Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Thu Oct 16 09:54:12 2025 -0400
ACPI: battery: Add synchronization between interface updates
[ Upstream commit 399dbcadc01ebf0035f325eaa8c264f8b5cd0a14 ]
There is no synchronization between different code paths in the ACPI
battery driver that update its sysfs interface or its power supply
class device interface. In some cases this results to functional
failures due to race conditions.
One example of this is when two ACPI notifications:
- ACPI_BATTERY_NOTIFY_STATUS (0x80)
- ACPI_BATTERY_NOTIFY_INFO (0x81)
are triggered (by the platform firmware) in a row with a little delay
in between after removing and reinserting a laptop battery. Both
notifications cause acpi_battery_update() to be called and if the delay
between them is sufficiently small, sysfs_add_battery() can be re-entered
before battery->bat is set which leads to a duplicate sysfs entry error:
sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0A:00/power_supply/BAT1'
CPU: 1 UID: 0 PID: 185 Comm: kworker/1:4 Kdump: loaded Not tainted 6.12.38+deb13-amd64 #1 Debian 6.12.38-1
Hardware name: Gateway NV44 /SJV40-MV , BIOS V1.3121 04/08/2009
Workqueue: kacpi_notify acpi_os_execute_deferred
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
sysfs_warn_dup.cold+0x17/0x23
sysfs_create_dir_ns+0xce/0xe0
kobject_add_internal+0xba/0x250
kobject_add+0x96/0xc0
? get_device_parent+0xde/0x1e0
device_add+0xe2/0x870
__power_supply_register.part.0+0x20f/0x3f0
? wake_up_q+0x4e/0x90
sysfs_add_battery+0xa4/0x1d0 [battery]
acpi_battery_update+0x19e/0x290 [battery]
acpi_battery_notify+0x50/0x120 [battery]
acpi_ev_notify_dispatch+0x49/0x70
acpi_os_execute_deferred+0x1a/0x30
process_one_work+0x177/0x330
worker_thread+0x251/0x390
? __pfx_worker_thread+0x10/0x10
kthread+0xd2/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
kobject: kobject_add_internal failed for BAT1 with -EEXIST, don't try to register things with the same name in the same directory.
There are also other scenarios in which analogous issues may occur.
Address this by using a common lock in all of the code paths leading
to updates of driver interfaces: ACPI Notify () handler, system resume
callback and post-resume notification, device addition and removal.
This new lock replaces sysfs_lock that has been used only in
sysfs_remove_battery() which now is going to be always called under
the new lock, so it doesn't need any internal locking any more.
Fixes: 10666251554c ("ACPI: battery: Install Notify() handler directly")
Closes: https://lore.kernel.org/linux-acpi/20250910142653.313360-1-luogf2025@163.com/
Reported-by: GuangFei Luo <luogf2025@163.com>
Tested-by: GuangFei Luo <luogf2025@163.com>
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Weißschuh <linux@weissschuh.net>
Date: Thu Oct 16 09:54:09 2025 -0400
ACPI: battery: allocate driver data through devm_ APIs
[ Upstream commit 909dfc60692331e1599d5e28a8f08a611f353aef ]
Simplify the cleanup logic a bit.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240904-acpi-battery-cleanups-v1-2-a3bf74f22d40@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 399dbcadc01e ("ACPI: battery: Add synchronization between interface updates")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Thu Oct 16 09:54:11 2025 -0400
ACPI: battery: Check for error code from devm_mutex_init() call
[ Upstream commit 815daedc318b2f9f1b956d0631377619a0d69d96 ]
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Fixes: 0710c1ce5045 ("ACPI: battery: initialize mutexes through devm_ APIs")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241030162754.2110946-1-andriy.shevchenko@linux.intel.com
[ rjw: Added 2 empty code lines ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 399dbcadc01e ("ACPI: battery: Add synchronization between interface updates")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Weißschuh <linux@weissschuh.net>
Date: Thu Oct 16 09:54:10 2025 -0400
ACPI: battery: initialize mutexes through devm_ APIs
[ Upstream commit 0710c1ce50455ed0db91bffa0eebbaa4f69b1773 ]
Simplify the cleanup logic a bit.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240904-acpi-battery-cleanups-v1-3-a3bf74f22d40@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 399dbcadc01e ("ACPI: battery: Add synchronization between interface updates")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com>
Date: Tue Sep 23 05:01:13 2025 +0330
ACPI: debug: fix signedness issues in read/write helpers
commit 496f9372eae14775e0524e83e952814691fe850a upstream.
In the ACPI debugger interface, the helper functions for read and write
operations use "int" as the length parameter data type. When a large
"size_t count" is passed from the file operations, this cast to "int"
results in truncation and a negative value due to signed integer
representation.
Logically, this negative number propagates to the min() calculation,
where it is selected over the positive buffer space value, leading to
unexpected behavior. Subsequently, when this negative value is used in
copy_to_user() or copy_from_user(), it is interpreted as a large positive
value due to the unsigned nature of the size parameter in these functions,
causing the copy operations to attempt handling sizes far beyond the
intended buffer limits.
Address the issue by:
- Changing the length parameters in acpi_aml_read_user() and
acpi_aml_write_user() from "int" to "size_t", aligning with the
expected unsigned size semantics.
- Updating return types and local variables in acpi_aml_read() and
acpi_aml_write() to "ssize_t" for consistency with kernel file
operation conventions.
- Using "size_t" for the "n" variable to ensure calculations remain
unsigned.
- Using min_t() for circ_count_to_end() and circ_space_to_end() to
ensure type-safe comparisons and prevent integer overflow.
Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com>
Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com
[ rjw: Changelog tweaks, local variable definitions ordering adjustments ]
Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities")
Cc: 4.5+ <stable@vger.kernel.org> # 4.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Thu Oct 16 15:28:31 2025 -0400
ACPI: property: Add code comments explaining what is going on
[ Upstream commit 737c3a09dcf69ba2814f3674947ccaec1861c985 ]
In some places in the ACPI device properties handling code, it is
unclear why the code is what it is. Some assumptions are not documented
and some pieces of code are based on knowledge that is not mentioned
anywhere.
Add code comments explaining these things.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Stable-dep-of: baf60d5cb8bc ("ACPI: property: Do not pass NULL handles to acpi_attach_data()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Thu Oct 16 15:28:30 2025 -0400
ACPI: property: Disregard references in data-only subnode lists
[ Upstream commit d06118fe9b03426484980ed4c189a8c7b99fa631 ]
Data-only subnode links following the ACPI data subnode GUID in a _DSD
package are expected to point to named objects returning _DSD-equivalent
packages. If a reference to such an object is used in the target field
of any of those links, that object will be evaluated in place (as a
named object) and its return data will be embedded in the outer _DSD
package.
For this reason, it is not expected to see a subnode link with the
target field containing a local reference (that would mean pointing
to a device or another object that cannot be evaluated in place and
therefore cannot return a _DSD-equivalent package).
Accordingly, simplify the code parsing data-only subnode links to
simply print a message when it encounters a local reference in the
target field of one of those links.
Moreover, since acpi_nondev_subnode_data_ok() would only have one
caller after the change above, fold it into that caller.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0jVeSrDO6hrZhKgRZrH=FpGD4vNUjFD8hV9WwN9TLHjzQ@mail.gmail.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Stable-dep-of: baf60d5cb8bc ("ACPI: property: Do not pass NULL handles to acpi_attach_data()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Thu Oct 16 15:28:32 2025 -0400
ACPI: property: Do not pass NULL handles to acpi_attach_data()
[ Upstream commit baf60d5cb8bc6b85511c5df5f0ad7620bb66d23c ]
In certain circumstances, the ACPI handle of a data-only node may be
NULL, in which case it does not make sense to attempt to attach that
node to an ACPI namespace object, so update the code to avoid attempts
to do so.
This prevents confusing and unuseful error messages from being printed.
Also document the fact that the ACPI handle of a data-only node may be
NULL and when that happens in a code comment. In addition, make
acpi_add_nondev_subnodes() print a diagnostic message for each data-only
node with an unknown ACPI namespace scope.
Fixes: 1d52f10917a7 ("ACPI: property: Tie data nodes to acpi handles")
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Mon Sep 15 20:21:33 2025 +0200
ACPI: property: Fix buffer properties extraction for subnodes
commit d0759b10989c5c5aae3d455458c9fc4e8cc694f7 upstream.
The ACPI handle passed to acpi_extract_properties() as the first
argument represents the ACPI namespace scope in which to look for
objects returning buffers associated with buffer properties.
For _DSD objects located immediately under ACPI devices, this handle is
the same as the handle of the device object holding the _DSD, but for
data-only subnodes it is not so.
First of all, data-only subnodes are represented by objects that
cannot hold other objects in their scopes (like control methods).
Therefore a data-only subnode handle cannot be used for completing
relative pathname segments, so the current code in
in acpi_nondev_subnode_extract() passing a data-only subnode handle
to acpi_extract_properties() is invalid.
Moreover, a data-only subnode of device A may be represented by an
object located in the scope of device B (which kind of makes sense,
for instance, if A is a B's child). In that case, the scope in
question would be the one of device B. In other words, the scope
mentioned above is the same as the scope used for subnode object
lookup in acpi_nondev_subnode_extract().
Accordingly, rearrange that function to use the same scope for the
extraction of properties and subnode object lookup.
Fixes: 103e10c69c61 ("ACPI: property: Add support for parsing buffer property UUID")
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Daniel Tang <danielzgtg.opensource@gmail.com>
Date: Thu Aug 28 01:38:14 2025 -0400
ACPI: TAD: Add missing sysfs_remove_group() for ACPI_TAD_RT
commit 4aac453deca0d9c61df18d968f8864c3ae7d3d8d upstream.
Previously, after `rmmod acpi_tad`, `modprobe acpi_tad` would fail
with this dmesg:
sysfs: cannot create duplicate filename '/devices/platform/ACPI000E:00/time'
Call Trace:
<TASK>
dump_stack_lvl+0x6c/0x90
dump_stack+0x10/0x20
sysfs_warn_dup+0x8b/0xa0
sysfs_add_file_mode_ns+0x122/0x130
internal_create_group+0x1dd/0x4c0
sysfs_create_group+0x13/0x20
acpi_tad_probe+0x147/0x1f0 [acpi_tad]
platform_probe+0x42/0xb0
</TASK>
acpi-tad ACPI000E:00: probe with driver acpi-tad failed with error -17
Fixes: 3230b2b3c1ab ("ACPI: TAD: Add low-level support for real time capability")
Signed-off-by: Daniel Tang <danielzgtg.opensource@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/2881298.hMirdbgypa@daniel-desktop3
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Huacai Chen <chenhuacai@kernel.org>
Date: Fri Sep 12 21:54:53 2025 +0200
ACPICA: Allow to skip Global Lock initialization
commit feb8ae81b2378b75a99c81d315602ac8918ed382 upstream.
Introduce acpi_gbl_use_global_lock, which allows to skip the Global Lock
initialization. This is useful for systems without Global Lock (such as
loong_arch), so as to avoid error messages during boot phase:
ACPI Error: Could not enable global_lock event (20240827/evxfevnt-182)
ACPI Error: No response from Global Lock hardware, disabling lock (20240827/evglock-59)
Link: https://github.com/acpica/acpica/commit/463cb0fe
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Stephan Gerhold <stephan.gerhold@linaro.org>
Date: Mon Sep 15 15:28:30 2025 +0200
arm64: dts: qcom: msm8916: Add missing MDSS reset
commit 99b78773c2ae55dcc01025f94eae8ce9700ae985 upstream.
On most MSM8916 devices (aside from the DragonBoard 410c), the bootloader
already initializes the display to show the boot splash screen. In this
situation, MDSS is already configured and left running when starting Linux.
To avoid side effects from the bootloader configuration, the MDSS reset can
be specified in the device tree to start again with a clean hardware state.
The reset for MDSS is currently missing in msm8916.dtsi, which causes
errors when the MDSS driver tries to re-initialize the registers:
dsi_err_worker: status=6
dsi_err_worker: status=6
dsi_err_worker: status=6
...
It turns out that we have always indirectly worked around this by building
the MDSS driver as a module. Before v6.17, the power domain was temporarily
turned off until the module was loaded, long enough to clear the register
contents. In v6.17, power domains are not turned off during boot until
sync_state() happens, so this is no longer working. Even before v6.17 this
resulted in broken behavior, but notably only when the MDSS driver was
built-in instead of a module.
Cc: stable@vger.kernel.org
Fixes: 305410ffd1b2 ("arm64: dts: msm8916: Add display support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250915-msm8916-resets-v1-1-a5c705df0c45@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Stephan Gerhold <stephan.gerhold@linaro.org>
Date: Mon Sep 15 15:28:31 2025 +0200
arm64: dts: qcom: msm8939: Add missing MDSS reset
commit f73c82c855e186e9b67125e3eee743960320e43c upstream.
On most MSM8939 devices, the bootloader already initializes the display to
show the boot splash screen. In this situation, MDSS is already configured
and left running when starting Linux. To avoid side effects from the
bootloader configuration, the MDSS reset can be specified in the device
tree to start again with a clean hardware state.
The reset for MDSS is currently missing in msm8939.dtsi, which causes
errors when the MDSS driver tries to re-initialize the registers:
dsi_err_worker: status=6
dsi_err_worker: status=6
dsi_err_worker: status=6
...
It turns out that we have always indirectly worked around this by building
the MDSS driver as a module. Before v6.17, the power domain was temporarily
turned off until the module was loaded, long enough to clear the register
contents. In v6.17, power domains are not turned off during boot until
sync_state() happens, so this is no longer working. Even before v6.17 this
resulted in broken behavior, but notably only when the MDSS driver was
built-in instead of a module.
Cc: stable@vger.kernel.org
Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250915-msm8916-resets-v1-2-a5c705df0c45@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Stephan Gerhold <stephan.gerhold@linaro.org>
Date: Thu Aug 21 10:15:09 2025 +0200
arm64: dts: qcom: sdm845: Fix slimbam num-channels/ees
commit 316294bb6695a43a9181973ecd4e6fb3e576a9f7 upstream.
Reading the hardware registers of the &slimbam on RB3 reveals that the BAM
supports only 23 pipes (channels) and supports 4 EEs instead of 2. This
hasn't caused problems so far since nothing is using the extra channels,
but attempting to use them would lead to crashes.
The bam_dma driver might warn in the future if the num-channels in the DT
are wrong, so correct the properties in the DT to avoid future regressions.
Cc: stable@vger.kernel.org
Fixes: 27ca1de07dc3 ("arm64: dts: qcom: sdm845: add slimbus nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250821-sdm845-slimbam-channels-v1-1-498f7d46b9ee@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vibhore Vardhan <vibhore@ti.com>
Date: Wed Sep 3 11:55:12 2025 +0530
arm64: dts: ti: k3-am62a-main: Fix main padcfg length
commit 4c4e48afb6d85c1a8f9fdbae1fdf17ceef4a6f5b upstream.
The main pad configuration register region starts with the register
MAIN_PADCFG_CTRL_MMR_CFG0_PADCONFIG0 with address 0x000f4000 and ends
with the MAIN_PADCFG_CTRL_MMR_CFG0_PADCONFIG150 register with address
0x000f4258, as a result of which, total size of the region is 0x25c
instead of 0x2ac.
Reference Docs
TRM (AM62A) - https://www.ti.com/lit/ug/spruj16b/spruj16b.pdf
TRM (AM62D) - https://www.ti.com/lit/ug/sprujd4/sprujd4.pdf
Fixes: 5fc6b1b62639c ("arm64: dts: ti: Introduce AM62A7 family of SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250903062513.813925-2-p-bhagat@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yang Shi <yang@os.amperecomputing.com>
Date: Thu Oct 16 15:57:28 2025 -0400
arm64: kprobes: call set_memory_rox() for kprobe page
[ Upstream commit 195a1b7d8388c0ec2969a39324feb8bebf9bb907 ]
The kprobe page is allocated by execmem allocator with ROX permission.
It needs to call set_memory_rox() to set proper permission for the
direct map too. It was missed.
Fixes: 10d5e97c1bf8 ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
[ kept existing __vmalloc_node_range() instead of upstream's execmem_alloc() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu Oct 16 21:25:22 2025 -0400
arm64: mte: Do not flag the zero page as PG_mte_tagged
[ Upstream commit f620d66af3165838bfa845dcf9f5f9b4089bf508 ]
Commit 68d54ceeec0e ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the
zero page") attempted to fix ptrace() reading of tags from the zero page
by marking it as PG_mte_tagged during cpu_enable_mte(). The same commit
also changed the ptrace() tag access permission check to the VM_MTE vma
flag while turning the page flag test into a WARN_ON_ONCE().
Attempting to set the PG_mte_tagged flag early with
CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled may either hang (after commit
d77e59a8fccd "arm64: mte: Lock a page for MTE tag initialisation") or
have the flags cleared later during page_alloc_init_late(). In addition,
pages_identical() -> memcmp_pages() will reject any comparison with the
zero page as it is marked as tagged.
Partially revert the above commit to avoid setting PG_mte_tagged on the
zero page. Update the __access_remote_tags() warning on untagged pages
to ignore the zero page since it is known to have the tags initialised.
Note that all user mapping of the zero page are marked as pte_special().
The arm64 set_pte_at() will not call mte_sync_tags() on such pages, so
PG_mte_tagged will remain cleared.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 68d54ceeec0e ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page")
Reported-by: Gergely Kovacs <Gergely.Kovacs2@arm.com>
Cc: stable@vger.kernel.org # 5.10.x
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <lance.yang@linux.dev>
Acked-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Will Deacon <will@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Tue Sep 2 15:59:43 2025 +0800
ARM: OMAP2+: pm33xx-core: ix device node reference leaks in amx3_idle_init
commit 74139a64e8cedb6d971c78d5d17384efeced1725 upstream.
Add missing of_node_put() calls to release
device node references obtained via of_parse_phandle().
Fixes: 06ee7a950b6a ("ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250902075943.2408832-1-linmq006@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Varad Gautam <varadgautam@google.com>
Date: Sun Mar 30 16:42:29 2025 +0000
asm-generic/io.h: Skip trace helpers if rwmmio events are disabled
commit 8327bd4fcb6c1dab01ce5c6ff00b42496836dcd2 upstream.
With `CONFIG_TRACE_MMIO_ACCESS=y`, the `{read,write}{b,w,l,q}{_relaxed}()`
mmio accessors unconditionally call `log_{post_}{read,write}_mmio()`
helpers, which in turn call the ftrace ops for `rwmmio` trace events
This adds a performance penalty per mmio accessor call, even when
`rwmmio` events are disabled at runtime (~80% overhead on local
measurement).
Guard these with `tracepoint_enabled()`.
Signed-off-by: Varad Gautam <varadgautam@google.com>
Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Date: Thu Oct 2 16:57:50 2025 +0300
ASoC: SOF: ipc4-topology: Correct the minimum host DMA buffer size
[ Upstream commit a7fe5ff832d61d9393095bc3dd5f06f4af7da3c1 ]
The firmware has changed the minimum host buffer size from 2 periods to
4 periods (1 period is 1ms) which was missed by the kernel side.
Adjust the SOF_IPC4_MIN_DMA_BUFFER_SIZE to 4 ms to align with firmware.
Link: https://github.com/thesofproject/sof/commit/f0a14a3f410735db18a79eb7a5f40dc49fdee7a7
Fixes: 594c1bb9ff73 ("ASoC: SOF: ipc4-topology: Do not parse the DMA_BUFFER_SIZE token")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Wed Sep 10 14:30:45 2025 +0800
blk-crypto: fix missing blktrace bio split events
commit 06d712d297649f48ebf1381d19bd24e942813b37 upstream.
trace_block_split() is missing, resulting in blktrace inability to catch
BIO split events and making it harder to analyze the BIO sequence.
Cc: stable@vger.kernel.org
Fixes: 488f6682c832 ("block: blk-crypto-fallback for Inline Encryption")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: KaFai Wan <kafai.wan@linux.dev>
Date: Wed Oct 8 18:26:26 2025 +0800
bpf: Avoid RCU context warning when unpinning htab with internal structs
[ Upstream commit 4f375ade6aa9f37fd72d7a78682f639772089eed ]
When unpinning a BPF hash table (htab or htab_lru) that contains internal
structures (timer, workqueue, or task_work) in its values, a BUG warning
is triggered:
BUG: sleeping function called from invalid context at kernel/bpf/hashtab.c:244
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: ksoftirqd/0
...
The issue arises from the interaction between BPF object unpinning and
RCU callback mechanisms:
1. BPF object unpinning uses ->free_inode() which schedules cleanup via
call_rcu(), deferring the actual freeing to an RCU callback that
executes within the RCU_SOFTIRQ context.
2. During cleanup of hash tables containing internal structures,
htab_map_free_internal_structs() is invoked, which includes
cond_resched() or cond_resched_rcu() calls to yield the CPU during
potentially long operations.
However, cond_resched() or cond_resched_rcu() cannot be safely called from
atomic RCU softirq context, leading to the BUG warning when attempting
to reschedule.
Fix this by changing from ->free_inode() to ->destroy_inode() and rename
bpf_free_inode() to bpf_destroy_inode() for BPF objects (prog, map, link).
This allows direct inode freeing without RCU callback scheduling,
avoiding the invalid context warning.
Reported-by: Le Chen <tom2cat@sjtu.edu.cn>
Closes: https://lore.kernel.org/all/1444123482.1827743.1750996347470.JavaMail.zimbra@sjtu.edu.cn/
Fixes: 68134668c17f ("bpf: Add map side support for bpf timers.")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251008102628.808045-2-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Borkmann <daniel@iogearbox.net>
Date: Fri Oct 3 09:34:18 2025 +0200
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
[ Upstream commit 23f3770e1a53e6c7a553135011f547209e141e72 ]
Cilium has a BPF egress gateway feature which forces outgoing K8s Pod
traffic to pass through dedicated egress gateways which then SNAT the
traffic in order to interact with stable IPs outside the cluster.
The traffic is directed to the gateway via vxlan tunnel in collect md
mode. A recent BPF change utilized the bpf_redirect_neigh() helper to
forward packets after the arrival and decap on vxlan, which turned out
over time that the kmalloc-256 slab usage in kernel was ever-increasing.
The issue was that vxlan allocates the metadata_dst object and attaches
it through a fake dst entry to the skb. The latter was never released
though given bpf_redirect_neigh() was merely setting the new dst entry
via skb_dst_set() without dropping an existing one first.
Fixes: b4ab31414970 ("bpf: Add redirect_neigh helper as redirect drop-in")
Reported-by: Yusuke Suzuki <yusuke.suzuki@isovalent.com>
Reported-by: Julian Wiedmann <jwi@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jordan Rife <jrife@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jordan Rife <jrife@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20251003073418.291171-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Woudstra <ericwouds@gmail.com>
Date: Tue Oct 7 10:15:01 2025 +0200
bridge: br_vlan_fill_forward_path_pvid: use br_vlan_group_rcu()
[ Upstream commit bbf0c98b3ad9edaea1f982de6c199cc11d3b7705 ]
net/bridge/br_private.h:1627 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
7 locks held by socat/410:
#0: ffff88800d7a9c90 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_stream_connect+0x43/0xa0
#1: ffffffff9a779900 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x62/0x1830
[..]
#6: ffffffff9a779900 (rcu_read_lock){....}-{1:3}, at: nf_hook.constprop.0+0x8a/0x440
Call Trace:
lockdep_rcu_suspicious.cold+0x4f/0xb1
br_vlan_fill_forward_path_pvid+0x32c/0x410 [bridge]
br_fill_forward_path+0x7a/0x4d0 [bridge]
Use to correct helper, non _rcu variant requires RTNL mutex.
Fixes: bcf2766b1377 ("net: bridge: resolve forwarding path for VLAN tag actions in bridge devices")
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anderson Nascimento <anderson@allelesecurity.com>
Date: Mon Sep 8 09:49:02 2025 -0300
btrfs: avoid potential out-of-bounds in btrfs_encode_fh()
commit dff4f9ff5d7f289e4545cc936362e01ed3252742 upstream.
The function btrfs_encode_fh() does not properly account for the three
cases it handles.
Before writing to the file handle (fh), the function only returns to the
user BTRFS_FID_SIZE_NON_CONNECTABLE (5 dwords, 20 bytes) or
BTRFS_FID_SIZE_CONNECTABLE (8 dwords, 32 bytes).
However, when a parent exists and the root ID of the parent and the
inode are different, the function writes BTRFS_FID_SIZE_CONNECTABLE_ROOT
(10 dwords, 40 bytes).
If *max_len is not large enough, this write goes out of bounds because
BTRFS_FID_SIZE_CONNECTABLE_ROOT is greater than
BTRFS_FID_SIZE_CONNECTABLE originally returned.
This results in an 8-byte out-of-bounds write at
fid->parent_root_objectid = parent_root_id.
A previous attempt to fix this issue was made but was lost.
https://lore.kernel.org/all/4CADAEEC020000780001B32C@vpn.id2.novell.com/
Although this issue does not seem to be easily triggerable, it is a
potential memory corruption bug that should be fixed. This patch
resolves the issue by ensuring the function returns the appropriate size
for all three cases and validates that *max_len is large enough before
writing any data.
Fixes: be6e8dc0ba84 ("NFS support for btrfs - v3")
CC: stable@vger.kernel.org # 3.0+
Signed-off-by: Anderson Nascimento <anderson@allelesecurity.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qu Wenruo <wqu@suse.com>
Date: Wed Oct 15 10:20:22 2025 -0400
btrfs: fix the incorrect max_bytes value for find_lock_delalloc_range()
[ Upstream commit 7b26da407420e5054e3f06c5d13271697add9423 ]
[BUG]
With my local branch to enable bs > ps support for btrfs, sometimes I
hit the following ASSERT() inside submit_one_sector():
ASSERT(block_start != EXTENT_MAP_HOLE);
Please note that it's not yet possible to hit this ASSERT() in the wild
yet, as it requires btrfs bs > ps support, which is not even in the
development branch.
But on the other hand, there is also a very low chance to hit above
ASSERT() with bs < ps cases, so this is an existing bug affect not only
the incoming bs > ps support but also the existing bs < ps support.
[CAUSE]
Firstly that ASSERT() means we're trying to submit a dirty block but
without a real extent map nor ordered extent map backing it.
Furthermore with extra debugging, the folio triggering such ASSERT() is
always larger than the fs block size in my bs > ps case.
(8K block size, 4K page size)
After some more debugging, the ASSERT() is trigger by the following
sequence:
extent_writepage()
| We got a 32K folio (4 fs blocks) at file offset 0, and the fs block
| size is 8K, page size is 4K.
| And there is another 8K folio at file offset 32K, which is also
| dirty.
| So the filemap layout looks like the following:
|
| "||" is the filio boundary in the filemap.
| "//| is the dirty range.
|
| 0 8K 16K 24K 32K 40K
| |////////| |//////////////////////||////////|
|
|- writepage_delalloc()
| |- find_lock_delalloc_range() for [0, 8K)
| | Now range [0, 8K) is properly locked.
| |
| |- find_lock_delalloc_range() for [16K, 40K)
| | |- btrfs_find_delalloc_range() returned range [16K, 40K)
| | |- lock_delalloc_folios() locked folio 0 successfully
| | |
| | | The filemap range [32K, 40K) got dropped from filemap.
| | |
| | |- lock_delalloc_folios() failed with -EAGAIN on folio 32K
| | | As the folio at 32K is dropped.
| | |
| | |- loops = 1;
| | |- max_bytes = PAGE_SIZE;
| | |- goto again;
| | | This will re-do the lookup for dirty delalloc ranges.
| | |
| | |- btrfs_find_delalloc_range() called with @max_bytes == 4K
| | | This is smaller than block size, so
| | | btrfs_find_delalloc_range() is unable to return any range.
| | \- return false;
| |
| \- Now only range [0, 8K) has an OE for it, but for dirty range
| [16K, 32K) it's dirty without an OE.
| This breaks the assumption that writepage_delalloc() will find
| and lock all dirty ranges inside the folio.
|
|- extent_writepage_io()
|- submit_one_sector() for [0, 8K)
| Succeeded
|
|- submit_one_sector() for [16K, 24K)
Triggering the ASSERT(), as there is no OE, and the original
extent map is a hole.
Please note that, this also exposed the same problem for bs < ps
support. E.g. with 64K page size and 4K block size.
If we failed to lock a folio, and falls back into the "loops = 1;"
branch, we will re-do the search using 64K as max_bytes.
Which may fail again to lock the next folio, and exit early without
handling all dirty blocks inside the folio.
[FIX]
Instead of using the fixed size PAGE_SIZE as @max_bytes, use
@sectorsize, so that we are ensured to find and lock any remaining
blocks inside the folio.
And since we're here, add an extra ASSERT() to
before calling btrfs_find_delalloc_range() to make sure the @max_bytes is
at least no smaller than a block to avoid false negative.
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ adapted folio terminology and API calls to page-based equivalents ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sumit Kumar <sumit.kumar@oss.qualcomm.com>
Date: Wed Sep 10 18:11:09 2025 +0530
bus: mhi: ep: Fix chained transfer handling in read path
commit f5225a34bd8f9f64eec37f6ae1461289aaa3eb86 upstream.
The mhi_ep_read_channel function incorrectly assumes the End of Transfer
(EOT) bit is present for each packet in a chained transactions, causing
it to advance mhi_chan->rd_offset beyond wr_offset during host-to-device
transfers when EOT has not yet arrived. This leads to access of unmapped
host memory, causing IOMMU faults and processing of stale TREs.
Modify the loop condition to ensure mhi_queue is not empty, allowing the
function to process only valid TREs up to the current write pointer to
prevent premature reads and ensure safe traversal of chained TREs.
Due to this change, buf_left needs to be removed from the while loop
condition to avoid exiting prematurely before reading the ring completely,
and also remove write_offset since it will always be zero because the new
cache buffer is allocated every time.
Fixes: 5301258899773 ("bus: mhi: ep: Add support for reading from the host")
Co-developed-by: Akhil Vinod <akhil.vinod@oss.qualcomm.com>
Signed-off-by: Akhil Vinod <akhil.vinod@oss.qualcomm.com>
Signed-off-by: Sumit Kumar <sumit.kumar@oss.qualcomm.com>
[mani: reworded description slightly]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250910-final_chained-v3-1-ec77c9d88ace@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Adam Xue <zxue@semtech.com>
Date: Fri Sep 5 10:41:18 2025 -0700
bus: mhi: host: Do not use uninitialized 'dev' pointer in mhi_init_irq_setup()
commit d0856a6dff57f95cc5d2d74e50880f01697d0cc4 upstream.
In mhi_init_irq_setup, the device pointer used for dev_err() was not
initialized. Use the pointer from mhi_cntrl instead.
Fixes: b0fc0167f254 ("bus: mhi: core: Allow shared IRQ for event rings")
Fixes: 3000f85b8f47 ("bus: mhi: core: Add support for basic PM operations")
Signed-off-by: Adam Xue <zxue@semtech.com>
[mani: reworded subject/description and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250905174118.38512-1-zxue@semtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pali Rohár <pali@kernel.org>
Date: Sat Jun 7 18:11:10 2025 +0200
cifs: Query EA $LXMOD in cifs_query_path_info() for WSL reparse points
[ Upstream commit 057ac50638bcece64b3b436d3a61b70ed6c01a34 ]
EA $LXMOD is required for WSL non-symlink reparse points.
Fixes: ef86ab131d91 ("cifs: Fix querying of WSL CHR and BLK reparse points over SMB1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Brian Masney <bmasney@redhat.com>
Date: Mon Aug 11 11:17:53 2025 -0400
clk: at91: peripheral: fix return value
[ Upstream commit 47b13635dabc14f1c2fdcaa5468b47ddadbdd1b5 ]
determine_rate() is expected to return an error code, or 0 on success.
clk_sam9x5_peripheral_determine_rate() has a branch that returns the
parent rate on a certain case. This is the behavior of round_rate(),
so let's go ahead and fix this by setting req->rate.
Fixes: b4c115c76184f ("clk: at91: clk-peripheral: add support for changeable parent rate")
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen-Yu Tsai <wenst@chromium.org>
Date: Mon Aug 25 23:09:31 2025 +0800
clk: mediatek: clk-mux: Do not pass flags to clk_mux_determine_rate_flags()
[ Upstream commit 5e121370a7ad3414c7f3a77002e2b18abe5c6fe1 ]
The `flags` in |struct mtk_mux| are core clk flags, not mux clk flags.
Passing one to the other is wrong.
Since there aren't any actual users adding CLK_MUX_* flags, just drop it
for now.
Fixes: b05ea3314390 ("clk: mediatek: clk-mux: Add .determine_rate() callback")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Thu Jul 24 10:38:28 2025 +0200
clk: mediatek: mt8195-infra_ao: Fix parent for infra_ao_hdmi_26m
[ Upstream commit 6c4c26b624790098988c1034541087e3e5ed5bed ]
The infrastructure gate for the HDMI specific crystal needs the
top_hdmi_xtal clock to be configured in order to ungate the 26m
clock to the HDMI IP, and it wouldn't work without.
Reparent the infra_ao_hdmi_26m clock to top_hdmi_xtal to fix that.
Fixes: e2edf59dec0b ("clk: mediatek: Add MT8195 infrastructure clock support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alok Tiwari <alok.a.tiwari@oracle.com>
Date: Sun Jul 6 13:11:55 2025 -0700
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
[ Upstream commit 1624dead9a4d288a594fdf19735ebfe4bb567cb8 ]
The conditional check for the PLL0 multiplier 'm' used a logical AND
instead of OR, making the range check ineffective. This patch replaces
&& with || to correctly reject invalid values of 'm' that are either
less than or equal to 0 or greater than LPC18XX_PLL0_MSEL_MAX.
This ensures proper bounds checking during clk rate setting and rounding.
Fixes: b04e0b8fd544 ("clk: add lpc18xx cgu clk driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[sboyd@kernel.org: 'm' is unsigned so remove < condition]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Brian Masney <bmasney@redhat.com>
Date: Mon Aug 11 11:18:29 2025 -0400
clk: nxp: lpc18xx-cgu: convert from round_rate() to determine_rate()
[ Upstream commit b46a3d323a5b7942e65025254c13801d0f475f02 ]
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Stable-dep-of: 1624dead9a4d ("clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fedor Pchelkin <pchelkin@ispras.ru>
Date: Sat Apr 26 15:54:28 2025 +0300
clk: tegra: do not overallocate memory for bpmp clocks
[ Upstream commit 49ef6491106209c595476fc122c3922dfd03253f ]
struct tegra_bpmp::clocks is a pointer to a dynamically allocated array
of pointers to 'struct tegra_bpmp_clk'.
But the size of the allocated area is calculated like it is an array
containing actual 'struct tegra_bpmp_clk' objects - it's not true, there
are just pointers.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: 2db12b15c6f3 ("clk: tegra: Register clocks from root to leaf")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhen Ni <zhen.ni@easystack.cn>
Date: Thu Aug 14 20:33:24 2025 +0800
clocksource/drivers/clps711x: Fix resource leaks in error paths
commit cd32e596f02fc981674573402c1138f616df1728 upstream.
The current implementation of clps711x_timer_init() has multiple error
paths that directly return without releasing the base I/O memory mapped
via of_iomap(). Fix of_iomap leaks in error paths.
Fixes: 04410efbb6bc ("clocksource/drivers/clps711x: Convert init function to return error")
Fixes: 2a6a8e2d9004 ("clocksource/drivers/clps711x: Remove board support")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250814123324.1516495-1-zhen.ni@easystack.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Simon Schuster <schuster.simon@siemens-energy.com>
Date: Mon Sep 1 15:09:50 2025 +0200
copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64)
commit 04ff48239f46e8b493571e260bd0e6c3a6400371 upstream.
With the introduction of clone3 in commit 7f192e3cd316 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit. However, the signature of the copy_*
helper functions (e.g., copy_sighand) used by copy_process was not
adapted.
As such, they truncate the flags on any 32-bit architectures that
supports clone3 (arc, arm, csky, m68k, microblaze, mips32, openrisc,
parisc32, powerpc32, riscv32, x86-32 and xtensa).
For copy_sighand with CLONE_CLEAR_SIGHAND being an actual u64
constant, this triggers an observable bug in kernel selftest
clone3_clear_sighand:
if (clone_flags & CLONE_CLEAR_SIGHAND)
in function copy_sighand within fork.c will always fail given:
unsigned long /* == uint32_t */ clone_flags
#define CLONE_CLEAR_SIGHAND 0x100000000ULL
This commit fixes the bug by always passing clone_flags to copy_sighand
via their declared u64 type, invariant of architecture-dependent integer
sizes.
Fixes: b612e5df4587 ("clone3: add CLONE_CLEAR_SIGHAND")
Cc: stable@vger.kernel.org # linux-5.5+
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-1-53fcf5577d57@siemens-energy.com
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Fri Sep 5 15:52:03 2025 +0200
cpufreq: intel_pstate: Fix object lifecycle issue in update_qos_request()
commit 69e5d50fcf4093fb3f9f41c4f931f12c2ca8c467 upstream.
The cpufreq_cpu_put() call in update_qos_request() takes place too early
because the latter subsequently calls freq_qos_update_request() that
indirectly accesses the policy object in question through the QoS request
object passed to it.
Fortunately, update_qos_request() is called under intel_pstate_driver_lock,
so this issue does not matter for changing the intel_pstate operation
mode, but it theoretically can cause a crash to occur on CPU device hot
removal (which currently can only happen in virt, but it is formally
supported nevertheless).
Address this issue by modifying update_qos_request() to drop the
reference to the policy later.
Fixes: da5c504c7aae ("cpufreq: intel_pstate: Implement QoS supported freq constraints")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Link: https://patch.msgid.link/2255671.irdbgypaU6@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Aaron Kling <webgeek1234@gmail.com>
Date: Thu Aug 28 21:48:12 2025 -0500
cpufreq: tegra186: Set target frequency for all cpus in policy
[ Upstream commit 0b1bb980fd7cae126ee3d59f817068a13e321b07 ]
The original commit set all cores in a cluster to a shared policy, but
did not update set_target to apply a frequency change to all cores for
the policy. This caused most cores to remain stuck at their boot
frequency.
Fixes: be4ae8c19492 ("cpufreq: tegra186: Share policy per cluster")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Sat Aug 30 19:01:01 2025 +0900
cramfs: Verify inode mode when loading from disk
[ Upstream commit 7f9d34b0a7cb93d678ee7207f0634dbf79e47fe5 ]
The inode mode loaded from corrupted disk can be invalid. Do like what
commit 0a9e74051313 ("isofs: Verify inode mode when loading from disk")
does.
Reported-by: syzbot <syzbot+895c23f6917da440ed0d@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=895c23f6917da440ed0d
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/429b3ef1-13de-4310-9a8e-c2dc9a36234a@I-love.SAKURA.ne.jp
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Fourier <fourier.thomas@gmail.com>
Date: Wed Sep 10 10:22:31 2025 +0200
crypto: aspeed - Fix dma_unmap_sg() direction
commit 838d2d51513e6d2504a678e906823cfd2ecaaa22 upstream.
It seems like everywhere in this file, when the request is not
bidirectionala, req->src is mapped with DMA_TO_DEVICE and req->dst is
mapped with DMA_FROM_DEVICE.
Fixes: 62f58b1637b7 ("crypto: aspeed - add HACE crypto driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Fourier <fourier.thomas@gmail.com>
Date: Wed Sep 3 10:34:46 2025 +0200
crypto: atmel - Fix dma_unmap_sg() direction
commit f5d643156ef62216955c119216d2f3815bd51cb1 upstream.
It seems like everywhere in this file, dd->in_sg is mapped with
DMA_TO_DEVICE and dd->out_sg is mapped with DMA_FROM_DEVICE.
Fixes: 13802005d8f2 ("crypto: atmel - add Atmel DES/TDES driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Wed Oct 8 15:54:20 2025 +0800
crypto: essiv - Check ssize for decryption and in-place encryption
[ Upstream commit 6bb73db6948c2de23e407fe1b7ef94bf02b7529f ]
Move the ssize check to the start in essiv_aead_crypt so that
it's also checked for decryption and in-place encryption.
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Fixes: be1eb7f78aa8 ("crypto: essiv - create wrapper template for ESSIV generation")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Fourier <fourier.thomas@gmail.com>
Date: Wed Sep 3 10:06:46 2025 +0200
crypto: rockchip - Fix dma_unmap_sg() nents value
commit 21140e5caf019e4a24e1ceabcaaa16bd693b393f upstream.
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 57d67c6e8219 ("crypto: rockchip - rework by using crypto_engine")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Timur Kristóf <timur.kristof@gmail.com>
Date: Thu Sep 25 20:45:22 2025 +0200
drm/amd/display: Add missing DCE6 SCL_HORZ_FILTER_INIT* SRIs
[ Upstream commit d60f9c45d1bff7e20ecd57492ef7a5e33c94a37c ]
Without these, it's impossible to program these registers.
Fixes: 102b2f587ac8 ("drm/amd/display: dce_transform: DCE6 Scaling Horizontal Filter Init (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Timur Kristóf <timur.kristof@gmail.com>
Date: Thu Sep 25 20:45:23 2025 +0200
drm/amd/display: Properly clear SCL_*_FILTER_CONTROL on DCE6
[ Upstream commit c0aa7cf49dd6cb302fe28e7183992b772cb7420c ]
Previously, the code would set a bit field which didn't exist
on DCE6 so it would be effectively a no-op.
Fixes: b70aaf5586f2 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Timur Kristóf <timur.kristof@gmail.com>
Date: Thu Sep 25 20:45:24 2025 +0200
drm/amd/display: Properly disable scaling on DCE6
[ Upstream commit a7dc87f3448bea5ebe054f14e861074b9c289c65 ]
SCL_SCALER_ENABLE can be used to enable/disable the scaler
on DCE6. Program it to 0 when scaling isn't used, 1 when used.
Additionally, clear some other registers when scaling is
disabled and program the SCL_UPDATE register as recommended.
This fixes visible glitches for users whose BIOS sets up a
mode with scaling at boot, which DC was unable to clean up.
Fixes: b70aaf5586f2 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alex Deucher <alexander.deucher@amd.com>
Date: Thu Sep 25 20:45:21 2025 +0200
drm/amdgpu: Add additional DCE6 SCL registers
[ Upstream commit 507296328b36ffd00ec1f4fde5b8acafb7222ec7 ]
Fixes: 102b2f587ac8 ("drm/amd/display: dce_transform: DCE6 Scaling Horizontal Filter Init (v2)")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shuhao Fu <sfual@cse.ust.hk>
Date: Wed Oct 8 00:17:09 2025 +0800
drm/nouveau: fix bad ret code in nouveau_bo_move_prep
commit e4bea919584ff292c9156cf7d641a2ab3cbe27b0 upstream.
In `nouveau_bo_move_prep`, if `nouveau_mem_map` fails, an error code
should be returned. Currently, it returns zero even if vmm addr is not
correctly mapped.
Cc: stable@vger.kernel.org
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Fixes: 9ce523cc3bf2 ("drm/nouveau: separate buffer object backing memory from nvkm structures")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Marek Vasut <marek.vasut+renesas@mailbox.org>
Date: Wed Aug 13 23:08:13 2025 +0200
drm/rcar-du: dsi: Fix 1/2/3 lane support
commit d83f1d19c898ac1b54ae64d1c950f5beff801982 upstream.
Remove fixed PPI lane count setup. The R-Car DSI host is capable
of operating in 1..4 DSI lane mode. Remove the hard-coded 4-lane
configuration from PPI register settings and instead configure
the PPI lane count according to lane count information already
obtained by this driver instance.
Configure TXSETR register to match PPI lane count. The R-Car V4H
Reference Manual R19UH0186EJ0121 Rev.1.21 section 67.2.2.3 Tx Set
Register (TXSETR), field LANECNT description indicates that the
TXSETR register LANECNT bitfield lane count must be configured
such, that it matches lane count configuration in PPISETR register
DLEN bitfield. Make sure the LANECNT and DLEN bitfields are
configured to match.
Fixes: 155358310f01 ("drm: rcar-du: Add R-Car DSI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250813210840.97621-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zack Rusin <zack.rusin@broadcom.com>
Date: Wed Sep 17 11:36:55 2025 -0400
drm/vmwgfx: Fix a null-ptr access in the cursor snooper
[ Upstream commit 5ac2c0279053a2c5265d46903432fb26ae2d0da2 ]
Check that the resource which is converted to a surface exists before
trying to use the cursor snooper on it.
vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers
because some svga commands accept SVGA3D_INVALID_ID to mean "no surface",
unfortunately functions that accept the actual surfaces as objects might
(and in case of the cursor snooper, do not) be able to handle null
objects. Make sure that we validate not only the identifier (via the
vmw_cmd_res_check) but also check that the actual resource exists before
trying to do something with it.
Fixes unchecked null-ptr reference in the snooping code.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: c0951b797e7d ("drm/vmwgfx: Refactor resource management")
Reported-by: Kuzey Arda Bulut <kuzeyardabulut@gmail.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://lore.kernel.org/r/20250917153655.1968583-1-zack.rusin@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ian Forbes <ian.forbes@broadcom.com>
Date: Fri Sep 26 14:54:26 2025 -0500
drm/vmwgfx: Fix copy-paste typo in validation
[ Upstream commit 228c5d44dffe8c293cd2d2f0e7ea45e64565b1c4 ]
'entry' should be 'val' which is the loop iterator.
Fixes: 9e931f2e0970 ("drm/vmwgfx: Refactor resource validation hashtable to use linux/hashtable implementation.")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250926195427.1405237-2-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ian Forbes <ian.forbes@broadcom.com>
Date: Fri Sep 26 14:54:25 2025 -0500
drm/vmwgfx: Fix Use-after-free in validation
[ Upstream commit dfe1323ab3c8a4dd5625ebfdba44dc47df84512a ]
Nodes stored in the validation duplicates hashtable come from an arena
allocator that is cleared at the end of vmw_execbuf_process. All nodes
are expected to be cleared in vmw_validation_drop_ht but this node escaped
because its resource was destroyed prematurely.
Fixes: 64ad2abfe9a6 ("drm/vmwgfx: Adapt validation code for reference-free lookups")
Reported-by: Kuzey Arda Bulut <kuzeyardabulut@gmail.com>
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250926195427.1405237-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Riesch <michael.riesch@collabora.com>
Date: Wed Sep 3 19:04:50 2025 +0200
dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required
commit c254815b02673cc77a84103c4c0d6197bd90c0ef upstream.
There are variants of the Rockchip Innosilicon CSI DPHY (e.g., the RK3568
variant) that are powered on by default as they are part of the ALIVE power
domain.
Remove 'power-domains' from the required properties in order to avoid false
positives.
Fixes: 22c8e0a69b7f ("dt-bindings: phy: add compatible for rk356x to rockchip-inno-csi-dphy")
Cc: stable@kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-2-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Date: Fri Sep 5 13:44:46 2025 +0530
ext4: correctly handle queries for metadata mappings
commit 46c22a8bb4cb03211da1100d7ee4a2005bf77c70 upstream.
Currently, our handling of metadata is _ambiguous_ in some scenarios,
that is, we end up returning unknown if the range only covers the
mapping partially.
For example, in the following case:
$ xfs_io -c fsmap -d
0: 254:16 [0..7]: static fs metadata 8
1: 254:16 [8..15]: special 102:1 8
2: 254:16 [16..5127]: special 102:2 5112
3: 254:16 [5128..5255]: special 102:3 128
4: 254:16 [5256..5383]: special 102:4 128
5: 254:16 [5384..70919]: inodes 65536
6: 254:16 [70920..70967]: unknown 48
...
$ xfs_io -c fsmap -d 24 33
0: 254:16 [24..39]: unknown 16 <--- incomplete reporting
$ xfs_io -c fsmap -d 24 33 (With patch)
0: 254:16 [16..5127]: special 102:2 5112
This is because earlier in ext4_getfsmap_meta_helper, we end up ignoring
any extent that starts before our queried range, but overlaps it. While
the man page [1] is a bit ambiguous on this, this fix makes the output
make more sense since we are anyways returning an "unknown" extent. This
is also consistent to how XFS does it:
$ xfs_io -c fsmap -d
...
6: 254:16 [104..127]: free space 24
7: 254:16 [128..191]: inodes 64
...
$ xfs_io -c fsmap -d 137 150
0: 254:16 [128..191]: inodes 64 <-- full extent returned
[1] https://man7.org/linux/man-pages/man2/ioctl_getfsmap.2.html
Reported-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <023f37e35ee280cd9baac0296cbadcbe10995cab.1757058211.git.ojaswin@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhang Yi <yi.zhang@huawei.com>
Date: Fri Sep 12 18:58:41 2025 +0800
ext4: fix an off-by-one issue during moving extents
commit 12e803c8827d049ae8f2c743ef66ab87ae898375 upstream.
During the movement of a written extent, mext_page_mkuptodate() is
called to read data in the range [from, to) into the page cache and to
update the corresponding buffers. Therefore, we should not wait on any
buffer whose start offset is >= 'to'. Otherwise, it will return -EIO and
fail the extents movement.
$ for i in `seq 3 -1 0`; \
do xfs_io -fs -c "pwrite -b 1024 $((i * 1024)) 1024" /mnt/foo; \
done
$ umount /mnt && mount /dev/pmem1s /mnt # drop cache
$ e4defrag /mnt/foo
e4defrag 1.47.0 (5-Feb-2023)
ext4 defragmentation for /mnt/foo
[1/1]/mnt/foo: 0% [ NG ]
Success: [0/1]
Cc: stable@kernel.org
Fixes: a40759fb16ae ("ext4: remove array of buffer_heads from mext_page_mkuptodate()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250912105841.1886799-1-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jan Kara <jack@suse.cz>
Date: Tue Oct 7 15:49:37 2025 +0200
ext4: free orphan info with kvfree
commit 971843c511c3c2f6eda96c6b03442913bfee6148 upstream.
Orphan info is now getting allocated with kvmalloc_array(). Free it with
kvfree() instead of kfree() to avoid complaints from mm.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 0a6ce20c1564 ("ext4: verify orphan file size is not too big")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Message-ID: <20251007134936.7291-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ahmet Eray Karadag <eraykrdg1@gmail.com>
Date: Sat Sep 20 05:13:43 2025 +0300
ext4: guard against EA inode refcount underflow in xattr update
commit 57295e835408d8d425bef58da5253465db3d6888 upstream.
syzkaller found a path where ext4_xattr_inode_update_ref() reads an EA
inode refcount that is already <= 0 and then applies ref_change (often
-1). That lets the refcount underflow and we proceed with a bogus value,
triggering errors like:
EXT4-fs error: EA inode <n> ref underflow: ref_count=-1 ref_change=-1
EXT4-fs warning: ea_inode dec ref err=-117
Make the invariant explicit: if the current refcount is non-positive,
treat this as on-disk corruption, emit ext4_error_inode(), and fail the
operation with -EFSCORRUPTED instead of updating the refcount. Delete the
WARN_ONCE() as negative refcounts are now impossible; keep error reporting
in ext4_error_inode().
This prevents the underflow and the follow-on orphan/cleanup churn.
Reported-by: syzbot+0be4f339a8218d2a5bb1@syzkaller.appspotmail.com
Fixes: https://syzbot.org/bug?extid=0be4f339a8218d2a5bb1
Cc: stable@kernel.org
Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com>
Message-ID: <20250920021342.45575-1-eraykrdg1@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yongjian Sun <sunyongjian1@huawei.com>
Date: Thu Sep 11 21:30:24 2025 +0800
ext4: increase i_disksize to offset + len in ext4_update_disksize_before_punch()
commit 9d80eaa1a1d37539224982b76c9ceeee736510b9 upstream.
After running a stress test combined with fault injection,
we performed fsck -a followed by fsck -fn on the filesystem
image. During the second pass, fsck -fn reported:
Inode 131512, end of extent exceeds allowed value
(logical block 405, physical block 1180540, len 2)
This inode was not in the orphan list. Analysis revealed the
following call chain that leads to the inconsistency:
ext4_da_write_end()
//does not update i_disksize
ext4_punch_hole()
//truncate folio, keep size
ext4_page_mkwrite()
ext4_block_page_mkwrite()
ext4_block_write_begin()
ext4_get_block()
//insert written extent without update i_disksize
journal commit
echo 1 > /sys/block/xxx/device/delete
da-write path updates i_size but does not update i_disksize. Then
ext4_punch_hole truncates the da-folio yet still leaves i_disksize
unchanged(in the ext4_update_disksize_before_punch function, the
condition offset + len < size is met). Then ext4_page_mkwrite sees
ext4_nonda_switch return 1 and takes the nodioread_nolock path, the
folio about to be written has just been punched out, and it’s offset
sits beyond the current i_disksize. This may result in a written
extent being inserted, but again does not update i_disksize. If the
journal gets committed and then the block device is yanked, we might
run into this. It should be noted that replacing ext4_punch_hole with
ext4_zero_range in the call sequence may also trigger this issue, as
neither will update i_disksize under these circumstances.
To fix this, we can modify ext4_update_disksize_before_punch to
increase i_disksize to min(i_size, offset + len) when both i_size and
(offset + len) are greater than i_disksize.
Cc: stable@kernel.org
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Message-ID: <20250911133024.1841027-1-sunyongjian@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Deepanshu Kartikey <kartikey406@gmail.com>
Date: Tue Sep 23 19:02:45 2025 +0530
ext4: validate ea_ino and size in check_xattrs
commit 44d2a72f4d64655f906ba47a5e108733f59e6f28 upstream.
During xattr block validation, check_xattrs() processes xattr entries
without validating that entries claiming to use EA inodes have non-zero
sizes. Corrupted filesystems may contain xattr entries where e_value_size
is zero but e_value_inum is non-zero, indicating invalid xattr data.
Add validation in check_xattrs() to detect this corruption pattern early
and return -EFSCORRUPTED, preventing invalid xattr entries from causing
issues throughout the ext4 codebase.
Cc: stable@kernel.org
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: syzbot+4c9d23743a2409b80293@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=4c9d23743a2409b80293
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Message-ID: <20250923133245.1091761-1-kartikey406@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jan Kara <jack@suse.cz>
Date: Tue Sep 9 13:22:07 2025 +0200
ext4: verify orphan file size is not too big
commit 0a6ce20c156442a4ce2a404747bb0fb05d54eeb3 upstream.
In principle orphan file can be arbitrarily large. However orphan replay
needs to traverse it all and we also pin all its buffers in memory. Thus
filesystems with absurdly large orphan files can lead to big amounts of
memory consumed. Limit orphan file size to a sane value and also use
kvmalloc() for allocating array of block descriptor structures to avoid
large order allocations for sane but large orphan files.
Reported-by: syzbot+0b92850d68d9b12934f5@syzkaller.appspotmail.com
Fixes: 02f310fcf47f ("ext4: Speedup ext4 orphan inode handling")
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Message-ID: <20250909112206.10459-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Finn Thain <fthain@linux-m68k.org>
Date: Thu Oct 9 09:56:25 2025 +1100
fbdev: Fix logic error in "offb" name match
commit 15df28699b28d6b49dc305040c4e26a9553df07a upstream.
A regression was reported to me recently whereby /dev/fb0 had disappeared
from a PowerBook G3 Series "Wallstreet". The problem shows up when the
"video=ofonly" parameter is passed to the kernel, which is what the
bootloader does when "no video driver" is selected. The cause of the
problem is the "offb" string comparison, which got mangled when it got
refactored. Fix it.
Cc: stable@vger.kernel.org
Fixes: 93604a5ade3a ("fbdev: Handle video= parameter in video/cmdline.c")
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Johan Hovold <johan@kernel.org>
Date: Fri Jul 25 09:40:19 2025 +0200
firmware: meson_sm: fix device leak at probe
commit 8ece3173f87df03935906d0c612c2aeda9db92ca upstream.
Make sure to drop the reference to the secure monitor device taken by
of_find_device_by_node() when looking up its driver data on behalf of
other drivers (e.g. during probe).
Note that holding a reference to the platform device does not prevent
its driver data from going away so there is no point in keeping the
reference after the helper returns.
Fixes: 8cde3c2153e8 ("firmware: meson_sm: Rework driver as a proper platform driver")
Cc: stable@vger.kernel.org # 5.5
Cc: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250725074019.8765-1-johan@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Haoxiang Li <haoxiang_li2024@163.com>
Date: Tue Jul 15 17:51:20 2025 +0800
fs/ntfs3: Fix a resource leak bug in wnd_extend()
commit d68318471aa2e16222ebf492883e05a2d72b9b17 upstream.
Add put_bh() to decrease the refcount of 'bh' after the job
is finished, preventing a resource leak.
Fixes: 3f3b442b5ad2 ("fs/ntfs3: Add bitmap")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lichen Liu <lichliu@redhat.com>
Date: Fri Aug 15 20:14:59 2025 +0800
fs: Add 'initramfs_options' to set initramfs mount options
[ Upstream commit 278033a225e13ec21900f0a92b8351658f5377f2 ]
When CONFIG_TMPFS is enabled, the initial root filesystem is a tmpfs.
By default, a tmpfs mount is limited to using 50% of the available RAM
for its content. This can be problematic in memory-constrained
environments, particularly during a kdump capture.
In a kdump scenario, the capture kernel boots with a limited amount of
memory specified by the 'crashkernel' parameter. If the initramfs is
large, it may fail to unpack into the tmpfs rootfs due to insufficient
space. This is because to get X MB of usable space in tmpfs, 2*X MB of
memory must be available for the mount. This leads to an OOM failure
during the early boot process, preventing a successful crash dump.
This patch introduces a new kernel command-line parameter,
initramfs_options, which allows passing specific mount options directly
to the rootfs when it is first mounted. This gives users control over
the rootfs behavior.
For example, a user can now specify initramfs_options=size=75% to allow
the tmpfs to use up to 75% of the available memory. This can
significantly reduce the memory pressure for kdump.
Consider a practical example:
To unpack a 48MB initramfs, the tmpfs needs 48MB of usable space. With
the default 50% limit, this requires a memory pool of 96MB to be
available for the tmpfs mount. The total memory requirement is therefore
approximately: 16MB (vmlinuz) + 48MB (loaded initramfs) + 48MB (unpacked
kernel) + 96MB (for tmpfs) + 12MB (runtime overhead) ≈ 220MB.
By using initramfs_options=size=75%, the memory pool required for the
48MB tmpfs is reduced to 48MB / 0.75 = 64MB. This reduces the total
memory requirement by 32MB (96MB - 64MB), allowing the kdump to succeed
with a smaller crashkernel size, such as 192MB.
An alternative approach of reusing the existing rootflags parameter was
considered. However, a new, dedicated initramfs_options parameter was
chosen to avoid altering the current behavior of rootflags (which
applies to the final root filesystem) and to prevent any potential
regressions.
Also add documentation for the new kernel parameter "initramfs_options"
This approach is inspired by prior discussions and patches on the topic.
Ref: https://www.lightofdawn.org/blog/?viewDetailed=00128
Ref: https://landley.net/notes-2015.html#01-01-2015
Ref: https://lkml.org/lkml/2021/6/29/783
Ref: https://www.kernel.org/doc/html/latest/filesystems/ramfs-rootfs-initramfs.html#what-is-rootfs
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Link: https://lore.kernel.org/20250815121459.3391223-1-lichliu@redhat.com
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Date: Tue Aug 5 14:38:08 2025 +0200
fs: always return zero on success from replace_fd()
commit 708c04a5c2b78e22f56e2350de41feba74dfccd9 upstream.
replace_fd() returns the number of the new file descriptor through the
return value of do_dup2(). However its callers never care about the
specific returned number. In fact the caller in receive_fd_replace() treats
any non-zero return value as an error and therefore never calls
__receive_sock() for most file descriptors, which is a bug.
To fix the bug in receive_fd_replace() and to avoid the same issue
happening in future callers, signal success through a plain zero.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/lkml/20250801220215.GS222315@ZenIV/
Fixes: 173817151b15 ("fs: Expand __receive_fd() to accept existing fd")
Fixes: 42eb0d54c08a ("fs: split receive_fd_replace from __receive_fd")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/20250805-fix-receive_fd_replace-v3-1-b72ba8b34bac@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Aleksa Sarai <cyphar@cyphar.com>
Date: Thu Aug 7 03:55:23 2025 +1000
fscontext: do not consume log entries when returning -EMSGSIZE
commit 72d271a7baa7062cb27e774ac37c5459c6d20e22 upstream.
Userspace generally expects APIs that return -EMSGSIZE to allow for them
to adjust their buffer size and retry the operation. However, the
fscontext log would previously clear the message even in the -EMSGSIZE
case.
Given that it is very cheap for us to check whether the buffer is too
small before we remove the message from the ring buffer, let's just do
that instead. While we're at it, refactor some fscontext_read() into a
separate helper to make the ring buffer logic a bit easier to read.
Fixes: 007ec26cdc9f ("vfs: Implement logging through fs_context")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/20250807-fscontext-log-cleanups-v3-1-8d91d6242dc3@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Date: Wed Sep 24 16:51:29 2025 +0200
gpio: wcd934x: mark the GPIO controller as sleeping
[ Upstream commit b5f8aa8d4bde0cf3e4595af5a536da337e5f1c78 ]
The slimbus regmap passed to the GPIO driver down from MFD does not use
fast_io. This means a mutex is used for locking and thus this GPIO chip
must not be used in atomic context. Change the can_sleep switch in
struct gpio_chip to true.
Fixes: 59c324683400 ("gpio: wcd934x: Add support to wcd934x gpio controller")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qianfeng Rong <rongqianfeng@vivo.com>
Date: Mon Sep 1 21:57:25 2025 +0800
iio: dac: ad5360: use int type to store negative error codes
commit f9381ece76de999a2065d5b4fdd87fa17883978c upstream.
Change the 'ret' variable in ad5360_update_ctrl() from unsigned int to
int, as it needs to store either negative error codes or zero returned
by ad5360_write_unlocked().
Fixes: a3e2940c24d3 ("staging:iio:dac: Add AD5360 driver")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20250901135726.17601-2-rongqianfeng@vivo.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qianfeng Rong <rongqianfeng@vivo.com>
Date: Mon Sep 1 21:57:26 2025 +0800
iio: dac: ad5421: use int type to store negative error codes
commit 3379c900320954d768ed9903691fb2520926bbe3 upstream.
Change the 'ret' variable in ad5421_update_ctrl() from unsigned int to
int, as it needs to store either negative error codes or zero returned
by ad5421_write_unlocked().
Fixes: 5691b23489db ("staging:iio:dac: Add AD5421 driver")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20250901135726.17601-3-rongqianfeng@vivo.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michael Hennerich <michael.hennerich@analog.com>
Date: Fri Aug 29 12:25:43 2025 +0100
iio: frequency: adf4350: Fix ADF4350_REG3_12BIT_CLKDIV_MODE
commit 1d8fdabe19267338f29b58f968499e5b55e6a3b6 upstream.
The clk div bits (2 bits wide) do not start in bit 16 but in bit 15. Fix it
accordingly.
Fixes: e31166f0fd48 ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250829-adf4350-fix-v2-2-0bf543ba797d@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michael Hennerich <michael.hennerich@analog.com>
Date: Fri Aug 29 12:25:42 2025 +0100
iio: frequency: adf4350: Fix prescaler usage.
commit 33d7ecbf69aa7dd4145e3b77962bcb8759eede3d upstream.
The ADF4350/1 features a programmable dual-modulus prescaler of 4/5 or 8/9.
When set to 4/5, the maximum RF frequency allowed is 3 GHz.
Therefore, when operating the ADF4351 above 3 GHz, this must be set to 8/9.
In this context not the RF output frequency is meant
- it's the VCO frequency.
Therefore move the prescaler selection after we derived the VCO frequency
from the desired RF output frequency.
This BUG may have caused PLL lock instabilities when operating the VCO at
the very high range close to 4.4 GHz.
Fixes: e31166f0fd48 ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250829-adf4350-fix-v2-1-0bf543ba797d@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Nyekjaer <sean@geanix.com>
Date: Mon Sep 1 09:49:14 2025 +0200
iio: imu: inv_icm42600: Drop redundant pm_runtime reinitialization in resume
commit a95a0b4e471a6d8860f40c6ac8f1cad9dde3189a upstream.
Remove unnecessary calls to pm_runtime_disable(), pm_runtime_set_active(),
and pm_runtime_enable() from the resume path. These operations are not
required here and can interfere with proper pm_runtime state handling,
especially when resuming from a pm_runtime suspended state.
Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-2-ef1336246960@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Anderson <sean.anderson@linux.dev>
Date: Mon Jul 14 20:30:58 2025 -0400
iio: xilinx-ams: Fix AMS_ALARM_THR_DIRECT_MASK
commit 1315cc2dbd5034f566e20ddce4d675cb9e6d4ddd upstream.
AMS_ALARM_THR_DIRECT_MASK should be bit 0, not bit 1. This would cause
hysteresis to be enabled with a lower threshold of -28C. The temperature
alarm would never deassert even if the temperature dropped below the
upper threshold.
Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: Erim, Salih <Salih.Erim@amd.com>
Acked-by: Erim, Salih <Salih.Erim@amd.com>
Link: https://patch.msgid.link/20250715003058.2035656-1-sean.anderson@linux.dev
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Anderson <sean.anderson@linux.dev>
Date: Mon Jul 14 20:28:47 2025 -0400
iio: xilinx-ams: Unmask interrupts after updating alarms
commit feb500c7ae7a198db4d2757901bce562feeefa5e upstream.
To convert level-triggered alarms into edge-triggered IIO events, alarms
are masked when they are triggered. To ensure we catch subsequent
alarms, we then periodically poll to see if the alarm is still active.
If it isn't, we unmask it. Active but masked alarms are stored in
current_masked_alarm.
If an active alarm is disabled, it will remain set in
current_masked_alarm until ams_unmask_worker clears it. If the alarm is
re-enabled before ams_unmask_worker runs, then it will never be cleared
from current_masked_alarm. This will prevent the alarm event from being
pushed even if the alarm is still active.
Fix this by recalculating current_masked_alarm immediately when enabling
or disabling alarms.
Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: Erim, Salih <Salih.Erim@amd.com>
Acked-by: Erim, Salih <Salih.Erim@amd.com>
Link: https://patch.msgid.link/20250715002847.2035228-1-sean.anderson@linux.dev
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Huacai Chen <chenhuacai@kernel.org>
Date: Mon Jul 21 18:13:43 2025 +0800
init: handle bootloader identifier in kernel parameters
commit e416f0ed3c500c05c55fb62ee62662717b1c7f71 upstream.
BootLoaders (Grub, LILO, etc) may pass an identifier such as "BOOT_IMAGE=
/boot/vmlinuz-x.y.z" to kernel parameters. But these identifiers are not
recognized by the kernel itself so will be passed to userspace. However
user space init program also don't recognize it.
KEXEC/KDUMP (kexec-tools) may also pass an identifier such as "kexec" on
some architectures.
We cannot change BootLoader's behavior, because this behavior exists for
many years, and there are already user space programs search BOOT_IMAGE=
in /proc/cmdline to obtain the kernel image locations:
https://github.com/linuxdeepin/deepin-ab-recovery/blob/master/util.go
(search getBootOptions)
https://github.com/linuxdeepin/deepin-ab-recovery/blob/master/main.go
(search getKernelReleaseWithBootOption) So the the best way is handle
(ignore) it by the kernel itself, which can avoid such boot warnings (if
we use something like init=/bin/bash, bootloader identifier can even cause
a crash):
Kernel command line: BOOT_IMAGE=(hd0,1)/vmlinuz-6.x root=/dev/sda3 ro console=tty
Unknown kernel command line parameters "BOOT_IMAGE=(hd0,1)/vmlinuz-6.x", will be passed to user space.
[chenhuacai@loongson.cn: use strstarts()]
Link: https://lkml.kernel.org/r/20250815090120.1569947-1-chenhuacai@loongson.cn
Link: https://lkml.kernel.org/r/20250721101343.3283480-1-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lu Baolu <baolu.lu@linux.intel.com>
Date: Thu Sep 18 13:02:02 2025 +0800
iommu/vt-d: PRS isn't usable if PDS isn't supported
commit 5ef7e24c742038a5d8c626fdc0e3a21834358341 upstream.
The specification, Section 7.10, "Software Steps to Drain Page Requests &
Responses," requires software to submit an Invalidation Wait Descriptor
(inv_wait_dsc) with the Page-request Drain (PD=1) flag set, along with
the Invalidation Wait Completion Status Write flag (SW=1). It then waits
for the Invalidation Wait Descriptor's completion.
However, the PD field in the Invalidation Wait Descriptor is optional, as
stated in Section 6.5.2.9, "Invalidation Wait Descriptor":
"Page-request Drain (PD): Remapping hardware implementations reporting
Page-request draining as not supported (PDS = 0 in ECAP_REG) treat this
field as reserved."
This implies that if the IOMMU doesn't support the PDS capability, software
can't drain page requests and group responses as expected.
Do not enable PCI/PRI if the IOMMU doesn't support PDS.
Reported-by: Joel Granados <joel.granados@kernel.org>
Closes: https://lore.kernel.org/r/20250909-jag-pds-v1-1-ad8cba0e494e@kernel.org
Fixes: 66ac4db36f4c ("iommu/vt-d: Add page request draining support")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20250915062946.120196-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Guenter Roeck <linux@roeck-us.net>
Date: Thu Oct 16 13:50:06 2025 -0500
ipmi: Fix handling of messages with provided receive message pointer
commit e2c69490dda5d4c9f1bfbb2898989c8f3530e354 upstream
Prior to commit b52da4054ee0 ("ipmi: Rework user message limit handling"),
i_ipmi_request() used to increase the user reference counter if the receive
message is provided by the caller of IPMI API functions. This is no longer
the case. However, ipmi_free_recv_msg() is still called and decreases the
reference counter. This results in the reference counter reaching zero,
the user data pointer is released, and all kinds of interesting crashes are
seen.
Fix the problem by increasing user reference counter if the receive message
has been provided by the caller.
Fixes: b52da4054ee0 ("ipmi: Rework user message limit handling")
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20251006201857.3433837-1-linux@roeck-us.net>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Corey Minyard <corey@minyard.net>
Date: Thu Oct 16 13:50:05 2025 -0500
ipmi: Rework user message limit handling
commit b52da4054ee0bf9ecb44996f2c83236ff50b3812 upstream
This patch required quite a bit of work to backport due to a number
of unrelated changes that do not make sense to backport. This has
been run against my test suite and passes all tests.
The limit on the number of user messages had a number of issues,
improper counting in some cases and a use after free.
Restructure how this is all done to handle more in the receive message
allocation routine, so all refcouting and user message limit counts
are done in that routine. It's a lot cleaner and safer.
Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Closes: https://lore.kernel.org/lkml/aLsw6G0GyqfpKs2S@mail.minyard.net/
Fixes: 8e76741c3d8b ("ipmi: Add a limit on the number of users that may use IPMI")
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: Corey Minyard <corey@minyard.net>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lucas Zampieri <lzampier@redhat.com>
Date: Tue Sep 23 15:43:19 2025 +0100
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
[ Upstream commit f75e07bf5226da640fa99a0594687c780d9bace4 ]
According to the PLIC specification[1], global interrupt sources are
assigned small unsigned integer identifiers beginning at the value 1.
An interrupt ID of 0 is reserved to mean "no interrupt".
The current plic_irq_resume() and plic_irq_suspend() functions incorrectly
start the loop from index 0, which accesses the register space for the
reserved interrupt ID 0.
Change the loop to start from index 1, skipping the reserved
interrupt ID 0 as per the PLIC specification.
This prevents potential undefined behavior when accessing the reserved
register space during suspend/resume cycles.
Fixes: e80f0b6a2cf3 ("irqchip/irq-sifive-plic: Add syscore callbacks for hibernation")
Co-developed-by: Jia Wang <wangjia@ultrarisc.com>
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Co-developed-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://github.com/riscv/riscv-plic-spec/releases/tag/1.0.0
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hongbo Li <lihongbo22@huawei.com>
Date: Mon Sep 2 21:08:24 2024 +0800
irqchip/sifive-plic: Make use of __assign_bit()
[ Upstream commit 40d7af5375a4e27d8576d9d11954ac213d06f09e ]
Replace the open coded
if (foo)
__set_bit(n, bar);
else
__clear_bit(n, bar);
with __assign_bit(). No functional change intended.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/all/20240902130824.2878644-1-lihongbo22@huawei.com
Stable-dep-of: f75e07bf5226 ("irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Oleg Nesterov <oleg@redhat.com>
Date: Mon Sep 15 14:09:17 2025 +0200
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
commit a15f37a40145c986cdf289a4b88390f35efdecc4 upstream.
The usage of task_lock(tsk->group_leader) in sys_prlimit64()->do_prlimit()
path is very broken.
sys_prlimit64() does get_task_struct(tsk) but this only protects task_struct
itself. If tsk != current and tsk is not a leader, this process can exit/exec
and task_lock(tsk->group_leader) may use the already freed task_struct.
Another problem is that sys_prlimit64() can race with mt-exec which changes
->group_leader. In this case do_prlimit() may take the wrong lock, or (worse)
->group_leader may change between task_lock() and task_unlock().
Change sys_prlimit64() to take tasklist_lock when necessary. This is not
nice, but I don't see a better fix for -stable.
Link: https://lkml.kernel.org/r/20250915120917.GA27702@redhat.com
Fixes: 18c91bb2d872 ("prlimit: do not grab the tasklist_lock")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Biggers <ebiggers@kernel.org>
Date: Sat Aug 9 10:19:39 2025 -0700
KEYS: trusted_tpm1: Compare HMAC values in constant time
commit eed0e3d305530066b4fc5370107cff8ef1a0d229 upstream.
To prevent timing attacks, HMAC value comparison needs to be constant
time. Replace the memcmp() with the correct function, crypto_memneq().
[For the Fixes commit I used the commit that introduced the memcmp().
It predates the introduction of crypto_memneq(), but it was still a bug
at the time even though a helper function didn't exist yet.]
Fixes: d00a1c72f7f4 ("keys: add new trusted key-type")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Tue Oct 14 10:46:46 2025 -0400
ksmbd: add max ip connections parameter
[ Upstream commit d8b6dc9256762293048bf122fc11c4e612d0ef5d ]
This parameter set the maximum number of connections per ip address.
The default is 8.
Cc: stable@vger.kernel.org
Fixes: c0d41112f1a5 ("ksmbd: extend the connection limiting mechanism to support IPv6")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ Adjust reserved room ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Thu Oct 16 09:00:21 2025 -0400
KVM: SVM: Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2
[ Upstream commit 68e61f6fd65610e73b17882f86fedfd784d99229 ]
Emulate PERF_CNTR_GLOBAL_STATUS_SET when PerfMonV2 is enumerated to the
guest, as the MSR is supposed to exist in all AMD v2 PMUs.
Fixes: 4a2771895ca6 ("KVM: x86/svm/pmu: Add AMD PerfMonV2 support")
Cc: stable@vger.kernel.org
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20250711172746.1579423-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
[ changed global_status_rsvd field to global_status_mask ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Tue Oct 14 10:48:51 2025 -0400
KVM: SVM: Skip fastpath emulation on VM-Exit if next RIP isn't valid
[ Upstream commit 0910dd7c9ad45a2605c45fd2bf3d1bcac087687c ]
Skip the WRMSR and HLT fastpaths in SVM's VM-Exit handler if the next RIP
isn't valid, e.g. because KVM is running with nrips=false. SVM must
decode and emulate to skip the instruction if the CPU doesn't provide the
next RIP, and getting the instruction bytes to decode requires reading
guest memory. Reading guest memory through the emulator can fault, i.e.
can sleep, which is disallowed since the fastpath handlers run with IRQs
disabled.
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:106
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 32611, name: qemu
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
irq event stamp: 30580
hardirqs last enabled at (30579): [<ffffffffc08b2527>] vcpu_run+0x1787/0x1db0 [kvm]
hardirqs last disabled at (30580): [<ffffffffb4f62e32>] __schedule+0x1e2/0xed0
softirqs last enabled at (30570): [<ffffffffb4247a64>] fpu_swap_kvm_fpstate+0x44/0x210
softirqs last disabled at (30568): [<ffffffffb4247a64>] fpu_swap_kvm_fpstate+0x44/0x210
CPU: 298 UID: 0 PID: 32611 Comm: qemu Tainted: G U 6.16.0-smp--e6c618b51cfe-sleep #782 NONE
Tainted: [U]=USER
Hardware name: Google Astoria-Turin/astoria, BIOS 0.20241223.2-0 01/17/2025
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xb0
__might_resched+0x271/0x290
__might_fault+0x28/0x80
kvm_vcpu_read_guest_page+0x8d/0xc0 [kvm]
kvm_fetch_guest_virt+0x92/0xc0 [kvm]
__do_insn_fetch_bytes+0xf3/0x1e0 [kvm]
x86_decode_insn+0xd1/0x1010 [kvm]
x86_emulate_instruction+0x105/0x810 [kvm]
__svm_skip_emulated_instruction+0xc4/0x140 [kvm_amd]
handle_fastpath_invd+0xc4/0x1a0 [kvm]
vcpu_run+0x11a1/0x1db0 [kvm]
kvm_arch_vcpu_ioctl_run+0x5cc/0x730 [kvm]
kvm_vcpu_ioctl+0x578/0x6a0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x8a/0x2c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f479d57a94b
</TASK>
Note, this is essentially a reapply of commit 5c30e8101e8d ("KVM: SVM:
Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"), but with
different justification (KVM now grabs SRCU when skipping the instruction
for other reasons).
Fixes: b439eb8ab578 ("Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250805190526.1453366-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
[ adapted switch-based MSR/HLT fastpath to if-based MSR-only check ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nathan Chancellor <nathan@kernel.org>
Date: Mon Jun 9 15:45:20 2025 -0700
lib/crypto/curve25519-hacl64: Disable KASAN with clang-17 and older
commit 2f13daee2a72bb962f5fd356c3a263a6f16da965 upstream.
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with clang-17 and older show an instance of
-Wframe-larger-than (which breaks the build with CONFIG_WERROR=y):
lib/crypto/curve25519-hacl64.c:757:6: error: stack frame size (2336) exceeds limit (2048) in 'curve25519_generic' [-Werror,-Wframe-larger-than]
757 | void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE],
| ^
When KASAN is disabled, the stack usage is roughly quartered:
lib/crypto/curve25519-hacl64.c:757:6: error: stack frame size (608) exceeds limit (128) in 'curve25519_generic' [-Werror,-Wframe-larger-than]
757 | void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE],
| ^
Using '-Rpass-analysis=stack-frame-layout' shows the following variables
and many, many 8-byte spills when KASAN is enabled:
Offset: [SP-144], Type: Variable, Align: 8, Size: 40
Offset: [SP-464], Type: Variable, Align: 8, Size: 320
Offset: [SP-784], Type: Variable, Align: 8, Size: 320
Offset: [SP-864], Type: Variable, Align: 32, Size: 80
Offset: [SP-896], Type: Variable, Align: 32, Size: 32
Offset: [SP-1016], Type: Variable, Align: 8, Size: 120
When KASAN is disabled, there are still spills but not at many and the
variables list is smaller:
Offset: [SP-192], Type: Variable, Align: 32, Size: 80
Offset: [SP-224], Type: Variable, Align: 32, Size: 32
Offset: [SP-344], Type: Variable, Align: 8, Size: 120
Disable KASAN for this file when using clang-17 or older to avoid
blowing out the stack, clearing up the warning.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250609-curve25519-hacl64-disable-kasan-clang-v1-1-08ea0ac5ccff@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Johan Hovold <johan@kernel.org>
Date: Wed Sep 24 10:02:07 2025 +0200
lib/genalloc: fix device leak in of_gen_pool_get()
commit 1260cbcffa608219fc9188a6cbe9c45a300ef8b5 upstream.
Make sure to drop the reference taken when looking up the genpool platform
device in of_gen_pool_get() before returning the pool.
Note that holding a reference to a device does typically not prevent its
devres managed resources from being released so there is no point in
keeping the reference.
Link: https://lkml.kernel.org/r/20250924080207.18006-1-johan@kernel.org
Fixes: 9375db07adea ("genalloc: add devres support, allow to find a managed pool by device")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: <stable@vger.kernel.org> [3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ian Rogers <irogers@google.com>
Date: Thu Aug 21 09:38:19 2025 -0700
libperf event: Ensure tracing data is multiple of 8 sized
[ Upstream commit b39c915a4f365cce6bdc0e538ed95d31823aea8f ]
Perf's synthetic-events.c will ensure 8-byte alignment of tracing
data, writing it after a perf_record_header_tracing_data event.
Add padding to struct perf_record_header_tracing_data to make it 16-byte
rather than 12-byte sized.
Fixes: 055c67ed39887c55 ("perf tools: Move event synthesizing routines to separate .c file")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250821163820.1132977-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Sun Oct 19 16:31:02 2025 +0200
Linux 6.6.113
Link: https://lore.kernel.org/r/20251017145134.710337454@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Hardik Garg <hargar@linux.microsoft.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Huacai Chen <chenhuacai@kernel.org>
Date: Thu Oct 2 22:38:57 2025 +0800
LoongArch: Init acpi_gbl_use_global_lock to false
[ Upstream commit 98662be7ef20d2b88b598f72e7ce9b6ac26a40f9 ]
Init acpi_gbl_use_global_lock to false, in order to void error messages
during boot phase:
ACPI Error: Could not enable GlobalLock event (20240827/evxfevnt-182)
ACPI Error: No response from Global Lock hardware, disabling lock (20240827/evglock-59)
Fixes: 628c3bb40e9a8cefc0a6 ("LoongArch: Add boot and setup routines")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tiezhu Yang <yangtiezhu@loongson.cn>
Date: Mon Jun 3 15:45:53 2024 +0800
LoongArch: Remove CONFIG_ACPI_TABLE_UPGRADE in platform_init()
[ Upstream commit 6c3ca6654a74dd396bc477839ba8d9792eced441 ]
Both acpi_table_upgrade() and acpi_boot_table_init() are defined as
empty functions under !CONFIG_ACPI_TABLE_UPGRADE and !CONFIG_ACPI in
include/linux/acpi.h, there are no implicit declaration errors with
various configs.
#ifdef CONFIG_ACPI_TABLE_UPGRADE
void acpi_table_upgrade(void);
#else
static inline void acpi_table_upgrade(void) { }
#endif
#ifdef CONFIG_ACPI
...
void acpi_boot_table_init (void);
...
#else /* !CONFIG_ACPI */
...
static inline void acpi_boot_table_init(void)
{
}
...
#endif /* !CONFIG_ACPI */
As Huacai suggested, CONFIG_ACPI_TABLE_UPGRADE is ugly and not necessary
here, just remove it. At the same time, just keep CONFIG_ACPI to prevent
potential build errors in future, and give a signal to indicate the code
is ACPI-specific. For the same reason, we also put acpi_table_upgrade()
under CONFIG_ACPI.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Stable-dep-of: 98662be7ef20 ("LoongArch: Init acpi_gbl_use_global_lock to false")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Harini T <harini.t@amd.com>
Date: Mon Sep 29 13:07:21 2025 +0530
mailbox: zynqmp-ipi: Remove dev.parent check in zynqmp_ipi_free_mboxes
[ Upstream commit 019e3f4550fc7d319a7fd03eff487255f8e8aecd ]
The ipi_mbox->dev.parent check is unreliable proxy for registration
status as it fails to protect against probe failures that occur after
the parent is assigned but before device_register() completes.
device_is_registered() is the canonical and robust method to verify the
registration status.
Remove ipi_mbox->dev.parent check in zynqmp_ipi_free_mboxes().
Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Harini T <harini.t@amd.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Harini T <harini.t@amd.com>
Date: Mon Sep 29 13:07:20 2025 +0530
mailbox: zynqmp-ipi: Remove redundant mbox_controller_unregister() call
[ Upstream commit 341867f730d3d3bb54491ee64e8b1a0c446656e7 ]
The controller is registered using the device-managed function
'devm_mbox_controller_register()'. As documented in mailbox.c, this
ensures the devres framework automatically calls
mbox_controller_unregister() when device_unregister() is invoked, making
the explicit call unnecessary.
Remove redundant mbox_controller_unregister() call as
device_unregister() handles controller cleanup.
Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Harini T <harini.t@amd.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Fourier <fourier.thomas@gmail.com>
Date: Wed Jul 9 13:35:40 2025 +0200
media: cx18: Add missing check after DMA map
commit 23b53639a793477326fd57ed103823a8ab63084f upstream.
The DMA map functions can fail and should be tested for errors.
If the mapping fails, dealloc buffers, and return.
Fixes: 1c1e45d17b66 ("V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qianfeng Rong <rongqianfeng@vivo.com>
Date: Wed Aug 27 20:39:10 2025 +0800
media: i2c: mt9v111: fix incorrect type for ret
commit bacd713145443dce7764bb2967d30832a95e5ec8 upstream.
Change "ret" from unsigned int to int type in mt9v111_calc_frame_rate()
to store negative error codes or zero returned by __mt9v111_hw_reset()
and other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Fixes: aab7ed1c3927 ("media: i2c: Add driver for Aptina MT9V111")
Cc: stable@vger.kernel.org
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Fri Jul 18 17:50:54 2025 +0800
media: lirc: Fix error handling in lirc_register()
commit 4f4098c57e139ad972154077fb45c3e3141555dd upstream.
When cdev_device_add() failed, calling put_device() to explicitly
release dev->lirc_dev. Otherwise, it could cause the fault of the
reference count.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: a6ddd4fecbb0 ("media: lirc: remove last remnants of lirc kapi")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Edward Adam Davis <eadavis@qq.com>
Date: Mon Oct 13 17:44:57 2025 -0400
media: mc: Clear minor number before put device
[ Upstream commit 8cfc8cec1b4da88a47c243a11f384baefd092a50 ]
The device minor should not be cleared after the device is released.
Fixes: 9e14868dc952 ("media: mc: Clear minor number reservation at unregistration time")
Cc: stable@vger.kernel.org
Reported-by: syzbot+031d0cfd7c362817963f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=031d0cfd7c362817963f
Tested-by: syzbot+031d0cfd7c362817963f@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ moved clear_bit from media_devnode_release callback to media_devnode_unregister before put_device ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Wed Aug 20 17:00:20 2025 +0300
media: mc: Fix MUST_CONNECT handling for pads with no links
commit eec81250219a209b863f11d02128ec1dd8e20877 upstream.
Commit b3decc5ce7d7 ("media: mc: Expand MUST_CONNECT flag to always
require an enabled link") expanded the meaning of the MUST_CONNECT flag
to require an enabled link in all cases. To do so, the link exploration
code was expanded to cover unconnected pads, in order to reject those
that have the MUST_CONNECT flag set. The implementation was however
incorrect, ignoring unconnected pads instead of ignoring connected pads.
Fix it.
Reported-by: Martin Kepplinger-Novaković <martink@posteo.de>
Closes: https://lore.kernel.org/linux-media/20250205172957.182362-1-martink@posteo.de
Reported-by: Maud Spierings <maudspierings@gocontroll.com>
Closes: https://lore.kernel.org/linux-media/20250818-imx8_isi-v1-1-e9cfe994c435@gocontroll.com
Fixes: b3decc5ce7d7 ("media: mc: Expand MUST_CONNECT flag to always require an enabled link")
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Maud Spierings <maudspierings@gocontroll.com>
Tested-by: Martin Kepplinger-Novaković <martink@posteo.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Fourier <fourier.thomas@gmail.com>
Date: Wed Jul 16 15:26:30 2025 +0200
media: pci: ivtv: Add missing check after DMA map
commit 1069a4fe637d0e3e4c163e3f8df9be306cc299b4 upstream.
The DMA map functions can fail and should be tested for errors.
If the mapping fails, free blanking_ptr and set it to 0. As 0 is a
valid DMA address, use blanking_ptr to test if the DMA address
is set.
Fixes: 1a0adaf37c30 ("V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Date: Fri Aug 8 11:59:15 2025 +0300
media: v4l2-subdev: Fix alloc failure check in v4l2_subdev_call_state_try()
commit f37df9a0eb5e43fcfe02cbaef076123dc0d79c7e upstream.
v4l2_subdev_call_state_try() macro allocates a subdev state with
__v4l2_subdev_state_alloc(), but does not check the returned value. If
__v4l2_subdev_state_alloc fails, it returns an ERR_PTR, and that would
cause v4l2_subdev_call_state_try() to crash.
Add proper error handling to v4l2_subdev_call_state_try().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: 982c0487185b ("media: subdev: Add v4l2_subdev_call_state_try() macro")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aJTNtpDUbTz7eyJc%40stanley.mountain/
Cc: stable@vger.kernel.org
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Stephan Gerhold <stephan.gerhold@linaro.org>
Date: Wed Aug 20 17:16:39 2025 +0200
media: venus: firmware: Use correct reset sequence for IRIS2
commit 93f213b444a40f1e7a4383b499b65e782dcb14b9 upstream.
When starting venus with the "no_tz" code path, IRIS2 needs the same
boot/reset sequence as IRIS2_1. This is because most of the registers were
moved to the "wrapper_tz_base", which is already defined for both IRIS2 and
IRIS2_1 inside core.c. Add IRIS2 to the checks inside firmware.c as well to
make sure that it uses the correct reset sequence.
Both IRIS2 and IRIS2_1 are HFI v6 variants, so the correct sequence was
used before commit c38610f8981e ("media: venus: firmware: Sanitize
per-VPU-version").
Fixes: c38610f8981e ("media: venus: firmware: Sanitize per-VPU-version")
Cc: stable@vger.kernel.org
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: Fixed commit log IRIS -> IRIS2]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhen Ni <zhen.ni@easystack.cn>
Date: Wed Aug 6 10:55:38 2025 +0800
memory: samsung: exynos-srom: Fix of_iomap leak in exynos_srom_probe
commit 6744085079e785dae5f7a2239456135407c58b25 upstream.
The of_platform_populate() call at the end of the function has a
possible failure path, causing a resource leak.
Replace of_iomap() with devm_platform_ioremap_resource() to ensure
automatic cleanup of srom->reg_base.
This issue was detected by smatch static analysis:
drivers/memory/samsung/exynos-srom.c:155 exynos_srom_probe()warn:
'srom->reg_base' from of_iomap() not released on lines: 155.
Fixes: 8ac2266d8831 ("memory: samsung: exynos-srom: Add support for bank configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://lore.kernel.org/r/20250806025538.306593-1-zhen.ni@easystack.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Mon Oct 13 18:48:11 2025 -0400
mfd: intel_soc_pmic_chtdc_ti: Drop unneeded assignment for cache_type
[ Upstream commit 9eb99c08508714906db078b5efbe075329a3fb06 ]
REGCACHE_NONE is the default type of the cache when not provided.
Drop unneeded explicit assignment to it.
Note, it's defined to 0, and if ever be redefined, it will break
literally a lot of the drivers, so it very unlikely to happen.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250129152823.1802273-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 64e0d839c589 ("mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hans de Goede <hansg@kernel.org>
Date: Mon Oct 13 18:48:10 2025 -0400
mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
[ Upstream commit 70e997e0107e5ed85c1a3ef2adfccbe351c29d71 ]
The max_register = 128 setting in the regmap config is not valid.
The Intel Dollar Cove TI PMIC has an eeprom unlock register at address 0x88
and a number of EEPROM registers at 0xF?. Increase max_register to 0xff so
that these registers can be accessed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241208150028.325349-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 64e0d839c589 ("mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hans de Goede <hansg@kernel.org>
Date: Mon Oct 13 18:48:12 2025 -0400
mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag
[ Upstream commit 64e0d839c589f4f2ecd2e3e5bdb5cee6ba6bade9 ]
Testing has shown that reading multiple registers at once (for 10-bit
ADC values) does not work. Set the use_single_read regmap_config flag
to make regmap split these for us.
This should fix temperature opregion accesses done by
drivers/acpi/pmic/intel_pmic_chtdc_ti.c and is also necessary for
the upcoming drivers for the ADC and battery MFD cells.
Fixes: 6bac0606fdba ("mfd: Add support for Cherry Trail Dollar Cove TI PMIC")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250804133240.312383-1-hansg@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Wed Aug 13 00:17:44 2025 +0900
minixfs: Verify inode mode when loading from disk
[ Upstream commit 73861970938ad1323eb02bbbc87f6fbd1e5bacca ]
The inode mode loaded from corrupted disk can be invalid. Do like what
commit 0a9e74051313 ("isofs: Verify inode mode when loading from disk")
does.
Reported-by: syzbot <syzbot+895c23f6917da440ed0d@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=895c23f6917da440ed0d
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/ec982681-84b8-4624-94fa-8af15b77cbd2@I-love.SAKURA.ne.jp
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ekansh Gupta <quic_ekangupt@quicinc.com>
Date: Tue Oct 14 11:12:25 2025 -0400
misc: fastrpc: Add missing dev_err newlines
[ Upstream commit a150c68ae6369ea65b786fefd0b8aa0b075c041a ]
Few dev_err calls are missing newlines. This can result in unrelated
lines getting appended which might make logs difficult to understand.
Add trailing newlines to avoid this.
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 8b5b456222fd ("misc: fastrpc: Save actual DMA size in fastrpc_map structure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ling Xu <quic_lxu5@quicinc.com>
Date: Tue Oct 14 11:12:26 2025 -0400
misc: fastrpc: Save actual DMA size in fastrpc_map structure
[ Upstream commit 8b5b456222fd604079b5cf2af1f25ad690f54a25 ]
For user passed fd buffer, map is created using DMA calls. The
map related information is stored in fastrpc_map structure. The
actual DMA size is not stored in the structure. Store the actual
size of buffer and check it against the user passed size.
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable@kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Co-developed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131236.303102-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: SeongJae Park <sj@kernel.org>
Date: Mon Sep 29 17:44:09 2025 -0700
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
commit b93af2cc8e036754c0d9970d9ddc47f43cc94b9f upstream.
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem.
Link: https://lkml.kernel.org/r/20250930004410.55228-1-sj@kernel.org
Fixes: 7780d04046a2 ("mm/pagewalkers: ACTION_AGAIN if pte_offset_map_lock() fails")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Xinyu Zheng <zhengxinyu6@huawei.com>
Closes: https://lore.kernel.org/20250918030029.2652607-1-zhengxinyu6@huawei.com
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Li RongQing <lirongqing@baidu.com>
Date: Thu Aug 14 18:23:33 2025 +0800
mm/hugetlb: early exit from hugetlb_pages_alloc_boot() when max_huge_pages=0
commit b322e88b3d553e85b4e15779491c70022783faa4 upstream.
Optimize hugetlb_pages_alloc_boot() to return immediately when
max_huge_pages is 0, avoiding unnecessary CPU cycles and the below log
message when hugepages aren't configured in the kernel command line.
[ 3.702280] HugeTLB: allocation took 0ms with hugepage_allocation_threads=32
Link: https://lkml.kernel.org/r/20250814102333.4428-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Tested-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Donet Tom <donettom@linux.ibm.com>
Date: Tue Oct 14 10:01:32 2025 -0400
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
[ Upstream commit 4d6fc29f36341d7795db1d1819b4c15fe9be7b23 ]
Patch series "mm/ksm: Fix incorrect accounting of KSM counters during
fork", v3.
The first patch in this series fixes the incorrect accounting of KSM
counters such as ksm_merging_pages, ksm_rmap_items, and the global
ksm_zero_pages during fork.
The following patch add a selftest to verify the ksm_merging_pages counter
was updated correctly during fork.
Test Results
============
Without the first patch
-----------------------
# [RUN] test_fork_ksm_merging_page_count
not ok 10 ksm_merging_page in child: 32
With the first patch
--------------------
# [RUN] test_fork_ksm_merging_page_count
ok 10 ksm_merging_pages is not inherited after fork
This patch (of 2):
Currently, the KSM-related counters in `mm_struct`, such as
`ksm_merging_pages`, `ksm_rmap_items`, and `ksm_zero_pages`, are inherited
by the child process during fork. This results in inconsistent
accounting.
When a process uses KSM, identical pages are merged and an rmap item is
created for each merged page. The `ksm_merging_pages` and
`ksm_rmap_items` counters are updated accordingly. However, after a fork,
these counters are copied to the child while the corresponding rmap items
are not. As a result, when the child later triggers an unmerge, there are
no rmap items present in the child, so the counters remain stale, leading
to incorrect accounting.
A similar issue exists with `ksm_zero_pages`, which maintains both a
global counter and a per-process counter. During fork, the per-process
counter is inherited by the child, but the global counter is not
incremented. Since the child also references zero pages, the global
counter should be updated as well. Otherwise, during zero-page unmerge,
both the global and per-process counters are decremented, causing the
global counter to become inconsistent.
To fix this, ksm_merging_pages and ksm_rmap_items are reset to 0 during
fork, and the global ksm_zero_pages counter is updated with the
per-process ksm_zero_pages value inherited by the child. This ensures
that KSM statistics remain accurate and reflect the activity of each
process correctly.
Link: https://lkml.kernel.org/r/cover.1758648700.git.donettom@linux.ibm.com
Link: https://lkml.kernel.org/r/7b9870eb67ccc0d79593940d9dbd4a0b39b5d396.1758648700.git.donettom@linux.ibm.com
Fixes: 7609385337a4 ("ksm: count ksm merging pages for each process")
Fixes: cb4df4cae4f2 ("ksm: count allocated ksm rmap_items for each process")
Fixes: e2942062e01d ("ksm: count all zero pages placed by KSM")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ changed mm_flags_test() to test_bit() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Date: Thu Aug 14 14:22:45 2025 -0300
mm/page_alloc: only set ALLOC_HIGHATOMIC for __GPF_HIGH allocations
commit 6a204d4b14c99232e05d35305c27ebce1c009840 upstream.
Commit 524c48072e56 ("mm/page_alloc: rename ALLOC_HIGH to
ALLOC_MIN_RESERVE") is the start of a series that explains how __GFP_HIGH,
which implies ALLOC_MIN_RESERVE, is going to be used instead of
__GFP_ATOMIC for high atomic reserves.
Commit eb2e2b425c69 ("mm/page_alloc: explicitly record high-order atomic
allocations in alloc_flags") introduced ALLOC_HIGHATOMIC for such
allocations of order higher than 0. It still used __GFP_ATOMIC, though.
Then, commit 1ebbb21811b7 ("mm/page_alloc: explicitly define how
__GFP_HIGH non-blocking allocations accesses reserves") just turned that
check for !__GFP_DIRECT_RECLAIM, ignoring that high atomic reserves were
expected to test for __GFP_HIGH.
This leads to high atomic reserves being added for high-order GFP_NOWAIT
allocations and others that clear __GFP_DIRECT_RECLAIM, which is
unexpected. Later, those reserves lead to 0-order allocations going to
the slow path and starting reclaim.
From /proc/pagetypeinfo, without the patch:
Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA32, type HighAtomic 1 8 10 9 7 3 0 0 0 0 0
Node 0, zone Normal, type HighAtomic 64 20 12 5 0 0 0 0 0 0 0
With the patch:
Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Link: https://lkml.kernel.org/r/20250814172245.1259625-1-cascardo@igalia.com
Fixes: 1ebbb21811b7 ("mm/page_alloc: explicitly define how __GFP_HIGH non-blocking allocations accesses reserves")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Tested-by: Helen Koike <koike@igalia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rex Chen <rex.chen_1@nxp.com>
Date: Mon Jul 28 17:22:29 2025 +0900
mmc: core: SPI mode remove cmd7
commit fec40f44afdabcbc4a7748e4278f30737b54bb1a upstream.
SPI mode doesn't support cmd7, so remove it in mmc_sdio_alive() and
confirm if sdio is active by checking CCCR register value is available
or not.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250728082230.1037917-2-rex.chen_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Thu Sep 25 12:32:36 2025 +0200
mptcp: pm: in-kernel: usable client side with C-flag
commit 4b1ff850e0c1aacc23e923ed22989b827b9808f9 upstream.
When servers set the C-flag in their MP_CAPABLE to tell clients not to
create subflows to the initial address and port, clients will likely not
use their other endpoints. That's because the in-kernel path-manager
uses the 'subflow' endpoints to create subflows only to the initial
address and port.
If the limits have not been modified to accept ADD_ADDR, the client
doesn't try to establish new subflows. If the limits accept ADD_ADDR,
the routing routes will be used to select the source IP.
The C-flag is typically set when the server is operating behind a legacy
Layer 4 load balancer, or using anycast IP address. Clients having their
different 'subflow' endpoints setup, don't end up creating multiple
subflows as expected, and causing some deployment issues.
A special case is then added here: when servers set the C-flag in the
MPC and directly sends an ADD_ADDR, this single ADD_ADDR is accepted.
The 'subflows' endpoints will then be used with this new remote IP and
port. This exception is only allowed when the ADD_ADDR is sent
immediately after the 3WHS, and makes the client switching to the 'fully
established' mode. After that, 'select_local_address()' will not be able
to find any subflows, because 'id_avail_bitmap' will be filled in
mptcp_pm_create_subflow_or_signal_addr(), when switching to 'fully
established' mode.
Fixes: df377be38725 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/536
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-1-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in pm.c, because commit 498d7d8b75f1 ("mptcp: pm: remove
'_nl' from mptcp_pm_nl_is_init_remote_addr") renamed an helper in the
context, and it is not in this version. The same new code can be
applied at the same place.
Conflict in pm_kernel.c, because the modified code has been moved from
pm_netlink.c to pm_kernel.c in commit 8617e85e04bd ("mptcp: pm: split
in-kernel PM specific code"), which is not in this version. The
resolution is easy: simply by applying the patch where 'pm_kernel.c'
has been replaced 'pm_netlink.c'.
Conflict in pm_netlink.c, because commit b83fbca1b4c9 ("mptcp: pm:
reduce entries iterations on connect") is not in this version. Instead
of using the 'locals' variable (struct mptcp_pm_local *) from the new
version and embedding a "struct mptcp_addr_info", we can simply
continue to use the 'addrs' variable (struct mptcp_addr_info *).
Conflict in protocol.h, because commit af3dc0ad3167 ("mptcp: Remove
unused declaration mptcp_sockopt_sync()") is not in this version and
it removed one line in the context. The resolution is easy because the
new function can still be added at the same place. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Tue Sep 16 18:07:37 2025 +0200
mtd: rawnand: fsmc: Default to autodetect buswidth
commit b8df622cf7f6808c85764e681847150ed6d85f3d upstream.
If you don't specify buswidth 2 (16 bits) in the device
tree, FSMC doesn't even probe anymore:
fsmc-nand 10100000.flash: FSMC device partno 090,
manufacturer 80, revision 00, config 00
nand: device found, Manufacturer ID: 0x20, Chip ID: 0xb1
nand: ST Micro 10100000.flash
nand: bus width 8 instead of 16 bits
nand: No NAND device found
fsmc-nand 10100000.flash: probe with driver fsmc-nand failed
with error -22
With this patch to use autodetection unless buswidth is
specified, the device is properly detected again:
fsmc-nand 10100000.flash: FSMC device partno 090,
manufacturer 80, revision 00, config 00
nand: device found, Manufacturer ID: 0x20, Chip ID: 0xb1
nand: ST Micro NAND 128MiB 1,8V 16-bit
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
fsmc-nand 10100000.flash: Using 1-bit HW ECC scheme
Scanning device for bad blocks
I don't know where or how this happened, I think some change
in the nand core.
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Tue Sep 30 15:25:01 2025 +0300
net/mlx4: prevent potential use after free in mlx4_en_do_uc_filter()
[ Upstream commit 4f0d91ba72811fd5dd577bcdccd7fed649aae62c ]
Print "entry->mac" before freeing "entry". The "entry" pointer is
freed with kfree_rcu() so it's unlikely that we would trigger this
in real life, but it's safer to re-order it.
Fixes: cc5387f7346a ("net/mlx4_en: Add unicast MAC filtering")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/aNvMHX4g8RksFFvV@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexandr Sapozhnikov <alsp705@gmail.com>
Date: Thu Oct 2 12:14:47 2025 +0300
net/sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()
[ Upstream commit 2f3119686ef50319490ccaec81a575973da98815 ]
If new_asoc->peer.adaptation_ind=0 and sctp_ulpevent_make_authkey=0
and sctp_ulpevent_make_authkey() returns 0, then the variable
ai_ev remains zero and the zero will be dereferenced
in the sctp_ulpevent_free() function.
Signed-off-by: Alexandr Sapozhnikov <alsp705@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Fixes: 30f6ebf65bc4 ("sctp: add SCTP_AUTH_NO_AUTH type for AUTHENTICATION_EVENT")
Link: https://patch.msgid.link/20251002091448.11-1-alsp705@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Erick Karanja <karanja99erick@gmail.com>
Date: Thu Oct 2 20:46:17 2025 +0300
net: fsl_pq_mdio: Fix device node reference leak in fsl_pq_mdio_probe
[ Upstream commit 521405cb54cd2812bbb6dedd5afc14bca1e7e98a ]
Add missing of_node_put call to release device node tbi obtained
via for_each_child_of_node.
Fixes: afae5ad78b342 ("net/fsl_pq_mdio: streamline probing of MDIO nodes")
Signed-off-by: Erick Karanja <karanja99erick@gmail.com>
Link: https://patch.msgid.link/20251002174617.960521-1-karanja99erick@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Wed Aug 28 11:34:02 2024 +0200
netfilter: nf_tables: drop unused 3rd argument from validate callback ops
[ Upstream commit eaf9b2c875ece22768b78aa38da8b232e5de021b ]
Since commit a654de8fdc18 ("netfilter: nf_tables: fix chain dependency validation")
the validate() callback no longer needs the return pointer argument.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: f359b809d54c ("netfilter: nft_objref: validate objref and objrefmap expressions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fernando Fernandez Mancera <fmancera@suse.de>
Date: Wed Oct 8 12:08:16 2025 +0200
netfilter: nft_objref: validate objref and objrefmap expressions
[ Upstream commit f359b809d54c6e3dd1d039b97e0b68390b0e53e4 ]
Referencing a synproxy stateful object from OUTPUT hook causes kernel
crash due to infinite recursive calls:
BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12)
[...]
Call Trace:
__find_rr_leaf+0x99/0x230
fib6_table_lookup+0x13b/0x2d0
ip6_pol_route+0xa4/0x400
fib6_rule_lookup+0x156/0x240
ip6_route_output_flags+0xc6/0x150
__nf_ip6_route+0x23/0x50
synproxy_send_tcp_ipv6+0x106/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
nft_synproxy_do_eval+0x263/0x310
nft_do_chain+0x5a8/0x5f0 [nf_tables
nft_do_chain_inet+0x98/0x110
nf_hook_slow+0x43/0xc0
__ip6_local_out+0xf0/0x170
ip6_local_out+0x17/0x70
synproxy_send_tcp_ipv6+0x1a2/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
[...]
Implement objref and objrefmap expression validate functions.
Currently, only NFT_OBJECT_SYNPROXY object type requires validation.
This will also handle a jump to a chain using a synproxy object from the
OUTPUT hook.
Now when trying to reference a synproxy object in the OUTPUT hook, nft
will produce the following error:
synproxy_crash.nft: Error: Could not process rule: Operation not supported
synproxy name mysynproxy
^^^^^^^^^^^^^^^^^^^^^^^^
Fixes: ee394f96ad75 ("netfilter: nft_synproxy: add synproxy stateful object support")
Reported-by: Georg Pfuetzenreuter <georg.pfuetzenreuter@suse.com>
Closes: https://bugzilla.suse.com/1250237
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thorsten Blum <thorsten.blum@linux.dev>
Date: Wed Aug 6 03:10:01 2025 +0200
NFSD: Fix destination buffer size in nfsd4_ssc_setup_dul()
commit ab1c282c010c4f327bd7addc3c0035fd8e3c1721 upstream.
Commit 5304877936c0 ("NFSD: Fix strncpy() fortify warning") replaced
strncpy(,, sizeof(..)) with strlcpy(,, sizeof(..) - 1), but strlcpy()
already guaranteed NUL-termination of the destination buffer and
subtracting one byte potentially truncated the source string.
The incorrect size was then carried over in commit 72f78ae00a8e ("NFSD:
move from strlcpy with unused retval to strscpy") when switching from
strlcpy() to strscpy().
Fix this off-by-one error by using the full size of the destination
buffer again.
Cc: stable@vger.kernel.org
Fixes: 5304877936c0 ("NFSD: Fix strncpy() fortify warning")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Olga Kornievskaia <okorniev@redhat.com>
Date: Thu Aug 21 16:31:46 2025 -0400
nfsd: nfserr_jukebox in nlm_fopen should lead to a retry
commit a082e4b4d08a4a0e656d90c2c05da85f23e6d0c9 upstream.
When v3 NLM request finds a conflicting delegation, it triggers
a delegation recall and nfsd_open fails with EAGAIN. nfsd_open
then translates EAGAIN into nfserr_jukebox. In nlm_fopen, instead
of returning nlm_failed for when there is a conflicting delegation,
drop this NLM request so that the client retries. Once delegation
is recalled and if a local lock is claimed, a retry would lead to
nfsd returning a nlm_lck_blocked error or a successful nlm lock.
Fixes: d343fce148a4 ("[PATCH] knfsd: Allow lockd to drop replies as appropriate")
Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Georg Gottleuber <ggo@tuxedocomputers.com>
Date: Tue Jul 1 22:55:49 2025 +0200
nvme-pci: Add TUXEDO IBS Gen8 to Samsung sleep quirk
commit eeaed48980a7aeb0d3d8b438185d4b5a66154ff9 upstream.
On the TUXEDO InfinityBook S Gen8, a Samsung 990 Evo NVMe leads to
a high power consumption in s2idle sleep (3.5 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a sleep with
a lower power consumption, typically around 1 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Tue Sep 30 16:16:18 2025 +0800
of: unittest: Fix device reference count leak in of_unittest_pci_node_verify
commit a8de554774ae48efbe48ace79f8badae2daa2bf1 upstream.
In of_unittest_pci_node_verify(), when the add parameter is false,
device_find_any_child() obtains a reference to a child device. This
function implicitly calls get_device() to increment the device's
reference count before returning the pointer. However, the caller
fails to properly release this reference by calling put_device(),
leading to a device reference count leak. Add put_device() in the else
branch immediately after child_dev is no longer needed.
As the comment of device_find_any_child states: "NOTE: you will need
to drop the reference with put_device() after use".
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 26409dd04589 ("of: unittest: Add pci_dt_testdrv pci driver")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Askar Safin <safinaskar@zohomail.com>
Date: Mon Aug 25 18:12:33 2025 +0000
openat2: don't trigger automounts with RESOLVE_NO_XDEV
commit 042a60680de43175eb4df0977ff04a4eba9da082 upstream.
openat2 had a bug: if we pass RESOLVE_NO_XDEV, then openat2
doesn't traverse through automounts, but may still trigger them.
(See the link for full bug report with reproducer.)
This commit fixes this bug.
Link: https://lore.kernel.org/linux-fsdevel/20250817075252.4137628-1-safinaskar@zohomail.com/
Fixes: fddb5d430ad9fa91b49b1 ("open: introduce openat2(2) syscall")
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Cc: stable@vger.kernel.org
Signed-off-by: Askar Safin <safinaskar@zohomail.com>
Link: https://lore.kernel.org/20250825181233.2464822-5-safinaskar@zohomail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sam James <sam@gentoo.org>
Date: Wed Oct 1 23:58:40 2025 +0100
parisc: don't reference obsolete termio struct for TC* constants
commit 8ec5a066f88f89bd52094ba18792b34c49dcd55a upstream.
Similar in nature to ab107276607af90b13a5994997e19b7b9731e251. glibc-2.42
drops the legacy termio struct, but the ioctls.h header still defines some
TC* constants in terms of termio (via sizeof). Hardcode the values instead.
This fixes building Python for example, which falls over like:
./Modules/termios.c:1119:16: error: invalid application of 'sizeof' to incomplete type 'struct termio'
Link: https://bugs.gentoo.org/961769
Link: https://bugs.gentoo.org/962600
Co-authored-by: Stian Halseth <stian@itx.no>
Cc: stable@vger.kernel.org
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: John David Anglin <dave.anglin@bell.net>
Date: Tue Aug 5 11:35:30 2025 -0400
parisc: Remove spurious if statement from raw_copy_from_user()
commit 16794e524d310780163fdd49d0bf7fac30f8dbc8 upstream.
Accidently introduced in commit 91428ca9320e.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 91428ca9320e ("parisc: Check region is readable by user in raw_copy_from_user()")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Niklas Schnelle <schnelle@linux.ibm.com>
Date: Thu Aug 7 15:55:38 2025 +0200
PCI/AER: Fix missing uevent on recovery when a reset is requested
commit bbf7d0468d0da71d76cc6ec9bc8a224325d07b6b upstream.
Since commit 7b42d97e99d3 ("PCI/ERR: Always report current recovery
status for udev") AER uses the result of error_detected() as parameter
to pci_uevent_ers(). As pci_uevent_ers() however does not handle
PCI_ERS_RESULT_NEED_RESET this results in a missing uevent for the
beginning of recovery if drivers request a reset. Fix this by treating
PCI_ERS_RESULT_NEED_RESET as beginning recovery.
Fixes: 7b42d97e99d3 ("PCI/ERR: Always report current recovery status for udev")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250807-add_err_uevents-v5-1-adf85b0620b0@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lukas Wunner <lukas@wunner.de>
Date: Wed Aug 27 15:41:09 2025 +0200
PCI/AER: Support errors introduced by PCIe r6.0
commit 6633875250b38b18b8638cf01e695de031c71f02 upstream.
PCIe r6.0 defined five additional errors in the Uncorrectable Error
Status, Mask and Severity Registers (PCIe r7.0 sec 7.8.4.2ff).
lspci has been supporting them since commit 144b0911cc0b ("ls-ecaps:
extend decode support for more fields for AER CE and UE status"):
https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git/commit/?id=144b0911cc0b
Amend the AER driver to recognize them as well, instead of logging them as
"Unknown Error Bit".
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/21f1875b18d4078c99353378f37dcd6b994f6d4e.1756301211.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lukas Wunner <lukas@wunner.de>
Date: Wed Aug 13 07:11:02 2025 +0200
PCI/ERR: Fix uevent on failure to recover
commit 1cbc5e25fb70e942a7a735a1f3d6dd391afc9b29 upstream.
Upon failure to recover from a PCIe error through AER, DPC or EDR, a
uevent is sent to inform user space about disconnection of the bridge
whose subordinate devices failed to recover.
However the bridge itself is not disconnected. Instead, a uevent should
be sent for each of the subordinate devices.
Only if the "bridge" happens to be a Root Complex Event Collector or
Integrated Endpoint does it make sense to send a uevent for it (because
there are no subordinate devices).
Right now if there is a mix of subordinate devices with and without
pci_error_handlers, a BEGIN_RECOVERY event is sent for those with
pci_error_handlers but no FAILED_RECOVERY event is ever sent for them
afterwards. Fix it.
Fixes: 856e1eb9bdd4 ("PCI/AER: Add uevents in AER and EEH error/resume")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.16+
Link: https://patch.msgid.link/68fc527a380821b5d861dd554d2ce42cb739591c.1755008151.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Niklas Schnelle <schnelle@linux.ibm.com>
Date: Tue Aug 26 10:52:08 2025 +0200
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
commit 05703271c3cdcc0f2a8cf6ebdc45892b8ca83520 upstream.
Before disabling SR-IOV via config space accesses to the parent PF,
sriov_disable() first removes the PCI devices representing the VFs.
Since commit 9d16947b7583 ("PCI: Add global pci_lock_rescan_remove()")
such removal operations are serialized against concurrent remove and
rescan using the pci_rescan_remove_lock. No such locking was ever added
in sriov_disable() however. In particular when commit 18f9e9d150fc
("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device
removal into sriov_del_vfs() there was still no locking around the
pci_iov_remove_virtfn() calls.
On s390 the lack of serialization in sriov_disable() may cause double
remove and list corruption with the below (amended) trace being observed:
PSW: 0704c00180000000 0000000c914e4b38 (klist_put+56)
GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001
00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480
0000000000000001 0000000000000000 0000000000000000 0000000180692828
00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8
#0 [3800313fb20] device_del at c9158ad5c
#1 [3800313fb88] pci_remove_bus_device at c915105ba
#2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198
#3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0
#4 [3800313fc60] zpci_bus_remove_device at c90fb6104
#5 [3800313fca0] __zpci_event_availability at c90fb3dca
#6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2
#7 [3800313fd60] crw_collect_info at c91905822
#8 [3800313fe10] kthread at c90feb390
#9 [3800313fe68] __ret_from_fork at c90f6aa64
#10 [3800313fe98] ret_from_fork at c9194f3f2.
This is because in addition to sriov_disable() removing the VFs, the
platform also generates hot-unplug events for the VFs. This being the
reverse operation to the hotplug events generated by sriov_enable() and
handled via pdev->no_vf_scan. And while the event processing takes
pci_rescan_remove_lock and checks whether the struct pci_dev still exists,
the lack of synchronization makes this checking racy.
Other races may also be possible of course though given that this lack of
locking persisted so long observable races seem very rare. Even on s390 the
list corruption was only observed with certain devices since the platform
events are only triggered by config accesses after the removal, so as long
as the removal finished synchronously they would not race. Either way the
locking is missing so fix this by adding it to the sriov_del_vfs() helper.
Just like PCI rescan-remove, locking is also missing in sriov_add_vfs()
including for the error case where pci_stop_and_remove_bus_device() is
called without the PCI rescan-remove lock being held. Even in the non-error
case, adding new PCI devices and buses should be serialized via the PCI
rescan-remove lock. Add the necessary locking.
Fixes: 18f9e9d150fc ("PCI/IOV: Factor out sriov_add_vfs()")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250826-pci_fix_sriov_disable-v1-1-2d0bc938f2a3@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Brian Norris <briannorris@google.com>
Date: Wed Sep 24 09:57:11 2025 -0700
PCI/sysfs: Ensure devices are powered for config reads
commit 48991e4935078b05f80616c75d1ee2ea3ae18e58 upstream.
The "max_link_width", "current_link_speed", "current_link_width",
"secondary_bus_number", and "subordinate_bus_number" sysfs files all access
config registers, but they don't check the runtime PM state. If the device
is in D3cold or a parent bridge is suspended, we may see -EINVAL, bogus
values, or worse, depending on implementation details.
Wrap these access in pci_config_pm_runtime_{get,put}() like most of the
rest of the similar sysfs attributes.
Notably, "max_link_speed" does not access config registers; it returns a
cached value since d2bd39c0456b ("PCI: Store all PCIe Supported Link
Speeds").
Fixes: 56c1af4606f0 ("PCI: Add sysfs max_link_speed/width, current_link_speed/width, etc")
Signed-off-by: Brian Norris <briannorris@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250924095711.v2.1.Ibb5b6ca1e2c059e04ec53140cd98a44f2684c668@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Date: Tue Oct 14 12:06:18 2025 -0400
PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release
[ Upstream commit 85afa9ea122dd9d4a2ead104a951d318975dcd25 ]
The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be
NULL even after EPF initialization. Then it is prudent to check that
they have non-NULL values before releasing the channels. Add the checks
in pci_epf_test_clean_dma_chan().
Without the checks, NULL pointer dereferences happen and they can lead
to a kernel panic in some cases:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
Call trace:
dma_release_channel+0x2c/0x120 (P)
pci_epf_test_epc_deinit+0x94/0xc0 [pci_epf_test]
pci_epc_deinit_notify+0x74/0xc0
tegra_pcie_ep_pex_rst_irq+0x250/0x5d8
irq_thread_fn+0x34/0xb8
irq_thread+0x18c/0x2e8
kthread+0x14c/0x210
ret_from_fork+0x10/0x20
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Fixes: 5ebf3fc59bd2 ("PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
[mani: trimmed the stack trace]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250916025756.34807-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wang Jiang <jiangwang@kylinos.cn>
Date: Tue Oct 14 12:06:17 2025 -0400
PCI: endpoint: Remove surplus return statement from pci_epf_test_clean_dma_chan()
[ Upstream commit 9b80bdb10aee04ce7289896e6bdad13e33972636 ]
Remove a surplus return statement from the void function that has been
added in the commit commit 8353813c88ef ("PCI: endpoint: Enable DMA
tests for endpoints with DMA capabilities").
Especially, as an empty return statements at the end of a void functions
serve little purpose.
This fixes the following checkpatch.pl script warning:
WARNING: void function return statements are not generally useful
#296: FILE: drivers/pci/endpoint/functions/pci-epf-test.c:296:
+ return;
+}
Link: https://lore.kernel.org/r/tencent_F250BEE2A65745A524E2EFE70CF615CA8F06@qq.com
Signed-off-by: Wang Jiang <jiangwang@kylinos.cn>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Stable-dep-of: 85afa9ea122d ("PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Siddharth Vadapalli <s-vadapalli@ti.com>
Date: Fri Sep 12 15:37:58 2025 +0530
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
commit e51d05f523e43ce5d2bad957943a2b14f68078cd upstream.
Commit under Fixes introduced the IRQ handler for "ks-pcie-error-irq".
The interrupt is acquired using "request_irq()" but is never freed if
the driver exits due to an error. Although the section in the driver that
invokes "request_irq()" has moved around over time, the issue hasn't been
addressed until now.
Fix this by using "devm_request_irq()" which automatically frees the
interrupt if the driver exits.
Fixes: 025dd3daeda7 ("PCI: keystone: Add error IRQ handler")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/r/3d3a4b52-e343-42f3-9d69-94c259812143@kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250912100802.3136121-2-s-vadapalli@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Marek Vasut <marek.vasut+renesas@mailbox.org>
Date: Tue Sep 9 18:26:25 2025 +0200
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
commit 5ed35b4d490d8735021cce9b715b62a418310864 upstream.
The rcar_msi_irq_unmask() function may be called from a PCI driver
request_threaded_irq() function. This triggers kernel/irq/manage.c
__setup_irq() which locks raw spinlock &desc->lock descriptor lock
and with that descriptor lock held, calls rcar_msi_irq_unmask().
Since the &desc->lock descriptor lock is a raw spinlock, and the rcar_msi
.mask_lock is not a raw spinlock, this setup triggers 'BUG: Invalid wait
context' with CONFIG_PROVE_RAW_LOCK_NESTING=y.
Use scoped_guard() to simplify the locking.
Fixes: 83ed8d4fa656 ("PCI: rcar: Convert to MSI domains")
Reported-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Reported-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250909162707.13927-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Marek Vasut <marek.vasut+renesas@mailbox.org>
Date: Tue Sep 9 18:26:24 2025 +0200
PCI: rcar-host: Drop PMSR spinlock
commit 0a8f173d9dad13930d5888505dc4c4fd6a1d4262 upstream.
The pmsr_lock spinlock used to be necessary to synchronize access to the
PMSR register, because that access could have been triggered from either
config space access in rcar_pcie_config_access() or an exception handler
rcar_pcie_aarch32_abort_handler().
The rcar_pcie_aarch32_abort_handler() case is no longer applicable since
commit 6e36203bc14c ("PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read
which triggered an exception"), which performs more accurate, controlled
invocation of the exception, and a fixup.
This leaves rcar_pcie_config_access() as the only call site from which
rcar_pcie_wakeup() is called. The rcar_pcie_config_access() can only be
called from the controller struct pci_ops .read and .write callbacks,
and those are serialized in drivers/pci/access.c using raw spinlock
'pci_lock' . It should be noted that CONFIG_PCI_LOCKLESS_CONFIG is never
set on this platform.
Since the 'pci_lock' is a raw spinlock , and the 'pmsr_lock' is not a
raw spinlock, this constellation triggers 'BUG: Invalid wait context'
with CONFIG_PROVE_RAW_LOCK_NESTING=y .
Remove the pmsr_lock to fix the locking.
Fixes: a115b1bd3af0 ("PCI: rcar: Add L1 link state fix into data abort hook")
Reported-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Reported-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250909162707.13927-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Niklas Cassel <cassel@kernel.org>
Date: Mon Sep 22 16:08:24 2025 +0200
PCI: tegra194: Fix broken tegra_pcie_ep_raise_msi_irq()
commit b640d42a6ac9ba01abe65ec34f7c73aaf6758ab8 upstream.
The pci_epc_raise_irq() supplies a MSI or MSI-X interrupt number in range
(1-N), as per the pci_epc_raise_irq() kdoc, where N is 32 for MSI.
But tegra_pcie_ep_raise_msi_irq() incorrectly uses the interrupt number as
the MSI vector. This causes wrong MSI vector to be triggered, leading to
the failure of PCI endpoint Kselftest MSI_TEST test case.
To fix this issue, convert the interrupt number to MSI vector.
Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250922140822.519796-6-cassel@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vidya Sagar <vidyas@nvidia.com>
Date: Mon Sep 22 16:08:26 2025 +0200
PCI: tegra194: Handle errors in BPMP response
commit f8c9ad46b00453a8c075453f3745f8d263f44834 upstream.
The return value from tegra_bpmp_transfer() indicates the success or
failure of the IPC transaction with BPMP. If the transaction succeeded, we
also need to check the actual command's result code.
If we don't have error handling for tegra_bpmp_transfer(), we will set the
pcie->ep_state to EP_STATE_ENABLED even when the tegra_bpmp_transfer()
command fails. Thus, the pcie->ep_state will get out of sync with reality,
and any further PERST# assert + deassert will be a no-op and will not
trigger the hardware initialization sequence.
This is because pex_ep_event_pex_rst_deassert() checks the current
pcie->ep_state, and does nothing if the current state is already
EP_STATE_ENABLED.
Thus, it is important to have error handling for tegra_bpmp_transfer(),
such that the pcie->ep_state can not get out of sync with reality, so that
we will try to initialize the hardware not only during the first PERST#
assert + deassert, but also during any succeeding PERST# assert + deassert.
One example where this fix is needed is when using a rock5b as host.
During the initial PERST# assert + deassert (triggered by the bootloader on
the rock5b) pex_ep_event_pex_rst_deassert() will get called, but for some
unknown reason, the tegra_bpmp_transfer() call to initialize the PHY fails.
Once Linux has been loaded on the rock5b, the PCIe driver will once again
assert + deassert PERST#. However, without tegra_bpmp_transfer() error
handling, this second PERST# assert + deassert will not trigger the
hardware initialization sequence.
With tegra_bpmp_transfer() error handling, the second PERST# assert +
deassert will once again trigger the hardware to be initialized and this
time the tegra_bpmp_transfer() succeeds.
Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[cassel: improve commit log]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250922140822.519796-8-cassel@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Marek Vasut <marek.vasut+renesas@mailbox.org>
Date: Mon Sep 22 17:07:48 2025 +0200
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
commit 26fda92d3b56bf44a02bcb4001c5a5548e0ae8ee upstream.
The tegra_msi_irq_unmask() function may be called from a PCI driver
request_threaded_irq() function. This triggers kernel/irq/manage.c
__setup_irq() which locks raw spinlock &desc->lock descriptor lock
and with that descriptor lock held, calls tegra_msi_irq_unmask().
Since the &desc->lock descriptor lock is a raw spinlock, and the tegra_msi
.mask_lock is not a raw spinlock, this setup triggers 'BUG: Invalid wait
context' with CONFIG_PROVE_RAW_LOCK_NESTING=y.
Use scoped_guard() to simplify the locking.
Fixes: 2c99e55f7955 ("PCI: tegra: Convert to MSI domains")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://patchwork.kernel.org/project/linux-pci/patch/20250909162707.13927-2-marek.vasut+renesas@mailbox.org/#26574451
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250922150811.88450-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Leo Yan <leo.yan@arm.com>
Date: Thu Oct 3 19:53:17 2024 +0100
perf arm-spe: Rename the common data source encoding
[ Upstream commit 50b8f1d5bf4ad7f09ef8012ccf5f94f741df827b ]
The Neoverse CPUs follow the common data source encoding, and other
CPU variants can share the same format.
Rename the CPU list and data source definitions as common data source
names. This change prepares for appending more CPU variants.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241003185322.192357-3-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: cb300e351505 ("perf arm_spe: Correct memory level for remote access")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Leo Yan <leo.yan@arm.com>
Date: Fri Sep 12 16:42:09 2025 +0100
perf arm_spe: Correct memory level for remote access
[ Upstream commit cb300e3515057fb555983ce47e8acc86a5c69c3c ]
For remote accesses, the data source packet does not contain information
about the memory level. To avoid misinformation, set the memory level to
NA (Not Available).
Fixes: 4e6430cbb1a9f1dc ("perf arm-spe: Use SPE data source for neoverse cores")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Leo Yan <leo.yan@arm.com>
Date: Fri Sep 12 16:42:08 2025 +0100
perf arm_spe: Correct setting remote access
[ Upstream commit 039fd0634a0629132432632d7ac9a14915406b5c ]
Set the mem_remote field for a remote access to appropriately represent
the event.
Fixes: a89dbc9b988f3ba8 ("perf arm-spe: Set sample's data source field")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ian Rogers <irogers@google.com>
Date: Thu Aug 21 09:38:17 2025 -0700
perf evsel: Avoid container_of on a NULL leader
[ Upstream commit 2354479026d726954ff86ce82f4b649637319661 ]
An evsel should typically have a leader of itself, however, in tests
like 'Sample parsing' a NULL leader may occur and the container_of
will return a corrupt pointer.
Avoid this with an explicit NULL test.
Fixes: fba7c86601e2e42d ("libperf: Move 'leader' from tools/perf to perf_evsel::leader")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250821163820.1132977-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ian Rogers <irogers@google.com>
Date: Thu Sep 18 10:24:15 2025 -0700
perf evsel: Ensure the fallback message is always written to
[ Upstream commit 24937ee839e4bbc097acde73eeed67812bad2d99 ]
The fallback message is unconditionally printed in places like
record__open().
If no fallback is attempted this can lead to printing uninitialized
data, crashes, etc.
Fixes: c0a54341c0e89333 ("perf evsel: Introduce event fallback method")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Leo Yan <leo.yan@arm.com>
Date: Mon Oct 6 17:21:24 2025 +0100
perf python: split Clang options when invoking Popen
[ Upstream commit c6a43bc3e8f6102a47da0d2e53428d08f00172fb ]
When passing a list to subprocess.Popen, each element maps to one argv
token. Current code bundles multiple Clang flags into a single element,
something like:
cmd = ['clang',
'--target=x86_64-linux-gnu -fintegrated-as -Wno-cast-function-type-mismatch',
'test-hello.c']
So Clang only sees one long, invalid option instead of separate flags,
as a result, the script cannot capture any log via PIPE.
Fix this by using shlex.split() to separate the string so each option
becomes its own argv element. The fixed list will be:
cmd = ['clang',
'--target=x86_64-linux-gnu',
'-fintegrated-as',
'-Wno-cast-function-type-mismatch',
'test-hello.c']
Fixes: 09e6f9f98370 ("perf python: Fix splitting CC into compiler and options")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-2-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Leo Yan <leo.yan@arm.com>
Date: Fri Aug 8 14:24:40 2025 +0100
perf session: Fix handling when buffer exceeds 2 GiB
[ Upstream commit c17dda8013495d8132c976cbf349be9949d0fbd1 ]
If a user specifies an AUX buffer larger than 2 GiB, the returned size
may exceed 0x80000000. Since the err variable is defined as a signed
32-bit integer, such a value overflows and becomes negative.
As a result, the perf record command reports an error:
0x146e8 [0x30]: failed to process type: 71 [Unknown error 183711232]
Change the type of the err variable to a signed 64-bit integer to
accommodate large buffer sizes correctly.
Fixes: d5652d865ea734a1 ("perf session: Add ability to skip 4GiB or more")
Reported-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250808-perf_fix_big_buffer_size-v1-1-45f45444a9a4@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ian Rogers <irogers@google.com>
Date: Thu Dec 12 09:33:54 2024 -0800
perf test stat: Avoid hybrid assumption when virtualized
commit f9c506fb69bdcfb9d7138281378129ff037f2aa1 upstream.
The cycles event will fallback to task-clock in the hybrid test when
running virtualized. Change the test to not fail for this.
Fixes: 65d11821910bd910 ("perf test: Add a test for default perf stat command")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241212173354.9860-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: James Clark <james.clark@linaro.org>
Date: Thu Sep 26 15:48:38 2024 +0100
perf test: Add a test for default perf stat command
[ Upstream commit 65d11821910bd910a2b4b5b005360d036c76ecef ]
Test that one cycles event is opened for each core PMU when "perf stat"
is run without arguments.
The event line can either be output as "pmu/cycles/" or just "cycles" if
there is only one PMU. Include 2 spaces for padding in the one PMU case
to avoid matching when the word cycles is included in metric
descriptions.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-8-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: 24937ee839e4 ("perf evsel: Ensure the fallback message is always written to")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ian Rogers <irogers@google.com>
Date: Thu Sep 18 15:22:00 2025 -0700
perf test: Don't leak workload gopipe in PERF_RECORD_*
[ Upstream commit 48918cacefd226af44373e914e63304927c0e7dc ]
The test starts a workload and then opens events. If the events fail
to open, for example because of perf_event_paranoid, the gopipe of the
workload is leaked and the file descriptor leak check fails when the
test exits. To avoid this cancel the workload when opening the events
fails.
Before:
```
$ perf test -vv 7
7: PERF_RECORD_* events & perf_sample fields:
--- start ---
test child forked, pid 1189568
Using CPUID GenuineIntel-6-B7-1
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
exclude_kernel 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
exclude_kernel 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3
Attempt to add: software/cpu-clock/
..after resolving event: software/config=0/
cpu-clock -> software/cpu-clock/
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x9 (PERF_COUNT_SW_DUMMY)
sample_type IP|TID|TIME|CPU
read_format ID|LOST
disabled 1
inherit 1
mmap 1
comm 1
enable_on_exec 1
task 1
sample_id_all 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
{ wakeup_events, wakeup_watermark } 1
------------------------------------------------------------
sys_perf_event_open: pid 1189569 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
perf_evlist__open: Permission denied
---- end(-2) ----
Leak of file descriptor 6 that opened: 'pipe:[14200347]'
---- unexpected signal (6) ----
iFailed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
#0 0x565358f6666e in child_test_sig_handler builtin-test.c:311
#1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0
#2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44
#3 0x7f29ce849cc2 in raise raise.c:27
#4 0x7f29ce8324ac in abort abort.c:81
#5 0x565358f662d4 in check_leaks builtin-test.c:226
#6 0x565358f6682e in run_test_child builtin-test.c:344
#7 0x565358ef7121 in start_command run-command.c:128
#8 0x565358f67273 in start_test builtin-test.c:545
#9 0x565358f6771d in __cmd_test builtin-test.c:647
#10 0x565358f682bd in cmd_test builtin-test.c:849
#11 0x565358ee5ded in run_builtin perf.c:349
#12 0x565358ee6085 in handle_internal_command perf.c:401
#13 0x565358ee61de in run_argv perf.c:448
#14 0x565358ee6527 in main perf.c:555
#15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74
#16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
#17 0x565358e391c1 in _start perf[851c1]
7: PERF_RECORD_* events & perf_sample fields : FAILED!
```
After:
```
$ perf test 7
7: PERF_RECORD_* events & perf_sample fields : Skip (permissions)
```
Fixes: 16d00fee703866c6 ("perf tests: Move test__PERF_RECORD into separate object")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Namhyung Kim <namhyung@kernel.org>
Date: Tue Oct 15 23:23:51 2024 -0700
perf tools: Add fallback for exclude_guest
[ Upstream commit bb6e7cb11d97ce1957894d30d13bfad3e8bfefe9 ]
Commit 7b100989b4f6bce70 ("perf evlist: Remove __evlist__add_default")
changed to parse "cycles:P" event instead of creating a new cycles
event for perf record. But it also changed the way how modifiers are
handled so it doesn't set the exclude_guest bit by default.
It seems Apple M1 PMU requires exclude_guest set and returns EOPNOTSUPP
if not. Let's add a fallback so that it can work with default events.
Also update perf stat hybrid tests to handle possible u or H modifiers.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-2-namhyung@kernel.org
Fixes: 7b100989b4f6bce70 ("perf evlist: Remove __evlist__add_default")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: 24937ee839e4 ("perf evsel: Ensure the fallback message is always written to")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunseong Kim <ysk@kzalloc.com>
Date: Fri Aug 22 16:25:08 2025 +0000
perf util: Fix compression checks returning -1 as bool
[ Upstream commit 43fa1141e2c1af79c91aaa4df03e436c415a6fc3 ]
The lzma_is_compressed and gzip_is_compressed functions are declared
to return a "bool" type, but in case of an error (e.g., file open
failure), they incorrectly returned -1.
A bool type is a boolean value that is either true or false.
Returning -1 for a bool return type can lead to unexpected behavior
and may violate strict type-checking in some compilers.
Fix the return value to be false in error cases, ensuring the function
adheres to its declared return type improves for preventing potential
bugs related to type mismatch.
Fixes: 4b57fd44b61beb51 ("perf tools: Add lzma_is_compressed function")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/r/20250822162506.316844-3-ysk@kzalloc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: gaoxiang17 <gaoxiang17@xiaomi.com>
Date: Sat Aug 2 10:21:23 2025 +0800
pid: Add a judgment for ns null in pid_nr_ns
[ Upstream commit 006568ab4c5ca2309ceb36fa553e390b4aa9c0c7 ]
__task_pid_nr_ns
ns = task_active_pid_ns(current);
pid_nr_ns(rcu_dereference(*task_pid_ptr(task, type)), ns);
if (pid && ns->level <= pid->level) {
Sometimes null is returned for task_active_pid_ns. Then it will trigger kernel panic in pid_nr_ns.
For example:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=00000002175aa000
[0000000000000058] pgd=08000002175ab003, p4d=08000002175ab003, pud=08000002175ab003, pmd=08000002175be003, pte=0000000000000000
pstate: 834000c5 (Nzcv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : __task_pid_nr_ns+0x74/0xd0
lr : __task_pid_nr_ns+0x24/0xd0
sp : ffffffc08001bd10
x29: ffffffc08001bd10 x28: ffffffd4422b2000 x27: 0000000000000001
x26: ffffffd442821168 x25: ffffffd442821000 x24: 00000f89492eab31
x23: 00000000000000c0 x22: ffffff806f5693c0 x21: ffffff806f5693c0
x20: 0000000000000001 x19: 0000000000000000 x18: 0000000000000000
x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 00000000023a1adc
x14: 0000000000000003 x13: 00000000007ef6d8 x12: 001167c391c78800
x11: 00ffffffffffffff x10: 0000000000000000 x9 : 0000000000000001
x8 : ffffff80816fa3c0 x7 : 0000000000000000 x6 : 49534d702d535449
x5 : ffffffc080c4c2c0 x4 : ffffffd43ee128c8 x3 : ffffffd43ee124dc
x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffffff806f5693c0
Call trace:
__task_pid_nr_ns+0x74/0xd0
...
__handle_irq_event_percpu+0xd4/0x284
handle_irq_event+0x48/0xb0
handle_fasteoi_irq+0x160/0x2d8
generic_handle_domain_irq+0x44/0x60
gic_handle_irq+0x4c/0x114
call_on_irq_stack+0x3c/0x74
do_interrupt_handler+0x4c/0x84
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
account_kernel_stack+0x60/0x144
exit_task_stack_account+0x1c/0x80
do_exit+0x7e4/0xaf8
...
get_signal+0x7bc/0x8d8
do_notify_resume+0x128/0x828
el0_svc+0x6c/0x70
el0t_64_sync_handler+0x68/0xbc
el0t_64_sync+0x1a8/0x1ac
Code: 35fffe54 911a02a8 f9400108 b4000128 (b9405a69)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
Signed-off-by: gaoxiang17 <gaoxiang17@xiaomi.com>
Link: https://lore.kernel.org/20250802022123.3536934-1-gxxa03070307@gmail.com
Reviewed-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sat Aug 30 13:16:58 2025 +0200
pinctrl: samsung: Drop unused S3C24xx driver data
commit 358253fa8179ab4217ac283b56adde0174186f87 upstream.
Drop unused declarations after S3C24xx SoC family removal in the commit
61b7f8920b17 ("ARM: s3c: remove all s3c24xx support").
Fixes: 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250830111657.126190-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dzmitry Sankouski <dsankouski@gmail.com>
Date: Thu Sep 18 20:06:45 2025 +0300
power: supply: max77976_charger: fix constant current reporting
commit ee6cd8f3e28ee5a929c3b67c01a350f550f9b73a upstream.
CHARGE_CONTROL_LIMIT is a wrong property to report charge current limit,
because `CHARGE_*` attributes represents capacity, not current. The
correct attribute to report and set charge current limit is
CONSTANT_CHARGE_CURRENT.
Rename CHARGE_CONTROL_LIMIT to CONSTANT_CHARGE_CURRENT.
Cc: stable@vger.kernel.org
Fixes: 715ecbc10d6a ("power: supply: max77976: add Maxim MAX77976 charger driver")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nam Cao <namcao@linutronix.de>
Date: Mon Aug 4 12:07:28 2025 +0200
powerpc/powernv/pci: Fix underflow and leak issue
commit a39087905af9ffecaa237a918a2c03a04e479934 upstream.
pnv_irq_domain_alloc() allocates interrupts at parent's interrupt
domain. If it fails in the progress, all allocated interrupts are
freed.
The number of successfully allocated interrupts so far is stored
"i". However, "i - 1" interrupts are freed. This is broken:
- One interrupt is not be freed
- If "i" is zero, "i - 1" wraps around
Correct the number of freed interrupts to "i".
Fixes: 0fcfe2247e75 ("powerpc/powernv/pci: Add MSI domains")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/70f8debe8688e0b467367db769b71c20146a836d.1754300646.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nam Cao <namcao@linutronix.de>
Date: Mon Aug 4 12:07:27 2025 +0200
powerpc/pseries/msi: Fix potential underflow and leak issue
commit 3443ff3be6e59b80d74036bb39f5b6409eb23cc9 upstream.
pseries_irq_domain_alloc() allocates interrupts at parent's interrupt
domain. If it fails in the progress, all allocated interrupts are
freed.
The number of successfully allocated interrupts so far is stored
"i". However, "i - 1" interrupts are freed. This is broken:
- One interrupt is not be freed
- If "i" is zero, "i - 1" wraps around
Correct the number of freed interrupts to 'i'.
Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/a980067f2b256bf716b4cd713bc1095966eed8cd.1754300646.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jisheng Zhang <jszhang@kernel.org>
Date: Tue Aug 19 19:42:24 2025 +0800
pwm: berlin: Fix wrong register in suspend/resume
commit 3a4b9d027e4061766f618292df91760ea64a1fcc upstream.
The 'enable' register should be BERLIN_PWM_EN rather than
BERLIN_PWM_ENABLE, otherwise, the driver accesses wrong address, there
will be cpu exception then kernel panic during suspend/resume.
Fixes: bbf0722c1c66 ("pwm: berlin: Add suspend/resume support")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20250819114224.31825-1-jszhang@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Corey Minyard <corey@minyard.net>
Date: Wed Aug 20 11:03:13 2025 -0500
Revert "ipmi: fix msg stack when IPMI is disconnected"
commit 5d09ee1bec870263f4ace439402ea840503b503b upstream.
This reverts commit c608966f3f9c2dca596967501d00753282b395fc.
This patch has a subtle bug that can cause the IPMI driver to go into an
infinite loop if the BMC misbehaves in a certain way. Apparently
certain BMCs do misbehave this way because several reports have come in
recently about this.
Signed-off-by: Corey Minyard <corey@minyard.net>
Tested-by: Eric Hagberg <ehagberg@janestreet.com>
Cc: <stable@vger.kernel.org> # 6.2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Tue Aug 19 15:29:44 2025 -0700
rseq/selftests: Use weak symbol reference, not definition, to link with glibc
commit a001cd248ab244633c5fabe4f7c707e13fc1d1cc upstream.
Add "extern" to the glibc-defined weak rseq symbols to convert the rseq
selftest's usage from weak symbol definitions to weak symbol _references_.
Effectively re-defining the glibc symbols wreaks havoc when building with
-fno-common, e.g. generates segfaults when running multi-threaded programs,
as dynamically linked applications end up with multiple versions of the
symbols.
Building with -fcommon, which until recently has the been the default for
GCC and clang, papers over the bug by allowing the linker to resolve the
weak/tentative definition to glibc's "real" definition.
Note, the symbol itself (or rather its address), not the value of the
symbol, is set to 0/NULL for unresolved weak symbol references, as the
symbol doesn't exist and thus can't have a value. Check for a NULL rseq
size pointer to handle the scenario where the test is statically linked
against a libc that doesn't support rseq in any capacity.
Fixes: 3bcbc20942db ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/87frdoybk4.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Wed Oct 15 21:31:44 2025 -0400
rseq: Protect event mask against membarrier IPI
[ Upstream commit 6eb350a2233100a283f882c023e5ad426d0ed63b ]
rseq_need_restart() reads and clears task::rseq_event_mask with preemption
disabled to guard against the scheduler.
But membarrier() uses an IPI and sets the PREEMPT bit in the event mask
from the IPI, which leaves that RMW operation unprotected.
Use guard(irq) if CONFIG_MEMBARRIER is enabled to fix that.
Fixes: 2a36ab717e8f ("rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
[ Applied changes to include/linux/sched.h instead of include/linux/rseq.h ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Esben Haabendal <esben@geanix.com>
Date: Fri May 16 09:23:39 2025 +0200
rtc: interface: Ensure alarm irq is enabled when UIE is enabled
commit 9db26d5855d0374d4652487bfb5aacf40821c469 upstream.
When setting a normal alarm, user-space is responsible for using
RTC_AIE_ON/RTC_AIE_OFF to control if alarm irq should be enabled.
But when RTC_UIE_ON is used, interrupts must be enabled so that the
requested irq events are generated.
When RTC_UIE_OFF is used, alarm irq is disabled if there are no other
alarms queued, so this commit brings symmetry to that.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-5-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Esben Haabendal <esben@geanix.com>
Date: Fri May 16 09:23:35 2025 +0200
rtc: interface: Fix long-standing race when setting alarm
commit 795cda8338eab036013314dbc0b04aae728880ab upstream.
As described in the old comment dating back to
commit 6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events")
from 2010, we have been living with a race window when setting alarm
with an expiry in the near future (i.e. next second).
With 1 second resolution, it can happen that the second ticks after the
check for the timer having expired, but before the alarm is actually set.
When this happen, no alarm IRQ is generated, at least not with some RTC
chips (isl12022 is an example of this).
With UIE RTC timer being implemented on top of alarm irq, being re-armed
every second, UIE will occasionally fail to work, as an alarm irq lost
due to this race will stop the re-arming loop.
For now, I have limited the additional expiry check to only be done for
alarms set to next seconds. I expect it should be good enough, although I
don't know if we can now for sure that systems with loads could end up
causing the same problems for alarms set 2 seconds or even longer in the
future.
I haven't been able to reproduce the problem with this check in place.
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-1-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Clément Le Goffic <clement.legoffic@foss.st.com>
Date: Tue Jul 15 16:07:13 2025 +0200
rtc: optee: fix memory leak on driver removal
[ Upstream commit a531350d2fe58f7fc4516e555f22391dee94efd9 ]
Fix a memory leak in case of driver removal.
Free the shared memory used for arguments exchanges between kernel and
OP-TEE RTC PTA.
Fixes: 81c2f059ab90 ("rtc: optee: add RTC driver for OP-TEE RTC PTA")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250715-upstream-optee-rtc-v1-1-e0fdf8aae545@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rob Herring (Arm) <robh@kernel.org>
Date: Thu Aug 21 16:57:02 2025 -0500
rtc: x1205: Fix Xicor X1205 vendor prefix
[ Upstream commit 606d19ee37de3a72f1b6e95a4ea544f6f20dbb46 ]
The vendor for the X1205 RTC is not Xircom, but Xicor which was acquired
by Intersil. Since the I2C subsystem drops the vendor prefix for driver
matching, the vendor prefix hasn't mattered.
Fixes: 6875404fdb44 ("rtc: x1205: Add DT probing support")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250821215703.869628-2-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ilya Leoshkevich <iii@linux.ibm.com>
Date: Thu Oct 16 23:51:25 2025 +0200
s390/bpf: Centralize frame offset calculations
commit b2268d550d20ff860bddfe3a91b1aec00414689a upstream.
The calculation of the distance from %r15 to the caller-allocated
portion of the stack frame is copy-pasted into multiple places in the
JIT code.
Move it to bpf_jit_prog() and save the result into bpf_jit::frame_off,
so that the other parts of the JIT can use it.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250624121501.50536-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ilya Leoshkevich <iii@linux.ibm.com>
Date: Thu Oct 16 23:51:24 2025 +0200
s390/bpf: Change seen_reg to a mask
commit 7ba4f43e16de351fe9821de80e15d88c884b2967 upstream.
Using a mask instead of an array saves a small amount of memory and
allows marking multiple registers as seen with a simple "or". Another
positive side-effect is that it speeds up verification with jitterbug.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240703005047.40915-2-iii@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ilya Leoshkevich <iii@linux.ibm.com>
Date: Thu Oct 16 23:51:26 2025 +0200
s390/bpf: Describe the frame using a struct instead of constants
commit e26d523edf2a62b142d2dd2dd9b87f61ed92f33a upstream.
Currently the caller-allocated portion of the stack frame is described
using constants, hardcoded values, and an ASCII drawing, making it
harder than necessary to ensure that everything is in sync.
Declare a struct and use offsetof() and offsetofend() macros to refer
to various values stored within the frame.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250624121501.50536-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ilya Leoshkevich <iii@linux.ibm.com>
Date: Thu Oct 16 23:51:27 2025 +0200
s390/bpf: Write back tail call counter for BPF_PSEUDO_CALL
commit c861a6b147137d10b5ff88a2c492ba376cd1b8b0 upstream.
The tailcall_bpf2bpf_hierarchy_1 test hangs on s390. Its call graph is
as follows:
entry()
subprog_tail()
bpf_tail_call_static(0) -> entry + tail_call_start
subprog_tail()
bpf_tail_call_static(0) -> entry + tail_call_start
entry() copies its tail call counter to the subprog_tail()'s frame,
which then increments it. However, the incremented result is discarded,
leading to an astronomically large number of tail calls.
Fix by writing the incremented counter back to the entry()'s frame.
Fixes: dd691e847d28 ("s390/bpf: Implement bpf_jit_supports_subprog_tailcalls()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-3-iii@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ilya Leoshkevich <iii@linux.ibm.com>
Date: Thu Oct 16 23:51:28 2025 +0200
s390/bpf: Write back tail call counter for BPF_TRAMP_F_CALL_ORIG
commit bc3905a71f02511607d3ccf732360580209cac4c upstream.
The tailcall_bpf2bpf_hierarchy_fentry test hangs on s390. Its call
graph is as follows:
entry()
subprog_tail()
trampoline()
fentry()
the rest of subprog_tail() # via BPF_TRAMP_F_CALL_ORIG
return to entry()
The problem is that the rest of subprog_tail() increments the tail call
counter, but the trampoline discards the incremented value. This
results in an astronomically large number of tail calls.
Fix by making the trampoline write the incremented tail call counter
back.
Fixes: 528eb2cb87bc ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-4-iii@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Harshit Agarwal <harshit@nutanix.com>
Date: Tue Apr 8 04:50:21 2025 +0000
sched/deadline: Fix race in push_dl_task()
commit 8fd5485fb4f3d9da3977fd783fcb8e5452463420 upstream.
When a CPU chooses to call push_dl_task and picks a task to push to
another CPU's runqueue then it will call find_lock_later_rq method
which would take a double lock on both CPUs' runqueues. If one of the
locks aren't readily available, it may lead to dropping the current
runqueue lock and reacquiring both the locks at once. During this window
it is possible that the task is already migrated and is running on some
other CPU. These cases are already handled. However, if the task is
migrated and has already been executed and another CPU is now trying to
wake it up (ttwu) such that it is queued again on the runqeue
(on_rq is 1) and also if the task was run by the same CPU, then the
current checks will pass even though the task was migrated out and is no
longer in the pushable tasks list.
Please go through the original rt change for more details on the issue.
To fix this, after the lock is obtained inside the find_lock_later_rq,
it ensures that the task is still at the head of pushable tasks list.
Also removed some checks that are no longer needed with the addition of
this new check.
However, the new check of pushable tasks list only applies when
find_lock_later_rq is called by push_dl_task. For the other caller i.e.
dl_task_offline_migration, existing checks are used.
Signed-off-by: Harshit Agarwal <harshit@nutanix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250408045021.3283624-1-harshit@nutanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thorsten Blum <thorsten.blum@linux.dev>
Date: Fri Sep 19 11:26:37 2025 +0200
scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl()
commit b81296591c567b12d3873b05a37b975707959b94 upstream.
Replace kmalloc() followed by copy_from_user() with memdup_user() to fix
a memory leak that occurs when copy_from_user(buff[sg_used],,) fails and
the 'cleanup1:' path does not free the memory for 'buff[sg_used]'. Using
memdup_user() avoids this by freeing the memory internally.
Since memdup_user() already allocates memory, use kzalloc() in the else
branch instead of manually zeroing 'buff[sg_used]' using memset(0).
Cc: stable@vger.kernel.org
Fixes: edd163687ea5 ("[SCSI] hpsa: add driver for HP Smart Array controllers.")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Duoming Zhou <duoming@zju.edu.cn>
Date: Sat Sep 20 21:42:01 2025 +0800
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
[ Upstream commit 60cd16a3b7439ccb699d0bf533799eeb894fd217 ]
During the detaching of Marvell's SAS/SATA controller, the original code
calls cancel_delayed_work() in mvs_free() to cancel the delayed work
item mwq->work_q. However, if mwq->work_q is already running, the
cancel_delayed_work() may fail to cancel it. This can lead to
use-after-free scenarios where mvs_free() frees the mvs_info while
mvs_work_queue() is still executing and attempts to access the
already-freed mvs_info.
A typical race condition is illustrated below:
CPU 0 (remove) | CPU 1 (delayed work callback)
mvs_pci_remove() |
mvs_free() | mvs_work_queue()
cancel_delayed_work() |
kfree(mvi) |
| mvi-> // UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled and any executing
delayed work item completes before the mvs_info is deallocated.
This bug was found by static analysis.
Fixes: 20b09c2992fe ("[SCSI] mvsas: add support for 94xx; layout change; bug fixes")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Biggers <ebiggers@kernel.org>
Date: Mon Aug 18 13:54:23 2025 -0700
sctp: Fix MAC comparison to be constant-time
commit dd91c79e4f58fbe2898dac84858033700e0e99fb upstream.
To prevent timing attacks, MACs need to be compared in constant time.
Use the appropriate helper function for this.
Fixes: bbd0d59809f9 ("[SCTP]: Implement the receive and verification of AUTH chunk")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250818205426.30222-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lance Yang <lance.yang@linux.dev>
Date: Wed Sep 17 21:31:37 2025 +0800
selftests/mm: skip soft-dirty tests when CONFIG_MEM_SOFT_DIRTY is disabled
commit 0389c305ef56cbadca4cbef44affc0ec3213ed30 upstream.
The madv_populate and soft-dirty kselftests currently fail on systems
where CONFIG_MEM_SOFT_DIRTY is disabled.
Introduce a new helper softdirty_supported() into vm_util.c/h to ensure
tests are properly skipped when the feature is not enabled.
Link: https://lkml.kernel.org/r/20250917133137.62802-1-lance.yang@linux.dev
Fixes: 9f3265db6ae8 ("selftests: vm: add test for Soft-Dirty PTE bit")
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Thu Sep 25 12:32:37 2025 +0200
selftests: mptcp: join: validate C-flag + def limit
commit 008385efd05e04d8dff299382df2e8be0f91d8a0 upstream.
The previous commit adds an exception for the C-flag case. The
'mptcp_join.sh' selftest is extended to validate this case.
In this subtest, there is a typical CDN deployment with a client where
MPTCP endpoints have been 'automatically' configured:
- the server set net.mptcp.allow_join_initial_addr_port=0
- the client has multiple 'subflow' endpoints, and the default limits:
not accepting ADD_ADDRs.
Without the parent patch, the client is not able to establish new
subflows using its 'subflow' endpoints. The parent commit fixes that.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: df377be38725 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-2-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Paulo Alcantara <pc@manguebit.org>
Date: Tue Oct 7 16:23:24 2025 -0300
smb: client: fix missing timestamp updates after utime(2)
[ Upstream commit b95cd1bdf5aa9221c98fc9259014b8bb8d1829d7 ]
Don't reuse open handle when changing timestamps to prevent the server
from disabling automatic timestamp updates as per MS-FSA 2.1.4.17.
---8<---
import os
import time
filename = '/mnt/foo'
def print_stat(prefix):
st = os.stat(filename)
print(prefix, ': ', time.ctime(st.st_atime), time.ctime(st.st_ctime))
fd = os.open(filename, os.O_CREAT|os.O_TRUNC|os.O_WRONLY, 0o644)
print_stat('old')
os.utime(fd, None)
time.sleep(2)
os.write(fd, b'foo')
os.close(fd)
time.sleep(2)
print_stat('new')
---8<---
Before patch:
$ mount.cifs //srv/share /mnt -o ...
$ python3 run.py
old : Fri Oct 3 14:01:21 2025 Fri Oct 3 14:01:21 2025
new : Fri Oct 3 14:01:21 2025 Fri Oct 3 14:01:21 2025
After patch:
$ mount.cifs //srv/share /mnt -o ...
$ python3 run.py
old : Fri Oct 3 17:03:34 2025 Fri Oct 3 17:03:34 2025
new : Fri Oct 3 17:03:36 2025 Fri Oct 3 17:03:36 2025
Fixes: b6f2a0f89d7e ("cifs: for compound requests, use open handle if possible")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anthony Yznaga <anthony.yznaga@oracle.com>
Date: Tue Jul 15 18:24:46 2025 -0700
sparc64: fix hugetlb for sun4u
commit 6fd44a481b3c6111e4801cec964627791d0f3ec5 upstream.
An attempt to exercise sparc hugetlb code in a sun4u-based guest
running under qemu results in the guest hanging due to being stuck
in a trap loop. This is due to invalid hugetlb TTEs being installed
that do not have the expected _PAGE_PMD_HUGE and page size bits set.
Although the breakage has gone apparently unnoticed for several years,
fix it now so there is the option to exercise sparc hugetlb code under
qemu. This can be useful because sun4v support in qemu does not support
linux guests currently and sun4v-based hardware resources may not be
readily available.
Fix tested with a 6.15.2 and 6.16-rc6 kernels by running libhugetlbfs
tests on a qemu guest running Debian 13.
Fixes: c7d9f77d33a7 ("sparc64: Multi-page size support")
Cc: stable@vger.kernel.org
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250716012446.10357-1-anthony.yznaga@oracle.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Sat Sep 20 20:53:12 2025 +0800
sparc: fix error handling in scan_one_device()
commit 302c04110f0ce70d25add2496b521132548cd408 upstream.
Once of_device_register() failed, we should call put_device() to
decrement reference count for cleanup. Or it could cause memory leak.
So fix this by calling put_device(), then the name can be freed in
kobject_cleanup().
Calling path: of_device_register() -> of_device_add() -> device_add().
As comment of device_add() says, 'if device_add() succeeds, you should
call device_del() when you want to get rid of it. If device_add() has
not succeeded, use only put_device() to drop the reference count'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: cf44bbc26cf1 ("[SPARC]: Beginnings of generic of_device framework.")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pratyush Yadav <pratyush@kernel.org>
Date: Sat Sep 6 00:29:56 2025 +0530
spi: cadence-quadspi: Flush posted register writes before DAC access
commit 1ad55767e77a853c98752ed1e33b68049a243bd7 upstream.
cqspi_read_setup() and cqspi_write_setup() program the address width as
the last step in the setup. This is likely to be immediately followed by
a DAC region read/write. On TI K3 SoCs the DAC region is on a different
endpoint from the register region. This means that the order of the two
operations is not guaranteed, and they might be reordered at the
interconnect level. It is possible that the DAC read/write goes through
before the address width update goes through. In this situation if the
previous command used a different address width the OSPI command is sent
with the wrong number of address bytes, resulting in an invalid command
and undefined behavior.
Read back the size register to make sure the write gets flushed before
accessing the DAC region.
Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
CC: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-3-s-k6@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pratyush Yadav <pratyush@kernel.org>
Date: Sat Sep 6 00:29:55 2025 +0530
spi: cadence-quadspi: Flush posted register writes before INDAC access
commit 29e0b471ccbd674d20d4bbddea1a51e7105212c5 upstream.
cqspi_indirect_read_execute() and cqspi_indirect_write_execute() first
set the enable bit on APB region and then start reading/writing to the
AHB region. On TI K3 SoCs these regions lie on different endpoints. This
means that the order of the two operations is not guaranteed, and they
might be reordered at the interconnect level.
It is possible for the AHB write to be executed before the APB write to
enable the indirect controller, causing the transaction to be invalid
and the write erroring out. Read back the APB region write before
accessing the AHB region to make sure the write got flushed and the race
condition is eliminated.
Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
CC: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-2-s-k6@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Phillip Lougher <phillip@squashfs.org.uk>
Date: Mon Oct 13 16:24:43 2025 -0400
Squashfs: add additional inode sanity checking
[ Upstream commit 9ee94bfbe930a1b39df53fa2d7b31141b780eb5a ]
Patch series "Squashfs: performance improvement and a sanity check".
This patchset adds an additional sanity check when reading regular file
inodes, and adds support for SEEK_DATA/SEEK_HOLE lseek() whence values.
This patch (of 2):
Add an additional sanity check when reading regular file inodes.
A regular file if the file size is an exact multiple of the filesystem
block size cannot have a fragment. This is because by definition a
fragment block stores tailends which are not a whole block in size.
Link: https://lkml.kernel.org/r/20250923220652.568416-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20250923220652.568416-2-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 9f1c14c1de1b ("Squashfs: reject negative file sizes in squashfs_read_inode()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Phillip Lougher <phillip@squashfs.org.uk>
Date: Mon Oct 13 16:24:44 2025 -0400
Squashfs: reject negative file sizes in squashfs_read_inode()
[ Upstream commit 9f1c14c1de1bdde395f6cc893efa4f80a2ae3b2b ]
Syskaller reports a "WARNING in ovl_copy_up_file" in overlayfs.
This warning is ultimately caused because the underlying Squashfs file
system returns a file with a negative file size.
This commit checks for a negative file size and returns EINVAL.
[phillip@squashfs.org.uk: only need to check 64 bit quantity]
Link: https://lkml.kernel.org/r/20250926222305.110103-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20250926215935.107233-1-phillip@squashfs.org.uk
Fixes: 6545b246a2c8 ("Squashfs: inode operations")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+f754e01116421e9754b9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68d580e5.a00a0220.303701.0019.GAE@google.com/
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kuniyuki Iwashima <kuniyu@google.com>
Date: Wed Oct 1 23:37:54 2025 +0000
tcp: Don't call reqsk_fastopen_remove() in tcp_conn_request().
[ Upstream commit 2e7cbbbe3d61c63606994b7ff73c72537afe2e1c ]
syzbot reported the splat below in tcp_conn_request(). [0]
If a listener is close()d while a TFO socket is being processed in
tcp_conn_request(), inet_csk_reqsk_queue_add() does not set reqsk->sk
and calls inet_child_forget(), which calls tcp_disconnect() for the
TFO socket.
After the cited commit, tcp_disconnect() calls reqsk_fastopen_remove(),
where reqsk_put() is called due to !reqsk->sk.
Then, reqsk_fastopen_remove() in tcp_conn_request() decrements the
last req->rsk_refcnt and frees reqsk, and __reqsk_free() at the
drop_and_free label causes the refcount underflow for the listener
and double-free of the reqsk.
Let's remove reqsk_fastopen_remove() in tcp_conn_request().
Note that other callers make sure tp->fastopen_rsk is not NULL.
[0]:
refcount_t: underflow; use-after-free.
WARNING: CPU: 12 PID: 5563 at lib/refcount.c:28 refcount_warn_saturate (lib/refcount.c:28)
Modules linked in:
CPU: 12 UID: 0 PID: 5563 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:refcount_warn_saturate (lib/refcount.c:28)
Code: ab e8 8e b4 98 ff 0f 0b c3 cc cc cc cc cc 80 3d a4 e4 d6 01 00 75 9c c6 05 9b e4 d6 01 01 48 c7 c7 e8 df fb ab e8 6a b4 98 ff <0f> 0b e9 03 5b 76 00 cc 80 3d 7d e4 d6 01 00 0f 85 74 ff ff ff c6
RSP: 0018:ffffa79fc0304a98 EFLAGS: 00010246
RAX: d83af4db1c6b3900 RBX: ffff9f65c7a69020 RCX: d83af4db1c6b3900
RDX: 0000000000000000 RSI: 00000000ffff7fff RDI: ffffffffac78a280
RBP: 000000009d781b60 R08: 0000000000007fff R09: ffffffffac6ca280
R10: 0000000000017ffd R11: 0000000000000004 R12: ffff9f65c7b4f100
R13: ffff9f65c7d23c00 R14: ffff9f65c7d26000 R15: ffff9f65c7a64ef8
FS: 00007f9f962176c0(0000) GS:ffff9f65fcf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000000180 CR3: 000000000dbbe006 CR4: 0000000000372ef0
Call Trace:
<IRQ>
tcp_conn_request (./include/linux/refcount.h:400 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 ./include/net/sock.h:1965 ./include/net/request_sock.h:131 net/ipv4/tcp_input.c:7301)
tcp_rcv_state_process (net/ipv4/tcp_input.c:6708)
tcp_v6_do_rcv (net/ipv6/tcp_ipv6.c:1670)
tcp_v6_rcv (net/ipv6/tcp_ipv6.c:1906)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:438)
ip6_input (net/ipv6/ip6_input.c:500)
ipv6_rcv (net/ipv6/ip6_input.c:311)
__netif_receive_skb (net/core/dev.c:6104)
process_backlog (net/core/dev.c:6456)
__napi_poll (net/core/dev.c:7506)
net_rx_action (net/core/dev.c:7569 net/core/dev.c:7696)
handle_softirqs (kernel/softirq.c:579)
do_softirq (kernel/softirq.c:480)
</IRQ>
Fixes: 45c8a6cc2bcd ("tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251001233755.1340927-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Oct 3 18:41:19 2025 +0000
tcp: take care of zero tp->window_clamp in tcp_set_rcvlowat()
[ Upstream commit 21b29e74ffe5a6c851c235bb80bf5ee26292c67b ]
Some applications (like selftests/net/tcp_mmap.c) call SO_RCVLOWAT
on their listener, before accept().
This has an unfortunate effect on wscale selection in
tcp_select_initial_window() during 3WHS.
For instance, tcp_mmap was negotiating wscale 4, regardless
of tcp_rmem[2] and sysctl_rmem_max.
Do not change tp->window_clamp if it is zero
or bigger than our computed value.
Zero value is special, it allows tcp_select_initial_window()
to enable autotuning.
Note that SO_RCVLOWAT use on listener is probably not wise,
because tp->scaling_ratio has a default value, possibly wrong.
Fixes: d1361840f8c5 ("tcp: fix SO_RCVLOWAT and RCVBUF autotuning")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20251003184119.2526655-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Leo Yan <leo.yan@arm.com>
Date: Mon Oct 6 17:21:23 2025 +0100
tools build: Align warning options with perf
[ Upstream commit 53d067feb8c4f16d1f24ce3f4df4450bb18c555f ]
The feature test programs are built without enabling '-Wall -Werror'
options. As a result, a feature may appear to be available, but later
building in perf can fail with stricter checks.
Make the feature test program use the same warning options as perf.
Fixes: 1925459b4d92 ("tools build: Fix feature Makefile issues with 'O='")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-1-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gunnar Kudrjavets <gunnarku@amazon.com>
Date: Thu Sep 18 18:49:40 2025 +0300
tpm_tis: Fix incorrect arguments in tpm_tis_probe_irq_single
[ Upstream commit 8a81236f2cb0882c7ea6c621ce357f7f3f601fe5 ]
The tpm_tis_write8() call specifies arguments in wrong order. Should be
(data, addr, value) not (data, value, addr). The initial correct order
was changed during the major refactoring when the code was split.
Fixes: 41a5e1cf1fe1 ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy")
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yuan Chen <chenyuan@kylinos.cn>
Date: Mon Oct 13 22:15:24 2025 -0400
tracing: Fix race condition in kprobe initialization causing NULL pointer dereference
[ Upstream commit 9cf9aa7b0acfde7545c1a1d912576e9bab28dc6f ]
There is a critical race condition in kprobe initialization that can lead to
NULL pointer dereference and kernel crash.
[1135630.084782] Unable to handle kernel paging request at virtual address 0000710a04630000
...
[1135630.260314] pstate: 404003c9 (nZcv DAIF +PAN -UAO)
[1135630.269239] pc : kprobe_perf_func+0x30/0x260
[1135630.277643] lr : kprobe_dispatcher+0x44/0x60
[1135630.286041] sp : ffffaeff4977fa40
[1135630.293441] x29: ffffaeff4977fa40 x28: ffffaf015340e400
[1135630.302837] x27: 0000000000000000 x26: 0000000000000000
[1135630.312257] x25: ffffaf029ed108a8 x24: ffffaf015340e528
[1135630.321705] x23: ffffaeff4977fc50 x22: ffffaeff4977fc50
[1135630.331154] x21: 0000000000000000 x20: ffffaeff4977fc50
[1135630.340586] x19: ffffaf015340e400 x18: 0000000000000000
[1135630.349985] x17: 0000000000000000 x16: 0000000000000000
[1135630.359285] x15: 0000000000000000 x14: 0000000000000000
[1135630.368445] x13: 0000000000000000 x12: 0000000000000000
[1135630.377473] x11: 0000000000000000 x10: 0000000000000000
[1135630.386411] x9 : 0000000000000000 x8 : 0000000000000000
[1135630.395252] x7 : 0000000000000000 x6 : 0000000000000000
[1135630.403963] x5 : 0000000000000000 x4 : 0000000000000000
[1135630.412545] x3 : 0000710a04630000 x2 : 0000000000000006
[1135630.421021] x1 : ffffaeff4977fc50 x0 : 0000710a04630000
[1135630.429410] Call trace:
[1135630.434828] kprobe_perf_func+0x30/0x260
[1135630.441661] kprobe_dispatcher+0x44/0x60
[1135630.448396] aggr_pre_handler+0x70/0xc8
[1135630.454959] kprobe_breakpoint_handler+0x140/0x1e0
[1135630.462435] brk_handler+0xbc/0xd8
[1135630.468437] do_debug_exception+0x84/0x138
[1135630.475074] el1_dbg+0x18/0x8c
[1135630.480582] security_file_permission+0x0/0xd0
[1135630.487426] vfs_write+0x70/0x1c0
[1135630.493059] ksys_write+0x5c/0xc8
[1135630.498638] __arm64_sys_write+0x24/0x30
[1135630.504821] el0_svc_common+0x78/0x130
[1135630.510838] el0_svc_handler+0x38/0x78
[1135630.516834] el0_svc+0x8/0x1b0
kernel/trace/trace_kprobe.c: 1308
0xffff3df8995039ec <kprobe_perf_func+0x2c>: ldr x21, [x24,#120]
include/linux/compiler.h: 294
0xffff3df8995039f0 <kprobe_perf_func+0x30>: ldr x1, [x21,x0]
kernel/trace/trace_kprobe.c
1308: head = this_cpu_ptr(call->perf_events);
1309: if (hlist_empty(head))
1310: return 0;
crash> struct trace_event_call -o
struct trace_event_call {
...
[120] struct hlist_head *perf_events; //(call->perf_event)
...
}
crash> struct trace_event_call ffffaf015340e528
struct trace_event_call {
...
perf_events = 0xffff0ad5fa89f088, //this value is correct, but x21 = 0
...
}
Race Condition Analysis:
The race occurs between kprobe activation and perf_events initialization:
CPU0 CPU1
==== ====
perf_kprobe_init
perf_trace_event_init
tp_event->perf_events = list;(1)
tp_event->class->reg (2)← KPROBE ACTIVE
Debug exception triggers
...
kprobe_dispatcher
kprobe_perf_func (tk->tp.flags & TP_FLAG_PROFILE)
head = this_cpu_ptr(call->perf_events)(3)
(perf_events is still NULL)
Problem:
1. CPU0 executes (1) assigning tp_event->perf_events = list
2. CPU0 executes (2) enabling kprobe functionality via class->reg()
3. CPU1 triggers and reaches kprobe_dispatcher
4. CPU1 checks TP_FLAG_PROFILE - condition passes (step 2 completed)
5. CPU1 calls kprobe_perf_func() and crashes at (3) because
call->perf_events is still NULL
CPU1 sees that kprobe functionality is enabled but does not see that
perf_events has been assigned.
Add pairing read and write memory barriers to guarantee that if CPU1
sees that kprobe functionality is enabled, it must also see that
perf_events has been assigned.
Link: https://lore.kernel.org/all/20251001022025.44626-1-chenyuan_fl@163.com/
Fixes: 50d780560785 ("tracing/kprobes: Add probe handler dispatcher to support perf and ftrace concurrent use")
Cc: stable@vger.kernel.org
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Muhammad Usama Anjum <usama.anjum@collabora.com>
Date: Tue Jul 22 10:31:21 2025 +0500
wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again
commit 32be3ca4cf78b309dfe7ba52fe2d7cc3c23c5634 upstream.
Don't deinitialize and reinitialize the HAL helpers. The dma memory is
deallocated and there is high possibility that we'll not be able to get
the same memory allocated from dma when there is high memory pressure.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.6
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org
Cc: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://patch.msgid.link/20250722053121.1145001-1-usama.anjum@collabora.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nick Morrow <morrownr@gmail.com>
Date: Fri Sep 12 15:45:56 2025 -0500
wifi: mt76: mt7921u: Add VID/PID for Netgear A7500
commit fc6627ca8a5f811b601aea74e934cf8a048c88ac upstream.
Add VID/PID 0846/9065 for Netgear A7500.
Reported-by: Autumn Dececco <autumndececco@gmail.com>
Tested-by: Autumn Dececco <autumndececco@gmail.com>
Signed-off-by: Nick Morrow <morrownr@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/80bacfd6-6073-4ce5-be32-ae9580832337@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jan Kara <jack@suse.cz>
Date: Fri Sep 12 12:38:37 2025 +0200
writeback: Avoid excessively long inode switching times
[ Upstream commit 9a6ebbdbd41235ea3bc0c4f39e2076599b8113cc ]
With lazytime mount option enabled we can be switching many dirty inodes
on cgroup exit to the parent cgroup. The numbers observed in practice
when systemd slice of a large cron job exits can easily reach hundreds
of thousands or millions. The logic in inode_do_switch_wbs() which sorts
the inode into appropriate place in b_dirty list of the target wb
however has linear complexity in the number of dirty inodes thus overall
time complexity of switching all the inodes is quadratic leading to
workers being pegged for hours consuming 100% of the CPU and switching
inodes to the parent wb.
Simple reproducer of the issue:
FILES=10000
# Filesystem mounted with lazytime mount option
MNT=/mnt/
echo "Creating files and switching timestamps"
for (( j = 0; j < 50; j ++ )); do
mkdir $MNT/dir$j
for (( i = 0; i < $FILES; i++ )); do
echo "foo" >$MNT/dir$j/file$i
done
touch -a -t 202501010000 $MNT/dir$j/file*
done
wait
echo "Syncing and flushing"
sync
echo 3 >/proc/sys/vm/drop_caches
echo "Reading all files from a cgroup"
mkdir /sys/fs/cgroup/unified/mycg1 || exit
echo $$ >/sys/fs/cgroup/unified/mycg1/cgroup.procs || exit
for (( j = 0; j < 50; j ++ )); do
cat /mnt/dir$j/file* >/dev/null &
done
wait
echo "Switching wbs"
# Now rmdir the cgroup after the script exits
We need to maintain b_dirty list ordering to keep writeback happy so
instead of sorting inode into appropriate place just append it at the
end of the list and clobber dirtied_time_when. This may result in inode
writeback starting later after cgroup switch however cgroup switches are
rare so it shouldn't matter much. Since the cgroup had write access to
the inode, there are no practical concerns of the possible DoS issues.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jan Kara <jack@suse.cz>
Date: Fri Sep 12 12:38:36 2025 +0200
writeback: Avoid softlockup when switching many inodes
[ Upstream commit 66c14dccd810d42ec5c73bb8a9177489dfd62278 ]
process_inode_switch_wbs_work() can be switching over 100 inodes to a
different cgroup. Since switching an inode requires counting all dirty &
under-writeback pages in the address space of each inode, this can take
a significant amount of time. Add a possibility to reschedule after
processing each inode to avoid softlockups.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Fri Aug 8 10:23:56 2025 -0700
x86/umip: Check that the instruction opcode is at least two bytes
commit 32278c677947ae2f042c9535674a7fff9a245dd3 upstream.
When checking for a potential UMIP violation on #GP, verify the decoder found
at least two opcode bytes to avoid false positives when the kernel encounters
an unknown instruction that starts with 0f. Because the array of opcode.bytes
is zero-initialized by insn_init(), peeking at bytes[1] will misinterpret
garbage as a potential SLDT or STR instruction, and can incorrectly trigger
emulation.
E.g. if a VPALIGNR instruction
62 83 c5 05 0f 08 ff vpalignr xmm17{k5},xmm23,XMMWORD PTR [r8],0xff
hits a #GP, the kernel emulates it as STR and squashes the #GP (and corrupts
the userspace code stream).
Arguably the check should look for exactly two bytes, but no three byte
opcodes use '0f 00 xx' or '0f 01 xx' as an escape, i.e. it should be
impossible to get a false positive if the first two opcode bytes match '0f 00'
or '0f 01'. Go with a more conservative check with respect to the existing
code to minimize the chances of breaking userspace, e.g. due to decoder
weirdness.
Analyzed by Nick Bray <ncbray@google.com>.
Fixes: 1e5db223696a ("x86/umip: Add emulation code for UMIP instructions")
Reported-by: Dan Snyder <dansnyder@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Fri Aug 8 10:23:57 2025 -0700
x86/umip: Fix decoding of register forms of 0F 01 (SGDT and SIDT aliases)
commit 27b1fd62012dfe9d3eb8ecde344d7aa673695ecf upstream.
Filter out the register forms of 0F 01 when determining whether or not to
emulate in response to a potential UMIP violation #GP, as SGDT and SIDT only
accept memory operands. The register variants of 0F 01 are used to encode
instructions for things like VMX and SGX, i.e. not checking the Mod field
would cause the kernel to incorrectly emulate on #GP, e.g. due to a CPL
violation on VMLAUNCH.
Fixes: 1e5db223696a ("x86/umip: Add emulation code for UMIP instructions")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jason Andryuk <jason.andryuk@amd.com>
Date: Wed Aug 27 20:36:01 2025 -0400
xen/events: Cleanup find_virq() return codes
commit 08df2d7dd4ab2db8a172d824cda7872d5eca460a upstream.
rc is overwritten by the evtchn_status hypercall in each iteration, so
the return value will be whatever the last iteration is. This could
incorrectly return success even if the event channel was not found.
Change to an explicit -ENOENT for an un-found virq and return 0 on a
successful match.
Fixes: 62cc5fc7b2e0 ("xen/pv-on-hvm kexec: rebind virqs to existing eventchannel ports")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-2-jason.andryuk@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jason Andryuk <jason.andryuk@amd.com>
Date: Wed Aug 27 20:36:02 2025 -0400
xen/events: Return -EEXIST for bound VIRQs
commit 07ce121d93a5e5fb2440a24da3dbf408fcee978e upstream.
Change find_virq() to return -EEXIST when a VIRQ is bound to a
different CPU than the one passed in. With that, remove the BUG_ON()
from bind_virq_to_irq() to propogate the error upwards.
Some VIRQs are per-cpu, but others are per-domain or global. Those must
be bound to CPU0 and can then migrate elsewhere. The lookup for
per-domain and global will probably fail when migrated off CPU 0,
especially when the current CPU is tracked. This now returns -EEXIST
instead of BUG_ON().
A second call to bind a per-domain or global VIRQ is not expected, but
make it non-fatal to avoid trying to look up the irq, since we don't
know which per_cpu(virq_to_irq) it will be in.
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-3-jason.andryuk@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jason Andryuk <jason.andryuk@amd.com>
Date: Wed Aug 27 20:36:03 2025 -0400
xen/events: Update virq_to_irq on migration
commit 3fcc8e146935415d69ffabb5df40ecf50e106131 upstream.
VIRQs come in 3 flavors, per-VPU, per-domain, and global, and the VIRQs
are tracked in per-cpu virq_to_irq arrays.
Per-domain and global VIRQs must be bound on CPU 0, and
bind_virq_to_irq() sets the per_cpu virq_to_irq at registration time
Later, the interrupt can migrate, and info->cpu is updated. When
calling __unbind_from_irq(), the per-cpu virq_to_irq is cleared for a
different cpu. If bind_virq_to_irq() is called again with CPU 0, the
stale irq is returned. There won't be any irq_info for the irq, so
things break.
Make xen_rebind_evtchn_to_cpu() update the per_cpu virq_to_irq mappings
to keep them update to date with the current cpu. This ensures the
correct virq_to_irq is cleared in __unbind_from_irq().
Fixes: e46cdb66c8fc ("xen: event channels")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-4-jason.andryuk@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lukas Wunner <lukas@wunner.de>
Date: Thu Sep 4 15:11:09 2025 +0200
xen/manage: Fix suspend error path
commit f770c3d858687252f1270265ba152d5c622e793f upstream.
The device power management API has the following asymmetry:
* dpm_suspend_start() does not clean up on failure
(it requires a call to dpm_resume_end())
* dpm_suspend_end() does clean up on failure
(it does not require a call to dpm_resume_start())
The asymmetry was introduced by commit d8f3de0d2412 ("Suspend-related
patches for 2.6.27") in June 2008: It removed a call to device_resume()
from device_suspend() (which was later renamed to dpm_suspend_start()).
When Xen began using the device power management API in May 2008 with
commit 0e91398f2a5d ("xen: implement save/restore"), the asymmetry did
not yet exist. But since it was introduced, a call to dpm_resume_end()
is missing in the error path of dpm_suspend_start(). Fix it.
Fixes: d8f3de0d2412 ("Suspend-related patches for 2.6.27")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.27
Reviewed-by: "Rafael J. Wysocki (Intel)" <rafael@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <22453676d1ddcebbe81641bb68ddf587fee7e21e.1756990799.git.lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Fri Aug 29 16:30:15 2025 +0800
xtensa: simdisk: add input size check in proc_write_simdisk
commit 5d5f08fd0cd970184376bee07d59f635c8403f63 upstream.
A malicious user could pass an arbitrarily bad value
to memdup_user_nul(), potentially causing kernel crash.
This follows the same pattern as commit ee76746387f6
("netdevsim: prevent bad user input in nsim_dev_health_break_write()")
Fixes: b6c7e873daf7 ("xtensa: ISS: add host file-based simulated disk")
Fixes: 16e5c1fc3604 ("convert a bunch of open-coded instances of memdup_user_nul()")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20250829083015.1992751-1-linmq006@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>