Author: Gautham R. Shenoy <gautham.shenoy@amd.com>
Date: Thu May 29 14:21:43 2025 +0530
acpi-cpufreq: Fix nominal_freq units to KHz in get_max_boost_ratio()
commit cb6a85f38f456b086c366e346ebb67ffa70c7243 upstream.
commit 083466754596 ("cpufreq: ACPI: Fix max-frequency computation")
modified get_max_boost_ratio() to return the nominal_freq advertised
in the _CPC object. This was for the purposes of computing the maximum
frequency. The frequencies advertised in _CPC objects are in
MHz. However, cpufreq expects the frequency to be in KHz. Since the
nominal_freq returned by get_max_boost_ratio() was not in KHz but
instead in MHz,the cpuinfo_max_frequency that was computed using this
nominal_freq was incorrect and an invalid value which resulted in
cpufreq reporting the P0 frequency as the cpuinfo_max_freq.
Fix this by converting the nominal_freq to KHz before returning the
same from get_max_boost_ratio().
Reported-by: Manu Bretelle <chantr4@gmail.com>
Closes: https://lore.kernel.org/lkml/aDaB63tDvbdcV0cg@HQ-GR2X1W2P57/
Fixes: 083466754596 ("cpufreq: ACPI: Fix max-frequency computation")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Cc: 6.14+ <stable@vger.kernel.org> # 6.14+
Link: https://patch.msgid.link/20250529085143.709-1-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yunhui Cui <cuiyunhui@bytedance.com>
Date: Wed Jun 4 10:30:36 2025 +0800
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
[ Upstream commit 15eece6c5b05e5f9db0711978c3e3b7f1a2cfe12 ]
With nosmp in cmdline, other CPUs are not brought up, leaving
their cpc_desc_ptr NULL. CPU0's iteration via for_each_possible_cpu()
dereferences these NULL pointers, causing panic.
Panic backtrace:
[ 0.401123] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b8
...
[ 0.403255] [<ffffffff809a5818>] cppc_allow_fast_switch+0x6a/0xd4
...
Kernel panic - not syncing: Attempted to kill init!
Fixes: 3cc30dd00a58 ("cpufreq: CPPC: Enable fast_switch")
Reported-by: Xu Lu <luxu.kernel@bytedance.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://patch.msgid.link/20250604023036.99553-1-cuiyunhui@bytedance.com
[ rjw: New subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Armin Wolf <W_Armin@gmx.de>
Date: Thu Apr 10 18:54:54 2025 +0200
ACPI: OSI: Stop advertising support for "3.0 _SCP Extensions"
[ Upstream commit 8cf4fdac9bdead7bca15fc56fdecdf78d11c3ec6 ]
As specified in section 5.7.2 of the ACPI specification the feature
group string "3.0 _SCP Extensions" implies that the operating system
evaluates the _SCP control method with additional parameters.
However the ACPI thermal driver evaluates the _SCP control method
without those additional parameters, conflicting with the above
feature group string advertised to the firmware thru _OSI.
Stop advertising support for this feature string to avoid confusing
the ACPI firmware.
Fixes: e5f660ebef68 ("ACPI / osi: Collect _OSI handling into one single file")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20250410165456.4173-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniil Tatianin <d-tatianin@yandex-team.ru>
Date: Tue Apr 1 21:43:11 2025 +0300
ACPICA: exserial: don't forget to handle FFixedHW opregions for reading
[ Upstream commit 0f8af0356a45547683a216e4921006a3c6a6d922 ]
The initial commit that introduced support for FFixedHW operation
regions did add a special case in the AcpiExReadSerialBus If, but
forgot to actually handle it inside the switch, so add the missing case
to prevent reads from failing with AE_AML_INVALID_SPACE_ID.
Link: https://github.com/acpica/acpica/pull/998
Fixes: ee64b827a9a ("ACPICA: Add support for FFH Opregion special context data")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Link: https://patch.msgid.link/20250401184312.599962-1-d-tatianin@yandex-team.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Heimann <d@dmeh.net>
Date: Sun Jun 1 12:41:16 2025 -0400
ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1
commit 6a3439a417b910e662c666993798e0691bc81147 upstream.
The RODE AI-1 audio interface requires implicit feedback sync between
playback endpoint 0x03 and feedback endpoint 0x84 on interface 3, but
doesn't advertise this in its USB descriptors.
Without this quirk, the device receives audio data but produces no output.
Signed-off-by: David Heimann <d@dmeh.net>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/084dc88c-1193-4a94-a002-5599adff936c@app.fastmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Wed Apr 9 17:39:58 2025 +0100
arm64/fpsimd: Avoid RES0 bits in the SME trap handler
[ Upstream commit 95507570fb2f75544af69760cd5d8f48fc5c7f20 ]
The SME trap handler consumes RES0 bits from the ESR when determining
the reason for the trap, and depends upon those bits reading as zero.
This may break in future when those RES0 bits are allocated a meaning
and stop reading as zero.
For SME traps taken with ESR_ELx.EC == 0b011101, the specific reason for
the trap is indicated by ESR_ELx.ISS.SMTC ("SME Trap Code"). This field
occupies bits [2:0] of ESR_ELx.ISS, and as of ARM DDI 0487 L.a, bits
[24:3] of ESR_ELx.ISS are RES0. ESR_ELx.ISS itself occupies bits [24:0]
of ESR_ELx.
Extract the SMTC field specifically, matching the way we handle ESR_ELx
fields elsewhere, and ensuring that the handler is future-proof.
Fixes: 8bd7f91c03d8 ("arm64/sme: Implement traps and syscall handling for SME")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Brown <broonie@kernel.org>
Date: Wed Apr 9 17:40:02 2025 +0100
arm64/fpsimd: Discard stale CPU state when handling SME traps
[ Upstream commit d3eaab3c70905c5467e5c4ea403053d67505adeb ]
The logic for handling SME traps manipulates saved FPSIMD/SVE/SME state
incorrectly, and a race with preemption can result in a task having
TIF_SME set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SME traps enabled). This can result in warnings from
do_sme_acc() where SME traps are not expected while TIF_SME is set:
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
This is very similar to the SVE issue we fixed in commit:
751ecf6afd6568ad ("arm64/sve: Discard stale CPU state when handling SVE traps")
The race can occur when the SME trap handler is preempted before and
after manipulating the saved FPSIMD/SVE/SME state, starting and ending on
the same CPU, e.g.
| void do_sme_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SME clear, SME traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
|
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| unsigned long vq_minus_one =
| sve_vq_from_vl(task_get_sme_vl(current)) - 1;
| sme_set_vq(vq_minus_one);
|
| fpsimd_bind_task_to_cpu();
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SME traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
Note: this was originallly posted as [1].
Fixes: 8bd7f91c03d8 ("arm64/sme: Implement traps and syscall handling for SME")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/linux-arm-kernel/20241204-arm64-sme-reenable-v2-1-bae87728251d@kernel.org/
[ Rutland: rewrite commit message ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Thu May 8 14:26:21 2025 +0100
arm64/fpsimd: Do not discard modified SVE state
[ Upstream commit 398edaa12f9cf2be7902f306fc023c20e3ebd3e4 ]
Historically SVE state was discarded deterministically early in the
syscall entry path, before ptrace is notified of syscall entry. This
permitted ptrace to modify SVE state before and after the "real" syscall
logic was executed, with the modified state being retained.
This behaviour was changed by commit:
8c845e2731041f0f ("arm64/sve: Leave SVE enabled on syscall if we don't context switch")
That commit was intended to speed up workloads that used SVE by
opportunistically leaving SVE enabled when returning from a syscall.
The syscall entry logic was modified to truncate the SVE state without
disabling userspace access to SVE, and fpsimd_save_user_state() was
modified to discard userspace SVE state whenever
in_syscall(current_pt_regs()) is true, i.e. when
current_pt_regs()->syscallno != NO_SYSCALL.
Leaving SVE enabled opportunistically resulted in a couple of changes to
userspace visible behaviour which weren't described at the time, but are
logical consequences of opportunistically leaving SVE enabled:
* Signal handlers can observe the type of saved state in the signal's
sve_context record. When the kernel only tracks FPSIMD state, the 'vq'
field is 0 and there is no space allocated for register contents. When
the kernel tracks SVE state, the 'vq' field is non-zero and the
register contents are saved into the record.
As a result of the above commit, 'vq' (and the presence of SVE
register state) is non-deterministically zero or non-zero for a period
of time after a syscall. The effective register state is still
deterministic.
Hopefully no-one relies on this being deterministic. In general,
handlers for asynchronous events cannot expect a deterministic state.
* Similarly to signal handlers, ptrace requests can observe the type of
saved state in the NT_ARM_SVE and NT_ARM_SSVE regsets, as this is
exposed in the header flags. As a result of the above commit, this is
now in a non-deterministic state after a syscall. The effective
register state is still deterministic.
Hopefully no-one relies on this being deterministic. In general,
debuggers would have to handle this changing at arbitrary points
during program flow.
Discarding the SVE state within fpsimd_save_user_state() resulted in
other changes to userspace visible behaviour which are not desirable:
* A ptrace tracer can modify (or create) a tracee's SVE state at syscall
entry or syscall exit. As a result of the above commit, the tracee's
SVE state can be discarded non-deterministically after modification,
rather than being retained as it previously was.
Note that for co-operative tracer/tracee pairs, the tracer may
(re)initialise the tracee's state arbitrarily after the tracee sends
itself an initial SIGSTOP via a syscall, so this affects realistic
design patterns.
* The current_pt_regs()->syscallno field can be modified via ptrace, and
can be altered even when the tracee is not really in a syscall,
causing non-deterministic discarding to occur in situations where this
was not previously possible.
Further, using current_pt_regs()->syscallno in this way is unsound:
* There are data races between readers and writers of the
current_pt_regs()->syscallno field.
The current_pt_regs()->syscallno field is written in interruptible
task context using plain C accesses, and is read in irq/softirq
context using plain C accesses. These accesses are subject to data
races, with the usual concerns with tearing, etc.
* Writes to current_pt_regs()->syscallno are subject to compiler
reordering.
As current_pt_regs()->syscallno is written with plain C accesses,
the compiler is free to move those writes arbitrarily relative to
anything which doesn't access the same memory location.
In theory this could break signal return, where prior to restoring the
SVE state, restore_sigframe() calls forget_syscall(). If the write
were hoisted after restore of some SVE state, that state could be
discarded unexpectedly.
In practice that reordering cannot happen in the absence of LTO (as
cross compilation-unit function calls happen prevent this reordering),
and that reordering appears to be unlikely in the presence of LTO.
Additionally, since commit:
f130ac0ae4412dbe ("arm64: syscall: unmask DAIF earlier for SVCs")
... DAIF is unmasked before el0_svc_common() sets regs->syscallno to the
real syscall number. Consequently state may be saved in SVE format prior
to this point.
Considering all of the above, current_pt_regs()->syscallno should not be
used to infer whether the SVE state can be discarded. Luckily we can
instead use cpu_fp_state::to_save to track when it is safe to discard
the SVE state:
* At syscall entry, after the live SVE register state is truncated, set
cpu_fp_state::to_save to FP_STATE_FPSIMD to indicate that only the
FPSIMD portion is live and needs to be saved.
* At syscall exit, once the task's state is guaranteed to be live, set
cpu_fp_state::to_save to FP_STATE_CURRENT to indicate that TIF_SVE
must be considered to determine which state needs to be saved.
* Whenever state is modified, it must be saved+flushed prior to
manipulation. The state will be truncated if necessary when it is
saved, and reloading the state will set fp_state::to_save to
FP_STATE_CURRENT, preventing subsequent discarding.
This permits SVE state to be discarded *only* when it is known to have
been truncated (and the non-FPSIMD portions must be zero), and ensures
that SVE state is retained after it is explicitly modified.
For backporting, note that this fix depends on the following commits:
* b2482807fbd4 ("arm64/sme: Optimise SME exit on syscall entry")
* f130ac0ae441 ("arm64: syscall: unmask DAIF earlier for SVCs")
* 929fa99b1215 ("arm64/fpsimd: signal: Always save+flush state early")
Fixes: 8c845e273104 ("arm64/sve: Leave SVE enabled on syscall if we don't context switch")
Fixes: f130ac0ae441 ("arm64: syscall: unmask DAIF earlier for SVCs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250508132644.1395904-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Wed Apr 9 17:40:06 2025 +0100
arm64/fpsimd: Fix merging of FPSIMD state during signal return
[ Upstream commit c94f2f326146a34066a0070ed90b8bc656b1842f ]
For backwards compatibility reasons, when a signal return occurs which
restores SVE state, the effective lower 128 bits of each of the SVE
vector registers are restored from the corresponding FPSIMD vector
register in the FPSIMD signal frame, overriding the values in the SVE
signal frame. This is intended to be the case regardless of streaming
mode.
To make this happen, restore_sve_fpsimd_context() uses
fpsimd_update_current_state() to merge the lower 128 bits from the
FPSIMD signal frame into the SVE register state. Unfortunately,
fpsimd_update_current_state() performs this merging dependent upon
TIF_SVE, which is not always correct for streaming SVE register state:
* When restoring non-streaming SVE register state there is no observable
problem, as the signal return code configures TIF_SVE and the saved
fp_type to match before calling fpsimd_update_current_state(), which
observes either:
- TIF_SVE set AND fp_type == FP_STATE_SVE
- TIF_SVE clear AND fp_type == FP_STATE_FPSIMD
* On systems which have SME but not SVE, TIF_SVE cannot be set. Thus the
merging will never happen for the streaming SVE register state.
* On systems which have SVE and SME, TIF_SVE can be set and cleared
independently of PSTATE.SM. Thus the merging may or may not happen for
streaming SVE register state.
As TIF_SVE can be cleared non-deterministically during syscalls
(including at the start of sigreturn()), the merging may occur
non-deterministically from the perspective of userspace.
This logic has been broken since its introduction in commit:
85ed24dad2904f7c ("arm64/sme: Implement streaming SVE signal handling")
... at which point both fpsimd_signal_preserve_current_state() and
fpsimd_update_current_state() only checked TIF SVE. When PSTATE.SM==1
and TIF_SVE was clear, signal delivery would place stale FPSIMD state
into the FPSIMD signal frame, and signal return would not merge this
into the restored register state.
Subsequently, signal delivery was fixed as part of commit:
61da7c8e2a602f66 ("arm64/signal: Don't assume that TIF_SVE means we saved SVE state")
... but signal restore was not given a corresponding fix, and when
TIF_SVE was clear, signal restore would still fail to merge the FPSIMD
state into the restored SVE register state. The 'Fixes' tag did not
indicate that this had been broken since its introduction.
Fix this by merging the FPSIMD state dependent upon the saved fp_type,
matching what we (currently) do during signal delivery.
As described above, when backporting this commit, it will also be
necessary to backport commit:
61da7c8e2a602f66 ("arm64/signal: Don't assume that TIF_SVE means we saved SVE state")
... and prior to commit:
baa8515281b30861 ("arm64/fpsimd: Track the saved FPSIMD state type separately to TIF_SVE")
... it will be necessary for fpsimd_signal_preserve_current_state() and
fpsimd_update_current_state() to consider both TIF_SVE and
thread_sm_enabled(¤t->thread), in place of the saved fp_type.
Fixes: 85ed24dad290 ("arm64/sme: Implement streaming SVE signal handling")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-10-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vignesh Raman <vignesh.raman@collabora.com>
Date: Mon May 12 18:49:24 2025 +0530
arm64: defconfig: mediatek: enable PHY drivers
[ Upstream commit f52cd248d844f9451858992f924988ac413fdc7e ]
The mediatek display driver fails to probe on mt8173-elm-hana and
mt8183-kukui-jacuzzi-juniper-sku16 in v6.14-rc4 due to missing PHY
configurations.
Commit 924d66011f24 ("drm/mediatek: stop selecting foreign drivers")
stopped selecting the MediaTek PHY drivers, requiring them to be
explicitly enabled in defconfig.
Enable the following PHY drivers for MediaTek platforms:
CONFIG_PHY_MTK_HDMI=m for HDMI display
CONFIG_PHY_MTK_MIPI_DSI=m for DSI display
CONFIG_PHY_MTK_DP=m for DP display
Fixes: 924d66011f24 ("drm/mediatek: stop selecting foreign drivers")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Link: https://lore.kernel.org/r/20250512131933.1247830-1-vignesh.raman@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adam Ford <aford173@gmail.com>
Date: Tue Apr 15 20:01:27 2025 -0500
arm64: dts: imx8mm-beacon: Fix RTC capacitive load
[ Upstream commit 2e98d456666d63f897ba153210bcef9d78ba0f3a ]
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adam Ford <aford173@gmail.com>
Date: Tue Apr 15 20:01:30 2025 -0500
arm64: dts: imx8mm-beacon: Set SAI5 MCLK direction to output for HDMI audio
[ Upstream commit 8c716f80dfe8cd6ed9a2696847cea1affeeff6ff ]
The HDMI bridge chip fails to generate an audio source due to the SAI5
master clock (MCLK) direction not being set to output. This prevents proper
clocking of the HDMI audio interface.
Add the `fsl,sai-mclk-direction-output` property to the SAI5 node to ensure
the MCLK is driven by the SoC, resolving the HDMI sound issue.
Fixes: 8ad7d14d99f3 ("arm64: dts: imx8mm-beacon: Add HDMI video with sound")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adam Ford <aford173@gmail.com>
Date: Tue Apr 15 20:01:28 2025 -0500
arm64: dts: imx8mn-beacon: Fix RTC capacitive load
[ Upstream commit c3f03bec30efd5082b55876846d57b5d17dae7b9 ]
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 36ca3c8ccb53 ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adam Ford <aford173@gmail.com>
Date: Tue Apr 15 20:01:31 2025 -0500
arm64: dts: imx8mn-beacon: Set SAI5 MCLK direction to output for HDMI audio
[ Upstream commit a747c4dd2a60c4d0179b372032a4b98548135096 ]
The HDMI bridge chip fails to generate an audio source due to the SAI5
master clock (MCLK) direction not being set to output. This prevents proper
clocking of the HDMI audio interface.
Add the `fsl,sai-mclk-direction-output` property to the SAI5 node to ensure
the MCLK is driven by the SoC, resolving the HDMI sound issue.
Fixes: 1d6880ceef43 ("arm64: dts: imx8mn-beacon: Add HDMI video with sound")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adam Ford <aford173@gmail.com>
Date: Tue Apr 15 20:01:29 2025 -0500
arm64: dts: imx8mp-beacon: Fix RTC capacitive load
[ Upstream commit 6821ee17537938e919e8b86a541aae451f73165b ]
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 25a5ccdce767 ("arm64: dts: freescale: Introduce imx8mp-beacon-kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Date: Fri May 2 11:32:10 2025 -0400
arm64: dts: mediatek: mt6357: Drop regulator-fixed compatibles
[ Upstream commit d77e89b7b03fb945b4353f2dcc4a70b34baa7bcb ]
Some of the regulators in the MT6357 PMIC dtsi have compatible set to
regulator-fixed, even though they don't serve any purpose: all those
regulators are handled as a whole by the mt6357-regulator driver. In
fact this is the only dtsi in this family of chips where this is the
case: mt6359 and mt6358 don't have any such compatibles.
A side-effect caused by this is that the DT kselftest, which is supposed
to identify nodes with compatibles that can be probed, but haven't,
shows these nodes as failures.
Remove the useless compatibles to move the dtsi in line with the others
in its family and fix the DT kselftest failures.
Fixes: 55749bb478f8 ("arm64: dts: mediatek: add mt6357 device-tree")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250502-mt6357-regulator-fixed-compatibles-removal-v1-1-a582c16743fe@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Wed Apr 2 11:06:15 2025 +0200
arm64: dts: mediatek: mt8195: Reparent vdec1/2 and venc1 power domains
[ Upstream commit 394f29033324e2317bfd6a7ed99b9a60832b36a2 ]
By hardware, the first and second core of the video decoder IP
need the VDEC_SOC to be powered up in order to be able to be
accessed (both internally, by firmware, and externally, by the
kernel).
Similarly, for the video encoder IP, the second core needs the
first core to be powered up in order to be accessible.
Fix that by reparenting the VDEC1/2 power domains to be children
of VDEC0 (VDEC_SOC), and the VENC1 to be a child of VENC0.
Fixes: 2b515194bf0c ("arm64: dts: mt8195: Add power domains controller")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250402090615.25871-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Julien Massot <julien.massot@collabora.com>
Date: Mon May 5 15:23:39 2025 +0200
arm64: dts: mt6359: Add missing 'compatible' property to regulators node
[ Upstream commit 1fe38d2a19950fa6dbc384ee8967c057aef9faf4 ]
The 'compatible' property is required by the
'mfd/mediatek,mt6397.yaml' binding. Add it to fix the following
dtb-check error:
mediatek/mt8395-radxa-nio-12l.dtb: pmic: regulators:
'compatible' is a required property
Fixes: 3b7d143be4b7 ("arm64: dts: mt6359: add PMIC MT6359 related nodes")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/r/20250505-mt8395-dtb-errors-v1-3-9c4714dcdcdb@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Julien Massot <julien.massot@collabora.com>
Date: Wed May 14 10:19:58 2025 +0200
arm64: dts: mt6359: Rename RTC node to match binding expectations
[ Upstream commit cfe035d8662cfbd6edff9bd89c4b516bbb34c350 ]
Rename the node 'mt6359rtc' to 'rtc', as required by the binding.
Fix the following dtb-check error:
mediatek/mt8395-radxa-nio-12l.dtb: pmic: 'mt6359rtc' do not match
any of the regexes: 'pinctrl-[0-9]+'
Fixes: 3b7d143be4b7 ("arm64: dts: mt6359: add PMIC MT6359 related nodes")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250514-mt8395-dtb-errors-v2-3-d67b9077c59a@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stephan Gerhold <stephan.gerhold@linaro.org>
Date: Tue Dec 3 18:44:02 2024 +0100
arm64: dts: qcom: sc8280xp-x13s: Drop duplicate DMIC supplies
[ Upstream commit a2e617f4e6981aa514a569e927f90b0d39bb31b2 ]
The WCD938x codec provides two controls for each of the MIC_BIASn outputs:
- "MIC BIASn" enables an internal regulator to generate the output
with a configurable voltage (qcom,micbiasN-microvolt).
- "VA MIC BIASn" enables "pull-up mode" that bypasses the internal
regulator and directly outputs fixed 1.8V from the VDD_PX pin.
This is intended for low-power VA (voice activation) use cases.
The audio-routing setup for the ThinkPad X13s currently specifies both
as power supplies for the DMICs, but only one of them can be active
at the same time. In practice, only the internal regulator is used
with the current setup because the driver prefers it over pull-up mode.
Make this more clear by dropping the redundant routes to the pull-up
"VA MIC BIASn" supply. There is no functional difference except that we
skip briefly switching to pull-up mode when shutting down the microphone.
Fixes: 2e498f35c385 ("arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20241203-x1e80100-va-mic-bias-v1-1-0dfd4d9b492c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexey Minnekhanov <alexeymin@postmarketos.org>
Date: Sun May 4 14:51:20 2025 +0300
arm64: dts: qcom: sda660-ifc6560: Fix dt-validate warning
[ Upstream commit f5110806b41eaa0eb0ab1bf2787876a580c6246c ]
If you remove clocks property, you should remove clock-names, too.
Fixes warning with dtbs check:
'clocks' is a dependency of 'clock-names'
Fixes: 34279d6e3f32c ("arm64: dts: qcom: sdm660: Add initial Inforce IFC6560 board support")
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250504115120.1432282-4-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexey Minnekhanov <alexeymin@postmarketos.org>
Date: Sun May 4 14:51:19 2025 +0300
arm64: dts: qcom: sdm660-lavender: Add missing USB phy supply
[ Upstream commit dbf62a117a1b7f605a98dd1fd1fd6c85ec324ea0 ]
Fixes the following dtbs check error:
phy@c012000: 'vdda-pll-supply' is a required property
Fixes: e5d3e752b050e ("arm64: dts: qcom: sdm660-xiaomi-lavender: Add USB")
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250504115120.1432282-3-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexey Minnekhanov <alexeymin@postmarketos.org>
Date: Tue Apr 15 16:01:01 2025 +0300
arm64: dts: qcom: sdm660-xiaomi-lavender: Add missing SD card detect GPIO
[ Upstream commit 2eca6af66709de0d1ba14cdf8b6d200a1337a3a2 ]
During initial porting these cd-gpios were missed. Having card detect is
beneficial because driver does not need to do polling every second and it
can just use IRQ. SD card detection in U-Boot is also fixed by this.
Fixes: cf85e9aee210 ("arm64: dts: qcom: sdm660-xiaomi-lavender: Add eMMC and SD")
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415130101.1429281-1-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dzmitry Sankouski <dsankouski@gmail.com>
Date: Tue Feb 25 19:38:54 2025 +0300
arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake
[ Upstream commit 242e4126ee007b95765c21a9d74651fdcf221f2b ]
Usb regulator was wrongly pointed to vreg_l1a_0p875.
However, on starqltechn it's powered from vreg_l5a_0p8.
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-3-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dzmitry Sankouski <dsankouski@gmail.com>
Date: Tue Feb 25 19:38:55 2025 +0300
arm64: dts: qcom: sdm845-starqltechn: refactor node order
[ Upstream commit cba1dd3d851ebc1b6c5ae4000208a9753320694b ]
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-4-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dzmitry Sankouski <dsankouski@gmail.com>
Date: Tue Feb 25 19:38:56 2025 +0300
arm64: dts: qcom: sdm845-starqltechn: remove excess reserved gpios
[ Upstream commit fb5fce873b952f8b1c5f7edcabcc8611ef45ea7a ]
Starqltechn has 2 reserved gpio ranges <27 4>, <85 4>.
<27 4> is spi for eSE(embedded Secure Element).
<85 4> is spi for fingerprint.
Remove excess reserved gpio regions.
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-5-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dzmitry Sankouski <dsankouski@gmail.com>
Date: Tue Feb 25 19:38:53 2025 +0300
arm64: dts: qcom: sdm845-starqltechn: remove wifi
[ Upstream commit 2d3dd4b237638853b8a99353401ab8d88a6afb6c ]
Starqltechn has broadcom chip for wifi, so sdm845 wifi part
can be disabled.
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-2-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xilin Wu <wuxilin123@gmail.com>
Date: Sat Mar 8 18:27:51 2025 +0800
arm64: dts: qcom: sm8250: Fix CPU7 opp table
[ Upstream commit 28f997b89967afdc0855d8aa7538b251fb44f654 ]
There is a typo in cpu7_opp9. Fix it to get rid of the following
errors.
[ 0.198043] cpu cpu7: Voltage update failed freq=1747200
[ 0.198052] cpu cpu7: failed to update OPP for freq=1747200
Fixes: 8e0e8016cb79 ("arm64: dts: qcom: sm8250: Add CPU opp tables")
Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250308-fix-sm8250-cpufreq-v1-1-8a0226721399@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luca Weiss <luca.weiss@fairphone.com>
Date: Wed Feb 12 18:03:47 2025 +0100
arm64: dts: qcom: sm8350: Reenable crypto & cryptobam
[ Upstream commit 75eefd474469abf95aa9ef6da8161d69f86b98b4 ]
When num-channels and qcom,num-ees is not provided in devicetree, the
driver will try to read these values from the registers during probe but
this fails if the interconnect is not on and then crashes the system.
So we can provide these properties in devicetree (queried after patching
BAM driver to enable the necessary interconnect) so we can probe
cryptobam without reading registers and then also use the QCE as
expected.
Fixes: 4d29db204361 ("arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot")
Fixes: f1040a7fe8f0 ("arm64: dts: qcom: sm8350: Add Crypto Engine support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-1-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Date: Mon May 19 06:43:24 2025 +0000
arm64: dts: renesas: white-hawk-ard-audio: Fix TPU0 groups
[ Upstream commit 652eea251dd852f02cef6223f367220acb3d1867 ]
White Hawk ARD audio uses a clock generated by the TPU, but commit
3d144ef10a44 ("pinctrl: renesas: r8a779g0: Fix TPU suffixes") renamed
pin group "tpu_to0_a" to "tpu_to0_b". Update DTS accordingly otherwise
the sound driver does not receive a clock signal.
Fixes: 3d144ef10a448f89 ("pinctrl: renesas: r8a779g0: Fix TPU suffixes")
Signed-off-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/TYCPR01MB8740608B675365215ADB0374B49CA@TYCPR01MB8740.jpnprd01.prod.outlook.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Quentin Schulz <quentin.schulz@cherry.de>
Date: Fri Apr 25 17:18:10 2025 +0200
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou
[ Upstream commit febd8c6ab52c683b447fe22fc740918c86feae43 ]
The u2phy0_host port is the part of the USB PHY0 (namely the
HOST0_DP/DM lanes) which routes directly to the USB2.0 HOST
controller[1]. The other lanes of the PHY are routed to the USB3.0 OTG
controller (dwc3), which we do use.
The HOST0_DP/DM lanes aren't routed on RK3399 Puma so let's simply
disable the USB2.0 controllers.
USB3 OTG has been known to be unstable on RK3399 Puma Haikou for a
while, one of the recurring issues being that only USB2 is detected and
not USB3 in host mode. Reading the justification above and seeing that
we are keeping u2phy0_host in the Haikou carrierboard DTS probably may
have bothered you since it should be changed to u2phy0_otg. The issue is
that if it's switched to that, USB OTG on Haikou is entirely broken. I
have checked the routing in the Gerber file, the lanes are going to the
expected ball pins (that is, NOT HOST0_DP/DM).
u2phy0_host is for sure the wrong part of the PHY to use, but it's the
only one that works at the moment for that board so keep it until we
figure out what exactly is broken.
No intended functional change.
[1] https://rockchip.fr/Rockchip%20RK3399%20TRM%20V1.3%20Part2.pdf
Chapter 2 USB2.0 PHY
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-5-4a76a474a010@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Robinson <pbrobinson@gmail.com>
Date: Tue May 6 23:25:28 2025 +0100
arm64: dts: rockchip: Update eMMC for NanoPi R5 series
[ Upstream commit 8eca9e979a1efbcc3d090f6eb3f4da621e7c87e0 ]
Add the 3.3v and 1.8v regulators that are connected to
the eMMC on the R5 series devices, as well as adding the
eMMC data strobe, and enable eMMC HS200 mode as the
Foresee FEMDNN0xxG-A3A55 modules support it.
Fixes: c8ec73b05a95d ("arm64: dts: rockchip: create common dtsi for NanoPi R5 series")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250506222531.625157-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Judith Mendez <jm@ti.com>
Date: Tue Apr 29 12:30:08 2025 -0500
arm64: dts: ti: k3-am65-main: Add missing taps to sdhci0
[ Upstream commit f55c9f087cc2e2252d44ffd9d58def2066fc176e ]
For am65x, add missing ITAPDLYSEL values for Default Speed and High
Speed SDR modes to sdhci0 node according to the device datasheet [0].
[0] https://www.ti.com/lit/gpn/am6548
Fixes: eac99d38f861 ("arm64: dts: ti: k3-am654-main: Update otap-del-sel values")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://lore.kernel.org/r/20250429173009.33994-1-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Judith Mendez <jm@ti.com>
Date: Tue Apr 23 10:17:28 2024 -0500
arm64: dts: ti: k3-am65-main: Fix sdhci node properties
[ Upstream commit 8ffe9cb889f2b831a9d5bbb1f7ad42d30e31170f ]
Update otap-del-sel properties as per datasheet [0].
Add missing clkbuf-sel and itap-del-sel values also as per
datasheet [0].
Move clkbuf-sel and ti,trm-icp above the otap-del-sel properties
so the sdhci nodes could be more uniform across platforms.
[0] https://www.ti.com/lit/ds/symlink/am6548.pdf
Fixes: eac99d38f861 ("arm64: dts: ti: k3-am654-main: Update otap-del-sel values")
Fixes: d7600d070fb0 ("arm64: dts: ti: k3-am65-main: Add support for sdhci1")
Signed-off-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240423151732.3541894-2-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Stable-dep-of: f55c9f087cc2 ("arm64: dts: ti: k3-am65-main: Add missing taps to sdhci0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Prasanth Babu Mantena <p-mantena@ti.com>
Date: Wed May 7 10:37:01 2025 +0530
arm64: dts: ti: k3-j721e-common-proc-board: Enable OSPI1 on J721E
[ Upstream commit 6b8deb2ff0d31848c43a73f6044e69ba9276b3ec ]
J721E SoM has MT25QU512AB Serial NOR flash connected to
OSPI1 controller. Enable ospi1 node in device tree.
Fixes: 73676c480b72 ("arm64: dts: ti: k3-j721e: Enable OSPI nodes at the board level")
Signed-off-by: Prasanth Babu Mantena <p-mantena@ti.com>
Link: https://lore.kernel.org/r/20250507050701.3007209-1-p-mantena@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Date: Tue Apr 15 16:43:22 2025 +0530
arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators
[ Upstream commit 97b67cc102dc2cc8aa39a569c22a196e21af5a21 ]
Add device tree nodes for two power regulators on the J721E SK board.
vsys_5v0: A fixed regulator representing the 5V supply output from the
LM61460 and vdd_sd_dv: A GPIO-controlled TLV71033 regulator.
J721E-SK schematics: https://www.ti.com/lit/zip/sprr438
Fixes: 1bfda92a3a36 ("arm64: dts: ti: Add support for J721E SK")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250415111328.3847502-2-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Beleswar Padhi <b-padhi@ti.com>
Date: Tue Apr 30 18:45:12 2024 +0530
arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances
[ Upstream commit 021d3d5f0741e5393a7a110ac909fc746b1e0a4d ]
CAN instance 0 in the mcu domain is brought on the J721E-SK board
through header J1. Thus, add its respective transceiver 1 dt node to add
support for this CAN instance.
CAN instances 0, 5 and 9 in the main domain are brought on the J721E-SK
board through headers J5, J6 and J2 respectively. Thus, add their
respective transceivers 2, 3 and 4 dt nodes to add support for these CAN
instances.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240430131512.1327283-1-b-padhi@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Stable-dep-of: 97b67cc102dc ("arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vaishnav Achath <vaishnav.a@ti.com>
Date: Thu Feb 15 14:25:14 2024 +0530
arm64: dts: ti: k3-j721e-sk: Model CSI2RX connector mux
[ Upstream commit f87c88947396674586a42a163b72efa3999e3dee ]
J721E SK has the CSI2RX routed to a MIPI CSI connector and to 15-pin
RPi camera connector through an analog mux with GPIO control, model that
so that an overlay can control the mux state according to connected
cameras. Also provide labels to the I2C mux bus instances so that a
generic overlay can be used across multiple platforms.
J721E SK schematics: https://www.ti.com/lit/zip/sprr438
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-6-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Stable-dep-of: 97b67cc102dc ("arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kornel Dulęba <korneld@google.com>
Date: Thu Apr 17 11:47:54 2025 +0000
arm64: Support ARM64_VA_BITS=52 when setting ARCH_MMAP_RND_BITS_MAX
[ Upstream commit f101c56447717c595d803894ba0e215f56c6fba4 ]
When the 52-bit virtual addressing was introduced the select like
ARCH_MMAP_RND_BITS_MAX logic was never updated to account for it.
Because of that the rnd max bits knob is set to the default value of 18
when ARM64_VA_BITS=52.
Fix this by setting ARCH_MMAP_RND_BITS_MAX to the same value that would
be used if 48-bit addressing was used. Higher values can't used here
because 52-bit addressing is used only if the caller provides a hint to
mmap, with a fallback to 48-bit. The knob in question is an upper bound
for what the user can set in /proc/sys/vm/mmap_rnd_bits, which in turn
is used to determine how many random bits can be inserted into the base
address used for mmap allocations. Since 48-bit allocations are legal
with ARM64_VA_BITS=52, we need to make sure that the base address is
small enough to facilitate this.
Fixes: b6d00d47e81a ("arm64: mm: Introduce 52-bit Kernel VAs")
Signed-off-by: Kornel Dulęba <korneld@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250417114754.3238273-1-korneld@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aaron Kling <webgeek1234@gmail.com>
Date: Mon Apr 28 20:51:47 2025 -0500
arm64: tegra: Drop remaining serial clock-names and reset-names
[ Upstream commit 4cd763297c2203c6ba587d7d4a9105f96597b998 ]
The referenced commit only removed some of the names, missing all that
weren't in use at the time. The commit removes the rest.
Fixes: 71de0a054d0e ("arm64: tegra: Drop serial clock-names and reset-names")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250428-tegra-serial-fixes-v1-1-4f47c5d85bf6@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Joel Stanley <joel@jms.id.au>
Date: Thu May 15 16:00:42 2025 +0930
ARM: aspeed: Don't select SRAM
[ Upstream commit e4f59f873c3ffe2a0150e11115a83e2dfb671dbf ]
The ASPEED devices have SRAM, but don't require it for basic function
(or any function; there's no known users of the driver).
Fixes: 8c2ed9bcfbeb ("arm: Add Aspeed machine")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patch.msgid.link/20250115103942.421429-1-joel@jms.id.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Wed Apr 2 23:04:46 2025 +0200
ARM: dts: at91: at91sam9263: fix NAND chip selects
[ Upstream commit c72ede1c24be689733bcd2233a3a56f2478429c8 ]
NAND did not work on my USB-A9263. I discovered that the offending
commit converted the PIO bank for chip selects wrongly, so all A9263
boards need to be fixed.
Fixes: 1004a2977bdc ("ARM: dts: at91: Switch to the new NAND bindings")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250402210446.5972-2-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Fri Apr 4 13:27:43 2025 +0200
ARM: dts: at91: usb_a9263: fix GPIO for Dataflash chip select
[ Upstream commit 67ba341e57ab158423818ed33bfa1c40eb0e5e7e ]
Dataflash did not work on my board. After checking schematics and using
the proper GPIO, it works now. Also, make it active low to avoid:
flash@0 enforce active low on GPIO handle
Fixes: 2432d201468d ("ARM: at91: dt: usb-a9263: add dataflash support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250404112742.67416-2-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Date: Tue Mar 18 15:22:00 2025 +0200
ARM: dts: qcom: apq8064 merge hw splinlock into corresponding syscon device
[ Upstream commit 325c6a441ae1f8fcb1db9bb945b8bdbd3142141e ]
Follow up the expected way of describing the SFPB hwspinlock and merge
hwspinlock node into corresponding syscon node, fixing several dt-schema
warnings.
Fixes: 24a9baf933dc ("ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-7-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Date: Tue Mar 18 15:21:59 2025 +0200
ARM: dts: qcom: apq8064: add missing clocks to the timer node
[ Upstream commit 4b0eb149df58b6750cd8113e5ee5b3ac7cc51743 ]
In order to fix DT schema warning and describe hardware properly, add
missing sleep clock to the timer node.
Fixes: f335b8af4fd5 ("ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-6-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Povišer <povik+lin@cutebit.org>
Date: Sun May 18 20:50:46 2025 +1000
ASoC: apple: mca: Constrain channels according to TDM mask
[ Upstream commit e717c661e2d1a660e96c40b0fe9933e23a1d7747 ]
We don't (and can't) configure the hardware correctly if the number of
channels exceeds the weight of the TDM mask. Report that constraint in
startup of FE.
Fixes: 3df5d0d97289 ("ASoC: apple: mca: Start new platform driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250518-mca-fixes-v1-1-ee1015a695f6@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cezary Rojewski <cezary.rojewski@intel.com>
Date: Fri May 30 16:10:17 2025 +0200
ASoC: codecs: hda: Fix RPM usage count underflow
[ Upstream commit ff0045de4ee0288dec683690f66f2f369b7d3466 ]
RPM manipulation in hda_codec_probe_complete()'s error path is
superfluous and leads to RPM usage count underflow if the
build-controls operation fails.
hda_codec_probe_complete() is called in:
1) hda_codec_probe() for all non-HDMI codecs
2) in card->late_probe() for HDMI codecs
Error path for hda_codec_probe() takes care of bus' RPM already.
For 2) if late_probe() fails, ASoC performs card cleanup what
triggers hda_codec_remote() - same treatment is in 1).
Fixes: b5df2a7dca1c ("ASoC: codecs: Add HD-Audio codec driver")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cezary Rojewski <cezary.rojewski@intel.com>
Date: Fri May 30 16:10:18 2025 +0200
ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX
[ Upstream commit 9ad1f3cd0d60444c69948854c7e50d2a61b63755 ]
The procedure handling IPC timeouts and EXCEPTION_CAUGHT notification
shall cancel any D0IX work before proceeding with DSP recovery. If
SET_D0IX called from delayed_work is the failing IPC the procedure will
deadlock. Conditionally skip cancelling the work to fix that.
Fixes: 335c4cbd201d ("ASoC: Intel: avs: D0ix power state support")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cezary Rojewski <cezary.rojewski@intel.com>
Date: Fri May 30 16:10:23 2025 +0200
ASoC: Intel: avs: Verify content returned by parse_int_array()
[ Upstream commit 93e246b6769bdacb09cfff4ea0f00fe5ab4f0d7a ]
The first element of the returned array stores its length. If it is 0,
any manipulation beyond the element at index 0 ends with null-ptr-deref.
Fixes: 5a565ba23abe ("ASoC: Intel: avs: Probing and firmware tracing over debugfs")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <kees@kernel.org>
Date: Fri Apr 25 23:25:12 2025 -0700
ASoC: SOF: ipc4-pcm: Adjust pipeline_list->pipelines allocation type
[ Upstream commit 00a371adbbfb46db561db85a9d7b53b2363880a1 ]
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct snd_sof_pipeline **", but the returned type
will be "struct snd_sof_widget **". These are the same size allocation
(pointer size) but the types don't match. Adjust the allocation type to
match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Fixes: 9c04363d222b ("ASoC: SOF: Introduce struct snd_sof_pipeline")
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250426062511.work.859-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hector Martin <marcan@marcan.st>
Date: Sun Apr 6 09:15:08 2025 +1000
ASoC: tas2764: Enable main IRQs
[ Upstream commit dd50f0e38563f15819059c923bf142200453e003 ]
IRQ handling was added in commit dae191fb957f ("ASoC: tas2764: Add IRQ
handling") however that same commit masks all interrupts coming from
the chip. Unmask the "main" interrupts so that we can see and
deal with a number of errors including clock, voltage, and current.
Fixes: dae191fb957f ("ASoC: tas2764: Add IRQ handling")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250406-apple-codec-changes-v5-4-50a00ec850a3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yuuki NAGAO <wf.yn386@gmail.com>
Date: Sat May 31 23:13:41 2025 +0900
ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init
[ Upstream commit bae071aa7bcd034054cec91666c80f812adeccd9 ]
The removed dai_link->platform component cause a fail which
is exposed at runtime. (ex: when a sound tool is used)
This patch re-adds the dai_link->platform component to have
a full card registered.
Before this patch:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: HDMI [HDMI], device 0: HDMI snd-soc-dummy-dai-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
$ speaker-test -D plughw:1,0 -t sine
speaker-test 1.2.8
Playback device is plughw:1,0
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Playback open error: -22,Invalid argument
After this patch which restores the platform component:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDMI], device 0: HDMI snd-soc-dummy-dai-0 [HDMI snd-soc-dummy-dai-0]
Subdevices: 0/1
Subdevice #0: subdevice #0
-> Resolve the playback error.
Fixes: 3b0db249cf8f ("ASoC: ti: remove unnecessary dai_link->platform")
Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>
Link: https://patch.msgid.link/20250531141341.81164-1-wf.yn386@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Casey Connolly <casey.connolly@linaro.org>
Date: Tue Mar 18 20:50:27 2025 +0000
ath10k: snoc: fix unbalanced IRQ enable in crash recovery
[ Upstream commit 1650d32b92b01db03a1a95d69ee74fcbc34d4b00 ]
In ath10k_snoc_hif_stop() we skip disabling the IRQs in the crash
recovery flow, but we still unconditionally call enable again in
ath10k_snoc_hif_start().
We can't check the ATH10K_FLAG_CRASH_FLUSH bit since it is cleared
before hif_start() is called, so instead check the
ATH10K_SNOC_FLAG_RECOVERY flag and skip enabling the IRQs during crash
recovery.
This fixes unbalanced IRQ enable splats that happen after recovering from
a crash.
Fixes: 0e622f67e041 ("ath10k: add support for WCN3990 firmware crash recovery")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20250318205043.1043148-1-caleb.connolly@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Henry Martin <bsdhenrymartin@gmail.com>
Date: Tue Apr 1 17:16:47 2025 +0800
backlight: pm8941: Add NULL check in wled_configure()
[ Upstream commit e12d3e1624a02706cdd3628bbf5668827214fa33 ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
wled_configure() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: f86b77583d88 ("backlight: pm8941: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250401091647.22784-1-bsdhenrymartin@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Matthew Wilcox (Oracle) <willy@infradead.org>
Date: Thu Jun 12 15:41:25 2025 +0100
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
[ Upstream commit f826ec7966a63d48e16e0868af4e038bf9a1a3ae ]
It is possible for physically contiguous folios to have discontiguous
struct pages if SPARSEMEM is enabled and SPARSEMEM_VMEMMAP is not.
This is correctly handled by folio_page_idx(), so remove this open-coded
implementation.
Fixes: 640d1930bef4 (block: Add bio_for_each_folio_all())
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20250612144126.2849931-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Matthew Wilcox (Oracle) <willy@infradead.org>
Date: Thu Jun 12 15:42:53 2025 +0100
block: Fix bvec_set_folio() for very large folios
[ Upstream commit 5e223e06ee7c6d8f630041a0645ac90e39a42cc6 ]
Similarly to 26064d3e2b4d ("block: fix adding folio to bio"), if
we attempt to add a folio that is larger than 4GB, we'll silently
truncate the offset and len. Widen the parameters to size_t, assert
that the length is less than 4GB and set the first page that contains
the interesting data rather than the first page of the folio.
Fixes: 26db5ee15851 (block: add a bvec_set_folio helper)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20250612144255.2850278-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Thu Jun 5 11:14:25 2025 -0400
Bluetooth: Fix NULL pointer deference on eir_get_service_data
[ Upstream commit 20a2aa01f5aeb6daad9aeaa7c33dd512c58d81eb ]
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA.
Fixes: 8f9ae5b3ae80 ("Bluetooth: eir: Add helpers for managing service data")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pauli Virtanen <pav@iki.fi>
Date: Sat May 31 18:24:58 2025 +0300
Bluetooth: hci_core: fix list_for_each_entry_rcu usage
[ Upstream commit 308a3a8ce8ea41b26c46169f3263e50f5997c28e ]
Releasing + re-acquiring RCU lock inside list_for_each_entry_rcu() loop
body is not correct.
Fix by taking the update-side hdev->lock instead.
Fixes: c7eaf80bfb0c ("Bluetooth: Fix hci_link_tx_to RCU lock usage")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Date: Tue May 27 09:47:37 2025 +0200
Bluetooth: hci_qca: move the SoC type check to the right place
commit 0fb410c914eb03c7e9d821e26d03bac0a239e5db upstream.
Commit 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL
returned by gpiod_get_optional()") accidentally changed the prevous
behavior where power control would be disabled without the BT_EN GPIO
only on QCA_WCN6750 and QCA_WCN6855 while also getting the error check
wrong. We should treat every IS_ERR() return value from
devm_gpiod_get_optional() as a reason to bail-out while we should only
set power_ctrl_enabled to false on the two models mentioned above. While
at it: use dev_err_probe() to save a LOC.
Cc: stable@vger.kernel.org
Fixes: 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Hsin-chen Chuang <chharry@chromium.org>
Reviewed-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Thu Jun 5 11:15:16 2025 -0400
Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance
[ Upstream commit 5725bc608252050ed8a4d47d59225b7dd73474c8 ]
When using and existing adv_info instance for broadcast source it
needs to be updated to periodic first before it can be reused, also in
case the existing instance already have data hci_set_adv_instance_data
cannot be used directly since it would overwrite the existing data so
this reappend the original data after the Broadcast ID, if one was
generated.
Example:
bluetoothctl># Add PBP to EA so it can be later referenced as the BIS ID
bluetoothctl> advertise.service 0x1856 0x00 0x00
bluetoothctl> advertise on
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 13
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x09
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
...
bluetoothctl># Attempt to acquire Broadcast Source transport
bluetoothctl>transport.acquire /org/bluez/hci0/pac_bcast0/fd0
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 255
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x0e
Service Data: Broadcast Audio Announcement (0x1852)
Broadcast ID: 11371620 (0xad8464)
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Link: https://github.com/bluez/bluez/issues/1117
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Wed May 28 14:53:11 2025 -0400
Bluetooth: L2CAP: Fix not responding with L2CAP_CR_LE_ENCRYPTION
[ Upstream commit 03dba9cea72f977e873e4e60e220fa596959dd8f ]
Depending on the security set the response to L2CAP_LE_CONN_REQ shall be
just L2CAP_CR_LE_ENCRYPTION if only encryption when BT_SECURITY_MEDIUM
is selected since that means security mode 2 which doesn't require
authentication which is something that is covered in the qualification
test L2CAP/LE/CFC/BV-25-C.
Link: https://github.com/bluez/bluez/issues/1270
Fixes: 27e2d4c8d28b ("Bluetooth: Add basic LE L2CAP connect request receiving support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Wed Jun 11 16:36:27 2025 -0400
Bluetooth: MGMT: Fix sparse errors
[ Upstream commit 7dd38ba4acbea9875b4ee061e20a26413e39d9f4 ]
This fixes the following errors:
net/bluetooth/mgmt.c:5400:59: sparse: sparse: incorrect type in argument 3
(different base types) @@ expected unsigned short [usertype] handle @@
got restricted __le16 [usertype] monitor_handle @@
net/bluetooth/mgmt.c:5400:59: sparse: expected unsigned short [usertype] handle
net/bluetooth/mgmt.c:5400:59: sparse: got restricted __le16 [usertype] monitor_handle
Fixes: e6ed54e86aae ("Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506060347.ux2O1p7L-lkp@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Tue Jun 3 16:12:39 2025 -0400
Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
[ Upstream commit e6ed54e86aae9e4f7286ce8d5c73780f91b48d1c ]
This reworks MGMT_OP_REMOVE_ADV_MONITOR to not use mgmt_pending_add to
avoid crashes like bellow:
==================================================================
BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406
Read of size 8 at addr ffff88801c53f318 by task kworker/u5:5/5341
CPU: 0 UID: 0 PID: 5341 Comm: kworker/u5:5 Not tainted 6.15.0-syzkaller-10402-g4cb6c8af8591 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406
hci_cmd_sync_work+0x261/0x3a0 net/bluetooth/hci_sync.c:334
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x711/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 5987:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
mgmt_pending_new+0x65/0x240 net/bluetooth/mgmt_util.c:252
mgmt_pending_add+0x34/0x120 net/bluetooth/mgmt_util.c:279
remove_adv_monitor+0x103/0x1b0 net/bluetooth/mgmt.c:5454
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:727
sock_write_iter+0x258/0x330 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x548/0xa90 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5989:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2380 [inline]
slab_free mm/slub.c:4642 [inline]
kfree+0x18e/0x440 mm/slub.c:4841
mgmt_pending_foreach+0xc9/0x120 net/bluetooth/mgmt_util.c:242
mgmt_index_removed+0x10d/0x2f0 net/bluetooth/mgmt.c:9366
hci_sock_bind+0xbe9/0x1000 net/bluetooth/hci_sock.c:1314
__sys_bind_socket net/socket.c:1810 [inline]
__sys_bind+0x2c3/0x3e0 net/socket.c:1841
__do_sys_bind net/socket.c:1846 [inline]
__se_sys_bind net/socket.c:1844 [inline]
__x64_sys_bind+0x7a/0x90 net/socket.c:1844
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 66bd095ab5d4 ("Bluetooth: advmon offload MSFT remove monitor")
Closes: https://syzkaller.appspot.com/bug?extid=feb0dc579bbe30a13190
Reported-by: syzbot+feb0dc579bbe30a13190@syzkaller.appspotmail.com
Tested-by: syzbot+feb0dc579bbe30a13190@syzkaller.appspotmail.com
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Antipov <dmantipov@yandex.ru>
Date: Tue May 20 11:42:30 2025 +0300
Bluetooth: MGMT: iterate over mesh commands in mgmt_mesh_foreach()
[ Upstream commit 3bb88524b7d030160bb3c9b35f928b2778092111 ]
In 'mgmt_mesh_foreach()', iterate over mesh commands
rather than generic mgmt ones. Compile tested only.
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Tue May 20 15:42:21 2025 -0400
Bluetooth: MGMT: Protect mgmt_pending list with its own lock
[ Upstream commit 6fe26f694c824b8a4dbf50c635bee1302e3f099c ]
This uses a mutex to protect from concurrent access of mgmt_pending
list which can cause crashes like:
==================================================================
BUG: KASAN: slab-use-after-free in hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91
Read of size 2 at addr ffff0000c48885b2 by task syz.4.334/7318
CPU: 0 UID: 0 PID: 7318 Comm: syz.4.334 Not tainted 6.15.0-rc7-syzkaller-g187899f4124a #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C)
__dump_stack+0x30/0x40 lib/dump_stack.c:94
dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120
print_address_description+0xa8/0x254 mm/kasan/report.c:408
print_report+0x68/0x84 mm/kasan/report.c:521
kasan_report+0xb0/0x110 mm/kasan/report.c:634
__asan_report_load2_noabort+0x20/0x2c mm/kasan/report_generic.c:379
hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91
mgmt_pending_find+0x7c/0x140 net/bluetooth/mgmt_util.c:223
pending_find net/bluetooth/mgmt.c:947 [inline]
remove_adv_monitor+0x44/0x1a4 net/bluetooth/mgmt.c:5445
hci_mgmt_cmd+0x780/0xc00 net/bluetooth/hci_sock.c:1712
hci_sock_sendmsg+0x544/0xbb0 net/bluetooth/hci_sock.c:1832
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
sock_write_iter+0x25c/0x378 net/socket.c:1131
new_sync_write fs/read_write.c:591 [inline]
vfs_write+0x62c/0x97c fs/read_write.c:684
ksys_write+0x120/0x210 fs/read_write.c:736
__do_sys_write fs/read_write.c:747 [inline]
__se_sys_write fs/read_write.c:744 [inline]
__arm64_sys_write+0x7c/0x90 fs/read_write.c:744
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Allocated by task 7037:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_alloc_info+0x44/0x54 mm/kasan/generic.c:562
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x9c/0xb4 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4327 [inline]
__kmalloc_noprof+0x2fc/0x4c8 mm/slub.c:4339
kmalloc_noprof include/linux/slab.h:909 [inline]
sk_prot_alloc+0xc4/0x1f0 net/core/sock.c:2198
sk_alloc+0x44/0x3ac net/core/sock.c:2254
bt_sock_alloc+0x4c/0x300 net/bluetooth/af_bluetooth.c:148
hci_sock_create+0xa8/0x194 net/bluetooth/hci_sock.c:2202
bt_sock_create+0x14c/0x24c net/bluetooth/af_bluetooth.c:132
__sock_create+0x43c/0x91c net/socket.c:1541
sock_create net/socket.c:1599 [inline]
__sys_socket_create net/socket.c:1636 [inline]
__sys_socket+0xd4/0x1c0 net/socket.c:1683
__do_sys_socket net/socket.c:1697 [inline]
__se_sys_socket net/socket.c:1695 [inline]
__arm64_sys_socket+0x7c/0x94 net/socket.c:1695
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Freed by task 6607:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x68/0x88 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2380 [inline]
slab_free mm/slub.c:4642 [inline]
kfree+0x17c/0x474 mm/slub.c:4841
sk_prot_free net/core/sock.c:2237 [inline]
__sk_destruct+0x4f4/0x760 net/core/sock.c:2332
sk_destruct net/core/sock.c:2360 [inline]
__sk_free+0x320/0x430 net/core/sock.c:2371
sk_free+0x60/0xc8 net/core/sock.c:2382
sock_put include/net/sock.h:1944 [inline]
mgmt_pending_free+0x88/0x118 net/bluetooth/mgmt_util.c:290
mgmt_pending_remove+0xec/0x104 net/bluetooth/mgmt_util.c:298
mgmt_set_powered_complete+0x418/0x5cc net/bluetooth/mgmt.c:1355
hci_cmd_sync_work+0x204/0x33c net/bluetooth/hci_sync.c:334
process_one_work+0x7e8/0x156c kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x958/0xed8 kernel/workqueue.c:3400
kthread+0x5fc/0x75c kernel/kthread.c:464
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:847
Fixes: a380b6cff1a2 ("Bluetooth: Add generic mgmt helper API")
Closes: https://syzkaller.appspot.com/bug?extid=0a7039d5d9986ff4ecec
Closes: https://syzkaller.appspot.com/bug?extid=cc0cc52e7f43dc9e6df1
Reported-by: syzbot+0a7039d5d9986ff4ecec@syzkaller.appspotmail.com
Tested-by: syzbot+0a7039d5d9986ff4ecec@syzkaller.appspotmail.com
Tested-by: syzbot+cc0cc52e7f43dc9e6df1@syzkaller.appspotmail.com
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dr. David Alan Gilbert <linux@treblig.org>
Date: Mon Jan 27 21:37:15 2025 +0000
Bluetooth: MGMT: Remove unused mgmt_pending_find_data
[ Upstream commit 276af34d82f13bda0b2a4d9786c90b8bbf1cd064 ]
mgmt_pending_find_data() last use was removed in 2021 by
commit 5a7501374664 ("Bluetooth: hci_sync: Convert MGMT_OP_GET_CLOCK_INFO")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 6fe26f694c82 ("Bluetooth: MGMT: Protect mgmt_pending list with its own lock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hangbin Liu <liuhangbin@gmail.com>
Date: Thu Apr 24 04:22:38 2025 +0000
bonding: assign random address if device address is same as bond
[ Upstream commit 5c3bf6cba7911f470afd748606be5c03a9512fcc ]
This change addresses a MAC address conflict issue in failover scenarios,
similar to the problem described in commit a951bc1e6ba5 ("bonding: correct
the MAC address for 'follow' fail_over_mac policy").
In fail_over_mac=follow mode, the bonding driver expects the formerly active
slave to swap MAC addresses with the newly active slave during failover.
However, under certain conditions, two slaves may end up with the same MAC
address, which breaks this policy:
1) ip link set eth0 master bond0
-> bond0 adopts eth0's MAC address (MAC0).
2) ip link set eth1 master bond0
-> eth1 is added as a backup with its own MAC (MAC1).
3) ip link set eth0 nomaster
-> eth0 is released and restores its MAC (MAC0).
-> eth1 becomes the active slave, and bond0 assigns MAC0 to eth1.
4) ip link set eth0 master bond0
-> eth0 is re-added to bond0, now both eth0 and eth1 have MAC0.
This results in a MAC address conflict and violates the expected behavior
of the failover policy.
To fix this, we assign a random MAC address to any newly added slave if
its current MAC address matches that of the bond. The original (permanent)
MAC address is saved and will be restored when the device is released
from the bond.
This ensures that each slave has a unique MAC address during failover
transitions, preserving the integrity of the fail_over_mac=follow policy.
Fixes: 3915c1e8634a ("bonding: Add "follow" option to fail_over_mac")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiayuan Chen <jiayuan.chen@linux.dev>
Date: Fri May 16 22:17:12 2025 +0800
bpf, sockmap: Avoid using sk_socket after free when sending
[ Upstream commit 8259eb0e06d8f64c700f5fbdb28a5c18e10de291 ]
The sk->sk_socket is not locked or referenced in backlog thread, and
during the call to skb_send_sock(), there is a race condition with
the release of sk_socket. All types of sockets(tcp/udp/unix/vsock)
will be affected.
Race conditions:
'''
CPU0 CPU1
backlog::skb_send_sock
sendmsg_unlocked
sock_sendmsg
sock_sendmsg_nosec
close(fd):
...
ops->release() -> sock_map_close()
sk_socket->ops = NULL
free(socket)
sock->ops->sendmsg
^
panic here
'''
The ref of psock become 0 after sock_map_close() executed.
'''
void sock_map_close()
{
...
if (likely(psock)) {
...
// !! here we remove psock and the ref of psock become 0
sock_map_remove_links(sk, psock)
psock = sk_psock_get(sk);
if (unlikely(!psock))
goto no_psock; <=== Control jumps here via goto
...
cancel_delayed_work_sync(&psock->work); <=== not executed
sk_psock_put(sk, psock);
...
}
'''
Based on the fact that we already wait for the workqueue to finish in
sock_map_close() if psock is held, we simply increase the psock
reference count to avoid race conditions.
With this patch, if the backlog thread is running, sock_map_close() will
wait for the backlog thread to complete and cancel all pending work.
If no backlog running, any pending work that hasn't started by then will
fail when invoked by sk_psock_get(), as the psock reference count have
been zeroed, and sk_psock_drop() will cancel all jobs via
cancel_delayed_work_sync().
In summary, we require synchronization to coordinate the backlog thread
and close() thread.
The panic I catched:
'''
Workqueue: events sk_psock_backlog
RIP: 0010:sock_sendmsg+0x21d/0x440
RAX: 0000000000000000 RBX: ffffc9000521fad8 RCX: 0000000000000001
...
Call Trace:
<TASK>
? die_addr+0x40/0xa0
? exc_general_protection+0x14c/0x230
? asm_exc_general_protection+0x26/0x30
? sock_sendmsg+0x21d/0x440
? sock_sendmsg+0x3e0/0x440
? __pfx_sock_sendmsg+0x10/0x10
__skb_send_sock+0x543/0xb70
sk_psock_backlog+0x247/0xb80
...
'''
Fixes: 4b4647add7d3 ("sock_map: avoid race between sock_map_close and sk_psock_put")
Reported-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250516141713.291150-1-jiayuan.chen@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiayuan Chen <jiayuan.chen@linux.dev>
Date: Mon Apr 7 22:21:21 2025 +0800
bpf, sockmap: fix duplicated data transmission
[ Upstream commit 3b4f14b794287be137ea2c6158765d1ea1e018a4 ]
In the !ingress path under sk_psock_handle_skb(), when sending data to the
remote under snd_buf limitations, partial skb data might be transmitted.
Although we preserved the partial transmission state (offset/length), the
state wasn't properly consumed during retries. This caused the retry path
to resend the entire skb data instead of continuing from the previous
offset, resulting in data overlap at the receiver side.
Fixes: 405df89dd52c ("bpf, sockmap: Improved check for empty queue")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20250407142234.47591-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiayuan Chen <jiayuan.chen@linux.dev>
Date: Mon Apr 7 22:21:22 2025 +0800
bpf, sockmap: Fix panic when calling skb_linearize
[ Upstream commit 5ca2e29f6834c64c0e5a9ccf1278c21fb49b827e ]
The panic can be reproduced by executing the command:
./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --rx-strp 100000
Then a kernel panic was captured:
'''
[ 657.460555] kernel BUG at net/core/skbuff.c:2178!
[ 657.462680] Tainted: [W]=WARN
[ 657.463287] Workqueue: events sk_psock_backlog
...
[ 657.469610] <TASK>
[ 657.469738] ? die+0x36/0x90
[ 657.469916] ? do_trap+0x1d0/0x270
[ 657.470118] ? pskb_expand_head+0x612/0xf40
[ 657.470376] ? pskb_expand_head+0x612/0xf40
[ 657.470620] ? do_error_trap+0xa3/0x170
[ 657.470846] ? pskb_expand_head+0x612/0xf40
[ 657.471092] ? handle_invalid_op+0x2c/0x40
[ 657.471335] ? pskb_expand_head+0x612/0xf40
[ 657.471579] ? exc_invalid_op+0x2d/0x40
[ 657.471805] ? asm_exc_invalid_op+0x1a/0x20
[ 657.472052] ? pskb_expand_head+0xd1/0xf40
[ 657.472292] ? pskb_expand_head+0x612/0xf40
[ 657.472540] ? lock_acquire+0x18f/0x4e0
[ 657.472766] ? find_held_lock+0x2d/0x110
[ 657.472999] ? __pfx_pskb_expand_head+0x10/0x10
[ 657.473263] ? __kmalloc_cache_noprof+0x5b/0x470
[ 657.473537] ? __pfx___lock_release.isra.0+0x10/0x10
[ 657.473826] __pskb_pull_tail+0xfd/0x1d20
[ 657.474062] ? __kasan_slab_alloc+0x4e/0x90
[ 657.474707] sk_psock_skb_ingress_enqueue+0x3bf/0x510
[ 657.475392] ? __kasan_kmalloc+0xaa/0xb0
[ 657.476010] sk_psock_backlog+0x5cf/0xd70
[ 657.476637] process_one_work+0x858/0x1a20
'''
The panic originates from the assertion BUG_ON(skb_shared(skb)) in
skb_linearize(). A previous commit(see Fixes tag) introduced skb_get()
to avoid race conditions between skb operations in the backlog and skb
release in the recvmsg path. However, this caused the panic to always
occur when skb_linearize is executed.
The "--rx-strp 100000" parameter forces the RX path to use the strparser
module which aggregates data until it reaches 100KB before calling sockmap
logic. The 100KB payload exceeds MAX_MSG_FRAGS, triggering skb_linearize.
To fix this issue, just move skb_get into sk_psock_skb_ingress_enqueue.
'''
sk_psock_backlog:
sk_psock_handle_skb
skb_get(skb) <== we move it into 'sk_psock_skb_ingress_enqueue'
sk_psock_skb_ingress____________
↓
|
| → sk_psock_skb_ingress_self
| sk_psock_skb_ingress_enqueue
sk_psock_verdict_apply_________________↑ skb_linearize
'''
Note that for verdict_apply path, the skb_get operation is unnecessary so
we add 'take_ref' param to control it's behavior.
Fixes: a454d84ee20b ("bpf, sockmap: Fix skb refcnt race after locking changes")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20250407142234.47591-4-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Mon Apr 28 17:44:02 2025 +0200
bpf: Allow XDP dev-bound programs to perform XDP_REDIRECT into maps
[ Upstream commit 714070c4cb7a10ff57450a618a936775f3036245 ]
In the current implementation if the program is dev-bound to a specific
device, it will not be possible to perform XDP_REDIRECT into a DEVMAP
or CPUMAP even if the program is running in the driver NAPI context and
it is not attached to any map entry. This seems in contrast with the
explanation available in bpf_prog_map_compatible routine.
Fix the issue introducing __bpf_prog_map_compatible utility routine in
order to avoid bpf_prog_is_dev_bound() check running bpf_check_tail_call()
at program load time (bpf_prog_select_runtime()).
Continue forbidding to attach a dev-bound program to XDP maps
(BPF_MAP_TYPE_PROG_ARRAY, BPF_MAP_TYPE_DEVMAP and BPF_MAP_TYPE_CPUMAP).
Fixes: 3d76a4d3d4e59 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: KaFai Wan <mannkafai@gmail.com>
Date: Mon May 26 21:33:58 2025 +0800
bpf: Avoid __bpf_prog_ret0_warn when jit fails
[ Upstream commit 86bc9c742426a16b52a10ef61f5b721aecca2344 ]
syzkaller reported an issue:
WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Modules linked in:
CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39
RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105
...
When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable.
This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set
and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog,
but jit failed due to FAULT_INJECTION. As a result, incorrectly
treats the program as valid, when the program runs it calls
`__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1).
Reported-by: syzbot+0903f6d7f285e41cdf10@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/6816e34e.a70a0220.254cdc.002c.GAE@google.com
Fixes: fa9dd599b4da ("bpf: get rid of pure_initcall dependency to enable jits")
Signed-off-by: KaFai Wan <mannkafai@gmail.com>
Link: https://lore.kernel.org/r/20250526133358.2594176-1-mannkafai@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiayuan Chen <jiayuan.chen@linux.dev>
Date: Wed Feb 19 13:20:14 2025 +0800
bpf: fix ktls panic with sockmap
[ Upstream commit 54a3ecaeeeae8176da8badbd7d72af1017032c39 ]
[ 2172.936997] ------------[ cut here ]------------
[ 2172.936999] kernel BUG at lib/iov_iter.c:629!
......
[ 2172.944996] PKRU: 55555554
[ 2172.945155] Call Trace:
[ 2172.945299] <TASK>
[ 2172.945428] ? die+0x36/0x90
[ 2172.945601] ? do_trap+0xdd/0x100
[ 2172.945795] ? iov_iter_revert+0x178/0x180
[ 2172.946031] ? iov_iter_revert+0x178/0x180
[ 2172.946267] ? do_error_trap+0x7d/0x110
[ 2172.946499] ? iov_iter_revert+0x178/0x180
[ 2172.946736] ? exc_invalid_op+0x50/0x70
[ 2172.946961] ? iov_iter_revert+0x178/0x180
[ 2172.947197] ? asm_exc_invalid_op+0x1a/0x20
[ 2172.947446] ? iov_iter_revert+0x178/0x180
[ 2172.947683] ? iov_iter_revert+0x5c/0x180
[ 2172.947913] tls_sw_sendmsg_locked.isra.0+0x794/0x840
[ 2172.948206] tls_sw_sendmsg+0x52/0x80
[ 2172.948420] ? inet_sendmsg+0x1f/0x70
[ 2172.948634] __sys_sendto+0x1cd/0x200
[ 2172.948848] ? find_held_lock+0x2b/0x80
[ 2172.949072] ? syscall_trace_enter+0x140/0x270
[ 2172.949330] ? __lock_release.isra.0+0x5e/0x170
[ 2172.949595] ? find_held_lock+0x2b/0x80
[ 2172.949817] ? syscall_trace_enter+0x140/0x270
[ 2172.950211] ? lockdep_hardirqs_on_prepare+0xda/0x190
[ 2172.950632] ? ktime_get_coarse_real_ts64+0xc2/0xd0
[ 2172.951036] __x64_sys_sendto+0x24/0x30
[ 2172.951382] do_syscall_64+0x90/0x170
......
After calling bpf_exec_tx_verdict(), the size of msg_pl->sg may increase,
e.g., when the BPF program executes bpf_msg_push_data().
If the BPF program sets cork_bytes and sg.size is smaller than cork_bytes,
it will return -ENOSPC and attempt to roll back to the non-zero copy
logic. However, during rollback, msg->msg_iter is reset, but since
msg_pl->sg.size has been increased, subsequent executions will exceed the
actual size of msg_iter.
'''
iov_iter_revert(&msg->msg_iter, msg_pl->sg.size - orig_size);
'''
The changes in this commit are based on the following considerations:
1. When cork_bytes is set, rolling back to non-zero copy logic is
pointless and can directly go to zero-copy logic.
2. We can not calculate the correct number of bytes to revert msg_iter.
Assume the original data is "abcdefgh" (8 bytes), and after 3 pushes
by the BPF program, it becomes 11-byte data: "abc?de?fgh?".
Then, we set cork_bytes to 6, which means the first 6 bytes have been
processed, and the remaining 5 bytes "?fgh?" will be cached until the
length meets the cork_bytes requirement.
However, some data in "?fgh?" is not within 'sg->msg_iter'
(but in msg_pl instead), especially the data "?" we pushed.
So it doesn't seem as simple as just reverting through an offset of
msg_iter.
3. For non-TLS sockets in tcp_bpf_sendmsg, when a "cork" situation occurs,
the user-space send() doesn't return an error, and the returned length is
the same as the input length parameter, even if some data is cached.
Additionally, I saw that the current non-zero-copy logic for handling
corking is written as:
'''
line 1177
else if (ret != -EAGAIN) {
if (ret == -ENOSPC)
ret = 0;
goto send_end;
'''
So it's ok to just return 'copied' without error when a "cork" situation
occurs.
Fixes: fcb14cb1bdac ("new iov_iter flavour - ITER_UBUF")
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250219052015.274405-2-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anton Protopopov <a.s.protopopov@gmail.com>
Date: Fri May 2 19:30:31 2025 +0000
bpf: Fix uninitialized values in BPF_{CORE,PROBE}_READ
[ Upstream commit 41d4ce6df3f4945341ec509a840cc002a413b6cc ]
With the latest LLVM bpf selftests build will fail with
the following error message:
progs/profiler.inc.h:710:31: error: default initialization of an object of type 'typeof ((parent_task)->real_cred->uid.val)' (aka 'const unsigned int') leaves the object uninitialized and is incompatible with C++ [-Werror,-Wdefault-const-init-unsafe]
710 | proc_exec_data->parent_uid = BPF_CORE_READ(parent_task, real_cred, uid.val);
| ^
tools/testing/selftests/bpf/tools/include/bpf/bpf_core_read.h:520:35: note: expanded from macro 'BPF_CORE_READ'
520 | ___type((src), a, ##__VA_ARGS__) __r; \
| ^
This happens because BPF_CORE_READ (and other macro) declare the
variable __r using the ___type macro which can inherit const modifier
from intermediate types.
Fix this by using __typeof_unqual__, when supported. (And when it
is not supported, the problem shouldn't appear, as older compilers
haven't complained.)
Fixes: 792001f4f7aa ("libbpf: Add user-space variants of BPF_CORE_READ() family of macros")
Fixes: a4b09a9ef945 ("libbpf: Add non-CO-RE variants of BPF_CORE_READ() macro family")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250502193031.3522715-1-a.s.protopopov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tao Chen <chen.dylane@linux.dev>
Date: Tue May 13 12:27:47 2025 +0800
bpf: Fix WARN() in get_bpf_raw_tp_regs
[ Upstream commit 3880cdbed1c4607e378f58fa924c5d6df900d1d3 ]
syzkaller reported an issue:
WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
Modules linked in:
CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c
RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005
RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004
R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900
FS: 0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline]
bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
__bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline]
bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405
__bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47
__traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47
__do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
__mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35
__mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline]
mmap_read_trylock include/linux/mmap_lock.h:204 [inline]
stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157
__bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483
____bpf_get_stack kernel/bpf/stackmap.c:499 [inline]
bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline]
bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
Tracepoint like trace_mmap_lock_acquire_returned may cause nested call
as the corner case show above, which will be resolved with more general
method in the future. As a result, WARN_ON_ONCE will be triggered. As
Alexei suggested, remove the WARN_ON_ONCE first.
Fixes: 9594dc3c7e71 ("bpf: fix nested bpf tracepoints with per-cpu data")
Reported-by: syzbot+45b0c89a0fc7ae8dbadc@syzkaller.appspotmail.com
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250513042747.757042-1-chen.dylane@linux.dev
Closes: https://lore.kernel.org/bpf/8bc2554d-1052-4922-8832-e0078a033e1d@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qu Wenruo <wqu@suse.com>
Date: Mon May 5 18:56:18 2025 +0930
btrfs: scrub: fix a wrong error type when metadata bytenr mismatches
[ Upstream commit f2c19541e421b3235efc515dad88b581f00592ae ]
When the bytenr doesn't match for a metadata tree block, we will report
it as an csum error, which is incorrect and should be reported as a
metadata error instead.
Fixes: a3ddbaebc7c9 ("btrfs: scrub: introduce a helper to verify one metadata block")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qu Wenruo <wqu@suse.com>
Date: Thu May 1 08:37:54 2025 +0930
btrfs: scrub: update device stats when an error is detected
[ Upstream commit ec1f3a207cdf314eae4d4ae145f1ffdb829f0652 ]
[BUG]
Since the migration to the new scrub_stripe interface, scrub no longer
updates the device stats when hitting an error, no matter if it's a read
or checksum mismatch error. E.g:
BTRFS info (device dm-2): scrub: started on devid 1
BTRFS error (device dm-2): unable to fixup (regular) error at logical 13631488 on dev /dev/mapper/test-scratch1 physical 13631488
BTRFS warning (device dm-2): checksum error at logical 13631488 on dev /dev/mapper/test-scratch1, physical 13631488, root 5, inode 257, offset 0, length 4096, links 1 (path: file)
BTRFS error (device dm-2): unable to fixup (regular) error at logical 13631488 on dev /dev/mapper/test-scratch1 physical 13631488
BTRFS warning (device dm-2): checksum error at logical 13631488 on dev /dev/mapper/test-scratch1, physical 13631488, root 5, inode 257, offset 0, length 4096, links 1 (path: file)
BTRFS info (device dm-2): scrub: finished on devid 1 with status: 0
Note there is no line showing the device stats error update.
[CAUSE]
In the migration to the new scrub_stripe interface, we no longer call
btrfs_dev_stat_inc_and_print().
[FIX]
- Introduce a new bitmap for metadata generation errors
* A new bitmap
@meta_gen_error_bitmap is introduced to record which blocks have
metadata generation mismatch errors.
* A new counter for that bitmap
@init_nr_meta_gen_errors, is also introduced to store the number of
generation mismatch errors that are found during the initial read.
This is for the error reporting at scrub_stripe_report_errors().
* New dedicated error message for unrepaired generation mismatches
* Update @meta_gen_error_bitmap if a transid mismatch is hit
- Add btrfs_dev_stat_inc_and_print() calls to the following call sites
* scrub_stripe_report_errors()
* scrub_write_endio()
This is only for the write errors.
This means there is a minor behavior change:
- The timing of device stats error message
Since we concentrate the error messages at
scrub_stripe_report_errors(), the device stats error messages will all
show up in one go, after the detailed scrub error messages:
BTRFS error (device dm-2): unable to fixup (regular) error at logical 13631488 on dev /dev/mapper/test-scratch1 physical 13631488
BTRFS warning (device dm-2): checksum error at logical 13631488 on dev /dev/mapper/test-scratch1, physical 13631488, root 5, inode 257, offset 0, length 4096, links 1 (path: file)
BTRFS error (device dm-2): unable to fixup (regular) error at logical 13631488 on dev /dev/mapper/test-scratch1 physical 13631488
BTRFS warning (device dm-2): checksum error at logical 13631488 on dev /dev/mapper/test-scratch1, physical 13631488, root 5, inode 257, offset 0, length 4096, links 1 (path: file)
BTRFS error (device dm-2): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
BTRFS error (device dm-2): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
Fixes: e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ioana Ciornei <ioana.ciornei@nxp.com>
Date: Tue Apr 8 13:58:09 2025 +0300
bus: fsl-mc: fix double-free on mc_dev
[ Upstream commit d694bf8a9acdbd061596f3e7549bc8cb70750a60 ]
The blamed commit tried to simplify how the deallocations are done but,
in the process, introduced a double-free on the mc_dev variable.
In case the MC device is a DPRC, a new mc_bus is allocated and the
mc_dev variable is just a reference to one of its fields. In this
circumstance, on the error path only the mc_bus should be freed.
This commit introduces back the following checkpatch warning which is a
false-positive.
WARNING: kfree(NULL) is safe and this check is probably not required
+ if (mc_bus)
+ kfree(mc_bus);
Fixes: a042fbed0290 ("staging: fsl-mc: simplify couple of deallocations")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250408105814.2837951-2-ioana.ciornei@nxp.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuniyuki Iwashima <kuniyu@google.com>
Date: Thu May 22 15:18:56 2025 -0700
calipso: Don't call calipso functions for AF_INET sk.
[ Upstream commit 6e9f2df1c550ead7cecb3e450af1105735020c92 ]
syzkaller reported a null-ptr-deref in txopt_get(). [0]
The offset 0x70 was of struct ipv6_txoptions in struct ipv6_pinfo,
so struct ipv6_pinfo was NULL there.
However, this never happens for IPv6 sockets as inet_sk(sk)->pinet6
is always set in inet6_create(), meaning the socket was not IPv6 one.
The root cause is missing validation in netlbl_conn_setattr().
netlbl_conn_setattr() switches branches based on struct
sockaddr.sa_family, which is passed from userspace. However,
netlbl_conn_setattr() does not check if the address family matches
the socket.
The syzkaller must have called connect() for an IPv6 address on
an IPv4 socket.
We have a proper validation in tcp_v[46]_connect(), but
security_socket_connect() is called in the earlier stage.
Let's copy the validation to netlbl_conn_setattr().
[0]:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 2 UID: 0 PID: 12928 Comm: syz.9.1677 Not tainted 6.12.0 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:txopt_get include/net/ipv6.h:390 [inline]
RIP: 0010:
Code: 02 00 00 49 8b ac 24 f8 02 00 00 e8 84 69 2a fd e8 ff 00 16 fd 48 8d 7d 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 53 02 00 00 48 8b 6d 70 48 85 ed 0f 84 ab 01 00
RSP: 0018:ffff88811b8afc48 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: 1ffff11023715f8a RCX: ffffffff841ab00c
RDX: 000000000000000e RSI: ffffc90007d9e000 RDI: 0000000000000070
RBP: 0000000000000000 R08: ffffed1023715f9d R09: ffffed1023715f9e
R10: ffffed1023715f9d R11: 0000000000000003 R12: ffff888123075f00
R13: ffff88810245bd80 R14: ffff888113646780 R15: ffff888100578a80
FS: 00007f9019bd7640(0000) GS:ffff8882d2d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f901b927bac CR3: 0000000104788003 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<TASK>
calipso_sock_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:557
netlbl_conn_setattr+0x10c/0x280 net/netlabel/netlabel_kapi.c:1177
selinux_netlbl_socket_connect_helper+0xd3/0x1b0 security/selinux/netlabel.c:569
selinux_netlbl_socket_connect_locked security/selinux/netlabel.c:597 [inline]
selinux_netlbl_socket_connect+0xb6/0x100 security/selinux/netlabel.c:615
selinux_socket_connect+0x5f/0x80 security/selinux/hooks.c:4931
security_socket_connect+0x50/0xa0 security/security.c:4598
__sys_connect_file+0xa4/0x190 net/socket.c:2067
__sys_connect+0x12c/0x170 net/socket.c:2088
__do_sys_connect net/socket.c:2098 [inline]
__se_sys_connect net/socket.c:2095 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:2095
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f901b61a12d
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9019bd6fa8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00007f901b925fa0 RCX: 00007f901b61a12d
RDX: 000000000000001c RSI: 0000200000000140 RDI: 0000000000000003
RBP: 00007f901b701505 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f901b5b62a0 R15: 00007f9019bb7000
</TASK>
Modules linked in:
Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: John Cheung <john.cs.hey@gmail.com>
Closes: https://lore.kernel.org/netdev/CAP=Rh=M1LzunrcQB1fSGauMrJrhL6GGps5cPAKzHJXj6GQV+-g@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20250522221858.91240-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Jun 4 13:38:26 2025 +0000
calipso: unlock rcu before returning -EAFNOSUPPORT
commit 3cae906e1a6184cdc9e4d260e4dbdf9a118d94ad upstream.
syzbot reported that a recent patch forgot to unlock rcu
in the error path.
Adopt the convention that netlbl_conn_setattr() is already using.
Fixes: 6e9f2df1c550 ("calipso: Don't call calipso functions for AF_INET sk.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20250604133826.1667664-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pali Rohár <pali@kernel.org>
Date: Thu Dec 26 19:55:13 2024 +0100
cifs: Fix validation of SMB1 query reparse point response
[ Upstream commit 56e84c64fc257a95728ee73165456b025c48d408 ]
Validate the SMB1 query reparse point response per [MS-CIFS] section
2.2.7.2 NT_TRANSACT_IOCTL.
NT_TRANSACT_IOCTL response contains one word long setup data after which is
ByteCount member. So check that SetupCount is 1 before trying to read and
use ByteCount member.
Output setup data contains ReturnedDataLen member which is the output
length of executed IOCTL command by remote system. So check that output was
not truncated before transferring over network.
Change MaxSetupCount of NT_TRANSACT_IOCTL request from 4 to 1 as io_rsp
structure already expects one word long output setup data. This should
prevent server sending incompatible structure (in case it would be extended
in future, which is unlikely).
Change MaxParameterCount of NT_TRANSACT_IOCTL request from 2 to 0 as
NT IOCTL does not have any documented output parameters and this function
does not parse any output parameters at all.
Fixes: ed3e0a149b58 ("smb: client: implement ->query_reparse_point() for SMB1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Henry Martin <bsdhenrymartin@gmail.com>
Date: Wed Apr 2 10:05:13 2025 +0800
clk: bcm: rpi: Add NULL check in raspberrypi_clk_register()
[ Upstream commit 73c46d9a93d071ca69858dea3f569111b03e549e ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
raspberrypi_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 93d2725affd6 ("clk: bcm: rpi: Discover the firmware clocks")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250402020513.42628-1-bsdhenrymartin@gmail.com
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luca Weiss <luca.weiss@fairphone.com>
Date: Fri Apr 25 14:12:55 2025 +0200
clk: qcom: camcc-sm6350: Add *_wait_val values for GDSCs
[ Upstream commit e7b1c13280ad866f3b935f6c658713c41db61635 ]
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 80f5451d9a7c ("clk: qcom: Add camera clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-1-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luca Weiss <luca.weiss@fairphone.com>
Date: Fri Apr 25 14:12:56 2025 +0200
clk: qcom: dispcc-sm6350: Add *_wait_val values for GDSCs
[ Upstream commit 673989d27123618afab56df1143a75454178b4ae ]
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 837519775f1d ("clk: qcom: Add display clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-2-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vincent Knecht <vincent.knecht@mailoo.org>
Date: Mon Apr 14 18:45:12 2025 +0200
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
[ Upstream commit 9e7acf70cf6aa7b22f67d911f50a8cd510e8fb00 ]
Fix mclk0 & mclk1 parent map to use correct GPLL6 configuration and
freq_tbl to use GPLL6 instead of GPLL0 so that they tick at 24 MHz.
Fixes: 1664014e4679 ("clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller")
Suggested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20250414-gcc-msm8939-fixes-mclk-v2-resend2-v2-1-5ddcf572a6de@mailoo.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luca Weiss <luca.weiss@fairphone.com>
Date: Fri Apr 25 14:12:57 2025 +0200
clk: qcom: gcc-sm6350: Add *_wait_val values for GDSCs
[ Upstream commit afdfd829a99e467869e3ca1955fb6c6e337c340a ]
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-3-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luca Weiss <luca.weiss@fairphone.com>
Date: Fri Apr 25 14:12:58 2025 +0200
clk: qcom: gpucc-sm6350: Add *_wait_val values for GDSCs
[ Upstream commit d988b0b866c2aeb23aa74022b5bbd463165a7a33 ]
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used, with the exception of
gpu_cx_gdsc which has an explicit value (qcom,clk-dis-wait-val = <8>).
Fixes: 013804a727a0 ("clk: qcom: Add GPU clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-4-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yeoreum Yun <yeoreum.yun@arm.com>
Date: Wed May 14 17:19:51 2025 +0100
coresight: prevent deactivate active config while enabling the config
[ Upstream commit 408c97c4a5e0b634dcd15bf8b8808b382e888164 ]
While enable active config via cscfg_csdev_enable_active_config(),
active config could be deactivated via configfs' sysfs interface.
This could make UAF issue in below scenario:
CPU0 CPU1
(sysfs enable) load module
cscfg_load_config_sets()
activate config. // sysfs
(sys_active_cnt == 1)
...
cscfg_csdev_enable_active_config()
lock(csdev->cscfg_csdev_lock)
// here load config activate by CPU1
unlock(csdev->cscfg_csdev_lock)
deactivate config // sysfs
(sys_activec_cnt == 0)
cscfg_unload_config_sets()
unload module
// access to config_desc which freed
// while unloading module.
cscfg_csdev_enable_config
To address this, use cscfg_config_desc's active_cnt as a reference count
which will be holded when
- activate the config.
- enable the activated config.
and put the module reference when config_active_cnt == 0.
Fixes: f8cce2ff3c04 ("coresight: syscfg: Add API to activate and enable configurations")
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250514161951.3427590-4-yeoreum.yun@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Date: Mon Mar 31 18:36:40 2025 +0200
counter: interrupt-cnt: Protect enable/disable OPs with mutex
[ Upstream commit 7351312632e831e51383f48957d47712fae791ef ]
Enable/disable seems to be racy on SMP, consider the following scenario:
CPU0 CPU1
interrupt_cnt_enable_write(true)
{
if (priv->enabled == enable)
return 0;
if (enable) {
priv->enabled = true;
interrupt_cnt_enable_write(false)
{
if (priv->enabled == enable)
return 0;
if (enable) {
priv->enabled = true;
enable_irq(priv->irq);
} else {
disable_irq(priv->irq)
priv->enabled = false;
}
enable_irq(priv->irq);
} else {
disable_irq(priv->irq);
priv->enabled = false;
}
The above would result in priv->enabled == false, but IRQ left enabled.
Protect both write (above race) and read (to propagate the value on SMP)
callbacks with a mutex.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Fixes: a55ebd47f21f ("counter: add IRQ or GPIO based counter")
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250331163642.2382651-1-alexander.sverdlin@siemens.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Thu May 15 16:28:08 2025 +0800
crypto: lrw - Only add ecb if it is not already there
[ Upstream commit 3d73909bddc2ebb3224a8bc2e5ce00e9df70c15d ]
Only add ecb to the cipher name if it isn't already ecb.
Also use memcmp instead of strncmp since these strings are all
stored in an array of length CRYPTO_MAX_ALG_NAME.
Fixes: 700cb3f5fe75 ("crypto: lrw - Convert to skcipher")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202505151503.d8a6cf10-lkp@intel.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Sat May 10 18:43:33 2025 +0800
crypto: marvell/cesa - Avoid empty transfer descriptor
[ Upstream commit 1bafd82d9a40cf09c6c40f1c09cc35b7050b1a9f ]
The user may set req->src even if req->nbytes == 0. If there
is no data to hash from req->src, do not generate an empty TDMA
descriptor.
Fixes: db509a45339f ("crypto: marvell/cesa - add TDMA support")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Sat May 10 18:41:31 2025 +0800
crypto: marvell/cesa - Handle zero-length skcipher requests
[ Upstream commit 8a4e047c6cc07676f637608a9dd675349b5de0a7 ]
Do not access random memory for zero-length skcipher requests.
Just return 0.
Fixes: f63601fd616a ("crypto: marvell/cesa - add a new driver for Marvell's CESA")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Date: Fri May 16 15:06:56 2025 +0300
crypto: sun8i-ce - move fallback ahash_request to the end of the struct
[ Upstream commit c822831b426307a6ca426621504d3c7f99765a39 ]
'struct ahash_request' has a flexible array at the end, so it must be the
last member in a struct, to avoid overwriting other struct members.
Therefore, move 'fallback_req' to the end of the 'sun8i_ce_hash_reqctx'
struct.
Fixes: 56f6d5aee88d ("crypto: sun8i-ce - support hash algorithms")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Date: Fri Apr 25 15:45:14 2025 +0300
crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare()
[ Upstream commit f31adc3e356f7350d4a4d68c98d3f60f2f6e26b3 ]
Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare():
1] If dma_map_sg() fails for areq->dst, the device driver would try to free
DMA memory it has not allocated in the first place. To fix this, on the
"theend_sgs" error path, call dma unmap only if the corresponding dma
map was successful.
2] If the dma_map_single() call for the IV fails, the device driver would
try to free an invalid DMA memory address on the "theend_iv" path:
------------[ cut here ]------------
DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address
WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90
Modules linked in: skcipher_example(O+)
CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT
Tainted: [O]=OOT_MODULE
Hardware name: OrangePi Zero2 (DT)
pc : check_unmap+0x123c/0x1b90
lr : check_unmap+0x123c/0x1b90
...
Call trace:
check_unmap+0x123c/0x1b90 (P)
debug_dma_unmap_page+0xac/0xc0
dma_unmap_page_attrs+0x1f4/0x5fc
sun8i_ce_cipher_do_one+0x1bd4/0x1f40
crypto_pump_work+0x334/0x6e0
kthread_worker_fn+0x21c/0x438
kthread+0x374/0x664
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
To fix this, check for !dma_mapping_error() before calling
dma_unmap_single() on the "theend_iv" path.
Fixes: 06f751b61329 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Date: Tue Apr 1 22:23:16 2025 +0300
crypto: sun8i-ce-hash - fix error handling in sun8i_ce_hash_run()
[ Upstream commit ea4dd134ef332bd9e3e734c1ba0a1521f436b678 ]
Rework error handling in sun8i_ce_hash_run() to unmap the dma buffers in
case of failure. Currently, the dma unmap functions are not called if the
function errors out at various points.
Fixes: 56f6d5aee88d1 ("crypto: sun8i-ce - support hash algorithms")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Corentin Labbe <clabbe.montjoie@gmail.com>
Date: Sun Apr 27 13:12:36 2025 +0200
crypto: sun8i-ss - do not use sg_dma_len before calling DMA functions
[ Upstream commit 2dfc7cd74a5e062a5405560447517e7aab1c7341 ]
When testing sun8i-ss with multi_v7_defconfig, all CBC algorithm fail crypto
selftests.
This is strange since on sunxi_defconfig, everything was ok.
The problem was in the IV setup loop which never run because sg_dma_len
was 0.
Fixes: 359e893e8af4 ("crypto: sun8i-ss - rework handling of IV")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Thu May 15 16:34:04 2025 +0800
crypto: xts - Only add ecb if it is not already there
[ Upstream commit 270b6f13454cb7f2f7058c50df64df409c5dcf55 ]
Only add ecb to the cipher name if it isn't already ecb.
Also use memcmp instead of strncmp since these strings are all
stored in an array of length CRYPTO_MAX_ALG_NAME.
Fixes: f1c131b45410 ("crypto: xts - Convert to skcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Benjamin Marzinski <bmarzins@redhat.com>
Date: Tue Apr 22 19:47:36 2025 -0400
dm-flakey: error all IOs when num_features is absent
[ Upstream commit 40ed054f39bc99eac09871c33198e501f4acdf24 ]
dm-flakey would error all IOs if num_features was 0, but if it was
absent, dm-flakey would never error any IO. Fix this so that no
num_features works the same as num_features set to 0.
Fixes: aa7d7bc99fed7 ("dm flakey: add an "error_reads" option")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Benjamin Marzinski <bmarzins@redhat.com>
Date: Tue Apr 22 19:47:38 2025 -0400
dm-flakey: make corrupting read bios work
[ Upstream commit 13e79076c89f6e96a6cca8f6df38b40d025907b4 ]
dm-flakey corrupts the read bios in the endio function. However, the
corrupt_bio_* functions checked bio_has_data() to see if there was data
to corrupt. Since this was the endio function, there was no data left to
complete, so bio_has_data() was always false. Fix this by saving a copy
of the bio's bi_iter in flakey_map(), and using this to initialize the
iter for corrupting the read bios. This patch also skips cloning the bio
for write bios with no data.
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Fixes: a3998799fb4df ("dm flakey: add corrupt_bio_byte feature")
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Benjamin Marzinski <bmarzins@redhat.com>
Date: Thu Apr 10 15:49:38 2025 -0400
dm: don't change md if dm_table_set_restrictions() fails
[ Upstream commit 9eb7109a5bfc5b8226e9517e9f3cc6d414391884 ]
__bind was changing the disk capacity, geometry and mempools of the
mapped device before calling dm_table_set_restrictions() which could
fail, forcing dm to drop the new table. Failing here would leave the
device using the old table but with the wrong capacity and mempools.
Move dm_table_set_restrictions() earlier in __bind(). Since it needs the
capacity to be set, save the old version and restore it on failure.
Fixes: bb37d77239af2 ("dm: introduce zone append emulation")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Benjamin Marzinski <bmarzins@redhat.com>
Date: Thu Apr 10 15:49:39 2025 -0400
dm: free table mempools if not used in __bind
[ Upstream commit e8819e7f03470c5b468720630d9e4e1d5b99159e ]
With request-based dm, the mempools don't need reloading when switching
tables, but the unused table mempools are not freed until the active
table is finally freed. Free them immediately if they are not needed.
Fixes: 29dec90a0f1d9 ("dm: fix bio_set allocation")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Henry Martin <bsdhenrymartin@gmail.com>
Date: Wed Apr 2 10:39:00 2025 +0800
dmaengine: ti: Add NULL check in udma_probe()
[ Upstream commit fd447415e74bccd7362f760d4ea727f8e1ebfe91 ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
udma_probe() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Nathan Lynch <nathan.lynch@amd.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20250402023900.43440-1-bsdhenrymartin@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Jun 4 12:27:08 2025 -0400
do_change_type(): refuse to operate on unmounted/not ours mounts
[ Upstream commit 12f147ddd6de7382dad54812e65f3f08d05809fc ]
Ensure that propagation settings can only be changed for mounts located
in the caller's mount namespace. This change aligns permission checking
with the rest of mount(2).
Reviewed-by: Christian Brauner <brauner@kernel.org>
Fixes: 07b20889e305 ("beginning of the shared-subtree proper")
Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yanqing Wang <ot_yanqing.wang@mediatek.com>
Date: Wed May 28 15:53:51 2025 +0800
driver: net: ethernet: mtk_star_emac: fix suspend/resume issue
[ Upstream commit ba99c627aac85bc746fb4a6e2d79edb3ad100326 ]
Identify the cause of the suspend/resume hang: netif_carrier_off()
is called during link state changes and becomes stuck while
executing linkwatch_work().
To resolve this issue, call netif_device_detach() during the Ethernet
suspend process to temporarily detach the network device from the
kernel and prevent the suspend/resume hang.
Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Yanqing Wang <ot_yanqing.wang@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Link: https://patch.msgid.link/20250528075351.593068-1-macpaul.lin@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Charles Han <hanchunchao@inspur.com>
Date: Thu Mar 27 12:04:35 2025 +0800
drm/amd/pp: Fix potential NULL pointer dereference in atomctrl_initialize_mc_reg_table
[ Upstream commit 820116a39f96bdc7d426c33a804b52f53700a919 ]
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced.
Fixes: b3892e2bb519 ("drm/amd/pp: Use atombios api directly in powerplay (v2)")
Fixes: 5f92b48cf62c ("drm/amd/pm: add mc register table initialization")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Fri Apr 18 08:48:16 2025 +0200
drm/bridge: lt9611uxc: Fix an error handling path in lt9611uxc_probe()
[ Upstream commit b848cd418aebdb313364b4843f41fae82281a823 ]
If lt9611uxc_audio_init() fails, some resources still need to be released
before returning the error code.
Use the existing error handling path.
Fixes: 0cbbd5b1a012 ("drm: bridge: add support for lontium LT9611UXC bridge")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/f167608e392c6b4d7d7f6e45e3c21878feb60cbd.1744958833.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Thu Apr 3 12:47:38 2025 +0200
drm/mediatek: Fix kobject put for component sub-drivers
[ Upstream commit 80805b62ea5b95eda54c225b989f929ca0691ab0 ]
In function mtk_drm_get_all_drm_priv(), this driver is incrementing
the refcount for the sub-drivers of mediatek-drm with a call to
device_find_child() when taking a reference to all of those child
devices.
When the component bind fails multiple times this results in a
refcount_t overflow, as the reference count is never decremented:
fix that by adding a call to put_device() for all of the mmsys
devices in a loop, in error cases of mtk_drm_bind() and in the
mtk_drm_unbind() callback.
Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Thu Apr 3 12:47:37 2025 +0200
drm/mediatek: mtk_drm_drv: Fix kobject put for mtk_mutex device ptr
[ Upstream commit 22918591fb747a6d16801e74a170cf98e886f83b ]
This driver is taking a kobject for mtk_mutex only once per mmsys
device for each drm-mediatek driver instance, differently from the
behavior with other components, but it is decrementing the kobj's
refcount in a loop and once per mmsys: this is not right and will
result in a refcount_t underflow warning when mediatek-drm returns
multiple probe deferrals in one boot (or when manually bound and
unbound).
Besides that, the refcount for mutex_dev was not decremented for
error cases in mtk_drm_bind(), causing another refcount_t warning
but this time for overflow, when the failure happens not during
driver bind but during component bind.
In order to fix one of the reasons why this is happening, remove
the put_device(xx->mutex_dev) loop from the mtk_drm_kms_init()'s
put_mutex_dev label (and drop the label) and add a single call to
correctly free the single incremented refcount of mutex_dev to
the mtk_drm_unbind() function to fix the refcount_t underflow.
Moreover, add the same call to the error cases in mtk_drm_bind()
to fix the refcount_t overflow.
Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Thu Apr 3 12:47:39 2025 +0200
drm/mediatek: mtk_drm_drv: Unbind secondary mmsys components on err
[ Upstream commit 94c933716567084bfb9e79dcd81eb2b2308e84e1 ]
When calling component_bind_all(), if a component that is included
in the list fails, all of those that have been successfully bound
will be unbound, but this driver has two components lists for two
actual devices, as in, each mmsys instance has its own components
list.
In case mmsys0 (or actually vdosys0) is able to bind all of its
components, but the secondary one fails, all of the components of
the first are kept bound, while the ones of mmsys1/vdosys1 are
correctly cleaned up.
This is not right because, in case of a failure, the components
are re-bound for all of the mmsys/vdosys instances without caring
about the ones that were previously left in a bound state.
Fix that by calling component_unbind_all() on all of the previous
component masters that succeeded binding all subdevices when any
of the other masters errors out.
Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Fri Jun 6 22:37:29 2025 +0200
drm/meson: fix debug log statement when setting the HDMI clocks
[ Upstream commit d17e61ab63fb7747b340d6a66bf1408cd5c6562b ]
The "phy" and "vclk" frequency labels were swapped, making it more
difficult to debug driver errors. Swap the label order to make them
match with the actual frequencies printed to correct this.
Fixes: e5fab2ec9ca4 ("drm/meson: vclk: add support for YUV420 setup")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250606203729.3311592-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Mon Jun 9 22:27:51 2025 +0200
drm/meson: fix more rounding issues with 59.94Hz modes
[ Upstream commit 0cee6c4d3518b2e757aedae78771f17149f57653 ]
Commit 1017560164b6 ("drm/meson: use unsigned long long / Hz for
frequency types") attempts to resolve video playback using 59.94Hz.
using YUV420 by changing the clock calculation to use
Hz instead of kHz (thus yielding more precision).
The basic calculation itself is correct, however the comparisions in
meson_vclk_vic_supported_freq() and meson_vclk_setup() don't work
anymore for 59.94Hz modes (using the freq * 1000 / 1001 logic). For
example, drm/edid specifies a 593407kHz clock for 3840x2160@59.94Hz.
With the mentioend commit we convert this to Hz. Then meson_vclk
tries to find a matchig "params" entry (as the clock setup code
currently only supports specific frequencies) by taking the venc_freq
from the params and calculating the "alt frequency" (used for the
59.94Hz modes) from it, which is:
(594000000Hz * 1000) / 1001 = 593406593Hz
Similar calculation is applied to the phy_freq (TMDS clock), which is 10
times the pixel clock.
Implement a new meson_vclk_freqs_are_matching_param() function whose
purpose is to compare if the requested and calculated frequencies. They
may not match exactly (for the reasons mentioned above). Allow the
clocks to deviate slightly to make the 59.94Hz modes again.
Fixes: 1017560164b6 ("drm/meson: use unsigned long long / Hz for frequency types")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250609202751.962208-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: I Hsin Cheng <richard120310@gmail.com>
Date: Tue May 6 02:43:38 2025 +0800
drm/meson: Use 1000ULL when operating with mode->clock
commit eb0851e14432f3b87c77b704c835ac376deda03a upstream.
Coverity scan reported the usage of "mode->clock * 1000" may lead to
integer overflow. Use "1000ULL" instead of "1000"
when utilizing it to avoid potential integer overflow issue.
Link: https://scan5.scan.coverity.com/#/project-view/10074/10063?selectedIssue=1646759
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Fixes: 1017560164b6 ("drm/meson: use unsigned long long / Hz for frequency types")
Link: https://lore.kernel.org/r/20250505184338.678540-1-richard120310@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Mon Apr 21 22:13:00 2025 +0200
drm/meson: use unsigned long long / Hz for frequency types
[ Upstream commit 1017560164b6bbcbc93579266926e6e96675262a ]
Christian reports that 4K output using YUV420 encoding fails with the
following error:
Fatal Error, invalid HDMI vclk freq 593406
Modetest shows the following:
3840x2160 59.94 3840 4016 4104 4400 2160 2168 2178 2250 593407 flags: xxxx, xxxx,
drm calculated value -------------------------------------^
This indicates that there's a (1kHz) mismatch between the clock
calculated by the drm framework and the meson driver.
Relevant function call stack:
(drm framework)
-> meson_encoder_hdmi_atomic_enable()
-> meson_encoder_hdmi_set_vclk()
-> meson_vclk_setup()
The video clock requested by the drm framework is 593407kHz. This is
passed by meson_encoder_hdmi_atomic_enable() to
meson_encoder_hdmi_set_vclk() and the following formula is applied:
- the frequency is halved (which would be 296703.5kHz) and rounded down
to the next full integer, which is 296703kHz
- TMDS clock is calculated (296703kHz * 10)
- video encoder clock is calculated - this needs to match a table from
meson_vclk.c and so it doubles the previously halved value again
(resulting in 593406kHz)
- meson_vclk_setup() can't find (either directly, or by deriving it from
594000kHz * 1000 / 1001 and rounding to the closest integer value -
which is 593407kHz as originally requested by the drm framework) a
matching clock in it's internal table and errors out with "invalid
HDMI vclk freq"
Fix the division precision by switching the whole meson driver to use
unsigned long long (64-bit) Hz values for clock frequencies instead of
unsigned int (32-bit) kHz to fix the rouding error.
Fixes: e5fab2ec9ca4 ("drm/meson: vclk: add support for YUV420 setup")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250421201300.778955-3-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250421201300.778955-3-martin.blumenstingl@googlemail.com
Stable-dep-of: d17e61ab63fb ("drm/meson: fix debug log statement when setting the HDMI clocks")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Sat Jun 7 00:10:31 2025 +0200
drm/meson: use vclk_freq instead of pixel_freq in debug print
[ Upstream commit faf2f8382088e8c74bd6eeb236c8c9190e61615e ]
meson_vclk_vic_supported_freq() has a debug print which includes the
pixel freq. However, within the whole function the pixel freq is
irrelevant, other than checking the end of the params array. Switch to
printing the vclk_freq which is being compared / matched against the
inputs to the function to avoid confusion when analyzing error reports
from users.
Fixes: e5fab2ec9ca4 ("drm/meson: vclk: add support for YUV420 setup")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250606221031.3419353-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Biju Das <biju.das.jz@bp.renesas.com>
Date: Wed Feb 5 11:21:35 2025 +0000
drm/tegra: rgb: Fix the unbound reference count
[ Upstream commit 3c3642335065c3bde0742b0edc505b6ea8fdc2b3 ]
The of_get_child_by_name() increments the refcount in tegra_dc_rgb_probe,
but the driver does not decrement the refcount during unbind. Fix the
unbound reference count using devm_add_action_or_reset() helper.
Fixes: d8f4a9eda006 ("drm: Add NVIDIA Tegra20 support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250205112137.36055-1-biju.das.jz@bp.renesas.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maxime Ripard <mripard@kernel.org>
Date: Thu Apr 3 15:33:30 2025 +0200
drm/vc4: tests: Use return instead of assert
[ Upstream commit 9e26a3740cc08ef8bcdc5e5d824792cd677affce ]
The vc4_mock_atomic_add_output() and vc4_mock_atomic_del_output() assert
that the functions they are calling didn't fail. Since some of them can
return EDEADLK, we can't properly deal with it.
Since both functions are expected to return an int, and all caller check
the return value, let's just properly propagate the errors when they
occur.
Fixes: f759f5b53f1c ("drm/vc4: tests: Introduce a mocking infrastructure")
Fixes: 76ec18dc5afa ("drm/vc4: tests: Add unit test suite for the PV muxing")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250403-drm-vc4-kunit-failures-v2-1-e09195cc8840@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <kees@kernel.org>
Date: Fri Apr 25 23:14:32 2025 -0700
drm/vkms: Adjust vkms_state->active_planes allocation type
[ Upstream commit 258aebf100540d36aba910f545d4d5ddf4ecaf0b ]
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct vkms_plane_state **", but the returned type
will be "struct drm_plane **". These are the same size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Fixes: 8b1865873651 ("drm/vkms: totally reworked crc data tracking")
Link: https://lore.kernel.org/r/20250426061431.work.304-kees@kernel.org
Signed-off-by: Louis Chauvet <contact@louischauvet.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ian Forbes <ian.forbes@broadcom.com>
Date: Fri Feb 28 14:06:33 2025 -0600
drm/vmwgfx: Add seqno waiter for sync_files
[ Upstream commit 0039a3b35b10d9c15d3d26320532ab56cc566750 ]
Because sync_files are passive waiters they do not participate in
the processing of fences like the traditional vmw_fence_wait IOCTL.
If userspace exclusively uses sync_files for synchronization then
nothing in the kernel actually processes fence updates as interrupts
for fences are masked and ignored if the kernel does not indicate to the
SVGA device that there are active waiters.
This oversight results in a bug where the entire GUI can freeze waiting
on a sync_file that will never be signalled as we've masked the interrupts
to signal its completion. This bug is incredibly racy as any process which
interacts with the fencing code via the 3D stack can process the stuck
fences on behalf of the stuck process causing it to run again. Even a
simple app like eglinfo is enough to resume the stuck process. Usually
this bug is seen at a login screen like GDM because there are no other
3D apps running.
By adding a seqno waiter we re-enable interrupt based processing of the
dma_fences associated with the sync_file which is signalled as part of a
dma_fence_callback.
This has likely been broken since it was initially added to the kernel in
2017 but has gone unnoticed until mutter recently started using sync_files
heavily over the course of 2024 as part of their explicit sync support.
Fixes: c906965dee22 ("drm/vmwgfx: Add export fence to file descriptor support")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228200633.642417-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Biju Das <biju.das.jz@bp.renesas.com>
Date: Thu Nov 16 12:24:24 2023 +0000
drm: rcar-du: Fix memory leak in rcar_du_vsps_init()
[ Upstream commit 91e3bf09a90bb4340c0c3c51396e7531555efda4 ]
The rcar_du_vsps_init() doesn't free the np allocated by
of_parse_phandle_with_fixed_args() for the non-error case.
Fix memory leak for the non-error case.
While at it, replace the label 'error'->'done' as it applies to non-error
case as well and update the error check condition for rcar_du_vsp_init()
to avoid breakage in future, if it returns positive value.
Fixes: 3e81374e2014 ("drm: rcar-du: Support multiple sources from the same VSP")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20231116122424.80136-1-biju.das.jz@bp.renesas.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xu Yang <xu.yang_2@nxp.com>
Date: Wed Apr 30 17:44:59 2025 +0800
dt-bindings: phy: imx8mq-usb: fix fsl,phy-tx-vboost-level-microvolt property
commit 5b3a91b207c00a8d27f75ce8aaa9860844da72c8 upstream.
The ticket TKT0676370 shows the description of TX_VBOOST_LVL is wrong in
register PHY_CTRL3 bit[31:29].
011: Corresponds to a launch amplitude of 1.12 V.
010: Corresponds to a launch amplitude of 1.04 V.
000: Corresponds to a launch amplitude of 0.88 V.
After updated:
011: Corresponds to a launch amplitude of 0.844 V.
100: Corresponds to a launch amplitude of 1.008 V.
101: Corresponds to a launch amplitude of 1.156 V.
This will correct it accordingly.
Fixes: b2e75563dc39 ("dt-bindings: phy: imx8mq-usb: add phy tuning properties")
Cc: stable@vger.kernel.org
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250430094502.2723983-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Date: Fri Apr 25 17:18:07 2025 +0200
dt-bindings: usb: cypress,hx3: Add support for all variants
commit 1ad4b5a7de16806afc1aeaf012337e62af04e001 upstream.
The Cypress HX3 hubs use different default PID value depending
on the variant. Update compatibles list.
Becasuse all hub variants use the same driver data, allow the
dt node to have two compatibles: leftmost which matches the HW
exactly, and the second one as fallback.
Fixes: 1eca51f58a10 ("dt-bindings: usb: Add binding for Cypress HX3 USB 3.0 family")
Cc: stable@vger.kernel.org # 6.6
Cc: stable@vger.kernel.org # Backport of the patch ("dt-bindings: usb: usb-device: relax compatible pattern to a contains") from list: https://lore.kernel.org/linux-usb/20250418-dt-binding-usb-device-compatibles-v2-1-b3029f14e800@cherry.de/
Cc: stable@vger.kernel.org # Backport of the patch in this series fixing product ID in onboard_dev_id_table in drivers/usb/misc/onboard_usb_dev.c driver
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-2-4a76a474a010@thaumatec.com
[taken with Greg's blessing]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andre Przywara <andre.przywara@arm.com>
Date: Mon May 5 17:47:27 2025 +0100
dt-bindings: vendor-prefixes: Add Liontron name
[ Upstream commit 9baa27a2e9fc746143ab686b6dbe2d515284a4c5 ]
Liontron is a company based in Shenzen, China, making industrial
development boards and embedded computers, mostly using Rockchip and
Allwinner SoCs.
Add their name to the list of vendors.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250505164729.18175-2-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Date: Thu Apr 17 23:07:18 2025 +0800
EDAC/skx_common: Fix general protection fault
[ Upstream commit 20d2d476b3ae18041be423671a8637ed5ffd6958 ]
After loading i10nm_edac (which automatically loads skx_edac_common), if
unload only i10nm_edac, then reload it and perform error injection testing,
a general protection fault may occur:
mce: [Hardware Error]: Machine check events logged
Oops: general protection fault ...
...
Workqueue: events mce_gen_pool_process
RIP: 0010:string+0x53/0xe0
...
Call Trace:
<TASK>
? die_addr+0x37/0x90
? exc_general_protection+0x1e7/0x3f0
? asm_exc_general_protection+0x26/0x30
? string+0x53/0xe0
vsnprintf+0x23e/0x4c0
snprintf+0x4d/0x70
skx_adxl_decode+0x16a/0x330 [skx_edac_common]
skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common]
skx_mce_check_error+0x17/0x20 [skx_edac_common]
...
The issue arose was because the variable 'adxl_component_count' (inside
skx_edac_common), which counts the ADXL components, was not reset. During
the reloading of i10nm_edac, the count was incremented by the actual number
of ADXL components again, resulting in a count that was double the real
number of ADXL components. This led to an out-of-bounds reference to the
ADXL component array, causing the general protection fault above.
Fix this issue by resetting the 'adxl_component_count' in adxl_put(),
which is called during the unloading of {skx,i10nm}_edac.
Fixes: 123b15863550 ("EDAC, i10nm: make skx_common.o a separate module")
Reported-by: Feng Xu <feng.f.xu@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Link: https://lore.kernel.org/r/20250417150724.1170168-2-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Date: Thu Apr 17 23:07:19 2025 +0800
EDAC/{skx_common,i10nm}: Fix the loss of saved RRL for HBM pseudo channel 0
[ Upstream commit eeed3e03f4261e5e381a72ae099ff00ccafbb437 ]
When enabling the retry_rd_err_log (RRL) feature during the loading of the
i10nm_edac driver with the module parameter retry_rd_err_log=2 (Linux RRL
control mode), the default values of the control bits of RRL are saved so
that they can be restored during the unloading of the driver.
In the current code, the RRL of pseudo channel 1 of HBM overwrites pseudo
channel 0 during the loading of the driver, resulting in the loss of saved
RRL for pseudo channel 0. This causes the RRL of pseudo channel 0 of HBM to
be wrongly restored with the values from pseudo channel 1 when unloading
the driver.
Fix this issue by creating two separate groups of RRL control registers
per channel to save default RRL settings of two {sub-,pseudo-}channels.
Fixes: acd4cf68fefe ("EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBM")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Link: https://lore.kernel.org/r/20250417150724.1170168-3-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans Zhang <18255117159@163.com>
Date: Wed May 7 00:31:11 2025 +0800
efi/libstub: Describe missing 'out' parameter in efi_load_initrd
[ Upstream commit c8e1927e7f7d63721e32ec41d27ccb0eb1a1b0fc ]
The function efi_load_initrd() had a documentation warning due to
the missing description for the 'out' parameter. Add the parameter
description to the kernel-doc comment to resolve the warning and
improve API documentation.
Fixes the following compiler warning:
drivers/firmware/efi/libstub/efi-stub-helper.c:611: warning: Function parameter or struct member 'out' not described in 'efi_load_initrd'
Fixes: f4dc7fffa987 ("efi: libstub: unify initrd loading between architectures")
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Mon Apr 14 18:52:36 2025 +0800
f2fs: clean up w/ fscrypt_is_bounce_page()
[ Upstream commit 0c708e35cf26449ca317fcbfc274704660b6d269 ]
Just cleanup, no logic changes.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhiguo Niu <zhiguo.niu@unisoc.com>
Date: Wed May 14 16:45:49 2025 +0800
f2fs: fix to correct check conditions in f2fs_cross_rename
[ Upstream commit 9883494c45a13dc88d27dde4f988c04823b42a2f ]
Should be "old_dir" here.
Fixes: 5c57132eaf52 ("f2fs: support project quota")
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Mon Apr 14 18:52:37 2025 +0800
f2fs: fix to detect gcing page in f2fs_is_cp_guaranteed()
[ Upstream commit aa1be8dd64163eca4dde7fd2557eb19927a06a47 ]
Jan Prusakowski reported a f2fs bug as below:
f2fs/007 will hang kernel during testing w/ below configs:
kernel 6.12.18 (from pixel-kernel/android16-6.12)
export MKFS_OPTIONS="-O encrypt -O extra_attr -O project_quota -O quota"
export F2FS_MOUNT_OPTIONS="test_dummy_encryption,discard,fsync_mode=nobarrier,reserve_root=32768,checkpoint_merge,atgc"
cat /proc/<umount_proc_id>/stack
f2fs_wait_on_all_pages+0xa3/0x130
do_checkpoint+0x40c/0x5d0
f2fs_write_checkpoint+0x258/0x550
kill_f2fs_super+0x14f/0x190
deactivate_locked_super+0x30/0xb0
cleanup_mnt+0xba/0x150
task_work_run+0x59/0xa0
syscall_exit_to_user_mode+0x12d/0x130
do_syscall_64+0x57/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
cat /sys/kernel/debug/f2fs/status
- IO_W (CP: -256, Data: 256, Flush: ( 0 0 1), Discard: ( 0 0)) cmd: 0 undiscard: 0
CP IOs reference count becomes negative.
The root cause is:
After 4961acdd65c9 ("f2fs: fix to tag gcing flag on page during block
migration"), we will tag page w/ gcing flag for raw page of cluster
during its migration.
However, if the inode is both encrypted and compressed, during
ioc_decompress(), it will tag page w/ gcing flag, and it increase
F2FS_WB_DATA reference count:
- f2fs_write_multi_page
- f2fs_write_raw_page
- f2fs_write_single_page
- do_write_page
- f2fs_submit_page_write
- WB_DATA_TYPE(bio_page, fio->compressed_page)
: bio_page is encrypted, so mapping is NULL, and fio->compressed_page
is NULL, it returns F2FS_WB_DATA
- inc_page_count(.., F2FS_WB_DATA)
Then, during end_io(), it decrease F2FS_WB_CP_DATA reference count:
- f2fs_write_end_io
- f2fs_compress_write_end_io
- fscrypt_pagecache_folio
: get raw page from encrypted page
- WB_DATA_TYPE(&folio->page, false)
: raw page has gcing flag, it returns F2FS_WB_CP_DATA
- dec_page_count(.., F2FS_WB_CP_DATA)
In order to fix this issue, we need to detect gcing flag in raw page
in f2fs_is_cp_guaranteed().
Fixes: 4961acdd65c9 ("f2fs: fix to tag gcing flag on page during block migration")
Reported-by: Jan Prusakowski <jprusakowski@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Tue Apr 8 20:22:08 2025 +0800
f2fs: fix to do sanity check on sbi->total_valid_block_count
[ Upstream commit 05872a167c2cab80ef186ef23cc34a6776a1a30c ]
syzbot reported a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/f2fs.h:2521!
RIP: 0010:dec_valid_block_count+0x3b2/0x3c0 fs/f2fs/f2fs.h:2521
Call Trace:
f2fs_truncate_data_blocks_range+0xc8c/0x11a0 fs/f2fs/file.c:695
truncate_dnode+0x417/0x740 fs/f2fs/node.c:973
truncate_nodes+0x3ec/0xf50 fs/f2fs/node.c:1014
f2fs_truncate_inode_blocks+0x8e3/0x1370 fs/f2fs/node.c:1197
f2fs_do_truncate_blocks+0x840/0x12b0 fs/f2fs/file.c:810
f2fs_truncate_blocks+0x10d/0x300 fs/f2fs/file.c:838
f2fs_truncate+0x417/0x720 fs/f2fs/file.c:888
f2fs_setattr+0xc4f/0x12f0 fs/f2fs/file.c:1112
notify_change+0xbca/0xe90 fs/attr.c:552
do_truncate+0x222/0x310 fs/open.c:65
handle_truncate fs/namei.c:3466 [inline]
do_open fs/namei.c:3849 [inline]
path_openat+0x2e4f/0x35d0 fs/namei.c:4004
do_filp_open+0x284/0x4e0 fs/namei.c:4031
do_sys_openat2+0x12b/0x1d0 fs/open.c:1429
do_sys_open fs/open.c:1444 [inline]
__do_sys_creat fs/open.c:1522 [inline]
__se_sys_creat fs/open.c:1516 [inline]
__x64_sys_creat+0x124/0x170 fs/open.c:1516
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/syscall_64.c:94
The reason is: in fuzzed image, sbi->total_valid_block_count is
inconsistent w/ mapped blocks indexed by inode, so, we should
not trigger panic for such case, instead, let's print log and
set fsck flag.
Fixes: 39a53e0ce0df ("f2fs: add superblock and major in-memory structure")
Reported-by: syzbot+8b376a77b2f364097fbe@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/67f3c0b2.050a0220.396535.0547.GAE@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhiguo Niu <zhiguo.niu@unisoc.com>
Date: Wed May 14 16:45:48 2025 +0800
f2fs: use d_inode(dentry) cleanup dentry->d_inode
[ Upstream commit a6c397a31f58a1d577c2c8d04b624e9baa31951c ]
no logic changes.
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sergey Shtylyov <s.shtylyov@omp.ru>
Date: Wed May 14 23:35:58 2025 +0300
fbdev: core: fbcvt: avoid division by 0 in fb_cvt_hperiod()
[ Upstream commit 3f6dae09fc8c306eb70fdfef70726e1f154e173a ]
In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000,
cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's
then passed to fb_cvt_hperiod(), where it's used as a divider -- division
by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to
avoid such overflow...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 96fe6a2109db ("[PATCH] fbdev: Add VESA Coordinated Video Timings (CVT) support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Tue Mar 18 23:17:12 2025 +0800
firmware: psci: Fix refcount leak in psci_dt_init
[ Upstream commit 7ff37d29fd5c27617b9767e1b8946d115cf93a1e ]
Fix a reference counter leak in psci_dt_init() where of_node_put(np) was
missing after of_find_matching_node_and_match() when np is unavailable.
Fixes: d09a0011ec0d ("drivers: psci: Allow PSCI node to be disabled")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250318151712.28763-1-linmq006@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Huang Yiwei <quic_hyiwei@quicinc.com>
Date: Wed May 7 12:57:57 2025 +0800
firmware: SDEI: Allow sdei initialization without ACPI_APEI_GHES
[ Upstream commit 59529bbe642de4eb2191a541d9b4bae7eb73862e ]
SDEI usually initialize with the ACPI table, but on platforms where
ACPI is not used, the SDEI feature can still be used to handle
specific firmware calls or other customized purposes. Therefore, it
is not necessary for ARM_SDE_INTERFACE to depend on ACPI_APEI_GHES.
In commit dc4e8c07e9e2 ("ACPI: APEI: explicit init of HEST and GHES
in acpi_init()"), to make APEI ready earlier, sdei_init was moved
into acpi_ghes_init instead of being a standalone initcall, adding
ACPI_APEI_GHES dependency to ARM_SDE_INTERFACE. This restricts the
flexibility and usability of SDEI.
This patch corrects the dependency in Kconfig and splits sdei_init()
into two separate functions: sdei_init() and acpi_sdei_init().
sdei_init() will be called by arch_initcall and will only initialize
the platform driver, while acpi_sdei_init() will initialize the
device from acpi_ghes_init() when ACPI is ready. This allows the
initialization of SDEI without ACPI_APEI_GHES enabled.
Fixes: dc4e8c07e9e2 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()")
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250507045757.2658795-1-quic_hyiwei@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue Jun 3 17:57:27 2025 -0400
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
[ Upstream commit d8cc0362f918d020ca1340d7694f07062dc30f36 ]
9ffb14ef61ba "move_mount: allow to add a mount into an existing group"
breaks assertions on ->mnt_share/->mnt_slave. For once, the data structures
in question are actually documented.
Documentation/filesystem/sharedsubtree.rst:
All vfsmounts in a peer group have the same ->mnt_master. If it is
non-NULL, they form a contiguous (ordered) segment of slave list.
do_set_group() puts a mount into the same place in propagation graph
as the old one. As the result, if old mount gets events from somewhere
and is not a pure event sink, new one needs to be placed next to the
old one in the slave list the old one's on. If it is a pure event
sink, we only need to make sure the new one doesn't end up in the
middle of some peer group.
"move_mount: allow to add a mount into an existing group" ends up putting
the new one in the beginning of list; that's definitely not going to be
in the middle of anything, so that's fine for case when old is not marked
shared. In case when old one _is_ marked shared (i.e. is not a pure event
sink), that breaks the assumptions of propagation graph iterators.
Put the new mount next to the old one on the list - that does the right thing
in "old is marked shared" case and is just as correct as the current behaviour
if old is not marked shared (kudos to Pavel for pointing that out - my original
suggested fix changed behaviour in the "nor marked" case, which complicated
things for no good reason).
Reviewed-by: Christian Brauner <brauner@kernel.org>
Fixes: 9ffb14ef61ba ("move_mount: allow to add a mount into an existing group")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qasim Ijaz <qasdev00@gmail.com>
Date: Tue Apr 22 16:37:37 2025 +0100
fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt()
[ Upstream commit 6ebf1982038af12f3588417e4fd0417d2551da28 ]
fpga_mgr_test_img_load_sgt() allocates memory for sgt using
kunit_kzalloc() however it does not check if the allocation failed.
It then passes sgt to sg_alloc_table(), which passes it to
__sg_alloc_table(). This function calls memset() on sgt in an attempt to
zero it out. If the allocation fails then sgt will be NULL and the
memset will trigger a NULL pointer dereference.
Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL().
Reviewed-by: Marco Pagani <marco.pagani@linux.dev>
Fixes: ccbc1c302115 ("fpga: add an initial KUnit suite for the FPGA Manager")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20250422153737.5264-1-qasdev00@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zijun Hu <quic_zijuhu@quicinc.com>
Date: Thu Apr 10 19:45:27 2025 +0800
fs/filesystems: Fix potential unsigned integer underflow in fs_name()
[ Upstream commit 1363c134ade81e425873b410566e957fecebb261 ]
fs_name() has @index as unsigned int, so there is underflow risk for
operation '@index--'.
Fix by breaking the for loop when '@index == 0' which is also more proper
than '@index <= 0' for unsigned integer comparison.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/20250410-fix_fs-v1-1-7c14ccc8ebaa@quicinc.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrey Vatoropin <a.vatoropin@crpt.ru>
Date: Tue Mar 18 13:42:18 2025 +0000
fs/ntfs3: handle hdr_first_de() return value
[ Upstream commit af5cab0e5b6f8edb0be51a9f47f3f620e0b4fd70 ]
The hdr_first_de() function returns a pointer to a struct NTFS_DE. This
pointer may be NULL. To handle the NULL error effectively, it is important
to implement an error handler. This will help manage potential errors
consistently.
Additionally, error handling for the return value already exists at other
points where this function is called.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andreas Gruenbacher <agruenba@redhat.com>
Date: Fri Apr 18 16:40:58 2025 +0200
gfs2: gfs2_create_inode error handling fix
[ Upstream commit af4044fd0b77e915736527dd83011e46e6415f01 ]
When gfs2_create_inode() finds a directory, make sure to return -EISDIR.
Fixes: 571a4b57975a ("GFS2: bugger off early if O_CREAT open finds a directory")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alok Tiwari <alok.a.tiwari@oracle.com>
Date: Mon Jun 2 03:34:29 2025 -0700
gve: add missing NULL check for gve_alloc_pending_packet() in TX DQO
[ Upstream commit 12c331b29c7397ac3b03584e12902990693bc248 ]
gve_alloc_pending_packet() can return NULL, but gve_tx_add_skb_dqo()
did not check for this case before dereferencing the returned pointer.
Add a missing NULL check to prevent a potential NULL pointer
dereference when allocation fails.
This improves robustness in low-memory scenarios.
Fixes: a57e5de476be ("gve: DQO: Add TX path")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alok Tiwari <alok.a.tiwari@oracle.com>
Date: Tue May 27 06:08:16 2025 -0700
gve: Fix RX_BUFFERS_POSTED stat to report per-queue fill_cnt
[ Upstream commit f41a94aade120dc60322865f363cee7865f2df01 ]
Previously, the RX_BUFFERS_POSTED stat incorrectly reported the
fill_cnt from RX queue 0 for all queues, resulting in inaccurate
per-queue statistics.
Fix this by correctly indexing priv->rx[idx].fill_cnt for each RX queue.
Fixes: 24aeb56f2d38 ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250527130830.1812903-1-alok.a.tiwari@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Terry Junge <linuxhid@cosmicgizmosystems.com>
Date: Wed Mar 12 15:23:31 2025 -0700
HID: usbhid: Eliminate recurrent out-of-bounds bug in usbhid_parse()
commit fe7f7ac8e0c708446ff017453add769ffc15deed upstream.
Update struct hid_descriptor to better reflect the mandatory and
optional parts of the HID Descriptor as per USB HID 1.11 specification.
Note: the kernel currently does not parse any optional HID class
descriptors, only the mandatory report descriptor.
Update all references to member element desc[0] to rpt_desc.
Add test to verify bLength and bNumDescriptors values are valid.
Replace the for loop with direct access to the mandatory HID class
descriptor member for the report descriptor. This eliminates the
possibility of getting an out-of-bounds fault.
Add a warning message if the HID descriptor contains any unsupported
optional HID class descriptors.
Reported-by: syzbot+c52569baf0c843f35495@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c52569baf0c843f35495
Fixes: f043bfc98c19 ("HID: usbhid: fix out-of-bounds bug")
Cc: stable@vger.kernel.org
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Longfang Liu <liulongfang@huawei.com>
Date: Sat May 10 16:11:51 2025 +0800
hisi_acc_vfio_pci: add eq and aeq interruption restore
[ Upstream commit 3495cec0787721ba7a9d5c19d0bbb66d182de584 ]
In order to ensure that the task packets of the accelerator
device are not lost during the migration process, it is necessary
to send an EQ and AEQ command to the device after the live migration
is completed and to update the completion position of the task queue.
Let the device recheck the completed tasks data and if there are
uncollected packets, device resend a task completion interrupt
to the software.
Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250510081155.55840-3-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Longfang Liu <liulongfang@huawei.com>
Date: Sat May 10 16:11:54 2025 +0800
hisi_acc_vfio_pci: bugfix live migration function without VF device driver
[ Upstream commit 2777a40998deb36f96b6afc48bd397cf58a4edf0 ]
If the VF device driver is not loaded in the Guest OS and we attempt to
perform device data migration, the address of the migrated data will
be NULL.
The live migration recovery operation on the destination side will
access a null address value, which will cause access errors.
Therefore, live migration of VMs without added VF device drivers
does not require device data migration.
In addition, when the queue address data obtained by the destination
is empty, device queue recovery processing will not be performed.
Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250510081155.55840-6-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Longfang Liu <liulongfang@huawei.com>
Date: Sat May 10 16:11:50 2025 +0800
hisi_acc_vfio_pci: fix XQE dma address error
[ Upstream commit 8bb7170c5a055ea17c6857c256ee73c10ff872eb ]
The dma addresses of EQE and AEQE are wrong after migration and
results in guest kernel-mode encryption services failure.
Comparing the definition of hardware registers, we found that
there was an error when the data read from the register was
combined into an address. Therefore, the address combination
sequence needs to be corrected.
Even after fixing the above problem, we still have an issue
where the Guest from an old kernel can get migrated to
new kernel and may result in wrong data.
In order to ensure that the address is correct after migration,
if an old magic number is detected, the dma address needs to be
updated.
Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250510081155.55840-2-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexei Safin <a.safin@rosa.ru>
Date: Thu Apr 24 23:26:54 2025 +0300
hwmon: (asus-ec-sensors) check sensor index in read_string()
[ Upstream commit 25be318324563c63cbd9cb53186203a08d2f83a1 ]
Prevent a potential invalid memory access when the requested sensor
is not found.
find_ec_sensor_index() may return a negative value (e.g. -ENOENT),
but its result was used without checking, which could lead to
undefined behavior when passed to get_sensor_info().
Add a proper check to return -EINVAL if sensor_index is negative.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d0ddfd241e57 ("hwmon: (asus-ec-sensors) add driver for ASUS EC")
Signed-off-by: Alexei Safin <a.safin@rosa.ru>
Link: https://lore.kernel.org/r/20250424202654.5902-1-a.safin@rosa.ru
[groeck: Return error code returned from find_ec_sensor_index]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Robert Malz <robert.malz@canonical.com>
Date: Tue May 20 10:31:52 2025 +0200
i40e: retry VFLR handling if there is ongoing VF reset
[ Upstream commit fb4e9239e029954a37a00818b21e837cebf2aa10 ]
When a VFLR interrupt is received during a VF reset initiated from a
different source, the VFLR may be not fully handled. This can
leave the VF in an undefined state.
To address this, set the I40E_VFLR_EVENT_PENDING bit again during VFLR
handling if the reset is not yet complete. This ensures the driver
will properly complete the VF reset in such scenarios.
Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF")
Signed-off-by: Robert Malz <robert.malz@canonical.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Robert Malz <robert.malz@canonical.com>
Date: Tue May 20 10:31:51 2025 +0200
i40e: return false from i40e_reset_vf if reset is in progress
[ Upstream commit a2c90d63b71223d69a813333c1abf4fdacddbbe5 ]
The function i40e_vc_reset_vf attempts, up to 20 times, to handle a
VF reset request, using the return value of i40e_reset_vf as an indicator
of whether the reset was successfully triggered. Currently, i40e_reset_vf
always returns true, which causes new reset requests to be ignored if a
different VF reset is already in progress.
This patch updates the return value of i40e_reset_vf to reflect when
another VF reset is in progress, allowing the caller to properly use
the retry mechanism.
Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF")
Signed-off-by: Robert Malz <robert.malz@canonical.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jacob Moroni <jmoroni@google.com>
Date: Thu Feb 20 17:56:12 2025 +0000
IB/cm: use rwlock for MAD agent lock
[ Upstream commit 4dab26bed543584577b64b36aadb8b5b165bf44f ]
In workloads where there are many processes establishing connections using
RDMA CM in parallel (large scale MPI), there can be heavy contention for
mad_agent_lock in cm_alloc_msg.
This contention can occur while inside of a spin_lock_irq region, leading
to interrupts being disabled for extended durations on many
cores. Furthermore, it leads to the serialization of rdma_create_ah calls,
which has negative performance impacts for NICs which are capable of
processing multiple address handle creations in parallel.
The end result is the machine becoming unresponsive, hung task warnings,
netdev TX timeouts, etc.
Since the lock appears to be only for protection from cm_remove_one, it
can be changed to a rwlock to resolve these issues.
Reproducer:
Server:
for i in $(seq 1 512); do
ucmatose -c 32 -p $((i + 5000)) &
done
Client:
for i in $(seq 1 512); do
ucmatose -c 32 -p $((i + 5000)) -s 10.2.0.52 &
done
Fixes: 76039ac9095f ("IB/cm: Protect cm_dev, cm_ports and mad_agent with kref and lock")
Link: https://patch.msgid.link/r/20250220175612.2763122-1-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Kubiak <michal.kubiak@intel.com>
Date: Tue May 13 12:55:28 2025 +0200
ice: create new Tx scheduler nodes for new queues only
[ Upstream commit 6fa2942578472c9cab13a8fc1dae0d830193e0a1 ]
The current implementation of the Tx scheduler tree attempts
to create nodes for all Tx queues, ignoring the fact that some
queues may already exist in the tree. For example, if the VSI
already has 128 Tx queues and the user requests for 16 new queues,
the Tx scheduler will compute the tree for 272 queues (128 existing
queues + 144 new queues), instead of 144 queues (128 existing queues
and 16 new queues).
Fix that by modifying the node count calculation algorithm to skip
the queues that already exist in the tree.
Fixes: 5513b920a4f7 ("ice: Update Tx scheduler tree for VSI multi-Tx queue support")
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Kubiak <michal.kubiak@intel.com>
Date: Tue May 13 12:55:29 2025 +0200
ice: fix rebuilding the Tx scheduler tree for large queue counts
[ Upstream commit 73145e6d81070d34a21431c9e0d7aaf2f29ca048 ]
The current implementation of the Tx scheduler allows the tree to be
rebuilt as the user adds more Tx queues to the VSI. In such a case,
additional child nodes are added to the tree to support the new number
of queues.
Unfortunately, this algorithm does not take into account that the limit
of the VSI support node may be exceeded, so an additional node in the
VSI layer may be required to handle all the requested queues.
Such a scenario occurs when adding XDP Tx queues on machines with many
CPUs. Although the driver still respects the queue limit returned by
the FW, the Tx scheduler was unable to add those queues to its tree
and returned one of the errors below.
Such a scenario occurs when adding XDP Tx queues on machines with many
CPUs (e.g. at least 321 CPUs, if there is already 128 Tx/Rx queue pairs).
Although the driver still respects the queue limit returned by the FW,
the Tx scheduler was unable to add those queues to its tree and returned
the following errors:
Failed VSI LAN queue config for XDP, error: -5
or:
Failed to set LAN Tx queue context, error: -22
Fix this problem by extending the tree rebuild algorithm to check if the
current VSI node can support the requested number of queues. If it
cannot, create as many additional VSI support nodes as necessary to
handle all the required Tx queues. Symmetrically, adjust the VSI node
removal algorithm to remove all nodes associated with the given VSI.
Also, make the search for the next free VSI node more restrictive. That is,
add queue group nodes only to the VSI support nodes that have a matching
VSI handle.
Finally, fix the comment describing the tree update algorithm to better
reflect the current scenario.
Fixes: b0153fdd7e8a ("ice: update VSI config dynamically")
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Kubiak <michal.kubiak@intel.com>
Date: Tue May 13 12:55:27 2025 +0200
ice: fix Tx scheduler error handling in XDP callback
[ Upstream commit 0153f36041b8e52019ebfa8629c13bf8f9b0a951 ]
When the XDP program is loaded, the XDP callback adds new Tx queues.
This means that the callback must update the Tx scheduler with the new
queue number. In the event of a Tx scheduler failure, the XDP callback
should also fail and roll back any changes previously made for XDP
preparation.
The previous implementation had a bug that not all changes made by the
XDP callback were rolled back. This caused the crash with the following
call trace:
[ +9.549584] ice 0000:ca:00.0: Failed VSI LAN queue config for XDP, error: -5
[ +0.382335] Oops: general protection fault, probably for non-canonical address 0x50a2250a90495525: 0000 [#1] SMP NOPTI
[ +0.010710] CPU: 103 UID: 0 PID: 0 Comm: swapper/103 Not tainted 6.14.0-net-next-mar-31+ #14 PREEMPT(voluntary)
[ +0.010175] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022
[ +0.010946] RIP: 0010:__ice_update_sample+0x39/0xe0 [ice]
[...]
[ +0.002715] Call Trace:
[ +0.002452] <IRQ>
[ +0.002021] ? __die_body.cold+0x19/0x29
[ +0.003922] ? die_addr+0x3c/0x60
[ +0.003319] ? exc_general_protection+0x17c/0x400
[ +0.004707] ? asm_exc_general_protection+0x26/0x30
[ +0.004879] ? __ice_update_sample+0x39/0xe0 [ice]
[ +0.004835] ice_napi_poll+0x665/0x680 [ice]
[ +0.004320] __napi_poll+0x28/0x190
[ +0.003500] net_rx_action+0x198/0x360
[ +0.003752] ? update_rq_clock+0x39/0x220
[ +0.004013] handle_softirqs+0xf1/0x340
[ +0.003840] ? sched_clock_cpu+0xf/0x1f0
[ +0.003925] __irq_exit_rcu+0xc2/0xe0
[ +0.003665] common_interrupt+0x85/0xa0
[ +0.003839] </IRQ>
[ +0.002098] <TASK>
[ +0.002106] asm_common_interrupt+0x26/0x40
[ +0.004184] RIP: 0010:cpuidle_enter_state+0xd3/0x690
Fix this by performing the missing unmapping of XDP queues from
q_vectors and setting the XDP rings pointer back to NULL after all those
queues are released.
Also, add an immediate exit from the XDP callback in case of ring
preparation failure.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Date: Mon Mar 17 12:52:47 2025 +0100
iio: adc: ad7124: Fix 3dB filter frequency reading
[ Upstream commit 8712e4986e7ce42a14c762c4c350f290989986a5 ]
The sinc4 filter has a factor 0.23 between Output Data Rate and f_{3dB}
and for sinc3 the factor is 0.272 according to the data sheets for
ad7124-4 (Rev. E.) and ad7124-8 (Rev. F).
Fixes: cef2760954cf ("iio: adc: ad7124: add 3db filter")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/20250317115247.3735016-6-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sam Winchenbach <swinchenbach@arka.org>
Date: Fri Mar 28 13:48:27 2025 -0400
iio: filter: admv8818: fix band 4, state 15
[ Upstream commit ef0ce24f590ac075d5eda11f2d6434b303333ed6 ]
Corrects the upper range of LPF Band 4 from 18.5 GHz to 18.85 GHz per
the ADMV8818 datasheet
Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-3-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sam Winchenbach <swinchenbach@arka.org>
Date: Fri Mar 28 13:48:28 2025 -0400
iio: filter: admv8818: fix integer overflow
[ Upstream commit fb6009a28d77edec4eb548b5875dae8c79b88467 ]
HZ_PER_MHZ is only unsigned long. This math overflows, leading to
incorrect results.
Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-4-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sam Winchenbach <swinchenbach@arka.org>
Date: Fri Mar 28 13:48:29 2025 -0400
iio: filter: admv8818: fix range calculation
[ Upstream commit d542db7095d322bfcdc8e306db6f8c48358c9619 ]
Search for the minimum error while ensuring that the LPF corner
frequency is greater than the target, and the HPF corner frequency
is lower than the target
This fixes issues where the range calculations were suboptimal.
Add two new DTS properties to set the margin between the input frequency
and the calculated corner frequency
Below is a generated table of the differences between the old algorithm
and the new. This is a sweep from 0 to 20 GHz in 10 MHz steps.
=== HPF ===
freq = 1750 MHz, 3db: bypass => 1750 MHz
freq = 3400 MHz, 3db: 3310 => 3400 MHz
freq = 3410 MHz, 3db: 3310 => 3400 MHz
freq = 3420 MHz, 3db: 3310 => 3400 MHz
freq = 3660 MHz, 3db: 3550 => 3656 MHz
freq = 6600 MHz, 3db: 6479 => 6600 MHz
freq = 6610 MHz, 3db: 6479 => 6600 MHz
freq = 6620 MHz, 3db: 6479 => 6600 MHz
freq = 6630 MHz, 3db: 6479 => 6600 MHz
freq = 6640 MHz, 3db: 6479 => 6600 MHz
freq = 6650 MHz, 3db: 6479 => 6600 MHz
freq = 6660 MHz, 3db: 6479 => 6600 MHz
freq = 6670 MHz, 3db: 6479 => 6600 MHz
freq = 6680 MHz, 3db: 6479 => 6600 MHz
freq = 6690 MHz, 3db: 6479 => 6600 MHz
freq = 6700 MHz, 3db: 6479 => 6600 MHz
freq = 6710 MHz, 3db: 6479 => 6600 MHz
freq = 6720 MHz, 3db: 6479 => 6600 MHz
freq = 6730 MHz, 3db: 6479 => 6600 MHz
freq = 6960 MHz, 3db: 6736 => 6960 MHz
freq = 6970 MHz, 3db: 6736 => 6960 MHz
freq = 6980 MHz, 3db: 6736 => 6960 MHz
freq = 6990 MHz, 3db: 6736 => 6960 MHz
freq = 7320 MHz, 3db: 7249 => 7320 MHz
freq = 7330 MHz, 3db: 7249 => 7320 MHz
freq = 7340 MHz, 3db: 7249 => 7320 MHz
freq = 7350 MHz, 3db: 7249 => 7320 MHz
freq = 7360 MHz, 3db: 7249 => 7320 MHz
freq = 7370 MHz, 3db: 7249 => 7320 MHz
freq = 7380 MHz, 3db: 7249 => 7320 MHz
freq = 7390 MHz, 3db: 7249 => 7320 MHz
freq = 7400 MHz, 3db: 7249 => 7320 MHz
freq = 7410 MHz, 3db: 7249 => 7320 MHz
freq = 7420 MHz, 3db: 7249 => 7320 MHz
freq = 7430 MHz, 3db: 7249 => 7320 MHz
freq = 7440 MHz, 3db: 7249 => 7320 MHz
freq = 7450 MHz, 3db: 7249 => 7320 MHz
freq = 7460 MHz, 3db: 7249 => 7320 MHz
freq = 7470 MHz, 3db: 7249 => 7320 MHz
freq = 7480 MHz, 3db: 7249 => 7320 MHz
freq = 7490 MHz, 3db: 7249 => 7320 MHz
freq = 7500 MHz, 3db: 7249 => 7320 MHz
freq = 12500 MHz, 3db: 12000 => 12500 MHz
=== LPF ===
freq = 2050 MHz, 3db: bypass => 2050 MHz
freq = 2170 MHz, 3db: 2290 => 2170 MHz
freq = 2290 MHz, 3db: 2410 => 2290 MHz
freq = 2410 MHz, 3db: 2530 => 2410 MHz
freq = 2530 MHz, 3db: 2650 => 2530 MHz
freq = 2650 MHz, 3db: 2770 => 2650 MHz
freq = 2770 MHz, 3db: 2890 => 2770 MHz
freq = 2890 MHz, 3db: 3010 => 2890 MHz
freq = 3010 MHz, 3db: 3130 => 3010 MHz
freq = 3130 MHz, 3db: 3250 => 3130 MHz
freq = 3250 MHz, 3db: 3370 => 3250 MHz
freq = 3260 MHz, 3db: 3370 => 3350 MHz
freq = 3270 MHz, 3db: 3370 => 3350 MHz
freq = 3280 MHz, 3db: 3370 => 3350 MHz
freq = 3290 MHz, 3db: 3370 => 3350 MHz
freq = 3300 MHz, 3db: 3370 => 3350 MHz
freq = 3310 MHz, 3db: 3370 => 3350 MHz
freq = 3320 MHz, 3db: 3370 => 3350 MHz
freq = 3330 MHz, 3db: 3370 => 3350 MHz
freq = 3340 MHz, 3db: 3370 => 3350 MHz
freq = 3350 MHz, 3db: 3370 => 3350 MHz
freq = 3370 MHz, 3db: 3490 => 3370 MHz
freq = 3490 MHz, 3db: 3610 => 3490 MHz
freq = 3610 MHz, 3db: 3730 => 3610 MHz
freq = 3730 MHz, 3db: 3850 => 3730 MHz
freq = 3850 MHz, 3db: 3870 => 3850 MHz
freq = 3870 MHz, 3db: 4130 => 3870 MHz
freq = 4130 MHz, 3db: 4390 => 4130 MHz
freq = 4390 MHz, 3db: 4650 => 4390 MHz
freq = 4650 MHz, 3db: 4910 => 4650 MHz
freq = 4910 MHz, 3db: 5170 => 4910 MHz
freq = 5170 MHz, 3db: 5430 => 5170 MHz
freq = 5430 MHz, 3db: 5690 => 5430 MHz
freq = 5690 MHz, 3db: 5950 => 5690 MHz
freq = 5950 MHz, 3db: 6210 => 5950 MHz
freq = 6210 MHz, 3db: 6470 => 6210 MHz
freq = 6470 MHz, 3db: 6730 => 6470 MHz
freq = 6730 MHz, 3db: 6990 => 6730 MHz
freq = 6990 MHz, 3db: 7250 => 6990 MHz
freq = 7000 MHz, 3db: 7250 => 7000 MHz
freq = 7250 MHz, 3db: 7400 => 7250 MHz
freq = 7400 MHz, 3db: 7800 => 7400 MHz
freq = 7800 MHz, 3db: 8200 => 7800 MHz
freq = 8200 MHz, 3db: 8600 => 8200 MHz
freq = 8600 MHz, 3db: 9000 => 8600 MHz
freq = 9000 MHz, 3db: 9400 => 9000 MHz
freq = 9400 MHz, 3db: 9800 => 9400 MHz
freq = 9800 MHz, 3db: 10200 => 9800 MHz
freq = 10200 MHz, 3db: 10600 => 10200 MHz
freq = 10600 MHz, 3db: 11000 => 10600 MHz
freq = 11000 MHz, 3db: 11400 => 11000 MHz
freq = 11400 MHz, 3db: 11800 => 11400 MHz
freq = 11800 MHz, 3db: 12200 => 11800 MHz
freq = 12200 MHz, 3db: 12600 => 12200 MHz
freq = 12210 MHz, 3db: 12600 => 12550 MHz
freq = 12220 MHz, 3db: 12600 => 12550 MHz
freq = 12230 MHz, 3db: 12600 => 12550 MHz
freq = 12240 MHz, 3db: 12600 => 12550 MHz
freq = 12250 MHz, 3db: 12600 => 12550 MHz
freq = 12260 MHz, 3db: 12600 => 12550 MHz
freq = 12270 MHz, 3db: 12600 => 12550 MHz
freq = 12280 MHz, 3db: 12600 => 12550 MHz
freq = 12290 MHz, 3db: 12600 => 12550 MHz
freq = 12300 MHz, 3db: 12600 => 12550 MHz
freq = 12310 MHz, 3db: 12600 => 12550 MHz
freq = 12320 MHz, 3db: 12600 => 12550 MHz
freq = 12330 MHz, 3db: 12600 => 12550 MHz
freq = 12340 MHz, 3db: 12600 => 12550 MHz
freq = 12350 MHz, 3db: 12600 => 12550 MHz
freq = 12360 MHz, 3db: 12600 => 12550 MHz
freq = 12370 MHz, 3db: 12600 => 12550 MHz
freq = 12380 MHz, 3db: 12600 => 12550 MHz
freq = 12390 MHz, 3db: 12600 => 12550 MHz
freq = 12400 MHz, 3db: 12600 => 12550 MHz
freq = 12410 MHz, 3db: 12600 => 12550 MHz
freq = 12420 MHz, 3db: 12600 => 12550 MHz
freq = 12430 MHz, 3db: 12600 => 12550 MHz
freq = 12440 MHz, 3db: 12600 => 12550 MHz
freq = 12450 MHz, 3db: 12600 => 12550 MHz
freq = 12460 MHz, 3db: 12600 => 12550 MHz
freq = 12470 MHz, 3db: 12600 => 12550 MHz
freq = 12480 MHz, 3db: 12600 => 12550 MHz
freq = 12490 MHz, 3db: 12600 => 12550 MHz
freq = 12500 MHz, 3db: 12600 => 12550 MHz
freq = 12510 MHz, 3db: 12600 => 12550 MHz
freq = 12520 MHz, 3db: 12600 => 12550 MHz
freq = 12530 MHz, 3db: 12600 => 12550 MHz
freq = 12540 MHz, 3db: 12600 => 12550 MHz
freq = 12550 MHz, 3db: 12600 => 12550 MHz
freq = 12600 MHz, 3db: 13000 => 12600 MHz
freq = 12610 MHz, 3db: 13000 => 12970 MHz
freq = 12620 MHz, 3db: 13000 => 12970 MHz
freq = 12630 MHz, 3db: 13000 => 12970 MHz
freq = 12640 MHz, 3db: 13000 => 12970 MHz
freq = 12650 MHz, 3db: 13000 => 12970 MHz
freq = 12660 MHz, 3db: 13000 => 12970 MHz
freq = 12670 MHz, 3db: 13000 => 12970 MHz
freq = 12680 MHz, 3db: 13000 => 12970 MHz
freq = 12690 MHz, 3db: 13000 => 12970 MHz
freq = 12700 MHz, 3db: 13000 => 12970 MHz
freq = 12710 MHz, 3db: 13000 => 12970 MHz
freq = 12720 MHz, 3db: 13000 => 12970 MHz
freq = 12730 MHz, 3db: 13000 => 12970 MHz
freq = 12740 MHz, 3db: 13000 => 12970 MHz
freq = 12750 MHz, 3db: 13000 => 12970 MHz
freq = 12760 MHz, 3db: 13000 => 12970 MHz
freq = 12770 MHz, 3db: 13000 => 12970 MHz
freq = 12780 MHz, 3db: 13000 => 12970 MHz
freq = 12790 MHz, 3db: 13000 => 12970 MHz
freq = 12800 MHz, 3db: 13000 => 12970 MHz
freq = 12810 MHz, 3db: 13000 => 12970 MHz
freq = 12820 MHz, 3db: 13000 => 12970 MHz
freq = 12830 MHz, 3db: 13000 => 12970 MHz
freq = 12840 MHz, 3db: 13000 => 12970 MHz
freq = 12850 MHz, 3db: 13000 => 12970 MHz
freq = 12860 MHz, 3db: 13000 => 12970 MHz
freq = 12870 MHz, 3db: 13000 => 12970 MHz
freq = 12880 MHz, 3db: 13000 => 12970 MHz
freq = 12890 MHz, 3db: 13000 => 12970 MHz
freq = 12900 MHz, 3db: 13000 => 12970 MHz
freq = 12910 MHz, 3db: 13000 => 12970 MHz
freq = 12920 MHz, 3db: 13000 => 12970 MHz
freq = 12930 MHz, 3db: 13000 => 12970 MHz
freq = 12940 MHz, 3db: 13000 => 12970 MHz
freq = 12950 MHz, 3db: 13000 => 12970 MHz
freq = 12960 MHz, 3db: 13000 => 12970 MHz
freq = 12970 MHz, 3db: 13000 => 12970 MHz
freq = 13000 MHz, 3db: 13390 => 13000 MHz
freq = 13390 MHz, 3db: 13810 => 13390 MHz
freq = 13810 MHz, 3db: 14230 => 13810 MHz
freq = 14230 MHz, 3db: 14650 => 14230 MHz
freq = 14650 MHz, 3db: 15070 => 14650 MHz
freq = 15070 MHz, 3db: 15490 => 15070 MHz
freq = 15490 MHz, 3db: 15910 => 15490 MHz
freq = 15910 MHz, 3db: 16330 => 15910 MHz
freq = 16330 MHz, 3db: 16750 => 16330 MHz
freq = 16750 MHz, 3db: 17170 => 16750 MHz
freq = 17170 MHz, 3db: 17590 => 17170 MHz
freq = 17590 MHz, 3db: 18010 => 17590 MHz
freq = 18010 MHz, 3db: 18430 => 18010 MHz
freq = 18430 MHz, 3db: 18850 => 18430 MHz
freq = 18850 MHz, 3db: bypass => 18850 MHz
Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-5-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Brian Pellegrino <bpellegrino@arka.org>
Date: Fri Mar 28 13:48:31 2025 -0400
iio: filter: admv8818: Support frequencies >= 2^32
[ Upstream commit 9016776f1301627de78a633bda7c898425a56572 ]
This patch allows writing u64 values to the ADMV8818's high and low-pass
filter frequencies. It includes the following changes:
- Rejects negative frequencies in admv8818_write_raw.
- Adds a write_raw_get_fmt function to admv8818's iio_info, returning
IIO_VAL_INT_64 for the high and low-pass filter 3dB frequency channels.
Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Brian Pellegrino <bpellegrino@arka.org>
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-7-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Mon May 5 15:49:59 2025 -0700
Input: synaptics-rmi - fix crash with unsupported versions of F34
[ Upstream commit ca39500f6af9cfe6823dc5aa8fbaed788d6e35b2 ]
Sysfs interface for updating firmware for RMI devices is available even
when F34 probe fails. The code checks for presence of F34 "container"
pointer and then tries to use the function data attached to the
sub-device. F34 assigns the function data early, before it knows if
probe will succeed, leaving behind a stale pointer.
Fix this by expanding checks to not only test for presence of F34
"container" but also check if there is driver data assigned to the
sub-device, and call dev_set_drvdata() only after we are certain that
probe is successful.
This is not a complete fix, since F34 will be freed during firmware
update, so there is still a race when fetching and accessing this
pointer. This race will be addressed in follow-up changes.
Reported-by: Hanno Böck <hanno@hboeck.de>
Fixes: 29fd0ec2bdbe ("Input: synaptics-rmi4 - add support for F34 device reflash")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBlAl6sGulam-Qcx@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Sun Oct 6 10:40:36 2024 -0600
io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT
Commit f7c9134385331c5ef36252895130aa01a92de907 upstream.
The checking for whether or not io_uring can do a non-blocking read or
write attempt is gated on FMODE_NOWAIT. However, if the file is
pollable, it's feasible to just check if it's currently in a state in
which it can sanely receive or send _some_ data.
This avoids unnecessary io-wq punts, and repeated worthless retries
before doing that punt, by assuming that some data can get delivered
or received if poll tells us that is true. It also allows multishot
reads to properly work with these types of files, enabling a bit of
a cleanup of the logic that:
c9d952b9103b ("io_uring/rw: fix cflags posting for single issue multishot read")
had to put in place.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Sat Oct 19 09:16:51 2024 -0600
io_uring/rw: fix wrong NOWAIT check in io_rw_init_file()
Commit ae6a888a4357131c01d85f4c91fb32552dd0bf70 upstream.
A previous commit improved how !FMODE_NOWAIT is dealt with, but
inadvertently negated a check whilst doing so. This caused -EAGAIN to be
returned from reading files with O_NONBLOCK set. Fix up the check for
REQ_F_SUPPORT_NOWAIT.
Reported-by: Julian Orth <ju.orth@gmail.com>
Link: https://github.com/axboe/liburing/issues/1270
Fixes: f7c913438533 ("io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Sun Jan 28 20:08:24 2024 -0700
io_uring: add io_file_can_poll() helper
Commit 95041b93e90a06bb613ec4bef9cd4d61570f68e4 upstream.
This adds a flag to avoid dipping dereferencing file and then f_op to
figure out if the file has a poll handler defined or not. We generally
call this at least twice for networked workloads, and if using ring
provided buffers, we do it on every buffer selection. Particularly the
latter is troublesome, as it's otherwise a very fast operation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jason Gunthorpe <jgg@ziepe.ca>
Date: Fri Apr 25 10:08:37 2025 -0300
iommu: Protect against overflow in iommu_pgsize()
[ Upstream commit e586e22974d2b7acbef3c6c3e01b2d5ce69efe33 ]
On a 32 bit system calling:
iommu_map(0, 0x40000000)
When using the AMD V1 page table type with a domain->pgsize of 0xfffff000
causes iommu_pgsize() to miscalculate a result of:
size=0x40000000 count=2
count should be 1. This completely corrupts the mapping process.
This is because the final test to adjust the pagesize malfunctions when
the addition overflows. Use check_add_overflow() to prevent this.
Fixes: b1d99dc5f983 ("iommu: Hook up '->unmap_pages' driver callback")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-3ad28fc2e3a3+163327-iommu_overflow_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rolf Eike Beer <eb@emlix.com>
Date: Mon May 12 15:10:44 2025 +0200
iommu: remove duplicate selection of DMAR_TABLE
[ Upstream commit 9548feff840a05d61783e6316d08ed37e115f3b1 ]
This is already done in intel/Kconfig.
Fixes: 70bad345e622 ("iommu: Fix compilation without CONFIG_IOMMU_INTEL")
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/2232605.Mh6RI2rZIc@devpool92.emlix.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrey Konovalov <andreyknvl@gmail.com>
Date: Fri Oct 6 17:18:44 2023 +0200
kasan: use unchecked __memset internally
[ Upstream commit 01a5ad81637672940844052404678678a0ec8854 ]
KASAN code is supposed to use the unchecked __memset implementation when
accessing its metadata.
Change uses of memset to __memset in mm/kasan/.
Link: https://lkml.kernel.org/r/6f621966c6f52241b5aaa7220c348be90c075371.1696605143.git.andreyknvl@google.com
Fixes: 59e6e098d1c1 ("kasan: introduce kasan_complete_mode_report_info")
Fixes: 3c5c3cfb9ef4 ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: b6ea95a34cbd ("kasan: avoid sleepable page allocation from atomic context")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nathan Chancellor <nathan@kernel.org>
Date: Tue May 6 14:02:01 2025 -0700
kbuild: Disable -Wdefault-const-init-unsafe
commit d0afcfeb9e3810ec89d1ffde1a0e36621bb75dca upstream.
A new on by default warning in clang [1] aims to flags instances where
const variables without static or thread local storage or const members
in aggregate types are not initialized because it can lead to an
indeterminate value. This is quite noisy for the kernel due to
instances originating from header files such as:
drivers/gpu/drm/i915/gt/intel_ring.h:62:2: error: default initialization of an object of type 'typeof (ring->size)' (aka 'const unsigned int') leaves the object uninitialized [-Werror,-Wdefault-const-init-var-unsafe]
62 | typecheck(typeof(ring->size), next);
| ^
include/linux/typecheck.h:10:9: note: expanded from macro 'typecheck'
10 | ({ type __dummy; \
| ^
include/net/ip.h:478:14: error: default initialization of an object of type 'typeof (rt->dst.expires)' (aka 'const unsigned long') leaves the object uninitialized [-Werror,-Wdefault-const-init-var-unsafe]
478 | if (mtu && time_before(jiffies, rt->dst.expires))
| ^
include/linux/jiffies.h:138:26: note: expanded from macro 'time_before'
138 | #define time_before(a,b) time_after(b,a)
| ^
include/linux/jiffies.h:128:3: note: expanded from macro 'time_after'
128 | (typecheck(unsigned long, a) && \
| ^
include/linux/typecheck.h:11:12: note: expanded from macro 'typecheck'
11 | typeof(x) __dummy2; \
| ^
include/linux/list.h:409:27: warning: default initialization of an object of type 'union (unnamed union at include/linux/list.h:409:27)' with const member leaves the object uninitialized [-Wdefault-const-init-field-unsafe]
409 | struct list_head *next = smp_load_acquire(&head->next);
| ^
include/asm-generic/barrier.h:176:29: note: expanded from macro 'smp_load_acquire'
176 | #define smp_load_acquire(p) __smp_load_acquire(p)
| ^
arch/arm64/include/asm/barrier.h:164:59: note: expanded from macro '__smp_load_acquire'
164 | union { __unqual_scalar_typeof(*p) __val; char __c[1]; } __u; \
| ^
include/linux/list.h:409:27: note: member '__val' declared 'const' here
crypto/scatterwalk.c:66:22: error: default initialization of an object of type 'struct scatter_walk' with const member leaves the object uninitialized [-Werror,-Wdefault-const-init-field-unsafe]
66 | struct scatter_walk walk;
| ^
include/crypto/algapi.h:112:15: note: member 'addr' declared 'const' here
112 | void *const addr;
| ^
fs/hugetlbfs/inode.c:733:24: error: default initialization of an object of type 'struct vm_area_struct' with const member leaves the object uninitialized [-Werror,-Wdefault-const-init-field-unsafe]
733 | struct vm_area_struct pseudo_vma;
| ^
include/linux/mm_types.h:803:20: note: member 'vm_flags' declared 'const' here
803 | const vm_flags_t vm_flags;
| ^
Silencing the instances from typecheck.h is difficult because '= {}' is
not available in older but supported compilers and '= {0}' would cause
warnings about a literal 0 being treated as NULL. While it might be
possible to come up with a local hack to silence the warning for
clang-21+, it may not be worth it since -Wuninitialized will still
trigger if an uninitialized const variable is actually used.
In all audited cases of the "field" variant of the warning, the members
are either not used in the particular call path, modified through other
means such as memset() / memcpy() because the containing object is not
const, or are within a union with other non-const members.
Since this warning does not appear to have a high signal to noise ratio,
just disable it.
Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/576161cb6069e2c7656a8ef530727a0f4aefff30 [1]
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/CA+G9fYuNjKcxFKS_MKPRuga32XbndkLGcY-PVuoSwzv6VWbY=w@mail.gmail.com/
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2088
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michal Koutný <mkoutny@suse.com>
Date: Mon May 5 14:12:00 2025 +0200
kernfs: Relax constraint in draining guard
[ Upstream commit 071d8e4c2a3b0999a9b822e2eb8854784a350f8a ]
The active reference lifecycle provides the break/unbreak mechanism but
the active reference is not truly active after unbreak -- callers don't
use it afterwards but it's important for proper pairing of kn->active
counting. Assuming this mechanism is in place, the WARN check in
kernfs_should_drain_open_files() is too sensitive -- it may transiently
catch those (rightful) callers between
kernfs_unbreak_active_protection() and kernfs_put_active() as found out by Chen
Ridong:
kernfs_remove_by_name_ns kernfs_get_active // active=1
__kernfs_remove // active=0x80000002
kernfs_drain ...
wait_event
//waiting (active == 0x80000001)
kernfs_break_active_protection
// active = 0x80000001
// continue
kernfs_unbreak_active_protection
// active = 0x80000002
...
kernfs_should_drain_open_files
// warning occurs
kernfs_put_active
To avoid the false positives (mind panic_on_warn) remove the check altogether.
(This is meant as quick fix, I think active reference break/unbreak may be
simplified with larger rework.)
Fixes: bdb2fd7fc56e1 ("kernfs: Skip kernfs_drain_open_files() more aggressively")
Link: https://lore.kernel.org/r/kmmrseckjctb4gxcx2rdminrjnq2b4ipf7562nvfd432ld5v5m@2byj5eedkb2o/
Cc: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250505121201.879823-1-mkoutny@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiayuan Chen <jiayuan.chen@linux.dev>
Date: Fri Apr 25 13:59:57 2025 +0800
ktls, sockmap: Fix missing uncharge operation
[ Upstream commit 79f0c39ae7d3dc628c01b02f23ca5d01f9875040 ]
When we specify apply_bytes, we divide the msg into multiple segments,
each with a length of 'send', and every time we send this part of the data
using tcp_bpf_sendmsg_redir(), we use sk_msg_return_zero() to uncharge the
memory of the specified 'send' size.
However, if the first segment of data fails to send, for example, the
peer's buffer is full, we need to release all of the msg. When releasing
the msg, we haven't uncharged the memory of the subsequent segments.
This modification does not make significant logical changes, but only
fills in the missing uncharge places.
This issue has existed all along, until it was exposed after we added the
apply test in test_sockmap:
commit 3448ad23b34e ("selftests/bpf: Add apply_bytes test to test_txmsg_redir_wait_sndmem in test_sockmap")
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Closes: https://lore.kernel.org/bpf/aAmIi0vlycHtbXeb@pop-os.localdomain/T/#t
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/20250425060015.6968-2-jiayuan.chen@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tzung-Bi Shih <tzungbi@kernel.org>
Date: Tue May 20 08:20:49 2025 +0000
kunit: Fix wrong parameter to kunit_deactivate_static_stub()
[ Upstream commit 772e50a76ee664e75581624f512df4e45582605a ]
kunit_deactivate_static_stub() accepts real_fn_addr instead of
replacement_addr. In the case, it always passes NULL to
kunit_deactivate_static_stub().
Fix it.
Link: https://lore.kernel.org/r/20250520082050.2254875-1-tzungbi@kernel.org
Fixes: e047c5eaa763 ("kunit: Expose 'static stub' API to redirect functions")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Viktor Malik <vmalik@redhat.com>
Date: Tue Apr 15 17:50:14 2025 +0200
libbpf: Fix buffer overflow in bpf_object__init_prog
[ Upstream commit ee684de5c1b0ac01821320826baec7da93f3615b ]
As shown in [1], it is possible to corrupt a BPF ELF file such that
arbitrary BPF instructions are loaded by libbpf. This can be done by
setting a symbol (BPF program) section offset to a large (unsigned)
number such that <section start + symbol offset> overflows and points
before the section data in the memory.
Consider the situation below where:
- prog_start = sec_start + symbol_offset <-- size_t overflow here
- prog_end = prog_start + prog_size
prog_start sec_start prog_end sec_end
| | | |
v v v v
.....................|################################|............
The report in [1] also provides a corrupted BPF ELF which can be used as
a reproducer:
$ readelf -S crash
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040
0000000000000068 0000000000000000 AX 0 0 8
$ readelf -s crash
Symbol table '.symtab' contains 8 entries:
Num: Value Size Type Bind Vis Ndx Name
...
6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp
Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will
point before the actual memory where section 2 is allocated.
This is also reported by AddressSanitizer:
=================================================================
==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
READ of size 104 at 0x7c7302fe0000 thread T0
#0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
#1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
#2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
#3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
#4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
#5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
#6 0x000000400c16 in main /poc/poc.c:8
#7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
#8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
#9 0x000000400b34 in _start (/poc/poc+0x400b34)
0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
allocated by thread T0 here:
#0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
#1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
#2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
#3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740
The problem here is that currently, libbpf only checks that the program
end is within the section bounds. There used to be a check
`while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was
removed by commit 6245947c1b3c ("libbpf: Allow gaps in BPF program
sections to support overriden weak functions").
Add a check for detecting the overflow of `sec_off + prog_sz` to
bpf_object__init_prog to fix this issue.
[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Fixes: 6245947c1b3c ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Reported-by: lmarch2 <2524158037@qq.com>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Link: https://lore.kernel.org/bpf/20250415155014.397603-1-vmalik@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tao Chen <chen.dylane@linux.dev>
Date: Thu Apr 24 00:39:01 2025 +0800
libbpf: Remove sample_period init in perf_buffer
[ Upstream commit 64821d25f05ac468d435e61669ae745ce5a633ea ]
It seems that sample_period is not used in perf buffer. Actually, only
wakeup_events are meaningful to enable events aggregation for wakeup notification.
Remove sample_period setting code to avoid confusion.
Fixes: fb84b8224655 ("libbpf: add perf buffer API")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/bpf/20250423163901.2983689-1-chen.dylane@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anton Protopopov <a.s.protopopov@gmail.com>
Date: Wed Apr 30 12:08:20 2025 +0000
libbpf: Use proper errno value in linker
[ Upstream commit 358b1c0f56ebb6996fcec7dcdcf6bae5dcbc8b6c ]
Return values of the linker_append_sec_data() and the
linker_append_elf_relos() functions are propagated all the
way up to users of libbpf API. In some error cases these
functions return -1 which will be seen as -EPERM from user's
point of view. Instead, return a more reasonable -EINVAL.
Fixes: faf6ed321cf6 ("libbpf: Add BPF static linker APIs")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250430120820.2262053-1-a.s.protopopov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anton Protopopov <a.s.protopopov@gmail.com>
Date: Sat May 10 18:20:11 2025 +0000
libbpf: Use proper errno value in nlattr
[ Upstream commit fd5fd538a1f4b34cee6823ba0ddda2f7a55aca96 ]
Return value of the validate_nla() function can be propagated all the
way up to users of libbpf API. In case of error this libbpf version
of validate_nla returns -1 which will be seen as -EPERM from user's
point of view. Instead, return a more reasonable -EINVAL.
Fixes: bbf48c18ee0c ("libbpf: add error reporting in XDP")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250510182011.2246631-1-a.s.protopopov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Thu Jun 19 15:28:47 2025 +0200
Linux 6.6.94
Link: https://lore.kernel.org/r/20250617152338.212798615@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Hardik Garg <hargar@linux.microsoft.com>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Finn Thain <fthain@linux-m68k.org>
Date: Thu Apr 24 10:07:26 2025 +1000
m68k: mac: Fix macintosh_config for Mac II
[ Upstream commit 52ae3f5da7e5adbe3d1319573b55dac470abb83c ]
When booted on my Mac II, the kernel prints this:
Detected Macintosh model: 6
Apple Macintosh Unknown
The catch-all entry ("Unknown") is mac_data_table[0] which is only needed
in the unlikely event that the bootinfo model ID can't be matched.
When model ID is 6, the search should begin and end at mac_data_table[1].
Fix the off-by-one error that causes this problem.
Cc: Joshua Thompson <funaho@jurai.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/d0f30a551064ca4810b1c48d5a90954be80634a9.1745453246.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
Date: Mon Jun 9 09:26:26 2025 +0200
macsec: MACsec SCI assignment for ES = 0
[ Upstream commit d9816ec74e6d6aa29219d010bba3f780ba1d9d75 ]
According to 802.1AE standard, when ES and SC flags in TCI are zero,
used SCI should be the current active SC_RX. Current code uses the
header MAC address. Without this patch, when ES flag is 0 (using a
bridge or switch), header MAC will not fit the SCI and MACSec frames
will be discarted.
In order to test this issue, MACsec link should be stablished between
two interfaces, setting SC and ES flags to zero and a port identifier
different than one. For example, using ip macsec tools:
ip link add link $ETH0 macsec0 type macsec port 11 send_sci off
end_station off
ip macsec add macsec0 tx sa 0 pn 2 on key 01 $ETH1_KEY
ip macsec add macsec0 rx port 11 address $ETH1_MAC
ip macsec add macsec0 rx port 11 address $ETH1_MAC sa 0 pn 2 on key 02
ip link set dev macsec0 up
ip link add link $ETH1 macsec1 type macsec port 11 send_sci off
end_station off
ip macsec add macsec1 tx sa 0 pn 2 on key 01 $ETH0_KEY
ip macsec add macsec1 rx port 11 address $ETH0_MAC
ip macsec add macsec1 rx port 11 address $ETH0_MAC sa 0 pn 2 on key 02
ip link set dev macsec1 up
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Co-developed-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jonas Karlman <jonas@kwiboo.se>
Date: Tue Feb 25 10:40:33 2025 +0100
media: rkvdec: Fix frame size enumeration
[ Upstream commit f270005b99fa19fee9a6b4006e8dee37c10f1944 ]
The VIDIOC_ENUM_FRAMESIZES ioctl should return all frame sizes (i.e.
width and height in pixels) that the device supports for the given pixel
format.
It doesn't make a lot of sense to return the frame-sizes in a stepwise
manner, which is used to enforce hardware alignments requirements for
CAPTURE buffers, for coded formats.
Instead, applications should receive an indication, about the maximum
supported frame size for that hardware decoder, via a continuous
frame-size enumeration.
Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Suggested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Mon Apr 21 17:00:34 2025 +0200
mfd: exynos-lpass: Avoid calling exynos_lpass_disable() twice in exynos_lpass_remove()
[ Upstream commit b70b84556eeca5262d290e8619fe0af5b7664a52 ]
exynos_lpass_disable() is called twice in the remove function. Remove
one of these calls.
Fixes: 90f447170c6f ("mfd: exynos-lpass: Add runtime PM support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/74d69e8de10308c9855db6d54155a3de4b11abfd.1745247209.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexey Gladkov <legion@kernel.org>
Date: Sat Apr 26 18:16:32 2025 +0200
mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE
[ Upstream commit 59d60c16ed41475f3b5f7b605e75fbf8e3628720 ]
The name used in the macro does not exist.
drivers/mfd/stmpe-spi.c:132:26: error: use of undeclared identifier 'stmpe_id'
132 | MODULE_DEVICE_TABLE(spi, stmpe_id);
Fixes: e789995d5c61 ("mfd: Add support for STMPE SPI interface")
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/79d5a847303e45a46098f2d827d3d8a249a32be3.1745591072.git.legion@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: WangYuli <wangyuli@uniontech.com>
Date: Wed Apr 16 11:45:48 2025 +0800
MIPS: Loongson64: Add missing '#interrupt-cells' for loongson64c_ls7a
[ Upstream commit 6d223b8ffcd1593d032b71875def2daa71c53111 ]
Similar to commit 98a9e2ac3755 ("MIPS: Loongson64: DTS: Fix msi node for ls7a").
Fix follow warnings:
arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts:28.31-36.4: Warning (interrupt_provider): /bus@10000000/msi-controller@2ff00000: Missing '#interrupt-cells' in interrupt provider
arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
Fixes: 24af105962c8 ("MIPS: Loongson64: DeviceTree for LS7A PCH")
Tested-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mikhail Arkhipov <m.arhipov@rosa.ru>
Date: Wed Apr 9 00:39:06 2025 +0300
mtd: nand: ecc-mxic: Fix use of uninitialized variable ret
[ Upstream commit d95846350aac72303036a70c4cdc69ae314aa26d ]
If ctx->steps is zero, the loop processing ECC steps is skipped,
and the variable ret remains uninitialized. It is later checked
and returned, which leads to undefined behavior and may cause
unpredictable results in user space or kernel crashes.
This scenario can be triggered in edge cases such as misconfigured
geometry, ECC engine misuse, or if ctx->steps is not validated
after initialization.
Initialize ret to zero before the loop to ensure correct and safe
behavior regardless of the ctx->steps value.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 48e6633a9fa2 ("mtd: nand: mxic-ecc: Add Macronix external ECC engine support")
Signed-off-by: Mikhail Arkhipov <m.arhipov@rosa.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jakub Raczynski <j.raczynski@samsung.com>
Date: Mon Jun 9 17:31:47 2025 +0200
net/mdiobus: Fix potential out-of-bounds clause 45 read/write access
[ Upstream commit 260388f79e94fb3026c419a208ece8358bb7b555 ]
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 4e4aafcddbbf ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jakub Raczynski <j.raczynski@samsung.com>
Date: Mon Jun 9 17:31:46 2025 +0200
net/mdiobus: Fix potential out-of-bounds read/write access
[ Upstream commit 0e629694126ca388916f059453a1c36adde219c4 ]
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 080bb352fad00 ("net: phy: Maintain MDIO device and bus statistics")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Wed May 28 11:11:09 2025 +0300
net/mlx4_en: Prevent potential integer overflow calculating Hz
[ Upstream commit 54d34165b4f786d7fea8412a18fb4a54c1eab623 ]
The "freq" variable is in terms of MHz and "max_val_cycles" is in terms
of Hz. The fact that "max_val_cycles" is a u64 suggests that support
for high frequency is intended but the "freq_khz * 1000" would overflow
the u32 type if we went above 4GHz. Use unsigned long long type for the
mutliplication to prevent that.
Fixes: 31c128b66e5b ("net/mlx4_en: Choose time-stamping shift value according to HW frequency")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aDbFHe19juIJKjsb@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Moshe Shemesh <moshe@nvidia.com>
Date: Tue Jun 10 18:15:06 2025 +0300
net/mlx5: Ensure fw pages are always allocated on same NUMA
[ Upstream commit f37258133c1e95e61db532e14067e28b4881bf24 ]
When firmware asks the driver to allocate more pages, using event of
give_pages, the driver should always allocate it from same NUMA, the
original device NUMA. Current code uses dev_to_node() which can result
in different NUMA as it is changed by other driver flows, such as
mlx5_dma_zalloc_coherent_node(). Instead, use saved numa node for
allocating firmware pages.
Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Amir Tzin <amirtz@nvidia.com>
Date: Tue Jun 10 18:15:07 2025 +0300
net/mlx5: Fix ECVF vports unload on shutdown flow
[ Upstream commit 687560d8a9a2d654829ad0da1ec24242f1de711d ]
Fix shutdown flow UAF when a virtual function is created on the embedded
chip (ECVF) of a BlueField device. In such case the vport acl ingress
table is not properly destroyed.
ECVF functionality is independent of ecpf_vport_exists capability and
thus functions mlx5_eswitch_(enable|disable)_pf_vf_vports() should not
test it when enabling/disabling ECVF vports.
kernel log:
[] refcount_t: underflow; use-after-free.
[] WARNING: CPU: 3 PID: 1 at lib/refcount.c:28
refcount_warn_saturate+0x124/0x220
----------------
[] Call trace:
[] refcount_warn_saturate+0x124/0x220
[] tree_put_node+0x164/0x1e0 [mlx5_core]
[] mlx5_destroy_flow_table+0x98/0x2c0 [mlx5_core]
[] esw_acl_ingress_table_destroy+0x28/0x40 [mlx5_core]
[] esw_acl_ingress_lgcy_cleanup+0x80/0xf4 [mlx5_core]
[] esw_legacy_vport_acl_cleanup+0x44/0x60 [mlx5_core]
[] esw_vport_cleanup+0x64/0x90 [mlx5_core]
[] mlx5_esw_vport_disable+0xc0/0x1d0 [mlx5_core]
[] mlx5_eswitch_unload_ec_vf_vports+0xcc/0x150 [mlx5_core]
[] mlx5_eswitch_disable_sriov+0x198/0x2a0 [mlx5_core]
[] mlx5_device_disable_sriov+0xb8/0x1e0 [mlx5_core]
[] mlx5_sriov_detach+0x40/0x50 [mlx5_core]
[] mlx5_unload+0x40/0xc4 [mlx5_core]
[] mlx5_unload_one_devl_locked+0x6c/0xe4 [mlx5_core]
[] mlx5_unload_one+0x3c/0x60 [mlx5_core]
[] shutdown+0x7c/0xa4 [mlx5_core]
[] pci_device_shutdown+0x3c/0xa0
[] device_shutdown+0x170/0x340
[] __do_sys_reboot+0x1f4/0x2a0
[] __arm64_sys_reboot+0x2c/0x40
[] invoke_syscall+0x78/0x100
[] el0_svc_common.constprop.0+0x54/0x184
[] do_el0_svc+0x30/0xac
[] el0_svc+0x48/0x160
[] el0t_64_sync_handler+0xa4/0x12c
[] el0t_64_sync+0x1a4/0x1a8
[] --[ end trace 9c4601d68c70030e ]---
Fixes: a7719b29a821 ("net/mlx5: Add management of EC VF vports")
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patrisious Haddad <phaddad@nvidia.com>
Date: Tue Jun 10 18:15:08 2025 +0300
net/mlx5: Fix return value when searching for existing flow group
[ Upstream commit 8ec40e3f1f72bf8f8accf18020d487caa99f46a4 ]
When attempting to add a rule to an existing flow group, if a matching
flow group exists but is not active, the error code returned should be
EAGAIN, so that the rule can be added to the matching flow group once
it is active, rather than ENOENT, which indicates that no matching
flow group was found.
Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jianbo Liu <jianbol@nvidia.com>
Date: Tue Jun 10 18:15:13 2025 +0300
net/mlx5e: Fix leak of Geneve TLV option object
[ Upstream commit aa9c44b842096c553871bc68a8cebc7861fa192b ]
Previously, a unique tunnel id was added for the matching on TC
non-zero chains, to support inner header rewrite with goto action.
Later, it was used to support VF tunnel offload for vxlan, then for
Geneve and GRE. To support VF tunnel, a temporary mlx5_flow_spec is
used to parse tunnel options. For Geneve, if there is TLV option, a
object is created, or refcnt is added if already exists. But the
temporary mlx5_flow_spec is directly freed after parsing, which causes
the leak because no information regarding the object is saved in
flow's mlx5_flow_spec, which is used to free the object when deleting
the flow.
To fix the leak, call mlx5_geneve_tlv_option_del() before free the
temporary spec if it has TLV object.
Fixes: 521933cdc4aa ("net/mlx5e: Support Geneve and GRE with VF tunnel offload")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jonas Gorski <jonas.gorski@gmail.com>
Date: Mon Jun 2 21:39:52 2025 +0200
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
[ Upstream commit 5ea0d42c1980e6d10e5cb56a78021db5bfcebaaf ]
Add RGMII to supported interfaces for BCM63xx RGMII ports so they can be
actually used in RGMII mode.
Without this, phylink will fail to configure them:
[ 3.580000] b53-switch 10700000.switch GbE3 (uninitialized): validation of rgmii with support 0000000,00000000,00000000,000062ff and advertisement 0000000,00000000,00000000,000062ff failed: -EINVAL
[ 3.600000] b53-switch 10700000.switch GbE3 (uninitialized): failed to connect to PHY: -EINVAL
[ 3.610000] b53-switch 10700000.switch GbE3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4
Fixes: ce3bf94871f7 ("net: dsa: b53: add support for BCM63xx RGMIIs")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20250602193953.1010487-5-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jonas Gorski <jonas.gorski@gmail.com>
Date: Mon Jun 2 21:39:50 2025 +0200
net: dsa: b53: do not enable RGMII delay on bcm63xx
[ Upstream commit 4af523551d876ab8b8057d1e5303a860fd736fcb ]
bcm63xx's RGMII ports are always in MAC mode, never in PHY mode, so we
shouldn't enable any delays and let the PHY handle any delays as
necessary.
This fixes using RGMII ports with normal PHYs like BCM54612E, which will
handle the delay in the PHY.
Fixes: ce3bf94871f7 ("net: dsa: b53: add support for BCM63xx RGMIIs")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250602193953.1010487-3-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Álvaro Fernández Rojas <noltari@gmail.com>
Date: Thu May 29 14:44:06 2025 +0200
net: dsa: tag_brcm: legacy: fix pskb_may_pull length
[ Upstream commit efdddc4484859082da6c7877ed144c8121c8ea55 ]
BRCM_LEG_PORT_ID was incorrectly used for pskb_may_pull length.
The correct check is BRCM_LEG_TAG_LEN + VLAN_HLEN, or 10 bytes.
Fixes: 964dbf186eaa ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250529124406.2513779-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Luczaj <mhal@rbox.co>
Date: Mon Jun 9 19:08:03 2025 +0200
net: Fix TOCTOU issue in sk_is_readable()
[ Upstream commit 2660a544fdc0940bba15f70508a46cf9a6491230 ]
sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.
This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.
Ensure the function pointer does not turn NULL after the check.
Fixes: 8934ce2fd081 ("bpf: sockmap redirect ingress support")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shiming Cheng <shiming.cheng@mediatek.com>
Date: Fri May 30 09:26:08 2025 +0800
net: fix udp gso skb_segment after pull from frag_list
[ Upstream commit 3382a1ed7f778db841063f5d7e317ac55f9e7f72 ]
Commit a1e40ac5b5e9 ("net: gso: fix udp gso fraglist segmentation after
pull from frag_list") detected invalid geometry in frag_list skbs and
redirects them from skb_segment_list to more robust skb_segment. But some
packets with modified geometry can also hit bugs in that code. We don't
know how many such cases exist. Addressing each one by one also requires
touching the complex skb_segment code, which risks introducing bugs for
other types of skbs. Instead, linearize all these packets that fail the
basic invariants on gso fraglist skbs. That is more robust.
If only part of the fraglist payload is pulled into head_skb, it will
always cause exception when splitting skbs by skb_segment. For detailed
call stack information, see below.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify fraglist skbs, breaking these invariants.
In extreme cases they pull one part of data into skb linear. For UDP,
this causes three payloads with lengths of (11,11,10) bytes were
pulled tail to become (12,10,10) bytes.
The skbs no longer meets the above SKB_GSO_FRAGLIST conditions because
payload was pulled into head_skb, it needs to be linearized before pass
to regular skb_segment.
skb_segment+0xcd0/0xd14
__udp_gso_segment+0x334/0x5f4
udp4_ufo_fragment+0x118/0x15c
inet_gso_segment+0x164/0x338
skb_mac_gso_segment+0xc4/0x13c
__skb_gso_segment+0xc4/0x124
validate_xmit_skb+0x9c/0x2c0
validate_xmit_skb_list+0x4c/0x80
sch_direct_xmit+0x70/0x404
__dev_queue_xmit+0x64c/0xe5c
neigh_resolve_output+0x178/0x1c4
ip_finish_output2+0x37c/0x47c
__ip_finish_output+0x194/0x240
ip_finish_output+0x20/0xf4
ip_output+0x100/0x1a0
NF_HOOK+0xc4/0x16c
ip_forward+0x314/0x32c
ip_rcv+0x90/0x118
__netif_receive_skb+0x74/0x124
process_backlog+0xe8/0x1a4
__napi_poll+0x5c/0x1f8
net_rx_action+0x154/0x314
handle_softirqs+0x154/0x4b8
[118.376811] [C201134] rxq0_pus: [name:bug&]kernel BUG at net/core/skbuff.c:4278!
[118.376829] [C201134] rxq0_pus: [name:traps&]Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[118.470774] [C201134] rxq0_pus: [name:mrdump&]Kernel Offset: 0x178cc00000 from 0xffffffc008000000
[118.470810] [C201134] rxq0_pus: [name:mrdump&]PHYS_OFFSET: 0x40000000
[118.470827] [C201134] rxq0_pus: [name:mrdump&]pstate: 60400005 (nZCv daif +PAN -UAO)
[118.470848] [C201134] rxq0_pus: [name:mrdump&]pc : [0xffffffd79598aefc] skb_segment+0xcd0/0xd14
[118.470900] [C201134] rxq0_pus: [name:mrdump&]lr : [0xffffffd79598a5e8] skb_segment+0x3bc/0xd14
[118.470928] [C201134] rxq0_pus: [name:mrdump&]sp : ffffffc008013770
Fixes: a1e40ac5b5e9 ("gso: fix udp gso fraglist segmentation after pull from frag_list")
Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thangaraj Samynathan <thangaraj.s@microchip.com>
Date: Mon May 26 11:00:47 2025 +0530
net: lan743x: rename lan743x_reset_phy to lan743x_hw_reset_phy
[ Upstream commit 68927eb52d0af04863584930db06075d2610e194 ]
rename the function to lan743x_hw_reset_phy to better describe it
operation.
Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250526053048.287095-2-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Horatiu Vultur <horatiu.vultur@microchip.com>
Date: Wed May 21 14:41:59 2025 +0200
net: lan966x: Fix 1-step timestamping over ipv4 or ipv6
[ Upstream commit 57ee9584fd8606deef66d7b65fa4dcf94f6843aa ]
When enabling 1-step timestamping for ptp frames that are over udpv4 or
udpv6 then the inserted timestamp is added at the wrong offset in the
frame, meaning that will modify the frame at the wrong place, so the
frame will be malformed.
To fix this, the HW needs to know which kind of frame it is to know
where to insert the timestamp. For that there is a field in the IFH that
says the PDU_TYPE, which can be NONE which is the default value,
IPV4 or IPV6. Therefore make sure to set the PDU_TYPE so the HW knows
where to insert the timestamp.
Like I mention before the issue is not seen with L2 frames because by
default the PDU_TYPE has a value of 0, which represents the L2 frames.
Fixes: 77eecf25bd9d2f ("net: lan966x: Update extraction/injection for timestamping")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250521124159.2713525-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Horatiu Vultur <horatiu.vultur@microchip.com>
Date: Wed May 28 11:36:19 2025 +0200
net: lan966x: Make sure to insert the vlan tags also in host mode
[ Upstream commit 27eab4c644236a9324084a70fe79e511cbd07393 ]
When running these commands on DUT (and similar at the other end)
ip link set dev eth0 up
ip link add link eth0 name eth0.10 type vlan id 10
ip addr add 10.0.0.1/24 dev eth0.10
ip link set dev eth0.10 up
ping 10.0.0.2
The ping will fail.
The reason why is failing is because, the network interfaces for lan966x
have a flag saying that the HW can insert the vlan tags into the
frames(NETIF_F_HW_VLAN_CTAG_TX). Meaning that the frames that are
transmitted don't have the vlan tag inside the skb data, but they have
it inside the skb. We already get that vlan tag and put it in the IFH
but the problem is that we don't configure the HW to rewrite the frame
when the interface is in host mode.
The fix consists in actually configuring the HW to insert the vlan tag
if it is different than 0.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Fixes: 6d2c186afa5d ("net: lan966x: Add vlan support.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250528093619.3738998-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hari Kalavakunta <kalavakunta.hari.prasad@gmail.com>
Date: Wed Apr 9 18:23:08 2025 -0700
net: ncsi: Fix GCPS 64-bit member variables
[ Upstream commit e8a1bd8344054ce27bebf59f48e3f6bc10bc419b ]
Correct Get Controller Packet Statistics (GCPS) 64-bit wide member
variables, as per DSP0222 v1.0.0 and forward specs. The Driver currently
collects these stats, but they are yet to be exposed to the user.
Therefore, no user impact.
Statistics fixes:
Total Bytes Received (byte range 28..35)
Total Bytes Transmitted (byte range 36..43)
Total Unicast Packets Received (byte range 44..51)
Total Multicast Packets Received (byte range 52..59)
Total Broadcast Packets Received (byte range 60..67)
Total Unicast Packets Transmitted (byte range 68..75)
Total Multicast Packets Transmitted (byte range 76..83)
Total Broadcast Packets Transmitted (byte range 84..91)
Valid Bytes Received (byte range 204..11)
Signed-off-by: Hari Kalavakunta <kalavakunta.hari.prasad@gmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Link: https://patch.msgid.link/20250410012309.1343-1-kalavakunta.hari.prasad@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Faicker Mo <faicker.mo@zenlayer.com>
Date: Fri May 23 03:41:43 2025 +0000
net: openvswitch: Fix the dead loop of MPLS parse
[ Upstream commit 0bdc924bfb319fb10d1113cbf091fc26fb7b1f99 ]
The unexpected MPLS packet may not end with the bottom label stack.
When there are many stacks, The label count value has wrapped around.
A dead loop occurs, soft lockup/CPU stuck finally.
stack backtrace:
UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26
index -1 is out of range for type '__be32 [3]'
CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu
Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021
Call Trace:
<IRQ>
show_stack+0x52/0x5c
dump_stack_lvl+0x4a/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x36
__ubsan_handle_out_of_bounds.cold+0x44/0x49
key_extract_l3l4+0x82a/0x840 [openvswitch]
? kfree_skbmem+0x52/0xa0
key_extract+0x9c/0x2b0 [openvswitch]
ovs_flow_key_extract+0x124/0x350 [openvswitch]
ovs_vport_receive+0x61/0xd0 [openvswitch]
? kernel_init_free_pages.part.0+0x4a/0x70
? get_page_from_freelist+0x353/0x540
netdev_port_receive+0xc4/0x180 [openvswitch]
? netdev_port_receive+0x180/0x180 [openvswitch]
netdev_frame_hook+0x1f/0x40 [openvswitch]
__netif_receive_skb_core.constprop.0+0x23a/0xf00
__netif_receive_skb_list_core+0xfa/0x240
netif_receive_skb_list_internal+0x18e/0x2a0
napi_complete_done+0x7a/0x1c0
bnxt_poll+0x155/0x1c0 [bnxt_en]
__napi_poll+0x30/0x180
net_rx_action+0x126/0x280
? bnxt_msix+0x67/0x80 [bnxt_en]
handle_softirqs+0xda/0x2d0
irq_exit_rcu+0x96/0xc0
common_interrupt+0x8e/0xa0
</IRQ>
Fixes: fbdcdd78da7c ("Change in Openvswitch to support MPLS label depth of 3 in ingress direction")
Signed-off-by: Faicker Mo <faicker.mo@zenlayer.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/259D3404-575D-4A6D-B263-1DF59A67CF89@zenlayer.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wei Fang <wei.fang@nxp.com>
Date: Fri May 23 16:37:59 2025 +0800
net: phy: clear phydev->devlink when the link is deleted
[ Upstream commit 0795b05a59b1371b18ffbf09d385296b12e9f5d5 ]
There is a potential crash issue when disabling and re-enabling the
network port. When disabling the network port, phy_detach() calls
device_link_del() to remove the device link, but it does not clear
phydev->devlink, so phydev->devlink is not a NULL pointer. Then the
network port is re-enabled, but if phy_attach_direct() fails before
calling device_link_add(), the code jumps to the "error" label and
calls phy_detach(). Since phydev->devlink retains the old value from
the previous attach/detach cycle, device_link_del() uses the old value,
which accesses a NULL pointer and causes a crash. The simplified crash
log is as follows.
[ 24.702421] Call trace:
[ 24.704856] device_link_put_kref+0x20/0x120
[ 24.709124] device_link_del+0x30/0x48
[ 24.712864] phy_detach+0x24/0x168
[ 24.716261] phy_attach_direct+0x168/0x3a4
[ 24.720352] phylink_fwnode_phy_connect+0xc8/0x14c
[ 24.725140] phylink_of_phy_connect+0x1c/0x34
Therefore, phydev->devlink needs to be cleared when the device link is
deleted.
Fixes: bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250523083759.3741168-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Thu May 22 13:21:47 2025 +0200
net: phy: fix up const issues in to_mdio_device() and to_phy_device()
[ Upstream commit e9cb929670a1e98b592b30f03f06e9e20110f318 ]
Both to_mdio_device() and to_phy_device() "throw away" the const pointer
attribute passed to them and return a non-const pointer, which generally
is not a good thing overall. Fix this up by using container_of_const()
which was designed for this very problem.
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Fixes: 7eab14de73a8 ("mdio, phy: fix -Wshadow warnings triggered by nested container_of()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052246-conduit-glory-8fc9@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Horatiu Vultur <horatiu.vultur@microchip.com>
Date: Thu May 22 13:57:22 2025 +0200
net: phy: mscc: Fix memory leak when using one step timestamping
[ Upstream commit 846992645b25ec4253167e3f931e4597eb84af56 ]
Fix memory leak when running one-step timestamping. When running
one-step sync timestamping, the HW is configured to insert the TX time
into the frame, so there is no reason to keep the skb anymore. As in
this case the HW will never generate an interrupt to say that the frame
was timestamped, then the frame will never released.
Fix this by freeing the frame in case of one-step timestamping.
Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250522115722.2827199-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Horatiu Vultur <horatiu.vultur@microchip.com>
Date: Fri May 23 10:27:16 2025 +0200
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
[ Upstream commit 57a92d14659df3e7e7e0052358c8cc68bbbc3b5e ]
We have noticed that when PHY timestamping is enabled, L2 frames seems
to be modified by changing two 2 bytes with a value of 0. The place were
these 2 bytes seems to be random(or I couldn't find a pattern). In most
of the cases the userspace can ignore these frames but if for example
those 2 bytes are in the correction field there is nothing to do. This
seems to happen when configuring the HW for IPv4 even that the flow is
not enabled.
These 2 bytes correspond to the UDPv4 checksum and once we don't enable
clearing the checksum when using L2 frames then the frame doesn't seem
to be changed anymore.
Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250523082716.2935895-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexis Lothoré <alexis.lothore@bootlin.com>
Date: Thu May 29 11:07:23 2025 +0200
net: stmmac: make sure that ptp_rate is not 0 before configuring timestamping
[ Upstream commit 030ce919e114a111e83b7976ecb3597cefd33f26 ]
The stmmac platform drivers that do not open-code the clk_ptp_rate value
after having retrieved the default one from the device-tree can end up
with 0 in clk_ptp_rate (as clk_get_rate can return 0). It will
eventually propagate up to PTP initialization when bringing up the
interface, leading to a divide by 0:
Division by zero in kernel.
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.30-00001-g48313bd5768a #22
Hardware name: STM32 (Device Tree Support)
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x6c/0x8c
dump_stack_lvl from Ldiv0_64+0x8/0x18
Ldiv0_64 from stmmac_init_tstamp_counter+0x190/0x1a4
stmmac_init_tstamp_counter from stmmac_hw_setup+0xc1c/0x111c
stmmac_hw_setup from __stmmac_open+0x18c/0x434
__stmmac_open from stmmac_open+0x3c/0xbc
stmmac_open from __dev_open+0xf4/0x1ac
__dev_open from __dev_change_flags+0x1cc/0x224
__dev_change_flags from dev_change_flags+0x24/0x60
dev_change_flags from ip_auto_config+0x2e8/0x11a0
ip_auto_config from do_one_initcall+0x84/0x33c
do_one_initcall from kernel_init_freeable+0x1b8/0x214
kernel_init_freeable from kernel_init+0x24/0x140
kernel_init from ret_from_fork+0x14/0x28
Exception stack(0xe0815fb0 to 0xe0815ff8)
Prevent this division by 0 by adding an explicit check and error log
about the actual issue. While at it, remove the same check from
stmmac_ptp_register, which then becomes duplicate
Fixes: 19d857c9038e ("stmmac: Fix calculations for ptp counters when clock input = 50Mhz.")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250529-stmmac_tstamp_div-v4-1-d73340a794d5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Quentin Schulz <quentin.schulz@cherry.de>
Date: Tue May 27 13:56:23 2025 +0200
net: stmmac: platform: guarantee uniqueness of bus_id
[ Upstream commit eb7fd7aa35bfcc1e1fda4ecc42ccfcb526cdc780 ]
bus_id is currently derived from the ethernetX alias. If one is missing
for the device, 0 is used. If ethernet0 points to another stmmac device
or if there are 2+ stmmac devices without an ethernet alias, then bus_id
will be 0 for all of those.
This is an issue because the bus_id is used to generate the mdio bus id
(new_bus->id in drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
stmmac_mdio_register) and this needs to be unique.
This allows to avoid needing to define ethernet aliases for devices with
multiple stmmac controllers (such as the Rockchip RK3588) for multiple
stmmac devices to probe properly.
Obviously, the bus_id isn't guaranteed to be stable across reboots if no
alias is set for the device but that is easily fixed by simply adding an
alias if this is desired.
Fixes: 25c83b5c2e82 ("dt:net:stmmac: Add support to dwmac version 3.610 and 3.710")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250527-stmmac-mdio-bus_id-v2-1-a5ca78454e3c@cherry.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Charalampos Mitrodimas <charmitro@posteo.net>
Date: Tue May 27 16:35:44 2025 +0000
net: tipc: fix refcount warning in tipc_aead_encrypt
[ Upstream commit f29ccaa07cf3d35990f4d25028cc55470d29372b ]
syzbot reported a refcount warning [1] caused by calling get_net() on
a network namespace that is being destroyed (refcount=0). This happens
when a TIPC discovery timer fires during network namespace cleanup.
The recently added get_net() call in commit e279024617134 ("net/tipc:
fix slab-use-after-free Read in tipc_aead_encrypt_done") attempts to
hold a reference to the network namespace. However, if the namespace
is already being destroyed, its refcount might be zero, leading to the
use-after-free warning.
Replace get_net() with maybe_get_net(), which safely checks if the
refcount is non-zero before incrementing it. If the namespace is being
destroyed, return -ENODEV early, after releasing the bearer reference.
[1]: https://lore.kernel.org/all/68342b55.a70a0220.253bc2.0091.GAE@google.com/T/#m12019cf9ae77e1954f666914640efa36d52704a2
Reported-by: syzbot+f0c4a4aba757549ae26c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68342b55.a70a0220.253bc2.0091.GAE@google.com/T/#m12019cf9ae77e1954f666914640efa36d52704a2
Fixes: e27902461713 ("net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done")
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250527-net-tipc-warning-v2-1-df3dc398a047@posteo.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Oliver Neukum <oneukum@suse.com>
Date: Wed May 28 13:03:54 2025 +0200
net: usb: aqc111: debug info before sanitation
commit d3faab9b5a6a0477d69c38bd11c43aa5e936f929 upstream.
If we sanitize error returns, the debug statements need
to come before that so that we don't lose information.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 405b0d610745 ("net: usb: aqc111: fix error handling of usbnet read calls")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Date: Tue May 20 14:32:39 2025 +0300
net: usb: aqc111: fix error handling of usbnet read calls
[ Upstream commit 405b0d610745fb5e84fc2961d9b960abb9f3d107 ]
Syzkaller, courtesy of syzbot, identified an error (see report [1]) in
aqc111 driver, caused by incomplete sanitation of usb read calls'
results. This problem is quite similar to the one fixed in commit
920a9fa27e78 ("net: asix: add proper error handling of usb read errors").
For instance, usbnet_read_cmd() may read fewer than 'size' bytes,
even if the caller expected the full amount, and aqc111_read_cmd()
will not check its result properly. As [1] shows, this may lead
to MAC address in aqc111_bind() being only partly initialized,
triggering KMSAN warnings.
Fix the issue by verifying that the number of bytes read is
as expected and not less.
[1] Partial syzbot report:
BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:208 [inline]
BUG: KMSAN: uninit-value in usbnet_probe+0x2e57/0x4390 drivers/net/usb/usbnet.c:1830
is_valid_ether_addr include/linux/etherdevice.h:208 [inline]
usbnet_probe+0x2e57/0x4390 drivers/net/usb/usbnet.c:1830
usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396
call_driver_probe drivers/base/dd.c:-1 [inline]
really_probe+0x4d1/0xd90 drivers/base/dd.c:658
__driver_probe_device+0x268/0x380 drivers/base/dd.c:800
...
Uninit was stored to memory at:
dev_addr_mod+0xb0/0x550 net/core/dev_addr_lists.c:582
__dev_addr_set include/linux/netdevice.h:4874 [inline]
eth_hw_addr_set include/linux/etherdevice.h:325 [inline]
aqc111_bind+0x35f/0x1150 drivers/net/usb/aqc111.c:717
usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772
usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396
...
Uninit was stored to memory at:
ether_addr_copy include/linux/etherdevice.h:305 [inline]
aqc111_read_perm_mac drivers/net/usb/aqc111.c:663 [inline]
aqc111_bind+0x794/0x1150 drivers/net/usb/aqc111.c:713
usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772
usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396
call_driver_probe drivers/base/dd.c:-1 [inline]
...
Local variable buf.i created at:
aqc111_read_perm_mac drivers/net/usb/aqc111.c:656 [inline]
aqc111_bind+0x221/0x1150 drivers/net/usb/aqc111.c:713
usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772
Reported-by: syzbot+3b6b9ff7b80430020c7b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3b6b9ff7b80430020c7b
Tested-by: syzbot+3b6b9ff7b80430020c7b@syzkaller.appspotmail.com
Fixes: df2d59a2ab6c ("net: usb: aqc111: Add support for getting and setting of MAC address")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250520113240.2369438-1-n.zhandarovich@fintech.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jinjian Song <jinjian.song@fibocom.com>
Date: Fri May 30 11:16:48 2025 +0800
net: wwan: t7xx: Fix napi rx poll issue
[ Upstream commit 905fe0845bb27e4eed2ca27ea06e6c4847f1b2b1 ]
When driver handles the napi rx polling requests, the netdev might
have been released by the dellink logic triggered by the disconnect
operation on user plane. However, in the logic of processing skb in
polling, an invalid netdev is still being used, which causes a panic.
BUG: kernel NULL pointer dereference, address: 00000000000000f1
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:dev_gro_receive+0x3a/0x620
[...]
Call Trace:
<IRQ>
? __die_body+0x68/0xb0
? page_fault_oops+0x379/0x3e0
? exc_page_fault+0x4f/0xa0
? asm_exc_page_fault+0x22/0x30
? __pfx_t7xx_ccmni_recv_skb+0x10/0x10 [mtk_t7xx (HASH:1400 7)]
? dev_gro_receive+0x3a/0x620
napi_gro_receive+0xad/0x170
t7xx_ccmni_recv_skb+0x48/0x70 [mtk_t7xx (HASH:1400 7)]
t7xx_dpmaif_napi_rx_poll+0x590/0x800 [mtk_t7xx (HASH:1400 7)]
net_rx_action+0x103/0x470
irq_exit_rcu+0x13a/0x310
sysvec_apic_timer_interrupt+0x56/0x90
</IRQ>
Fixes: 5545b7b9f294 ("net: wwan: t7xx: Add NAPI support")
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Link: https://patch.msgid.link/20250530031648.5592-1-jinjian.song@fibocom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Jun 11 11:15:14 2025 +0000
net_sched: ets: fix a race in ets_qdisc_change()
[ Upstream commit d92adacdd8c2960be856e0b82acc5b7c5395fddb ]
Gerrard Tai reported a race condition in ETS, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Jun 11 11:15:11 2025 +0000
net_sched: prio: fix a race in prio_tune()
[ Upstream commit d35acc1be3480505b5931f17e4ea9b7617fea4d3 ]
Gerrard Tai reported a race condition in PRIO, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: 7b8e0b6e6599 ("net: sched: prio: delay destroying child qdiscs on change")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Jun 11 11:15:12 2025 +0000
net_sched: red: fix a race in __red_change()
[ Upstream commit 85a3e0ede38450ea3053b8c45d28cf55208409b8 ]
Gerrard Tai reported a race condition in RED, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: 0c8d13ac9607 ("net: sched: red: delay destroying child qdisc on replace")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Jun 6 16:51:27 2025 +0000
net_sched: sch_sfq: fix a potential crash on gso_skb handling
[ Upstream commit 82ffbe7776d0ac084031f114167712269bf3d832 ]
SFQ has an assumption of always being able to queue at least one packet.
However, after the blamed commit, sch->q.len can be inflated by packets
in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed
by an immediate drop.
Fix sfq_drop() to properly clear q->tail in this situation.
Tested:
ip netns add lb
ip link add dev to-lb type veth peer name in-lb netns lb
ethtool -K to-lb tso off # force qdisc to requeue gso_skb
ip netns exec lb ethtool -K in-lb gro on # enable NAPI
ip link set dev to-lb up
ip -netns lb link set dev in-lb up
ip addr add dev to-lb 192.168.20.1/24
ip -netns lb addr add dev in-lb 192.168.20.2/24
tc qdisc replace dev to-lb root sfq limit 100
ip netns exec lb netserver
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
Fixes: a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback")
Reported-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Closes: https://lore.kernel.org/netdev/9da42688-bfaa-4364-8797-e9271f3bdaef@hetzner-cloud.de/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250606165127.3629486-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Jun 11 11:15:13 2025 +0000
net_sched: tbf: fix a race in tbf_change()
[ Upstream commit 43eb466041216d25dedaef1c383ad7bd89929cbc ]
Gerrard Tai reported a race condition in TBF, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://patch.msgid.link/20250611111515.1983366-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Huajian Yang <huajianyang@asrmicro.com>
Date: Thu Apr 17 17:29:53 2025 +0800
netfilter: bridge: Move specific fragmented packet to slow_path instead of dropping it
[ Upstream commit aa04c6f45b9224b949aa35d4fa5f8d0ba07b23d4 ]
The config NF_CONNTRACK_BRIDGE will change the bridge forwarding for
fragmented packets.
The original bridge does not know that it is a fragmented packet and
forwards it directly, after NF_CONNTRACK_BRIDGE is enabled, function
nf_br_ip_fragment and br_ip6_fragment will check the headroom.
In original br_forward, insufficient headroom of skb may indeed exist,
but there's still a way to save the skb in the device driver after
dev_queue_xmit.So droping the skb will change the original bridge
forwarding in some cases.
Fixes: 3c171f496ef5 ("netfilter: bridge: add connection tracking system")
Signed-off-by: Huajian Yang <huajianyang@asrmicro.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Fri May 30 12:34:02 2025 +0200
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
[ Upstream commit 50d9ce9679dd50df2dc51ada717fa875bc248fad ]
The logic added in the blamed commit was supposed to only omit nat source
port allocation if neither the existing nor the new entry are subject to
NAT.
However, its not enough to lookup the conntrack based on the proposed
tuple, we must also check the reverse direction.
Otherwise there are esoteric cases where the collision is in the reverse
direction because that colliding connection has a port rewrite, but the
new entry doesn't. In this case, we only check the new entry and then
erronously conclude that no clash exists anymore.
The existing (udp) tuple is:
a:p -> b:P, with nat translation to s:P, i.e. pure daddr rewrite,
reverse tuple in conntrack table is s:P -> a:p.
When another UDP packet is sent directly to s, i.e. a:p->s:P, this is
correctly detected as a colliding entry: tuple is taken by existing reply
tuple in reverse direction.
But the colliding conntrack is only searched for with unreversed
direction, and we can't find such entry matching a:p->s:P.
The incorrect conclusion is that the clashing entry has timed out and
that no port address translation is required.
Such conntrack will then be discarded at nf_confirm time because the
proposed reverse direction clashes with an existing mapping in the
conntrack table.
Search for the reverse tuple too, this will then check the NAT bits of
the colliding entry and triggers port reallocation.
Followp patch extends nft_nat.sh selftest to cover this scenario.
The IPS_SEQ_ADJUST change is also a bug fix:
Instead of checking for SEQ_ADJ this tested for SEEN_REPLY and ASSURED
by accident -- _BIT is only for use with the test_bit() API.
This bug has little consequence in practice, because the sequence number
adjustments are only useful for TCP which doesn't support clash resolution.
The existing test case (conntrack_reverse_clash.sh) exercise a race
condition path (parallel conntrack creation on different CPUs), so
the colliding entries have neither SEEN_REPLY nor ASSURED set.
Thanks to Yafang Shao and Shaun Brady for an initial investigation
of this bug.
Fixes: d8f84a9bc7c4 ("netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash")
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1795
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Reported-by: Shaun Brady <brady.1345@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Fri May 23 14:20:44 2025 +0200
netfilter: nf_set_pipapo_avx2: fix initial map fill
[ Upstream commit ea77c397bff8b6d59f6d83dae1425b08f465e8b5 ]
If the first field doesn't cover the entire start map, then we must zero
out the remainder, else we leak those bits into the next match round map.
The early fix was incomplete and did only fix up the generic C
implementation.
A followup patch adds a test case to nft_concat_range.sh.
Fixes: 791a615b7ad2 ("netfilter: nf_set_pipapo: fix initial map fill")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Wed May 21 11:38:47 2025 +0200
netfilter: nf_tables: nft_fib_ipv6: fix VRF ipv4/ipv6 result discrepancy
[ Upstream commit 8b53f46eb430fe5b42d485873b85331d2de2c469 ]
With a VRF, ipv4 and ipv6 FIB expression behave differently.
fib daddr . iif oif
Will return the input interface name for ipv4, but the real device
for ipv6. Example:
If VRF device name is tvrf and real (incoming) device is veth0.
First round is ok, both ipv4 and ipv6 will yield 'veth0'.
But in the second round (incoming device will be set to "tvrf"), ipv4
will yield "tvrf" whereas ipv6 returns "veth0" for the second round too.
This makes ipv6 behave like ipv4.
A followup patch will add a test case for this, without this change
it will fail with:
get element inet t fibif6iif { tvrf . dead:1::99 . tvrf }
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FAIL: did not find tvrf . dead:1::99 . tvrf in fibif6iif
Alternatively we could either not do anything at all or change
ipv4 to also return the lower/real device, however, nft (userspace)
doc says "iif: if fib lookup provides a route then check its output
interface is identical to the packets input interface." which is what
the nft fib ipv4 behaviour is.
Fixes: f6d0cbcf09c5 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhongqiu Duan <dzq.aishenghu0@gmail.com>
Date: Thu Apr 17 15:49:30 2025 +0000
netfilter: nft_quota: match correctly when the quota just depleted
[ Upstream commit bfe7cfb65c753952735c3eed703eba9a8b96a18d ]
The xt_quota compares skb length with remaining quota, but the nft_quota
compares it with consumed bytes.
The xt_quota can match consumed bytes up to quota at maximum. But the
nft_quota break match when consumed bytes equal to quota.
i.e., nft_quota match consumed bytes in [0, quota - 1], not [0, quota].
Fixes: 795595f68d6c ("netfilter: nft_quota: dump consumed quota")
Signed-off-by: Zhongqiu Duan <dzq.aishenghu0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fernando Fernandez Mancera <fmancera@suse.de>
Date: Wed May 21 11:41:08 2025 +0200
netfilter: nft_tunnel: fix geneve_opt dump
[ Upstream commit 22a9613de4c29d7d0770bfb8a5a9d73eb8df7dad ]
When dumping a nft_tunnel with more than one geneve_opt configured the
netlink attribute hierarchy should be as follow:
NFTA_TUNNEL_KEY_OPTS
|
|--NFTA_TUNNEL_KEY_OPTS_GENEVE
| |
| |--NFTA_TUNNEL_KEY_GENEVE_CLASS
| |--NFTA_TUNNEL_KEY_GENEVE_TYPE
| |--NFTA_TUNNEL_KEY_GENEVE_DATA
|
|--NFTA_TUNNEL_KEY_OPTS_GENEVE
| |
| |--NFTA_TUNNEL_KEY_GENEVE_CLASS
| |--NFTA_TUNNEL_KEY_GENEVE_TYPE
| |--NFTA_TUNNEL_KEY_GENEVE_DATA
|
|--NFTA_TUNNEL_KEY_OPTS_GENEVE
...
Otherwise, userspace tools won't be able to fetch the geneve options
configured correctly.
Fixes: 925d844696d9 ("netfilter: nft_tunnel: add support for geneve opts")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Li Lingfeng <lilingfeng3@huawei.com>
Date: Tue Mar 4 21:05:32 2025 +0800
nfs: clear SB_RDONLY before getting superblock
[ Upstream commit 8cd9b785943c57a136536250da80ba1eb6f8eb18 ]
As described in the link, commit 52cb7f8f1778 ("nfs: ignore SB_RDONLY when
mounting nfs") removed the check for the ro flag when determining whether
to share the superblock, which caused issues when mounting different
subdirectories under the same export directory via NFSv3. However, this
change did not affect NFSv4.
For NFSv3:
1) A single superblock is created for the initial mount.
2) When mounted read-only, this superblock carries the SB_RDONLY flag.
3) Before commit 52cb7f8f1778 ("nfs: ignore SB_RDONLY when mounting nfs"):
Subsequent rw mounts would not share the existing ro superblock due to
flag mismatch, creating a new superblock without SB_RDONLY.
After the commit:
The SB_RDONLY flag is ignored during superblock comparison, and this leads
to sharing the existing superblock even for rw mounts.
Ultimately results in write operations being rejected at the VFS layer.
For NFSv4:
1) Multiple superblocks are created and the last one will be kept.
2) The actually used superblock for ro mounts doesn't carry SB_RDONLY flag.
Therefore, commit 52cb7f8f1778 doesn't affect NFSv4 mounts.
Clear SB_RDONLY before getting superblock when NFS_MOUNT_UNSHARED is not
set to fix it.
Fixes: 52cb7f8f1778 ("nfs: ignore SB_RDONLY when mounting nfs")
Closes: https://lore.kernel.org/all/12d7ea53-1202-4e21-a7ef-431c94758ce5@app.fastmail.com/T/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Li Lingfeng <lilingfeng3@huawei.com>
Date: Tue Mar 4 21:05:33 2025 +0800
nfs: ignore SB_RDONLY when remounting nfs
[ Upstream commit 80c4de6ab44c14e910117a02f2f8241ffc6ec54a ]
In some scenarios, when mounting NFS, more than one superblock may be
created. The final superblock used is the last one created, but only the
first superblock carries the ro flag passed from user space. If a ro flag
is added to the superblock via remount, it will trigger the issue
described in Link[1].
Link[2] attempted to address this by marking the superblock as ro during
the initial mount. However, this introduced a new problem in scenarios
where multiple mount points share the same superblock:
[root@a ~]# mount /dev/sdb /mnt/sdb
[root@a ~]# echo "/mnt/sdb *(rw,no_root_squash)" > /etc/exports
[root@a ~]# echo "/mnt/sdb/test_dir2 *(ro,no_root_squash)" >> /etc/exports
[root@a ~]# systemctl restart nfs-server
[root@a ~]# mount -t nfs -o rw 127.0.0.1:/mnt/sdb/test_dir1 /mnt/test_mp1
[root@a ~]# mount | grep nfs4
127.0.0.1:/mnt/sdb/test_dir1 on /mnt/test_mp1 type nfs4 (rw,relatime,...
[root@a ~]# mount -t nfs -o ro 127.0.0.1:/mnt/sdb/test_dir2 /mnt/test_mp2
[root@a ~]# mount | grep nfs4
127.0.0.1:/mnt/sdb/test_dir1 on /mnt/test_mp1 type nfs4 (ro,relatime,...
127.0.0.1:/mnt/sdb/test_dir2 on /mnt/test_mp2 type nfs4 (ro,relatime,...
[root@a ~]#
When mounting the second NFS, the shared superblock is marked as ro,
causing the previous NFS mount to become read-only.
To resolve both issues, the ro flag is no longer applied to the superblock
during remount. Instead, the ro flag on the mount is used to control
whether the mount point is read-only.
Fixes: 281cad46b34d ("NFS: Create a submount rpc_op")
Link[1]: https://lore.kernel.org/all/20240604112636.236517-3-lilingfeng@huaweicloud.com/
Link[2]: https://lore.kernel.org/all/20241130035818.1459775-1-lilingfeng3@huawei.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wentao Liang <vulab@iscas.ac.cn>
Date: Tue Apr 29 02:37:07 2025 +0900
nilfs2: add pointer check for nilfs_direct_propagate()
[ Upstream commit f43f02429295486059605997bc43803527d69791 ]
Patch series "nilfs2: improve sanity checks in dirty state propagation".
This fixes one missed check for block mapping anomalies and one improper
return of an error code during a preparation step for log writing, thereby
improving checking for filesystem corruption on writeback.
This patch (of 2):
In nilfs_direct_propagate(), the printer get from nilfs_direct_get_ptr()
need to be checked to ensure it is not an invalid pointer.
If the pointer value obtained by nilfs_direct_get_ptr() is
NILFS_BMAP_INVALID_PTR, means that the metadata (in this case, i_bmap in
the nilfs_inode_info struct) that should point to the data block at the
buffer head of the argument is corrupted and the data block is orphaned,
meaning that the file system has lost consistency.
Add a value check and return -EINVAL when it is an invalid pointer.
Link: https://lkml.kernel.org/r/20250428173808.6452-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20250428173808.6452-2-konishi.ryusuke@gmail.com
Fixes: 36a580eb489f ("nilfs2: direct block mapping")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Date: Tue Apr 29 02:37:08 2025 +0900
nilfs2: do not propagate ENOENT error from nilfs_btree_propagate()
[ Upstream commit 8e39fbb1edbb4ec9d7c1124f403877fc167fcecd ]
In preparation for writing logs, in nilfs_btree_propagate(), which makes
parent and ancestor node blocks dirty starting from a modified data block
or b-tree node block, if the starting block does not belong to the b-tree,
i.e. is isolated, nilfs_btree_do_lookup() called within the function
fails with -ENOENT.
In this case, even though -ENOENT is an internal code, it is propagated to
the log writer via nilfs_bmap_propagate() and may be erroneously returned
to system calls such as fsync().
Fix this issue by changing the error code to -EINVAL in this case, and
having the bmap layer detect metadata corruption and convert the error
code appropriately.
Link: https://lkml.kernel.org/r/20250428173808.6452-3-konishi.ryusuke@gmail.com
Fixes: 1f5abe7e7dbc ("nilfs2: replace BUG_ON and BUG calls triggerable from ioctl")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Wagner <wagi@kernel.org>
Date: Wed May 7 14:23:03 2025 +0200
nvmet-fcloop: access fcpreq only when holding reqlock
[ Upstream commit 47a827cd7929d0550c3496d70b417fcb5649b27b ]
The abort handling logic expects that the state and the fcpreq are only
accessed when holding the reqlock lock.
While at it, only handle the aborts in the abort handler.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Murad Masimov <m.masimov@mt-integration.ru>
Date: Wed Apr 2 09:56:27 2025 +0300
ocfs2: fix possible memory leak in ocfs2_finish_quota_recovery
[ Upstream commit cdc3ed3035d0fe934aa1d9b78ce256752fd3bb7d ]
If ocfs2_finish_quota_recovery() exits due to an error before passing all
rc_list elements to ocfs2_recover_local_quota_file() then it can lead to a
memory leak as rc_list may still contain elements that have to be freed.
Release all memory allocated by ocfs2_add_recovery_chunk() using
ocfs2_free_quota_recovery() instead of kfree().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Link: https://lkml.kernel.org/r/20250402065628.706359-2-m.masimov@mt-integration.ru
Fixes: 2205363dce74 ("ocfs2: Implement quota recovery")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hariprasad Kelam <hkelam@marvell.com>
Date: Thu May 22 17:28:42 2025 +0530
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
[ Upstream commit 67af4ec948e8ce3ea53a9cf614d01fddf172e56d ]
This patch addresses below issues,
1. Active traffic on the leaf node must be stopped before its send queue
is reassigned to the parent. This patch resolves the issue by marking
the node as 'Inner'.
2. During a system reboot, the interface receives TC_HTB_LEAF_DEL
and TC_HTB_LEAF_DEL_LAST callbacks to delete its HTB queues.
In the case of TC_HTB_LEAF_DEL_LAST, although the same send queue
is reassigned to the parent, the current logic still attempts to update
the real number of queues, leadning to below warnings
New queues can't be registered after device unregistration.
WARNING: CPU: 0 PID: 6475 at net/core/net-sysfs.c:1714
netdev_queue_update_kobjects+0x1e4/0x200
Fixes: 5e6808b4c68d ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250522115842.1499666-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun Jun 1 14:02:26 2025 -0400
path_overmount(): avoid false negatives
[ Upstream commit 5f31c549382bcddbbd754c72c5433b19420d485d ]
Holding namespace_sem is enough to make sure that result remains valid.
It is *not* enough to avoid false negatives from __lookup_mnt(). Mounts
can be unhashed outside of namespace_sem (stuck children getting detached
on final mntput() of lazy-umounted mount) and having an unrelated mount
removed from the hash chain while we traverse it may end up with false
negative from __lookup_mnt(). We need to sample and recheck the seqlock
component of mount_lock...
Bug predates the introduction of path_overmount() - it had come from
the code in finish_automount() that got abstracted into that helper.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Fixes: 26df6034fdb2 ("fix automount/automount race properly")
Fixes: 6ac392815628 ("fs: allow to mount beneath top mount")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Thu May 22 18:21:07 2025 -0500
PCI/DPC: Initialize aer_err_info before using it
[ Upstream commit a424b598e6a6c1e69a2bb801d6fd16e805ab2c38 ]
Previously the struct aer_err_info "info" was allocated on the stack
without being initialized, so it contained junk except for the fields we
explicitly set later.
Initialize "info" at declaration so it starts as all zeros.
Fixes: 8aefa9b0d910 ("PCI/DPC: Print AER status in DPC event handling")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-2-helgaas@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hector Martin <marcan@marcan.st>
Date: Tue Apr 1 10:17:11 2025 +0100
PCI: apple: Use gpiod_set_value_cansleep in probe flow
[ Upstream commit 7334364f9de79a9a236dd0243ba574b8d2876e89 ]
We're allowed to sleep here, so tell the GPIO core by using
gpiod_set_value_cansleep instead of gpiod_set_value.
Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up")
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patch.msgid.link/20250401091713.2765724-12-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans Zhang <18255117159@163.com>
Date: Sat Apr 19 21:30:58 2025 +0800
PCI: cadence: Fix runtime atomic count underflow
[ Upstream commit 8805f32a96d3b97cef07999fa6f52112678f7e65 ]
If the call to pci_host_probe() in cdns_pcie_host_setup() fails, PM
runtime count is decremented in the error path using pm_runtime_put_sync().
But the runtime count is not incremented by this driver, but only by the
callers (cdns_plat_pcie_probe/j721e_pcie_probe). And the callers also
decrement the runtime PM count in their error path. So this leads to the
below warning from the PM core:
"runtime PM usage count underflow!"
So fix it by getting rid of pm_runtime_put_sync() in the error path and
directly return the errno.
Fixes: 49e427e6bdd1 ("Merge branch 'pci/host-probe-refactor'")
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250419133058.162048-1-18255117159@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Date: Mon Apr 14 10:15:06 2025 +1000
PCI: Print the actual delay time in pci_bridge_wait_for_secondary_bus()
[ Upstream commit d24eba726aadf8778f2907dd42281c6380b0ccaa ]
Print the delay amount that pcie_wait_for_link_delay() is invoked with
instead of the hardcoded 1000ms value in the debug info print.
Fixes: 7b3ba09febf4 ("PCI/PM: Shorten pci_bridge_wait_for_secondary_bus() wait time for slow links")
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250414001505.21243-2-wilfred.opensource@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Tue Apr 8 11:37:20 2025 -0300
perf build: Warn when libdebuginfod devel files are not available
[ Upstream commit 4fce4b91fd1aabb326c46e237eb4b19ab72598f8 ]
While working on 'perf version --build-options' I noticed that:
$ perf version --build-options
perf version 6.15.rc1.g312a07a00d31
aio: [ on ] # HAVE_AIO_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
debuginfod: [ OFF ] # HAVE_DEBUGINFOD_SUPPORT
<SNIP>
And looking at tools/perf/Makefile.config I also noticed that it is not
opt-in, meaning we will attempt to build with it in all normal cases.
So add the usual warning at build time to let the user know that
something recommended is missing, now we see:
Makefile.config:563: No elfutils/debuginfod.h found, no debuginfo server support, please install elfutils-debuginfod-client-devel or equivalent
And after following the recommendation:
$ perf check feature debuginfod
debuginfod: [ on ] # HAVE_DEBUGINFOD_SUPPORT
$ ldd ~/bin/perf | grep debuginfo
libdebuginfod.so.1 => /lib64/libdebuginfod.so.1 (0x00007fee5cf5f000)
$
With this feature on several perf tools will fetch what is needed and
not require all the contents of the debuginfo packages, for instance:
# rpm -qa | grep kernel-debuginfo
# pahole --running_kernel_vmlinux
pahole: couldn't find a vmlinux that matches the running kernel
HINT: Maybe you're inside a container or missing a debuginfo package?
#
# perf trace -e open* perf probe --vars icmp_rcv
0.000 ( 0.005 ms): perf/97391 openat(dfd: CWD, filename: "/etc/ld.so.cache", flags: RDONLY|CLOEXEC) = 3
0.014 ( 0.004 ms): perf/97391 openat(dfd: CWD, filename: "/lib64/libm.so.6", flags: RDONLY|CLOEXEC) = 3
<SNIP>
32130.100 ( 0.008 ms): perf/97391 openat(dfd: CWD, filename: "/root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo") = 3
<SNIP>
Available variables at icmp_rcv
@<icmp_rcv+0>
struct sk_buff* skb
<SNIP>
#
# pahole --running_kernel_vmlinux
/root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
# file /root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
/root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=aa3c82b4a13f9c0e0301bebb20fe958c4db6f362, with debug_info, not stripped
# ls -la /root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
-r--------. 1 root root 475401512 Mar 27 21:00 /root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
#
Then, cached:
# perf stat --null perf probe --vars icmp_rcv
Available variables at icmp_rcv
@<icmp_rcv+0>
struct sk_buff* skb
Performance counter stats for 'perf probe --vars icmp_rcv':
0.671389041 seconds time elapsed
0.519176000 seconds user
0.150860000 seconds sys
Fixes: c7a14fdcb3fa7736 ("perf build-ids: Fall back to debuginfod query if debuginfo not found")
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Link: https://lore.kernel.org/r/Z_dkNDj9EPFwPqq1@gmail.com
[ Folded patch from Ingo to have the debian/ubuntu devel package added build warning message ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adrian Hunter <adrian.hunter@intel.com>
Date: Mon May 12 12:39:30 2025 +0300
perf intel-pt: Fix PEBS-via-PT data_src
[ Upstream commit e00eac6b5b6d956f38d8880c44bf7fd9954063c3 ]
The Fixes commit did not add support for decoding PEBS-via-PT data_src.
Fix by adding support.
PEBS-via-PT is a feature of some E-core processors, starting with
processors based on Tremont microarchitecture. Because the kernel only
supports Intel PT features that are on all processors, there is no support
for PEBS-via-PT on hybrids.
Currently that leaves processors based on Tremont, Gracemont and Crestmont,
however there are no events on Tremont that produce data_src information,
and for Gracemont and Crestmont there are only:
mem-loads event=0xd0,umask=0x5,ldlat=3
mem-stores event=0xd0,umask=0x6
Affected processors include Alder Lake N (Gracemont), Sierra Forest
(Crestmont) and Grand Ridge (Crestmont).
Example:
# perf record -d -e intel_pt/branch=0/ -e mem-loads/aux-output/pp uname
Before:
# perf.before script --itrace=o -Fdata_src
0 |OP No|LVL N/A|SNP N/A|TLB N/A|LCK No|BLK N/A
0 |OP No|LVL N/A|SNP N/A|TLB N/A|LCK No|BLK N/A
After:
# perf script --itrace=o -Fdata_src
10268100142 |OP LOAD|LVL L1 hit|SNP None|TLB L1 or L2 hit|LCK No|BLK N/A
10450100442 |OP LOAD|LVL L2 hit|SNP None|TLB L2 miss|LCK No|BLK N/A
Fixes: 975846eddf907297 ("perf intel-pt: Add memory information to synthesized PEBS sample")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250512093932.79854-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dapeng Mi <dapeng1.mi@linux.intel.com>
Date: Thu Apr 3 06:08:10 2025 +0000
perf record: Fix incorrect --user-regs comments
[ Upstream commit a4a859eb6704a8aa46aa1cec5396c8d41383a26b ]
The comment of "--user-regs" option is not correct, fix it.
"on interrupt," -> "in user space,"
Fixes: 84c417422798c897 ("perf record: Support direct --user-regs arguments")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250403060810.196028-1-dapeng1.mi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adrian Hunter <adrian.hunter@intel.com>
Date: Mon May 12 12:39:32 2025 +0300
perf scripts python: exported-sql-viewer.py: Fix pattern matching with Python 3
[ Upstream commit 17e548405a81665fd14cee960db7d093d1396400 ]
The script allows the user to enter patterns to find symbols.
The pattern matching characters are converted for use in SQL.
For PostgreSQL the conversion involves using the Python maketrans()
method which is slightly different in Python 3 compared with Python 2.
Fix to work in Python 3.
Fixes: beda0e725e5f06ac ("perf script python: Add Python3 support to exported-sql-viewer.py")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tony Jones <tonyj@suse.de>
Link: https://lore.kernel.org/r/20250512093932.79854-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Leo Yan <leo.yan@arm.com>
Date: Mon Mar 31 18:27:59 2025 +0100
perf tests switch-tracking: Fix timestamp comparison
[ Upstream commit 628e124404b3db5e10e17228e680a2999018ab33 ]
The test might fail on the Arm64 platform with the error:
# perf test -vvv "Track with sched_switch"
Missing sched_switch events
#
The issue is caused by incorrect handling of timestamp comparisons. The
comparison result, a signed 64-bit value, was being directly cast to an
int, leading to incorrect sorting for sched events.
The case does not fail everytime, usually I can trigger the failure
after run 20 ~ 30 times:
# while true; do perf test "Track with sched_switch"; done
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
I used cross compiler to build Perf tool on my host machine and tested on
Debian / Juno board. Generally, I think this issue is not very specific
to GCC versions. As both internal CI and my local env can reproduce the
issue.
My Host Build compiler:
# aarch64-linux-gnu-gcc --version
aarch64-linux-gnu-gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0
Juno Board:
# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 12 (bookworm)
Release: 12
Codename: bookworm
Fix this by explicitly returning 0, 1, or -1 based on whether the result
is zero, positive, or negative.
Fixes: d44bc558297222d9 ("perf tests: Add a test for tracking with sched_switch")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250331172759.115604-1-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anubhav Shelat <ashelat@redhat.com>
Date: Thu Apr 3 12:04:12 2025 -0400
perf trace: Always print return value for syscalls returning a pid
[ Upstream commit c7a48ea9b919e2fa0e4a1d9938fdb03e9afe276c ]
The syscalls that were consistently observed were set_robust_list and
rseq. This is because perf cannot find their child process.
This change ensures that the return value is always printed.
Before:
0.256 ( 0.001 ms): set_robust_list(head: 0x7f09c77dba20, len: 24) =
0.259 ( 0.001 ms): rseq(rseq: 0x7f09c77dc0e0, rseq_len: 32, sig: 1392848979) =
After:
0.270 ( 0.002 ms): set_robust_list(head: 0x7f0bb14a6a20, len: 24) = 0
0.273 ( 0.002 ms): rseq(rseq: 0x7f0bb14a70e0, rseq_len: 32, sig: 1392848979) = 0
Committer notes:
As discussed in the thread in the Link: tag below, these two don't
return a pid, but for syscalls returning one, we need to print the
result and if we manage to find the children in 'perf trace' data
structures, then print its name as well.
Fixes: 11c8e39f5133aed9 ("perf trace: Infrastructure to show COMM strings for syscalls returning PIDs")
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Anubhav Shelat <ashelat@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250403160411.159238-2-ashelat@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Namhyung Kim <namhyung@kernel.org>
Date: Wed Apr 2 22:42:13 2025 -0700
perf trace: Fix leaks of 'struct thread' in set_filter_loop_pids()
[ Upstream commit 30d20fb1f84ad5c92706fe2c6cbb2d4cc293e671 ]
I've found some leaks from 'perf trace -a'.
It seems there are more leaks but this is what I can find for now.
Fixes: 082ab9a18e532864 ("perf trace: Filter out 'sshd' in the tracer ancestry in syswide tracing")
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250403054213.7021-1-namhyung@kernel.org
[ split from a larget patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Wed Apr 9 21:58:19 2025 -0300
perf ui browser hists: Set actions->thread before calling do_zoom_thread()
[ Upstream commit 1741189d843a1d5ef38538bc52a3760e2e46cb2e ]
In 7cecb7fe8388d5c3 ("perf hists: Move sort__has_comm into struct
perf_hpp_list") it assumes that act->thread is set prior to calling
do_zoom_thread().
This doesn't happen when we use ESC or the Left arrow key to Zoom out of
a specific thread, making this operation not to work and we get stuck
into the thread zoom.
In 6422184b087ff435 ("perf hists browser: Simplify zooming code using
pstack_peek()") it says no need to set actions->thread, and at that
point that was true, but in 7cecb7fe8388d5c3 a actions->thread == NULL
check was added before the zoom out of thread could kick in.
We can zoom out using the alternative 't' thread zoom toggle hotkey to
finally set actions->thread before calling do_zoom_thread() and zoom
out, but lets also fix the ESC/Zoom out of thread case.
Fixes: 7cecb7fe8388d5c3 ("perf hists: Move sort__has_comm into struct perf_hpp_list")
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Z_TYux5fUg2pW-pF@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anand Moon <linux.amoon@gmail.com>
Date: Mon Apr 7 12:02:03 2025 +0530
perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create()
[ Upstream commit 097469a2b0f12b91b4f27b9e9e4f2c46484cde30 ]
The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses
smp_processor_id(), which assumes disabled preemption. This leads to kernel
warnings during module loading because meson_ddr_pmu_create() can be called
in a preemptible context.
Following kernel warning and stack trace:
[ 31.745138] [ T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289
[ 31.745154] [ T2289] caller is debug_smp_processor_id+0x28/0x38
[ 31.745172] [ T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0
[ 31.745181] [ T2289] Tainted: [W]=WARN
[ 31.745183] [ T2289] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ 31.745188] [ T2289] Call trace:
[ 31.745191] [ T2289] show_stack+0x28/0x40 (C)
[ 31.745199] [ T2289] dump_stack_lvl+0x4c/0x198
[ 31.745205] [ T2289] dump_stack+0x20/0x50
[ 31.745209] [ T2289] check_preemption_disabled+0xec/0xf0
[ 31.745213] [ T2289] debug_smp_processor_id+0x28/0x38
[ 31.745216] [ T2289] meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[ 31.745237] [ T2289] g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[ 31.745246] [ T2289] platform_probe+0x98/0xe0
[ 31.745254] [ T2289] really_probe+0x144/0x3f8
[ 31.745258] [ T2289] __driver_probe_device+0xb8/0x180
[ 31.745261] [ T2289] driver_probe_device+0x54/0x268
[ 31.745264] [ T2289] __driver_attach+0x11c/0x288
[ 31.745267] [ T2289] bus_for_each_dev+0xfc/0x160
[ 31.745274] [ T2289] driver_attach+0x34/0x50
[ 31.745277] [ T2289] bus_add_driver+0x160/0x2b0
[ 31.745281] [ T2289] driver_register+0x78/0x120
[ 31.745285] [ T2289] __platform_driver_register+0x30/0x48
[ 31.745288] [ T2289] init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[ 31.745298] [ T2289] do_one_initcall+0x11c/0x438
[ 31.745303] [ T2289] do_init_module+0x68/0x228
[ 31.745311] [ T2289] load_module+0x118c/0x13a8
[ 31.745315] [ T2289] __arm64_sys_finit_module+0x274/0x390
[ 31.745320] [ T2289] invoke_syscall+0x74/0x108
[ 31.745326] [ T2289] el0_svc_common+0x90/0xf8
[ 31.745330] [ T2289] do_el0_svc+0x2c/0x48
[ 31.745333] [ T2289] el0_svc+0x60/0x150
[ 31.745337] [ T2289] el0t_64_sync_handler+0x80/0x118
[ 31.745341] [ T2289] el0t_64_sync+0x1b8/0x1c0
Changes replaces smp_processor_id() with raw_smp_processor_id() to
ensure safe CPU ID retrieval in preemptible contexts.
Cc: Jiucheng Xu <jiucheng.xu@amlogic.com>
Fixes: 2016e2113d35 ("perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250407063206.5211-1-linux.amoon@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qing Wang <wangqing7171@gmail.com>
Date: Sat Apr 5 22:16:35 2025 +0800
perf/core: Fix broken throttling when max_samples_per_tick=1
[ Upstream commit f51972e6f8b9a737b2b3eb588069acb538fa72de ]
According to the throttling mechanism, the pmu interrupts number can not
exceed the max_samples_per_tick in one tick. But this mechanism is
ineffective when max_samples_per_tick=1, because the throttling check is
skipped during the first interrupt and only performed when the second
interrupt arrives.
Perhaps this bug may cause little influence in one tick, but if in a
larger time scale, the problem can not be underestimated.
When max_samples_per_tick = 1:
Allowed-interrupts-per-second max-samples-per-second default-HZ ARCH
200 100 100 X86
500 250 250 ARM64
...
Obviously, the pmu interrupt number far exceed the user's expect.
Fixes: e050e3f0a71b ("perf: Fix broken interrupt rate throttling")
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250405141635.243786-3-wangqing7171@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Zijlstra <peterz@infradead.org>
Date: Fri Jan 17 10:54:50 2025 +0100
perf: Ensure bpf_perf_link path is properly serialized
[ Upstream commit 7ed9138a72829d2035ecbd8dbd35b1bc3c137c40 ]
Ravi reported that the bpf_perf_link_attach() usage of
perf_event_set_bpf_prog() is not serialized by ctx->mutex, unlike the
PERF_EVENT_IOC_SET_BPF case.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lkml.kernel.org/r/20250307193305.486326750@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chenyuan Yang <chenyuan0y@gmail.com>
Date: Mon Apr 14 07:50:50 2025 -0500
phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug
[ Upstream commit d14402a38c2d868cacb1facaf9be908ca6558e59 ]
The qmp_usb_iomap() helper function currently returns the raw result of
devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return
a NULL pointer and the caller only checks error pointers with IS_ERR(),
NULL could bypass the check and lead to an invalid dereference.
Fix the issue by checking if devm_ioremap() returns NULL. When it does,
qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM),
ensuring safe and consistent error handling.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: a5d6b1ac56cb ("phy: qcom-qmp-usb: fix memleak on probe deferral")
CC: Johan Hovold <johan@kernel.org>
CC: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250414125050.2118619-1-chenyuan0y@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gabor Juhos <j4g8y7@gmail.com>
Date: Wed May 14 21:18:33 2025 +0200
pinctrl: armada-37xx: set GPIO output value before setting direction
commit e6ebd4942981f8ad37189bbb36a3c8495e21ef4c upstream.
Changing the direction before updating the output value in the
OUTPUT_VAL register may result in a glitch on the output line
if the previous value in the OUTPUT_VAL register is different
from the one we want to set.
In order to avoid that, update the output value before changing
the direction.
Cc: stable@vger.kernel.org
Fixes: 6702abb3bf23 ("pinctrl: armada-37xx: Fix direction_output() callback behavior")
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-2-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Gabor Juhos <j4g8y7@gmail.com>
Date: Wed May 14 21:18:32 2025 +0200
pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31
commit 947c93eb29c2a581c0b0b6d5f21af3c2b7ff6d25 upstream.
The controller has two consecutive OUTPUT_VAL registers and both
holds output value for 32 GPIOs. Due to a missing adjustment, the
current code always uses the first register while setting the
output value whereas it should use the second one for GPIOs > 31.
Add the missing armada_37xx_update_reg() call to adjust the register
according to the 'offset' parameter of the function to fix the issue.
Cc: stable@vger.kernel.org
Fixes: 6702abb3bf23 ("pinctrl: armada-37xx: Fix direction_output() callback behavior")
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-1-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Thu May 8 23:08:07 2025 +0300
pinctrl: at91: Fix possible out-of-boundary access
[ Upstream commit 762ef7d1e6eefad9896560bfcb9bcf7f1b6df9c1 ]
at91_gpio_probe() doesn't check that given OF alias is not available or
something went wrong when trying to get it. This might have consequences
when accessing gpio_chips array with that value as an index. Note, that
BUG() can be compiled out and hence won't actually perform the required
checks.
Fixes: 6732ae5cb47c ("ARM: at91: add pinctrl support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/r/202505052343.UHF1Zo93-lkp@intel.com/
Link: https://lore.kernel.org/20250508200807.1384558-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wojciech Slenska <wojciech.slenska@gmail.com>
Date: Fri May 23 12:14:37 2025 +0200
pinctrl: qcom: pinctrl-qcm2290: Add missing pins
[ Upstream commit 315345610faee8a0568b522dba9e35067d1732ab ]
Added the missing pins to the qcm2290_pins table.
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Fixes: 48e049ef1238 ("pinctrl: qcom: Add QCM2290 pinctrl driver")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250523101437.59092-1-wojciech.slenska@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Tue Jun 3 18:19:27 2025 +0200
PM: sleep: Fix power.is_suspended cleanup for direct-complete devices
[ Upstream commit d46c4c839c20a599a0eb8d73708ce401f9c7d06d ]
Commit 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete
set on errors") caused power.is_suspended to be set for devices with
power.direct_complete set, but it forgot to ensure the clearing of that
flag for them in device_resume(), so power.is_suspended is still set for
them during the next system suspend-resume cycle.
If that cycle is aborted in dpm_suspend(), the subsequent invocation of
dpm_resume() will trigger a device_resume() call for every device and
because power.is_suspended is set for the devices in question, they will
not be skipped by device_resume() as expected which causes scary error
messages to be logged (as appropriate).
To address this issue, move the clearing of power.is_suspended in
device_resume() immediately after the power.is_suspended check so it
will be always cleared for all devices processed by that function.
Fixes: 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete set on errors")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4280
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/4990586.GXAFRqVoOG@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Fri May 9 14:51:47 2025 +0200
PM: sleep: Print PM debug messages during hibernation
[ Upstream commit 1b17d4525bca3916644c41e01522df8fa0f8b90b ]
Commit cdb8c100d8a4 ("include/linux/suspend.h: Only show pm_pr_dbg
messages at suspend/resume") caused PM debug messages to only be
printed during system-wide suspend and resume in progress, but it
forgot about hibernation.
Address this by adding a check for hibernation in progress to
pm_debug_messages_should_print().
Fixes: cdb8c100d8a4 ("include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/4998903.GXAFRqVoOG@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zijun Hu <quic_zijuhu@quicinc.com>
Date: Mon May 5 17:26:51 2025 +0800
PM: wakeup: Delete space in the end of string shown by pm_show_wakelocks()
[ Upstream commit f0050a3e214aa941b78ad4caf122a735a24d81a6 ]
pm_show_wakelocks() is called to generate a string when showing
attributes /sys/power/wake_(lock|unlock), but the string ends
with an unwanted space that was added back by mistake by commit
c9d967b2ce40 ("PM: wakeup: simplify the output logic of
pm_show_wakelocks()").
Remove the unwanted space.
Fixes: c9d967b2ce40 ("PM: wakeup: simplify the output logic of pm_show_wakelocks()")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://patch.msgid.link/20250505-fix_power-v1-1-0f7f2c2f338c@quicinc.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Thu May 8 09:29:23 2025 +0300
pmdomain: core: Fix error checking in genpd_dev_pm_attach_by_id()
[ Upstream commit 0f5757667ec0aaf2456c3b76fcf0c6c3ea3591fe ]
The error checking for of_count_phandle_with_args() does not handle
negative error codes correctly. The problem is that "index" is a u32 so
in the condition "if (index >= num_domains)" negative error codes stored
in "num_domains" are type promoted to very high positive values and
"index" is always going to be valid.
Test for negative error codes first and then test if "index" is valid.
Fixes: 3ccf3f0cd197 ("PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBxPQ8AI8N5v-7rL@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Oleg Nesterov <oleg@redhat.com>
Date: Fri Jun 13 19:26:50 2025 +0200
posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del()
commit f90fff1e152dedf52b932240ebbd670d83330eca upstream.
If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().
If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.
Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.
This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because
exit_task_work() is called before exit_notify(). But the check still
makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail
anyway in this case.
Cc: stable@vger.kernel.org
Reported-by: Benoît Sevens <bsevens@google.com>
Fixes: 0bdd2ed4138e ("sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alexander Shiyan <eagle.alexander923@gmail.com>
Date: Fri Mar 7 08:38:09 2025 +0300
power: reset: at91-reset: Optimize at91_reset()
[ Upstream commit 62d48983f215bf1dd48665913318101fa3414dcf ]
This patch adds a small optimization to the low-level at91_reset()
function, which includes:
- Removes the extra branch, since the following store operations
already have proper condition checks.
- Removes the definition of the clobber register r4, since it is
no longer used in the code.
Fixes: fcd0532fac2a ("power: reset: at91-reset: make at91sam9g45_restart() generic")
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250307053809.20245-1-eagle.alexander923@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eddie James <eajames@linux.ibm.com>
Date: Tue Feb 11 10:20:54 2025 -0600
powerpc/crash: Fix non-smp kexec preparation
[ Upstream commit 882b25af265de8e05c66f72b9a29f6047102958f ]
In non-smp configurations, crash_kexec_prepare is never called in
the crash shutdown path. One result of this is that the crashing_cpu
variable is never set, preventing crash_save_cpu from storing the
NT_PRSTATUS elf note in the core dump.
Fixes: c7255058b543 ("powerpc/crash: save cpu register data in crash_smp_send_stop()")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250211162054.857762-1-eajames@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Date: Tue Jun 10 07:42:26 2025 +0530
powerpc/powernv/memtrace: Fix out of bounds issue in memtrace mmap
[ Upstream commit cd097df4596f3a1e9d75eb8520162de1eb8485b2 ]
memtrace mmap issue has an out of bounds issue. This patch fixes the by
checking that the requested mapping region size should stay within the
allocated region size.
Reported-by: Jonathan Greental <yonatan02greental@gmail.com>
Fixes: 08a022ad3dfa ("powerpc/powernv/memtrace: Allow mmaping trace buffers")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610021227.361980-1-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Haren Myneni <haren@linux.ibm.com>
Date: Tue Jun 10 07:42:27 2025 +0530
powerpc/vas: Return -EINVAL if the offset is non-zero in mmap()
[ Upstream commit 0d67f0dee6c9176bc09a5482dd7346e3a0f14d0b ]
The user space calls mmap() to map VAS window paste address
and the kernel returns the complete mapped page for each
window. So return -EINVAL if non-zero is passed for offset
parameter to mmap().
See Documentation/arch/powerpc/vas-api.rst for mmap()
restrictions.
Co-developed-by: Jonathan Greental <yonatan02greental@gmail.com>
Signed-off-by: Jonathan Greental <yonatan02greental@gmail.com>
Reported-by: Jonathan Greental <yonatan02greental@gmail.com>
Fixes: dda44eb29c23 ("powerpc/vas: Add VAS user space API")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610021227.361980-2-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Date: Thu Apr 17 12:53:05 2025 +0200
powerpc: do not build ppc_save_regs.o always
[ Upstream commit 497b7794aef03d525a5be05ae78dd7137c6861a5 ]
The Fixes commit below tried to add CONFIG_PPC_BOOK3S to one of the
conditions to enable the build of ppc_save_regs.o. But it failed to do
so, in fact. The commit omitted to add a dollar sign.
Therefore, ppc_save_regs.o is built always these days (as
"(CONFIG_PPC_BOOK3S)" is never an empty string).
Fix this by adding the missing dollar sign.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Fixes: fc2a5a6161a2 ("powerpc/64s: ppc_save_regs is now needed for all 64s builds")
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250417105305.397128-1-jirislaby@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jeongjun Park <aha310510@gmail.com>
Date: Wed May 21 01:07:17 2025 +0900
ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()
[ Upstream commit 87f7ce260a3c838b49e1dc1ceedf1006795157a2 ]
There is no disagreement that we should check both ptp->is_virtual_clock
and ptp->n_vclocks to check if the ptp virtual clock is in use.
However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in
ptp_vclock_in_use(), we observe a recursive lock in the call trace
starting from n_vclocks_store().
============================================
WARNING: possible recursive locking detected
6.15.0-rc6 #1 Not tainted
--------------------------------------------
syz.0.1540/13807 is trying to acquire lock:
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline]
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415
but task is already holding lock:
ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ptp->n_vclocks_mux);
lock(&ptp->n_vclocks_mux);
*** DEADLOCK ***
....
============================================
The best way to solve this is to remove the logic that checks
ptp->n_vclocks in ptp_vclock_in_use().
The reason why this is appropriate is that any path that uses
ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater
than 0 before unregistering vclocks, and all functions are already
written this way. And in the function that uses ptp->n_vclocks, we
already get ptp->n_vclocks_mux before unregistering vclocks.
Therefore, we need to remove the redundant check for ptp->n_vclocks in
ptp_vclock_in_use() to prevent recursive locking.
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20250520160717.7350-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <kees@kernel.org>
Date: Fri May 30 15:18:28 2025 -0700
randstruct: gcc-plugin: Fix attribute addition
[ Upstream commit f39f18f3c3531aa802b58a20d39d96e82eb96c14 ]
Based on changes in the 2021 public version of the randstruct
out-of-tree GCC plugin[1], more carefully update the attributes on
resulting decls, to avoid tripping checks in GCC 15's
comptypes_check_enum_int() when it has been configured with
"--enable-checking=misc":
arch/arm64/kernel/kexec_image.c:132:14: internal compiler error: in comptypes_check_enum_int, at c/c-typeck.cc:1519
132 | const struct kexec_file_ops kexec_image_ops = {
| ^~~~~~~~~~~~~~
internal_error(char const*, ...), at gcc/gcc/diagnostic-global-context.cc:517
fancy_abort(char const*, int, char const*), at gcc/gcc/diagnostic.cc:1803
comptypes_check_enum_int(tree_node*, tree_node*, bool*), at gcc/gcc/c/c-typeck.cc:1519
...
Link: https://archive.org/download/grsecurity/grsecurity-3.1-5.10.41-202105280954.patch.gz [1]
Reported-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Closes: https://github.com/KSPP/linux/issues/367
Closes: https://lore.kernel.org/lkml/20250530000646.104457-1-thiago.bauermann@linaro.org/
Reported-by: Ingo Saitz <ingo@hannover.ccc.de>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1104745
Fixes: 313dd1b62921 ("gcc-plugins: Add the randstruct plugin")
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Link: https://lore.kernel.org/r/20250530221824.work.623-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <kees@kernel.org>
Date: Sat Apr 26 00:37:52 2025 -0700
randstruct: gcc-plugin: Remove bogus void member
[ Upstream commit e136a4062174a9a8d1c1447ca040ea81accfa6a8 ]
When building the randomized replacement tree of struct members, the
randstruct GCC plugin would insert, as the first member, a 0-sized void
member. This appears as though it was done to catch non-designated
("unnamed") static initializers, which wouldn't be stable since they
depend on the original struct layout order.
This was accomplished by having the side-effect of the "void member"
tripping an assert in GCC internals (count_type_elements) if the member
list ever needed to be counted (e.g. for figuring out the order of members
during a non-designated initialization), which would catch impossible type
(void) in the struct:
security/landlock/fs.c: In function ‘hook_file_ioctl_common’:
security/landlock/fs.c:1745:61: internal compiler error: in count_type_elements, at expr.cc:7075
1745 | .u.op = &(struct lsm_ioctlop_audit) {
| ^
static HOST_WIDE_INT
count_type_elements (const_tree type, bool for_ctor_p)
{
switch (TREE_CODE (type))
...
case VOID_TYPE:
default:
gcc_unreachable ();
}
}
However this is a redundant safety measure since randstruct uses the
__designated_initializer attribute both internally and within the
__randomized_layout attribute macro so that this would be enforced
by the compiler directly even when randstruct was not enabled (via
-Wdesignated-init).
A recent change in Landlock ended up tripping the same member counting
routine when using a full-struct copy initializer as part of an anonymous
initializer. This, however, is a false positive as the initializer is
copying between identical structs (and hence identical layouts). The
"path" member is "struct path", a randomized struct, and is being copied
to from another "struct path", the "f_path" member:
landlock_log_denial(landlock_cred(file->f_cred), &(struct landlock_request) {
.type = LANDLOCK_REQUEST_FS_ACCESS,
.audit = {
.type = LSM_AUDIT_DATA_IOCTL_OP,
.u.op = &(struct lsm_ioctlop_audit) {
.path = file->f_path,
.cmd = cmd,
},
},
...
As can be seen with the coming randstruct KUnit test, there appears to
be no behavioral problems with this kind of initialization when the void
member is removed from the randstruct GCC plugin, so remove it.
Reported-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Closes: https://lore.kernel.org/lkml/Z_PRaKx7q70MKgCA@gallifrey/
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/lkml/20250407-kbuild-disable-gcc-plugins-v1-1-5d46ae583f5e@kernel.org/
Reported-by: WangYuli <wangyuli@uniontech.com>
Closes: https://lore.kernel.org/lkml/337D5D4887277B27+3c677db3-a8b9-47f0-93a4-7809355f1381@uniontech.com/
Fixes: 313dd1b62921 ("gcc-plugins: Add the randstruct plugin")
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yongliang Gao <leonylgao@tencent.com>
Date: Sun Feb 16 16:41:09 2025 +0800
rcu/cpu_stall_cputime: fix the hardirq count for x86 architecture
[ Upstream commit da6b85598af30e9fec34d82882d7e1e39f3da769 ]
When counting the number of hardirqs in the x86 architecture,
it is essential to add arch_irq_stat_cpu to ensure accuracy.
For example, a CPU loop within the rcu_read_lock function.
Before:
[ 70.910184] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 70.910436] rcu: 3-....: (4999 ticks this GP) idle=***
[ 70.910711] rcu: hardirqs softirqs csw/system
[ 70.910870] rcu: number: 0 657 0
[ 70.911024] rcu: cputime: 0 0 2498 ==> 2498(ms)
[ 70.911278] rcu: (t=5001 jiffies g=3677 q=29 ncpus=8)
After:
[ 68.046132] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 68.046354] rcu: 2-....: (4999 ticks this GP) idle=***
[ 68.046628] rcu: hardirqs softirqs csw/system
[ 68.046793] rcu: number: 2498 663 0
[ 68.046951] rcu: cputime: 0 0 2496 ==> 2496(ms)
[ 68.047244] rcu: (t=5000 jiffies g=3825 q=4 ncpus=8)
Fixes: be42f00b73a0 ("rcu: Add RCU stall diagnosis information")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501090842.SfI6QPGS-lkp@intel.com/
Signed-off-by: Yongliang Gao <leonylgao@tencent.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Link: https://lore.kernel.org/r/20250216084109.3109837-1-leonylgao@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jack Morgenstein <jackm@nvidia.com>
Date: Wed May 21 14:36:02 2025 +0300
RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work
[ Upstream commit 92a251c3df8ea1991cd9fe00f1ab0cfce18d7711 ]
The cited commit fixed a crash when cma_netevent_callback was called for
a cma_id while work on that id from a previous call had not yet started.
The work item was re-initialized in the second call, which corrupted the
work item currently in the work queue.
However, it left a problem when queue_work fails (because the item is
still pending in the work queue from a previous call). In this case,
cma_id_put (which is called in the work handler) is therefore not
called. This results in a userspace process hang (zombie process).
Fix this by calling cma_id_put() if queue_work fails.
Fixes: 45f5dcdd0497 ("RDMA/cma: Fix workqueue crash in cma_netevent_work_handler")
Link: https://patch.msgid.link/r/4f3640b501e48d0166f312a64fdadf72b059bd04.1747827103.git.leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@nvidia.com>
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junxian Huang <huangjunxian6@hisilicon.com>
Date: Mon Apr 21 21:27:49 2025 +0800
RDMA/hns: Include hnae3.h in hns_roce_hw_v2.h
[ Upstream commit 2b11d33de23262cb20d1dcb24b586dbb8f54d463 ]
hns_roce_hw_v2.h has a direct dependency on hnae3.h due to the
inline function hns_roce_write64(), but it doesn't include this
header currently. This leads to that files including
hns_roce_hw_v2.h must also include hnae3.h to avoid compilation
errors, even if they themselves don't really rely on hnae3.h.
This doesn't make sense, hns_roce_hw_v2.h should include hnae3.h
directly.
Fixes: d3743fa94ccd ("RDMA/hns: Fix the chip hanging caused by sending doorbell during reset")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250421132750.1363348-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patrisious Haddad <phaddad@nvidia.com>
Date: Mon Apr 28 14:34:07 2025 +0300
RDMA/mlx5: Fix error flow upon firmware failure for RQ destruction
[ Upstream commit 5d2ea5aebbb2f3ebde4403f9c55b2b057e5dd2d6 ]
Upon RQ destruction if the firmware command fails which is the
last resource to be destroyed some SW resources were already cleaned
regardless of the failure.
Now properly rollback the object to its original state upon such failure.
In order to avoid a use-after free in case someone tries to destroy the
object again, which results in the following kernel trace:
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 37589 at lib/refcount.c:28 refcount_warn_saturate+0xf4/0x148
Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) rfkill mlx5_core(OE) mlxdevm(OE) ib_uverbs(OE) ib_core(OE) psample mlxfw(OE) mlx_compat(OE) macsec tls pci_hyperv_intf sunrpc vfat fat virtio_net net_failover failover fuse loop nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_console virtio_gpu virtio_blk virtio_dma_buf virtio_mmio dm_mirror dm_region_hash dm_log dm_mod xpmem(OE)
CPU: 0 UID: 0 PID: 37589 Comm: python3 Kdump: loaded Tainted: G OE ------- --- 6.12.0-54.el10.aarch64 #1
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : refcount_warn_saturate+0xf4/0x148
lr : refcount_warn_saturate+0xf4/0x148
sp : ffff80008b81b7e0
x29: ffff80008b81b7e0 x28: ffff000133d51600 x27: 0000000000000001
x26: 0000000000000000 x25: 00000000ffffffea x24: ffff00010ae80f00
x23: ffff00010ae80f80 x22: ffff0000c66e5d08 x21: 0000000000000000
x20: ffff0000c66e0000 x19: ffff00010ae80340 x18: 0000000000000006
x17: 0000000000000000 x16: 0000000000000020 x15: ffff80008b81b37f
x14: 0000000000000000 x13: 2e656572662d7265 x12: ffff80008283ef78
x11: ffff80008257efd0 x10: ffff80008283efd0 x9 : ffff80008021ed90
x8 : 0000000000000001 x7 : 00000000000bffe8 x6 : c0000000ffff7fff
x5 : ffff0001fb8e3408 x4 : 0000000000000000 x3 : ffff800179993000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000133d51600
Call trace:
refcount_warn_saturate+0xf4/0x148
mlx5_core_put_rsc+0x88/0xa0 [mlx5_ib]
mlx5_core_destroy_rq_tracked+0x64/0x98 [mlx5_ib]
mlx5_ib_destroy_wq+0x34/0x80 [mlx5_ib]
ib_destroy_wq_user+0x30/0xc0 [ib_core]
uverbs_free_wq+0x28/0x58 [ib_uverbs]
destroy_hw_idr_uobject+0x34/0x78 [ib_uverbs]
uverbs_destroy_uobject+0x48/0x240 [ib_uverbs]
__uverbs_cleanup_ufile+0xd4/0x1a8 [ib_uverbs]
uverbs_destroy_ufile_hw+0x48/0x120 [ib_uverbs]
ib_uverbs_close+0x2c/0x100 [ib_uverbs]
__fput+0xd8/0x2f0
__fput_sync+0x50/0x70
__arm64_sys_close+0x40/0x90
invoke_syscall.constprop.0+0x74/0xd0
do_el0_svc+0x48/0xe8
el0_svc+0x44/0x1d0
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x1a4/0x1a8
Fixes: e2013b212f9f ("net/mlx5_core: Add RQ and SQ event handling")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/3181433ccdd695c63560eeeb3f0c990961732101.1745839855.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Date: Wed May 14 08:36:06 2025 -0400
regulator: dt-bindings: mt6357: Drop fixed compatible requirement
commit 9cfdd7752ba5f8cc9b8191e8c9aeeec246241fa4 upstream.
Some of the regulators on the MT6357 PMIC currently reference the
fixed-regulator dt-binding, which enforces the presence of a
regulator-fixed compatible. However since all regulators on the MT6357
PMIC are handled by a single mt6357-regulator driver, probed through
MFD, the compatibles don't serve any purpose. In fact they cause
failures in the DT kselftest since they aren't probed by the fixed
regulator driver as would be expected. Furthermore this is the only
dt-binding in this family like this: mt6359-regulator and
mt6358-regulator don't require those compatibles.
Commit d77e89b7b03f ("arm64: dts: mediatek: mt6357: Drop regulator-fixed
compatibles") removed the compatibles from Devicetree, but missed
updating the binding, which still requires them, introducing dt-binding
errors. Remove the compatible requirement by referencing the plain
regulator dt-binding instead to fix the dt-binding errors.
Fixes: d77e89b7b03f ("arm64: dts: mediatek: mt6357: Drop regulator-fixed compatibles")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250514-mt6357-regulator-fixed-compatibles-removal-bindings-v1-1-2421e9cc6cc7@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Tue May 27 08:44:14 2025 +0300
regulator: max20086: Fix refcount leak in max20086_parse_regulators_dt()
[ Upstream commit 06118ae36855b7d3d22688298e74a766ccf0cb7a ]
There is a missing call to of_node_put() if devm_kcalloc() fails.
Fix this by changing the code to use cleanup.h magic to drop the
refcount.
Fixes: 6b0cd72757c6 ("regulator: max20086: fix invalid memory access")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVRLqgJWMxYU03G@stanley.mountain
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Siddharth Vadapalli <s-vadapalli@ti.com>
Date: Tue May 13 11:14:35 2025 +0530
remoteproc: k3-r5: Drop check performed in k3_r5_rproc_{mbox_callback/kick}
[ Upstream commit 9995dbfc2235efabdb3759606d522e1a7ec3bdcb ]
Commit f3f11cfe8907 ("remoteproc: k3-r5: Acquire mailbox handle during
probe routine") introduced a check in the "k3_r5_rproc_mbox_callback()"
and "k3_r5_rproc_kick()" callbacks, causing them to exit if the remote
core's state is "RPROC_DETACHED". However, the "__rproc_attach()"
function that is responsible for attaching to a remote core, updates
the state of the remote core to "RPROC_ATTACHED" only after invoking
"rproc_start_subdevices()".
The "rproc_start_subdevices()" function triggers the probe of the Virtio
RPMsg devices associated with the remote core, which require that the
"k3_r5_rproc_kick()" and "k3_r5_rproc_mbox_callback()" callbacks are
functional. Hence, drop the check in the callbacks.
Fixes: f3f11cfe8907 ("remoteproc: k3-r5: Acquire mailbox handle during probe routine")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Wed Apr 2 13:59:51 2025 +0300
remoteproc: qcom_wcnss_iris: Add missing put_device() on error in probe
[ Upstream commit 0cb4b1b97041d8a1f773425208ded253c1cb5869 ]
The device_del() call matches with the device_add() but we also need
to call put_device() to trigger the qcom_iris_release().
Fixes: 1fcef985c8bd ("remoteproc: qcom: wcnss: Fix race with iris probe")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/4604f7e0-3217-4095-b28a-3ff8b5afad3a@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aurabindo Pillai <aurabindo.pillai@amd.com>
Date: Wed May 21 16:05:39 2025 -0400
Revert "drm/amd/display: more liberal vmin/vmax update for freesync"
commit 1b824eef269db44d068bbc0de74c94a8e8f9ce02 upstream.
This reverts commit cfb2d41831ee5647a4ae0ea7c24971a92d5dfa0d since it
causes regressions on certain configs. Revert until the issue can be
isolated and debugged.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4238
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Tue Jun 17 15:32:22 2025 +0200
Revert "io_uring: ensure deferred completions are posted for multishot"
This reverts commit 746e7d285dcb96caa1845fbbb62b14bf4010cdfb which is
commit 687b2bae0efff9b25e071737d6af5004e6e35af5 upstream.
Jens writes:
There's some missing dependencies that makes this not work
right, I'll bring it back in a series instead.
Link: https://lore.kernel.org/r/906ba919-32e6-4534-bbad-2cd18e1098ca@kernel.dk
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Radim Krčmář <rkrcmar@ventanamicro.com>
Date: Fri May 23 12:47:28 2025 +0200
RISC-V: KVM: lock the correct mp_state during reset
[ Upstream commit 7917be170928189fefad490d1a1237fdfa6b856f ]
Currently, the kvm_riscv_vcpu_sbi_system_reset() function locks
vcpu->arch.mp_state_lock when updating tmp->arch.mp_state.mp_state
which is incorrect hence fix it.
Fixes: 2121cadec45a ("RISCV: KVM: Introduce mp_state_lock to avoid lock inversion")
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250523104725.2894546-4-rkrcmar@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Wed Apr 23 20:22:05 2025 +0300
rpmsg: qcom_smd: Fix uninitialized return variable in __qcom_smd_send()
[ Upstream commit 5de775df3362090a6e90046d1f2d83fe62489aa0 ]
The "ret" variable isn't initialized if we don't enter the loop. For
example, if "channel->state" is not SMD_CHANNEL_OPENED.
Fixes: 33e3820dda88 ("rpmsg: smd: Use spinlock in tx path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aAkhvV0nSbrsef1P@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexandre Mergnat <amergnat@baylibre.com>
Date: Mon Apr 28 12:06:48 2025 +0200
rtc: Fix offset calculation for .start_secs < 0
commit fe9f5f96cfe8b82d0f24cbfa93718925560f4f8d upstream.
The comparison
rtc->start_secs > rtc->range_max
has a signed left-hand side and an unsigned right-hand side.
So the comparison might become true for negative start_secs which is
interpreted as a (possibly very large) positive value.
As a negative value can never be bigger than an unsigned value
the correct representation of the (mathematical) comparison
rtc->start_secs > rtc->range_max
in C is:
rtc->start_secs >= 0 && rtc->start_secs > rtc->range_max
Use that to fix the offset calculation currently used in the
rtc-mt6397 driver.
Fixes: 989515647e783 ("rtc: Add one offset seconds to expand RTC range")
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250428-enable-rtc-v4-2-2b2f7e3f9349@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Liu Dalin <liudalin@kylinsec.com.cn>
Date: Fri May 9 16:44:16 2025 +0800
rtc: loongson: Add missing alarm notifications for ACPI RTC events
[ Upstream commit 5af9f1fa576874b24627d4c05e3a84672204c200 ]
When an application sets and enables an alarm on Loongson RTC devices,
the alarm notification fails to propagate to userspace because the
ACPI event handler omits calling rtc_update_irq().
As a result, processes waiting via select() or poll() on RTC device
files fail to receive alarm notifications.
The ACPI interrupt is also triggered multiple times. In loongson_rtc_handler,
we need to clear TOY_MATCH0_REG to resolve this issue.
Fixes: 09471d8f5b39 ("rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr()")
Fixes: 1b733a9ebc3d ("rtc: Add rtc driver for the Loongson family chips")
Signed-off-by: Liu Dalin <liudalin@kylinsec.com.cn>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20250509084416.7979-1-liudalin@kylinsec.com.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexandre Mergnat <amergnat@baylibre.com>
Date: Mon Apr 28 12:06:47 2025 +0200
rtc: Make rtc_time64_to_tm() support dates before 1970
commit 7df4cfef8b351fec3156160bedfc7d6d29de4cce upstream.
Conversion of dates before 1970 is still relevant today because these
dates are reused on some hardwares to store dates bigger than the
maximal date that is representable in the device's native format.
This prominently and very soon affects the hardware covered by the
rtc-mt6397 driver that can only natively store dates in the interval
1900-01-01 up to 2027-12-31. So to store the date 2028-01-01 00:00:00
to such a device, rtc_time64_to_tm() must do the right thing for
time=-2208988800.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250428-enable-rtc-v4-1-2b2f7e3f9349@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Thu Feb 27 14:42:56 2025 +0100
rtc: sh: assign correct interrupts with DT
[ Upstream commit 8f2efdbc303fe7baa83843d3290dd6ea5ba3276c ]
The DT bindings for this driver define the interrupts in the order as
they are numbered in the interrupt controller. The old platform_data,
however, listed them in a different order. So, for DT based platforms,
they are mixed up. Assign them specifically for DT, so we can keep the
bindings stable. After the fix, 'rtctest' passes again on the Renesas
Genmai board (RZ-A1 / R7S72100).
Fixes: dab5aec64bf5 ("rtc: sh: add support for rza series")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250227134256.9167-11-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ilya Leoshkevich <iii@linux.ibm.com>
Date: Mon May 12 14:26:15 2025 +0200
s390/bpf: Store backchain even for leaf progs
[ Upstream commit 5f55f2168432298f5a55294831ab6a76a10cb3c3 ]
Currently a crash in a leaf prog (caused by a bug) produces the
following call trace:
[<000003ff600ebf00>] bpf_prog_6df0139e1fbf2789_fentry+0x20/0x78
[<0000000000000000>] 0x0
This is because leaf progs do not store backchain. Fix by making all
progs do it. This is what GCC and Clang-generated code does as well.
Now the call trace looks like this:
[<000003ff600eb0f2>] bpf_prog_6df0139e1fbf2789_fentry+0x2a/0x80
[<000003ff600ed096>] bpf_trampoline_201863462940+0x96/0xf4
[<000003ff600e3a40>] bpf_prog_05f379658fdd72f2_classifier_0+0x58/0xc0
[<000003ffe0aef070>] bpf_test_run+0x210/0x390
[<000003ffe0af0dc2>] bpf_prog_test_run_skb+0x25a/0x668
[<000003ffe038a90e>] __sys_bpf+0xa46/0xdb0
[<000003ffe038ad0c>] __s390x_sys_bpf+0x44/0x50
[<000003ffe0defea8>] __do_syscall+0x150/0x280
[<000003ffe0e01d5c>] system_call+0x74/0x98
Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250512122717.54878-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sanjeev Yadav <sanjeev.y@mediatek.com>
Date: Fri May 23 13:14:01 2025 -0700
scsi: core: ufs: Fix a hang in the error handler
[ Upstream commit 8a3514d348de87a9d5e2ac00fbac4faae0b97996 ]
ufshcd_err_handling_prepare() calls ufshcd_rpm_get_sync(). The latter
function can only succeed if UFSHCD_EH_IN_PROGRESS is not set because
resuming involves submitting a SCSI command and ufshcd_queuecommand()
returns SCSI_MLQUEUE_HOST_BUSY if UFSHCD_EH_IN_PROGRESS is set. Fix this
hang by setting UFSHCD_EH_IN_PROGRESS after ufshcd_rpm_get_sync() has
been called instead of before.
Backtrace:
__switch_to+0x174/0x338
__schedule+0x600/0x9e4
schedule+0x7c/0xe8
schedule_timeout+0xa4/0x1c8
io_schedule_timeout+0x48/0x70
wait_for_common_io+0xa8/0x160 //waiting on START_STOP
wait_for_completion_io_timeout+0x10/0x20
blk_execute_rq+0xe4/0x1e4
scsi_execute_cmd+0x108/0x244
ufshcd_set_dev_pwr_mode+0xe8/0x250
__ufshcd_wl_resume+0x94/0x354
ufshcd_wl_runtime_resume+0x3c/0x174
scsi_runtime_resume+0x64/0xa4
rpm_resume+0x15c/0xa1c
__pm_runtime_resume+0x4c/0x90 // Runtime resume ongoing
ufshcd_err_handler+0x1a0/0xd08
process_one_work+0x174/0x808
worker_thread+0x15c/0x490
kthread+0xf4/0x1ec
ret_from_fork+0x10/0x20
Signed-off-by: Sanjeev Yadav <sanjeev.y@mediatek.com>
[ bvanassche: rewrote patch description ]
Fixes: 62694735ca95 ("[SCSI] ufs: Add runtime PM support for UFS host controller driver")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250523201409.1676055-1-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yihang Li <liyihang9@huawei.com>
Date: Mon Apr 14 16:08:44 2025 +0800
scsi: hisi_sas: Call I_T_nexus after soft reset for SATA disk
[ Upstream commit e4d953ca557e02edd3aed7390043e1b8ad1c9723 ]
In commit 21c7e972475e ("scsi: hisi_sas: Disable SATA disk phy for severe
I_T nexus reset failure"), if the softreset fails upon certain
conditions, the PHY connected to the disk is disabled directly. Manual
recovery is required, which is inconvenient for users in actual use.
In addition, SATA disks do not support simultaneous connection of multiple
hosts. Therefore, when multiple controllers are connected to a SATA disk
at the same time, the controller which is connected later failed to issue
an ATA softreset to the SATA disk. As a result, the PHY associated with
the disk is disabled and cannot be automatically recovered.
Now that, we will not focus on the execution result of softreset. No
matter whether the execution is successful or not, we will directly carry
out I_T_nexus_reset.
Fixes: 21c7e972475e ("scsi: hisi_sas: Disable SATA disk phy for severe I_T nexus reset failure")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Link: https://lore.kernel.org/r/20250414080845.1220997-4-liyihang9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alok Tiwari <alok.a.tiwari@oracle.com>
Date: Fri May 30 12:29:35 2025 -0700
scsi: iscsi: Fix incorrect error path labels for flashnode operations
[ Upstream commit 9b17621366d210ffee83262a8754086ebbde5e55 ]
Correct the error handling goto labels used when host lookup fails in
various flashnode-related event handlers:
- iscsi_new_flashnode()
- iscsi_del_flashnode()
- iscsi_login_flashnode()
- iscsi_logout_flashnode()
- iscsi_logout_flashnode_sid()
scsi_host_put() is not required when shost is NULL, so jumping to the
correct label avoids unnecessary operations. These functions previously
jumped to the wrong goto label (put_host), which did not match the
intended cleanup logic.
Use the correct exit labels (exit_new_fnode, exit_del_fnode, etc.) to
ensure proper error handling. Also remove the unused put_host label
under iscsi_new_flashnode() as it is no longer needed.
No functional changes beyond accurate error path correction.
Fixes: c6a4bb2ef596 ("[SCSI] scsi_transport_iscsi: Add flash node mgmt support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250530193012.3312911-1-alok.a.tiwari@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <kees@kernel.org>
Date: Fri May 2 15:41:57 2025 -0700
scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops
[ Upstream commit d8720235d5b5cad86c1f07f65117ef2a96f8bec7 ]
Recent fixes to the randstruct GCC plugin allowed it to notice
that this structure is entirely function pointers and is therefore
subject to randomization, but doing so requires that it always use
designated initializers. Explicitly specify the "common" member as being
initialized. Silences:
drivers/scsi/qedf/qedf_main.c:702:9: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]
702 | {
| ^
Fixes: 035f7f87b729 ("randstruct: Enable Clang support")
Link: https://lore.kernel.org/r/20250502224156.work.617-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: ping.gao <ping.gao@samsung.com>
Date: Fri May 16 16:38:12 2025 +0800
scsi: ufs: mcq: Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort()
[ Upstream commit 53755903b9357e69b2dd6a02fafbb1e30c741895 ]
After UFS_ABORT_TASK has been processed successfully, the host will
generate MCQ IRQ for ABORT TAG with response OCS_ABORTED. This results in
ufshcd_compl_one_cqe() calling ufshcd_release_scsi_cmd().
But ufshcd_mcq_abort() already calls ufshcd_release_scsi_cmd(), resulting
in __ufshcd_release() being called twice. This means
hba->clk_gating.active_reqs will be decreased twice, making it go
negative.
Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort().
Fixes: f1304d442077 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()")
Signed-off-by: ping.gao <ping.gao@samsung.com>
Link: https://lore.kernel.org/r/20250516083812.3894396-1-ping.gao@samsung.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nitin Rawat <quic_nitirawa@quicinc.com>
Date: Mon May 26 21:08:12 2025 +0530
scsi: ufs: qcom: Prevent calling phy_exit() before phy_init()
[ Upstream commit 7831003165d37ecb7b33843fcee05cada0359a82 ]
Prevent calling phy_exit() before phy_init() to avoid abnormal power
count and the following warning during boot up.
[5.146763] phy phy-1d80000.phy.0: phy_power_on was called before phy_init
Fixes: 7bac65687510 ("scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()")
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250526153821.7918-2-quic_nitirawa@quicinc.com
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ido Schimmel <idosch@nvidia.com>
Date: Wed Jun 4 14:32:52 2025 +0300
seg6: Fix validation of nexthop addresses
[ Upstream commit 7632fedb266d93ed0ed9f487133e6c6314a9b2d1 ]
The kernel currently validates that the length of the provided nexthop
address does not exceed the specified length. This can lead to the
kernel reading uninitialized memory if user space provided a shorter
length than the specified one.
Fix by validating that the provided length exactly matches the specified
one.
Fixes: d1df6fd8a1d2 ("ipv6: sr: define core operations for seg6local lightweight tunnel")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250604113252.371528-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Date: Wed Apr 9 15:26:33 2025 +0530
selftests/bpf: Fix bpf_nf selftest failure
[ Upstream commit 967e8def1100cb4b08c28a54d27ce69563fdf281 ]
For systems with missing iptables-legacy tool this selftest fails.
Add check to find if iptables-legacy tool is available and skip the
test if the tool is missing.
Fixes: de9c8d848d90 ("selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250409095633.33653-1-skb99@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Neill Kapron <nkapron@google.com>
Date: Sun Apr 27 09:40:58 2025 +0000
selftests/seccomp: fix syscall_restart test for arm compat
[ Upstream commit 797002deed03491215a352ace891749b39741b69 ]
The inconsistencies in the systcall ABI between arm and arm-compat can
can cause a failure in the syscall_restart test due to the logic
attempting to work around the differences. The 'machine' field for an
ARM64 device running in compat mode can report 'armv8l' or 'armv8b'
which matches with the string 'arm' when only examining the first three
characters of the string.
This change adds additional validation to the workaround logic to make
sure we only take the arm path when running natively, not in arm-compat.
Fixes: 256d0afb11d6 ("selftests/seccomp: build and pass on arm64")
Signed-off-by: Neill Kapron <nkapron@google.com>
Link: https://lore.kernel.org/r/20250427094103.3488304-2-nkapron@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Henry Martin <bsdhenrymartin@gmail.com>
Date: Thu Apr 3 15:03:39 2025 +0800
serial: Fix potential null-ptr-deref in mlb_usio_probe()
[ Upstream commit 86bcae88c9209e334b2f8c252f4cc66beb261886 ]
devm_ioremap() can return NULL on error. Currently, mlb_usio_probe()
does not check for this case, which could result in a NULL pointer
dereference.
Add NULL check after devm_ioremap() to prevent this issue.
Fixes: ba44dc043004 ("serial: Add Milbeaut serial control")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://lore.kernel.org/r/20250403070339.64990-1-bsdhenrymartin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dustin Lundquist <dustin@null-ptr.net>
Date: Tue May 6 11:18:45 2025 -0700
serial: jsm: fix NPE during jsm_uart_port_init
commit e3975aa899c0a3bbc10d035e699b142cd1373a71 upstream.
No device was set which caused serial_base_ctrl_add to crash.
BUG: kernel NULL pointer dereference, address: 0000000000000050
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1 Debian 6.12.25-1
RIP: 0010:serial_base_ctrl_add+0x96/0x120
Call Trace:
<TASK>
serial_core_register_port+0x1a0/0x580
? __setup_irq+0x39c/0x660
? __kmalloc_cache_noprof+0x111/0x310
jsm_uart_port_init+0xe8/0x180 [jsm]
jsm_probe_one+0x1f4/0x410 [jsm]
local_pci_probe+0x42/0x90
pci_device_probe+0x22f/0x270
really_probe+0xdb/0x340
? pm_runtime_barrier+0x54/0x90
? __pfx___driver_attach+0x10/0x10
__driver_probe_device+0x78/0x110
driver_probe_device+0x1f/0xa0
__driver_attach+0xba/0x1c0
bus_for_each_dev+0x8c/0xe0
bus_add_driver+0x112/0x1f0
driver_register+0x72/0xd0
jsm_init_module+0x36/0xff0 [jsm]
? __pfx_jsm_init_module+0x10/0x10 [jsm]
do_one_initcall+0x58/0x310
do_init_module+0x60/0x230
Tested with Digi Neo PCIe 8 port card.
Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Cc: stable <stable@kernel.org>
Signed-off-by: Dustin Lundquist <dustin@null-ptr.net>
Link: https://lore.kernel.org/r/3f31d4f75863614655c4673027a208be78d022ec.camel@null-ptr.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Date: Wed Jun 11 08:05:49 2025 +0300
serial: sh-sci: Check if TX data was written to device in .tx_empty()
commit 7cc0e0a43a91052477c2921f924a37d9c3891f0c upstream.
On the Renesas RZ/G3S, when doing suspend to RAM, the uart_suspend_port()
is called. The uart_suspend_port() calls 3 times the
struct uart_port::ops::tx_empty() before shutting down the port.
According to the documentation, the struct uart_port::ops::tx_empty()
API tests whether the transmitter FIFO and shifter for the port is
empty.
The Renesas RZ/G3S SCIFA IP reports the number of data units stored in the
transmit FIFO through the FDR (FIFO Data Count Register). The data units
in the FIFOs are written in the shift register and transmitted from there.
The TEND bit in the Serial Status Register reports if the data was
transmitted from the shift register.
In the previous code, in the tx_empty() API implemented by the sh-sci
driver, it is considered that the TX is empty if the hardware reports the
TEND bit set and the number of data units in the FIFO is zero.
According to the HW manual, the TEND bit has the following meaning:
0: Transmission is in the waiting state or in progress.
1: Transmission is completed.
It has been noticed that when opening the serial device w/o using it and
then switch to a power saving mode, the tx_empty() call in the
uart_port_suspend() function fails, leading to the "Unable to drain
transmitter" message being printed on the console. This is because the
TEND=0 if nothing has been transmitted and the FIFOs are empty. As the
TEND=0 has double meaning (waiting state, in progress) we can't
determined the scenario described above.
Add a software workaround for this. This sets a variable if any data has
been sent on the serial console (when using PIO) or if the DMA callback has
been called (meaning something has been transmitted). In the tx_empty()
API the status of the DMA transaction is also checked and if it is
completed or in progress the code falls back in checking the hardware
registers instead of relying on the software variable.
Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241125115856.513642-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[claudiu.beznea: fixed conflict by:
- keeping serial_port_out() instead of sci_port_out() in
sci_transmit_chars()
- keeping !uart_circ_empty(xmit) condition in sci_dma_tx_complete(),
after s->tx_occurred = true; assignement]
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Date: Wed Jun 11 08:05:51 2025 +0300
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
commit 5f1017069933489add0c08659673443c9905659e upstream.
The early_console_setup() function initializes sci_ports[0].port with an
object of type struct uart_port obtained from the struct earlycon_device
passed as an argument to early_console_setup().
Later, during serial port probing, the serial port used as earlycon
(e.g., port A) might be remapped to a different position in the sci_ports[]
array, and a different serial port (e.g., port B) might be assigned to slot
0. For example:
sci_ports[0] = port B
sci_ports[X] = port A
In this scenario, the new port mapped at index zero (port B) retains the
data associated with the earlycon configuration. Consequently, after the
Linux boot process, any access to the serial port now mapped to
sci_ports[0] (port B) will block the original earlycon port (port A).
To address this, introduce an early_console_exit() function to clean up
sci_ports[0] when earlycon is exited.
To prevent the cleanup of sci_ports[0] while the serial device is still
being used by earlycon, introduce the struct sci_port::probing flag and
account for it in early_console_exit().
Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250116182249.3828577-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Date: Wed Jun 11 08:05:50 2025 +0300
serial: sh-sci: Move runtime PM enable to sci_probe_single()
commit 239f11209e5f282e16f5241b99256e25dd0614b6 upstream.
Relocate the runtime PM enable operation to sci_probe_single(). This change
prepares the codebase for upcoming fixes.
While at it, replace the existing logic with a direct call to
devm_pm_runtime_enable() and remove sci_cleanup_single(). The
devm_pm_runtime_enable() function automatically handles disabling runtime
PM during driver removal.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250116182249.3828577-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Henry Martin <bsdhenrymartin@gmail.com>
Date: Thu May 15 16:00:44 2025 +0930
soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
[ Upstream commit f1706e0e1a74b095cbc60375b9b1e6205f5f4c98 ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
aspeed_lpc_enable_snoop() does not check for this case, which results in a
NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250401074647.21300-1-bsdhenrymartin@gmail.com
[arj: Fix Fixes: tag to use subject from 3772e5da4454]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Su Hui <suhui@nfschina.com>
Date: Thu May 15 16:00:43 2025 +0930
soc: aspeed: lpc: Fix impossible judgment condition
[ Upstream commit d9f0a97e859bdcef51f9c187b1eb712eb13fd3ff ]
smatch error：
drivers/soc/aspeed/aspeed-lpc-snoop.c:169
aspeed_lpc_snoop_config_irq() warn: platform_get_irq() does not return zero
platform_get_irq() return non-zero IRQ number or negative error code,
change '!lpc_snoop->irq' to 'lpc_snoop->irq < 0' to fix this.
Fixes: 9f4f9ae81d0a ("drivers/misc: add Aspeed LPC snoop driver")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20231027020703.1231875-1-suhui@nfschina.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Álvaro Fernández Rojas <noltari@gmail.com>
Date: Thu May 29 15:09:15 2025 +0200
spi: bcm63xx-hsspi: fix shared reset
[ Upstream commit 3d6d84c8f2f66d3fd6a43a1e2ce8e6b54c573960 ]
Some bmips SoCs (bcm6362, bcm63268) share the same SPI reset for both SPI
and HSSPI controllers, so reset shouldn't be exclusive.
Fixes: 0eeadddbf09a ("spi: bcm63xx-hsspi: add reset support")
Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250529130915.2519590-3-noltari@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Álvaro Fernández Rojas <noltari@gmail.com>
Date: Thu May 29 15:09:14 2025 +0200
spi: bcm63xx-spi: fix shared reset
[ Upstream commit 5ad20e3d8cfe3b2e42bbddc7e0ebaa74479bb589 ]
Some bmips SoCs (bcm6362, bcm63268) share the same SPI reset for both SPI
and HSSPI controllers, so reset shouldn't be exclusive.
Fixes: 38807adeaf1e ("spi: bcm63xx-spi: add reset support")
Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250529130915.2519590-2-noltari@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Fri May 16 15:32:06 2025 +0200
spi: sh-msiof: Fix maximum DMA transfer size
[ Upstream commit 0941d5166629cb766000530945e54b4e49680c68 ]
The maximum amount of data to transfer in a single DMA request is
calculated from the FIFO sizes (which is technically not 100% correct,
but a simplification, as it is limited by the maximum word count values
in the Transmit and Control Data Registers). However, in case there is
both data to transmit and to receive, the transmit limit is overwritten
by the receive limit.
Fix this by using the minimum applicable FIFO size instead. Move the
calculation outside the loop, so it is not repeated for each individual
DMA transfer.
As currently tx_fifo_size is always equal to rx_fifo_size, this bug had
no real impact.
Fixes: fe78d0b7691c0274 ("spi: sh-msiof: Fix FIFO size to 64 word from 256 word")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/d9961767a97758b2614f2ee8afe1bd56dc900a60.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vishwaroop A <va@nvidia.com>
Date: Wed Apr 16 11:06:01 2025 +0000
spi: tegra210-quad: Fix X1_X2_X4 encoding and support x4 transfers
[ Upstream commit dcb06c638a1174008a985849fa30fc0da7d08904 ]
This patch corrects the QSPI_COMMAND_X1_X2_X4 and QSPI_ADDRESS_X1_X2_X4
macros to properly encode the bus width for x1, x2, and x4 transfers.
Although these macros were previously incorrect, they were not being
used in the driver, so no functionality was affected.
The patch updates tegra_qspi_cmd_config() and tegra_qspi_addr_config()
function calls to use the actual bus width from the transfer, instead of
hardcoding it to 0 (which implied x1 mode). This change enables proper
support for x1, x2, and x4 data transfers by correctly configuring the
interface width for commands and addresses.
These modifications improve the QSPI driver's flexibility and prepare it
for future use cases that may require different bus widths for commands
and addresses.
Fixes: 1b8342cc4a38 ("spi: tegra210-quad: combined sequence mode")
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20250416110606.2737315-2-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vishwaroop A <va@nvidia.com>
Date: Wed Apr 16 11:06:03 2025 +0000
spi: tegra210-quad: modify chip select (CS) deactivation
[ Upstream commit d8966b65413390d1b5b706886987caac05fbe024 ]
Modify the chip select (CS) deactivation and inter-transfer delay
execution only during the DATA_TRANSFER phase when the cs_change
flag is not set. This ensures proper CS handling and timing between
transfers while eliminating redundant operations.
Fixes: 1b8342cc4a38 ("spi: tegra210-quad: combined sequence mode")
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20250416110606.2737315-4-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vishwaroop A <va@nvidia.com>
Date: Wed Apr 16 11:06:02 2025 +0000
spi: tegra210-quad: remove redundant error handling code
[ Upstream commit 400d9f1a27cc2fceabdb1ed93eaf0b89b6d32ba5 ]
Remove unnecessary error handling code that terminated transfers and
executed delay on errors. This code was redundant as error handling is
already done at a higher level in the SPI core.
Fixes: 1b8342cc4a38 ("spi: tegra210-quad: combined sequence mode")
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20250416110606.2737315-3-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Phillip Lougher <phillip@squashfs.org.uk>
Date: Wed Apr 9 03:47:47 2025 +0100
Squashfs: check return result of sb_min_blocksize
[ Upstream commit 734aa85390ea693bb7eaf2240623d41b03705c84 ]
Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug.
Syzkaller forks multiple processes which after mounting the Squashfs
filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000).
Now if this ioctl occurs at the same time another process is in the
process of mounting a Squashfs filesystem on /dev/loop0, the failure
occurs. When this happens the following code in squashfs_fill_super()
fails.
----
msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE);
msblk->devblksize_log2 = ffz(~msblk->devblksize);
----
sb_min_blocksize() returns 0, which means msblk->devblksize is set to 0.
As a result, ffz(~msblk->devblksize) returns 64, and msblk->devblksize_log2
is set to 64.
This subsequently causes the
UBSAN: shift-out-of-bounds in fs/squashfs/block.c:195:36
shift exponent 64 is too large for 64-bit type 'u64' (aka
'unsigned long long')
This commit adds a check for a 0 return by sb_min_blocksize().
Link: https://lkml.kernel.org/r/20250409024747.876480-1-phillip@squashfs.org.uk
Fixes: 0aa666190509 ("Squashfs: super block operations")
Reported-by: syzbot+65761fc25a137b9c8c6e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67f0dd7a.050a0220.0a13.0230.GAE@google.com/
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sergey Senozhatsky <senozhatsky@chromium.org>
Date: Fri Mar 28 00:03:50 2025 +0900
thunderbolt: Do not double dequeue a configuration request
commit 0f73628e9da1ee39daf5f188190cdbaee5e0c98c upstream.
Some of our devices crash in tb_cfg_request_dequeue():
general protection fault, probably for non-canonical address 0xdead000000000122
CPU: 6 PID: 91007 Comm: kworker/6:2 Tainted: G U W 6.6.65
RIP: 0010:tb_cfg_request_dequeue+0x2d/0xa0
Call Trace:
<TASK>
? tb_cfg_request_dequeue+0x2d/0xa0
tb_cfg_request_work+0x33/0x80
worker_thread+0x386/0x8f0
kthread+0xed/0x110
ret_from_fork+0x38/0x50
ret_from_fork_asm+0x1b/0x30
The circumstances are unclear, however, the theory is that
tb_cfg_request_work() can be scheduled twice for a request:
first time via frame.callback from ring_work() and second
time from tb_cfg_request(). Both times kworkers will execute
tb_cfg_request_dequeue(), which results in double list_del()
from the ctl->request_queue (the list poison deference hints
at it: 0xdead000000000122).
Do not dequeue requests that don't have TB_CFG_REQUEST_ACTIVE
bit set.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Fri Apr 11 10:14:44 2025 -0500
thunderbolt: Fix a logic error in wake on connect
[ Upstream commit 1a760d10ded372d113a0410c42be246315bbc2ff ]
commit a5cfc9d65879c ("thunderbolt: Add wake on connect/disconnect
on USB4 ports") introduced a sysfs file to control wake up policy
for a given USB4 port that defaulted to disabled.
However when testing commit 4bfeea6ec1c02 ("thunderbolt: Use wake
on connect and disconnect over suspend") I found that it was working
even without making changes to the power/wakeup file (which defaults
to disabled). This is because of a logic error doing a bitwise or
of the wake-on-connect flag with device_may_wakeup() which should
have been a logical AND.
Adjust the logic so that policy is only applied when wakeup is
actually enabled.
Fixes: a5cfc9d65879c ("thunderbolt: Add wake on connect/disconnect on USB4 ports")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Suleiman Souhlal <suleiman@google.com>
Date: Fri Jun 6 16:45:38 2025 +0900
tools/resolve_btfids: Fix build when cross compiling kernel with clang.
commit a298bbab903e3fb4cbe16d36d6195e68fad1b776 upstream.
When cross compiling the kernel with clang, we need to override
CLANG_CROSS_FLAGS when preparing the step libraries.
Prior to commit d1d096312176 ("tools: fix annoying "mkdir -p ..." logs
when building tools in parallel"), MAKEFLAGS would have been set to a
value that wouldn't set a value for CLANG_CROSS_FLAGS, hiding the
fact that we weren't properly overriding it.
Fixes: 56a2df7615fa ("tools/resolve_btfids: Compile resolve_btfids as host program")
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20250606074538.1608546-1-suleiman@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ahmed S. Darwish <darwi@linutronix.de>
Date: Mon Mar 24 15:20:22 2025 +0100
tools/x86/kcpuid: Fix error handling
[ Upstream commit 116edfe173d0c59ec2aa87fb91f2f31d477b61b3 ]
Error handling in kcpuid is unreliable. On malloc() failures, the code
prints an error then just goes on. The error messages are also printed
to standard output instead of standard error.
Use err() and errx() from <err.h> to direct all error messages to
standard error and automatically exit the program. Use err() to include
the errno information, and errx() otherwise. Use warnx() for warnings.
While at it, alphabetically reorder the header includes.
[ mingo: Fix capitalization in the help text while at it. ]
Fixes: c6b2f240bf8d ("tools/x86: Add a kcpuid tool to show raw CPU features")
Reported-by: Remington Brasga <rbrasga@uci.edu>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250324142042.29010-2-darwi@linutronix.de
Closes: https://lkml.kernel.org/r/20240926223557.2048-1-rbrasga@uci.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pan Taixi <pantaixi@huaweicloud.com>
Date: Mon May 26 09:37:31 2025 +0800
tracing: Fix compilation warning on arm32
commit 2fbdb6d8e03b70668c0876e635506540ae92ab05 upstream.
On arm32, size_t is defined to be unsigned int, while PAGE_SIZE is
unsigned long. This hence triggers a compilation warning as min()
asserts the type of two operands to be equal. Casting PAGE_SIZE to size_t
solves this issue and works on other target architectures as well.
Compilation warning details:
kernel/trace/trace.c: In function 'tracing_splice_read_pipe':
./include/linux/minmax.h:20:28: warning: comparison of distinct pointer types lacks a cast
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^
./include/linux/minmax.h:26:4: note: in expansion of macro '__typecheck'
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~
...
kernel/trace/trace.c:6771:8: note: in expansion of macro 'min'
min((size_t)trace_seq_used(&iter->seq),
^~~
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250526013731.1198030-1-pantaixi@huaweicloud.com
Fixes: f5178c41bb43 ("tracing: Fix oob write in trace_seq_to_buffer()")
Reviewed-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Pan Taixi <pantaixi@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Wed May 7 10:53:07 2025 -0400
tracing: Fix error handling in event_trigger_parse()
[ Upstream commit c5dd28e7fb4f63475b50df4f58311df92939d011 ]
According to trigger_data_alloc() doc, trigger_data_free() should be
used to free an event_trigger_data object. This fixes a mismatch introduced
when kzalloc was replaced with trigger_data_alloc without updating
the corresponding deallocation calls.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250507145455.944453325@goodmis.org
Link: https://lore.kernel.org/20250318112737.4174-1-linmq006@gmail.com
Fixes: e1f187d09e11 ("tracing: Have existing event_command.parse() implementations use helpers")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
[ SDR: Changed event_trigger_alloc/free() to trigger_data_alloc/free() ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Steven Rostedt <rostedt@goodmis.org>
Date: Mon Apr 7 12:38:51 2025 -0400
tracing: Move histogram trigger variables from stack to per CPU structure
[ Upstream commit 7ab0fc61ce73040f89b12d76a8279995ec283541 ]
The histogram trigger has three somewhat large arrays on the kernel stack:
unsigned long entries[HIST_STACKTRACE_DEPTH];
u64 var_ref_vals[TRACING_MAP_VARS_MAX];
char compound_key[HIST_KEY_SIZE_MAX];
Checking the function event_hist_trigger() stack frame size, it currently
uses 816 bytes for its stack frame due to these variables!
Instead, allocate a per CPU structure that holds these arrays for each
context level (normal, softirq, irq and NMI). That is, each CPU will have
4 of these structures. This will be allocated when the first histogram
trigger is enabled and freed when the last is disabled. When the
histogram callback triggers, it will request this structure. The request
will disable preemption, get the per CPU structure at the index of the
per CPU variable, and increment that variable.
The callback will use the arrays in this structure to perform its work and
then release the structure. That in turn will simply decrement the per CPU
index and enable preemption.
Moving the variables from the kernel stack to the per CPU structure brings
the stack frame of event_hist_trigger() down to just 112 bytes.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250407123851.74ea8d58@gandalf.local.home
Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Steven Rostedt <rostedt@goodmis.org>
Date: Wed May 7 10:53:06 2025 -0400
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
[ Upstream commit f2947c4b7d0f235621c5daf78aecfbd6e22c05e5 ]
The function event_trigger_alloc() creates an event_trigger_data
descriptor and states that it needs to be freed via event_trigger_free().
This is incorrect, it needs to be freed by trigger_data_free() as
event_trigger_free() adds ref counting.
Rename event_trigger_alloc() to trigger_data_alloc() and state that it
needs to be freed via trigger_data_free(). This naming convention
was introducing bugs.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250507145455.776436410@goodmis.org
Fixes: 86599dbe2c527 ("tracing: Add helper functions to simplify event_command.parse() callback handling")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pawel Laszczak <pawell@cadence.com>
Date: Tue May 13 05:30:09 2025 +0000
usb: cdnsp: Fix issue with detecting command completion event
commit f4ecdc352646f7d23f348e5c544dbe3212c94fc8 upstream.
In some cases, there is a small-time gap in which CMD_RING_BUSY can be
cleared by controller but adding command completion event to event ring
will be delayed. As the result driver will return error code.
This behavior has been detected on usbtest driver (test 9) with
configuration including ep1in/ep1out bulk and ep2in/ep2out isoc
endpoint.
Probably this gap occurred because controller was busy with adding some
other events to event ring.
The CMD_RING_BUSY is cleared to '0' when the Command Descriptor has been
executed and not when command completion event has been added to event
ring.
To fix this issue for this test the small delay is sufficient less than
10us) but to make sure the problem doesn't happen again in the future
the patch introduces 10 retries to check with delay about 20us before
returning error code.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB9538AA45362ACCF1B94EE9B7DD96A@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pawel Laszczak <pawell@cadence.com>
Date: Tue May 13 06:54:03 2025 +0000
usb: cdnsp: Fix issue with detecting USB 3.2 speed
commit 2852788cfbe9ca1ab68509d65804413871f741f9 upstream.
Patch adds support for detecting SuperSpeedPlus Gen1 x2 and
SuperSpeedPlus Gen2 x2 speed.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB95387AD98EDCA695FECE52BADD96A@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mathias Nyman <mathias.nyman@linux.intel.com>
Date: Wed May 14 16:25:20 2025 +0300
usb: Flush altsetting 0 endpoints before reinitializating them after reset.
commit 89bb3dc13ac29a563f4e4c555e422882f64742bd upstream.
usb core avoids sending a Set-Interface altsetting 0 request after device
reset, and instead relies on calling usb_disable_interface() and
usb_enable_interface() to flush and reset host-side of those endpoints.
xHCI hosts allocate and set up endpoint ring buffers and host_ep->hcpriv
during usb_hcd_alloc_bandwidth() callback, which in this case is called
before flushing the endpoint in usb_disable_interface().
Call usb_disable_interface() before usb_hcd_alloc_bandwidth() to ensure
URBs are flushed before new ring buffers for the endpoints are allocated.
Otherwise host driver will attempt to find and remove old stale URBs
from a freshly allocated new ringbuffer.
Cc: stable <stable@kernel.org>
Fixes: 4fe0387afa89 ("USB: don't send Set-Interface after reset")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250514132520.225345-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiayi Li <lijiayi@kylinos.cn>
Date: Thu May 8 13:59:47 2025 +0800
usb: quirks: Add NO_LPM quirk for SanDisk Extreme 55AE
commit 19f795591947596b5b9efa86fd4b9058e45786e9 upstream.
This device exhibits I/O errors during file transfers due to unstable
link power management (LPM) behavior. The kernel logs show repeated
warm resets and eventual disconnection when LPM is enabled:
[ 3467.810740] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020
[ 3467.810740] usb usb2-port5: do warm reset
[ 3467.866444] usb usb2-port5: not warm reset yet, waiting 50ms
[ 3467.907407] sd 0:0:0:0: [sda] tag#12 sense submit err -19
[ 3467.994423] usb usb2-port5: status 02c0, change 0001, 10.0 Gb/s
[ 3467.994453] usb 2-5: USB disconnect, device number 4
The error -19 (ENODEV) occurs when the device disappears during write
operations. Adding USB_QUIRK_NO_LPM disables link power management
for this specific device, resolving the stability issues.
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250508055947.764538-1-lijiayi@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Mon Apr 7 11:50:02 2025 +0100
usb: renesas_usbhs: Reorder clock handling and power management in probe
[ Upstream commit ffb34a60ce86656ba12d46e91f1ccc71dd221251 ]
Reorder the initialization sequence in `usbhs_probe()` to enable runtime
PM before accessing registers, preventing potential crashes due to
uninitialized clocks.
Currently, in the probe path, registers are accessed before enabling the
clocks, leading to a synchronous external abort on the RZ/V2H SoC.
The problematic call flow is as follows:
usbhs_probe()
usbhs_sys_clock_ctrl()
usbhs_bset()
usbhs_write()
iowrite16() <-- Register access before enabling clocks
Since `iowrite16()` is performed without ensuring the required clocks are
enabled, this can lead to access errors. To fix this, enable PM runtime
early in the probe function and ensure clocks are acquired before register
access, preventing crashes like the following on RZ/V2H:
[13.272640] Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP
[13.280814] Modules linked in: cec renesas_usbhs(+) drm_kms_helper fuse drm backlight ipv6
[13.289088] CPU: 1 UID: 0 PID: 195 Comm: (udev-worker) Not tainted 6.14.0-rc7+ #98
[13.296640] Hardware name: Renesas RZ/V2H EVK Board based on r9a09g057h44 (DT)
[13.303834] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[13.310770] pc : usbhs_bset+0x14/0x4c [renesas_usbhs]
[13.315831] lr : usbhs_probe+0x2e4/0x5ac [renesas_usbhs]
[13.321138] sp : ffff8000827e3850
[13.324438] x29: ffff8000827e3860 x28: 0000000000000000 x27: ffff8000827e3ca0
[13.331554] x26: ffff8000827e3ba0 x25: ffff800081729668 x24: 0000000000000025
[13.338670] x23: ffff0000c0f08000 x22: 0000000000000000 x21: ffff0000c0f08010
[13.345783] x20: 0000000000000000 x19: ffff0000c3b52080 x18: 00000000ffffffff
[13.352895] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000827e36ce
[13.360009] x14: 00000000000003d7 x13: 00000000000003d7 x12: 0000000000000000
[13.367122] x11: 0000000000000000 x10: 0000000000000aa0 x9 : ffff8000827e3750
[13.374235] x8 : ffff0000c1850b00 x7 : 0000000003826060 x6 : 000000000000001c
[13.381347] x5 : 000000030d5fcc00 x4 : ffff8000825c0000 x3 : 0000000000000000
[13.388459] x2 : 0000000000000400 x1 : 0000000000000000 x0 : ffff0000c3b52080
[13.395574] Call trace:
[13.398013] usbhs_bset+0x14/0x4c [renesas_usbhs] (P)
[13.403076] platform_probe+0x68/0xdc
[13.406738] really_probe+0xbc/0x2c0
[13.410306] __driver_probe_device+0x78/0x120
[13.414653] driver_probe_device+0x3c/0x154
[13.418825] __driver_attach+0x90/0x1a0
[13.422647] bus_for_each_dev+0x7c/0xe0
[13.426470] driver_attach+0x24/0x30
[13.430032] bus_add_driver+0xe4/0x208
[13.433766] driver_register+0x68/0x130
[13.437587] __platform_driver_register+0x24/0x30
[13.442273] renesas_usbhs_driver_init+0x20/0x1000 [renesas_usbhs]
[13.448450] do_one_initcall+0x60/0x1d4
[13.452276] do_init_module+0x54/0x1f8
[13.456014] load_module+0x1754/0x1c98
[13.459750] init_module_from_file+0x88/0xcc
[13.464004] __arm64_sys_finit_module+0x1c4/0x328
[13.468689] invoke_syscall+0x48/0x104
[13.472426] el0_svc_common.constprop.0+0xc0/0xe0
[13.477113] do_el0_svc+0x1c/0x28
[13.480415] el0_svc+0x30/0xcc
[13.483460] el0t_64_sync_handler+0x10c/0x138
[13.487800] el0t_64_sync+0x198/0x19c
[13.491453] Code: 2a0103e1 12003c42 12003c63 8b010084 (79400084)
[13.497522] ---[ end trace 0000000000000000 ]---
Fixes: f1407d5c66240 ("usb: renesas_usbhs: Add Renesas USBHS common code")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20250407105002.107181-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Charles Yeh <charlesyeh522@gmail.com>
Date: Wed May 21 21:23:54 2025 +0800
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
commit d3a889482bd5abf2bbdc1ec3d2d49575aa160c9c upstream.
Add new bcd (0x905) to support PL2303GT-2AB (TYPE_HXN).
Add new bcd (0x1005) to support PL2303GC-Q20 (TYPE_HXN).
Signed-off-by: Charles Yeh <charlesyeh522@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hongyu Xie <xiehongyu1@kylinos.cn>
Date: Mon May 19 10:33:28 2025 +0800
usb: storage: Ignore UAS driver for SanDisk 3.2 Gen2 storage device
commit a541acceedf4f639f928f41fbb676b75946dc295 upstream.
SanDisk 3.2 Gen2 storage device(0781:55e8) doesn't work well with UAS.
Log says,
[ 6.507865][ 3] [ T159] usb 2-1.4: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[ 6.540314][ 3] [ T159] usb 2-1.4: New USB device found, idVendor=0781, idProduct=55e8, bcdDevice= 0.01
[ 6.576304][ 3] [ T159] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.584727][ 3] [ T159] usb 2-1.4: Product: SanDisk 3.2 Gen2
[ 6.590459][ 3] [ T159] usb 2-1.4: Manufacturer: SanDisk
[ 6.595845][ 3] [ T159] usb 2-1.4: SerialNumber: 03021707022525140940
[ 7.230852][ 0] [ T265] usbcore: registered new interface driver usb-storage
[ 7.251247][ 0] [ T265] scsi host3: uas
[ 7.255280][ 0] [ T265] usbcore: registered new interface driver uas
[ 7.270498][ 1] [ T192] scsi 3:0:0:0: Direct-Access SanDisk Extreme Pro DDE1 0110 PQ: 0 ANSI: 6
[ 7.299588][ 3] [ T192] scsi 3:0:0:1: Enclosure SanDisk SES Device 0110 PQ: 0 ANSI: 6
[ 7.321681][ 3] [ T192] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 7.328185][ 3] [ T192] scsi 3:0:0:1: Attached scsi generic sg2 type 13
[ 7.328804][ 0] [ T191] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 7.343486][ 0] [ T191] sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 7.364611][ 0] [ T191] sd 3:0:0:0: [sda] Write Protect is off
[ 7.370524][ 0] [ T191] sd 3:0:0:0: [sda] Mode Sense: 3d 00 10 00
[ 7.390655][ 0] [ T191] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 7.401363][ 0] [ T191] sd 3:0:0:0: [sda] Optimal transfer size 1048576 bytes
[ 7.436010][ 0] [ T191] sda: sda1
[ 7.450850][ 0] [ T191] sd 3:0:0:0: [sda] Attached SCSI disk
[ 7.470218][ 4] [ T262] scsi 3:0:0:1: Failed to get diagnostic page 0x1
[ 7.474869][ 0] [ C0] sd 3:0:0:0: [sda] tag#0 data cmplt err -75 uas-tag 2 inflight: CMD
[ 7.476911][ 4] [ T262] scsi 3:0:0:1: Failed to bind enclosure -19
[ 7.485330][ 0] [ C0] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 28 00 00 10 00
[ 7.491593][ 4] [ T262] ses 3:0:0:1: Attached Enclosure device
[ 38.066980][ 4] [ T192] sd 3:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN
[ 38.076012][ 4] [ T192] sd 3:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 00 00 01 08 00 00 f8 00
[ 38.086485][ 4] [ T192] sd 3:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 38.095515][ 4] [ T192] sd 3:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 10 00 00 08 00
[ 38.104122][ 4] [ T192] sd 3:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN
[ 38.113152][ 4] [ T192] sd 3:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 00 00 00 88 00 00 78 00
[ 38.121761][ 4] [ T192] sd 3:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
[ 38.130791][ 4] [ T192] sd 3:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 00 00 00 48 00 00 30 00
[ 38.139401][ 4] [ T192] sd 3:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD
[ 38.148170][ 4] [ T192] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 28 00 00 10 00
[ 38.178980][ 2] [ T304] scsi host3: uas_eh_device_reset_handler start
[ 38.901540][ 2] [ T304] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[ 38.936791][ 2] [ T304] scsi host3: uas_eh_device_reset_handler success
Device decriptor is below,
Bus 002 Device 006: ID 0781:55e8 SanDisk Corp. SanDisk 3.2 Gen2
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x0781 SanDisk Corp.
idProduct 0x55e8
bcdDevice 0.01
iManufacturer 1 SanDisk
iProduct 2 SanDisk 3.2 Gen2
iSerial 3 03021707022525140940
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0079
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 896mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Command pipe (0x01)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-out pipe (0x04)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x002a
bNumDeviceCaps 3
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x0000f41e
BESL Link Power Management (LPM) Supported
BESL value 1024 us
Deep BESL value 61440 us
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
SuperSpeedPlus USB Device Capability:
bLength 20
bDescriptorType 16
bDevCapabilityType 10
bmAttributes 0x00000001
Sublink Speed Attribute count 1
Sublink Speed ID count 0
wFunctionalitySupport 0x1100
bmSublinkSpeedAttr[0] 0x000a4030
Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus
bmSublinkSpeedAttr[1] 0x000a40b0
Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus
Device Status: 0x0000
(Bus Powered)
So ignore UAS driver for this device.
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250519023328.1498856-1-xiehongyu1@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Amit Sunil Dhamne <amitsd@google.com>
Date: Fri May 2 16:57:03 2025 -0700
usb: typec: tcpm/tcpci_maxim: Fix bounds check in process_rx()
commit 0736299d090f5c6a1032678705c4bc0a9511a3db upstream.
Register read of TCPC_RX_BYTE_CNT returns the total size consisting of:
PD message (pending read) size + 1 Byte for Frame Type (SOP*)
This is validated against the max PD message (`struct pd_message`) size
without accounting for the extra byte for the frame type. Note that the
struct pd_message does not contain a field for the frame_type. This
results in false negatives when the "PD message (pending read)" is equal
to the max PD message size.
Fixes: 6f413b559f86 ("usb: typec: tcpci_maxim: Chip level TCPC driver")
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Kyle Tso <kyletso@google.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/stable/20250502-b4-new-fix-pd-rx-count-v1-1-e5711ed09b3d%40google.com
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250502-b4-new-fix-pd-rx-count-v1-1-e5711ed09b3d@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qasim Ijaz <qasdev00@gmail.com>
Date: Tue Apr 22 14:47:17 2025 +0100
usb: typec: ucsi: fix Clang -Wsign-conversion warning
commit f4239ace2dd8606f6824757f192965a95746da05 upstream.
debugfs.c emits the following warnings when compiling with the -Wsign-conversion flag with clang 15:
drivers/usb/typec/ucsi/debugfs.c:58:27: warning: implicit conversion changes signedness: 'int' to 'u32' (aka 'unsigned int') [-Wsign-conversion]
ucsi->debugfs->status = ret;
~ ^~~
drivers/usb/typec/ucsi/debugfs.c:71:25: warning: implicit conversion changes signedness: 'u32' (aka 'unsigned int') to 'int' [-Wsign-conversion]
return ucsi->debugfs->status;
~~~~~~ ~~~~~~~~~~~~~~~^~~~~~
During ucsi_cmd() we see:
if (ret < 0) {
ucsi->debugfs->status = ret;
return ret;
}
But "status" is u32 meaning unsigned wrap-around occurs when assigning a value which is < 0 to it, this obscures the real status.
To fix this make the "status" of type int since ret is also of type int.
Fixes: df0383ffad64 ("usb: typec: ucsi: Add debugfs for ucsi commands")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250422134717.66218-1-qasdev00@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dave Penkler <dpenkler@gmail.com>
Date: Wed May 21 14:16:55 2025 +0200
usb: usbtmc: Fix read_stb function and get_stb ioctl
commit acb3dac2805d3342ded7dbbd164add32bbfdf21c upstream.
The usbtmc488_ioctl_read_stb function relied on a positive return from
usbtmc_get_stb to reset the srq condition in the driver. The
USBTMC_IOCTL_GET_STB case tested for a positive return to return the stb
to the user.
Commit: <cac01bd178d6> ("usb: usbtmc: Fix erroneous get_stb ioctl
error returns") changed the return value of usbtmc_get_stb to 0 on
success instead of returning the value of usb_control_msg which is
positive in the normal case. This change caused the function
usbtmc488_ioctl_read_stb and the USBTMC_IOCTL_GET_STB ioctl to no
longer function correctly.
Change the test in usbtmc488_ioctl_read_stb to test for failure
first and return the failure code immediately.
Change the test for the USBTMC_IOCTL_GET_STB ioctl to test for 0
instead of a positive value.
Fixes: cac01bd178d6 ("usb: usbtmc: Fix erroneous get_stb ioctl error returns")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250521121656.18174-3-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dave Penkler <dpenkler@gmail.com>
Date: Wed May 21 14:16:56 2025 +0200
usb: usbtmc: Fix timeout value in get_stb
commit 342e4955a1f1ce28c70a589999b76365082dbf10 upstream.
wait_event_interruptible_timeout requires a timeout argument
in units of jiffies. It was being called in usbtmc_get_stb
with the usb timeout value which is in units of milliseconds.
Pass the timeout argument converted to jiffies.
Fixes: 048c6d88a021 ("usb: usbtmc: Add ioctls to set/get usb timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250521121656.18174-4-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jonathan Wiepert <jonathan.wiepert@gmail.com>
Date: Thu Apr 24 18:14:57 2025 -0400
Use thread-safe function pointer in libbpf_print
[ Upstream commit 91dbac4076537b464639953c055c460d2bdfc7ea ]
This patch fixes a thread safety bug where libbpf_print uses the
global variable storing the print function pointer rather than the local
variable that had the print function set via __atomic_load_n.
Fixes: f1cb927cdb62 ("libbpf: Ensure print callback usage is thread-safe")
Signed-off-by: Jonathan Wiepert <jonathan.wiepert@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250424221457.793068-1-jonathan.wiepert@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Li RongQing <lirongqing@baidu.com>
Date: Wed May 21 11:46:47 2025 +0800
vfio/type1: Fix error unwind in migration dirty bitmap allocation
[ Upstream commit 4518e5a60c7fbf0cdff393c2681db39d77b4f87e ]
When setting up dirty page tracking at the vfio IOMMU backend for
device migration, if an error is encountered allocating a tracking
bitmap, the unwind loop fails to free previously allocated tracking
bitmaps. This occurs because the wrong loop index is used to
generate the tracking object. This results in unintended memory
usage for the life of the current DMA mappings where bitmaps were
successfully allocated.
Use the correct loop index to derive the tracking object for
freeing during unwind.
Fixes: d6a4c185660c ("vfio iommu: Implementation of ioctl for dirty pages tracking")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://lore.kernel.org/r/20250521034647.2877-1-lirongqing@baidu.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wupeng Ma <mawupeng1@huawei.com>
Date: Sat May 10 11:30:40 2025 +0800
VMCI: fix race between vmci_host_setup_notify and vmci_ctx_unset_notify
commit 1bd6406fb5f36c2bb1e96e27d4c3e9f4d09edde4 upstream.
During our test, it is found that a warning can be trigger in try_grab_folio
as follow:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1678 at mm/gup.c:147 try_grab_folio+0x106/0x130
Modules linked in:
CPU: 0 UID: 0 PID: 1678 Comm: syz.3.31 Not tainted 6.15.0-rc5 #163 PREEMPT(undef)
RIP: 0010:try_grab_folio+0x106/0x130
Call Trace:
<TASK>
follow_huge_pmd+0x240/0x8e0
follow_pmd_mask.constprop.0.isra.0+0x40b/0x5c0
follow_pud_mask.constprop.0.isra.0+0x14a/0x170
follow_page_mask+0x1c2/0x1f0
__get_user_pages+0x176/0x950
__gup_longterm_locked+0x15b/0x1060
? gup_fast+0x120/0x1f0
gup_fast_fallback+0x17e/0x230
get_user_pages_fast+0x5f/0x80
vmci_host_unlocked_ioctl+0x21c/0xf80
RIP: 0033:0x54d2cd
---[ end trace 0000000000000000 ]---
Digging into the source, context->notify_page may init by get_user_pages_fast
and can be seen in vmci_ctx_unset_notify which will try to put_page. However
get_user_pages_fast is not finished here and lead to following
try_grab_folio warning. The race condition is shown as follow:
cpu0 cpu1
vmci_host_do_set_notify
vmci_host_setup_notify
get_user_pages_fast(uva, 1, FOLL_WRITE, &context->notify_page);
lockless_pages_from_mm
gup_pgd_range
gup_huge_pmd // update &context->notify_page
vmci_host_do_set_notify
vmci_ctx_unset_notify
notify_page = context->notify_page;
if (notify_page)
put_page(notify_page); // page is freed
__gup_longterm_locked
__get_user_pages
follow_trans_huge_pmd
try_grab_folio // warn here
To slove this, use local variable page to make notify_page can be seen
after finish get_user_pages_fast.
Fixes: a1d88436d53a ("VMCI: Fix two UVA mapping bugs")
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/all/e91da589-ad57-3969-d979-879bbd10dddd@huawei.com/
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Link: https://lore.kernel.org/r/20250510033040.901582-1-mawupeng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ronak Doshi <ronak.doshi@broadcom.com>
Date: Fri May 30 15:27:00 2025 +0000
vmxnet3: correctly report gso type for UDP tunnels
[ Upstream commit 982d30c30eaa2ec723df42e3bf526c014c1dbb88 ]
Commit 3d010c8031e3 ("udp: do not accept non-tunnel GSO skbs landing
in a tunnel") added checks in linux stack to not accept non-tunnel
GRO packets landing in a tunnel. This exposed an issue in vmxnet3
which was not correctly reporting GRO packets for tunnel packets.
This patch fixes this issue by setting correct GSO type for the
tunnel packets.
Currently, vmxnet3 does not support reporting inner fields for LRO
tunnel packets. The issue is not seen for egress drivers that do not
use skb inner fields. The workaround is to enable tnl-segmentation
offload on the egress interfaces if the driver supports it. This
problem pre-exists this patch fix and can be addressed as a separate
future patch.
Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Link: https://patch.msgid.link/20250530152701.70354-1-ronak.doshi@broadcom.com
[pabeni@redhat.com: dropped the changelog]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nicolas Pitre <npitre@baylibre.com>
Date: Thu May 15 11:30:52 2025 -0400
vt: remove VT_RESIZE and VT_RESIZEX from vt_compat_ioctl()
[ Upstream commit c4c7ead7b86c1e7f11c64915b7e5bb6d2e242691 ]
They are listed amon those cmd values that "treat 'arg' as an integer"
which is wrong. They should instead fall into the default case. Probably
nobody ever relied on that code since 2009 but still.
Fixes: e92166517e3c ("tty: handle VT specific compat ioctls in vt driver")
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/pr214s15-36r8-6732-2pop-159nq85o48r7@syhkavp.arg
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <kees@kernel.org>
Date: Tue Apr 15 15:52:49 2025 -0700
watchdog: exar: Shorten identity name to fit correctly
[ Upstream commit 8e28276a569addb8a2324439ae473848ee52b056 ]
The static initializer for struct watchdog_info::identity is too long
and gets initialized without a trailing NUL byte. Since the length
of "identity" is part of UAPI and tied to ioctls, just shorten
the name of the device. Avoids the warning seen with GCC 15's
-Wunterminated-string-initialization option:
drivers/watchdog/exar_wdt.c:224:27: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
224 | .identity = "Exar/MaxLinear XR28V38x Watchdog",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 81126222bd3a ("watchdog: Exar/MaxLinear XR28V38x driver")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250415225246.work.458-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Baochen Qiang <quic_bqiang@quicinc.com>
Date: Thu Feb 20 16:24:42 2025 +0800
wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
[ Upstream commit 9f6e82d11bb9692a90d20b10f87345598945c803 ]
We get report [1] that CPU is running a hot loop in
ath11k_debugfs_fw_stats_request():
94.60% 0.00% i3status [kernel.kallsyms] [k] do_syscall_64
|
--94.60%--do_syscall_64
|
--94.55%--__sys_sendmsg
___sys_sendmsg
____sys_sendmsg
netlink_sendmsg
netlink_unicast
genl_rcv
netlink_rcv_skb
genl_rcv_msg
|
--94.55%--genl_family_rcv_msg_dumpit
__netlink_dump_start
netlink_dump
genl_dumpit
nl80211_dump_station
|
--94.55%--ieee80211_dump_station
sta_set_sinfo
|
--94.55%--ath11k_mac_op_sta_statistics
ath11k_debugfs_get_fw_stats
|
--94.55%--ath11k_debugfs_fw_stats_request
|
|--41.73%--_raw_spin_lock_bh
|
|--22.74%--__local_bh_enable_ip
|
|--9.22%--_raw_spin_unlock_bh
|
--6.66%--srso_alias_safe_ret
This is because, if for whatever reason ar->fw_stats_done is not set by
ath11k_update_stats_event(), ath11k_debugfs_fw_stats_request() won't yield
CPU before an up to 3s timeout.
Change to completion mechanism to avoid CPU burning.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Yury Vostrikov <mon@unformed.ru>
Closes: https://lore.kernel.org/all/7324ac7a-8b7a-42a5-aa19-de52138ff638@app.fastmail.com/ # [1]
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-2-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Easwar Hariharan <eahariha@linux.microsoft.com>
Date: Tue Dec 10 22:02:45 2024 +0000
wifi: ath11k: convert timeouts to secs_to_jiffies()
[ Upstream commit b29425972c5234a59b6fb634125420ed74266377 ]
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@@ constant C; @@
- msecs_to_jiffies(C * 1000)
+ secs_to_jiffies(C)
@@ constant C; @@
- msecs_to_jiffies(C * MSEC_PER_SEC)
+ secs_to_jiffies(C)
Link: https://lkml.kernel.org/r/20241210-converge-secs-to-jiffies-v3-14-ddfefd7e9f2a@linux.microsoft.com
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Daniel Mack <daniel@zonque.org>
Cc: David Airlie <airlied@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jeff Johnson <jjohnson@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Louis Peens <louis.peens@corigine.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Praveen Kaligineedi <pkaligineedi@google.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Shailend Chand <shailend@google.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Simon Horman <horms@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 9f6e82d11bb9 ("wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Baochen Qiang <quic_bqiang@quicinc.com>
Date: Thu Feb 20 16:24:43 2025 +0800
wifi: ath11k: don't use static variables in ath11k_debugfs_fw_stats_process()
[ Upstream commit 2bcf73b2612dda7432f2c2eaad6679bd291791f2 ]
Currently ath11k_debugfs_fw_stats_process() is using static variables to count
firmware stat events. Taking num_vdev as an example, if for whatever reason (
say ar->num_started_vdevs is 0 or firmware bug etc.) the following condition
(++num_vdev) == total_vdevs_started
is not met, is_end is not set thus num_vdev won't be cleared. Next time when
firmware stats is requested again, even if everything is working fine, we will
fail due to the condition above will never be satisfied.
The same applies to num_bcn as well.
Change to use non-static counters so that we have a chance to clear them each
time firmware stats is requested. Currently only ath11k_fw_stats_request() and
ath11k_debugfs_fw_stats_request() are requesting firmware stats, so clear
counters there.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Fixes: da3a9d3c1576 ("ath11k: refactor debugfs code into debugfs.c")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-3-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Baochen Qiang <quic_bqiang@quicinc.com>
Date: Thu Feb 20 16:24:44 2025 +0800
wifi: ath11k: don't wait when there is no vdev started
[ Upstream commit 3b6d00fa883075dcaf49221538230e038a9c0b43 ]
For WMI_REQUEST_VDEV_STAT request, firmware might split response into
multiple events dut to buffer limit, hence currently in
ath11k_debugfs_fw_stats_process() we wait until all events received.
In case there is no vdev started, this results in that below condition
would never get satisfied
((++ar->fw_stats.num_vdev_recvd) == total_vdevs_started)
finally the requestor would be blocked until wait time out.
The same applies to WMI_REQUEST_BCN_STAT request as well due to:
((++ar->fw_stats.num_bcn_recvd) == ar->num_started_vdevs)
Change to check the number of started vdev first: if it is zero, finish
wait directly; if not, follow the old way.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-4-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stone Zhang <quic_stonez@quicinc.com>
Date: Thu Mar 20 13:31:45 2025 +0800
wifi: ath11k: fix node corruption in ar->arvifs list
[ Upstream commit 31e98e277ae47f56632e4d663b1d4fd12ba33ea8 ]
In current WLAN recovery code flow, ath11k_core_halt() only
reinitializes the "arvifs" list head. This will cause the
list node immediately following the list head to become an
invalid list node. Because the prev of that node still points
to the list head "arvifs", but the next of the list head "arvifs"
no longer points to that list node.
When a WLAN recovery occurs during the execution of a vif
removal, and it happens before the spin_lock_bh(&ar->data_lock)
in ath11k_mac_op_remove_interface(), list_del() will detect the
previously mentioned situation, thereby triggering a kernel panic.
The fix is to remove and reinitialize all vif list nodes from the
list head "arvifs" during WLAN halt. The reinitialization is to make
the list nodes valid, ensuring that the list_del() in
ath11k_mac_op_remove_interface() can execute normally.
Call trace:
__list_del_entry_valid_or_report+0xb8/0xd0
ath11k_mac_op_remove_interface+0xb0/0x27c [ath11k]
drv_remove_interface+0x48/0x194 [mac80211]
ieee80211_do_stop+0x6e0/0x844 [mac80211]
ieee80211_stop+0x44/0x17c [mac80211]
__dev_close_many+0xac/0x150
__dev_change_flags+0x194/0x234
dev_change_flags+0x24/0x6c
devinet_ioctl+0x3a0/0x670
inet_ioctl+0x200/0x248
sock_do_ioctl+0x60/0x118
sock_ioctl+0x274/0x35c
__arm64_sys_ioctl+0xac/0xf0
invoke_syscall+0x48/0x114
...
Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04591-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Stone Zhang <quic_stonez@quicinc.com>
Link: https://patch.msgid.link/20250320053145.3445187-1-quic_stonez@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Date: Tue Mar 5 07:14:00 2024 -0800
wifi: ath11k: fix soc_dp_stats debugfs file permission
[ Upstream commit fa645e663165d69f05f95a0c3aa3b3d08f4fdeda ]
Currently the soc_dp_stats debugfs file has the following permissions:
# ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats
-rw------- 1 root root 0 Mar 4 15:04 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats
However this file does not actually support write operations -- no .write()
method is registered. Therefore use the correct permissions when creating
the file.
After the change:
# ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats
-r-------- 1 root root 0 Mar 4 15:15 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240305-fix-soc_dp_stats-permission-v1-1-2ec10b42f755@quicinc.com
Stable-dep-of: 9f6e82d11bb9 ("wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Date: Thu May 22 17:01:12 2025 -0300
wifi: ath11k: validate ath11k_crypto_mode on top of ath11k_core_qmi_firmware_ready
[ Upstream commit b0d226a60856a1b765bb9a3848c7b2322fd08c47 ]
if ath11k_crypto_mode is invalid (not ATH11K_CRYPT_MODE_SW/ATH11K_CRYPT_MODE_HW),
ath11k_core_qmi_firmware_ready() will not undo some actions that was previously
started/configured. Do the validation as soon as possible in order to avoid
undoing actions in that case and also to fix the following smatch warning:
drivers/net/wireless/ath/ath11k/core.c:2166 ath11k_core_qmi_firmware_ready()
warn: missing unwind goto?
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202304151955.oqAetVFd-lkp@intel.com/
Fixes: aa2092a9bab3 ("ath11k: add raw mode and software crypto support")
Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250522200519.16858-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: P Praneesh <quic_ppranees@quicinc.com>
Date: Wed Apr 16 07:49:03 2025 +0530
wifi: ath12k: Add MSDU length validation for TKIP MIC error
[ Upstream commit 763216fe6c5df95d122c71ef34c342427c987820 ]
In the WBM error path, while processing TKIP MIC errors, MSDU length
is fetched from the hal_rx_desc's msdu_end. This MSDU length is
directly passed to skb_put() without validation. In stress test
scenarios, the WBM error ring may receive invalid descriptors, which
could lead to an invalid MSDU length.
To fix this, add a check to drop the skb when the calculated MSDU
length is greater than the skb size.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250416021903.3178962-1-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rajat Soni <quic_rajson@quicinc.com>
Date: Wed Apr 30 10:25:38 2025 +0530
wifi: ath12k: fix memory leak in ath12k_service_ready_ext_event
[ Upstream commit 89142d34d5602c7447827beb181fa06eb08b9d5c ]
Currently, in ath12k_service_ready_ext_event(), svc_rdy_ext.mac_phy_caps
is not freed in the failure case, causing a memory leak. The following
trace is observed in kmemleak:
unreferenced object 0xffff8b3eb5789c00 (size 1024):
comm "softirq", pid 0, jiffies 4294942577
hex dump (first 32 bytes):
00 00 00 00 01 00 00 00 00 00 00 00 7b 00 00 10 ............{...
01 00 00 00 00 00 00 00 01 00 00 00 1f 38 00 00 .............8..
backtrace (crc 44e1c357):
__kmalloc_noprof+0x30b/0x410
ath12k_wmi_mac_phy_caps_parse+0x84/0x100 [ath12k]
ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k]
ath12k_wmi_svc_rdy_ext_parse+0x308/0x4c0 [ath12k]
ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k]
ath12k_service_ready_ext_event.isra.0+0x44/0xd0 [ath12k]
ath12k_wmi_op_rx+0x2eb/0xd70 [ath12k]
ath12k_htc_rx_completion_handler+0x1f4/0x330 [ath12k]
ath12k_ce_recv_process_cb+0x218/0x300 [ath12k]
ath12k_pci_ce_workqueue+0x1b/0x30 [ath12k]
process_one_work+0x219/0x680
bh_worker+0x198/0x1f0
tasklet_action+0x13/0x30
handle_softirqs+0xca/0x460
__irq_exit_rcu+0xbe/0x110
irq_exit_rcu+0x9/0x30
Free svc_rdy_ext.mac_phy_caps in the error case to fix this memory leak.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Rajat Soni <quic_rajson@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250430-wmi-mem-leak-v1-1-fcc9b49c2ddc@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Date: Wed Apr 16 07:47:24 2025 +0530
wifi: ath12k: fix node corruption in ar->arvifs list
[ Upstream commit 823435bd23108d6f8be89ea2d025c0e2e3769c51 ]
In current WLAN recovery code flow, ath12k_core_halt() only reinitializes
the "arvifs" list head. This will cause the list node immediately following
the list head to become an invalid list node. Because the prev of that node
still points to the list head "arvifs", but the next of the list head
"arvifs" no longer points to that list node.
When a WLAN recovery occurs during the execution of a vif removal, and it
happens before the spin_lock_bh(&ar->data_lock) in
ath12k_mac_vdev_delete(), list_del() will detect the previously mentioned
situation, thereby triggering a kernel panic.
The fix is to remove and reinitialize all vif list nodes from the list head
"arvifs" during WLAN halt. The reinitialization is to make the list nodes
valid, ensuring that the list_del() in ath12k_mac_vdev_delete() can execute
normally.
Call trace:
__list_del_entry_valid_or_report+0xd4/0x100 (P)
ath12k_mac_remove_link_interface.isra.0+0xf8/0x2e4 [ath12k]
ath12k_scan_vdev_clean_work+0x40/0x164 [ath12k]
cfg80211_wiphy_work+0xfc/0x100
process_one_work+0x164/0x2d0
worker_thread+0x254/0x380
kthread+0xfc/0x100
ret_from_fork+0x10/0x20
The change is mostly copied from the ath11k patch:
https://lore.kernel.org/all/20250320053145.3445187-1-quic_stonez@quicinc.com/
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250416021724.2162519-1-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Date: Wed Apr 9 20:53:41 2025 +0530
wifi: ath12k: Fix WMI tag for EHT rate in peer assoc
[ Upstream commit 1a0e65750b55d2cf5de4a9bf7d6d55718784bdb7 ]
Incorrect WMI tag is used for EHT rate update from host to firmware
while encoding peer assoc WMI.
Correct the WMI tag used for EHT rate update from WMI_TAG_HE_RATE_SET
to the proper tag. This ensures firmware does not mistakenly update HE rate during parsing.
Found during code review. Compile tested only.
Fixes: 5b70ec6036c1 ("wifi: ath12k: add WMI support for EHT peer")
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Link: https://patch.msgid.link/20250409152341.944628-1-ramya.gnanasekar@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Toke Høiland-Jørgensen <toke@toke.dk>
Date: Wed Apr 2 13:22:16 2025 +0200
wifi: ath9k_htc: Abort software beacon handling if disabled
[ Upstream commit ac4e317a95a1092b5da5b9918b7118759342641c ]
A malicious USB device can send a WMI_SWBA_EVENTID event from an
ath9k_htc-managed device before beaconing has been enabled. This causes
a device-by-zero error in the driver, leading to either a crash or an
out of bounds read.
Prevent this by aborting the handling in ath9k_htc_swba() if beacons are
not enabled.
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/r/88967.1743099372@localhost
Fixes: 832f6a18fc2a ("ath9k_htc: Add beacon slots")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250402112217.58533-1-toke@toke.dk
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Henry Martin <bsdhenrymartin@gmail.com>
Date: Mon Apr 7 14:19:00 2025 +0800
wifi: mt76: mt7915: Fix null-ptr-deref in mt7915_mmio_wed_init()
[ Upstream commit efb95439c1477bbc955cacd0179c35e7861b437c ]
devm_ioremap() returns NULL on error. Currently, mt7915_mmio_wed_init()
does not check for this case, which results in a NULL pointer
dereference.
Prevent null pointer dereference in mt7915_mmio_wed_init().
Fixes: 4f831d18d12d ("wifi: mt76: mt7915: enable WED RX support")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250407061900.85317-1-bsdhenrymartin@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shayne Chen <shayne.chen@mediatek.com>
Date: Thu May 15 11:29:50 2025 +0800
wifi: mt76: mt7996: fix RX buffer size of MCU event
[ Upstream commit 42cb27af34de4acf680606fad2c1f2932110591f ]
Some management frames are first processed by the firmware and then
passed to the driver through the MCU event rings. In CONNAC3, event rings
do not support scatter-gather and have a size limitation of 2048 bytes.
If a packet sized between 1728 and 2048 bytes arrives from an event ring,
the ring will hang because the driver attempts to use scatter-gather to
process it.
To fix this, include the size of struct skb_shared_info in the MCU RX
buffer size to prevent scatter-gather from being used for event skb in
mt76_dma_rx_fill_buf().
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-7-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Chiu <chui-hao.chiu@mediatek.com>
Date: Thu May 15 11:29:46 2025 +0800
wifi: mt76: mt7996: set EHT max ampdu length capability
[ Upstream commit 8b2f574845e33d02e7fbad2d3192a8b717567afa ]
Set the max AMPDU length in the EHT MAC CAP. Without this patch, the
peer station cannot obtain the correct capability, which prevents
achieving peak throughput on the 2 GHz band.
Fixes: 1816ad9381e0 ("wifi: mt76: mt7996: add max mpdu len capability")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Antipov <dmantipov@yandex.ru>
Date: Tue Apr 15 12:07:20 2025 +0300
wifi: rtw88: do not ignore hardware read error during DPK
[ Upstream commit 20d3c19bd8f9b498173c198eadf54580c8caa336 ]
In 'rtw8822c_dpk_cal_coef1()', do not ignore error returned
by 'check_hw_ready()' but issue a warning to denote possible
DPK issue. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5227c2ee453d ("rtw88: 8822c: add SW DPK support")
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250415090720.194048-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Date: Tue May 13 12:13:04 2025 +0000
wifi: rtw88: fix the 'para' buffer size to avoid reading out of bounds
[ Upstream commit 4c2c372de2e108319236203cce6de44d70ae15cd ]
Set the size to 6 instead of 2, since 'para' array is passed to
'rtw_fw_bt_wifi_control(rtwdev, para[0], ¶[1])', which reads
5 bytes:
void rtw_fw_bt_wifi_control(struct rtw_dev *rtwdev, u8 op_code, u8 *data)
{
...
SET_BT_WIFI_CONTROL_DATA1(h2c_pkt, *data);
SET_BT_WIFI_CONTROL_DATA2(h2c_pkt, *(data + 1));
...
SET_BT_WIFI_CONTROL_DATA5(h2c_pkt, *(data + 4));
Detected using the static analysis tool - Svace.
Fixes: 4136214f7c46 ("rtw88: add BT co-existence support")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250513121304.124141-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhen XIN <zhen.xin@nokia-sbell.com>
Date: Thu Apr 10 15:42:16 2025 +0000
wifi: rtw88: sdio: call rtw_sdio_indicate_tx_status unconditionally
[ Upstream commit fc5f5a0ec463ae6a07850428bd3082947e01d276 ]
The rtw88-sdio do not work in AP mode due to the lack of TX status report
for management frames.
Make the invocation of rtw_sdio_indicate_tx_status unconditional and cover
all packet queues
Tested-on: rtl8723ds
Fixes: 65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets")
Signed-off-by: Zhen XIN <zhen.xin@nokia-sbell.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250410154217.1849977-2-zhen.xin@nokia-sbell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhen XIN <zhen.xin@nokia-sbell.com>
Date: Thu Apr 10 15:42:17 2025 +0000
wifi: rtw88: sdio: map mgmt frames to queue TX_DESC_QSEL_MGMT
[ Upstream commit b2effcdc237979dcc533d446a792fc54fd0e1213 ]
The rtw88-sdio do not work in AP mode due to the lack of TX status report
for management frames.
Map the management frames to queue TX_DESC_QSEL_MGMT, which enables the
chip to generate TX reports for these frames
Tested-on: rtl8723ds
Fixes: 65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets")
Signed-off-by: Zhen XIN <zhen.xin@nokia-sbell.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250410154217.1849977-3-zhen.xin@nokia-sbell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mirco Barone <mirco.barone@polito.it>
Date: Thu Jun 5 14:06:16 2025 +0200
wireguard: device: enable threaded NAPI
[ Upstream commit db9ae3b6b43c79b1ba87eea849fd65efa05b4b2e ]
Enable threaded NAPI by default for WireGuard devices in response to low
performance behavior that we observed when multiple tunnels (and thus
multiple wg devices) are deployed on a single host. This affects any
kind of multi-tunnel deployment, regardless of whether the tunnels share
the same endpoints or not (i.e., a VPN concentrator type of gateway
would also be affected).
The problem is caused by the fact that, in case of a traffic surge that
involves multiple tunnels at the same time, the polling of the NAPI
instance of all these wg devices tends to converge onto the same core,
causing underutilization of the CPU and bottlenecking performance.
This happens because NAPI polling is hosted by default in softirq
context, but the WireGuard driver only raises this softirq after the rx
peer queue has been drained, which doesn't happen during high traffic.
In this case, the softirq already active on a core is reused instead of
raising a new one.
As a result, once two or more tunnel softirqs have been scheduled on
the same core, they remain pinned there until the surge ends.
In our experiments, this almost always leads to all tunnel NAPIs being
handled on a single core shortly after a surge begins, limiting
scalability to less than 3× the performance of a single tunnel, despite
plenty of unused CPU cores being available.
The proposed mitigation is to enable threaded NAPI for all WireGuard
devices. This moves the NAPI polling context to a dedicated per-device
kernel thread, allowing the scheduler to balance the load across all
available cores.
On our 32-core gateways, enabling threaded NAPI yields a ~4× performance
improvement with 16 tunnels, increasing throughput from ~13 Gbps to
~48 Gbps. Meanwhile, CPU usage on the receiver (which is the bottleneck)
jumps from 20% to 100%.
We have found no performance regressions in any scenario we tested.
Single-tunnel throughput remains unchanged.
More details are available in our Netdev paper.
Link: https://netdevconf.info/0x18/docs/netdev-0x18-paper23-talk-paper.pdf
Signed-off-by: Mirco Barone <mirco.barone@polito.it>
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250605120616.2808744-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ahmed S. Darwish <darwi@linutronix.de>
Date: Tue May 6 07:04:13 2025 +0200
x86/cpu: Sanitize CPUID(0x80000000) output
[ Upstream commit cc663ba3fe383a628a812f893cc98aafff39ab04 ]
CPUID(0x80000000).EAX returns the max extended CPUID leaf available. On
x86-32 machines without an extended CPUID range, a CPUID(0x80000000)
query will just repeat the output of the last valid standard CPUID leaf
on the CPU; i.e., a garbage values. Current tip:x86/cpu code protects against
this by doing:
eax = cpuid_eax(0x80000000);
c->extended_cpuid_level = eax;
if ((eax & 0xffff0000) == 0x80000000) {
// CPU has an extended CPUID range. Check for 0x80000001
if (eax >= 0x80000001) {
cpuid(0x80000001, ...);
}
}
This is correct so far. Afterwards though, the same possibly broken EAX
value is used to check the availability of other extended CPUID leaves:
if (c->extended_cpuid_level >= 0x80000007)
...
if (c->extended_cpuid_level >= 0x80000008)
...
if (c->extended_cpuid_level >= 0x8000000a)
...
if (c->extended_cpuid_level >= 0x8000001f)
...
which is invalid. Fix this by immediately setting the CPU's max extended
CPUID leaf to zero if CPUID(0x80000000).EAX doesn't indicate a valid
CPUID extended range.
While at it, add a comment, similar to kernel/head_32.S, clarifying the
CPUID(0x80000000) sanity check.
References: 8a50e5135af0 ("x86-32: Use symbolic constants, safer CPUID when enabling EFER.NX")
Fixes: 3da99c977637 ("x86: make (early)_identify_cpu more the same between 32bit and 64 bit")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250506050437.10264-3-darwi@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrew Cooper <andrew.cooper3@citrix.com>
Date: Wed Apr 2 18:24:58 2025 +0100
x86/idle: Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR in mwait_idle_with_hints() and prefer_mwait_c1_over_halt()
[ Upstream commit 1f13c60d84e880df6698441026e64f84c7110c49 ]
The following commit, 12 years ago:
7e98b7192046 ("x86, idle: Use static_cpu_has() for CLFLUSH workaround, add barriers")
added barriers around the CLFLUSH in mwait_idle_with_hints(), justified with:
... and add memory barriers around it since the documentation is explicit
that CLFLUSH is only ordered with respect to MFENCE.
This also triggered, 11 years ago, the same adjustment in:
f8e617f45829 ("sched/idle/x86: Optimize unnecessary mwait_idle() resched IPIs")
during development, although it failed to get the static_cpu_has_bug() treatment.
X86_BUG_CLFLUSH_MONITOR (a.k.a the AAI65 errata) is specific to Intel CPUs,
and the SDM currently states:
Executions of the CLFLUSH instruction are ordered with respect to each
other and with respect to writes, locked read-modify-write instructions,
and fence instructions[1].
With footnote 1 reading:
Earlier versions of this manual specified that executions of the CLFLUSH
instruction were ordered only by the MFENCE instruction. All processors
implementing the CLFLUSH instruction also order it relative to the other
operations enumerated above.
i.e. The SDM was incorrect at the time, and barriers should not have been
inserted. Double checking the original AAI65 errata (not available from
intel.com any more) shows no mention of barriers either.
Note: If this were a general codepath, the MFENCEs would be needed, because
AMD CPUs of the same vintage do sport otherwise-unordered CLFLUSHs.
Remove the unnecessary barriers. Furthermore, use a plain alternative(),
rather than static_cpu_has_bug() and/or no optimisation. The workaround
is a single instruction.
Use an explicit %rax pointer rather than a general memory operand, because
MONITOR takes the pointer implicitly in the same way.
[ mingo: Cleaned up the commit a bit. ]
Fixes: 7e98b7192046 ("x86, idle: Use static_cpu_has() for CLFLUSH workaround, add barriers")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250402172458.1378112-1-andrew.cooper3@citrix.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Wed Feb 26 16:01:57 2025 +0100
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
commit 8b68e978718f14fdcb080c2a7791c52a0d09bc6d upstream.
io_bitmap_exit() is invoked from exit_thread() when a task exists or
when a fork fails. In the latter case the exit_thread() cleans up
resources which were allocated during fork().
io_bitmap_exit() invokes task_update_io_bitmap(), which in turn ends up
in tss_update_io_bitmap(). tss_update_io_bitmap() operates on the
current task. If current has TIF_IO_BITMAP set, but no bitmap installed,
tss_update_io_bitmap() crashes with a NULL pointer dereference.
There are two issues, which lead to that problem:
1) io_bitmap_exit() should not invoke task_update_io_bitmap() when
the task, which is cleaned up, is not the current task. That's a
clear indicator for a cleanup after a failed fork().
2) A task should not have TIF_IO_BITMAP set and neither a bitmap
installed nor IOPL emulation level 3 activated.
This happens when a kernel thread is created in the context of
a user space thread, which has TIF_IO_BITMAP set as the thread
flags are copied and the IO bitmap pointer is cleared.
Other than in the failed fork() case this has no impact because
kernel threads including IO workers never return to user space and
therefore never invoke tss_update_io_bitmap().
Cure this by adding the missing cleanups and checks:
1) Prevent io_bitmap_exit() to invoke task_update_io_bitmap() if
the to be cleaned up task is not the current task.
2) Clear TIF_IO_BITMAP in copy_thread() unconditionally. For user
space forks it is set later, when the IO bitmap is inherited in
io_bitmap_share().
For paranoia sake, add a warning into tss_update_io_bitmap() to catch
the case, when that code is invoked with inconsistent state.
Fixes: ea5f1cd7ab49 ("x86/ioperm: Remove bitmap if all permissions dropped")
Reported-by: syzbot+e2b1803445d236442e54@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/87wmdceom2.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Annie Li <jiayanli@google.com>
Date: Wed Apr 30 05:34:24 2025 +0000
x86/microcode/AMD: Do not return error when microcode update is not necessary
[ Upstream commit b43dc4ab097859c24e2a6993119c927cffc856aa ]
After
6f059e634dcd("x86/microcode: Clarify the late load logic"),
if the load is up-to-date, the AMD side returns UCODE_OK which leads to
load_late_locked() returning -EBADFD.
Handle UCODE_OK in the switch case to avoid this error.
[ bp: Massage commit message. ]
Fixes: 6f059e634dcd ("x86/microcode: Clarify the late load logic")
Signed-off-by: Annie Li <jiayanli@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250430053424.77438-1-jiayanli@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Date: Fri May 9 17:06:33 2025 +0000
x86/mtrr: Check if fixed-range MTRRs exist in mtrr_save_fixed_ranges()
[ Upstream commit 824c6384e8d9275d4ec7204f3f79a4ac6bc10379 ]
When suspending, save_processor_state() calls mtrr_save_fixed_ranges()
to save fixed-range MTRRs.
On platforms without fixed-range MTRRs like the ACRN hypervisor which
has removed fixed-range MTRR emulation, accessing these MSRs will
trigger an unchecked MSR access error. Make sure fixed-range MTRRs are
supported before access to prevent such error.
Since mtrr_state.have_fixed is only set when MTRRs are present and
enabled, checking the CPU feature flag in mtrr_save_fixed_ranges() is
unnecessary.
Fixes: 3ebad5905609 ("[PATCH] x86: Save and restore the fixed-range MTRRs of the BSP when suspending")
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250509170633.3411169-2-jiaqing.zhao@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stefano Stabellini <stefano.stabellini@amd.com>
Date: Mon May 12 14:54:52 2025 -0700
xen/arm: call uaccess_ttbr0_enable for dm_op hypercall
commit 7f9bbc1140ff8796230bc2634055763e271fd692 upstream.
dm_op hypercalls might come from userspace and pass memory addresses as
parameters. The memory addresses typically correspond to buffers
allocated in userspace to hold extra hypercall parameters.
On ARM, when CONFIG_ARM64_SW_TTBR0_PAN is enabled, they might not be
accessible by Xen, as a result ioreq hypercalls might fail. See the
existing comment in arch/arm64/xen/hypercall.S regarding privcmd_call
for reference.
For privcmd_call, Linux calls uaccess_ttbr0_enable before issuing the
hypercall thanks to commit 9cf09d68b89a. We need to do the same for
dm_op. This resolves the problem.
Cc: stable@kernel.org
Fixes: 9cf09d68b89a ("arm64: xen: Enable user access before a privcmd hvc call")
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <alpine.DEB.2.22.394.2505121446370.8380@ubuntu-linux-20-04-desktop>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Roger Pau Monne <roger.pau@citrix.com>
Date: Wed May 14 10:04:26 2025 +0200
xen/x86: fix initial memory balloon target
[ Upstream commit 74287971dbb3fe322bb316afd9e7fb5807e23bee ]
When adding extra memory regions as ballooned pages also adjust the balloon
target, otherwise when the balloon driver is started it will populate
memory to match the target value and consume all the extra memory regions
added.
This made the usage of the Xen `dom0_mem=,max:` command line parameter for
dom0 not work as expected, as the target won't be adjusted and when the
balloon is started it will populate memory straight to the 'max:' value.
It would equally affect domUs that have memory != maxmem.
Kernels built with CONFIG_XEN_UNPOPULATED_ALLOC are not affected, because
the extra memory regions are consumed by the unpopulated allocation driver,
and then balloon_add_regions() becomes a no-op.
Reported-by: John <jw@nuclearfallout.net>
Fixes: 87af633689ce ('x86/xen: fix balloon target initialization for PVH dom0')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Message-ID: <20250514080427.28129-1-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cosmin Ratiu <cratiu@nvidia.com>
Date: Fri Apr 11 10:49:54 2025 +0300
xfrm: Use xdo.dev instead of xdo.real_dev
[ Upstream commit 25ac138f58e7d5c8bffa31e8891418d2819180c4 ]
The policy offload struct was reused from the state offload and
real_dev was copied from dev, but it was never set to anything else.
Simplify the code by always using xdo.dev for policies.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>