted handle,
e.g. start next transaction. Also log the handle details in this case.
Link: https://lkml.kernel.org/r/20240530110630.3933832-1-joseph.qi@linux.alibaba.com
Fixes: 8887b94d9322 ("ocfs2: stop using bdev->bd_super for journal error logging")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Simon Horman <horms@kernel.org>
Date: Mon Jun 17 17:50:26 2024 +0100
octeontx2-pf: Add error handling to VLAN unoffload handling
[ Upstream commit b95a4afe2defd6f46891985f9436a568cd35a31c ]
otx2_sq_append_skb makes used of __vlan_hwaccel_push_inside()
to unoffload VLANs - push them from skb meta data into skb data.
However, it omitts a check for __vlan_hwaccel_push_inside()
returning NULL.
Found by inspection based on [1] and [2].
Compile tested only.
[1] Re: [PATCH net-next v1] net: stmmac: Enable TSO on VLANs
https://lore.kernel.org/all/ZmrN2W8Fye450TKs@shell.armlinux.org.uk/
[2] Re: [PATCH net-next v2] net: stmmac: Enable TSO on VLANs
https://lore.kernel.org/all/CANn89i+11L5=tKsa7V7Aeyxaj6nYGRwy35PAbCRYJ73G+b25sg@mail.gmail.com/
Fixes: fd9d7859db6c ("octeontx2-pf: Implement ingress/egress VLAN offload")
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Geetha sowjanya <gakula@marvell.com>
Date: Tue Jun 18 11:41:22 2024 +0530
octeontx2-pf: Fix linking objects into multiple modules
[ Upstream commit 1062d03827b78614259b3b4b992deb27ee6aa84d ]
This patch fixes the below build warning messages that are
caused due to linking same files to multiple modules by
exporting the required symbols.
"scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile:
otx2_devlink.o is added to multiple modules: rvu_nicpf rvu_nicvf
scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile:
otx2_dcbnl.o is added to multiple modules: rvu_nicpf rvu_nicvf"
Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Viresh Kumar <viresh.kumar@linaro.org>
Date: Tue Apr 9 15:53:58 2024 +0530
OPP: Fix required_opp_tables for multiple genpds using same table
[ Upstream commit 2a56c462fe5a2ee61d38e2d7b772bee56115a00c ]
The required_opp_tables parsing is not perfect, as the OPP core does the
parsing solely based on the DT node pointers.
The core sets the required_opp_tables entry to the first OPP table in
the "opp_tables" list, that matches with the node pointer.
If the target DT OPP table is used by multiple devices and they all
create separate instances of 'struct opp_table' from it, then it is
possible that the required_opp_tables entry may be set to the incorrect
sibling device.
Unfortunately, there is no clear way to initialize the right values
during the initial parsing and we need to do this at a later point of
time.
Cross check the OPP table again while the genpds are attached and fix
them if required.
Also add a new API for the genpd core to fetch the device pointer for
the genpd.
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Reported-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218682
Co-developed-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miklos Szeredi <mszeredi@redhat.com>
Date: Fri Jun 14 09:55:58 2024 +0200
ovl: fix encoding fid for lower only root
commit 004b8d1491b4bcbb7da1a3206d1e7e66822d47c6 upstream.
ovl_check_encode_origin() should return a positive number if the lower
dentry is to be encoded, zero otherwise. If there's no upper layer at all
(read-only overlay), then it obviously needs to return positive.
This was broken by commit 16aac5ad1fa9 ("ovl: support encoding
non-decodable file handles"), which didn't take the lower-only
configuration into account.
Fix by checking the no-upper-layer case up-front.
Reported-and-tested-by: Youzhong Yang <youzhong@gmail.com>
Closes: https://lore.kernel.org/all/CADpNCvaBimi+zCYfRJHvCOhMih8OU0rmZkwLuh24MKKroRuT8Q@mail.gmail.com/
Fixes: 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles")
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Wed Apr 3 17:36:18 2024 +0800
padata: Disable BH when taking works lock on MT path
[ Upstream commit 58329c4312031603bb1786b44265c26d5065fe72 ]
As the old padata code can execute in softirq context, disable
softirqs for the new padata_do_mutithreaded code too as otherwise
lockdep will get antsy.
Reported-by: syzbot+0cb5bb0f4bf9e79db3b3@syzkaller.appspotmail.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Thu Mar 7 10:37:09 2024 -0600
PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports
[ Upstream commit 256df20c590bf0e4d63ac69330cf23faddac3e08 ]
Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge
system with a muxless AMD Radeon dGPU. Attempting to use the dGPU fails
with the following sequence:
ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
radeon 0000:01:00.0: not ready 1023ms after resume; waiting
radeon 0000:01:00.0: not ready 2047ms after resume; waiting
radeon 0000:01:00.0: not ready 4095ms after resume; waiting
radeon 0000:01:00.0: not ready 8191ms after resume; waiting
radeon 0000:01:00.0: not ready 16383ms after resume; waiting
radeon 0000:01:00.0: not ready 32767ms after resume; waiting
radeon 0000:01:00.0: not ready 65535ms after resume; giving up
radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
The issue is that the Root Port the dGPU is connected to can't handle the
transition from D3cold to D0 so the dGPU can't properly exit runtime PM.
The existing logic in pci_bridge_d3_possible() checks for systems that are
newer than 2015 to decide that D3 is safe. This would nominally work for
an Ivy Bridge system (which was discontinued in 2015), but this system
appears to have continued to receive BIOS updates until 2017 and so this
existing logic doesn't appropriately capture it.
Add the system to bridge_d3_blacklist to prevent D3cold from being used.
Link: https://lore.kernel.org/r/20240307163709.323-1-mario.limonciello@amd.com
Reported-by: Eric Heintzmann <heintzmann.eric@free.fr>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3229
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Eric Heintzmann <heintzmann.eric@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Thu Feb 8 15:23:21 2024 +0200
PCI: Do not wait for disconnected devices when resuming
[ Upstream commit 6613443ffc49d03e27f0404978f685c4eac43fba ]
On runtime resume, pci_dev_wait() is called:
pci_pm_runtime_resume()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
pci_dev_wait()
While a device is runtime suspended along with its PCI hierarchy, the
device could get disconnected. In such case, the link will not come up no
matter how long pci_dev_wait() waits for it.
Besides the above mentioned case, there could be other ways to get the
device disconnected while pci_dev_wait() is waiting for the link to come
up.
Make pci_dev_wait() exit if the device is already disconnected to avoid
unnecessary delay.
The use cases of pci_dev_wait() boil down to two:
1. Waiting for the device after reset
2. pci_bridge_wait_for_secondary_bus()
The callers in both cases seem to benefit from propagating the
disconnection as error even if device disconnection would be more
analoguous to the case where there is no device in the first place which
return 0 from pci_dev_wait(). In the case 2, it results in unnecessary
marking of the devices disconnected again but that is just harmless extra
work.
Also make sure compiler does not become too clever with dev->error_state
and use READ_ONCE() to force a fetch for the up-to-date value.
Link: https://lore.kernel.org/r/20240208132322.4811-1-ilpo.jarvinen@linux.intel.com
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Abel Vesa <abel.vesa@linaro.org>
Date: Mon May 27 10:20:36 2024 +0300
phy: qcom-qmp: pcs: Add missing v6 N4 register offsets
[ Upstream commit 99bf89626335bbec71d8461f0faec88551440850 ]
The new X1E80100 SoC bumps up the HW version of QMP phy to v6 N4 for
combo USB and DP PHY. Currently, the X1E80100 uses the pure V6 PCS
register offsets, which are different. Add the offsets so the
mentioned platform can be fixed later on. Add the new PCS offsets
in a dedicated header file.
Fixes: d7b3579f84f7 ("phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys")
Co-developed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-2-be8a0b882117@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Abel Vesa <abel.vesa@linaro.org>
Date: Mon May 27 10:20:35 2024 +0300
phy: qcom-qmp: qserdes-txrx: Add missing registers offsets
[ Upstream commit 5314e84c33e7ad61df5203df540626ac59f9dcd9 ]
Currently, the x1e80100 uses pure V6 register offsets for DP part of the
combo PHY. This hasn't been an issue because external DP is not yet
enabled on any of the boards yet. But in order to enabled it, all these
new V6 N4 register offsets are needed. So add them.
Fixes: 762c3565f3c8 ("phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets")
Co-developed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-1-be8a0b882117@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Abel Vesa <abel.vesa@linaro.org>
Date: Mon May 27 10:20:37 2024 +0300
phy: qcom: qmp-combo: Switch from V6 to V6 N4 register offsets
[ Upstream commit 163c1a356a847ab4767200fd4a45b3f8e4ddc900 ]
Currently, none of the X1E80100 supported boards upstream have enabled
DP. As for USB, the reason it is not broken when it's obvious that the
offsets are wrong is because the only difference with respect to USB is
the difference in register name. The V6 uses QPHY_V6_PCS_CDR_RESET_TIME
while V6 N4 uses QPHY_V6_N4_PCS_RX_CONFIG. Now, in order for the DP to
work, the DP serdes tables need to be added as they have different
values for V6 N4 when compared to V6 ones, even though they use the same
V6 offsets. While at it, switch swing and pre-emphasis tables to V6 as
well.
Fixes: d7b3579f84f7 ("phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys")
Co-developed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-3-be8a0b882117@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tzung-Bi Shih <tzungbi@kernel.org>
Date: Fri Mar 29 15:56:18 2024 +0800
platform/chrome: cros_usbpd_logger: provide ID table for avoiding fallback match
[ Upstream commit e0e59c5335a0a038058a080474c34fe04debff33 ]
Instead of using fallback driver name match, provide ID table[1] for the
primary match.
[1]: https://elixir.bootlin.com/linux/v6.8/source/drivers/base/platform.c#L1353
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240329075630.2069474-7-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tzung-Bi Shih <tzungbi@kernel.org>
Date: Fri Mar 29 15:56:19 2024 +0800
platform/chrome: cros_usbpd_notify: provide ID table for avoiding fallback match
[ Upstream commit 8ad3b9652ed6a115c56214a0eab06952818b3ddf ]
Instead of using fallback driver name match, provide ID table[1] for the
primary match.
[1]: https://elixir.bootlin.com/linux/v6.8/source/drivers/base/platform.c#L1353
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240329075630.2069474-8-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ben Fradella <bfradell@netapp.com>
Date: Thu May 9 16:49:34 2024 +0000
platform/x86: p2sb: Don't init until unassigned resources have been assigned
[ Upstream commit 2c6370e6607663fc5fa0fd9ed58e2e01014898c7 ]
The P2SB could get an invalid BAR from the BIOS, and that won't be fixed
up until pcibios_assign_resources(), which is an fs_initcall().
- Move p2sb_fs_init() to an fs_initcall_sync(). This is still early
enough to avoid a race with any dependent drivers.
- Add a check for IORESOURCE_UNSET in p2sb_valid_resource() to catch
unset BARs going forward.
- Return error values from p2sb_fs_init() so that the 'initcall_debug'
cmdline arg provides useful data.
Signed-off-by: Ben Fradella <bfradell@netapp.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240509164905.41016-1-bcfradella@proton.me
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arvid Norlander <lkml@vorpal.se>
Date: Wed Jan 31 12:16:41 2024 +0100
platform/x86: toshiba_acpi: Add quirk for buttons on Z830
[ Upstream commit 23f1d8b47d125dcd8c1ec62a91164e6bc5d691d0 ]
The Z830 has some buttons that will only work properly as "quickstart"
buttons. To enable them in that mode, a value between 1 and 7 must be
used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for
maximum predictability and compatibility.
As there is not yet a known way of auto detection, this patch uses a DMI
quirk table. A module parameter is exposed to allow setting this on other
models for testing.
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240131111641.4418-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Apr 6 14:50:57 2024 +0200
platform/x86: x86-android-tablets: Add Lenovo Yoga Tablet 2 Pro 1380F/L data
[ Upstream commit 3eee73ad42c3899d97e073bf2c41e7670a3c575c ]
The Lenovo Yoga Tablet 2 Pro 1380F/L is a x86 ACPI tablet which ships with
Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which
are not actually there, causing various resource conflicts. Enumeration of
these is skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the I2C + other devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240406125058.13624-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Apr 6 14:50:56 2024 +0200
platform/x86: x86-android-tablets: Unregister devices in reverse order
[ Upstream commit 3de0f2627ef849735f155c1818247f58404dddfe ]
Not all subsystems support a device getting removed while there are
still consumers of the device with a reference to the device.
One example of this is the regulator subsystem. If a regulator gets
unregistered while there are still drivers holding a reference
a WARN() at drivers/regulator/core.c:5829 triggers, e.g.:
WARNING: CPU: 1 PID: 1587 at drivers/regulator/core.c:5829 regulator_unregister
Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLADE_21.X64.0005.R00.1504101516 FFD8_X64_R_2015_04_10_1516 04/10/2015
RIP: 0010:regulator_unregister
Call Trace:
<TASK>
regulator_unregister
devres_release_group
i2c_device_remove
device_release_driver_internal
bus_remove_device
device_del
device_unregister
x86_android_tablet_remove
On the Lenovo Yoga Tablet 2 series the bq24190 charger chip also provides
a 5V boost converter output for powering USB devices connected to the micro
USB port, the bq24190-charger driver exports this as a Vbus regulator.
On the 830 (8") and 1050 ("10") models this regulator is controlled by
a platform_device and x86_android_tablet_remove() removes platform_device-s
before i2c_clients so the consumer gets removed first.
But on the 1380 (13") model there is a lc824206xa micro-USB switch
connected over I2C and the extcon driver for that controls the regulator.
The bq24190 i2c-client *must* be registered first, because that creates
the regulator with the lc824206xa listed as its consumer. If the regulator
has not been registered yet the lc824206xa driver will end up getting
a dummy regulator.
Since in this case both the regulator provider and consumer are I2C
devices, the only way to ensure that the consumer is unregistered first
is to unregister the I2C devices in reverse order of in which they were
created.
For consistency and to avoid similar problems in the future change
x86_android_tablet_remove() to unregister all device types in reverse
order.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240406125058.13624-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tzung-Bi Shih <tzungbi@kernel.org>
Date: Mon Apr 1 11:00:49 2024 +0800
power: supply: cros_usbpd: provide ID table for avoiding fallback match
[ Upstream commit 0f8678c34cbfdc63569a9b0ede1fe235ec6ec693 ]
Instead of using fallback driver name match, provide ID table[1] for the
primary match.
[1]: https://elixir.bootlin.com/linux/v6.8/source/drivers/base/platform.c#L1353
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20240401030052.2887845-4-tzungbi@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nathan Lynch <nathanl@linux.ibm.com>
Date: Mon Jun 3 08:01:03 2024 -0500
powerpc/crypto: Add generated P8 asm to .gitignore
[ Upstream commit 2b85b7fb1376481f7d4c2cf92e5da942f06b2547 ]
Looks like drivers/crypto/vmx/.gitignore should have been merged into
arch/powerpc/crypto/.gitignore as part of commit
109303336a0c ("crypto: vmx - Move to arch/powerpc/crypto") so that all
generated asm files are ignored.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 109303336a0c ("crypto: vmx - Move to arch/powerpc/crypto")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240603-powerpc-crypto-ignore-p8-asm-v1-1-05843fec2bb7@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Ellerman <mpe@ellerman.id.au>
Date: Fri May 3 17:56:18 2024 +1000
powerpc/io: Avoid clang null pointer arithmetic warnings
[ Upstream commit 03c0f2c2b2220fc9cf8785cd7b61d3e71e24a366 ]
With -Wextra clang warns about pointer arithmetic using a null pointer.
When building with CONFIG_PCI=n, that triggers a warning in the IO
accessors, eg:
In file included from linux/arch/powerpc/include/asm/io.h:672:
linux/arch/powerpc/include/asm/io-defs.h:23:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
23 | DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
linux/arch/powerpc/include/asm/io.h:591:53: note: expanded from macro '__do_inb'
591 | #define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port);
| ~~~~~~~~~~~~~~~~~~~~~ ^
That is because when CONFIG_PCI=n, _IO_BASE is defined as 0.
Although _IO_BASE is defined as plain 0, the cast (PCI_IO_ADDR) converts
it to void * before the addition with port happens.
Instead the addition can be done first, and then the cast. The resulting
value will be the same, but avoids the warning, and also avoids void
pointer arithmetic which is apparently non-standard.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtEh8zmq8k8wE-8RZwW-Qr927RLTn+KqGnq1F=ptaaNsA@mail.gmail.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240503075619.394467-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nathan Lynch <nathanl@linux.ibm.com>
Date: Mon Apr 8 09:08:31 2024 -0500
powerpc/pseries: Enforce hcall result buffer validity and size
[ Upstream commit ff2e185cf73df480ec69675936c4ee75a445c3e4 ]
plpar_hcall(), plpar_hcall9(), and related functions expect callers to
provide valid result buffers of certain minimum size. Currently this
is communicated only through comments in the code and the compiler has
no idea.
For example, if I write a bug like this:
long retbuf[PLPAR_HCALL_BUFSIZE]; // should be PLPAR_HCALL9_BUFSIZE
plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, ...);
This compiles with no diagnostics emitted, but likely results in stack
corruption at runtime when plpar_hcall9() stores results past the end
of the array. (To be clear this is a contrived example and I have not
found a real instance yet.)
To make this class of error less likely, we can use explicitly-sized
array parameters instead of pointers in the declarations for the hcall
APIs. When compiled with -Warray-bounds[1], the code above now
provokes a diagnostic like this:
error: array argument is too small;
is of size 32, callee requires at least 72 [-Werror,-Warray-bounds]
60 | plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf,
| ^ ~~~~~~
[1] Enabled for LLVM builds but not GCC for now. See commit
0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") and
related changes.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240408-pseries-hvcall-retbuf-v1-1-ebc73d7253cf@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Mon Jun 17 12:34:32 2024 +0300
ptp: fix integer overflow in max_vclocks_store
[ Upstream commit 81d23d2a24012e448f651e007fac2cfd20a45ce0 ]
On 32bit systems, the "4 * max" multiply can overflow. Use kcalloc()
to do the allocation to prevent this.
Fixes: 44c494c8e30e ("ptp: track available ptp vclocks information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://lore.kernel.org/r/ee8110ed-6619-4bd7-9024-28c1f2ac24f4@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stefan Wahren <wahrenst@gmx.net>
Date: Fri Jun 14 16:50:30 2024 +0200
qca_spi: Make interrupt remembering atomic
[ Upstream commit 2d7198278ece01818cd95a3beffbdf8b2a353fa0 ]
The whole mechanism to remember occurred SPI interrupts is not atomic,
which could lead to unexpected behavior. So fix this by using atomic bit
operations instead.
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240614145030.7781-1-wahrenst@gmx.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zqiang <qiang.zhang1211@gmail.com>
Date: Mon Mar 25 15:52:19 2024 +0800
rcutorture: Fix invalid context warning when enable srcu barrier testing
[ Upstream commit 668c0406d887467d53f8fe79261dda1d22d5b671 ]
When the torture_type is set srcu or srcud and cb_barrier is
non-zero, running the rcutorture test will trigger the
following warning:
[ 163.910989][ C1] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 163.910994][ C1] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
[ 163.910999][ C1] preempt_count: 10001, expected: 0
[ 163.911002][ C1] RCU nest depth: 0, expected: 0
[ 163.911005][ C1] INFO: lockdep is turned off.
[ 163.911007][ C1] irq event stamp: 30964
[ 163.911010][ C1] hardirqs last enabled at (30963): [<ffffffffabc7df52>] do_idle+0x362/0x500
[ 163.911018][ C1] hardirqs last disabled at (30964): [<ffffffffae616eff>] sysvec_call_function_single+0xf/0xd0
[ 163.911025][ C1] softirqs last enabled at (0): [<ffffffffabb6475f>] copy_process+0x16ff/0x6580
[ 163.911033][ C1] softirqs last disabled at (0): [<0000000000000000>] 0x0
[ 163.911038][ C1] Preemption disabled at:
[ 163.911039][ C1] [<ffffffffacf1964b>] stack_depot_save_flags+0x24b/0x6c0
[ 163.911063][ C1] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 6.8.0-rc4-rt4-yocto-preempt-rt+ #3 1e39aa9a737dd024a3275c4f835a872f673a7d3a
[ 163.911071][ C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[ 163.911075][ C1] Call Trace:
[ 163.911078][ C1] <IRQ>
[ 163.911080][ C1] dump_stack_lvl+0x88/0xd0
[ 163.911089][ C1] dump_stack+0x10/0x20
[ 163.911095][ C1] __might_resched+0x36f/0x530
[ 163.911105][ C1] rt_spin_lock+0x82/0x1c0
[ 163.911112][ C1] spin_lock_irqsave_ssp_contention+0xb8/0x100
[ 163.911121][ C1] srcu_gp_start_if_needed+0x782/0xf00
[ 163.911128][ C1] ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 163.911136][ C1] ? debug_object_active_state+0x336/0x470
[ 163.911148][ C1] ? __pfx_srcu_gp_start_if_needed+0x10/0x10
[ 163.911156][ C1] ? __pfx_lock_release+0x10/0x10
[ 163.911165][ C1] ? __pfx_rcu_torture_barrier_cbf+0x10/0x10
[ 163.911188][ C1] __call_srcu+0x9f/0xe0
[ 163.911196][ C1] call_srcu+0x13/0x20
[ 163.911201][ C1] srcu_torture_call+0x1b/0x30
[ 163.911224][ C1] rcu_torture_barrier1cb+0x4a/0x60
[ 163.911247][ C1] __flush_smp_call_function_queue+0x267/0xca0
[ 163.911256][ C1] ? __pfx_rcu_torture_barrier1cb+0x10/0x10
[ 163.911281][ C1] generic_smp_call_function_single_interrupt+0x13/0x20
[ 163.911288][ C1] __sysvec_call_function_single+0x7d/0x280
[ 163.911295][ C1] sysvec_call_function_single+0x93/0xd0
[ 163.911302][ C1] </IRQ>
[ 163.911304][ C1] <TASK>
[ 163.911308][ C1] asm_sysvec_call_function_single+0x1b/0x20
[ 163.911313][ C1] RIP: 0010:default_idle+0x17/0x20
[ 163.911326][ C1] RSP: 0018:ffff888001997dc8 EFLAGS: 00000246
[ 163.911333][ C1] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: ffffffffae618b51
[ 163.911337][ C1] RDX: 0000000000000000 RSI: ffffffffaea80920 RDI: ffffffffaec2de80
[ 163.911342][ C1] RBP: ffff888001997dc8 R08: 0000000000000001 R09: ffffed100d740cad
[ 163.911346][ C1] R10: ffffed100d740cac R11: ffff88806ba06563 R12: 0000000000000001
[ 163.911350][ C1] R13: ffffffffafe460c0 R14: ffffffffafe460c0 R15: 0000000000000000
[ 163.911358][ C1] ? ct_kernel_exit.constprop.3+0x121/0x160
[ 163.911369][ C1] ? lockdep_hardirqs_on+0xc4/0x150
[ 163.911376][ C1] arch_cpu_idle+0x9/0x10
[ 163.911383][ C1] default_idle_call+0x7a/0xb0
[ 163.911390][ C1] do_idle+0x362/0x500
[ 163.911398][ C1] ? __pfx_do_idle+0x10/0x10
[ 163.911404][ C1] ? complete_with_flags+0x8b/0xb0
[ 163.911416][ C1] cpu_startup_entry+0x58/0x70
[ 163.911423][ C1] start_secondary+0x221/0x280
[ 163.911430][ C1] ? __pfx_start_secondary+0x10/0x10
[ 163.911440][ C1] secondary_startup_64_no_verify+0x17f/0x18b
[ 163.911455][ C1] </TASK>
This commit therefore use smp_call_on_cpu() instead of
smp_call_function_single(), make rcu_torture_barrier1cb() invoked
happens on task-context.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Paul E. McKenney <paulmck@kernel.org>
Date: Wed Mar 6 19:21:47 2024 -0800
rcutorture: Fix rcu_torture_one_read() pipe_count overflow comment
[ Upstream commit 8b9b443fa860276822b25057cb3ff3b28734dec0 ]
The "pipe_count > RCU_TORTURE_PIPE_LEN" check has a comment saying "Should
not happen, but...". This is only true when testing an RCU whose grace
periods are always long enough. This commit therefore fixes this comment.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wi7rJ-eGq+xaxVfzFEgbL9tdf6Kc8Z89rCpfcQOKm74Tw@mail.gmail.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zqiang <qiang.zhang1211@gmail.com>
Date: Thu Mar 21 16:28:50 2024 +0800
rcutorture: Make stall-tasks directly exit when rcutorture tests end
[ Upstream commit 431315a563015f259b28e34c5842f6166439e969 ]
When the rcutorture tests start to exit, the rcu_torture_cleanup() is
invoked to stop kthreads and release resources, if the stall-task
kthreads exist, cpu-stall has started and the rcutorture.stall_cpu
is set to a larger value, the rcu_torture_cleanup() will be blocked
for a long time and the hung-task may occur, this commit therefore
add kthread_should_stop() to the loop of cpu-stall operation, when
rcutorture tests ends, no need to wait for cpu-stall to end, exit
directly.
Use the following command to test:
insmod rcutorture.ko torture_type=srcu fwd_progress=0 stat_interval=4
stall_cpu_block=1 stall_cpu=200 stall_cpu_holdoff=10 read_exit_burst=0
object_debug=1
rmmod rcutorture
[15361.918610] INFO: task rmmod:878 blocked for more than 122 seconds.
[15361.918613] Tainted: G W
6.8.0-rc2-yoctodev-standard+ #25
[15361.918615] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[15361.918616] task:rmmod state:D stack:0 pid:878
tgid:878 ppid:773 flags:0x00004002
[15361.918621] Call Trace:
[15361.918623] <TASK>
[15361.918626] __schedule+0xc0d/0x28f0
[15361.918631] ? __pfx___schedule+0x10/0x10
[15361.918635] ? rcu_is_watching+0x19/0xb0
[15361.918638] ? schedule+0x1f6/0x290
[15361.918642] ? __pfx_lock_release+0x10/0x10
[15361.918645] ? schedule+0xc9/0x290
[15361.918648] ? schedule+0xc9/0x290
[15361.918653] ? trace_preempt_off+0x54/0x100
[15361.918657] ? schedule+0xc9/0x290
[15361.918661] schedule+0xd0/0x290
[15361.918665] schedule_timeout+0x56d/0x7d0
[15361.918669] ? debug_smp_processor_id+0x1b/0x30
[15361.918672] ? rcu_is_watching+0x19/0xb0
[15361.918676] ? __pfx_schedule_timeout+0x10/0x10
[15361.918679] ? debug_smp_processor_id+0x1b/0x30
[15361.918683] ? rcu_is_watching+0x19/0xb0
[15361.918686] ? wait_for_completion+0x179/0x4c0
[15361.918690] ? __pfx_lock_release+0x10/0x10
[15361.918693] ? __kasan_check_write+0x18/0x20
[15361.918696] ? wait_for_completion+0x9d/0x4c0
[15361.918700] ? _raw_spin_unlock_irq+0x36/0x50
[15361.918703] ? wait_for_completion+0x179/0x4c0
[15361.918707] ? _raw_spin_unlock_irq+0x36/0x50
[15361.918710] ? wait_for_completion+0x179/0x4c0
[15361.918714] ? trace_preempt_on+0x54/0x100
[15361.918718] ? wait_for_completion+0x179/0x4c0
[15361.918723] wait_for_completion+0x181/0x4c0
[15361.918728] ? __pfx_wait_for_completion+0x10/0x10
[15361.918738] kthread_stop+0x152/0x470
[15361.918742] _torture_stop_kthread+0x44/0xc0 [torture
7af7f9cbba28271a10503b653f9e05d518fbc8c3]
[15361.918752] rcu_torture_cleanup+0x2ac/0xe90 [rcutorture
f2cb1f556ee7956270927183c4c2c7749a336529]
[15361.918766] ? __pfx_rcu_torture_cleanup+0x10/0x10 [rcutorture
f2cb1f556ee7956270927183c4c2c7749a336529]
[15361.918777] ? __kasan_check_write+0x18/0x20
[15361.918781] ? __mutex_unlock_slowpath+0x17c/0x670
[15361.918789] ? __might_fault+0xcd/0x180
[15361.918793] ? find_module_all+0x104/0x1d0
[15361.918799] __x64_sys_delete_module+0x2a4/0x3f0
[15361.918803] ? __pfx___x64_sys_delete_module+0x10/0x10
[15361.918807] ? syscall_exit_to_user_mode+0x149/0x280
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Selvin Xavier <selvin.xavier@broadcom.com>
Date: Mon May 20 01:56:58 2024 -0700
RDMA/bnxt_re: Fix the max msix vectors macro
[ Upstream commit 056620da899527c14cf36e5019a0decaf4cf0f79 ]
bnxt_re no longer decide the number of MSI-x vectors used by itself.
Its decided by bnxt_en now. So when bnxt_en changes this value, system
crash is seen.
Depend on the max value reported by bnxt_en instead of using the its own macros.
Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1716195418-11767-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konstantin Taranov <kotaranov@microsoft.com>
Date: Wed Jun 5 01:16:08 2024 -0700
RDMA/mana_ib: Ignore optional access flags for MRs
[ Upstream commit 82a5cc783d49b86afd2f60e297ecd85223c39f88 ]
Ignore optional ib_access_flags when an MR is created.
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1717575368-14879-1-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patrisious Haddad <phaddad@nvidia.com>
Date: Tue May 28 15:52:56 2024 +0300
RDMA/mlx5: Add check for srq max_sge attribute
[ Upstream commit 36ab7ada64caf08f10ee5a114d39964d1f91e81d ]
max_sge attribute is passed by the user, and is inserted and used
unchecked, so verify that the value doesn't exceed maximum allowed value
before using it.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/277ccc29e8d57bfd53ddeb2ac633f2760cf8cdd0.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason Gunthorpe <jgg@ziepe.ca>
Date: Tue May 28 15:52:54 2024 +0300
RDMA/mlx5: Ensure created mkeys always have a populated rb_key
commit 2e4c02fdecf2f6f55cefe48cb82d93fa4f8e2204 upstream.
cachable and mmkey.rb_key together are used by mlx5_revoke_mr() to put the
MR/mkey back into the cache. In all cases they should be set correctly.
alloc_cacheable_mr() was setting cachable but not filling rb_key,
resulting in cache_ent_find_and_store() bucketing them all into a 0 length
entry.
implicit_get_child_mr()/mlx5_ib_alloc_implicit_mr() failed to set cachable
or rb_key at all, so the cache was not working at all for implicit ODP.
Cc: stable@vger.kernel.org
Fixes: 8c1185fef68c ("RDMA/mlx5: Change check for cacheable mkeys")
Fixes: dd1b913fb0d0 ("RDMA/mlx5: Cache all user cacheable mkeys on dereg MR flow")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7778c02dfa0999a30d6746c79a23dd7140a9c729.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yishai Hadas <yishaih@nvidia.com>
Date: Tue May 28 15:52:55 2024 +0300
RDMA/mlx5: Fix unwind flow as part of mlx5_ib_stage_init_init
[ Upstream commit 81497c148b7a2e4a4fbda93aee585439f7323e2e ]
Fix unwind flow as part of mlx5_ib_stage_init_init to use the correct
goto upon an error.
Fixes: 758ce14aee82 ("RDMA/mlx5: Implement MACsec gid addition and deletion")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/aa40615116eda14ec9eca21d52017d632ea89188.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason Gunthorpe <jgg@ziepe.ca>
Date: Tue May 28 15:52:53 2024 +0300
RDMA/mlx5: Follow rb_key.ats when creating new mkeys
commit f637040c3339a2ed8c12d65ad03f9552386e2fe7 upstream.
When a cache ent already exists but doesn't have any mkeys in it the cache
will automatically create a new one based on the specification in the
ent->rb_key.
ent->ats was missed when creating the new key and so ma_translation_mode
was not being set even though the ent requires it.
Cc: stable@vger.kernel.org
Fixes: 73d09b2fe833 ("RDMA/mlx5: Introduce mlx5r_cache_rb_key")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/7c5613458ecb89fbe5606b7aa4c8d990bdea5b9a.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jason Gunthorpe <jgg@ziepe.ca>
Date: Tue May 28 15:52:52 2024 +0300
RDMA/mlx5: Remove extra unlock on error path
commit c1eb2512596fb3542357bb6c34c286f5e0374538 upstream.
The below commit lifted the locking out of this function but left this
error path unlock behind resulting in unbalanced locking. Remove the
missed unlock too.
Cc: stable@vger.kernel.org
Fixes: 627122280c87 ("RDMA/mlx5: Add work to remove temporary entries from the cache")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/78090c210c750f47219b95248f9f782f34548bb1.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Honggang LI <honggangli@163.com>
Date: Thu May 16 17:50:52 2024 +0800
RDMA/rxe: Fix data copy for IB_SEND_INLINE
commit 03fa18a992d5626fd7bf3557a52e826bf8b326b3 upstream.
For RDMA Send and Write with IB_SEND_INLINE, the memory buffers
specified in sge list will be placed inline in the Send Request.
The data should be copied by CPU from the virtual addresses of
corresponding sge list DMA addresses.
Cc: stable@kernel.org
Fixes: 8d7c7c0eeb74 ("RDMA: Add ib_virt_dma_to_page()")
Signed-off-by: Honggang LI <honggangli@163.com>
Link: https://lore.kernel.org/r/20240516095052.542767-1-honggangli@163.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Honggang LI <honggangli@163.com>
Date: Thu May 23 17:46:17 2024 +0800
RDMA/rxe: Fix responder length checking for UD request packets
[ Upstream commit f67ac0061c7614c1548963d3ef1ee1606efd8636 ]
According to the IBA specification:
If a UD request packet is detected with an invalid length, the request
shall be an invalid request and it shall be silently dropped by
the responder. The responder then waits for a new request packet.
commit 689c5421bfe0 ("RDMA/rxe: Fix incorrect responder length checking")
defers responder length check for UD QPs in function `copy_data`.
But it introduces a regression issue for UD QPs.
When the packet size is too large to fit in the receive buffer.
`copy_data` will return error code -EINVAL. Then `send_data_in`
will return RESPST_ERR_MALFORMED_WQE. UD QP will transfer into
ERROR state.
Fixes: 689c5421bfe0 ("RDMA/rxe: Fix incorrect responder length checking")
Signed-off-by: Honggang LI <honggangli@163.com>
Link: https://lore.kernel.org/r/20240523094617.141148-1-honggangli@163.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kalle Niemi <kaleposti@gmail.com>
Date: Wed Jun 12 14:42:34 2024 +0300
regulator: bd71815: fix ramp values
[ Upstream commit 4cac29b846f38d5f0654cdfff5c5bfc37305081c ]
Ramp values are inverted. This caused wrong values written to register
when ramp values were defined in device tree.
Invert values in table to fix this.
Signed-off-by: Kalle Niemi <kaleposti@gmail.com>
Fixes: 1aad39001e85 ("regulator: Support ROHM BD71815 regulators")
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/ZmmJXtuVJU6RgQAH@latitude5580
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Biju Das <biju.das.jz@bp.renesas.com>
Date: Mon Jun 10 20:55:32 2024 +0100
regulator: core: Fix modpost error "regulator_get_regmap" undefined
[ Upstream commit 3f60497c658d2072714d097a177612d34b34aa3d ]
Fix the modpost error "regulator_get_regmap" undefined by adding export
symbol.
Fixes: 04eca28cde52 ("regulator: Add helpers for low-level register access")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406110117.mk5UR3VZ-lkp@intel.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240610195532.175942-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon Jun 17 12:57:03 2024 -0700
Revert "mm: mmap: allow for the maximum number of bits for randomizing mmap_base by default"
commit 14d7c92f8df9c0964ae6f8b813c1b3ac38120825 upstream.
This reverts commit 3afb76a66b5559a7b595155803ce23801558a7a9.
This was a wrongheaded workaround for an issue that had already been
fixed much better by commit 4ef9ad19e176 ("mm: huge_memory: don't force
huge page alignment on 32 bit").
Asking users questions at kernel compile time that they can't make sense
of is not a viable strategy. And the fact that even the kernel VM
maintainers apparently didn't catch that this "fix" is not a fix any
more pretty much proves the point that people can't be expected to
understand the implications of the question.
It may well be the case that we could improve things further, and that
__thp_get_unmapped_area() should take the mapping randomization into
account even for 64-bit kernels. Maybe we should not be so eager to use
THP mappings.
But in no case should this be a kernel config option.
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xin Long <lucien.xin@gmail.com>
Date: Sat Jun 15 17:47:30 2024 -0400
sched: act_ct: add netns into the key of tcf_ct_flow_table
[ Upstream commit 88c67aeb14070bab61d3dd8be96c8b42ebcaf53a ]
zones_ht is a global hashtable for flow_table with zone as key. However,
it does not consider netns when getting a flow_table from zones_ht in
tcf_ct_init(), and it means an act_ct action in netns A may get a
flow_table that belongs to netns B if it has the same zone value.
In Shuang's test with the TOPO:
tcf2_c <---> tcf2_sw1 <---> tcf2_sw2 <---> tcf2_s
tcf2_sw1 and tcf2_sw2 saw the same flow and used the same flow table,
which caused their ct entries entering unexpected states and the
TCP connection not able to end normally.
This patch fixes the issue simply by adding netns into the key of
tcf_ct_flow_table so that an act_ct action gets a flow_table that
belongs to its own netns in tcf_ct_init().
Note that for easy coding we don't use tcf_ct_flow_table.nf_ft.net,
as the ct_ft is initialized after inserting it to the hashtable in
tcf_ct_flow_table_get() and also it requires to implement several
functions in rhashtable_params including hashfn, obj_hashfn and
obj_cmpfn.
Fixes: 64ff70b80fd4 ("net/sched: act_ct: Offload established connections to flow table")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1db5b6cc6902c5fc6f8c6cbd85494a2008087be5.1718488050.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bart Van Assche <bvanassche@acm.org>
Date: Thu Jun 13 14:18:26 2024 -0700
scsi: core: Introduce the BLIST_SKIP_IO_HINTS flag
commit 633aeefafc9c2a07a76a62be6aac1d73c3e3defa upstream.
Prepare for skipping the IO Advice Hints Grouping mode page for USB storage
devices.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Joao Machado <jocrismachado@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Christian Heusel <christian@heusel.eu>
Cc: stable@vger.kernel.org
Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240613211828.2077477-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Manish Rangankar <mrangankar@marvell.com>
Date: Mon Apr 15 12:51:55 2024 +0530
scsi: qedi: Fix crash while reading debugfs attribute
[ Upstream commit 28027ec8e32ecbadcd67623edb290dad61e735b5 ]
The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly
on a __user pointer, which results into the crash.
To fix this issue, use a small local stack buffer for sprintf() and then
call simple_read_from_buffer(), which in turns make the copy_to_user()
call.
BUG: unable to handle page fault for address: 00007f4801111000
PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0
Oops: 0002 [#1] PREEMPT SMP PTI
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023
RIP: 0010:memcpy_orig+0xcd/0x130
RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202
RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f
RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000
RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572
R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff
R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af
FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x183/0x510
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x22/0x30
? memcpy_orig+0xcd/0x130
vsnprintf+0x102/0x4c0
sprintf+0x51/0x80
qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324]
full_proxy_read+0x50/0x80
vfs_read+0xa5/0x2e0
? folio_add_new_anon_rmap+0x44/0xa0
? set_pte_at+0x15/0x30
? do_pte_missing+0x426/0x7f0
ksys_read+0xa5/0xe0
do_syscall_64+0x58/0x80
? __count_memcg_events+0x46/0x90
? count_memcg_event_mm+0x3d/0x60
? handle_mm_fault+0x196/0x2f0
? do_user_addr_fault+0x267/0x890
? exc_page_fault+0x69/0x150
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4800f20b4d
Tested-by: Martin Hoyer <mhoyer@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Link: https://lore.kernel.org/r/20240415072155.30840-1-mrangankar@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Joel Slebodnick <jslebodn@redhat.com>
Date: Thu Jun 13 14:27:28 2024 -0400
scsi: ufs: core: Free memory allocated for model before reinit
commit 135c6eb27a85c8b261a2cc1f5093abcda6ee9010 upstream.
Under the conditions that a device is to be reinitialized within
ufshcd_probe_hba(), the device must first be fully reset.
Resetting the device should include freeing U8 model (member of dev_info)
but does not, and this causes a memory leak. ufs_put_device_desc() is
responsible for freeing model.
unreferenced object 0xffff3f63008bee60 (size 32):
comm "kworker/u33:1", pid 60, jiffies 4294892642
hex dump (first 32 bytes):
54 48 47 4a 46 47 54 30 54 32 35 42 41 5a 5a 41 THGJFGT0T25BAZZA
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc ed7ff1a9):
[<ffffb86705f1243c>] kmemleak_alloc+0x34/0x40
[<ffffb8670511cee4>] __kmalloc_noprof+0x1e4/0x2fc
[<ffffb86705c247fc>] ufshcd_read_string_desc+0x94/0x190
[<ffffb86705c26854>] ufshcd_device_init+0x480/0xdf8
[<ffffb86705c27b68>] ufshcd_probe_hba+0x3c/0x404
[<ffffb86705c29264>] ufshcd_async_scan+0x40/0x370
[<ffffb86704f43e9c>] async_run_entry_fn+0x34/0xe0
[<ffffb86704f34638>] process_one_work+0x154/0x298
[<ffffb86704f34a74>] worker_thread+0x2f8/0x408
[<ffffb86704f3cfa4>] kthread+0x114/0x118
[<ffffb86704e955a0>] ret_from_fork+0x10/0x20
Fixes: 96a7141da332 ("scsi: ufs: core: Add support for reinitializing the UFS device")
Cc: <stable@vger.kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Joel Slebodnick <jslebodn@redhat.com>
Link: https://lore.kernel.org/r/20240613200202.2524194-1-jslebodn@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bart Van Assche <bvanassche@acm.org>
Date: Thu Jun 13 14:18:27 2024 -0700
scsi: usb: uas: Do not query the IO Advice Hints Grouping mode page for USB/UAS devices
commit 57619f3cdeb5ae9f4252833b0ed600e9f81da722 upstream.
Recently it was reported that the following USB storage devices are
unusable with Linux kernel 6.9:
* Kingston DataTraveler G2
* Garmin FR35
This is because attempting to read the IO Advice Hints Grouping mode page
causes these devices to reset. Hence do not read the IO Advice Hints
Grouping mode page from USB/UAS storage devices.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information")
Reported-by: Joao Machado <jocrismachado@gmail.com>
Closes: https://lore.kernel.org/linux-scsi/20240130214911.1863909-1-bvanassche@acm.org/T/#mf4e3410d8f210454d7e4c3d1fb5c0f41e651b85f
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Bisected-by: Christian Heusel <christian@heusel.eu>
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Closes: https://lore.kernel.org/linux-scsi/CACLx9VdpUanftfPo2jVAqXdcWe8Y43MsDeZmMPooTzVaVJAh2w@mail.gmail.com/
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240613211828.2077477-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jianguo Wu <wujianguo@chinatelecom.cn>
Date: Thu Jun 13 17:42:46 2024 +0800
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
[ Upstream commit 9a3bc8d16e0aacd65c31aaf23a2bced3288a7779 ]
input_action_end_dx4() and input_action_end_dx6() are called NF_HOOK() for
PREROUTING hook, in PREROUTING hook, we should passing a valid indev,
and a NULL outdev to NF_HOOK(), otherwise may trigger a NULL pointer
dereference, as below:
[74830.647293] BUG: kernel NULL pointer dereference, address: 0000000000000090
[74830.655633] #PF: supervisor read access in kernel mode
[74830.657888] #PF: error_code(0x0000) - not-present page
[74830.659500] PGD 0 P4D 0
[74830.660450] Oops: 0000 [#1] PREEMPT SMP PTI
...
[74830.664953] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[74830.666569] RIP: 0010:rpfilter_mt+0x44/0x15e [ipt_rpfilter]
...
[74830.689725] Call Trace:
[74830.690402] <IRQ>
[74830.690953] ? show_trace_log_lvl+0x1c4/0x2df
[74830.692020] ? show_trace_log_lvl+0x1c4/0x2df
[74830.693095] ? ipt_do_table+0x286/0x710 [ip_tables]
[74830.694275] ? __die_body.cold+0x8/0xd
[74830.695205] ? page_fault_oops+0xac/0x140
[74830.696244] ? exc_page_fault+0x62/0x150
[74830.697225] ? asm_exc_page_fault+0x22/0x30
[74830.698344] ? rpfilter_mt+0x44/0x15e [ipt_rpfilter]
[74830.699540] ipt_do_table+0x286/0x710 [ip_tables]
[74830.700758] ? ip6_route_input+0x19d/0x240
[74830.701752] nf_hook_slow+0x3f/0xb0
[74830.702678] input_action_end_dx4+0x19b/0x1e0
[74830.703735] ? input_action_end_t+0xe0/0xe0
[74830.704734] seg6_local_input_core+0x2d/0x60
[74830.705782] lwtunnel_input+0x5b/0xb0
[74830.706690] __netif_receive_skb_one_core+0x63/0xa0
[74830.707825] process_backlog+0x99/0x140
[74830.709538] __napi_poll+0x2c/0x160
[74830.710673] net_rx_action+0x296/0x350
[74830.711860] __do_softirq+0xcb/0x2ac
[74830.713049] do_softirq+0x63/0x90
input_action_end_dx4() passing a NULL indev to NF_HOOK(), and finally
trigger a NULL dereference in rpfilter_mt()->rpfilter_is_loopback():
static bool
rpfilter_is_loopback(const struct sk_buff *skb,
const struct net_device *in)
{
// in is NULL
return skb->pkt_type == PACKET_LOOPBACK ||
in->flags & IFF_LOOPBACK;
}
Fixes: 7a3f5b0de364 ("netfilter: add netfilter hooks to SRv6 data plane")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yonghong Song <yonghong.song@linux.dev>
Date: Thu Mar 21 23:13:53 2024 -0700
selftests/bpf: Fix flaky test btf_map_in_map/lookup_update
[ Upstream commit 14bb1e8c8d4ad5d9d2febb7d19c70a3cf536e1e5 ]
Recently, I frequently hit the following test failure:
[root@arch-fb-vm1 bpf]# ./test_progs -n 33/1
test_lookup_update:PASS:skel_open 0 nsec
[...]
test_lookup_update:PASS:sync_rcu 0 nsec
test_lookup_update:FAIL:map1_leak inner_map1 leaked!
#33/1 btf_map_in_map/lookup_update:FAIL
#33 btf_map_in_map:FAIL
In the test, after map is closed and then after two rcu grace periods,
it is assumed that map_id is not available to user space.
But the above assumption cannot be guaranteed. After zero or one
or two rcu grace periods in different siturations, the actual
freeing-map-work is put into a workqueue. Later on, when the work
is dequeued, the map will be actually freed.
See bpf_map_put() in kernel/bpf/syscall.c.
By using workqueue, there is no ganrantee that map will be actually
freed after a couple of rcu grace periods. This patch removed
such map leak detection and then the test can pass consistently.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240322061353.632136-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Date: Thu Mar 14 10:59:11 2024 +0000
selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh
[ Upstream commit f803bcf9208a2540acb4c32bdc3616673169f490 ]
In some systems, the netcat server can incur in delay to start listening.
When this happens, the test can randomly fail in various points.
This is an example error message:
# ip gre none gso
# encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000
# test basic connectivity
# Ncat: Connection refused.
The issue stems from a race condition between the netcat client and server.
The test author had addressed this problem by implementing a sleep, which
I have removed in this patch.
This patch introduces a function capable of sleeping for up to two seconds.
However, it can terminate the waiting period early if the port is reported
to be listening.
Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240314105911.213411-1-alessandro.carminati@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Fri Jun 14 19:15:29 2024 +0200
selftests: mptcp: userspace_pm: fixed subtest names
commit e874557fce1b6023efafd523aee0c347bf7f1694 upstream.
It is important to have fixed (sub)test names in TAP, because these
names are used to identify them. If they are not fixed, tracking cannot
be done.
Some subtests from the userspace_pm selftest were using random numbers
in their names: the client and server address IDs from $RANDOM, and the
client port number randomly picked by the kernel when creating the
connection. These values have been replaced by 'client' and 'server'
words: that's even more helpful than showing random numbers. Note that
the addresses IDs are incremented and decremented in the test: +1 or -1
are then displayed in these cases.
Not to loose info that can be useful for debugging in case of issues,
these random numbers are now displayed at the beginning of the test.
Fixes: f589234e1af0 ("selftests: mptcp: userspace_pm: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240614-upstream-net-20240614-selftests-mptcp-uspace-pm-fixed-test-names-v1-1-460ad3edb429@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jakub Kicinski <kuba@kernel.org>
Date: Thu May 9 17:57:04 2024 -0700
selftests: net: fix timestamp not arriving in cmsg_time.sh
[ Upstream commit 2d3b8dfd82d76b1295167c6453d683ab99e50794 ]
On slow machines the SND timestamp sometimes doesn't arrive before
we quit. The test only waits as long as the packet delay, so it's
easy for a race condition to happen.
Double the wait but do a bit of polling, once the SND timestamp
arrives there's no point to wait any longer.
This fixes the "TXTIME abs" failures on debug kernels, like:
Case ICMPv4 - TXTIME abs returned '', expected 'OK'
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240510005705.43069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Simon Horman <horms@kernel.org>
Date: Mon Jun 17 09:28:33 2024 +0100
selftests: openvswitch: Use bash as interpreter
[ Upstream commit e2b447c9a1bba718f9c07513a1e8958209e862a1 ]
openvswitch.sh makes use of substitutions of the form ${ns:0:1}, to
obtain the first character of $ns. Empirically, this is works with bash
but not dash. When run with dash these evaluate to an empty string and
printing an error to stdout.
# dash -c 'ns=client; echo "${ns:0:1}"' 2>error
# cat error
dash: 1: Bad substitution
# bash -c 'ns=client; echo "${ns:0:1}"' 2>error
c
# cat error
This leads to tests that neither pass nor fail.
F.e.
TEST: arp_ping [START]
adding sandbox 'test_arp_ping'
Adding DP/Bridge IF: sbx:test_arp_ping dp:arpping {, , }
create namespaces
./openvswitch.sh: 282: eval: Bad substitution
TEST: ct_connect_v4 [START]
adding sandbox 'test_ct_connect_v4'
Adding DP/Bridge IF: sbx:test_ct_connect_v4 dp:ct4 {, , }
./openvswitch.sh: 322: eval: Bad substitution
create namespaces
Resolve this by making openvswitch.sh a bash script.
Fixes: 918423fda910 ("selftests: openvswitch: add an initial flow programming case")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240617-ovs-selftest-bash-v1-1-7ae6ccd3617b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Tue May 14 22:05:54 2024 +0300
serial: 8250_dw: Revert "Move definitions to the shared header"
commit 2c94512055f362dd789e0f87b8566feeddec83c9 upstream.
This reverts commit d9666dfb314e1ffd6eb9c3c4243fe3e094c047a7.
The container of the struct dw8250_port_data is private to the actual
driver. In particular, 8250_lpss and 8250_dw use different data types
that are assigned to the UART port private_data. Hence, it must not
be used outside the specific driver.
Fix the mistake made in the past by moving the respective definitions
to the specific driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240514190730.2787071-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Parker Newman <pnewman@connecttech.com>
Date: Tue Apr 16 08:55:28 2024 -0400
serial: exar: adding missing CTI and Exar PCI ids
[ Upstream commit b86ae40ffcf5a16b9569b1016da4a08c4f352ca2 ]
- Added Connect Tech and Exar IDs not already in pci_ids.h
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/7c3d8e795a864dd9b0a00353b722060dc27c4e09.1713270624.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Esben Haabendal <esben@geanix.com>
Date: Thu Apr 11 14:19:23 2024 +0200
serial: imx: Introduce timeout when waiting on transmitter empty
[ Upstream commit e533e4c62e9993e62e947ae9bbec34e4c7ae81c2 ]
By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential
deadlock.
In case of the timeout, there is not much we can do, so we simply ignore
the transmitter state and optimistically try to continue.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/919647898c337a46604edcabaf13d42d80c0915d.1712837613.git.esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Charles Keepax <ckeepax@opensource.cirrus.com>
Date: Tue Jun 4 14:17:04 2024 +0100
spi: cs42l43: Correct SPI root clock speed
[ Upstream commit 4eecb644b8b82f5279a348f6ebe77e3d6e5b1b05 ]
The root clock is actually 49.152MHz not 40MHz, as it is derived from
the primary audio clock, update the driver to match. This error can
cause the actual clock rate to be higher than the requested clock rate
on the SPI bus.
Fixes: ef75e767167a ("spi: cs42l43: Add SPI controller support")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240604131704.3227500-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Date: Mon Jun 17 21:00:52 2024 +0530
spi: Fix SPI slave probe failure
[ Upstream commit 2c1b7bbe253986619fa5623a13055316e730e746 ]
While adding a SPI device, the SPI core ensures that multiple logical CS
doesn't map to the same physical CS. For example, spi->chip_select[0] !=
spi->chip_select[1] and so forth. However, unlike the SPI master, the SPI
slave doesn't have the list of chip selects, this leads to probe failure
when the SPI controller is configured as slave. Update the
__spi_add_device() function to perform this check only if the SPI
controller is configured as master.
Fixes: 4d8ff6b0991d ("spi: Add multi-cs memories support in SPI core")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://msgid.link/r/20240617153052.26636-1-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Tue Jun 18 19:34:18 2024 +0200
spi: spi-imx: imx51: revert burst length calculation back to bits_per_word
[ Upstream commit df75470b317b46affbe1f5f8f006b34175be9789 ]
The patch 15a6af94a277 ("spi: Increase imx51 ecspi burst length based
on transfer length") increased the burst length calculation in
mx51_ecspi_prepare_transfer() to be based on the transfer length.
This breaks HW CS + SPI_CS_WORD support which was added in
6e95b23a5b2d ("spi: imx: Implement support for CS_WORD") and transfers
with bits-per-word != 8, 16, 32.
SPI_CS_WORD means the CS should be toggled after each word. The
implementation in the imx-spi driver relies on the fact that the HW CS
is toggled automatically by the controller after each burst length
number of bits. Setting the burst length to the number of bits of the
_whole_ message breaks this use case.
Further the patch 15a6af94a277 ("spi: Increase imx51 ecspi burst
length based on transfer length") claims to optimize the transfers.
But even without this patch, on modern spi-imx controllers with
"dynamic_burst = true" (imx51, imx6 and newer), the transfers are
already optimized, i.e. the burst length is dynamically adjusted in
spi_imx_push() to avoid the pause between the SPI bursts. This has
been confirmed by a scope measurement on an imx6d.
Subsequent Patches tried to fix these and other problems:
- 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits")
- e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma")
- c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode")
- cf6d79a0f576 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
but the HW CS + SPI_CS_WORD use case is still broken.
To fix the problems revert the burst size calculation in
mx51_ecspi_prepare_transfer() back to the original form, before
15a6af94a277 ("spi: Increase imx51 ecspi burst length based on
transfer length") was applied.
Cc: Stefan Moring <stefan.moring@technolution.nl>
Cc: Stefan Bigler <linux@bigler.io>
Cc: Clark Wang <xiaoning.wang@nxp.com>
Cc: Carlos Song <carlos.song@nxp.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Thorsten Scherer <T.Scherer@eckelmann.de>
Fixes: 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length")
Fixes: 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits")
Fixes: e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma")
Fixes: c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode")
Fixes: cf6d79a0f576 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
Link: https://lore.kernel.org/all/20240618-oxpecker-of-ideal-mastery-db59f8-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://msgid.link/r/20240618-spi-imx-fix-bustlength-v1-1-2053dd5fdf87@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patrice Chotard <patrice.chotard@foss.st.com>
Date: Tue Jun 18 15:29:50 2024 +0200
spi: stm32: qspi: Clamp stm32_qspi_get_mode() output to CCR_BUSWIDTH_4
commit 63deee52811b2f84ed2da55ad47252f0e8145d62 upstream.
In case usage of OCTAL mode, buswidth parameter can take the value 8.
As return value of stm32_qspi_get_mode() is used to configure fields
of CCR registers that are 2 bits only (fields IMODE, ADMODE, ADSIZE,
DMODE), clamp return value of stm32_qspi_get_mode() to 4.
Fixes: a557fca630cc ("spi: stm32_qspi: Add transfer_one_message() spi callback")
Cc: stable@vger.kernel.org
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://msgid.link/r/20240618132951.2743935-3-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Patrice Chotard <patrice.chotard@foss.st.com>
Date: Tue Jun 18 15:29:49 2024 +0200
spi: stm32: qspi: Fix dual flash mode sanity test in stm32_qspi_setup()
commit c2bd0791c5f02e964402624dfff45ca8995f5397 upstream.
Misplaced parenthesis make test of mode wrong in case mode is equal to
SPI_TX_OCTAL or SPI_RX_OCTAL.
Simplify this sanity test, if one of this bit is set, property
cs-gpio must be present in DT.
Fixes: a557fca630cc ("spi: stm32_qspi: Add transfer_one_message() spi callback")
Cc: stable@vger.kernel.org
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://msgid.link/r/20240618132951.2743935-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rand Deeb <rand.sec96@gmail.com>
Date: Wed Mar 6 15:30:28 2024 +0300
ssb: Fix potential NULL pointer dereference in ssb_device_uevent()
[ Upstream commit 789c17185fb0f39560496c2beab9b57ce1d0cbe7 ]
The ssb_device_uevent() function first attempts to convert the 'dev' pointer
to 'struct ssb_device *'. However, it mistakenly dereferences 'dev' before
performing the NULL check, potentially leading to a NULL pointer
dereference if 'dev' is NULL.
To fix this issue, move the NULL check before dereferencing the 'dev' pointer,
ensuring that the pointer is valid before attempting to use it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240306123028.164155-1-rand.sec96@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Jun 14 13:06:15 2024 +0000
tcp: clear tp->retrans_stamp in tcp_rcv_fastopen_synack()
commit 9e046bb111f13461d3f9331e24e974324245140e upstream.
Some applications were reporting ETIMEDOUT errors on apparently
good looking flows, according to packet dumps.
We were able to root cause the issue to an accidental setting
of tp->retrans_stamp in the following scenario:
- client sends TFO SYN with data.
- server has TFO disabled, ACKs only SYN but not payload.
- client receives SYNACK covering only SYN.
- tcp_ack() eats SYN and sets tp->retrans_stamp to 0.
- tcp_rcv_fastopen_synack() calls tcp_xmit_retransmit_queue()
to retransmit TFO payload w/o SYN, sets tp->retrans_stamp to "now",
but we are not in any loss recovery state.
- TFO payload is ACKed.
- we are not in any loss recovery state, and don't see any dupacks,
so we don't get to any code path that clears tp->retrans_stamp.
- tp->retrans_stamp stays non-zero for the lifetime of the connection.
- after first RTO, tcp_clamp_rto_to_user_timeout() clamps second RTO
to 1 jiffy due to bogus tp->retrans_stamp.
- on clamped RTO with non-zero icsk_retransmits, retransmits_timed_out()
sets start_ts from tp->retrans_stamp from TFO payload retransmit
hours/days ago, and computes bogus long elapsed time for loss recovery,
and suffers ETIMEDOUT early.
Fixes: a7abf3cd76e1 ("tcp: consider using standard rtx logic in tcp_rcv_fastopen_synack()")
CC: stable@vger.kernel.org
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Co-developed-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240614130615.396837-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Julien Panis <jpanis@baylibre.com>
Date: Tue Jun 4 18:46:58 2024 +0200
thermal/drivers/mediatek/lvts_thermal: Return error in case of invalid efuse data
[ Upstream commit 72cacd06e47d86d89b0e7179fbc9eb3a0f39cd93 ]
This patch prevents from registering thermal entries and letting the
driver misbehave if efuse data is invalid. A device is not properly
calibrated if the golden temperature is zero.
Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240604-mtk-thermal-calib-check-v2-1-8f258254051d@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Fri Jun 14 17:26:00 2024 +0200
thermal: core: Change PM notifier priority to the minimum
commit 494c7d055081da066424706b28faa9a4c719d852 upstream.
It is reported that commit 5a5efdaffda5 ("thermal: core: Resume thermal
zones asynchronously") causes battery data in sysfs on Thinkpad P1 Gen2
to become invalid after a resume from S3 (and it is necessary to reboot
the machine to restore correct battery data). Some investigation into
the problem indicated that it happened because, after the commit in
question, the ACPI battery PM notifier ran in parallel with
thermal_zone_device_resume() for one of the thermal zones which
apparently confused the platform firmware on the affected system.
While the exact reason for the firmware confusion remains unclear, it
is arguably not particularly relevant, and the expected behavior of the
affected system can be restored by making the thermal PM notifier run
at the lowest priority which avoids interference between work items
spawned by it and the other PM notifiers (that will run before those
work items now).
Fixes: 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218881
Reported-by: fhortner@yahoo.de
Tested-by: fhortner@yahoo.de
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Date: Tue Jun 18 21:44:24 2024 -0700
thermal: int340x: processor_thermal: Support shared interrupts
commit 096597cfe4ea08b1830e775436d76d7c9d6d3037 upstream.
On some systems the processor thermal device interrupt is shared with
other PCI devices. In this case return IRQ_NONE from the interrupt
handler when the interrupt is not for the processor thermal device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: f0658708e863 ("thermal: int340x: processor_thermal: Use non MSI interrupts by default")
Cc: 6.7+ <stable@vger.kernel.org> # 6.7+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xin Long <lucien.xin@gmail.com>
Date: Sat Jun 15 14:27:20 2024 -0400
tipc: force a dst refcount before doing decryption
[ Upstream commit 2ebe8f840c7450ecbfca9d18ac92e9ce9155e269 ]
As it says in commit 3bc07321ccc2 ("xfrm: Force a dst refcount before
entering the xfrm type handlers"):
"Crypto requests might return asynchronous. In this case we leave the
rcu protected region, so force a refcount on the skb's destination
entry before we enter the xfrm type input/output handlers."
On TIPC decryption path it has the same problem, and skb_dst_force()
should be called before doing decryption to avoid a possible crash.
Shuang reported this issue when this warning is triggered:
[] WARNING: include/net/dst.h:337 tipc_sk_rcv+0x1055/0x1ea0 [tipc]
[] Kdump: loaded Tainted: G W --------- - - 4.18.0-496.el8.x86_64+debug
[] Workqueue: crypto cryptd_queue_worker
[] RIP: 0010:tipc_sk_rcv+0x1055/0x1ea0 [tipc]
[] Call Trace:
[] tipc_sk_mcast_rcv+0x548/0xea0 [tipc]
[] tipc_rcv+0xcf5/0x1060 [tipc]
[] tipc_aead_decrypt_done+0x215/0x2e0 [tipc]
[] cryptd_aead_crypt+0xdb/0x190
[] cryptd_queue_worker+0xed/0x190
[] process_one_work+0x93d/0x17e0
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/fbe3195fad6997a4eec62d9bf076b2ad03ac336b.1718476040.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jeff Johnson <quic_jjohnson@quicinc.com>
Date: Sat May 18 15:54:49 2024 -0700
tracing: Add MODULE_DESCRIPTION() to preemptirq_delay_test
[ Upstream commit 23748e3e0fbfe471eff5ce439921629f6a427828 ]
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/trace/preemptirq_delay_test.o
Link: https://lore.kernel.org/linux-trace-kernel/20240518-md-preemptirq_delay_test-v1-1-387d11b30d85@quicinc.com
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: f96e8577da10 ("lib: Add module for testing preemptoff/irqsoff latency tracers")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Date: Tue Jun 11 22:30:37 2024 +0900
tracing: Build event generation tests only as modules
[ Upstream commit 3572bd5689b0812b161b40279e39ca5b66d73e88 ]
The kprobes and synth event generation test modules add events and lock
(get a reference) those event file reference in module init function,
and unlock and delete it in module exit function. This is because those
are designed for playing as modules.
If we make those modules as built-in, those events are left locked in the
kernel, and never be removed. This causes kprobe event self-test failure
as below.
[ 97.349708] ------------[ cut here ]------------
[ 97.353453] WARNING: CPU: 3 PID: 1 at kernel/trace/trace_kprobe.c:2133 kprobe_trace_self_tests_init+0x3f1/0x480
[ 97.357106] Modules linked in:
[ 97.358488] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.9.0-g699646734ab5-dirty #14
[ 97.361556] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 97.363880] RIP: 0010:kprobe_trace_self_tests_init+0x3f1/0x480
[ 97.365538] Code: a8 24 08 82 e9 ae fd ff ff 90 0f 0b 90 48 c7 c7 e5 aa 0b 82 e9 ee fc ff ff 90 0f 0b 90 48 c7 c7 2d 61 06 82 e9 8e fd ff ff 90 <0f> 0b 90 48 c7 c7 33 0b 0c 82 89 c6 e8 6e 03 1f ff 41 ff c7 e9 90
[ 97.370429] RSP: 0000:ffffc90000013b50 EFLAGS: 00010286
[ 97.371852] RAX: 00000000fffffff0 RBX: ffff888005919c00 RCX: 0000000000000000
[ 97.373829] RDX: ffff888003f40000 RSI: ffffffff8236a598 RDI: ffff888003f40a68
[ 97.375715] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 97.377675] R10: ffffffff811c9ae5 R11: ffffffff8120c4e0 R12: 0000000000000000
[ 97.379591] R13: 0000000000000001 R14: 0000000000000015 R15: 0000000000000000
[ 97.381536] FS: 0000000000000000(0000) GS:ffff88807dcc0000(0000) knlGS:0000000000000000
[ 97.383813] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 97.385449] CR2: 0000000000000000 CR3: 0000000002244000 CR4: 00000000000006b0
[ 97.387347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 97.389277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 97.391196] Call Trace:
[ 97.391967] <TASK>
[ 97.392647] ? __warn+0xcc/0x180
[ 97.393640] ? kprobe_trace_self_tests_init+0x3f1/0x480
[ 97.395181] ? report_bug+0xbd/0x150
[ 97.396234] ? handle_bug+0x3e/0x60
[ 97.397311] ? exc_invalid_op+0x1a/0x50
[ 97.398434] ? asm_exc_invalid_op+0x1a/0x20
[ 97.399652] ? trace_kprobe_is_busy+0x20/0x20
[ 97.400904] ? tracing_reset_all_online_cpus+0x15/0x90
[ 97.402304] ? kprobe_trace_self_tests_init+0x3f1/0x480
[ 97.403773] ? init_kprobe_trace+0x50/0x50
[ 97.404972] do_one_initcall+0x112/0x240
[ 97.406113] do_initcall_level+0x95/0xb0
[ 97.407286] ? kernel_init+0x1a/0x1a0
[ 97.408401] do_initcalls+0x3f/0x70
[ 97.409452] kernel_init_freeable+0x16f/0x1e0
[ 97.410662] ? rest_init+0x1f0/0x1f0
[ 97.411738] kernel_init+0x1a/0x1a0
[ 97.412788] ret_from_fork+0x39/0x50
[ 97.413817] ? rest_init+0x1f0/0x1f0
[ 97.414844] ret_from_fork_asm+0x11/0x20
[ 97.416285] </TASK>
[ 97.417134] irq event stamp: 13437323
[ 97.418376] hardirqs last enabled at (13437337): [<ffffffff8110bc0c>] console_unlock+0x11c/0x150
[ 97.421285] hardirqs last disabled at (13437370): [<ffffffff8110bbf1>] console_unlock+0x101/0x150
[ 97.423838] softirqs last enabled at (13437366): [<ffffffff8108e17f>] handle_softirqs+0x23f/0x2a0
[ 97.426450] softirqs last disabled at (13437393): [<ffffffff8108e346>] __irq_exit_rcu+0x66/0xd0
[ 97.428850] ---[ end trace 0000000000000000 ]---
And also, since we can not cleanup dynamic_event file, ftracetest are
failed too.
To avoid these issues, build these tests only as modules.
Link: https://lore.kernel.org/all/171811263754.85078.5877446624311852525.stgit@devnote2/
Fixes: 9fe41efaca08 ("tracing: Add synth event generation test module")
Fixes: 64836248dda2 ("tracing: Add kprobe event command generation test module")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue Apr 23 09:33:39 2024 -0700
tty: add the option to have a tty reject a new ldisc
[ Upstream commit 6bd23e0c2bb6c65d4f5754d1456bc9a4427fc59b ]
... and use it to limit the virtual terminals to just N_TTY. They are
kind of special, and in particular, the "con_write()" routine violates
the "writes cannot sleep" rule that some ldiscs rely on.
This avoids the
BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659
when N_GSM has been attached to a virtual console, and gsmld_write()
calls con_write() while holding a spinlock, and con_write() then tries
to get the console lock.
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Starke <daniel.starke@siemens.com>
Reported-by: syzbot <syzbot+dbac96d8e73b61aa559c@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=dbac96d8e73b61aa559c
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240423163339.59780-1-torvalds@linux-foundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <kees@kernel.org>
Date: Wed Apr 24 15:40:29 2024 -0700
ubsan: Avoid i386 UBSAN handler crashes with Clang
[ Upstream commit 2e431b23a13ce4459cf484c8f0b3218c7048b515 ]
When generating Runtime Calls, Clang doesn't respect the -mregparm=3
option used on i386. Hopefully this will be fixed correctly in Clang 19:
https://github.com/llvm/llvm-project/pull/89707
but we need to fix this for earlier Clang versions today. Force the
calling convention to use non-register arguments.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://github.com/KSPP/linux/issues/350
Link: https://lore.kernel.org/r/20240424224026.it.216-kees@kernel.org
Acked-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Roman Smirnov <r.smirnov@omp.ru>
Date: Wed Mar 27 16:27:55 2024 +0300
udf: udftime: prevent overflow in udf_disk_stamp_to_time()
[ Upstream commit 3b84adf460381169c085e4bc09e7b57e9e16db0a ]
An overflow can occur in a situation where src.centiseconds
takes the value of 255. This situation is unlikely, but there
is no validation check anywere in the code.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240327132755.13945-1-r.smirnov@omp.ru>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Apr 6 16:01:27 2024 +0200
usb: dwc3: pci: Don't set "linux,phy_charger_detect" property on Lenovo Yoga Tab2 1380
[ Upstream commit 0fb782b5d5c462b2518b3b4fe7d652114c28d613 ]
The Lenovo Yoga Tablet 2 Pro 1380 model is the exception to the rule that
devices which use the Crystal Cove PMIC without using ACPI for battery and
AC power_supply class support use the USB-phy for charger detection.
Unlike the Lenovo Yoga Tablet 2 830 / 1050 models this model has an extra
LC824206XA Micro USB switch which does the charger detection.
Add a DMI quirk to not set the "linux,phy_charger_detect" property on
the 1380 model. This quirk matches on the BIOS version to differentiate
the 1380 model from the 830 and 1050 models which otherwise have
the same DMI strings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240406140127.17885-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Sun Apr 14 17:10:32 2024 +0200
usb: gadget: function: Remove usage of the deprecated ida_simple_xx() API
[ Upstream commit 920e7522e3bab5ebc2fb0cc1a034f4470c87fa97 ]
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7cd361e2b377a5373968fa7deee4169229992a1e.1713107386.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Grzeschik <m.grzeschik@pengutronix.de>
Date: Wed Feb 21 23:14:47 2024 +0100
usb: gadget: uvc: configfs: ensure guid to be valid before set
[ Upstream commit f7a7f80ccc8df017507e2b1e1dd652361374d25b ]
When setting the guid via configfs it is possible to test if
its value is one of the kernel supported ones by calling
uvc_format_by_guid on it. If the result is NULL, we know the
guid is unsupported and can be ignored.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240221-uvc-gadget-configfs-guid-v1-1-f0678ca62ebb@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alex Henrie <alexhenrie24@gmail.com>
Date: Tue Mar 26 09:07:11 2024 -0600
usb: misc: uss720: check for incompatible versions of the Belkin F5U002
[ Upstream commit 3295f1b866bfbcabd625511968e8a5c541f9ab32 ]
The incompatible device in my possession has a sticker that says
"F5U002 Rev 2" and "P80453-B", and lsusb identifies it as
"050d:0002 Belkin Components IEEE-1284 Controller". There is a bug
report from 2007 from Michael Trausch who was seeing the exact same
errors that I saw in 2024 trying to use this cable.
Link: https://lore.kernel.org/all/46DE5830.9060401@trausch.us/
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Link: https://lore.kernel.org/r/20240326150723.99939-5-alexhenrie24@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed Apr 24 05:16:57 2024 +0300
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
[ Upstream commit 718b36a7b49acbba36546371db2d235271ceb06c ]
If a probe function returns -EPROBE_DEFER after creating another device
there is a change of ending up in a probe deferral loop, (see commit
fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER"). In case
of the qcom-pmic-typec driver the tcpm_register_port() function looks up
external resources (USB role switch and inherently via called
typec_register_port() USB-C muxes, switches and retimers).
In order to prevent such probe-defer loops caused by qcom-pmic-typec
driver, use the API added by Johan Hovold and move HPD bridge
registration to the end of the probe function.
The devm_drm_dp_hpd_bridge_add() is called at the end of the probe
function after all TCPM start functions. This is done as a way to
overcome a different problem, the DRM subsystem can not properly cope
with the DRM bridges being destroyed once the bridge is attached. Having
this function call at the end of the probe function prevents possible
DRM bridge device creation followed by destruction in case one of the
TCPM start functions returns an error.
Reported-by: Caleb Connolly <caleb.connolly@linaro.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240424-qc-pmic-typec-hpd-split-v4-1-f7e10d147443@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Mon Apr 8 04:04:17 2024 +0300
usb: typec: ucsi_glink: drop special handling for CCI_BUSY
[ Upstream commit 1a395af9d53c6240bf7799abc43b4dc292ca9dd0 ]
Newer Qualcomm platforms (sm8450+) successfully handle busy state and
send the Command Completion after sending the Busy state. Older devices
have firmware bug and can not continue after sending the CCI_BUSY state,
but the command that leads to CCI_BUSY is already forbidden by the
NO_PARTNER_PDOS quirk.
Follow other UCSI glue drivers and drop special handling for CCI_BUSY
event. Let the UCSI core properly handle this state.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240408-qcom-ucsi-fixes-bis-v1-3-716c145ca4b1@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Fri Mar 29 08:15:40 2024 +0200
usb: typec: ucsi_glink: rework quirks implementation
[ Upstream commit 3f81cf54c1889eeecbb8d9188f5f2f597622170e ]
In preparation to adding more quirks, extract quirks to the static
variables and reference them through match->data. Otherwise adding
more quirks will add the table really cumbersome.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-8-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alex Williamson <alex.williamson@redhat.com>
Date: Fri May 3 08:31:36 2024 -0600
vfio/pci: Collect hot-reset devices to local buffer
[ Upstream commit f6944d4a0b87c16bc34ae589169e1ded3d4db08e ]
Lockdep reports the below circular locking dependency issue. The
mmap_lock acquisition while holding pci_bus_sem is due to the use of
copy_to_user() from within a pci_walk_bus() callback.
Building the devices array directly into the user buffer is only for
convenience. Instead we can allocate a local buffer for the array,
bounded by the number of devices on the bus/slot, fill the device
information into this local buffer, then copy it into the user buffer
outside the bus walk callback.
======================================================
WARNING: possible circular locking dependency detected
6.9.0-rc5+ #39 Not tainted
------------------------------------------------------
CPU 0/KVM/4113 is trying to acquire lock:
ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
but task is already holding lock:
ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&mm->mmap_lock){++++}-{4:4}:
__lock_acquire+0x4e4/0xb90
lock_acquire+0xbc/0x2d0
__might_fault+0x5c/0x80
_copy_to_user+0x1e/0x60
vfio_pci_fill_devs+0x9f/0x130 [vfio_pci_core]
vfio_pci_walk_wrapper+0x45/0x60 [vfio_pci_core]
__pci_walk_bus+0x6b/0xb0
vfio_pci_ioctl_get_pci_hot_reset_info+0x10b/0x1d0 [vfio_pci_core]
vfio_pci_core_ioctl+0x1cb/0x400 [vfio_pci_core]
vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x8d/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #2 (pci_bus_sem){++++}-{4:4}:
__lock_acquire+0x4e4/0xb90
lock_acquire+0xbc/0x2d0
down_read+0x3e/0x160
pci_bridge_wait_for_secondary_bus.part.0+0x33/0x2d0
pci_reset_bus+0xdd/0x160
vfio_pci_dev_set_hot_reset+0x256/0x270 [vfio_pci_core]
vfio_pci_ioctl_pci_hot_reset_groups+0x1a3/0x280 [vfio_pci_core]
vfio_pci_core_ioctl+0x3b5/0x400 [vfio_pci_core]
vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x8d/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&vdev->memory_lock){+.+.}-{4:4}:
__lock_acquire+0x4e4/0xb90
lock_acquire+0xbc/0x2d0
down_write+0x3b/0xc0
vfio_pci_zap_and_down_write_memory_lock+0x1c/0x30 [vfio_pci_core]
vfio_basic_config_write+0x281/0x340 [vfio_pci_core]
vfio_config_do_rw+0x1fa/0x300 [vfio_pci_core]
vfio_pci_config_rw+0x75/0xe50 [vfio_pci_core]
vfio_pci_rw+0xea/0x1a0 [vfio_pci_core]
vfs_write+0xea/0x520
__x64_sys_pwrite64+0x90/0xc0
do_syscall_64+0x8d/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&vdev->vma_lock){+.+.}-{4:4}:
check_prev_add+0xeb/0xcc0
validate_chain+0x465/0x530
__lock_acquire+0x4e4/0xb90
lock_acquire+0xbc/0x2d0
__mutex_lock+0x97/0xde0
vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
__do_fault+0x31/0x160
do_pte_missing+0x65/0x3b0
__handle_mm_fault+0x303/0x720
handle_mm_fault+0x10f/0x460
fixup_user_fault+0x7f/0x1f0
follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1]
vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1]
vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1]
vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1]
vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1]
vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x8d/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
other info that might help us debug this:
Chain exists of:
&vdev->vma_lock --> pci_bus_sem --> &mm->mmap_lock
Possible unsafe locking scenario:
block dm-0: the capability attribute has been deprecated.
CPU0 CPU1
---- ----
rlock(&mm->mmap_lock);
lock(pci_bus_sem);
lock(&mm->mmap_lock);
lock(&vdev->vma_lock);
*** DEADLOCK ***
2 locks held by CPU 0/KVM/4113:
#0: ffff99a25f294888 (&iommu->lock#2){+.+.}-{4:4}, at: vfio_dma_do_map+0x60/0x440 [vfio_iommu_type1]
#1: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1]
stack backtrace:
CPU: 1 PID: 4113 Comm: CPU 0/KVM Not tainted 6.9.0-rc5+ #39
Hardware name: Dell Inc. PowerEdge T640/04WYPY, BIOS 2.15.1 06/16/2022
Call Trace:
<TASK>
dump_stack_lvl+0x64/0xa0
check_noncircular+0x131/0x150
check_prev_add+0xeb/0xcc0
? add_chain_cache+0x10a/0x2f0
? __lock_acquire+0x4e4/0xb90
validate_chain+0x465/0x530
__lock_acquire+0x4e4/0xb90
lock_acquire+0xbc/0x2d0
? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
? lock_is_held_type+0x9a/0x110
__mutex_lock+0x97/0xde0
? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
? lock_acquire+0xbc/0x2d0
? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
? find_held_lock+0x2b/0x80
? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
__do_fault+0x31/0x160
do_pte_missing+0x65/0x3b0
__handle_mm_fault+0x303/0x720
handle_mm_fault+0x10f/0x460
fixup_user_fault+0x7f/0x1f0
follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1]
vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1]
vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1]
vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1]
vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1]
vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x8d/0x170
? rcu_core+0x8d/0x250
? __lock_release+0x5e/0x160
? rcu_core+0x8d/0x250
? lock_release+0x5f/0x120
? sched_clock+0xc/0x30
? sched_clock_cpu+0xb/0x190
? irqtime_account_irq+0x40/0xc0
? __local_bh_enable+0x54/0x60
? __do_softirq+0x315/0x3ca
? lockdep_hardirqs_on_prepare.part.0+0x97/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f8300d0357b
Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007f82ef3fb948 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8300d0357b
RDX: 00007f82ef3fb990 RSI: 0000000000003b71 RDI: 0000000000000023
RBP: 00007f82ef3fb9c0 R08: 0000000000000000 R09: 0000561b7e0bcac2
R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
R13: 0000000200000000 R14: 0000381800000000 R15: 0000000000000000
</TASK>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240503143138.3562116-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Tue Jun 11 04:22:18 2024 -0400
virt: guest_memfd: fix reference leak on hwpoisoned page
commit c31745d2c508796a0996c88bf2e55f552d513f65 upstream.
If kvm_gmem_get_pfn() detects an hwpoisoned page, it returns -EHWPOISON
but it does not put back the reference that kvm_gmem_get_folio() had
grabbed. Add the forgotten folio_put().
Fixes: a7800aa80ea4 ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Cc: stable@vger.kernel.org
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Heng Qi <hengqi@linux.alibaba.com>
Date: Mon Jun 17 21:15:23 2024 +0800
virtio_net: checksum offloading handling fix
[ Upstream commit 604141c036e1b636e2a71cf6e1aa09d1e45f40c2 ]
In virtio spec 0.95, VIRTIO_NET_F_GUEST_CSUM was designed to handle
partially checksummed packets, and the validation of fully checksummed
packets by the device is independent of VIRTIO_NET_F_GUEST_CSUM
negotiation. However, the specification erroneously stated:
"If VIRTIO_NET_F_GUEST_CSUM is not negotiated, the device MUST set flags
to zero and SHOULD supply a fully checksummed packet to the driver."
This statement is inaccurate because even without VIRTIO_NET_F_GUEST_CSUM
negotiation, the device can still set the VIRTIO_NET_HDR_F_DATA_VALID flag.
Essentially, the device can facilitate the validation of these packets'
checksums - a process known as RX checksum offloading - removing the need
for the driver to do so.
This scenario is currently not implemented in the driver and requires
correction. The necessary specification correction[1] has been made and
approved in the virtio TC vote.
[1] https://lists.oasis-open.org/archives/virtio-comment/202401/msg00011.html
Fixes: 4f49129be6fa ("virtio-net: Set RXCSUM feature if GUEST_CSUM is available")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Heng Qi <hengqi@linux.alibaba.com>
Date: Mon Jun 17 21:15:24 2024 +0800
virtio_net: fixing XDP for fully checksummed packets handling
[ Upstream commit 703eec1b242276f2d97d98f04790ddad319ddde4 ]
The XDP program can't correctly handle partially checksummed
packets, but works fine with fully checksummed packets. If the
device has already validated fully checksummed packets, then
the driver doesn't need to re-validate them, saving CPU resources.
Additionally, the driver does not drop all partially checksummed
packets when VIRTIO_NET_F_GUEST_CSUM is not negotiated. This is
not a bug, as the driver has always done this.
Fixes: 436c9453a1ac ("virtio-net: keep vnet header zeroed after processing XDP")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Baochen Qiang <quic_bqiang@quicinc.com>
Date: Thu Apr 25 10:17:40 2024 +0800
wifi: ath12k: check M3 buffer size as well whey trying to reuse it
commit 05090ae82f44570fefddb4e1be1d7e5770d6de40 upstream.
Currently in recovery/resume cases, we do not free M3 buffer but
instead will reuse it. This is done by checking m3_mem->vaddr: if it
is not NULL we believe M3 buffer is ready and go ahead to reuse it.
Note that m3_mem->size is not checked. This is safe for now because
currently M3 reuse logic only gets executed in recovery/resume cases
and the size keeps unchanged in either of them.
However ideally the size should be checked as well, to make the code
safer. So add the check there. Now if that check fails, free old M3
buffer and reallocate a new one.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Fixes: 303c017821d8 ("wifi: ath12k: fix kernel crash during resume")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240425021740.29221-1-quic_bqiang@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Baochen Qiang <quic_bqiang@quicinc.com>
Date: Mon Apr 22 15:11:47 2024 +0300
wifi: ath12k: fix kernel crash during resume
[ Upstream commit 303c017821d88ebad887814114d4e5966d320b28 ]
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus crashed.
So one possible fix would be to free those segments during suspend. This
works because with them freed, ath12k_qmi_free_target_mem_chunk() does
nothing: all segment addresses are NULL so dma_free_coherent() is not called.
But note that ath11k has similar logic but never hits this issue. Reviewing
code there shows the luck comes from QMI memory reuse logic. So the decision
is to port it to ath12k. Like in ath11k, the crash is avoided by adding
prev_size to target_mem_chunk structure and caching real segment size in it,
then prev_size instead of current size is passed to dma_free_coherent(),
no unexpected memory is freed now.
Also reuse m3 buffer.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240419034034.2842-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lingbo Kong <quic_lingbok@quicinc.com>
Date: Tue Apr 30 16:38:38 2024 +0300
wifi: ath12k: fix the problem that down grade phy mode operation
[ Upstream commit bf76b144fe53c7f0de9e294947d903fc7724776f ]
Currently, when using WCN7850 or QCN9274 as AP, ath12k always performs down
grade phy mode operation regardless of whether the firmware supports EHT
capability or not and then vdev will start in HE mode. When stations that
support EHT capability try to connect to the AP, the AP will set phy mode
to EHT after receiving the association request packet, and then send
WMI_PEER_ASSOC_CMDID command to firmware, AP’s firmware will crash.
This is because when the ath12k_mac_copy_sband_iftype_data() function
handles EHT capability, it does not copy the EHT capability into the
iftype[band][type] array according to the interface type. So, interface
type should not be used as an index to get eht_cap in
ath12k_mac_check_down_grade_phy_mode() function.
To address this issue, use types_mask to select the eht_cap in
ath12k_mac_check_down_grade_phy_mode() function.
This patch affects QCN9274 and WCN7850 because they have the same issue.
Hostapd log:
wlo1: STA 02:03:7f:37:12:34 IEEE 802.11: Could not set STA to kernel driver
Kernel log:
[270894.816076] ath12k_pci 0000:03:00.0: failed to send WMI_PEER_SET_PARAM cmd
[270894.816111] ath12k_pci 0000:03:00.0: failed to setup peer SMPS for vdev 0: -108
[270894.816122] ath12k_pci 0000:03:00.0: Failed to associate station: 02:03:7f:37:12:34
[270894.843389] ieee80211 phy5: Hardware restart was requested
[270894.843517] ath12k_pci 0000:03:00.0: failed to lookup peer 02:03:7f:37:12:34 on vdev 0
[270894.843616] ath12k_pci 0000:03:00.0: failed to send WMI_PEER_DELETE cmd
[270894.843650] ath12k_pci 0000:03:00.0: failed to delete peer vdev_id 0 addr 02:03:7f:37:12:34 ret -108
[270894.843663] ath12k_pci 0000:03:00.0: Failed to delete peer: 02:03:7f:37:12:34 for VDEV: 0
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240425083837.5340-1-quic_lingbok@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnd Bergmann <arnd@arndb.de>
Date: Thu Apr 4 09:35:59 2024 +0300
wifi: ath9k: work around memset overflow warning
[ Upstream commit 61752ac69b69ed2e04444d090f6917c77ab36d42 ]
gcc-9 and some other older versions produce a false-positive warning
for zeroing two fields
In file included from include/linux/string.h:369,
from drivers/net/wireless/ath/ath9k/main.c:18:
In function 'fortify_memset_chk',
inlined from 'ath9k_ps_wakeup' at drivers/net/wireless/ath/ath9k/main.c:140:3:
include/linux/fortify-string.h:462:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
462 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Using a struct_group seems to reliably avoid the warning and
not make the code much uglier. The combined memset() should even
save a couple of cpu cycles.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240328135509.3755090-3-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shaul Triebitz <shaul.triebitz@intel.com>
Date: Wed Jun 5 14:05:05 2024 +0300
wifi: iwlwifi: mvm: fix ROC version check
[ Upstream commit 4c2bed6042fb6aca1d1d4f291f85461b1d5ac08c ]
For using the ROC command, check that the ROC version
is *greater or equal* to 3, rather than *equal* to 3.
The ROC version was added to the TLV starting from
version 3.
Fixes: 67ac248e4db0 ("wifi: iwlwifi: mvm: implement ROC version 3")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.93d86cd188ad.Iceadef5a2f3cfa4a127e94a0405eba8342ec89c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Wed Jun 12 12:23:51 2024 +0200
wifi: mac80211: fix monitor channel with chanctx emulation
commit 0d9c2beed116e623ac30810d382bd67163650f98 upstream.
After the channel context emulation, there were reports that
changing the monitor channel no longer works. This is because
those drivers don't have WANT_MONITOR_VIF, so the setting the
channel always exits out quickly.
Fix this by always allocating the virtual monitor sdata, and
simply not telling the driver about it unless it wanted to.
This way, we have an interface/sdata to bind the chanctx to,
and the emulation can work correctly.
Cc: stable@vger.kernel.org
Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers")
Reported-and-tested-by: Savyasaachi Vanga <savyasaachiv@gmail.com>
Closes: https://lore.kernel.org/r/chwoymvpzwtbmzryrlitpwmta5j6mtndocxsyqvdyikqu63lon@gfds653hkknl
Link: https://msgid.link/20240612122351.b12d4a109dde.I1831a44417faaab92bea1071209abbe4efbe3fba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Remi Pommarel <repk@triplefau.lt>
Date: Sat May 18 18:07:33 2024 +0200
wifi: mac80211: Recalc offload when monitor stop
[ Upstream commit 7d09e17c0415fe6d946044c7e70bce31cda952ec ]
When a monitor interface is started, ieee80211_recalc_offload() is
called and 802.11 encapsulation offloading support get disabled so
monitor interface could get native wifi frames directly. But when
this interface is stopped there is no need to keep the 802.11
encpasulation offloading off.
This call ieee80211_recalc_offload() when monitor interface is stopped
so 802.11 encapsulation offloading gets re-activated if possible.
Fixes: 6aea26ce5a4c ("mac80211: rework tx encapsulation offload API")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://msgid.link/840baab454f83718e6e16fd836ac597d924e85b9.1716048326.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Leon Yen <leon.yen@mediatek.com>
Date: Thu Mar 7 17:46:32 2024 +0800
wifi: mt76: mt7921s: fix potential hung tasks during chip recovery
[ Upstream commit ecf0b2b8a37c8464186620bef37812a117ff6366 ]
During chip recovery (e.g. chip reset), there is a possible situation that
kernel worker reset_work is holding the lock and waiting for kernel thread
stat_worker to be parked, while stat_worker is waiting for the release of
the same lock.
It causes a deadlock resulting in the dumping of hung tasks messages and
possible rebooting of the device.
This patch prevents the execution of stat_worker during the chip recovery.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ping-Ke Shih <pkshih@realtek.com>
Date: Fri Mar 29 09:52:50 2024 +0800
wifi: rtw89: 8852c: add quirk to set PCI BER for certain platforms
[ Upstream commit 5b919d726b613c78d4dc463dd9f90c55843fd1b3 ]
Increase PCI BER (bit error rate) count depth setting which could increase
PHY circuit fault tolerance and improve compatibility.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240329015251.22762-4-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Luck <tony.luck@intel.com>
Date: Tue Apr 16 14:19:04 2024 -0700
x86/cpu/vfm: Add new macros to work with (vendor/family/model) values
[ Upstream commit e6dfdc2e89a0adedf455814c91b977d6a584cc88 ]
To avoid adding a slew of new macros for each new Intel CPU family
switch over from providing CPU model number #defines to a new
scheme that encodes vendor, family, and model in a single number.
[ bp: s/casted/cast/g ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416211941.9369-3-tony.luck@intel.com
Stable-dep-of: 93022482b294 ("x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Luck <tony.luck@intel.com>
Date: Mon May 20 15:45:33 2024 -0700
x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL
[ Upstream commit 93022482b2948a9a7e9b5a2bb685f2e1cb4c3348 ]
Code in v6.9 arch/x86/kernel/smpboot.c was changed by commit
4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines") from:
static const struct x86_cpu_id intel_cod_cpu[] = {
X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, 0), /* COD */
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, 0), /* COD */
X86_MATCH_INTEL_FAM6_MODEL(ANY, 1), /* SNC */ <--- 443
{}
};
static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);
to:
static const struct x86_cpu_id intel_cod_cpu[] = {
X86_MATCH_VFM(INTEL_HASWELL_X, 0), /* COD */
X86_MATCH_VFM(INTEL_BROADWELL_X, 0), /* COD */
X86_MATCH_VFM(INTEL_ANY, 1), /* SNC */
{}
};
static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);
On an Intel CPU with SNC enabled this code previously matched the rule on line
443 to avoid printing messages about insane cache configuration. The new code
did not match any rules.
Expanding the macros for the intel_cod_cpu[] array shows that the old is
equivalent to:
static const struct x86_cpu_id intel_cod_cpu[] = {
[0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 },
[1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 },
[2] = { .vendor = 0, .family = 6, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 },
[3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 }
}
while the new code expands to:
static const struct x86_cpu_id intel_cod_cpu[] = {
[0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 },
[1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 },
[2] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 },
[3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 }
}
Looking at the code for x86_match_cpu():
const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match)
{
const struct x86_cpu_id *m;
struct cpuinfo_x86 *c = &boot_cpu_data;
for (m = match;
m->vendor | m->family | m->model | m->steppings | m->feature;
m++) {
...
}
return NULL;
it is clear that there was no match because the ANY entry in the table (array
index 2) is now the loop termination condition (all of vendor, family, model,
steppings, and feature are zero).
So this code was working before because the "ANY" check was looking for any
Intel CPU in family 6. But fails now because the family is a wild card. So the
root cause is that x86_match_cpu() has never been able to match on a rule with
just X86_VENDOR_INTEL and all other fields set to wildcards.
Add a new flags field to struct x86_cpu_id that has a bit set to indicate that
this entry in the array is valid. Update X86_MATCH*() macros to set that bit.
Change the end-marker check in x86_match_cpu() to just check the flags field
for this bit.
Backporter notes: The commit in Fixes is really the one that is broken:
you can't have m->vendor as part of the loop termination conditional in
x86_match_cpu() because it can happen - as it has happened above
- that that whole conditional is 0 albeit vendor == 0 is a valid case
- X86_VENDOR_INTEL is 0.
However, the only case where the above happens is the SNC check added by
4db64279bc2b1 so you only need this fix if you have backported that
other commit
4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines")
Fixes: 644e9cbbe3fc ("Add driver auto probing for x86 features v4")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable+noautosel@kernel.org> # see above
Link: https://lore.kernel.org/r/20240517144312.GBZkdtAOuJZCvxhFbJ@fat_crate.local
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Martin <Dave.Martin@arm.com>
Date: Tue Jun 18 15:01:52 2024 +0100
x86/resctrl: Don't try to free nonexistent RMIDs
[ Upstream commit 739c9765793e5794578a64aab293c58607f1826a ]
Commit
6791e0ea3071 ("x86/resctrl: Access per-rmid structures by index")
adds logic to map individual monitoring groups into a global index space used
for tracking allocated RMIDs.
Attempts to free the default RMID are ignored in free_rmid(), and this works
fine on x86.
With arm64 MPAM, there is a latent bug here however: on platforms with no
monitors exposed through resctrl, each control group still gets a different
monitoring group ID as seen by the hardware, since the CLOSID always forms part
of the monitoring group ID.
This means that when removing a control group, the code may try to free this
group's default monitoring group RMID for real. If there are no monitors
however, the RMID tracking table rmid_ptrs[] would be a waste of memory and is
never allocated, leading to a splat when free_rmid() tries to dereference the
table.
One option would be to treat RMID 0 as special for every CLOSID, but this would
be ugly since bookkeeping still needs to be done for these monitoring group IDs
when there are monitors present in the hardware.
Instead, add a gating check of resctrl_arch_mon_capable() in free_rmid(), and
just do nothing if the hardware doesn't have monitors.
This fix mirrors the gating checks already present in
mkdir_rdt_prepare_rmid_alloc() and elsewhere.
No functional change on x86.
[ bp: Massage commit message. ]
Fixes: 6791e0ea3071 ("x86/resctrl: Access per-rmid structures by index")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240618140152.83154-1-Dave.Martin@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Sat Jun 15 15:42:31 2024 +0000
xfrm6: check ip6_dst_idev() return value in xfrm6_get_saddr()
[ Upstream commit d46401052c2d5614da8efea5788532f0401cb164 ]
ip6_dst_idev() can return NULL, xfrm6_get_saddr() must act accordingly.
syzbot reported:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 12 Comm: kworker/u8:1 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381d4e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Workqueue: wg-kex-wg1 wg_packet_handshake_send_worker
RIP: 0010:xfrm6_get_saddr+0x93/0x130 net/ipv6/xfrm6_policy.c:64
Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 97 00 00 00 4c 8b ab d8 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 86 00 00 00 4d 8b 6d 00 e8 ca 13 47 01 48 b8 00
RSP: 0018:ffffc90000117378 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88807b079dc0 RCX: ffffffff89a0d6d7
RDX: 0000000000000000 RSI: ffffffff89a0d6e9 RDI: ffff88807b079e98
RBP: ffff88807ad73248 R08: 0000000000000007 R09: fffffffffffff000
R10: ffff88807b079dc0 R11: 0000000000000007 R12: ffffc90000117480
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4586d00440 CR3: 0000000079042000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
xfrm_get_saddr net/xfrm/xfrm_policy.c:2452 [inline]
xfrm_tmpl_resolve_one net/xfrm/xfrm_policy.c:2481 [inline]
xfrm_tmpl_resolve+0xa26/0xf10 net/xfrm/xfrm_policy.c:2541
xfrm_resolve_and_create_bundle+0x140/0x2570 net/xfrm/xfrm_policy.c:2835
xfrm_bundle_lookup net/xfrm/xfrm_policy.c:3070 [inline]
xfrm_lookup_with_ifid+0x4d1/0x1e60 net/xfrm/xfrm_policy.c:3201
xfrm_lookup net/xfrm/xfrm_policy.c:3298 [inline]
xfrm_lookup_route+0x3b/0x200 net/xfrm/xfrm_policy.c:3309
ip6_dst_lookup_flow+0x15c/0x1d0 net/ipv6/ip6_output.c:1256
send6+0x611/0xd20 drivers/net/wireguard/socket.c:139
wg_socket_send_skb_to_peer+0xf9/0x220 drivers/net/wireguard/socket.c:178
wg_socket_send_buffer_to_peer+0x12b/0x190 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation+0x227/0x360 drivers/net/wireguard/send.c:40
wg_packet_handshake_send_worker+0x1c/0x30 drivers/net/wireguard/send.c:51
process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
process_scheduled_works kernel/workqueue.c:3312 [inline]
worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240615154231.234442-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mathias Nyman <mathias.nyman@linux.intel.com>
Date: Mon Apr 29 17:02:36 2024 +0300
xhci: remove XHCI_TRUST_TX_LENGTH quirk
[ Upstream commit 34b67198244f2d7d8409fa4eb76204c409c0c97e ]
If this quirk was set then driver would treat transfer events with
'Success' completion code as 'Short packet' if there were untransferred
bytes left.
This is so common that turn it into default behavior.
xhci_warn_ratelimited() is no longer used after this, so remove it.
A success event with untransferred bytes left doesn't always mean a
misbehaving controller. If there was an error mid a multi-TRB TD it's
allowed to issue a success event for the last TRB in that TD.
See xhci 1.2 spec 4.9.1 Transfer Descriptors
"Note: If an error is detected while processing a multi-TRB TD, the xHC
shall generate a Transfer Event for the TRB that the error was detected
on with the appropriate error Condition Code, then may advance to the
next TD. If in the process of advancing to the next TD, a Transfer TRB
is encountered with its IOC flag set, then the Condition Code of the
Transfer Event generated for that Transfer TRB should be Success,
because there was no error actually associated with the TRB that
generated the Event. However, an xHC implementation may redundantly
assert the original error Condition Code."
Co-developed-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240429140245.3955523-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>