Author: Bagas Sanjaya <bagasdotme@gmail.com>
Date: Tue Mar 7 11:35:26 2023 +0700
accel: Link to compute accelerator subsystem intro
[ Upstream commit 6d179f84f274a87da51f24ac3e9427221bbaed51 ]
Commit 2c204f3d53218d ("accel: add dedicated minor for accelerator
devices") adds link to accelerator nodes section of DRM internals doc
(Documentation/gpu/drm-internals.rst), but the target doesn't exist.
Instead, there is only an introduction doc for computer accelerator
subsytem.
Link to that doc until there is documentation of accelerator internals.
Fixes: 2c204f3d53218d ("accel: add dedicated minor for accelerator devices")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Fri Apr 14 16:00:48 2023 +0200
ACPI: bus: Ensure that notify handlers are not running after removal
[ Upstream commit faae443738c6f0dac9b0d3d11d108f6911a989a9 ]
Currently, acpi_device_remove_notify_handler() may return while the
notify handler being removed is still running which may allow the
module holding that handler to be torn down prematurely.
Address this issue by making acpi_device_remove_notify_handler() wait
for the handling of all the ACPI events in progress to complete before
returning.
Fixes: 5894b0c46e49 ("ACPI / scan: Move bus operations and notification routines to bus.c")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Thu Apr 20 13:02:20 2023 +0200
ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini
[ Upstream commit 9b04d99788cf475cbd277f30ec66230ccb7e99f4 ]
The CPR3 power resource on the Toshiba Click Mini toggles a GPIO
which is called SISP (for SIS touchscreen power?) on/off.
This CPR3 power resource is not listed in any _PR? lists, let alone
in a _PR0 list for the SIS0817 touchscreen ACPI device which needs it.
Before commit a1224f34d72a ("ACPI: PM: Check states of power resources
during initialization") this was not an issue because since nothing
referenced the CPR3 power resource its state was always
ACPI_POWER_RESOURCE_STATE_UNKNOWN and power resources with this state
get ignored by acpi_turn_off_unused_power_resources().
This clearly is a bug in the DSDT of this device. Add a DMI quirk
to make acpi_turn_off_unused_power_resources() a no-op on this
model to fix the touchscreen no longer working since kernel 5.16 .
This quirk also causes 2 other power resources to not get turned
off, but the _OFF method on these already was a no-op, so this makes
no difference for the other 2 power resources.
Fixes: a1224f34d72a ("ACPI: PM: Check states of power resources during initialization")
Reported-by: Gé Koerkamp <ge.koerkamp@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216946
Link: https://lore.kernel.org/regressions/32a14a8a-9795-4c8c-7e00-da9012f548f8@leemhuis.info/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Roger Pau Monne <roger.pau@citrix.com>
Date: Wed Mar 22 12:13:29 2023 +0100
ACPI: processor: Fix evaluating _PDC method when running as Xen dom0
[ Upstream commit 073828e954459b883f23e53999d31e4c55ab9654 ]
In ACPI systems, the OS can direct power management, as opposed to the
firmware. This OS-directed Power Management is called OSPM. Part of
telling the firmware that the OS going to direct power management is
making ACPI "_PDC" (Processor Driver Capabilities) calls. These _PDC
methods must be evaluated for every processor object. If these _PDC
calls are not completed for every processor it can lead to
inconsistency and later failures in things like the CPU frequency
driver.
In a Xen system, the dom0 kernel is responsible for system-wide power
management. The dom0 kernel is in charge of OSPM. However, the
number of CPUs available to dom0 can be different than the number of
CPUs physically present on the system.
This leads to a problem: the dom0 kernel needs to evaluate _PDC for
all the processors, but it can't always see them.
In dom0 kernels, ignore the existing ACPI method for determining if a
processor is physically present because it might not be accurate.
Instead, ask the hypervisor for this information.
Fix this by introducing a custom function to use when running as Xen
dom0 in order to check whether a processor object matches a CPU that's
online. Such checking is done using the existing information fetched
by the Xen pCPU subsystem, extending it to also store the ACPI ID.
This ensures that _PDC method gets evaluated for all physically online
CPUs, regardless of the number of CPUs made available to dom0.
Fixes: 5d554a7bb064 ("ACPI: processor: add internal processor_physically_present()")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Fri Apr 28 15:23:50 2023 +0200
ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530
commit 3db66620ea90b0fd4134b31eabfec16d7b07d7e3 upstream.
Remove the acpi_backlight=video quirk for Lenovo ThinkPad W530.
This was intended to help users of the (unsupported) Nvidia binary driver,
but this has been reported to cause backlight control issues for users
who have the gfx configured in hybrid (dual-GPU) mode, so drop this.
The Nvidia binary driver should call acpi_video_register_backlight()
when necessary and this has been reported to Nvidia.
Until this is fixed Nvidia binary driver users can work around this by
passing "acpi_backlight=video" on the kernel commandline (with the latest
6.1.y or newer stable series, kernels < 6.1.y don't need this).
Fixes: a5b2781dcab2 ("ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530")
Reported-by: Русев Путин <rockeraliexpress@gmail.com>
Link: https://lore.kernel.org/linux-acpi/CAK4BXn0ngZRmzx1bodAF8nmYj0PWdUXzPGHofRrsyZj8MBpcVA@mail.gmail.com/
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jean-Philippe Brucker <jean-philippe@linaro.org>
Date: Mon Mar 20 18:05:29 2023 +0000
ACPI: VIOT: Initialize the correct IOMMU fwspec
[ Upstream commit 47d26684185d09e083669bbbd0c465ab3493a51f ]
When setting up DMA for a PCI device, we need to initialize its
iommu_fwspec with all possible alias RIDs (such as PCI bridges). To do
this we use pci_for_each_dma_alias() which calls
viot_pci_dev_iommu_init(). This function incorrectly initializes the
fwspec of the bridge instead of the device being configured. Fix it by
passing the original device as context to pci_for_each_dma_alias().
Fixes: 3cf485540e7b ("ACPI: Add driver for the VIOT table")
Link: https://lore.kernel.org/all/Y8qzOKm6kvhGWG1T@myrica
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marc Dionne <marc.dionne@auristor.com>
Date: Fri Dec 2 10:19:42 2022 -0400
afs: Avoid endless loop if file is larger than expected
[ Upstream commit 9ea4eff4b6f4f36546d537a74da44fd3f30903ab ]
afs_read_dir fetches an amount of data that's based on what the inode
size is thought to be. If the file on the server is larger than what
was fetched, the code rechecks i_size and retries. If the local i_size
was not properly updated, this can lead to an endless loop of fetching
i_size from the server and noticing each time that the size is larger on
the server.
If it is known that the remote size is larger than i_size, bump up the
fetch size to that size.
Fixes: f3ddee8dc4e2 ("afs: Fix directory handling")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Howells <dhowells@redhat.com>
Date: Tue Dec 6 13:49:42 2022 +0000
afs: Fix getattr to report server i_size on dirs, not local size
[ Upstream commit 45f66fa03ba9943cca5af88d691399332b8bde08 ]
Fix afs_getattr() to report the server's idea of the file size of a
directory rather than the local size. The local size may differ as we edit
the local copy to avoid having to redownload it and we may end up with a
differently structured blob of a different size.
However, if the directory is discarded from the pagecache we then download
it again and the user may see the directory file size apparently change.
Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marc Dionne <marc.dionne@auristor.com>
Date: Fri Dec 2 10:07:01 2022 -0400
afs: Fix updating of i_size with dv jump from server
[ Upstream commit d7f74e9a917503ee78f2b603a456d7227cf38919 ]
If the data version returned from the server is larger than expected,
the local data is invalidated, but we may still want to note the remote
file size.
Since we're setting change_size, we have to also set data_changed
for the i_size to get updated.
Fixes: 3f4aa9818163 ("afs: Fix EOF corruption")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Asselstine <asselsm@gmail.com>
Date: Mon May 1 19:13:46 2023 -0400
ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41
commit 7e2d06628aab6324e1ac885910a52f4c038d4043 upstream.
This Asus Zenbook laptop uses Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.
Signed-off-by: Mark Asselstine <asselsm@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230501231346.54979-1-asselsm@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Date: Thu Apr 27 12:04:52 2023 +0100
ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6
commit 067eb084592819ad59d07afcb5de3e61cee2757c upstream.
Lenovo ThinkPad P1 Gen 6 laptop has 2 CS35L41 amplifies
on I2C bus connected to Realtek codec.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230427110452.13787-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kai-Heng Feng <kai.heng.feng@canonical.com>
Date: Fri May 5 14:59:23 2023 +0200
ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop
commit 56fc217f0db4fc78e02a1b8450df06389474a5e5 upstream.
There's another laptop that needs the fixup to enable mute and micmute
LEDs. So do it accordingly.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230505125925.543601-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Caleb Harper <calebharp2005@gmail.com>
Date: Wed May 3 12:50:26 2023 -0500
ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED
commit e7477cb97607b373d175a759c8c0270a640ab3f2 upstream.
This patch adds support for the mute LED on the HP Pavilion Aero Laptop
13-be0xxx. The current behavior is that the LED does not turn on at any
time and does not indicate to the user whether the sound is muted.
The solution is to add a PCI quirk to properly recognize and support the
LED on this device.
This change has been tested on the device in question using modified
versions of kernels 6.0.7-6.2.12 on Arch Linux.
Signed-off-by: Caleb Harper <calebharp2005@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230503175026.6796-1-calebharp2005@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Geraldo Nascimento <geraldogabriel@gmail.com>
Date: Wed May 3 18:02:06 2023 -0300
ALSA: usb-audio: Add quirk for Pioneer DDJ-800
commit 7501f472977df233d039d86c6981e0641708e1ca upstream.
One more Pioneer quirk, this time for DDJ-800, which is quite similar like
other DJ DDJ models but with slightly different EPs or channels.
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Tested-by: Grégory Desor <gregory.desor@free.fr>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ZFLLzgEcsSF5aIHG@geday
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ard Biesheuvel <ardb@kernel.org>
Date: Mon Jan 9 18:47:59 2023 +0100
arm64: Always load shadow stack pointer directly from the task struct
commit 2198d07c509f1db4a1185d1f65aaada794c6ea59 upstream.
All occurrences of the scs_load macro load the value of the shadow call
stack pointer from the task which is current at that point. So instead
of taking a task struct register argument in the scs_load macro to
specify the task struct to load from, let's always reference the current
task directly. This should make it much harder to exploit any
instruction sequences reloading the shadow call stack pointer register
from memory.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230109174800.3286265-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Janne Grunau <j@jannau.net>
Date: Tue Feb 14 15:07:22 2023 +0100
arm64: dts: apple: t8103: Disable unused PCIe ports
[ Upstream commit a0189fdfb73dac856b8fa9b9f9581e5099c9391f ]
The PCIe ports are unused (without devices) so disable them instead of
removing them.
Fixes: 7c77ab91b33d ("arm64: dts: apple: Add missing M1 (t8103) devices")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafał Miłecki <rafal@milecki.pl>
Date: Tue Feb 28 15:43:59 2023 +0100
arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames
[ Upstream commit 23be9f68f933adee8163b8efc9c6bff71410cc7c ]
This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dtb: leds@800: 'led-lan@19', 'led-power@11', 'led-wan-red@12', 'led-wan-white@15', 'led-wps@14' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-2-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafał Miłecki <rafal@milecki.pl>
Date: Tue Feb 28 15:43:58 2023 +0100
arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt name
[ Upstream commit 5cca02449490e767289bda38db1577e2c375c084 ]
This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: interrupt-names:0: 'nand_ctlrdy' was expected
From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-1-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafał Miłecki <rafal@milecki.pl>
Date: Tue Feb 28 15:44:00 2023 +0100
arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename
[ Upstream commit f16a8294dd7a02c7ad042cd2e3acc5ea06698dc1 ]
This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: syscon@280000: $nodename:0: 'syscon@280000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
From schema: schemas/simple-bus.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-3-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Wed Mar 1 10:55:15 2023 +0100
arm64: dts: mediatek: mt8192-asurada: Fix voltage constraint for Vgpu
[ Upstream commit ff4c868ba8df9dcd144ab4943a50adca1cf33ba2 ]
The MT8192 SoC specifies a maximum voltage for the GPU's digital supply
of 0.88V and the GPU OPPs are declaring a maximum voltage of 0.80V.
In order to keep the GPU voltage in the safe range, change the maximum
voltage for mt6315@7's vbuck1 to 0.80V as sending, for any mistake,
1.193V would be catastrophic.
Fixes: 3183cb62b033 ("arm64: dts: mediatek: asurada: Add SPMI regulators")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230301095523.428461-12-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Mar 12 19:36:22 2023 +0100
arm64: dts: qcom: apq8096-db820c: drop unit address from PMI8994 regulator
[ Upstream commit ec57cbce1a6d9384f8ac1ff966b204dc262f4927 ]
The PMIC regulators are not supposed to have unit addresses.
Fixes: 2317b87a2a6f ("arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Mon Jan 2 10:46:29 2023 +0100
arm64: dts: qcom: ipq6018: Add/remove some newlines
[ Upstream commit 6db9ed9a128cbae1423d043f3debd8bfa77783fd ]
Some lines were broken very aggresively, presumably to fit under 80 chars
and some places could have used a newline, particularly between subsequent
nodes. Address all that and remove redundant comments near PCIe ranges
while at it so as not to exceed 100 chars needlessly.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-5-konrad.dybcio@linaro.org
Stable-dep-of: 75a6e1fdb351 ("arm64: dts: qcom: ipq6018: Fix the PCI I/O port range")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Tue Feb 28 22:17:42 2023 +0530
arm64: dts: qcom: ipq6018: Fix the PCI I/O port range
[ Upstream commit 75a6e1fdb351189f55097741e8460ca3f9b2883f ]
For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI address
(0x20200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 095bbdd9a5c3 ("arm64: dts: qcom: ipq6018: Add pcie support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Tue Feb 28 22:17:41 2023 +0530
arm64: dts: qcom: ipq8074: Fix the PCI I/O port range
[ Upstream commit e49eafefe5ab325e38dd074f2005076ffc271e54 ]
For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses
(0x10200000, 0x20200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses and align
them in a single line.
Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adam Skladowski <a39.skl@gmail.com>
Date: Thu Mar 2 13:30:49 2023 +0100
arm64: dts: qcom: msm8976: Add and provide xo clk to rpmcc
[ Upstream commit 4a2c9b9e1215c557c17a48e3fabe9b1674c1d608 ]
In order for consumers of RPMCC XO clock to probe successfully
their parent needs to be feed with reference clock to obtain proper rate,
add fixed xo-board clock and supply it to rpmcc to make consumers happy.
Frequency setting is left per board basis just like on other recent trees.
Fixes: 0484d3ce0902 ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs")
Fixes: ff7f6d34ca07 ("arm64: dts: qcom: Add support for SONY Xperia X/X Compact")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[bjorn: Squashed the two patches]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302123051.12440-1-a39.skl@gmail.com
Link: https://lore.kernel.org/r/20230302123051.12440-2-a39.skl@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Petr Vorel <pvorel@suse.cz>
Date: Tue Jan 31 21:04:13 2023 +0100
arm64: dts: qcom: msm8994-angler: Fix cont_splash_mem mapping
[ Upstream commit fe88480a6be92ecbf6f205ff3a7d7e5ded0562dd ]
Angler's cont_splash_mem mapping is shorter in downstream [1],
therefore 380cd3a34b7f was wrong. Obviously also 0e5ded926f2a was wrong
(workaround which fixed booting at the time).
This fixes error:
[ 0.000000] memory@3401000 (0x0000000003401000--0x0000000005601000) overlaps with tzapp@4800000 (0x0000000004800000--0x0000000006100000)
[1] https://android.googlesource.com/kernel/msm/+/refs/heads/android-msm-angler-3.10-marshmallow-mr1/arch/arm64/boot/dts/huawei/huawei_msm8994_angler_row_vn1/huawei-fingerprint.dtsi#16
Fixes: 380cd3a34b7f ("arm64: dts: msm8994-angler: fix the memory map")
Fixes: 0e5ded926f2a ("arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem")
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230131200414.24373-2-pvorel@suse.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Petr Vorel <pvorel@suse.cz>
Date: Tue Jan 31 21:04:14 2023 +0100
arm64: dts: qcom: msm8994-angler: removed clash with smem_region
[ Upstream commit c85c8a992794dfcd7cea7a41871710c27c5592a6 ]
This fixes memory overlap error:
[ 0.000000] reserved@6300000 (0x0000000006300000--0x0000000007000000) overlaps with smem_region@6a00000 (0x0000000006a00000--0x0000000006c00000)
smem_region is the same as in downstream (qcom,smem) [1], therefore
split reserved memory into two sections on either side of smem_region.
Not adding labels as it's not expected to be used.
[1] https://android.googlesource.com/kernel/msm/+/refs/heads/android-msm-angler-3.10-marshmallow-mr1/arch/arm/boot/dts/qcom/msm8994.dtsi#948
Fixes: 380cd3a34b7f ("arm64: dts: msm8994-angler: fix the memory map")
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230131200414.24373-3-pvorel@suse.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Mar 12 19:36:20 2023 +0100
arm64: dts: qcom: msm8994-kitakami: drop unit address from PMI8994 regulator
[ Upstream commit 3555dd528ba9c08d6ccd56239c695dbeac3b63e3 ]
The PMIC regulators are not supposed to have unit addresses.
Fixes: e9783584c9b7 ("arm64: dts: qcom: msm8994-kitakami: Add VDD_GFX regulator")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Mar 12 19:36:21 2023 +0100
arm64: dts: qcom: msm8994-msft-lumia-octagon: drop unit address from PMI8994 regulator
[ Upstream commit 7a202df0f3eed006e4a9e7c06d62cf67be56c14c ]
The PMIC regulators are not supposed to have unit addresses.
Fixes: 60b214effb80 ("arm64: dts: qcom: msm8994-octagon: Configure regulators")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Tue Feb 28 22:17:43 2023 +0530
arm64: dts: qcom: msm8996: Fix the PCI I/O port range
[ Upstream commit cf0ac10feb17661987d0018eb9475dc03e2a2253 ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x0c200000, 0x0d200000, 0x0e200000) specified in the ranges property for
I/O region.
While at it, let's also align the entries.
Fixes: ed965ef89227 ("arm64: dts: qcom: msm8996: add support to pcie")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Mar 12 19:36:19 2023 +0100
arm64: dts: qcom: msm8998-oneplus-cheeseburger: revert "fix backlight pin function"
[ Upstream commit 97b4fdc6b82d6d5cfb92a9b164540278720fb700 ]
This reverts commit 46546f28825cf3a5ef6873b9cf947cd85c8a7258 because it
mistakenly took PMIC pinctrl/GPIO as TLMM. The TLMM pinctrl uses "gpio"
function, but PMIC uses "normal", so original code was correct:
msm8998-oneplus-cheeseburger.dtb: pmic@2: gpio@c000:button-backlight-state: 'oneOf' conditional failed, one must be fixed:
'gpio' is not one of ['normal', 'paired', 'func1', 'func2', 'dtest1', 'dtest2', 'dtest3', 'dtest4', 'func3', 'func4']
Fixes: 46546f28825c ("arm64: dts: qcom: msm8998-oneplus-cheeseburger: fix backlight pin function")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Mon Feb 13 22:03:31 2023 +0100
arm64: dts: qcom: msm8998: Fix stm-stimulus-base reg name
[ Upstream commit b5d08f08377218b1d2ab4026e427a7788b271c8e ]
The name stm-data-base comes from ancient (msm-3.10 or older)
downstream kernels. Upstream uses stm-stimulus-base instead. Fix it.
Fixes: 783abfa2249a ("arm64: dts: qcom: msm8998: Add Coresight support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213210331.2106877-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Tue Feb 28 22:17:38 2023 +0530
arm64: dts: qcom: msm8998: Fix the PCI I/O port range
[ Upstream commit c30a27dcfe4545edbda1578b3a63ed6147519cdd ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address
(0x1b200000) specified in the ranges property for I/O region.
Fixes: b84dfd175c09 ("arm64: dts: qcom: msm8998: Add PCIe PHY and RC nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Mar 12 19:36:17 2023 +0100
arm64: dts: qcom: sc7180-trogdor-lazor: correct trackpad supply
[ Upstream commit 52e2996f253d82520011340d40dbc1c76ea79208 ]
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other
boards which use elan,ekth3000 with valid VCC:
sc7180-trogdor-lazor-limozeen-nots-r4.dtb: trackpad@2c: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: 2c26adb8dbab ("arm64: dts: qcom: Add sc7180-lazor-limozeen skus")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Mar 12 19:36:18 2023 +0100
arm64: dts: qcom: sc7180-trogdor-pazquel: correct trackpad supply
[ Upstream commit 24f39eec6a70768e7c2eb2f3d8158f45050ff75a ]
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other
boards which use elan,ekth3000 with valid VCC:
sc7180-trogdor-pazquel360-lte.dtb: trackpad@15: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: fb69f6adaf88 ("arm64: dts: qcom: sc7180: Add pazquel dts files")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Mar 12 19:36:16 2023 +0100
arm64: dts: qcom: sc7280-herobrine-villager: correct trackpad supply
[ Upstream commit de88b1759b35086d5e63736fb604ea2d06486b1a ]
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other
Herobrine boards which use elan,ekth3000 with valid VCC:
sc7280-herobrine-villager-r1-lte.dtb: trackpad@2c: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: ee2a62116015 ("arm64: dts: qcom: sc7280: Add device tree for herobrine villager")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Wed Mar 8 13:59:05 2023 +0100
arm64: dts: qcom: sc7280: fix EUD port properties
[ Upstream commit a369c74243ca4ad60b9de0ac5c2207fb4c4117b8 ]
Nodes with unit addresses must have also 'reg' property:
sc7280-herobrine-crd.dtb: eud@88e0000: ports:port@0: 'reg' is a required property
Fixes: 0b059979090d ("arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Tue Feb 28 22:17:39 2023 +0530
arm64: dts: qcom: sc7280: Fix the PCI I/O port range
[ Upstream commit 1d4743d6312582978966d38908b69085621b7693 ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address
(0x40200000) specified in the ranges property for I/O region.
Fixes: 92e0ee9f83b3 ("arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Tue Feb 28 22:17:46 2023 +0530
arm64: dts: qcom: sc8280xp: Fix the PCI I/O port range
[ Upstream commit 89fe81c01715f81c3a7d371e9e5f7d7ae5bc557c ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x30200000, 0x32200000, 0x34200000, 0x38200000, 0x3c200000) specified in
the ranges property for I/O region.
Fixes: 813e83157001 ("arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vincent Guittot <vincent.guittot@linaro.org>
Date: Fri Jan 6 17:46:18 2023 +0100
arm64: dts: qcom: sdm845: correct dynamic power coefficients
[ Upstream commit 44750f153699b6e4f851a399287e5c8df208d696 ]
While stressing EAS on my dragonboard RB3, I have noticed that LITTLE cores
where never selected as the most energy efficient CPU whatever the
utilization level of waking task.
energy model framework uses its cost field to estimate the energy with
the formula:
nrg = cost of the selected OPP * utilization / CPU's max capacity
which ends up selecting the CPU with lowest cost / max capacity ration
as long as the utilization fits in the OPP's capacity.
If we compare the cost of a little OPP with similar capacity of a big OPP
like :
OPP(kHz) OPP capacity cost max capacity cost/max capacity
LITTLE 1766400 407 351114 407 863
big 1056000 408 520267 1024 508
This can be interpreted as the LITTLE core consumes 70% more than big core
for the same compute capacity.
According to [1], LITTLE consumes 10% less than big core for Coremark
benchmark at those OPPs. If we consider that everything else stays
unchanged, the dynamic-power-coefficient of LITTLE core should be
only 53% of the current value: 290 * 53% = 154
Set the dynamic-power-coefficient of CPU0-3 to 154 to fix the energy model.
[1] https://github.com/kdrag0n/freqbench/tree/master/results/sdm845/main
Fixes: 0e0a8e35d725 ("arm64: dts: qcom: sdm845: correct dynamic power coefficients")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106164618.1845281-1-vincent.guittot@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Tue Feb 28 22:17:37 2023 +0530
arm64: dts: qcom: sdm845: Fix the PCI I/O port range
[ Upstream commit 67aa109eee654c76dcc100554e637fa64d5aa099 ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 42ad231338c1 ("arm64: dts: qcom: sdm845: Add second PCIe PHY and controller")
Fixes: 5c538e09cb19 ("arm64: dts: qcom: sdm845: Add first PCIe controller and PHY")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Tue Feb 28 22:17:47 2023 +0530
arm64: dts: qcom: sm8150: Fix the PCI I/O port range
[ Upstream commit 422b110b9b0af0afd4a4b19e8fc3ceab9e71d842 ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: a1c86c680533 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Tue Feb 28 22:17:44 2023 +0530
arm64: dts: qcom: sm8250: Fix the PCI I/O port range
[ Upstream commit e115a4495db687898b8d91d4f16c2cf55bbf167c ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000, 0x64200000) specified in the ranges property for
I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sat Mar 4 14:03:15 2023 +0100
arm64: dts: qcom: sm8350-microsoft-surface: fix USB dual-role mode property
[ Upstream commit 0beda02e530f8fc571877939645cb20ade113027 ]
The "dr_mode" is a property of USB DWC3 node, not the Qualcomm wrapper
one:
sm8350-microsoft-surface-duo2.dtb: usb@a6f8800: 'dr_mode' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+'
Fixes: c16160cfa565 ("arm64: dts: qcom: add minimal DTS for Microsoft Surface Duo 2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304130315.51595-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Neil Armstrong <neil.armstrong@linaro.org>
Date: Fri Mar 24 10:28:49 2023 +0100
arm64: dts: qcom: sm8450: fix pcie1 gpios properties name
[ Upstream commit e57430d2483506f046e39bf8c61159dde88aede2 ]
Add the final "s" to the pgio properties and fix the invalid "enable"
name to the correct "wake", checked against the HDK8450 schematics.
Fixes: bc6588bc25fb ("arm64: dts: qcom: sm8450: add PCIe1 root device")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-4-0ca1bea1a843@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Tue Feb 28 22:17:48 2023 +0530
arm64: dts: qcom: sm8450: Fix the PCI I/O port range
[ Upstream commit f57903c8f4c77938eb71fc67e4652264a9fa14f9 ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: bc6588bc25fb ("arm64: dts: qcom: sm8450: add PCIe1 root device")
Fixes: 7b09b1b47335 ("arm64: dts: qcom: sm8450: add PCIe0 RC device")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Thu Feb 16 16:30:32 2023 +0100
arm64: dts: renesas: r8a774c0: Remove bogus voltages from OPP table
[ Upstream commit 554edc3e9239bb81e61be9f0f5dbbeb528a69e72 ]
According to the RZ/G Series, 2nd Generation Hardware User’s Manual
Rev. 1.11, the System CPU cores on RZ/G2E do not have their own power
supply, but use the common internal power supply (typical 1.03V).
Hence remove the "opp-microvolt" properties from the Operating
Performance Points table. They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.
Fixes: 231d8908a66fa98f ("arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8348e18a011ded94e35919cd8e17c0be1f9acf2f.1676560856.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Thu Feb 16 16:30:31 2023 +0100
arm64: dts: renesas: r8a77990: Remove bogus voltages from OPP table
[ Upstream commit fb76b0fae3ca880363214e1dcd6513ab8bd529e7 ]
According to the R-Car Series, 3rd Generation Hardware User’s Manual
Rev. 2.30, the System CPU cores on R-Car E3 do not have their own power
supply, but use the common internal power supply (typical 1.03V).
Hence remove the "opp-microvolt" properties from the Operating
Performance Points table. They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.
Fixes: dd7188eb4ed128dc ("arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9232578d9d395d529f64db3333a371e31327f459.1676560856.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Fri Feb 17 18:52:25 2023 +0000
arm64: dts: renesas: r9a07g043: Update IRQ numbers for SSI channels
[ Upstream commit 2a5c9891392dca47f6865a2add1986876e40849c ]
From R01UH0968EJ0100 Rev.1.00 HW manual the interrupt numbers for SSI
channels have been updated,
SPI 329 - SSIF0 is now marked as reserved
SPI 333 - SSIF1 is now marked as reserved
SPI 335 - SSIF2 is now marked as reserved
SPI 336 - SSIF2 is now marked as reserved
SPI 341 - SSIF3 is now marked as reserved
This patch drops the above IRQs from SoC DTSI.
Fixes: 559f2b0708c70 ("arm64: dts: renesas: r9a07g043: Add SSI{1,2,3} nodes and fillup the SSI0 stub node")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230217185225.43310-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Fri Feb 17 18:52:24 2023 +0000
arm64: dts: renesas: r9a07g044: Update IRQ numbers for SSI channels
[ Upstream commit 5da750ddd96454757a3b467e968e3fb70bb12bc8 ]
From R01UH0914EJ0120 Rev.1.20 HW manual the interrupt numbers for SSI
channels have been updated,
SPI 329 - SSIF0 is now marked as reserved
SPI 333 - SSIF1 is now marked as reserved
SPI 335 - SSIF2 is now marked as reserved
SPI 336 - SSIF2 is now marked as reserved
SPI 341 - SSIF3 is now marked as reserved
This patch drops the above IRQs from SoC DTSI.
Fixes: 92a341315afc9 ("arm64: dts: renesas: r9a07g044: Add SSI support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230217185225.43310-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Fri Feb 17 18:52:24 2023 +0000
arm64: dts: renesas: r9a07g054: Update IRQ numbers for SSI channels
[ Upstream commit c2b0dc0e83ef4a74cbe381fd0c84cea16cf067f0 ]
From R01UH0936EJ0120 Rev.1.20 HW manual the interrupt numbers for SSI
channels have been updated,
SPI 329 - SSIF0 is now marked as reserved
SPI 333 - SSIF1 is now marked as reserved
SPI 335 - SSIF2 is now marked as reserved
SPI 336 - SSIF2 is now marked as reserved
SPI 341 - SSIF3 is now marked as reserved
This patch drops the above IRQs from SoC DTSI.
Fixes: cd0339ec25895c0b ("arm64: dts: renesas: r9a07g054: Add SSI{1,2,3} nodes and fillup the SSI0 stub node")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230217185225.43310-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Douglas Anderson <dianders@chromium.org>
Date: Thu Mar 23 10:30:05 2023 -0700
arm64: dts: sc7180: Rename qspi data12 as data23
[ Upstream commit d84f8f2687bdc67f20262e822b206419bcfd0038 ]
There are 4 qspi data pins: data0, data1, data2, and data3. Currently
we have a shared pin state for data0 and data1 (2 lane config) and a
pin state for data2 and data3 (you'd enable both this and the 2 lane
state for 4 lanes). The second state is obviously misnamed. Fix it.
Fixes: ba3fc6496366 ("arm64: dts: sc7180: Add qupv3_0 and qupv3_1")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323102605.1.Ifc1b5be04653f4ab119698a5944bfecded2080d6@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Douglas Anderson <dianders@chromium.org>
Date: Thu Mar 23 10:30:06 2023 -0700
arm64: dts: sc7280: Rename qspi data12 as data23
[ Upstream commit 14acf21c0d3f7b7298ffcd2e5b5db4a476ec6202 ]
There are 4 qspi data pins: data0, data1, data2, and data3. Currently
we have a shared pin state for data0 and data1 (2 lane config) and a
pin state for data2 and data3 (you'd enable both this and the 2 lane
state for 4 lanes). The second state is obviously misnamed. Fix it.
Fixes: 7720ea001b52 ("arm64: dts: qcom: sc7280: Add QSPI node")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323102605.2.I4043491bb24b1e92267c5033d76cdb0fe60934da@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Douglas Anderson <dianders@chromium.org>
Date: Thu Mar 23 10:30:07 2023 -0700
arm64: dts: sdm845: Rename qspi data12 as data23
[ Upstream commit 37f7349b56decc91c66f8039712e63740b1f25f9 ]
There are 4 qspi data pins: data0, data1, data2, and data3. Currently
we have a shared pin state for data0 and data1 (2 lane config) and a
pin state for data2 and data3 (you'd enable both this and the 2 lane
state for 4 lanes). The second state is obviously misnamed. Fix it.
Fixes: e1ce853932b7 ("arm64: dts: qcom: sdm845: Add qspi (quad SPI) node")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323102605.3.I88528d037b7fda4e53a40f661be5ac61628691cd@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nitin Yadav <n-yadav@ti.com>
Date: Thu Feb 2 14:29:17 2023 +0530
arm64: dts: ti: k3-am62-main: Fix GPIO numbers in DT
[ Upstream commit 28c8f2189d80c8b37068c367e9864b5aa530f208 ]
Fix number of gpio pins in main_gpio0 & main_gpio1
DT nodes according to AM62x SK datasheet. The Link
of datasheet is in the following line:
https://www.ti.com/lit/ds/symlink/am625.pdf?ts=1673852494660
Section: 6.3.10 GPIO (Page No. 63-67)
Fixes: f1d17330a5be ("arm64: dts: ti: Introduce base support for AM62x SoC")
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230202085917.3044567-1-n-yadav@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vignesh Raghavendra <vigneshr@ti.com>
Date: Mon Mar 20 10:19:34 2023 +0530
arm64: dts: ti: k3-am625: Correct L2 cache size to 512KB
[ Upstream commit 6974371cab1c488a53960945cb139b20ebb5f16b ]
Per AM62x SoC datasheet[0] L2 cache is 512KB.
[0] https://www.ti.com/lit/gpn/am625 Page 1.
Fixes: f1d17330a5be ("arm64: dts: ti: Introduce base support for AM62x SoC")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230320044935.2512288-1-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Devarsh Thakkar <devarsht@ti.com>
Date: Tue Mar 14 15:16:45 2023 +0530
arm64: dts: ti: k3-am62a7-sk: Fix DDR size to full 4GB
[ Upstream commit a1bc0d6084dba8a31831c65318a8a8e46f00906f ]
All revisions of AM62A7-SK board have 4GB LPDDR4 Micron
MT53E2G32D4DE-046 AUT:B memory. Commit 38c4a08c820c ("arm64: dts: ti:
Add support for AM62A7-SK") enabled just 2GB due to a schematics error
in early revision of the board. Fix it by enabling full 4GB available on
the platform.
Design docs: https://www.ti.com/lit/zip/sprr459
Fixes: 38c4a08c820c ("arm64: dts: ti: Add support for AM62A7-SK")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230314094645.3411599-1-devarsht@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vignesh Raghavendra <vigneshr@ti.com>
Date: Mon Mar 20 10:19:35 2023 +0530
arm64: dts: ti: k3-am62a7: Correct L2 cache size to 512KB
[ Upstream commit 438b8dc949bf45979c32553e96086ff1c6e2504e ]
Per AM62Ax SoC datasheet[0] L2 cache is 512KB.
[0] https://www.ti.com/lit/gpn/am62a7 Page 1.
Fixes: 5fc6b1b62639 ("arm64: dts: ti: Introduce AM62A7 family of SoCs")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230320044935.2512288-2-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bhavya Kapoor <b-kapoor@ti.com>
Date: Fri Feb 3 13:07:24 2023 +0530
arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property
[ Upstream commit 4f4b30a777d3e61603119297965343a37be36435 ]
According to latest errata of J721e [1], (i2024) 'MMCSD: Peripherals
Do Not Support HS400' which applies to MMCSD0 subsystem. Speed modes
supported has been already updated but missed dropping 'ti,strobe-sel'
property which is only required by HS400 speed mode.
Thus, drop 'ti,strobe-sel' property from kernel dtsi for J721e SoC.
[1] https://www.ti.com/lit/er/sprz455/sprz455.pdf
Fixes: eb8f6194e807 ("arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Diwakar Dhyani <d-dhyani@ti.com>
Reviewed-by: Nitin Yadav <n-yadav@ti.com>
Link: https://lore.kernel.org/r/20230203073724.29529-1-b-kapoor@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sumit Garg <sumit.garg@linaro.org>
Date: Thu Feb 2 13:01:48 2023 +0530
arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step
[ Upstream commit af6c0bd59f4f3ad5daad2f7b777954b1954551d5 ]
Currently only the first attempt to single-step has any effect. After
that all further stepping remains "stuck" at the same program counter
value.
Refer to the ARM Architecture Reference Manual (ARM DDI 0487E.a) D2.12,
PSTATE.SS=1 should be set at each step before transferring the PE to the
'Active-not-pending' state. The problem here is PSTATE.SS=1 is not set
since the second single-step.
After the first single-step, the PE transferes to the 'Inactive' state,
with PSTATE.SS=0 and MDSCR.SS=1, thus PSTATE.SS won't be set to 1 due to
kernel_active_single_step()=true. Then the PE transferes to the
'Active-pending' state when ERET and returns to the debugger by step
exception.
Before this patch:
==================
Entering kdb (current=0xffff3376039f0000, pid 1) on processor 0 due to Keyboard Entry
[0]kdb>
[0]kdb>
[0]kdb> bp write_sysrq_trigger
Instruction(i) BP #0 at 0xffffa45c13d09290 (write_sysrq_trigger)
is enabled addr at ffffa45c13d09290, hardtype=0 installed=0
[0]kdb> go
$ echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to Breakpoint @ 0xffffad651a309290
[1]kdb> ss
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
[1]kdb> ss
Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294
[1]kdb>
After this patch:
=================
Entering kdb (current=0xffff6851c39f0000, pid 1) on processor 0 due to Keyboard Entry
[0]kdb> bp write_sysrq_trigger
Instruction(i) BP #0 at 0xffffc02d2dd09290 (write_sysrq_trigger)
is enabled addr at ffffc02d2dd09290, hardtype=0 installed=0
[0]kdb> go
$ echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to Breakpoint @ 0xffffc02d2dd09290
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09294
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09298
[1]kdb> ss
Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd0929c
[1]kdb>
Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support")
Co-developed-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230202073148.657746-3-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ard Biesheuvel <ardb@kernel.org>
Date: Mon Jan 9 18:48:00 2023 +0100
arm64: Stash shadow stack pointer in the task struct on interrupt
commit 59b37fe52f49955791a460752c37145f1afdcad1 upstream.
Instead of reloading the shadow call stack pointer from the ordinary
stack, which may be vulnerable to the kind of gadget based attacks
shadow call stacks were designed to prevent, let's store a task's shadow
call stack pointer in the task struct when switching to the shadow IRQ
stack.
Given that currently, the task_struct::scs_sp field is only used to
preserve the shadow call stack pointer while a task is scheduled out or
running in user space, reusing this field to preserve and restore it
while running off the IRQ stack must be safe, as those occurrences are
guaranteed to never overlap. (The stack switching logic only switches
stacks when running from the task stack, and so the value being saved
here always corresponds to the task mode shadow stack)
While at it, fold a mov/add/mov sequence into a single add.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230109174800.3286265-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: H. Nikolaus Schaller <hns@goldelico.com>
Date: Fri Jan 13 22:11:51 2023 +0100
ARM: dts: gta04: fix excess dma channel usage
[ Upstream commit a622310f7f0185da02e42cdb06475f533efaae60 ]
OMAP processors support 32 channels but there is no check or
inspect this except booting a device and looking at dmesg reports
of not available channels.
Recently some more subsystems with DMA (aes1+2) were added filling
the list of dma channels beyond the limit of 32 (even if other
parameters indicate 96 or 128 channels). This leads to random
subsystem failures i(e.g. mcbsp for audio) after boot or boot
messages that DMA can not be initialized.
Another symptom is that
/sys/kernel/debug/dmaengine/summary
has 32 entries and does not show all required channels.
Fix by disabling unused (on the GTA04 hardware) mcspi1...4.
Each SPI channel allocates 4 DMA channels rapidly filling
the available ones.
Disabling unused SPI modules on the OMAP3 SoC may also save
some energy (has not been checked).
Fixes: c312f066314e ("ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
[re-enabled aes2, improved commit subject line]
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-Id: <20230113211151.2314874-1-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Mon Feb 20 13:08:31 2023 +0100
ARM: dts: qcom-apq8064: Fix opp table child name
[ Upstream commit b9745c275246a7e43c34d1b3be5ff9a9f3cf9305 ]
The opp-320000000 name is rather misleading with the opp-hz value
of 450 MHz. Fix it!
Fixes: 8db0b6c7b636 ("ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230220120831.1591820-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Tue Feb 28 22:17:51 2023 +0530
ARM: dts: qcom: ipq4019: Fix the PCI I/O port range
[ Upstream commit 2540279e9a9e74fc880d1e4c83754ecfcbe290a0 ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address
(0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 187519403273 ("ARM: dts: ipq4019: Add a few peripheral nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-16-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Tue Feb 28 22:17:52 2023 +0530
ARM: dts: qcom: ipq8064: Fix the PCI I/O port range
[ Upstream commit 0b16b34e491629016109e56747ad64588074194b ]
For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses
(0x0fe00000, 0x31e00000, 0x35e00000) specified in the ranges property for
I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 93241840b664 ("ARM: dts: qcom: Add pcie nodes for ipq8064")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-17-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Wed Mar 8 13:54:16 2023 +0530
ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node
[ Upstream commit 3b76b736cd9933ff88764ffec01cbd859c1475e7 ]
Unit address of PCIe EP node should be 0x1c00000 as it has to match the
first address specified in the reg property.
This also requires sorting the node in the ascending order.
Fixes: e6b69813283f ("ARM: dts: qcom: sdx55: Add support for PCIe EP")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308082424.140224-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexandre Torgue <alexandre.torgue@foss.st.com>
Date: Mon Mar 20 18:03:31 2023 +0100
ARM: dts: stm32: fix spi1 pin assignment on stm32mp15
[ Upstream commit 1b9f0ec81af0012aae30aa3b4c711ad71d42e246 ]
Bank A and B IOs can't be handled by the pin controller 'Z'. This patch
assign spi1 pin definition to the correct controller.
Fixes: 9ad65d245b7b ("ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group")
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Mon Jan 9 15:11:52 2023 +0200
asm-generic/io.h: suppress endianness warnings for readq() and writeq()
[ Upstream commit d564fa1ff19e893e2971d66e5c8f49dc1cdc8ffc ]
Commit c1d55d50139b ("asm-generic/io.h: Fix sparse warnings on
big-endian architectures") missed fixing the 64-bit accessors.
Arnd explains in the attached link why the casts are necessary, even if
__raw_readq() and __raw_writeq() do not take endian-specific types.
Link: https://lore.kernel.org/lkml/9105d6fc-880b-4734-857d-e3d30b87ccf6@app.fastmail.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Mon Jan 9 15:11:53 2023 +0200
asm-generic/io.h: suppress endianness warnings for relaxed accessors
[ Upstream commit 05d3855b4d21ef3c2df26be1cbba9d2c68915fcb ]
Copy the forced type casts from the normal MMIO accessors to suppress
the sparse warnings that point out __raw_readl() returns a native endian
word (just like readl()).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Date: Fri Mar 31 10:50:23 2023 +0530
ASoC: amd: ps: update the acp clock source.
commit a4d432e9132c0b29d857b09ca2ec4c1f455b5948 upstream.
Updating the clock source from ACLK to default clock
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230331052102.2211115-1-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ge-org Brohammer <gbrohammer@outlook.com>
Date: Fri Mar 17 00:38:51 2023 +0200
ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)
[ Upstream commit 205efd4619b860404ebb5882e5a119eb3b3b3716 ]
This model requires an additional detection quirk to
enable the internal microphone.
Tried to use git send-email this time.
Signed-off-by: Ge-org Brohammer <gbrohammer@outlook.com>
Link: https://lore.kernel.org/r/PAVP195MB2261322C220E95D7F4B2732ADABC9@PAVP195MB2261.EURP195.PROD.OUTLOOK.COM
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lucas Tanure <lucas.tanure@collabora.com>
Date: Thu Feb 23 08:43:21 2023 +0000
ASoC: cs35l41: Only disable internal boost
[ Upstream commit 4658de99d43cd740e019e7fd124b4128f8f4027f ]
In error situations, only the internal boost case should be disabled and
re-enabled.
Also, for other boost cases re-enabling the boost to the default internal
boost config is incorrect.
Fixes: 6450ef559056 ("ASoC: cs35l41: CS35L41 Boosted Smart Amplifier")
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Link: https://lore.kernel.org/r/20230223084324.9076-2-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Duy Nguyen <duy.nguyen.rh@renesas.com>
Date: Tue Mar 28 00:03:03 2023 +0000
ASoC: da7213.c: add missing pm_runtime_disable()
[ Upstream commit 44378cd113e5f15bb0a89f5ac5a0e687b52feb90 ]
da7213.c is missing pm_runtime_disable(), thus we will get
below error when rmmod -> insmod.
$ rmmod snd-soc-da7213.ko
$ insmod snd-soc-da7213.ko
da7213 0-001a: Unbalanced pm_runtime_enable!"
[Kuninori adjusted to latest upstream]
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Khanh Le <khanh.le.xr@renesas.com>
Link: https://lore.kernel.org/r/87mt3xg2tk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Thu Mar 30 09:13:33 2023 +0200
ASoC: dt-bindings: qcom,lpass-rx-macro: correct minItems for clocks
commit 59257015ac8813d2430988aa01c2f4609a60e8e7 upstream.
The RX macro codec comes on some platforms in two variants - ADSP
and ADSP bypassed - thus the clock-names varies from 3 to 5. The clocks
must vary as well:
sc7280-idp.dtb: codec@3200000: clocks: [[202, 8], [202, 7], [203]] is too short
Fixes: 852fda58d99a ("ASoC: qcom: dt-bindings: Update bindings for clocks in lpass digital codes")
Cc: <stable@vger.kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230330071333.24308-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Date: Tue Mar 28 12:49:01 2023 +0300
ASoC: es8316: Handle optional IRQ assignment
[ Upstream commit 39db65a0a17b54915b269d3685f253a4731f344c ]
The driver is able to work fine without relying on a mandatory interrupt
being assigned to the I2C device. This is only needed when making use of
the jack-detect support.
However, the following warning message is always emitted when there is
no such interrupt available:
es8316 0-0011: Failed to get IRQ 0: -22
Do not attempt to request an IRQ if it is not available/valid. This also
ensures the rather misleading message is not displayed anymore.
Also note the IRQ validation relies on commit dab472eb931bc291 ("i2c /
ACPI: Use 0 to indicate that device does not have interrupt assigned").
Fixes: 822257661031 ("ASoC: es8316: Add jack-detect support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230328094901.50763-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liliang Ye <yll@hust.edu.cn>
Date: Mon Apr 3 23:26:47 2023 +0800
ASoC: fsl_mqs: move of_node_put() to the correct location
[ Upstream commit 1c34890273a020d61d6127ade3f68ed1cb21c16a ]
of_node_put() should have been done directly after
mqs_priv->regmap = syscon_node_to_regmap(gpr_np);
otherwise it creates a reference leak on the success path.
To fix this, of_node_put() is moved to the correct location, and change
all the gotos to direct returns.
Fixes: a9d273671440 ("ASoC: fsl_mqs: Fix error handling in probe")
Signed-off-by: Liliang Ye <yll@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230403152647.17638-1-yll@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Wed Mar 22 15:53:32 2023 +0100
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750
[ Upstream commit e38c5e80c3d293a883c6f1d553f2146ec0bda35e ]
The Acer Iconia One 7 B1-750 tablet mostly works fine with the defaults
for an Bay Trail CR tablet. Except for the internal mic, instead of
an analog mic on IN3 a digital mic on DMIC1 is uses.
Add a quirk with these settings for this tablet.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230322145332.131525-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eugene Huang <eugene.huang99@gmail.com>
Date: Tue Mar 14 17:05:53 2023 +0800
ASoC: Intel: soc-acpi: add table for Intel 'Rooks County' NUC M15
[ Upstream commit 9c691a42b8926c8966561265cdae3ddc7464d3a2 ]
Same topology as the HP Omen 16-k0005TX, except with the rt1316 amp
on link2.
Link: https://github.com/thesofproject/linux/issues/4088
Signed-off-by: Eugene Huang <eugene.huang99@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314090553.498664-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eugene Huang <eugene.huang99@gmail.com>
Date: Tue Mar 14 17:05:52 2023 +0800
ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15
[ Upstream commit 3c728b1bc5b99c5275ac5c7788ef814c0e51ef54 ]
Same quirks as the 'Bishop County' NUC M15, except the rt711 is in the
'JD2 100K' jack detection mode.
Link: https://github.com/thesofproject/linux/issues/4088
Signed-off-by: Eugene Huang <eugene.huang99@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314090553.498664-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Baluta <daniel.baluta@nxp.com>
Date: Fri Mar 24 14:40:19 2023 +0200
ASoC: soc-compress: Inherit atomicity from DAI link for Compress FE
[ Upstream commit 37b58becc1cee4d591024f2056d7ffa99c6089e0 ]
After commit bbf7d3b1c4f40 ("ASoC: soc-pcm: align BE 'atomicity' with
that of the FE") BE and FE atomicity must match.
In the case of Compress PCM there is a mismatch in atomicity between FE
and BE and we get errors like this:
[ 36.434566] sai1-wm8960-hifi: dpcm_be_connect: FE is atomic but BE
is nonatomic, invalid configuration
[ 36.444278] PCM Deep Buffer: ASoC: can't connect SAI1.OUT
In order to fix this we must inherit the atomicity from DAI link
associated with current PCM Compress FE.
Fixes: bbf7d3b1c4f4 ("ASoC: soc-pcm: align BE 'atomicity' with that of the FE")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230324124019.30826-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shengjiu Wang <shengjiu.wang@nxp.com>
Date: Thu Mar 9 15:13:37 2023 +0800
ASoC: soc-pcm: fix hw->formats cleared by soc_pcm_hw_init() for dpcm
[ Upstream commit 083a25b18d6ad9f1f540e629909aa3eaaaf01823 ]
The hw->formats may be set by snd_dmaengine_pcm_refine_runtime_hwparams()
in component's startup()/open(), but soc_pcm_hw_init() will init
hw->formats in dpcm_runtime_setup_fe() after component's startup()/open(),
which causes the valuable hw->formats to be cleared.
So need to store the hw->formats before initialization, then restore
it after initialization.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1678346017-3660-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Biggers <ebiggers@google.com>
Date: Wed Mar 15 11:39:04 2023 -0700
blk-crypto: make blk_crypto_evict_key() more robust
commit 5c7cb94452901a93e90c2230632e2c12a681bc92 upstream.
If blk_crypto_evict_key() sees that the key is still in-use (due to a
bug) or that ->keyslot_evict failed, it currently just returns while
leaving the key linked into the keyslot management structures.
However, blk_crypto_evict_key() is only called in contexts such as inode
eviction where failure is not an option. So actually the caller
proceeds with freeing the blk_crypto_key regardless of the return value
of blk_crypto_evict_key().
These two assumptions don't match, and the result is that there can be a
use-after-free in blk_crypto_reprogram_all_keys() after one of these
errors occurs. (Note, these errors *shouldn't* happen; we're just
talking about what happens if they do anyway.)
Fix this by making blk_crypto_evict_key() unlink the key from the
keyslot management structures even on failure.
Also improve some comments.
Fixes: 1b2628397058 ("block: Keyslot Manager for Inline Encryption")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Biggers <ebiggers@google.com>
Date: Wed Mar 15 11:39:03 2023 -0700
blk-crypto: make blk_crypto_evict_key() return void
commit 70493a63ba04f754f7a7dd53a4fcc82700181490 upstream.
blk_crypto_evict_key() is only called in contexts such as inode eviction
where failure is not an option. So there is nothing the caller can do
with errors except log them. (dm-table.c does "use" the error code, but
only to pass on to upper layers, so it doesn't really count.)
Just make blk_crypto_evict_key() return void and log errors itself.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Arnd Bergmann <arnd@arndb.de>
Date: Wed Jan 18 09:07:01 2023 +0100
blk-iocost: avoid 64-bit division in ioc_timer_fn
commit 5f2779dfa7b8cc7dfd4a1b6586d86e0d193266f3 upstream.
The behavior of 'enum' types has changed in gcc-13, so now the
UNBUSY_THR_PCT constant is interpreted as a 64-bit number because
it is defined as part of the same enum definition as some other
constants that do not fit within a 32-bit integer. This in turn
leads to some inefficient code on 32-bit architectures as well
as a link error:
arm-linux-gnueabi/bin/arm-linux-gnueabi-ld: block/blk-iocost.o: in function `ioc_timer_fn':
blk-iocost.c:(.text+0x68e8): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: blk-iocost.c:(.text+0x6908): undefined reference to `__aeabi_uldivmod'
Split the enum definition to keep the 64-bit timing constants in
a separate enum type from those constants that can clearly fit
within a smaller type.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230118080706.3303186-1-arnd@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christoph Hellwig <hch@lst.de>
Date: Thu Apr 13 08:40:38 2023 +0200
blk-mq: don't plug for head insertions in blk_execute_rq_nowait
[ Upstream commit 50947d7fe9fa6abe3ddc40769dfb02a51c58edb6 ]
Plugs never insert at head, so don't plug for head insertions.
Fixes: 1c2d2fff6dc0 ("block: wire-up support for passthrough plugging")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Biggers <ebiggers@google.com>
Date: Wed Mar 15 11:39:02 2023 -0700
blk-mq: release crypto keyslot before reporting I/O complete
commit 9cd1e566676bbcb8a126acd921e4e194e6339603 upstream.
Once all I/O using a blk_crypto_key has completed, filesystems can call
blk_crypto_evict_key(). However, the block layer currently doesn't call
blk_crypto_put_keyslot() until the request is being freed, which happens
after upper layers have been told (via bio_endio()) the I/O has
completed. This causes a race condition where blk_crypto_evict_key()
can see 'slot_refs != 0' without there being an actual bug.
This makes __blk_crypto_evict_key() hit the
'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without
doing anything, eventually causing a use-after-free in
blk_crypto_reprogram_all_keys(). (This is a very rare bug and has only
been seen when per-file keys are being used with fscrypt.)
There are two options to fix this: either release the keyslot before
bio_endio() is called on the request's last bio, or make
__blk_crypto_evict_key() ignore slot_refs. Let's go with the first
solution, since it preserves the ability to report bugs (via
WARN_ON_ONCE) where a key is evicted while still in-use.
Fixes: a892c8d52c02 ("block: Inline encryption support for blk-mq")
Cc: stable@vger.kernel.org
Reviewed-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chengming Zhou <zhouchengming@bytedance.com>
Date: Thu Apr 13 14:28:04 2023 +0800
blk-stat: fix QUEUE_FLAG_STATS clear
commit 20de765f6d9da0c47b756429c60b41063b990a10 upstream.
We need to set QUEUE_FLAG_STATS for two cases:
1. blk_stat_enable_accounting()
2. blk_stat_add_callback()
So we should clear it only when ((q->stats->accounting == 0) &&
list_empty(&q->stats->callbacks)).
blk_stat_disable_accounting() only check if q->stats->accounting
is 0 before clear the flag, this patch fix it.
Also add list_empty(&q->stats->callbacks)) check when enable, or
the flag is already set.
The bug can be reproduced on kernel without BLK_DEV_THROTTLING
(since it unconditionally enable accounting, see the next patch).
# cat /sys/block/sr0/queue/scheduler
none mq-deadline [bfq]
# cat /sys/kernel/debug/block/sr0/state
SAME_COMP|IO_STAT|INIT_DONE|STATS|REGISTERED|NOWAIT|30
# echo none > /sys/block/sr0/queue/scheduler
# cat /sys/kernel/debug/block/sr0/state
SAME_COMP|IO_STAT|INIT_DONE|REGISTERED|NOWAIT
# cat /sys/block/sr0/queue/wbt_lat_usec
75000
We can see that after changing elevator from "bfq" to "none",
"STATS" flag is lost even though WBT callback still need it.
Fixes: 68497092bde9 ("block: make queue stat accounting a reference")
Cc: <stable@vger.kernel.org> # v5.17+
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230413062805.2081970-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Xin Liu <liuxin350@huawei.com>
Date: Thu Apr 6 20:26:22 2023 +0800
bpf, sockmap: fix deadlocks in the sockhash and sockmap
[ Upstream commit ed17aa92dc56b6d8883e4b7a8f1c6fbf5ed6cd29 ]
When huang uses sched_switch tracepoint, the tracepoint
does only one thing in the mounted ebpf program, which
deletes the fixed elements in sockhash ([0])
It seems that elements in sockhash are rarely actively
deleted by users or ebpf program. Therefore, we do not
pay much attention to their deletion. Compared with hash
maps, sockhash only provides spin_lock_bh protection.
This causes it to appear to have self-locking behavior
in the interrupt context.
[0]:https://lore.kernel.org/all/CABcoxUayum5oOqFMMqAeWuS8+EzojquSOSyDA3J_2omY=2EeAg@mail.gmail.com/
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230406122622.109978-1-liuxin350@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Borkmann <daniel@iogearbox.net>
Date: Thu Apr 13 20:28:42 2023 +0200
bpf, sockmap: Revert buggy deadlock fix in the sockhash and sockmap
[ Upstream commit 8c5c2a4898e3d6bad86e29d471e023c8a19ba799 ]
syzbot reported a splat and bisected it to recent commit ed17aa92dc56 ("bpf,
sockmap: fix deadlocks in the sockhash and sockmap"):
[...]
WARNING: CPU: 1 PID: 9280 at kernel/softirq.c:376 __local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
Modules linked in:
CPU: 1 PID: 9280 Comm: syz-executor.1 Not tainted 6.2.0-syzkaller-13249-gd319f344561d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
RIP: 0010:__local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
[...]
Call Trace:
<TASK>
spin_unlock_bh include/linux/spinlock.h:395 [inline]
sock_map_del_link+0x2ea/0x510 net/core/sock_map.c:165
sock_map_unref+0xb0/0x1d0 net/core/sock_map.c:184
sock_hash_delete_elem+0x1ec/0x2a0 net/core/sock_map.c:945
map_delete_elem kernel/bpf/syscall.c:1536 [inline]
__sys_bpf+0x2edc/0x53e0 kernel/bpf/syscall.c:5053
__do_sys_bpf kernel/bpf/syscall.c:5166 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5164 [inline]
__x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5164
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fe8f7c8c169
</TASK>
[...]
Revert for now until we have a proper solution.
Fixes: ed17aa92dc56 ("bpf, sockmap: fix deadlocks in the sockhash and sockmap")
Reported-by: syzbot+49f6cef45247ff249498@syzkaller.appspotmail.com
Cc: Hsin-Wei Hung <hsinweih@uci.edu>
Cc: Xin Liu <liuxin350@huawei.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/000000000000f1db9605f939720e@google.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Feng Zhou <zhoufeng.zf@bytedance.com>
Date: Mon Apr 10 16:59:07 2023 +0800
bpf/btf: Fix is_int_ptr()
[ Upstream commit 91f2dc6838c19342f7f2993627c622835cc24890 ]
When tracing a kernel function with arg type is u32*, btf_ctx_access()
would report error: arg2 type INT is not a struct.
The commit bb6728d75611 ("bpf: Allow access to int pointer arguments
in tracing programs") added support for int pointer, but did not skip
modifiers before checking it's type. This patch fixes it.
Fixes: bb6728d75611 ("bpf: Allow access to int pointer arguments in tracing programs")
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230410085908.98493-2-zhoufeng.zf@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Vernet <void@manifault.com>
Date: Wed Feb 1 11:30:13 2023 -0600
bpf: Add __bpf_kfunc tag for marking kernel functions as kfuncs
[ Upstream commit 57e7c169cd6afa093d858b8edfb9bceaf2e1c93b ]
kfuncs are functions defined in the kernel, which may be invoked by BPF
programs. They may or may not also be used as regular kernel functions,
implying that they may be static (in which case the compiler could e.g.
inline it away, or elide one or more arguments), or it could have
external linkage, but potentially be elided in an LTO build if a
function is observed to never be used, and is stripped from the final
kernel binary.
This has already resulted in some issues, such as those discussed in [0]
wherein changes in DWARF that identify when a parameter has been
optimized out can break BTF encodings (and in general break the kfunc).
[0]: https://lore.kernel.org/all/1675088985-20300-2-git-send-email-alan.maguire@oracle.com/
We therefore require some convenience macro that kfunc developers can
use just add to their kfuncs, and which will prevent all of the above
issues from happening. This is in contrast with what we have today,
where some kfunc definitions have "noinline", some have "__used", and
others are static and have neither.
Note that longer term, this mechanism may be replaced by a macro that
more closely resembles EXPORT_SYMBOL_GPL(), as described in [1]. For
now, we're going with this shorter-term approach to fix existing issues
in kfuncs.
[1]: https://lore.kernel.org/lkml/Y9AFT4pTydKh+PD3@maniforge.lan/
Note as well that checkpatch complains about this patch with the
following:
ERROR: Macros with complex values should be enclosed in parentheses
+#define __bpf_kfunc __used noinline
There seems to be a precedent for using this pattern in other places
such as compiler_types.h (see e.g. __randomize_layout and noinstr), so
it seems appropriate.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230201173016.342758-2-void@manifault.com
Stable-dep-of: f6a6a5a97628 ("bpf: Fix struct_meta lookup for bpf_obj_free_fields kfunc call")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Marchevsky <davemarchevsky@fb.com>
Date: Mon Feb 13 16:40:10 2023 -0800
bpf: Add basic bpf_rb_{root,node} support
[ Upstream commit 9c395c1b99bd23f74bc628fa000480c49593d17f ]
This patch adds special BPF_RB_{ROOT,NODE} btf_field_types similar to
BPF_LIST_{HEAD,NODE}, adds the necessary plumbing to detect the new
types, and adds bpf_rb_root_free function for freeing bpf_rb_root in
map_values.
structs bpf_rb_root and bpf_rb_node are opaque types meant to
obscure structs rb_root_cached rb_node, respectively.
btf_struct_access will prevent BPF programs from touching these special
fields automatically now that they're recognized.
btf_check_and_fixup_fields now groups list_head and rb_root together as
"graph root" fields and {list,rb}_node as "graph node", and does same
ownership cycle checking as before. Note that this function does _not_
prevent ownership type mixups (e.g. rb_root owning list_node) - that's
handled by btf_parse_graph_root.
After this patch, a bpf program can have a struct bpf_rb_root in a
map_value, but not add anything to nor do anything useful with it.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: f6a6a5a97628 ("bpf: Fix struct_meta lookup for bpf_obj_free_fields kfunc call")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Marchevsky <davemarchevsky@fb.com>
Date: Mon Feb 13 16:40:11 2023 -0800
bpf: Add bpf_rbtree_{add,remove,first} kfuncs
[ Upstream commit bd1279ae8a691d7ec75852c6d0a22139afb034a4 ]
This patch adds implementations of bpf_rbtree_{add,remove,first}
and teaches verifier about their BTF_IDs as well as those of
bpf_rb_{root,node}.
All three kfuncs have some nonstandard component to their verification
that needs to be addressed in future patches before programs can
properly use them:
* bpf_rbtree_add: Takes 'less' callback, need to verify it
* bpf_rbtree_first: Returns ptr_to_node_type(off=rb_node_off) instead
of ptr_to_rb_node(off=0). Return value ref is
non-owning.
* bpf_rbtree_remove: Returns ptr_to_node_type(off=rb_node_off) instead
of ptr_to_rb_node(off=0). 2nd arg (node) is a
non-owning reference.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-3-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: f6a6a5a97628 ("bpf: Fix struct_meta lookup for bpf_obj_free_fields kfunc call")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Marchevsky <davemarchevsky@fb.com>
Date: Mon Feb 13 16:40:13 2023 -0800
bpf: Add callback validation to kfunc verifier logic
[ Upstream commit 5d92ddc3de1b44a82108af68ed71f638ca20509a ]
Some BPF helpers take a callback function which the helper calls. For
each helper that takes such a callback, there's a special call to
__check_func_call with a callback-state-setting callback that sets up
verifier bpf_func_state for the callback's frame.
kfuncs don't have any of this infrastructure yet, so let's add it in
this patch, following existing helper pattern as much as possible. To
validate functionality of this added plumbing, this patch adds
callback handling for the bpf_rbtree_add kfunc and hopes to lay
groundwork for future graph datastructure callbacks.
In the "general plumbing" category we have:
* check_kfunc_call doing callback verification right before clearing
CALLER_SAVED_REGS, exactly like check_helper_call
* recognition of func_ptr BTF types in kfunc args as
KF_ARG_PTR_TO_CALLBACK + propagation of subprogno for this arg type
In the "rbtree_add / graph datastructure-specific plumbing" category:
* Since bpf_rbtree_add must be called while the spin_lock associated
with the tree is held, don't complain when callback's func_state
doesn't unlock it by frame exit
* Mark rbtree_add callback's args with ref_set_non_owning
to prevent rbtree api functions from being called in the callback.
Semantically this makes sense, as less() takes no ownership of its
args when determining which comes first.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: f6a6a5a97628 ("bpf: Fix struct_meta lookup for bpf_obj_free_fields kfunc call")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Marchevsky <davemarchevsky@fb.com>
Date: Mon Feb 13 16:40:12 2023 -0800
bpf: Add support for bpf_rb_root and bpf_rb_node in kfunc args
[ Upstream commit cd6791b4b6f66f6b7925c840efe5c8fa0ce1ac87 ]
Now that we find bpf_rb_root and bpf_rb_node in structs, let's give args
that contain those types special classification and properly handle
these types when checking kfunc args.
"Properly handling" these types largely requires generalizing similar
handling for bpf_list_{head,node}, with little new logic added in this
patch.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: f6a6a5a97628 ("bpf: Fix struct_meta lookup for bpf_obj_free_fields kfunc call")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stanislav Fomichev <sdf@google.com>
Date: Tue Apr 18 15:53:38 2023 -0700
bpf: Don't EFAULT for getsockopt with optval=NULL
[ Upstream commit 00e74ae0863827d944e36e56a4ce1e77e50edb91 ]
Some socket options do getsockopt with optval=NULL to estimate the size
of the final buffer (which is returned via optlen). This breaks BPF
getsockopt assumptions about permitted optval buffer size. Let's enforce
these assumptions only when non-NULL optval is provided.
Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/ZD7Js4fj5YyI2oLd@google.com/T/#mb68daf700f87a9244a15d01d00c3f0e5b08f49f7
Link: https://lore.kernel.org/bpf/20230418225343.553806-2-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrii Nakryiko <andrii@kernel.org>
Date: Wed Mar 8 10:41:14 2023 -0800
bpf: factor out fetching basic kfunc metadata
[ Upstream commit 07236eab7a3139da97aef9f5f21f403be82a82ea ]
Factor out logic to fetch basic kfunc metadata based on struct bpf_insn.
This is not exactly short or trivial code to just copy/paste and this
information is sometimes necessary in other parts of the verifier logic.
Subsequent patches will rely on this to determine if an instruction is
a kfunc call to iterator next method.
No functional changes intended, including that verbose() warning
behavior when kfunc is not allowed for a particular program type.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: f6a6a5a97628 ("bpf: Fix struct_meta lookup for bpf_obj_free_fields kfunc call")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Borkmann <daniel@iogearbox.net>
Date: Wed Mar 22 22:30:55 2023 +0100
bpf: Fix __reg_bound_offset 64->32 var_off subreg propagation
[ Upstream commit 7be14c1c9030f73cc18b4ff23b78a0a081f16188 ]
Xu reports that after commit 3f50f132d840 ("bpf: Verifier, do explicit ALU32
bounds tracking"), the following BPF program is rejected by the verifier:
0: (61) r2 = *(u32 *)(r1 +0) ; R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2
3: (07) r1 += 1
4: (2d) if r1 > r3 goto pc+8
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff))
6: (18) r0 = 0x7fffffffffffff10
8: (0f) r1 += r0 ; R1_w=scalar(umin=0x7fffffffffffff10,umax=0x800000000000000f)
9: (18) r0 = 0x8000000000000000
11: (07) r0 += 1
12: (ad) if r0 < r1 goto pc-2
13: (b7) r0 = 0
14: (95) exit
And the verifier log says:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0)
4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0)
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0)
6: (18) r0 = 0x7fffffffffffff10 ; R0_w=9223372036854775568
8: (0f) r1 += r0 ; R0_w=9223372036854775568 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775823,s32_min=-240,s32_max=15)
9: (18) r0 = 0x8000000000000000 ; R0_w=-9223372036854775808
11: (07) r0 += 1 ; R0_w=-9223372036854775807
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775809)
13: (b7) r0 = 0 ; R0_w=0
14: (95) exit
from 12 to 11: R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775806
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775806 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775810,var_off=(0x8000000000000000; 0xffffffff))
13: safe
[...]
from 12 to 11: R0_w=-9223372036854775795 R1=scalar(umin=9223372036854775822,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775794
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775822,umax=9223372036854775822,var_off=(0x8000000000000000; 0xffffffff))
13: safe
from 12 to 11: R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775793
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff))
13: safe
from 12 to 11: R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775792
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775792 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff))
13: safe
[...]
The 64bit umin=9223372036854775810 bound continuously bumps by +1 while
umax=9223372036854775823 stays as-is until the verifier complexity limit
is reached and the program gets finally rejected. During this simulation,
the umin also eventually surpasses umax. Looking at the first 'from 12
to 11' output line from the loop, R1 has the following state:
R1_w=scalar(umin=0x8000000000000002 (9223372036854775810),
umax=0x800000000000000f (9223372036854775823),
var_off=(0x8000000000000000;
0xffffffff))
The var_off has technically not an inconsistent state but it's very
imprecise and far off surpassing 64bit umax bounds whereas the expected
output with refined known bits in var_off should have been like:
R1_w=scalar(umin=0x8000000000000002 (9223372036854775810),
umax=0x800000000000000f (9223372036854775823),
var_off=(0x8000000000000000;
0xf))
In the above log, var_off stays as var_off=(0x8000000000000000; 0xffffffff)
and does not converge into a narrower mask where more bits become known,
eventually transforming R1 into a constant upon umin=9223372036854775823,
umax=9223372036854775823 case where the verifier would have terminated and
let the program pass.
The __reg_combine_64_into_32() marks the subregister unknown and propagates
64bit {s,u}min/{s,u}max bounds to their 32bit equivalents iff they are within
the 32bit universe. The question came up whether __reg_combine_64_into_32()
should special case the situation that when 64bit {s,u}min bounds have
the same value as 64bit {s,u}max bounds to then assign the latter as
well to the 32bit reg->{s,u}32_{min,max}_value. As can be seen from the
above example however, that is just /one/ special case and not a /generic/
solution given above example would still not be addressed this way and
remain at an imprecise var_off=(0x8000000000000000; 0xffffffff).
The improvement is needed in __reg_bound_offset() to refine var32_off with
the updated var64_off instead of the prior reg->var_off. The reg_bounds_sync()
code first refines information about the register's min/max bounds via
__update_reg_bounds() from the current var_off, then in __reg_deduce_bounds()
from sign bit and with the potentially learned bits from bounds it'll
update the var_off tnum in __reg_bound_offset(). For example, intersecting
with the old var_off might have improved bounds slightly, e.g. if umax
was 0x7f...f and var_off was (0; 0xf...fc), then new var_off will then
result in (0; 0x7f...fc). The intersected var64_off holds then the
universe which is a superset of var32_off. The point for the latter is
not to broaden, but to further refine known bits based on the intersection
of var_off with 32 bit bounds, so that we later construct the final var_off
from upper and lower 32 bits. The final __update_reg_bounds() can then
potentially still slightly refine bounds if more bits became known from the
new var_off.
After the improvement, we can see R1 converging successively:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0)
4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0)
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0)
6: (18) r0 = 0x7fffffffffffff10 ; R0_w=9223372036854775568
8: (0f) r1 += r0 ; R0_w=9223372036854775568 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775823,s32_min=-240,s32_max=15)
9: (18) r0 = 0x8000000000000000 ; R0_w=-9223372036854775808
11: (07) r0 += 1 ; R0_w=-9223372036854775807
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775809)
13: (b7) r0 = 0 ; R0_w=0
14: (95) exit
from 12 to 11: R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775806
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775806 R1_w=-9223372036854775806
13: safe
from 12 to 11: R0_w=-9223372036854775806 R1_w=scalar(umin=9223372036854775811,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775805
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775805 R1_w=-9223372036854775805
13: safe
[...]
from 12 to 11: R0_w=-9223372036854775798 R1=scalar(umin=9223372036854775819,umax=9223372036854775823,var_off=(0x8000000000000008; 0x7),s32_min=8,s32_max=15,u32_min=8,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775797
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775797 R1=-9223372036854775797
13: safe
from 12 to 11: R0_w=-9223372036854775797 R1=scalar(umin=9223372036854775820,umax=9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775796
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775796 R1=-9223372036854775796
13: safe
from 12 to 11: R0_w=-9223372036854775796 R1=scalar(umin=9223372036854775821,umax=9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775795
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775795 R1=-9223372036854775795
13: safe
from 12 to 11: R0_w=-9223372036854775795 R1=scalar(umin=9223372036854775822,umax=9223372036854775823,var_off=(0x800000000000000e; 0x1),s32_min=14,s32_max=15,u32_min=14,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775794
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775794 R1=-9223372036854775794
13: safe
from 12 to 11: R0_w=-9223372036854775794 R1=-9223372036854775793 R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775793
12: (ad) if r0 < r1 goto pc-2
last_idx 12 first_idx 12
parent didn't have regs=1 stack=0 marks: R0_rw=P-9223372036854775801 R1_r=scalar(umin=9223372036854775815,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
last_idx 11 first_idx 11
regs=1 stack=0 before 11: (07) r0 += 1
parent didn't have regs=1 stack=0 marks: R0_rw=P-9223372036854775805 R1_rw=scalar(umin=9223372036854775812,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
last_idx 12 first_idx 0
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 9: (18) r0 = 0x8000000000000000
last_idx 12 first_idx 12
parent didn't have regs=2 stack=0 marks: R0_rw=P-9223372036854775801 R1_r=Pscalar(umin=9223372036854775815,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
last_idx 11 first_idx 11
regs=2 stack=0 before 11: (07) r0 += 1
parent didn't have regs=2 stack=0 marks: R0_rw=P-9223372036854775805 R1_rw=Pscalar(umin=9223372036854775812,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
last_idx 12 first_idx 0
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 9: (18) r0 = 0x8000000000000000
regs=2 stack=0 before 8: (0f) r1 += r0
regs=3 stack=0 before 6: (18) r0 = 0x7fffffffffffff10
regs=2 stack=0 before 5: (71) r1 = *(u8 *)(r2 +0)
13: safe
from 4 to 13: safe
verification time 322 usec
stack depth 0
processed 56 insns (limit 1000000) max_states_per_insn 1 total_states 3 peak_states 3 mark_read 1
This also fixes up a test case along with this improvement where we match
on the verifier log. The updated log now has a refined var_off, too.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Xu Kuohai <xukuohai@huaweicloud.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230314203424.4015351-2-xukuohai@huaweicloud.com
Link: https://lore.kernel.org/bpf/20230322213056.2470-1-daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrii Nakryiko <andrii@kernel.org>
Date: Mon Mar 13 11:40:17 2023 -0700
bpf: fix precision propagation verbose logging
[ Upstream commit 34f0677e7afd3a292bc1aadda7ce8e35faedb204 ]
Fix wrong order of frame index vs register/slot index in precision
propagation verbose (level 2) output. It's wrong and very confusing as is.
Fixes: 529409ea92d5 ("bpf: propagate precision across all frames, not just the last one")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230313184017.4083374-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexei Starovoitov <ast@kernel.org>
Date: Thu Apr 20 18:49:01 2023 -0700
bpf: Fix race between btf_put and btf_idr walk.
[ Upstream commit acf1c3d68e9a31f10d92bc67ad4673cdae5e8d92 ]
Florian and Eduard reported hard dead lock:
[ 58.433327] _raw_spin_lock_irqsave+0x40/0x50
[ 58.433334] btf_put+0x43/0x90
[ 58.433338] bpf_find_btf_id+0x157/0x240
[ 58.433353] btf_parse_fields+0x921/0x11c0
This happens since btf->refcount can be 1 at the time of btf_put() and
btf_put() will call btf_free_id() which will try to grab btf_idr_lock
and will dead lock.
Avoid the issue by doing btf_put() without locking.
Fixes: 3d78417b60fb ("bpf: Add bpf_btf_find_by_name_kind() helper.")
Fixes: 1e89106da253 ("bpf: Add bpf_core_add_cands() and wire it into bpf_core_apply_relo_insn().")
Reported-by: Florian Westphal <fw@strlen.de>
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20230421014901.70908-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Marchevsky <davemarchevsky@fb.com>
Date: Mon Apr 3 13:00:27 2023 -0700
bpf: Fix struct_meta lookup for bpf_obj_free_fields kfunc call
[ Upstream commit f6a6a5a976288e4d0d94eb1c6c9e983e8e5cdb31 ]
bpf_obj_drop_impl has a void return type. In check_kfunc_call, the "else
if" which sets insn_aux->kptr_struct_meta for bpf_obj_drop_impl is
surrounded by a larger if statement which checks btf_type_is_ptr. As a
result:
* The bpf_obj_drop_impl-specific code will never execute
* The btf_struct_meta input to bpf_obj_drop is always NULL
* __bpf_obj_drop_impl will always see a NULL btf_record when called
from BPF program, and won't call bpf_obj_free_fields
* program-allocated kptrs which have fields that should be cleaned up
by bpf_obj_free_fields may instead leak resources
This patch adds a btf_type_is_void branch to the larger if and moves
special handling for bpf_obj_drop_impl there, fixing the issue.
Fixes: ac9f06050a35 ("bpf: Introduce bpf_obj_drop")
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230403200027.2271029-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Marchevsky <davemarchevsky@fb.com>
Date: Sun Feb 12 01:27:07 2023 -0800
bpf: Migrate release_on_unlock logic to non-owning ref semantics
[ Upstream commit 6a3cd3318ff65622415e34e8ee39d76331e7c869 ]
This patch introduces non-owning reference semantics to the verifier,
specifically linked_list API kfunc handling. release_on_unlock logic for
refs is refactored - with small functional changes - to implement these
semantics, and bpf_list_push_{front,back} are migrated to use them.
When a list node is pushed to a list, the program still has a pointer to
the node:
n = bpf_obj_new(typeof(*n));
bpf_spin_lock(&l);
bpf_list_push_back(&l, n);
/* n still points to the just-added node */
bpf_spin_unlock(&l);
What the verifier considers n to be after the push, and thus what can be
done with n, are changed by this patch.
Common properties both before/after this patch:
* After push, n is only a valid reference to the node until end of
critical section
* After push, n cannot be pushed to any list
* After push, the program can read the node's fields using n
Before:
* After push, n retains the ref_obj_id which it received on
bpf_obj_new, but the associated bpf_reference_state's
release_on_unlock field is set to true
* release_on_unlock field and associated logic is used to implement
"n is only a valid ref until end of critical section"
* After push, n cannot be written to, the node must be removed from
the list before writing to its fields
* After push, n is marked PTR_UNTRUSTED
After:
* After push, n's ref is released and ref_obj_id set to 0. NON_OWN_REF
type flag is added to reg's type, indicating that it's a non-owning
reference.
* NON_OWN_REF flag and logic is used to implement "n is only a
valid ref until end of critical section"
* n can be written to (except for special fields e.g. bpf_list_node,
timer, ...)
Summary of specific implementation changes to achieve the above:
* release_on_unlock field, ref_set_release_on_unlock helper, and logic
to "release on unlock" based on that field are removed
* The anonymous active_lock struct used by bpf_verifier_state is
pulled out into a named struct bpf_active_lock.
* NON_OWN_REF type flag is introduced along with verifier logic
changes to handle non-owning refs
* Helpers are added to use NON_OWN_REF flag to implement non-owning
ref semantics as described above
* invalidate_non_owning_refs - helper to clobber all non-owning refs
matching a particular bpf_active_lock identity. Replaces
release_on_unlock logic in process_spin_lock.
* ref_set_non_owning - set NON_OWN_REF type flag after doing some
sanity checking
* ref_convert_owning_non_owning - convert owning reference w/
specified ref_obj_id to non-owning references. Set NON_OWN_REF
flag for each reg with that ref_obj_id and 0-out its ref_obj_id
* Update linked_list selftests to account for minor semantic
differences introduced by this patch
* Writes to a release_on_unlock node ref are not allowed, while
writes to non-owning reference pointees are. As a result the
linked_list "write after push" failure tests are no longer scenarios
that should fail.
* The test##missing_lock##op and test##incorrect_lock##op
macro-generated failure tests need to have a valid node argument in
order to have the same error output as before. Otherwise
verification will fail early and the expected error output won't be seen.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230212092715.1422619-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: f6a6a5a97628 ("bpf: Fix struct_meta lookup for bpf_obj_free_fields kfunc call")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luis Gerhorst <gerhorst@cs.fau.de>
Date: Wed Mar 15 17:54:00 2023 +0100
bpf: Remove misleading spec_v1 check on var-offset stack read
[ Upstream commit 082cdc69a4651dd2a77539d69416a359ed1214f5 ]
For every BPF_ADD/SUB involving a pointer, adjust_ptr_min_max_vals()
ensures that the resulting pointer has a constant offset if
bypass_spec_v1 is false. This is ensured by calling sanitize_check_bounds()
which in turn calls check_stack_access_for_ptr_arithmetic(). There,
-EACCESS is returned if the register's offset is not constant, thereby
rejecting the program.
In summary, an unprivileged user must never be able to create stack
pointers with a variable offset. That is also the case, because a
respective check in check_stack_write() is missing. If they were able
to create a variable-offset pointer, users could still use it in a
stack-write operation to trigger unsafe speculative behavior [1].
Because unprivileged users must already be prevented from creating
variable-offset stack pointers, viable options are to either remove
this check (replacing it with a clarifying comment), or to turn it
into a "verifier BUG"-message, also adding a similar check in
check_stack_write() (for consistency, as a second-level defense).
This patch implements the first option to reduce verifier bloat.
This check was introduced by commit 01f810ace9ed ("bpf: Allow
variable-offset stack access") which correctly notes that
"variable-offset reads and writes are disallowed (they were already
disallowed for the indirect access case) because the speculative
execution checking code doesn't support them". However, it does not
further discuss why the check in check_stack_read() is necessary.
The code which made this check obsolete was also introduced in this
commit.
I have compiled ~650 programs from the Linux selftests, Linux samples,
Cilium, and libbpf/examples projects and confirmed that none of these
trigger the check in check_stack_read() [2]. Instead, all of these
programs are, as expected, already rejected when constructing the
variable-offset pointers. Note that the check in
check_stack_access_for_ptr_arithmetic() also prints "off=%d" while the
code removed by this patch does not (the error removed does not appear
in the "verification_error" values). For reproducibility, the
repository linked includes the raw data and scripts used to create
the plot.
[1] https://arxiv.org/pdf/1807.03757.pdf
[2] https://gitlab.cs.fau.de/un65esoq/bpf-spectre/-/raw/53dc19fcf459c186613b1156a81504b39c8d49db/data/plots/23-02-26_23-56_bpftool/bpftool/0004-errors.pdf?inline=false
Fixes: 01f810ace9ed ("bpf: Allow variable-offset stack access")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230315165358.23701-1-gerhorst@cs.fau.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Marchevsky <davemarchevsky@fb.com>
Date: Sat Dec 17 00:24:57 2022 -0800
bpf: rename list_head -> graph_root in field info types
[ Upstream commit 30465003ad776a922c32b2dac58db14f120f037e ]
Many of the structs recently added to track field info for linked-list
head are useful as-is for rbtree root. So let's do a mechanical renaming
of list_head-related types and fields:
include/linux/bpf.h:
struct btf_field_list_head -> struct btf_field_graph_root
list_head -> graph_root in struct btf_field union
kernel/bpf/btf.c:
list_head -> graph_root in struct btf_field_info
This is a nonfunctional change, functionality to actually use these
fields for rbtree will be added in further patches.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20221217082506.1570898-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: f6a6a5a97628 ("bpf: Fix struct_meta lookup for bpf_obj_free_fields kfunc call")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: JP Kobryn <inwardvessel@gmail.com>
Date: Wed Mar 22 12:47:54 2023 -0700
bpf: return long from bpf_map_ops funcs
[ Upstream commit d7ba4cc900bf1eea2d8c807c6b1fc6bd61f41237 ]
This patch changes the return types of bpf_map_ops functions to long, where
previously int was returned. Using long allows for bpf programs to maintain
the sign bit in the absence of sign extension during situations where
inlined bpf helper funcs make calls to the bpf_map_ops funcs and a negative
error is returned.
The definitions of the helper funcs are generated from comments in the bpf
uapi header at `include/uapi/linux/bpf.h`. The return type of these
helpers was previously changed from int to long in commit bdb7b79b4ce8. For
any case where one of the map helpers call the bpf_map_ops funcs that are
still returning 32-bit int, a compiler might not include sign extension
instructions to properly convert the 32-bit negative value a 64-bit
negative value.
For example:
bpf assembly excerpt of an inlined helper calling a kernel function and
checking for a specific error:
; err = bpf_map_update_elem(&mymap, &key, &val, BPF_NOEXIST);
...
46: call 0xffffffffe103291c ; htab_map_update_elem
; if (err && err != -EEXIST) {
4b: cmp $0xffffffffffffffef,%rax ; cmp -EEXIST,%rax
kernel function assembly excerpt of return value from
`htab_map_update_elem` returning 32-bit int:
movl $0xffffffef, %r9d
...
movl %r9d, %eax
...results in the comparison:
cmp $0xffffffffffffffef, $0x00000000ffffffef
Fixes: bdb7b79b4ce8 ("bpf: Switch most helper return values from 32-bit int to 64-bit long")
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20230322194754.185781-3-inwardvessel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrii Nakryiko <andrii@kernel.org>
Date: Thu Mar 9 14:41:31 2023 -0800
bpf: take into account liveness when propagating precision
[ Upstream commit 52c2b005a3c18c565fc70cfd0ca49375f301e952 ]
When doing state comparison, if old state has register that is not
marked as REG_LIVE_READ, then we just skip comparison, regardless what's
the state of corresponing register in current state. This is because not
REG_LIVE_READ register is irrelevant for further program execution and
correctness. All good here.
But when we get to precision propagation, after two states were declared
equivalent, we don't take into account old register's liveness, and thus
attempt to propagate precision for register in current state even if
that register in old state was not REG_LIVE_READ anymore. This is bad,
because register in current state could be anything at all and this
could cause -EFAULT due to internal logic bugs.
Fix by taking into account REG_LIVE_READ liveness mark to keep the logic
in state comparison in sync with precision propagation.
Fixes: a3ce685dd01a ("bpf: fix precision tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230309224131.57449-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Quentin Monnet <quentin@isovalent.com>
Date: Wed Apr 5 14:21:15 2023 +0100
bpftool: Fix bug for long instructions in program CFG dumps
[ Upstream commit 67cf52cdb6c8fa6365d29106555dacf95c9fd374 ]
When dumping the control flow graphs for programs using the 16-byte long
load instruction, we need to skip the second part of this instruction
when looking for the next instruction to process. Otherwise, we end up
printing "BUG_ld_00" from the kernel disassembler in the CFG.
Fixes: efcef17a6d65 ("tools: bpftool: generate .dot graph from CFG information")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qu Wenruo <wqu@suse.com>
Date: Thu Apr 6 13:00:34 2023 +0800
btrfs: scrub: reject unsupported scrub flags
commit 604e6681e114d05a2e384c4d1e8ef81918037ef5 upstream.
Since the introduction of scrub interface, the only flag that we support
is BTRFS_SCRUB_READONLY. Thus there is no sanity checks, if there are
some undefined flags passed in, we just ignore them.
This is problematic if we want to introduce new scrub flags, as we have
no way to determine if such flags are supported.
Address the problem by introducing a check for the flags, and if
unsupported flags are set, return -EOPNOTSUPP to inform the user space.
This check should be backported for all supported kernels before any new
scrub flags are introduced.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Slark Xiao <slark_xiao@163.com>
Date: Fri Mar 10 18:17:15 2023 +0800
bus: mhi: host: pci_generic: Revert "Add a secondary AT port to Telit FN990"
commit 14853a0676c126aad836eb249499552fa9d6e85a upstream.
This reverts commit 2d5253a096c6057bbf7caa5520856dcdf7eca8bb.
There are 2 commits with commit message "Add a secondary AT port to Telit
FN990":
commit 2d5253a096c6 ("bus: mhi: host: pci_generic: Add a secondary AT port
to Telit FN990")
commit 479aa3b0ec2e ("bus: mhi: host: pci_generic: Add a secondary AT port
to Telit FN990")
This turned out to be due to the patch getting applied through different
trees and git settled on a resolution while applying it second time. But
the second AT port of Foxconn devices don't work in PCIe mode. So the
second commit needs to be reverted.
Cc: stable@vger.kernel.org # 6.2
Fixes: 2d5253a096c6 ("bus: mhi: host: pci_generic: Add a secondary AT port to Telit FN990")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20230310101715.69209-1-slark_xiao@163.com
[mani: massaged the commit message a bit, added fixes tag and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jeffrey Hugo <quic_jhugo@quicinc.com>
Date: Fri Mar 24 10:13:04 2023 -0600
bus: mhi: host: Range check CHDBOFF and ERDBOFF
commit 6a0c637bfee69a74c104468544d9f2a6579626d0 upstream.
If the value read from the CHDBOFF and ERDBOFF registers is outside the
range of the MHI register space then an invalid address might be computed
which later causes a kernel panic. Range check the read value to prevent
a crash due to bad data from the device.
Fixes: 6cd330ae76ff ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1679674384-27209-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jeffrey Hugo <quic_jhugo@quicinc.com>
Date: Mon Apr 10 09:58:11 2023 -0600
bus: mhi: host: Remove duplicate ee check for syserr
commit d469d9448a0f1a33c175d3280b1542fa0158ad7a upstream.
If we detect a system error via intvec, we only process the syserr if the
current ee is different than the last observed ee. The reason for this
check is to prevent bhie from running multiple times, but with the single
queue handling syserr, that is not possible.
The check can cause an issue with device recovery. If PBL loads a bad SBL
via BHI, but that SBL hangs before notifying the host of an ee change,
then issuing soc_reset to crash the device and retry (after supplying a
fixed SBL) will not recover the device as the host will observe a PBL->PBL
transition and not process the syserr. The device will be stuck until
either the driver is reloaded, or the host is rebooted. Instead, remove
the check so that we can attempt to recover the device.
Fixes: ef2126c4e2ea ("bus: mhi: core: Process execution environment changes serially")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1681142292-27571-2-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jeffrey Hugo <quic_jhugo@quicinc.com>
Date: Mon Apr 10 09:58:12 2023 -0600
bus: mhi: host: Use mhi_tryset_pm_state() for setting fw error state
commit 1d1493bdc25f498468a606a4ece947d155cfa3a9 upstream.
If firmware loading fails, the controller's pm_state is updated to
MHI_PM_FW_DL_ERR unconditionally. This can corrupt the pm_state as the
update is not done under the proper lock, and also does not validate
the state transition. The firmware loading can fail due to a detected
syserr, but if MHI_PM_FW_DL_ERR is unconditionally set as the pm_state,
the handling of the syserr can break when it attempts to transition from
syserr detect, to syserr process.
By grabbing the lock, we ensure we don't race with some other pm_state
update. By using mhi_try_set_pm_state(), we check that the transition
to MHI_PM_FW_DL_ERR is valid via the state machine logic. If it is not
valid, then some other transition is occurring like syserr processing, and
we assume that will resolve the firmware loading error.
Fixes: 12e050c77be0 ("bus: mhi: core: Move to an error state on any firmware load failure")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1681142292-27571-3-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pierre Gondois <pierre.gondois@arm.com>
Date: Fri Apr 14 10:14:49 2023 +0200
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
[ Upstream commit 7a306e3eabf2b2fd8cffa69b87b32dbf814d79ce ]
If there is no ACPI/DT information, it is assumed that L1 caches
are private and L2 (and higher) caches are shared. A cache is
'shared' between two CPUs if it is accessible from these two
CPUs.
Each CPU owns a representation (i.e. has a dedicated cacheinfo struct)
of the caches it has access to. cache_leaves_are_shared() tries to
identify whether two representations are designating the same actual
cache.
In cache_leaves_are_shared(), if 'this_leaf' is a L2 cache (or higher)
and 'sib_leaf' is a L1 cache, the caches are detected as shared as
only this_leaf's cache level is checked.
This is leads to setting sib_leaf as being shared with another CPU,
which is incorrect as this is a L1 cache.
Check 'sib_leaf->level'. Also update the comment as the function is
called when populating 'shared_cpu_map'.
Fixes: f16d1becf96f ("cacheinfo: Use cache identifiers to check if the caches are shared if available")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230414081453.244787-2-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xiubo Li <xiubli@redhat.com>
Date: Wed Apr 19 10:39:14 2023 +0800
ceph: fix potential use-after-free bug when trimming caps
commit aaf67de78807c59c35bafb5003d4fb457c764800 upstream.
When trimming the caps and just after the 'session->s_cap_lock' is
released in ceph_iterate_session_caps() the cap maybe removed by
another thread, and when using the stale cap memory in the callbacks
it will trigger use-after-free crash.
We need to check the existence of the cap just after the 'ci->i_ceph_lock'
being acquired. And do nothing if it's already removed.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/43272
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Paulo Alcantara <pc@manguebit.com>
Date: Tue Apr 25 02:42:56 2023 -0300
cifs: fix potential race when tree connecting ipc
commit ee20d7c6100752eaf2409d783f4f1449c29ea33d upstream.
Protect access of TCP_Server_Info::hostname when building the ipc tree
name as it might get freed in cifsd thread and thus causing an
use-after-free bug in __tree_connect_dfs_target(). Also, while at it,
update status of IPC tcon on success and then avoid any extra tree
connects.
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Paulo Alcantara <pc@manguebit.com>
Date: Fri Apr 21 15:52:32 2023 -0300
cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname
commit 90c49fce1c43e1cc152695e20363ff5087897c09 upstream.
TCP_Server_Info::hostname may be updated once or many times during
reconnect, so protect its access outside reconnect path as well and
then prevent any potential use-after-free bugs.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Paulo Alcantara <pc@manguebit.com>
Date: Sun Apr 23 23:26:51 2023 -0300
cifs: fix sharing of DFS connections
commit 8e3554150d6c80a84b3cb046615d1a0e943811dc upstream.
When matching DFS connections, we can't rely on the values set in
cifs_sb_info::prepath and cifs_tcon::tree_name as they might change
during DFS failover. The DFS referrals related to a specific DFS tcon
are already matched earlier in match_server(), therefore we can safely
skip those checks altogether as the connection is guaranteed to be
unique for the DFS tcon.
Besides, when creating or finding an SMB session, make sure to also
refcount any DFS root session related to it (cifs_ses::dfs_root_ses),
so if a new DFS mount ends up reusing the connection from the old
mount while there was an umount(2) still in progress (e.g. umount(2)
-> cifs_umount() -> reconnect -> cifs_put_tcon()), the connection
could potentially be put right after the umount(2) finished.
Patch has minor update to include fix for unused variable issue
noted by the kernel test robot
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305041040.j7W2xQSy-lkp@intel.com/
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Paulo Alcantara <pc@manguebit.com>
Date: Wed Apr 26 13:43:53 2023 -0300
cifs: protect access of TCP_Server_Info::{origin,leaf}_fullpath
commit 3dc9c433c9dde15477d02b609ccb4328e2adb6dc upstream.
Protect access of TCP_Server_Info::{origin,leaf}_fullpath when
matching DFS connections, and get rid of
TCP_Server_Info::current_fullpath while we're at it.
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Paulo Alcantara <pc@manguebit.com>
Date: Thu Apr 27 16:07:38 2023 -0300
cifs: protect session status check in smb2_reconnect()
commit 5bff9f741af60b143a5ae73417a8ec47fd5ff2f4 upstream.
Use @ses->ses_lock to protect access of @ses->ses_status.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Clément Léger <clement.leger@bootlin.com>
Date: Tue Jan 31 09:32:27 2023 +0100
clk: add missing of_node_put() in "assigned-clocks" property parsing
[ Upstream commit 27a6e1b09a782517fddac91259970ac466a3f7b6 ]
When returning from of_parse_phandle_with_args(), the np member of the
of_phandle_args structure should be put after usage. Add missing
of_node_put() calls in both __set_clk_parents() and __set_clk_rates().
Fixes: 86be408bfbd8 ("clk: Support for clock parents and rates assigned from device tree")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20230131083227.10990-1-clement.leger@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Mon Feb 27 12:59:31 2023 +0200
clk: at91: clk-sam9x60-pll: fix return value check
[ Upstream commit 1bd8e27fd0db0fe7f489213836dcbab92934f8fa ]
sam9x60_frac_pll_compute_mul_frac() can't return zero. Remove the check
against zero to reflect this.
Fixes: 43b1bb4a9b3e ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230227105931.2812412-1-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peng Fan <peng.fan@nxp.com>
Date: Mon Apr 3 17:52:55 2023 +0800
clk: imx: fracn-gppll: disable hardware select control
[ Upstream commit 4435467b15b069e5a6f50ca9a9260e86b74dbc13 ]
When programming PLL, should disable Hardware control select to make PLL
controlled by register, not hardware inputs through OSCPLL.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peng Fan <peng.fan@nxp.com>
Date: Mon Apr 3 17:52:54 2023 +0800
clk: imx: fracn-gppll: fix the rate table
[ Upstream commit cf8dccfedce848f67eaa42e8839305d028319161 ]
The Fvco should be range 2.4GHz to 5GHz, the original table voilate the
spec, so update the table to fix it.
Fixes: c196175acdd3 ("clk: imx: clk-fracn-gppll: Add more freq config for video pll")
Fixes: 044034efbeea ("clk: imx: clk-fracn-gppll: fix mfd value")
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peng Fan <peng.fan@nxp.com>
Date: Fri Mar 31 14:38:10 2023 +0800
clk: imx: imx8ulp: Fix XBAR_DIVBUS and AD_SLOW clock parents
[ Upstream commit d608c18018c897b88d66f1340fe274b7181817fa ]
XBAR_DIVBUS and AD_SLOW should set parent to XBAR_AD_DIVPLAT and
XBAR_DIVBUS respectively, not the NIC_AD. otherwise we will get
wrong clock rate.
Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230331063814.2462059-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yang Yingliang <yangyingliang@huawei.com>
Date: Thu Dec 29 17:29:46 2022 +0800
clk: mediatek: clk-pllfh: fix missing of_node_put() in fhctl_parse_dt()
[ Upstream commit f1d97a37f975ac615e4d6875c27516150642d499 ]
The device_node pointer returned by of_find_compatible_node() with
refcount incremented, when finish using it, the refcount need be
decreased.
Fixes: d7964de8a8ea ("clk: mediatek: Add new clock driver to handle FHCTL hardware")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221229092946.4162345-1-yangyingliang@huawei.com
[sboyd@kernel.org: Also unmap on error]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Mon Mar 6 15:05:11 2023 +0100
clk: mediatek: Consistently use GATE_MTK() macro
[ Upstream commit 4c85e20b656607897e3bb06ff565822fa4b4de95 ]
All the various MediaTek clock drivers are, in a way or another,
redefining the GATE_MTK() macro with different names: while some
are doing that by actually using GATE_MTK(), others are copying
it entirely (hence, entirely redefining it).
Change all clock drivers to always and consistently use this macro.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183, MT8192, MT8195 Chromebooks
Link: https://lore.kernel.org/r/20230306140543.1813621-23-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: fa8c0d01df62 ("clk: mediatek: mt7622: Properly use CLK_IS_CRITICAL flag")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Mon Mar 6 15:04:56 2023 +0100
clk: mediatek: mt2712: Add error handling to clk_mt2712_apmixed_probe()
[ Upstream commit 20cace1b9d7e33f68f0ee17196bf0df618dbacbe ]
This function was completely missing error handling: add it.
Fixes: e2f744a82d72 ("clk: mediatek: Add MT2712 clock support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Mon Mar 6 15:05:12 2023 +0100
clk: mediatek: mt7622: Properly use CLK_IS_CRITICAL flag
[ Upstream commit fa8c0d01df62130ff596d560380a6f844f62639e ]
Instead of calling clk_prepare_enable() for clocks that shall stay
enabled, use the CLK_IS_CRITICAL flag, which purpose is exactly that.
Fixes: 2fc0a509e4ee ("clk: mediatek: add clock support for MT7622 SoC")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-24-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Mon Mar 6 15:05:40 2023 +0100
clk: mediatek: mt8135: Properly use CLK_IS_CRITICAL flag
[ Upstream commit f4f9a9c003b52ea3cffda186753bfb3e37b970f8 ]
Instead of calling clk_prepare_enable() for clocks that shall stay
enabled, use the CLK_IS_CRITICAL flag, which purpose is exactly that.
Fixes: a8aede794843 ("clk: mediatek: Add basic clocks for Mediatek MT8135.")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230306140543.1813621-52-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Conor Dooley <conor.dooley@microchip.com>
Date: Thu Apr 13 23:20:45 2023 +0100
clk: microchip: fix potential UAF in auxdev release callback
commit 7455b7007b9e93bcc2bc9c1c6c73a228e3152069 upstream.
Similar to commit 1c11289b34ab ("peci: cpu: Fix use-after-free in
adev_release()"), the auxiliary device is not torn down in the correct
order. If auxiliary_device_add() fails, the release callback will be
called twice, resulting in a UAF. Due to timing, the auxdev code in this
driver "took inspiration" from the aforementioned commit, and thus its
bugs too!
Moving auxiliary_device_uninit() to the unregister callback instead
avoids the issue.
CC: stable@vger.kernel.org
Fixes: b56bae2dd6fd ("clk: microchip: mpfs: add reset controller")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230413-critter-synopsis-dac070a86cb4@spud
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed Dec 28 20:52:29 2022 +0200
clk: qcom: dispcc-qcm2290: get rid of test clock
[ Upstream commit 62db82f9c8004f1226f5cec8a5441fb89eb984fa ]
The test clock apparently it's not used by anyone upstream. Remove it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-9-dmitry.baryshkov@linaro.org
Stable-dep-of: 68d1151f0306 ("clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Wed Apr 12 16:53:06 2023 +0200
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
[ Upstream commit 68d1151f03067533827fc50b770954ef33149533 ]
There's only one DSI PHY on this SoC. Remove the ghost entry for the
clock produced by a secondary one.
Fixes: cc517ea3333f ("clk: qcom: Add display clock controller driver for QCM2290")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412-topic-qcm_dispcc-v1-2-bf2989a75ae4@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Wed Mar 15 18:30:48 2023 +0100
clk: qcom: gcc-qcm2290: Fix up gcc_sdcc2_apps_clk_src
[ Upstream commit 1bf088a9f0e50acd175ba8deef0db11c099fa26e ]
Add the PARENT_ENABLE flag to prevent the clock from getting stuck
at boot and use floor_ops to avoid SDHCI overclocking.
Fixes: 496d1a13d405 ("clk: qcom: Add Global Clock Controller driver for QCM2290")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315173048.3497655-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Wed Apr 5 00:47:19 2023 +0200
clk: qcom: gcc-sm6115: Mark RCGs shared where applicable
[ Upstream commit 996c32b745a15a637e8244a25f06b74acce98976 ]
The vast majority of shared RCGs were not marked as such. Fix it.
Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230404224719.909746-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed Apr 12 16:48:29 2023 +0300
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
[ Upstream commit 1a500e0bc97b6cb3c0d9859e81973b8dd07d1b7b ]
On SM8350 platform the PCIe PIPE clocks require additional handling to
function correctly. They are to be switched to the tcxo source before
turning PCIe GDSCs off and should be switched to PHY PIPE source once
they are working. Switch PCIe PHY clocks to use clk_regmap_phy_mux_ops,
which provide support for this dance.
Fixes: 44c20c9ed37f ("clk: qcom: gcc: Add clock driver for SM8350")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412134829.3686467-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Date: Fri Apr 7 14:52:55 2023 +0530
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
[ Upstream commit aad09fc7c4a522892eb64a79627b17a3869936cb ]
Add GDSCs in lpass_cc_sc7280_desc struct.
When qcom,adsp-pil-mode is enabled, GDSCs required to solve
dependencies in lpass_audiocc probe().
Fixes: 0cbcfbe50cbf ("clk: qcom: lpass: Handle the regmap overlap of lpasscc and lpass_aon")
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407092255.119690-4-quic_mohs@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Date: Fri Apr 7 14:52:54 2023 +0530
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
[ Upstream commit 4fc1c2d9a2b7a394f3b873aae5e03bffd8b5cd31 ]
The qdsp6ss memory region is being shared by ADSP remoteproc device and
lpasscc clock device, hence causing memory conflict.
To avoid this, when qdsp6ss clocks are being enabled in remoteproc driver,
skip qdsp6ss clock registration if "qcom,adsp-pil-mode" is enabled and
also assign max_register value.
Fixes: 4ab43d171181 ("clk: qcom: Add lpass clock controller driver for SC7280")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407092255.119690-3-quic_mohs@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Date: Thu Nov 17 13:04:31 2022 +0100
clk: rockchip: rk3399: allow clk_cifout to force clk_cifout_src to reparent
commit 933bf364e152cd60902cf9585c2ba310d593e69f upstream.
clk_cifout is derived from clk_cifout_src through an integer divider
limited to 32. clk_cifout_src is a child of either cpll, gpll or npll
without any possibility of a divider of any sort. The default clock
parent is cpll.
Let's allow clk_cifout to ask its parent clk_cifout_src to reparent in
order to find the real closest possible rate for clk_cifout and not one
derived from cpll only.
Cc: stable@vger.kernel.org # 4.10+
Fixes: fd8bc829336a ("clk: rockchip: fix the rk3399 cifout clock")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20221117-rk3399-cifout-set-rate-parent-v1-0-432548d04081@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qinrun Dai <flno@hust.edu.cn>
Date: Thu Apr 13 13:50:37 2023 +0000
clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails
[ Upstream commit fb73556386e074e9bee9fa2d253aeaefe4e063e0 ]
Smatch reports:
drivers/clocksource/timer-davinci.c:332 davinci_timer_register()
warn: 'base' from ioremap() not released on lines: 274.
Fix this and other potential memory leak problems
by adding a set of corresponding exit lables.
Fixes: 721154f972aa ("clocksource/drivers/davinci: Add support for clockevents")
Signed-off-by: Qinrun Dai <flno@hust.edu.cn>
Link: https://lore.kernel.org/r/20230413135037.1505799-1-flno@hust.edu.cn
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Suzuki K Poulose <suzuki.poulose@arm.com>
Date: Wed Apr 5 10:49:22 2023 +0100
coresight: etm_pmu: Set the module field
[ Upstream commit 18996a113f2567aef3057e300e3193ce2df1684c ]
struct pmu::module must be set to the module owning the PMU driver.
Set this for the coresight etm_pmu.
Fixes: 8e264c52e1dab ("coresight: core: Allow the coresight core driver to be built as a module")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230405094922.667834-1-suzuki.poulose@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Date: Fri Mar 24 18:11:28 2023 +0800
cpufreq: mediatek: fix KP caused by handler usage after regulator_put/clk_put
[ Upstream commit d51e106240bc755cbe59634b70d567c192b045b2 ]
Any kind of failure in mtk_cpu_dvfs_info_init() will lead to calling
regulator_put() or clk_put() and the KP will occur since the regulator/clk
handlers are used after released in mtk_cpu_dvfs_info_release().
To prevent the usage after regulator_put()/clk_put(), the regulator/clk
handlers are addressed in a way of "Free the Last Thing Style".
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Fixes: 4b9ceb757bbb ("cpufreq: mediatek: Enable clocks and regulators")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Suggested-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Date: Fri Mar 24 18:11:27 2023 +0800
cpufreq: mediatek: fix passing zero to 'PTR_ERR'
[ Upstream commit d51c63230994f167126d9d8381011b4cb2b0ad22 ]
In order to prevent passing zero to 'PTR_ERR' in
mtk_cpu_dvfs_info_init(), we fix the return value of of_get_cci() using
error pointer by explicitly casting error number.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Fixes: 0daa47325bae ("cpufreq: mediatek: Link CCI device to CPU")
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Fri Mar 24 18:11:30 2023 +0800
cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
[ Upstream commit 0883426fd07e39355362e3f2eb9aee1a154dcaf6 ]
During the addition of SRAM voltage tracking for CCI scaling, this
driver got some voltage limits set for the vtrack algorithm: these
were moved to platform data first, then enforced in a later commit
6a17b3876bc8 ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
using these as max values for the regulator_set_voltage() calls.
In this case, the vsram/vproc constraints for MT7622 and MT7623
were supposed to be the same as MT2701 (and a number of other SoCs),
but that turned out to be a mistake because the aforementioned two
SoCs' maximum voltage for both VPROC and VPROC_SRAM is 1.36V.
Fix that by adding new platform data for MT7622/7623 declaring the
right {proc,sram}_max_volt parameter.
Fixes: ead858bd128d ("cpufreq: mediatek: Move voltage limits to platform data")
Fixes: 6a17b3876bc8 ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Date: Fri Mar 24 18:11:29 2023 +0800
cpufreq: mediatek: raise proc/sram max voltage for MT8516
[ Upstream commit d3296bb4cafd4bad4a5cf2eeab9d19cc94f9e30e ]
Since the upper boundary of proc/sram voltage of MT8516 is 1300 mV,
which is greater than the value of MT2701 1150 mV, we fix it by adding
the corresponding platform data and specify proc/sram_max_volt to
support MT8516.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Fixes: ead858bd128d ("cpufreq: mediatek: Move voltage limits to platform data")
Fixes: 6a17b3876bc8 ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
Reported-by: Nick Hainke <vincent@systemli.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Thu Mar 23 18:40:26 2023 +0100
cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
commit ba5e770c9698782bc203bbf5cf3b36a77720bdbe upstream.
Commit 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data
during probe") moved getting memory resource and iomap from
qcom_cpufreq_hw_cpu_init() to the probe function, however it left
untouched cleanup in qcom_cpufreq_hw_cpu_exit().
During device unbind this will lead to doule release of resource and
double iounmap(), first by qcom_cpufreq_hw_cpu_exit() and second via
managed resources:
resource: Trying to free nonexistent resource <0x0000000018593000-0x0000000018593fff>
Trying to vunmap() nonexistent vm area (0000000088a7d4dc)
...
vunmap (mm/vmalloc.c:2771 (discriminator 1))
iounmap (mm/ioremap.c:60)
devm_ioremap_release (lib/devres.c:19)
devres_release_all (drivers/base/devres.c:506 drivers/base/devres.c:535)
device_unbind_cleanup (drivers/base/dd.c:523)
device_release_driver_internal (drivers/base/dd.c:1248 drivers/base/dd.c:1263)
device_driver_detach (drivers/base/dd.c:1300)
unbind_store (drivers/base/bus.c:243)
drv_attr_store (drivers/base/bus.c:127)
sysfs_kf_write (fs/sysfs/file.c:137)
kernfs_fop_write_iter (fs/kernfs/file.c:334)
vfs_write (include/linux/fs.h:1851 fs/read_write.c:491 fs/read_write.c:584)
ksys_write (fs/read_write.c:637)
__arm64_sys_write (fs/read_write.c:646)
invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57)
el0_svc_common.constprop.0 (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/syscall.c:150)
do_el0_svc (arch/arm64/kernel/syscall.c:194)
el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656)
el0t_64_sync (arch/arm64/kernel/entry.S:591)
Fixes: 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe")
Cc: <stable@vger.kernel.org>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bjorn Andersson <quic_bjorande@quicinc.com>
Date: Thu Mar 23 15:33:43 2023 -0700
cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
[ Upstream commit e2b47e585931a988c856fd4ba31e1296f749aee3 ]
The OSM/EPSS hardware controls the frequency of each CPU cluster based
on requests from the OS and various throttling events in the system.
While throttling is in effect the related dcvs interrupt will be kept
high. The purpose of the code handling this interrupt is to
continuously report the thermal pressure based on the throttled
frequency.
The reasoning for adding QoS control to this mechanism is not entirely
clear, but the introduction of commit 'c4c0efb06f17 ("cpufreq:
qcom-cpufreq-hw: Add cpufreq qos for LMh")' causes the
scaling_max_frequncy to be set to the throttled frequency. On the next
iteration of polling, the throttled frequency is above or equal to the
newly requested frequency, so the polling is stopped.
With cpufreq limiting the max frequency, the hardware no longer report a
throttling state and no further updates to thermal pressure or qos
state are made.
The result of this is that scaling_max_frequency can only go down, and
the system becomes slower and slower every time a thermal throttling
event is reported by the hardware.
Even if the logic could be improved, there is no reason for software to
limit the max freqency in response to the hardware limiting the max
frequency. At best software will follow the reported hardware state, but
typically it will cause slower backoff of the throttling.
This reverts commit c4c0efb06f17fa4a37ad99e7752b18a5405c76dc.
Fixes: c4c0efb06f17 ("cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh")
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sanjay Chandrashekara <sanjayc@nvidia.com>
Date: Tue Apr 18 17:04:54 2023 +0530
cpufreq: use correct unit when verify cur freq
[ Upstream commit 44295af5019f1997d038ad2611086a2d1e2af167 ]
cpufreq_verify_current_freq checks() if the frequency returned by
the hardware has a slight delta with the valid frequency value
last set and returns "policy->cur" if the delta is within "1 MHz".
In the comparison, "policy->cur" is in "kHz" but it's compared
against HZ_PER_MHZ. So, the comparison range becomes "1 GHz".
Fix this by comparing against KHZ_PER_MHZ instead of HZ_PER_MHZ.
Fixes: f55ae08c8987 ("cpufreq: Avoid unnecessary frequency updates due to mismatch")
Signed-off-by: Sanjay Chandrashekara <sanjayc@nvidia.com>
[ sumit gupta: Commit message update ]
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Toke Høiland-Jørgensen <toke@redhat.com>
Date: Mon Mar 13 10:17:24 2023 +0100
crypto: api - Demote BUG_ON() in crypto_unregister_alg() to a WARN_ON()
commit a543ada7db729514ddd3ba4efa45f4c7b802ad85 upstream.
The crypto_unregister_alg() function expects callers to ensure that any
algorithm that is unregistered has a refcnt of exactly 1, and issues a
BUG_ON() if this is not the case. However, there are in fact drivers that
will call crypto_unregister_alg() without ensuring that the refcnt has been
lowered first, most notably on system shutdown. This causes the BUG_ON() to
trigger, which prevents a clean shutdown and hangs the system.
To avoid such hangs on shutdown, demote the BUG_ON() in
crypto_unregister_alg() to a WARN_ON() with early return. Cc stable because
this problem was observed on a 6.2 kernel, cf the link below.
Link: https://lore.kernel.org/r/87r0tyq8ph.fsf@toke.dk
Cc: stable@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Biggers <ebiggers@google.com>
Date: Sun Feb 26 22:32:23 2023 -0800
crypto: arm64/aes-neonbs - fix crash with CFI enabled
commit 47446d7cd42358ca7d7a544f2f7823db03f616ff upstream.
aesbs_ecb_encrypt(), aesbs_ecb_decrypt(), aesbs_xts_encrypt(), and
aesbs_xts_decrypt() are called via indirect function calls. Therefore
they need to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause
their type hashes to be emitted when the kernel is built with
CONFIG_CFI_CLANG=y. Otherwise, the code crashes with a CFI failure if
the compiler doesn't happen to optimize out the indirect calls.
Fixes: c50d32859e70 ("arm64: Add types to indirect called assembly functions")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Tue Mar 21 07:59:30 2023 +0100
crypto: caam - Clear some memory in instantiate_rng
[ Upstream commit 9c19fb86a8cb2ee82a832c95e139f29ea05c4d08 ]
According to the comment at the end of the 'for' loop just a few lines
below, it looks needed to clear 'desc'.
So it should also be cleared for the first iteration.
Move the memset() to the beginning of the loop to be safe.
Fixes: 281922a1d4f5 ("crypto: caam - add support for SEC v5.x RNG4")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Mon Apr 3 12:38:01 2023 -0500
crypto: ccp - Don't initialize CCP for PSP 0x1649
commit c79a3169b9f3633c215b55857eba5921e5b49217 upstream.
A number of platforms are emitting the error:
```ccp: unable to access the device: you might be running a broken BIOS.```
This is expected behavior as CCP is no longer accessible from the PSP's
PCIe BAR so stop trying to probe CCP for 0x1649.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue Mar 28 11:35:23 2023 +0800
crypto: drbg - Only fail when jent is unavailable in FIPS mode
[ Upstream commit 686cd976b6ddedeeb1a1fb09ba53a891d3cc9a03 ]
When jent initialisation fails for any reason other than ENOENT,
the entire drbg fails to initialise, even when we're not in FIPS
mode. This is wrong because we can still use the kernel RNG when
we're not in FIPS mode.
Change it so that it only fails when we are in FIPS mode.
Fixes: 57225e679788 ("crypto: drbg - Use callback API for random readiness")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shashank Gupta <shashank.gupta@intel.com>
Date: Mon Feb 27 15:55:42 2023 -0500
crypto: qat - fix concurrency issue when device state changes
[ Upstream commit 1bdc85550a2b59bb7f62ead7173134e66dd2d60e ]
The sysfs `state` attribute is not protected against race conditions.
If multiple processes perform a device state transition on the same
device in parallel, unexpected behaviors might occur.
For transitioning the device state, adf_sysfs.c calls the functions
adf_dev_init(), adf_dev_start(), adf_dev_stop() and adf_dev_shutdown()
which are unprotected and interdependent on each other. To perform a
state transition, these functions needs to be called in a specific
order:
* device up: adf_dev_init() -> adf_dev_start()
* device down: adf_dev_stop() -> adf_dev_shutdown()
This change introduces the functions adf_dev_up() and adf_dev_down()
which wrap the state machine functions and protect them with a
per-device lock. These are then used in adf_sysfs.c instead of the
individual state transition functions.
Fixes: 5ee52118ac14 ("crypto: qat - expose device state through sysfs for 4xxx")
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Suman Anna <s-anna@ti.com>
Date: Fri Mar 24 20:28:12 2023 +0530
crypto: sa2ul - Select CRYPTO_DES
[ Upstream commit 8832023efd20966e29944dac92118dfbf1fa1bc0 ]
The SA2UL Crypto driver provides support for couple of
DES3 algos "cbc(des3_ede)" and "ecb(des3_ede)", and enabling
the crypto selftest throws the following errors (as seen on
K3 J721E SoCs):
saul-crypto 4e00000.crypto: Error allocating fallback algo cbc(des3_ede)
alg: skcipher: failed to allocate transform for cbc-des3-sa2ul: -2
saul-crypto 4e00000.crypto: Error allocating fallback algo ecb(des3_ede)
alg: skcipher: failed to allocate transform for ecb-des3-sa2ul: -2
Fix this by selecting CRYPTO_DES which was missed while
adding base driver support.
Fixes: 7694b6ca649f ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jonathan McDowell <noodles@earth.li>
Date: Tue Feb 28 18:28:58 2023 +0000
crypto: safexcel - Cleanup ring IRQ workqueues on load failure
commit ca25c00ccbc5f942c63897ed23584cfc66e8ec81 upstream.
A failure loading the safexcel driver results in the following warning
on boot, because the IRQ affinity has not been correctly cleaned up.
Ensure we clean up the affinity and workqueues on a failure to load the
driver.
crypto-safexcel: probe of f2800000.crypto failed with error -2
------------[ cut here ]------------
WARNING: CPU: 1 PID: 232 at kernel/irq/manage.c:1913 free_irq+0x300/0x340
Modules linked in: hwmon mdio_i2c crypto_safexcel(+) md5 sha256_generic libsha256 authenc libdes omap_rng rng_core nft_masq nft_nat nft_chain_nat nf_nat nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables libcrc32c nfnetlink fuse autofs4
CPU: 1 PID: 232 Comm: systemd-udevd Tainted: G W 6.1.6-00002-g9d4898824677 #3
Hardware name: MikroTik RB5009 (DT)
pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : free_irq+0x300/0x340
lr : free_irq+0x2e0/0x340
sp : ffff800008fa3890
x29: ffff800008fa3890 x28: 0000000000000000 x27: 0000000000000000
x26: ffff8000008e6dc0 x25: ffff000009034cac x24: ffff000009034d50
x23: 0000000000000000 x22: 000000000000004a x21: ffff0000093e0d80
x20: ffff000009034c00 x19: ffff00000615fc00 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 000075f5c1584c5e
x14: 0000000000000017 x13: 0000000000000000 x12: 0000000000000040
x11: ffff000000579b60 x10: ffff000000579b62 x9 : ffff800008bbe370
x8 : ffff000000579dd0 x7 : 0000000000000000 x6 : ffff000000579e18
x5 : ffff000000579da8 x4 : ffff800008ca0000 x3 : ffff800008ca0188
x2 : 0000000013033204 x1 : ffff000009034c00 x0 : ffff8000087eadf0
Call trace:
free_irq+0x300/0x340
devm_irq_release+0x14/0x20
devres_release_all+0xa0/0x100
device_unbind_cleanup+0x14/0x60
really_probe+0x198/0x2d4
__driver_probe_device+0x74/0xdc
driver_probe_device+0x3c/0x110
__driver_attach+0x8c/0x190
bus_for_each_dev+0x6c/0xc0
driver_attach+0x20/0x30
bus_add_driver+0x148/0x1fc
driver_register+0x74/0x120
__platform_driver_register+0x24/0x30
safexcel_init+0x48/0x1000 [crypto_safexcel]
do_one_initcall+0x4c/0x1b0
do_init_module+0x44/0x1cc
load_module+0x1724/0x1be4
__do_sys_finit_module+0xbc/0x110
__arm64_sys_finit_module+0x1c/0x24
invoke_syscall+0x44/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x20/0x80
el0_svc+0x14/0x4c
el0t_64_sync_handler+0xb0/0xb4
el0t_64_sync+0x148/0x14c
---[ end trace 0000000000000000 ]---
Fixes: 1b44c5a60c13 ("inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Biggers <ebiggers@google.com>
Date: Mon Feb 27 10:29:47 2023 -0800
crypto: testmgr - fix RNG performance in fuzz tests
commit f900fde28883602b6c5e1027a6c912b673382aaf upstream.
The performance of the crypto fuzz tests has greatly regressed since
v5.18. When booting a kernel on an arm64 dev board with all software
crypto algorithms and CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled, the
fuzz tests now take about 200 seconds to run, or about 325 seconds with
lockdep enabled, compared to about 5 seconds before.
The root cause is that the random number generation has become much
slower due to commit d4150779e60f ("random32: use real rng for
non-deterministic randomness"). On my same arm64 dev board, at the time
the fuzz tests are run, get_random_u8() is about 345x slower than
prandom_u32_state(), or about 469x if lockdep is enabled.
Lockdep makes a big difference, but much of the rest comes from the
get_random_*() functions taking a *very* slow path when the CRNG is not
yet initialized. Since the crypto self-tests run early during boot,
even having a hardware RNG driver enabled (CONFIG_CRYPTO_DEV_QCOM_RNG in
my case) doesn't prevent this. x86 systems don't have this issue, but
they still see a significant regression if lockdep is enabled.
Converting the "Fully random bytes" case in generate_random_bytes() to
use get_random_bytes() helps significantly, improving the test time to
about 27 seconds. But that's still over 5x slower than before.
This is all a bit silly, though, since the fuzz tests don't actually
need cryptographically secure random numbers. So let's just make them
use a non-cryptographically-secure RNG as they did before. The original
prandom_u32() is gone now, so let's use prandom_u32_state() instead,
with an explicitly managed state, like various other self-tests in the
kernel source tree (rbtree_test.c, test_scanf.c, etc.) already do. This
also has the benefit that no locking is required anymore, so performance
should be even better than the original version that used prandom_u32().
Fixes: d4150779e60f ("random32: use real rng for non-deterministic randomness")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dan Williams <dan.j.williams@intel.com>
Date: Fri Apr 14 11:53:55 2023 -0700
cxl/hdm: Fail upon detecting 0-sized decoders
commit 7701c8bef4f14bd9f7940c6ed0e6a73584115a96 upstream.
Decoders committed with 0-size lead to later crashes on shutdown as
__cxl_dpa_release() assumes a 'struct resource' has been established in
the in 'cxlds->dpa_res'. Just fail the driver load in this instance
since there are deeper problems with the enumeration or the setup when
this happens.
Fixes: 9c57cde0dcbd ("cxl/hdm: Enumerate allocated DPA")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/168149843516.792294.11872242648319572632.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Mon May 1 17:42:06 2023 +0200
debugobject: Ensure pool refill (again)
commit 0af462f19e635ad522f28981238334620881badc upstream.
The recent fix to ensure atomicity of lookup and allocation inadvertently
broke the pool refill mechanism.
Prior to that change debug_objects_activate() and debug_objecs_assert_init()
invoked debug_objecs_init() to set up the tracking object for statically
initialized objects. That's not longer the case and debug_objecs_init() is
now the only place which does pool refills.
Depending on the number of statically initialized objects this can be
enough to actually deplete the pool, which was observed by Ido via a
debugobjects OOM warning.
Restore the old behaviour by adding explicit refill opportunities to
debug_objects_activate() and debug_objecs_assert_init().
Fixes: 63a759694eed ("debugobject: Prevent init race with static objects")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/871qk05a9d.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Wed Apr 12 09:54:39 2023 +0200
debugobject: Prevent init race with static objects
[ Upstream commit 63a759694eed61025713b3e14dd827c8548daadc ]
Statically initialized objects are usually not initialized via the init()
function of the subsystem. They are special cased and the subsystem
provides a function to validate whether an object which is not yet tracked
by debugobjects is statically initialized. This means the object is started
to be tracked on first use, e.g. activation.
This works perfectly fine, unless there are two concurrent operations on
that object. Schspa decoded the problem:
T0 T1
debug_object_assert_init(addr)
lock_hash_bucket()
obj = lookup_object(addr);
if (!obj) {
unlock_hash_bucket();
- > preemption
lock_subsytem_object(addr);
activate_object(addr)
lock_hash_bucket();
obj = lookup_object(addr);
if (!obj) {
unlock_hash_bucket();
if (is_static_object(addr))
init_and_track(addr);
lock_hash_bucket();
obj = lookup_object(addr);
obj->state = ACTIVATED;
unlock_hash_bucket();
subsys function modifies content of addr,
so static object detection does
not longer work.
unlock_subsytem_object(addr);
if (is_static_object(addr)) <- Fails
debugobject emits a warning and invokes the fixup function which
reinitializes the already active object in the worst case.
This race exists forever, but was never observed until mod_timer() got a
debug_object_assert_init() added which is outside of the timer base lock
held section right at the beginning of the function to cover the lockless
early exit points too.
Rework the code so that the lookup, the static object check and the
tracking object association happens atomically under the hash bucket
lock. This prevents the issue completely as all callers are serialized on
the hash bucket lock and therefore cannot observe inconsistent state.
Fixes: 3ac7fe5a4aab ("infrastructure to debug (dynamic) objects")
Reported-by: syzbot+5093ba19745994288b53@syzkaller.appspotmail.com
Debugged-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://syzkaller.appspot.com/bug?id=22c8a5938eab640d1c6bcc0e3dc7be519d878462
Link: https://lore.kernel.org/lkml/20230303161906.831686-1-schspa@gmail.com
Link: https://lore.kernel.org/r/87zg7dzgao.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Snitzer <snitzer@kernel.org>
Date: Tue Apr 4 11:59:00 2023 -0400
dm clone: call kmem_cache_destroy() in dm_clone_init() error path
commit 6827af4a9a9f5bb664c42abf7c11af4978d72201 upstream.
Otherwise the _hydration_cache will leak if dm_register_target() fails.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Tue Apr 18 15:57:47 2023 -0400
dm flakey: fix a crash with invalid table line
commit 98dba02d9a93eec11bffbb93c7c51624290702d2 upstream.
This command will crash with NULL pointer dereference:
dmsetup create flakey --table \
"0 `blockdev --getsize /dev/ram0` flakey /dev/ram0 0 0 1 2 corrupt_bio_byte 512"
Fix the crash by checking if arg_name is non-NULL before comparing it.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mike Snitzer <snitzer@kernel.org>
Date: Tue Apr 4 13:34:28 2023 -0400
dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path
commit 6b79a428c02769f2a11f8ae76bf866226d134887 upstream.
Otherwise the journal_io_cache will leak if dm_register_target() fails.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mike Snitzer <snitzer@kernel.org>
Date: Mon Apr 17 11:59:56 2023 -0400
dm ioctl: fix nested locking in table_clear() to remove deadlock concern
commit 3d32aaa7e66d5c1479a3c31d6c2c5d45dd0d3b89 upstream.
syzkaller found the following problematic rwsem locking (with write
lock already held):
down_read+0x9d/0x450 kernel/locking/rwsem.c:1509
dm_get_inactive_table+0x2b/0xc0 drivers/md/dm-ioctl.c:773
__dev_status+0x4fd/0x7c0 drivers/md/dm-ioctl.c:844
table_clear+0x197/0x280 drivers/md/dm-ioctl.c:1537
In table_clear, it first acquires a write lock
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L1520
down_write(&_hash_lock);
Then before the lock is released at L1539, there is a path shown above:
table_clear -> __dev_status -> dm_get_inactive_table -> down_read
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L773
down_read(&_hash_lock);
It tries to acquire the same read lock again, resulting in the deadlock
problem.
Fix this by moving table_clear()'s __dev_status() call to after its
up_write(&_hash_lock);
Cc: stable@vger.kernel.org
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yeongjin Gil <youngjin.gil@samsung.com>
Date: Mon Mar 20 15:59:32 2023 +0900
dm verity: fix error handling for check_at_most_once on FEC
commit e8c5d45f82ce0c238a4817739892fe8897a3dcc3 upstream.
In verity_end_io(), if bi_status is not BLK_STS_OK, it can be return
directly. But if FEC configured, it is desired to correct the data page
through verity_verify_io. And the return value will be converted to
blk_status and passed to verity_finish_io().
BTW, when a bit is set in v->validated_blocks, verity_verify_io() skips
verification regardless of I/O error for the corresponding bio. In this
case, the I/O error could not be returned properly, and as a result,
there is a problem that abnormal data could be read for the
corresponding block.
To fix this problem, when an I/O error occurs, do not skip verification
even if the bit related is set in v->validated_blocks.
Fixes: 843f38d382b1 ("dm verity: add 'check_at_most_once' option to only validate hashes once")
Cc: stable@vger.kernel.org
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Li Lingfeng <lilingfeng3@huawei.com>
Date: Tue Apr 18 16:38:04 2023 +0800
dm: don't lock fs when the map is NULL in process of resume
commit 38d11da522aacaa05898c734a1cec86f1e611129 upstream.
Commit fa247089de99 ("dm: requeue IO if mapping table not yet available")
added a detection of whether the mapping table is available in the IO
submission process. If the mapping table is unavailable, it returns
BLK_STS_RESOURCE and requeues the IO.
This can lead to the following deadlock problem:
dm create mount
ioctl(DM_DEV_CREATE_CMD)
ioctl(DM_TABLE_LOAD_CMD)
do_mount
vfs_get_tree
ext4_get_tree
get_tree_bdev
sget_fc
alloc_super
// got &s->s_umount
down_write_nested(&s->s_umount, ...);
ext4_fill_super
ext4_load_super
ext4_read_bh
submit_bio
// submit and wait io end
ioctl(DM_DEV_SUSPEND_CMD)
dev_suspend
do_resume
dm_suspend
__dm_suspend
lock_fs
freeze_bdev
get_active_super
grab_super
// wait for &s->s_umount
down_write(&s->s_umount);
dm_swap_table
__bind
// set md->map(can't get here)
IO will be continuously requeued while holding the lock since mapping
table is NULL. At the same time, mapping table won't be set since the
lock is not available.
Like request-based DM, bio-based DM also has the same problem.
It's not proper to just abort IO if the mapping table not available.
So clear DM_SKIP_LOCKFS_FLAG when the mapping table is NULL, this
allows the DM table to be loaded and the IO submitted upon resume.
Fixes: fa247089de99 ("dm: requeue IO if mapping table not yet available")
Cc: stable@vger.kernel.org
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Mon Apr 10 02:33:55 2023 +0300
dma: gpi: remove spurious unlock in gpi_ch_init
[ Upstream commit 91d6a468e335571f1e67e046050dea9af5fa4ebe ]
gpi_ch_init() doesn't lock the ctrl_lock mutex, so there is no need to
unlock it too. Instead the mutex is handled by the function
gpi_alloc_chan_resources(), which properly locks and unlocks the mutex.
=====================================
WARNING: bad unlock balance detected!
6.3.0-rc5-00253-g99792582ded1-dirty #15 Not tainted
-------------------------------------
kworker/u16:0/9 is trying to release lock (&gpii->ctrl_lock) at:
[<ffffb99d04e1284c>] gpi_alloc_chan_resources+0x108/0x5bc
but there are no more locks to release!
other info that might help us debug this:
6 locks held by kworker/u16:0/9:
#0: ffff575740010938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x220/0x594
#1: ffff80000809bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x220/0x594
#2: ffff575740f2a0f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188
#3: ffff57574b5570f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188
#4: ffffb99d06a2f180 (of_dma_lock){+.+.}-{3:3}, at: of_dma_request_slave_channel+0x138/0x280
#5: ffffb99d06a2ee20 (dma_list_mutex){+.+.}-{3:3}, at: dma_get_slave_channel+0x28/0x10c
stack backtrace:
CPU: 7 PID: 9 Comm: kworker/u16:0 Not tainted 6.3.0-rc5-00253-g99792582ded1-dirty #15
Hardware name: Google Pixel 3 (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0xa0/0xfc
show_stack+0x18/0x24
dump_stack_lvl+0x60/0xac
dump_stack+0x18/0x24
print_unlock_imbalance_bug+0x130/0x148
lock_release+0x270/0x300
__mutex_unlock_slowpath+0x48/0x2cc
mutex_unlock+0x20/0x2c
gpi_alloc_chan_resources+0x108/0x5bc
dma_chan_get+0x84/0x188
dma_get_slave_channel+0x5c/0x10c
gpi_of_dma_xlate+0x110/0x1a0
of_dma_request_slave_channel+0x174/0x280
dma_request_chan+0x3c/0x2d4
geni_i2c_probe+0x544/0x63c
platform_probe+0x68/0xc4
really_probe+0x148/0x2ac
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
device_add+0x60c/0x7d8
of_device_add+0x44/0x60
of_platform_device_create_pdata+0x90/0x124
of_platform_bus_create+0x15c/0x3c8
of_platform_populate+0x58/0xf8
devm_of_platform_populate+0x58/0xbc
geni_se_probe+0xf0/0x164
platform_probe+0x68/0xc4
really_probe+0x148/0x2ac
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x2bc/0x594
worker_thread+0x228/0x438
kthread+0x108/0x10c
ret_from_fork+0x10/0x20
Fixes: 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230409233355.453741-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Tue Feb 14 17:18:25 2023 +0200
dmaengine: at_xdmac: do not enable all cyclic channels
[ Upstream commit f8435befd81dd85b7b610598551fadf675849bc1 ]
Do not global enable all the cyclic channels in at_xdmac_resume(). Instead
save the global status in at_xdmac_suspend() and re-enable the cyclic
channel only if it was active before suspend.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-6-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shunsuke Mie <mie@igel.co.jp>
Date: Tue Apr 11 19:17:57 2023 +0900
dmaengine: dw-edma: Fix to change for continuous transfer
[ Upstream commit a251994a441ee0a69ba7062c8cd2d08ead3db379 ]
The dw-edma driver stops after processing a DMA request even if a request
remains in the issued queue, which is not the expected behavior. The DMA
engine API requires continuous processing.
Add a trigger to start after one processing finished if there are requests
remain.
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shunsuke Mie <mie@igel.co.jp>
Date: Tue Apr 11 19:17:58 2023 +0900
dmaengine: dw-edma: Fix to enable to issue dma request on DMA processing
[ Upstream commit 970b17dfe264a9085ba4e593730ecfd496b950ab ]
The issue_pending request is ignored while driver is processing a DMA
request. Fix to issue the pending requests on any dma channel status.
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-2-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Sun Mar 26 09:06:37 2023 +0200
dmaengine: mv_xor_v2: Fix an error code.
[ Upstream commit 827026ae2e56ec05ef1155661079badbbfc0b038 ]
If the probe is deferred, -EPROBE_DEFER should be returned, not
+EPROBE_DEFER.
Fixes: 3cd2c313f1d6 ("dmaengine: mv_xor_v2: Fix clock resource by adding a register clock")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/201170dff832a3c496d125772e10070cd834ebf2.1679814350.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Date: Wed May 3 14:19:37 2023 +0200
drbd: correctly submit flush bio on barrier
commit 3899d94e3831ee07ea6821c032dc297aec80586a upstream.
When we receive a flush command (or "barrier" in DRBD), we currently use
a REQ_OP_FLUSH with the REQ_PREFLUSH flag set.
The correct way to submit a flush bio is by using a REQ_OP_WRITE without
any data, and set the REQ_PREFLUSH flag.
Since commit b4a6bb3a67aa ("block: add a sanity check for non-write
flush/fua bios"), this triggers a warning in the block layer, but this
has been broken for quite some time before that.
So use the correct set of flags to actually make the flush happen.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@vger.kernel.org
Fixes: f9ff0da56437 ("drbd: allow parallel flushes for multi-volume resources")
Reported-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230503121937.17232-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tanmay Shah <tanmay.shah@amd.com>
Date: Fri Mar 10 17:24:07 2023 -0800
drivers: remoteproc: xilinx: Fix carveout names
commit 81c18e08a609706c5c2887f267135fa0dece4119 upstream.
If the unit address is appended to node name of memory-region,
then adding rproc carveouts fails as node name and unit-address
both are passed as carveout name (i.e. vdev0vring0@xxxxxxxx). However,
only node name is expected by remoteproc framework. This patch moves
memory-region node parsing from driver probe to prepare and
only passes node-name and not unit-address
Fixes: 6b291e8020a8 ("drivers: remoteproc: Add Xilinx r5 remoteproc driver")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230311012407.1292118-5-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Tue Feb 21 15:53:23 2023 +0100
drivers: staging: rtl8723bs: Fix locking in _rtw_join_timeout_handler()
[ Upstream commit 215792eda008f6a1e7ed9d77fa20d582d22bb114 ]
Commit 041879b12ddb ("drivers: staging: rtl8192bs: Fix deadlock in
rtw_joinbss_event_prehandle()") besides fixing the deadlock also
modified _rtw_join_timeout_handler() to use spin_[un]lock_irq()
instead of spin_[un]lock_bh().
_rtw_join_timeout_handler() calls rtw_do_join() which takes
pmlmepriv->scanned_queue.lock using spin_[un]lock_bh(). This
spin_unlock_bh() call re-enables softirqs which triggers an oops in
kernel/softirq.c: __local_bh_enable_ip() when it calls
lockdep_assert_irqs_enabled():
[ 244.506087] WARNING: CPU: 2 PID: 0 at kernel/softirq.c:376 __local_bh_enable_ip+0xa6/0x100
...
[ 244.509022] Call Trace:
[ 244.509048] <IRQ>
[ 244.509100] _rtw_join_timeout_handler+0x134/0x170 [r8723bs]
[ 244.509468] ? __pfx__rtw_join_timeout_handler+0x10/0x10 [r8723bs]
[ 244.509772] ? __pfx__rtw_join_timeout_handler+0x10/0x10 [r8723bs]
[ 244.510076] call_timer_fn+0x95/0x2a0
[ 244.510200] __run_timers.part.0+0x1da/0x2d0
This oops is causd by the switch to spin_[un]lock_irq() which disables
the IRQs for the entire duration of _rtw_join_timeout_handler().
Disabling the IRQs is not necessary since all code taking this lock
runs from either user contexts or from softirqs, switch back to
spin_[un]lock_bh() to fix this.
Fixes: 041879b12ddb ("drivers: staging: rtl8192bs: Fix deadlock in rtw_joinbss_event_prehandle()")
Cc: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230221145326.7808-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Tue Feb 21 15:53:24 2023 +0100
drivers: staging: rtl8723bs: Fix locking in rtw_scan_timeout_handler()
[ Upstream commit 3f467036093fedd7e231924327455fc609b5ef02 ]
Commit cc7ad0d77b51 ("drivers: staging: rtl8723bs: Fix deadlock in
rtw_surveydone_event_callback()") besides fixing the deadlock also
modified rtw_scan_timeout_handler() to use spin_[un]lock_irq()
instead of spin_[un]lock_bh().
Disabling the IRQs is not necessary since all code taking this lock
runs from either user contexts or from softirqs
rtw_scan_timeout_handler() is the only function taking pmlmepriv->lock
which uses spin_[un]lock_irq() for this. Switch back to
spin_[un]lock_bh() to make it consistent with the rest of the code.
Fixes: cc7ad0d77b51 ("drivers: staging: rtl8723bs: Fix deadlock in rtw_surveydone_event_callback()")
Cc: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230221145326.7808-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lee Jones <lee@kernel.org>
Date: Fri Mar 17 08:17:16 2023 +0000
drm/amd/display/dc/dce60/Makefile: Fix previous attempt to silence known override-init warnings
[ Upstream commit 4082b9f5ead4966797dddcfef0905d59e5a83873 ]
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:157:21: note: in expansion of macro ‘mmCRTC1_DCFE_MEM_LIGHT_SLEEP_CNTL’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.h:170:9: note: in expansion of macro ‘SRI’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:183:17: note: in expansion of macro ‘XFM_COMMON_REG_LIST_DCE60’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:188:17: note: in expansion of macro ‘transform_regs’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_d.h:722:43: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:157:21: note: in expansion of macro ‘mmCRTC2_DCFE_MEM_LIGHT_SLEEP_CNTL’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.h:170:9: note: in expansion of macro ‘SRI’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:183:17: note: in expansion of macro ‘XFM_COMMON_REG_LIST_DCE60’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:189:17: note: in expansion of macro ‘transform_regs’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_d.h:722:43: note: (near initialization for ‘xfm_regs[2].DCFE_MEM_LIGHT_SLEEP_CN
[100 lines snipped for brevity]
Fixes: ceb3cf476a441 ("drm/amd/display/dc/dce60/Makefile: Ignore -Woverride-init warning")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alex Hung <alex.hung@amd.com>
Date: Mon Apr 3 17:45:41 2023 +0800
drm/amd/display: fix a divided-by-zero error
[ Upstream commit 0b5dfe12755f87ec014bb4cc1930485026167430 ]
[Why & How]
timing.dsc_cfg.num_slices_v can be zero and it is necessary to check
before using it.
This fixes the error "divide error: 0000 [#1] PREEMPT SMP NOPTI".
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Date: Mon Apr 3 16:10:37 2023 +0300
drm/amd/display: Fix potential null dereference
[ Upstream commit 52f1783ff4146344342422c1cd94fcb4ce39b6fe ]
The adev->dm.dc pointer can be NULL and dereferenced in amdgpu_dm_fini()
without checking.
Add a NULL pointer check before calling dc_dmub_srv_destroy().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9a71c7d31734 ("drm/amd/display: Register DMUB service with DC")
Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hamza Mahfooz <hamza.mahfooz@amd.com>
Date: Thu Jan 5 10:54:12 2023 -0500
drm/amd/display: fix PSR-SU/DSC interoperability support
[ Upstream commit 13b90cf900ab69dd5cab3cc5035bc7614037e64e ]
Currently, there are issues with enabling PSR-SU + DSC. This stems from
the fact that DSC imposes a slice height on transmitted video data and
we are not conforming to that slice height in PSR-SU regions. So, pass
slice_height into su_y_granularity to feed the DSC slice height into
PSR-SU code.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 0b5dfe12755f ("drm/amd/display: fix a divided-by-zero error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Miess <Daniel.Miess@amd.com>
Date: Tue Apr 4 14:04:11 2023 -0400
drm/amd/display: limit timing for single dimm memory
[ Upstream commit 1e994cc0956b8dabd1b1fef315bbd722733b8aa8 ]
[Why]
1. It could hit bandwidth limitdation under single dimm
memory when connecting 8K external monitor.
2. IsSupportedVidPn got validation failed with
2K240Hz eDP + 8K24Hz external monitor.
3. It's better to filter out such combination in
EnumVidPnCofuncModality
4. For short term, filter out in dc bandwidth validation.
[How]
Force 2K@240Hz+8K@24Hz timing validation false in dc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nasir Osman <nasir.osman@amd.com>
Date: Wed Feb 1 14:16:12 2023 -0500
drm/amd/display: Remove stutter only configurations
[ Upstream commit 71c4ca2d3b079d0ba4d9b3033641fea906cebfb6 ]
[why]
Newer ASICs such as DCN314 needs to allow for both self refresh and mem
clk switching rather than just self refresh only. Otherwise, we can see
some p-state hangs on ASICs that do support mem clk switching.
[how]
Added an allow_self_refresh_only flag for dcn30_internal_validate_bw
and created a validate_bw method for DCN314 with the allow_self_refresh_only
flag set to false (to support mem clk switching).
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nasir Osman <nasir.osman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 1e994cc0956b ("drm/amd/display: limit timing for single dimm memory")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tim Huang <tim.huang@amd.com>
Date: Wed Mar 22 14:39:16 2023 +0800
drm/amd/pm: re-enable the gfx imu when smu resume
commit f7f28f268b861c29dd18086bb636abedf0ff59ff upstream.
If the gfx imu is poweroff when suspend, then
it need to be re-enabled when resume.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Orlando Chamberlain <orlandoch.dev@gmail.com>
Date: Fri Mar 3 22:34:25 2023 +1100
drm/amdgpu: register a vga_switcheroo client for MacBooks with apple-gmux
[ Upstream commit d37a3929ca0363ed1dce02b2772cd5bc547ca66d ]
Commit 3840c5bcc245 ("drm/amdgpu: disentangle runtime pm and
vga_switcheroo") made amdgpu only register a vga_switcheroo client for
GPU's with PX, however AMD GPUs in dual gpu Apple Macbooks do need to
register, but don't have PX. Instead of AMD's PX, they use apple-gmux.
Use apple_gmux_detect() to identify these gpus, and
pci_is_thunderbolt_attached() to ensure eGPUs connected to Dual GPU
Macbooks don't register with vga_switcheroo.
Fixes: 3840c5bcc245 ("drm/amdgpu: disentangle runtime pm and vga_switcheroo")
Link: https://lore.kernel.org/amd-gfx/20230210044826.9834-10-orlandoch.dev@gmail.com/
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adam Ford <aford173@gmail.com>
Date: Sun Mar 19 07:55:24 2023 -0500
drm/bridge: adv7533: Fix adv7533_mode_valid for adv7533 and adv7535
[ Upstream commit ee0285e13455fdbce5de315bdbe91b5f198a2a06 ]
When dynamically switching lanes was removed, the intent of the code
was to check to make sure that higher speed items used 4 lanes, but
it had the unintended consequence of removing the slower speeds for
4-lane users.
This attempts to remedy this by doing a check to see that the
max frequency doesn't exceed the chip limit, and a second
check to make sure that the max bit-rate doesn't exceed the
number of lanes * max bit rate / lane.
Fixes: 9a0cdcd6649b ("drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230319125524.58803-1-aford173@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Matt Roper <matthew.d.roper@intel.com>
Date: Wed Feb 8 12:09:05 2023 -0800
drm/i915/dg2: Drop one PCI ID
[ Upstream commit 3a38be31ec82920a871963c086393bc0ba26a655 ]
The bspec was recently updated to remove PCI ID 0x5698; this ID is
actually reserved for future use and should not be treated as DG2-G11.
Bspec: 44477
Fixes: 8618b8489ba6 ("drm/i915: DG2 and ATS-M device ID updates")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208200905.680865-1-matthew.d.roper@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Thu Apr 13 23:06:02 2023 +0300
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
[ Upstream commit 631420b06597a33c72b6dcef78d1c2dea17f452d ]
The point of the WARN was to print something, not oops
straight up. Currently that is precisely what happens
if we can't find the connector for the crtc in the atomic
state. Get the dev pointer from the atomic state instead
of the potentially NULL encoder to avoid that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413200602.6037-2-ville.syrjala@linux.intel.com
Fixes: 3a47ae201e07 ("drm/i915/display: Make WARN* drm specific where encoder ptr is available")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 3b6692357f70498f617ea1b31a0378070a0acf1c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Date: Mon Mar 13 22:27:11 2023 -0700
drm/lima/lima_drv: Add missing unwind goto in lima_pdev_probe()
[ Upstream commit c5647cae2704e58d1c4e5fedbf63f11bca6376c9 ]
Smatch reports:
drivers/gpu/drm/lima/lima_drv.c:396 lima_pdev_probe() warn:
missing unwind goto?
Store return value in err and goto 'err_out0' which has
lima_sched_slab_fini() before returning.
Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314052711.4061652-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xinlei Lee <xinlei.lee@mediatek.com>
Date: Wed Mar 29 14:43:23 2023 +0800
drm/mediatek: dp: Change the aux retries times when receiving AUX_DEFER
[ Upstream commit 9243d70e05c5989f84f840612965f96b524da925 ]
DP 1.4a Section 2.8.7.1.5.6.1:
A DP Source device shall retry at least seven times upon receiving
AUX_DEFER before giving up the AUX transaction.
The drm_dp_i2c_do_msg() function in the drm_dp_helper.c file will
judge the status of the msg->reply parameter passed to aux_transfer
for different processing.
Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1680072203-10394-1-git-send-email-xinlei.lee@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen-Yu Tsai <wenst@chromium.org>
Date: Thu Feb 2 12:57:34 2023 +0800
drm/mediatek: dp: Only trigger DRM HPD events if bridge is attached
[ Upstream commit 36b617f7e4ae663fcadd202ea061ca695ca75539 ]
The MediaTek DisplayPort interface bridge driver starts its interrupts
as soon as its probed. However when the interrupts trigger the bridge
might not have been attached to a DRM device. As drm_helper_hpd_irq_event()
does not check whether the passed in drm_device is valid or not, a NULL
pointer passed in results in a kernel NULL pointer dereference in it.
Check whether the bridge is attached and only trigger an HPD event if
it is.
Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230202045734.2773503-1-wenst@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johan Hovold <johan+linaro@kernel.org>
Date: Fri Mar 3 17:48:06 2023 +0100
drm/msm/adreno: drop bogus pm_runtime_set_active()
[ Upstream commit db7662d076c973072d788bd0e8130e04430307a1 ]
The runtime PM status can only be updated while runtime PM is disabled.
Drop the bogus pm_runtime_set_active() call that was made after enabling
runtime PM and which (incidentally but correctly) left the runtime PM
status set to 'suspended'.
Fixes: 2c087a336676 ("drm/msm/adreno: Load the firmware before bringing up the hardware")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524972/
Link: https://lore.kernel.org/r/20230303164807.13124-4-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vinod Polimera <quic_vpolimer@quicinc.com>
Date: Thu Mar 2 22:03:07 2023 +0530
drm/msm/disp/dpu: check for crtc enable rather than crtc active to release shared resources
[ Upstream commit b6975693846b562c4d3e0e60cc884affc5bdac00 ]
According to KMS documentation, The driver must not release any shared
resources if active is set to false but enable still true.
Fixes: ccc862b957c6 ("drm/msm/dpu: Fix reservation failures in modeset")
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524726/
Link: https://lore.kernel.org/r/1677774797-31063-5-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Sat Apr 15 13:00:30 2023 +0200
drm/panel: novatek-nt35950: Improve error handling
[ Upstream commit 5dd45b66742a1f3cfa9a92dc0ac8714c7708ee6c ]
In a very peculiar case when probing and registering with the secondary
DSI host succeeds, but the OF backlight or DSI attachment fails, the
primary DSI device is automatically cleaned up, but the secondary one
is not, leading to -EEXIST when the driver core tries to handle
-EPROBE_DEFER.
Unregister the DSI1 device manually on failure to prevent that.
Fixes: 623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230415-konrad-longbois-next-v1-1-ce695dc9df84@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Mon Apr 17 17:41:08 2023 +0200
drm/panel: novatek-nt35950: Only unregister DSI1 if it exists
[ Upstream commit a50be876f4fe2349dc8b056a49d87f69c944570f ]
Commit 5dd45b66742a ("drm/panel: novatek-nt35950: Improve error handling")
introduced logic to unregister DSI1 on any sort of probe failure, as
that's not done automatically by kernel APIs.
It did not however account for cases where only one DSI host is used.
Fix that.
Fixes: 5dd45b66742a ("drm/panel: novatek-nt35950: Improve error handling")
Reported-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417-topic-maple_panel_fixup-v1-1-07c8db606f5e@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dom Cobley <popcornmix@gmail.com>
Date: Fri Jan 27 16:40:52 2023 +0100
drm/probe-helper: Cancel previous job before starting new one
[ Upstream commit a8e47884f1906cd7440fafa056adc8817568e73e ]
Currently we schedule a call to output_poll_execute from
drm_kms_helper_poll_enable for 10s in future. Later we try to replace
that in drm_helper_probe_single_connector_modes with a 0s schedule with
delayed_event set.
But as there is already a job in the queue this fails, and the immediate
job we wanted with delayed_event set doesn't occur until 10s later.
And that call acts as if connector state has changed, reprobing modes.
This has a side effect of waking up a display that has been blanked.
Make sure we cancel the old job before submitting the immediate one.
Fixes: 162b6a57ac50 ("drm/probe-helper: don't lose hotplug event")
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
[Maxime: Switched to mod_delayed_work]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127154052.452524-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rob Clark <robdclark@chromium.org>
Date: Thu Jan 19 15:17:34 2023 -0800
drm/rockchip: Drop unbalanced obj unref
[ Upstream commit 8ee3b0e85f6ccd9e6c527bc50eaba774c3bb18d0 ]
In the error path, rockchip_drm_gem_object_mmap() is dropping an obj
reference that it doesn't own.
Fixes: 41315b793e13 ("drm/rockchip: use drm_gem_mmap helpers")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119231734.2884543-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Date: Tue Apr 4 22:06:48 2023 +0200
drm/ttm/pool: Fix ttm_pool_alloc error path
[ Upstream commit 379989e7cbdc7aa7496a00ee286ec146c7599cf0 ]
When hitting an error, the error path forgot to unmap dma mappings and
could call set_pages_wb() on already uncached pages.
Fix this by introducing a common ttm_pool_free_range() function that
does the right thing.
v2:
- Simplify that common function (Christian König)
v3:
- Rename that common function to ttm_pool_free_range() (Christian König)
Fixes: d099fc8f540a ("drm/ttm: new TT backend allocation pool v3")
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404200650.11043-2-thomas.hellstrom@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maíra Canal <mcanal@igalia.com>
Date: Thu Feb 2 09:55:17 2023 -0300
drm/vgem: add missing mutex_destroy
[ Upstream commit 7c18189b14b33c1fbf76480b1bd217877c086e67 ]
vgem_fence_open() instantiates a mutex for a particular fence
instance, but never destroys it by calling mutex_destroy() in
vgem_fence_close().
So, add the missing mutex_destroy() to guarantee proper resource
destruction.
Fixes: 407779848445 ("drm/vgem: Attach sw fences to exported vGEM dma-buf (ioctl)")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202125517.427976-1-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Krastev <krastevm@vmware.com>
Date: Mon Mar 20 22:09:49 2023 -0400
drm/vmwgfx: Fix Legacy Display Unit atomic drm support
commit a37a512db3fa1b65fe9087003e5b2072cefb3667 upstream.
Legacy Display Unit (LDU) fb dirty support used a custom fb dirty callback. Latter
handled only the DIRTYFB IOCTL presentation path but not the ADDFB2/PAGE_FLIP/RMFB
IOCTL path, common for Wayland compositors.
Get rid of the custom callback in favor of drm_atomic_helper_dirtyfb and unify the
handling of the presentation paths inside of vmw_ldu_primary_plane_atomic_update.
This also homogenizes the fb dirty callbacks across all DUs: LDU, SOU and STDU.
Signed-off-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Fixes: 2f5544ff0300 ("drm/vmwgfx: Use atomic helper function for dirty fb IOCTL")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230321020949.335012-3-zack@kde.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Adam Skladowski <a39.skl@gmail.com>
Date: Tue Mar 14 23:17:17 2023 +0100
drm: msm: adreno: Disable preemption on Adreno 510
[ Upstream commit 010c8bbad2cb8c33c47963e29f051f1e917e45a5 ]
Downstream driver appears to not support preemption on A510 target,
trying to use one make device slow and fill log with rings related errors.
Set num_rings to 1 to disable preemption.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: e20c9284c8f2 ("drm/msm/adreno: Add support for Adreno 510 GPU")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/526898/
Link: https://lore.kernel.org/r/20230314221757.13096-1-a39.skl@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Mon Feb 27 13:06:59 2023 +0300
drm: rcar-du: Fix a NULL vs IS_ERR() bug
[ Upstream commit 40f43730f43699ce8557e4fe59622d4f4b69f44a ]
The drmm_encoder_alloc() function returns error pointers. It never
returns NULL. Fix the check accordingly.
Fixes: 7a1adbd23990 ("drm: rcar-du: Use drmm_encoder_alloc() to manage encoder")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Date: Sat Feb 11 09:17:28 2023 +0800
EDAC/skx: Fix overflows on the DRAM row address mapping arrays
[ Upstream commit 71b1e3ba3fed5a34c5fac6d3a15c2634b04c1eb7 ]
The current DRAM row address mapping arrays skx_{open,close}_row[]
only support ranks with sizes up to 16G. Decoding a rank address
to a DRAM row address for a 32G rank by using either one of the
above arrays by the skx_edac driver, will result in an overflow on
the array.
For a 32G rank, the most significant DRAM row address bit (the
bit17) is mapped from the bit34 of the rank address. Add this new
mapping item to both arrays to fix the overflow issue.
Fixes: 4ec656bdf43a ("EDAC, skx_edac: Add EDAC driver for Skylake")
Reported-by: Feng Xu <feng.f.xu@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230211011728.71764-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jingbo Xu <jefflexu@linux.alibaba.com>
Date: Fri Apr 14 14:18:10 2023 +0800
erofs: fix potential overflow calculating xattr_isize
[ Upstream commit 1b3567a1969b26f709d82a874498c0754ea841c3 ]
Given on-disk i_xattr_icount is 16 bits and xattr_isize is calculated
from i_xattr_icount multiplying 4, xattr_isize has a theoretical maximum
of 256K (64K * 4).
Thus declare xattr_isize as unsigned int to avoid the potential overflow.
Fixes: bfb8674dc044 ("staging: erofs: add erofs in-memory stuffs")
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230414061810.6479-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jingbo Xu <jefflexu@linux.alibaba.com>
Date: Fri Apr 7 22:17:05 2023 +0800
erofs: initialize packed inode after root inode is assigned
[ Upstream commit cb9bce79514392a9a216ff67148e05e2d72c28bd ]
As commit 8f7acdae2cd4 ("staging: erofs: kill all failure handling in
fill_super()"), move the initialization of packed inode after root
inode is assigned, so that the iput() in .put_super() is adequate as
the failure handling.
Otherwise, iput() is also needed in .kill_sb(), in case of the mounting
fails halfway.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Fixes: b15b2e307c3a ("erofs: support on-disk compressed fragments data")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230407141710.113882-3-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gao Xiang <xiang@kernel.org>
Date: Tue Apr 11 01:37:14 2023 +0800
erofs: stop parsing non-compact HEAD index if clusterofs is invalid
[ Upstream commit cc4efd3dd2ac9f89143e5d881609747ecff04164 ]
Syzbot generated a crafted image [1] with a non-compact HEAD index of
clusterofs 33024 while valid numbers should be 0 ~ lclustersize-1,
which causes the following unexpected behavior as below:
BUG: unable to handle page fault for address: fffff52101a3fff9
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 23ffed067 P4D 23ffed067 PUD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 4398 Comm: kworker/u5:1 Not tainted 6.3.0-rc6-syzkaller-g09a9639e56c0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
Workqueue: erofs_worker z_erofs_decompressqueue_work
RIP: 0010:z_erofs_decompress_queue+0xb7e/0x2b40
...
Call Trace:
<TASK>
z_erofs_decompressqueue_work+0x99/0xe0
process_one_work+0x8f6/0x1170
worker_thread+0xa63/0x1210
kthread+0x270/0x300
ret_from_fork+0x1f/0x30
Note that normal images or images using compact indexes are not
impacted. Let's fix this now.
[1] https://lore.kernel.org/r/000000000000ec75b005ee97fbaa@google.com
Reported-and-tested-by: syzbot+aafb3f37cfeb6534c4ac@syzkaller.appspotmail.com
Fixes: 02827e1796b3 ("staging: erofs: add erofs_map_blocks_iter")
Fixes: 152a333a5895 ("staging: erofs: add compacted compression indexes support")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230410173714.104604-1-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhihao Cheng <chengzhihao1@huawei.com>
Date: Tue Mar 21 09:37:21 2023 +0800
ext4: fix i_disksize exceeding i_size problem in paritally written case
[ Upstream commit 1dedde690303c05ef732b7c5c8356fdf60a4ade3 ]
It is possible for i_disksize can exceed i_size, triggering a warning.
generic_perform_write
copied = iov_iter_copy_from_user_atomic(len) // copied < len
ext4_da_write_end
| ext4_update_i_disksize
| new_i_size = pos + copied;
| WRITE_ONCE(EXT4_I(inode)->i_disksize, newsize) // update i_disksize
| generic_write_end
| copied = block_write_end(copied, len) // copied = 0
| if (unlikely(copied < len))
| if (!PageUptodate(page))
| copied = 0;
| if (pos + copied > inode->i_size) // return false
if (unlikely(copied == 0))
goto again;
if (unlikely(iov_iter_fault_in_readable(i, bytes))) {
status = -EFAULT;
break;
}
We get i_disksize greater than i_size here, which could trigger WARNING
check 'i_size_read(inode) < EXT4_I(inode)->i_disksize' while doing dio:
ext4_dio_write_iter
iomap_dio_rw
__iomap_dio_rw // return err, length is not aligned to 512
ext4_handle_inode_extension
WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize) // Oops
WARNING: CPU: 2 PID: 2609 at fs/ext4/file.c:319
CPU: 2 PID: 2609 Comm: aa Not tainted 6.3.0-rc2
RIP: 0010:ext4_file_write_iter+0xbc7
Call Trace:
vfs_write+0x3b1
ksys_write+0x77
do_syscall_64+0x39
Fix it by updating 'copied' value before updating i_disksize just like
ext4_write_inline_data_end() does.
A reproducer can be found in the buganizer link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217209
Fixes: 64769240bd07 ("ext4: Add delayed allocation support in data=writeback mode")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230321013721.89818-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ye Bin <yebin10@huawei.com>
Date: Thu Apr 6 11:16:27 2023 +0000
ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline
[ Upstream commit 835659598c67907b98cd2aa57bb951dfaf675c69 ]
Syzbot found the following issue:
loop0: detected capacity change from 0 to 2048
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
==================================================================
BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
Read of size 4 at addr ffff888073644750 by task syz-executor420/5067
CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:306
print_report+0x107/0x1f0 mm/kasan/report.c:417
kasan_report+0xcd/0x100 mm/kasan/report.c:517
ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809
ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline]
ext4_da_map_blocks fs/ext4/inode.c:1806 [inline]
ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870
ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098
ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082
generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285
ext4_file_write_iter+0x1d0/0x18f0
call_write_iter include/linux/fs.h:2186 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x7dc/0xc50 fs/read_write.c:584
ksys_write+0x177/0x2a0 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f4b7a9737b9
RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9
RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004
RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Above issue is happens when enable bigalloc and inline data feature. As
commit 131294c35ed6 fixed delayed allocation bug in ext4_clu_mapped for
bigalloc + inline. But it only resolved issue when has inline data, if
inline data has been converted to extent(ext4_da_convert_inline_data_to_extent)
before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However
i_data is still store inline data in this scene. Then will trigger UAF
when find extent.
To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)"
in ext4_clu_mapped().
Fixes: 131294c35ed6 ("ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline")
Reported-by: syzbot+bf4bb7731ef73b83a3b4@syzkaller.appspotmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Tested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20230406111627.1916759-1-tudor.ambarus@linaro.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jaegeuk Kim <jaegeuk@kernel.org>
Date: Tue Mar 21 15:58:04 2023 -0700
f2fs: apply zone capacity to all zone type
[ Upstream commit 0b37ed21e3367539b79284e0b0af2246ffcf0dca ]
If we manage the zone capacity per zone type, it'll break the GC assumption.
And, the current logic complains valid block count mismatch.
Let's apply zone capacity to all zone type, if specified.
Fixes: de881df97768 ("f2fs: support zone capacity less than zone size")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yangtao Li <frank.li@vivo.com>
Date: Tue Mar 21 01:22:18 2023 +0800
f2fs: compress: fix to call f2fs_wait_on_page_writeback() in f2fs_write_raw_pages()
[ Upstream commit babedcbac164cec970872b8097401ca913a80e61 ]
BUG_ON() will be triggered when writing files concurrently,
because the same page is writtenback multiple times.
1597 void folio_end_writeback(struct folio *folio)
1598 {
......
1618 if (!__folio_end_writeback(folio))
1619 BUG();
......
1625 }
kernel BUG at mm/filemap.c:1619!
Call Trace:
<TASK>
f2fs_write_end_io+0x1a0/0x370
blk_update_request+0x6c/0x410
blk_mq_end_request+0x15/0x130
blk_complete_reqs+0x3c/0x50
__do_softirq+0xb8/0x29b
? sort_range+0x20/0x20
run_ksoftirqd+0x19/0x20
smpboot_thread_fn+0x10b/0x1d0
kthread+0xde/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Below is the concurrency scenario:
[Process A] [Process B] [Process C]
f2fs_write_raw_pages()
- redirty_page_for_writepage()
- unlock page()
f2fs_do_write_data_page()
- lock_page()
- clear_page_dirty_for_io()
- set_page_writeback() [1st writeback]
.....
- unlock page()
generic_perform_write()
- f2fs_write_begin()
- wait_for_stable_page()
- f2fs_write_end()
- set_page_dirty()
- lock_page()
- f2fs_do_write_data_page()
- set_page_writeback() [2st writeback]
This problem was introduced by the previous commit 7377e853967b ("f2fs:
compress: fix potential deadlock of compress file"). All pagelocks were
released in f2fs_write_raw_pages(), but whether the page was
in the writeback state was ignored in the subsequent writing process.
Let's fix it by waiting for the page to writeback before writing.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Fixes: 7377e853967b ("f2fs: compress: fix potential deadlock of compress file")
Signed-off-by: Qi Han <hanqi@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qilin Tan <qilin.tan@mediatek.com>
Date: Fri Mar 31 17:26:56 2023 +0800
f2fs: fix iostat lock protection
[ Upstream commit 144f1cd40bf91fb3ac1d41806470756ce774f389 ]
Made iostat lock irq safe to avoid potentinal deadlock.
Deadlock scenario:
f2fs_attr_store
-> f2fs_sbi_store
-> _sbi_store
-> spin_lock(sbi->iostat_lock)
<interrupt request>
-> scsi_end_request
-> bio_endio
-> f2fs_dio_read_end_io
-> f2fs_update_iostat
-> spin_lock_irqsave(sbi->iostat_lock) ===> Dead lock here
Fixes: 61803e984307 ("f2fs: fix iostat related lock protection")
Fixes: a1e09b03e6f5 ("f2fs: use iomap for direct I/O")
Signed-off-by: Qilin Tan <qilin.tan@mediatek.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jaegeuk Kim <jaegeuk@kernel.org>
Date: Thu Mar 23 15:37:54 2023 -0700
f2fs: fix scheduling while atomic in decompression path
[ Upstream commit 1aa161e43106d46ca8e9a86f4aa28d420258134b ]
[ 16.945668][ C0] Call trace:
[ 16.945678][ C0] dump_backtrace+0x110/0x204
[ 16.945706][ C0] dump_stack_lvl+0x84/0xbc
[ 16.945735][ C0] __schedule_bug+0xb8/0x1ac
[ 16.945756][ C0] __schedule+0x724/0xbdc
[ 16.945778][ C0] schedule+0x154/0x258
[ 16.945793][ C0] bit_wait_io+0x48/0xa4
[ 16.945808][ C0] out_of_line_wait_on_bit+0x114/0x198
[ 16.945824][ C0] __sync_dirty_buffer+0x1f8/0x2e8
[ 16.945853][ C0] __f2fs_commit_super+0x140/0x1f4
[ 16.945881][ C0] f2fs_commit_super+0x110/0x28c
[ 16.945898][ C0] f2fs_handle_error+0x1f4/0x2f4
[ 16.945917][ C0] f2fs_decompress_cluster+0xc4/0x450
[ 16.945942][ C0] f2fs_end_read_compressed_page+0xc0/0xfc
[ 16.945959][ C0] f2fs_handle_step_decompress+0x118/0x1cc
[ 16.945978][ C0] f2fs_read_end_io+0x168/0x2b0
[ 16.945993][ C0] bio_endio+0x25c/0x2c8
[ 16.946015][ C0] dm_io_dec_pending+0x3e8/0x57c
[ 16.946052][ C0] clone_endio+0x134/0x254
[ 16.946069][ C0] bio_endio+0x25c/0x2c8
[ 16.946084][ C0] blk_update_request+0x1d4/0x478
[ 16.946103][ C0] scsi_end_request+0x38/0x4cc
[ 16.946129][ C0] scsi_io_completion+0x94/0x184
[ 16.946147][ C0] scsi_finish_command+0xe8/0x154
[ 16.946164][ C0] scsi_complete+0x90/0x1d8
[ 16.946181][ C0] blk_done_softirq+0xa4/0x11c
[ 16.946198][ C0] _stext+0x184/0x614
[ 16.946214][ C0] __irq_exit_rcu+0x78/0x144
[ 16.946234][ C0] handle_domain_irq+0xd4/0x154
[ 16.946260][ C0] gic_handle_irq.33881+0x5c/0x27c
[ 16.946281][ C0] call_on_irq_stack+0x40/0x70
[ 16.946298][ C0] do_interrupt_handler+0x48/0xa4
[ 16.946313][ C0] el1_interrupt+0x38/0x68
[ 16.946346][ C0] el1h_64_irq_handler+0x20/0x30
[ 16.946362][ C0] el1h_64_irq+0x78/0x7c
[ 16.946377][ C0] finish_task_switch+0xc8/0x3d8
[ 16.946394][ C0] __schedule+0x600/0xbdc
[ 16.946408][ C0] preempt_schedule_common+0x34/0x5c
[ 16.946423][ C0] preempt_schedule+0x44/0x48
[ 16.946438][ C0] process_one_work+0x30c/0x550
[ 16.946456][ C0] worker_thread+0x414/0x8bc
[ 16.946472][ C0] kthread+0x16c/0x1e0
[ 16.946486][ C0] ret_from_fork+0x10/0x20
Fixes: bff139b49d9f ("f2fs: handle decompress only post processing in softirq")
Fixes: 95fa90c9e5a7 ("f2fs: support recording errors into superblock")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Mon Apr 10 10:14:02 2023 +0800
f2fs: fix to avoid use-after-free for cached IPU bio
[ Upstream commit 5cdb422c839134273866208dad5360835ddb9794 ]
xfstest generic/019 reports a bug:
kernel BUG at mm/filemap.c:1619!
RIP: 0010:folio_end_writeback+0x8a/0x90
Call Trace:
end_page_writeback+0x1c/0x60
f2fs_write_end_io+0x199/0x420
bio_endio+0x104/0x180
submit_bio_noacct+0xa5/0x510
submit_bio+0x48/0x80
f2fs_submit_write_bio+0x35/0x300
f2fs_submit_merged_ipu_write+0x2a0/0x2b0
f2fs_write_single_data_page+0x838/0x8b0
f2fs_write_cache_pages+0x379/0xa30
f2fs_write_data_pages+0x30c/0x340
do_writepages+0xd8/0x1b0
__writeback_single_inode+0x44/0x370
writeback_sb_inodes+0x233/0x4d0
__writeback_inodes_wb+0x56/0xf0
wb_writeback+0x1dd/0x2d0
wb_workfn+0x367/0x4a0
process_one_work+0x21d/0x430
worker_thread+0x4e/0x3c0
kthread+0x103/0x130
ret_from_fork+0x2c/0x50
The root cause is: after cp_error is set, f2fs_submit_merged_ipu_write()
in f2fs_write_single_data_page() tries to flush IPU bio in cache, however
f2fs_submit_merged_ipu_write() missed to check validity of @bio parameter,
result in submitting random cached bio which belong to other IO context,
then it will cause use-after-free issue, fix it by adding additional
validity check.
Fixes: 0b20fcec8651 ("f2fs: cache global IPU bio")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Wed Apr 5 22:44:53 2023 +0800
f2fs: fix to check return value of f2fs_do_truncate_blocks()
[ Upstream commit b851ee6ba3cc212641e622ebcf92b950c7bafa07 ]
Otherwise, if truncation on cow_inode failed, remained data may
pollute current transaction of atomic write.
Cc: Daeho Jeong <daehojeong@google.com>
Fixes: a46bebd502fe ("f2fs: synchronize atomic write aborts")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Wed Apr 5 22:45:36 2023 +0800
f2fs: fix to check return value of inc_valid_block_count()
[ Upstream commit 935fc6fa6466cf18dd72dd1518ebc7bfc4cd58a4 ]
In __replace_atomic_write_block(), we missed to check return value
of inc_valid_block_count(), for extreme testcase that f2fs image is
run out of space, it may cause inconsistent status in between SIT
table and total valid block count.
Cc: Daeho Jeong <daehojeong@google.com>
Fixes: 3db1de0e582c ("f2fs: change the current atomic write way")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yonggil Song <yonggil.song@samsung.com>
Date: Thu Feb 16 16:13:50 2023 +0900
f2fs: fix uninitialized skipped_gc_rwsem
[ Upstream commit c17caf0ba3aa3411b96c71b4ce24be1040b8f3e8 ]
When f2fs skipped a gc round during victim migration, there was a bug which
would skip all upcoming gc rounds unconditionally because skipped_gc_rwsem
was not initialized. It fixes the bug by correctly initializing the
skipped_gc_rwsem inside the gc loop.
Fixes: 6f8d4455060d ("f2fs: avoid fi->i_gc_rwsem[WRITE] lock in f2fs_gc")
Signed-off-by: Yonggil Song <yonggil.song@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yangtao Li <frank.li@vivo.com>
Date: Tue Feb 21 22:45:50 2023 +0800
f2fs: handle dqget error in f2fs_transfer_project_quota()
[ Upstream commit 8051692f5f23260215bfe9a72e712d93606acc5f ]
We should set the error code when dqget() failed.
Fixes: 2c1d03056991 ("f2fs: support F2FS_IOC_FS{GET,SET}XATTR")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Thu Apr 13 21:33:17 2023 +0200
fbdev: mmp: Fix deferred clk handling in mmphw_probe()
[ Upstream commit b3a7a9ab65ae2f2626c7222fb79cdd433f8c5252 ]
When dev_err_probe() is called, 'ret' holds the value of the previous
successful devm_request_irq() call.
'ret' should be assigned with a meaningful value before being used in
dev_err_probe().
While at it, use and return "PTR_ERR(ctrl->clk)" instead of a hard-coded
"-ENOENT" so that -EPROBE_DEFER is handled and propagated correctly.
Fixes: 81b63420564d ("fbdev: mmp: Make use of the helper function dev_err_probe()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cristian Marussi <cristian.marussi@arm.com>
Date: Sun Mar 26 21:34:49 2023 +0100
firmware: arm_scmi: Fix xfers allocation on Rx channel
[ Upstream commit b2ccba9e8cdc6fb3985cc227844e7c6af309ffb1 ]
Two distinct pools of xfer descriptors are allocated at initialization
time: one (Tx) used to provide xfers to track commands and their replies
(or delayed replies) and another (Rx) to pick xfers from to be used for
processing notifications.
Such pools, though, are allocated globally to be used by the whole SCMI
instance, they are not allocated per-channel and as such the allocation of
notifications xfers cannot be simply skipped if no Rx channel was found for
the base protocol common channel, because there could be defined more
optional per-protocol dedicated channels that instead support Rx channels.
Change the conditional check to skip allocation for the notification pool
only if no Rx channel has been detected on any per-channel protocol at all.
Fixes: 4ebd8f6dea81 ("firmware: arm_scmi: Add receive buffer support for notifications")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230326203449.3492948-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mukesh Ojha <quic_mojha@quicinc.com>
Date: Thu Mar 16 20:44:26 2023 +0530
firmware: qcom_scm: Clear download bit during reboot
[ Upstream commit 781d32d1c9709fd25655c4e3e3e15370ae4ae4db ]
During normal restart of a system download bit should
be cleared irrespective of whether download mode is
set or not.
Fixes: 8c1b7dc9ba22 ("firmware: qcom: scm: Expose download-mode control")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1678979666-551-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Wed Apr 19 17:27:03 2023 +0300
firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe
[ Upstream commit e1d6ca042e62c2a69513235f8629eb6e62ca79c5 ]
The svc_create_memory_pool() function returns error pointers. It never
returns NULL. Fix the check.
Fixes: 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/5f9a8cb4-5a4f-460b-9cdc-2fae6c5b7922@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marco Pagani <marpagan@redhat.com>
Date: Wed Mar 1 15:03:08 2023 +0100
fpga: bridge: fix kernel-doc parameter description
[ Upstream commit 7ef1a2c1c9dffa177ecc3ea50b7f5ee63a621137 ]
Fix the kernel-doc description for the "struct fpga_image_info *info"
parameter of the fpga_bridge_get() function.
Fixes: 060ac5c8fa7b ("fpga: bridge: kernel-doc fixes")
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230301140309.512578-1-marpagan@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Date: Wed Nov 23 16:48:46 2022 +0800
fs/ntfs3: Add check for kmemdup
[ Upstream commit e6c3cef24cb0d045f99d5cb039b344874e3cfd74 ]
Since the kmemdup may return NULL pointer,
it should be better to add check for the return value
in order to avoid NULL pointer dereference.
Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen Zhongjin <chenzhongjin@huawei.com>
Date: Tue Nov 22 17:24:14 2022 +0800
fs/ntfs3: Fix memory leak if ntfs_read_mft failed
[ Upstream commit bfa434c60157c9793e9b12c9b68ade02aff9f803 ]
Label ATTR_ROOT in ntfs_read_mft() sets is_root = true and
ni->ni_flags |= NI_FLAG_DIR, then next attr will goto label ATTR_ALLOC
and alloc ni->dir.alloc_run. However two states are not always
consistent and can make memory leak.
1) attr_name in ATTR_ROOT does not fit the condition it will set
is_root = true but NI_FLAG_DIR is not set.
2) next attr_name in ATTR_ALLOC fits the condition and alloc
ni->dir.alloc_run
3) in cleanup function ni_clear(), when NI_FLAG_DIR is set, it frees
ni->dir.alloc_run, otherwise it frees ni->file.run
4) because NI_FLAG_DIR is not set in this case, ni->dir.alloc_run is
leaked as kmemleak reported:
unreferenced object 0xffff888003bc5480 (size 64):
backtrace:
[<000000003d42e6b0>] __kmalloc_node+0x4e/0x1c0
[<00000000d8e19b8a>] kvmalloc_node+0x39/0x1f0
[<00000000fc3eb5b8>] run_add_entry+0x18a/0xa40 [ntfs3]
[<0000000011c9f978>] run_unpack+0x75d/0x8e0 [ntfs3]
[<00000000e7cf1819>] run_unpack_ex+0xbc/0x500 [ntfs3]
[<00000000bbf0a43d>] ntfs_iget5+0xb25/0x2dd0 [ntfs3]
[<00000000a6e50693>] ntfs_fill_super+0x218d/0x3580 [ntfs3]
[<00000000b9170608>] get_tree_bdev+0x3fb/0x710
[<000000004833798a>] vfs_get_tree+0x8e/0x280
[<000000006e20b8e6>] path_mount+0xf3c/0x1930
[<000000007bf15a5f>] do_mount+0xf3/0x110
...
Fix this by always setting is_root and NI_FLAG_DIR together.
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: ZhangPeng <zhangpeng362@huawei.com>
Date: Wed Dec 7 09:46:10 2022 +0000
fs/ntfs3: Fix OOB read in indx_insert_into_buffer
[ Upstream commit b8c44949044e5f7f864525fdffe8e95135ce9ce5 ]
Syzbot reported a OOB read bug:
BUG: KASAN: slab-out-of-bounds in indx_insert_into_buffer+0xaa3/0x13b0
fs/ntfs3/index.c:1755
Read of size 17168 at addr ffff8880255e06c0 by task syz-executor308/3630
Call Trace:
<TASK>
memmove+0x25/0x60 mm/kasan/shadow.c:54
indx_insert_into_buffer+0xaa3/0x13b0 fs/ntfs3/index.c:1755
indx_insert_entry+0x446/0x6b0 fs/ntfs3/index.c:1863
ntfs_create_inode+0x1d3f/0x35c0 fs/ntfs3/inode.c:1548
ntfs_create+0x3e/0x60 fs/ntfs3/namei.c:100
lookup_open fs/namei.c:3413 [inline]
If the member struct INDEX_BUFFER *index of struct indx_node is
incorrect, that is, the value of __le32 used is greater than the value
of __le32 total in struct INDEX_HDR. Therefore, OOB read occurs when
memmove is called in indx_insert_into_buffer().
Fix this by adding a check in hdr_find_e().
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Reported-by: syzbot+d882d57193079e379309@syzkaller.appspotmail.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zeng Heng <zengheng4@huawei.com>
Date: Mon Dec 12 09:31:34 2022 +0800
fs/ntfs3: Fix slab-out-of-bounds read in hdr_delete_de()
[ Upstream commit ab84eee4c7ab929996602eda7832854c35a6dda2 ]
Here is a BUG report from syzbot:
BUG: KASAN: slab-out-of-bounds in hdr_delete_de+0xe0/0x150 fs/ntfs3/index.c:806
Read of size 16842960 at addr ffff888079cc0600 by task syz-executor934/3631
Call Trace:
memmove+0x25/0x60 mm/kasan/shadow.c:54
hdr_delete_de+0xe0/0x150 fs/ntfs3/index.c:806
indx_delete_entry+0x74f/0x3670 fs/ntfs3/index.c:2193
ni_remove_name+0x27a/0x980 fs/ntfs3/frecord.c:2910
ntfs_unlink_inode+0x3d4/0x720 fs/ntfs3/inode.c:1712
ntfs_rename+0x41a/0xcb0 fs/ntfs3/namei.c:276
Before using the meta-data in struct INDEX_HDR, we need to
check index header valid or not. Otherwise, the corruptedi
(or malicious) fs image can cause out-of-bounds access which
could make kernel panic.
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Reported-by: syzbot+9c2811fd56591639ff5f@syzkaller.appspotmail.com
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Aring <aahringo@redhat.com>
Date: Mon Mar 6 15:48:08 2023 -0500
fs: dlm: fix DLM_IFL_CB_PENDING gets overwritten
commit a034c1370ded2ae6cbdc73a78241b3ed98c86d3d upstream.
This patch introduce a new internal flag per lkb value to handle
internal flags which are handled not on wire. The current lkb internal
flags stored as lkb->lkb_flags are split in upper and lower bits, the
lower bits are used to share internal flags over wire for other cluster
wide lkb copies on other nodes.
In commit 61bed0baa4db ("fs: dlm: use a non-static queue for callbacks")
we introduced a new internal flag for pending callbacks for the dlm
callback queue. This flag is protected by the lkb->lkb_cb_lock lock.
This patch overlooked that on dlm receive path and the mentioned upper
and lower bits, that dlm will read the flags, mask it and write it
back. As example receive_flags() in fs/dlm/lock.c. This flag
manipulation is not done atomically and is not protected by
lkb->lkb_cb_lock. This has unknown side effects of the current callback
handling.
In future we should move to set/clear/test bit functionality and avoid
read, mask and writing back flag values. In later patches we will move
the upper parts to the new introduced internal lkb flags which are not
shared between other cluster nodes to the new non shared internal flag
field to avoid similar issues.
Cc: stable@vger.kernel.org
Fixes: 61bed0baa4db ("fs: dlm: use a non-static queue for callbacks")
Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kefeng Wang <wangkefeng.wang@huawei.com>
Date: Fri Mar 31 16:45:02 2023 +0800
fs: fix sysctls.c built
commit e3184de9d46c2eebdb776face2e2662c6733331d upstream.
'obj-$(CONFIG_SYSCTL) += sysctls.o' must be moved after "obj-y :=",
or it won't be built as it is overwrited.
Note that there is nothing that is going to break by linking
sysctl.o later, we were just being way to cautious and patches
have been updated to reflect these considerations and sent for
stable as well with the whole "base" stuff needing to be linked
prior to child sysctl tables that use that directory. All of
the kernel sysctl APIs always share the same directory, and races
against using it should end up re-using the same single created
directory.
And so something we can do eventually is do away with all the base stuff.
For now it's fine, it's not creating an issue. It is just a bit pedantic
and careful.
Fixes: ab171b952c6e ("fs: move namespace sysctls and declare fs base directory")
Cc: stable@vger.kernel.org # v5.17
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[mcgrof: enhanced commit log for stable criteria and clarify base stuff ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yang Yingliang <yangyingliang@huawei.com>
Date: Sat Nov 26 15:33:15 2022 +0800
gpu: host1x: Fix memory leak of device names
[ Upstream commit 55879dad0f3ae8468444b42f785ad79eac05fe5b ]
The device names allocated by dev_set_name() need be freed
before module unloading, but they can not be freed because
the kobject's refcount which was set in device_initialize()
has not be decreased to 0.
As comment of device_add() says, if it fails, use only
put_device() drop the refcount, then the name will be
freed in kobejct_cleanup().
device_del() and put_device() can be replaced with
device_unregister(), so call it to unregister the added
successfully devices, and just call put_device() to the
not added device.
Add a release() function to device to avoid null release()
function WARNING in device_release(), it's empty, because
the context devices are freed together in
host1x_memory_context_list_free().
Fixes: 8aa5bcb61612 ("gpu: host1x: Add context device management code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yang Yingliang <yangyingliang@huawei.com>
Date: Sat Nov 26 15:33:14 2022 +0800
gpu: host1x: Fix potential double free if IOMMU is disabled
[ Upstream commit 8466ff24a37a9a18fb935e90dda64f049131ae28 ]
If context device has no IOMMU, the 'cdl->devs' is freed in
error path, but host1x_memory_context_list_init() doesn't
return an error code, so the module can be loaded successfully,
when it's unloading, the host1x_memory_context_list_free() is
called in host1x_remove(), it will cause double free. Set the
'cdl->devs' to NULL after freeing it to avoid double free.
Fixes: 8aa5bcb61612 ("gpu: host1x: Add context device management code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Date: Tue Apr 11 21:40:27 2023 +0530
HID: amd_sfh: Add support for shutdown operation
[ Upstream commit 1353ecaf1830d6d1b74f3225378a9498b4e14fdd ]
As soon as the system is booted after shutdown, the sensors may remain in
a weird state and fail to initialize. Therefore, all sensors should be
turned off during shutdown.
Fixes: 4f567b9f8141 ("SFH: PCIe driver to add support of AMD sensor fusion hub")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Date: Tue Apr 11 21:40:25 2023 +0530
HID: amd_sfh: Correct the sensor enable and disable command
[ Upstream commit 0b9255bf11baa61cd526e6bd24d6c8e6d1eabf8d ]
In order to start or stop sensors, the firmware command needs to be
changed to add an additional default subcommand value. For this reason,
add a subcommand value to enable or disable sensors accordingly.
Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Date: Tue Apr 11 21:40:28 2023 +0530
HID: amd_sfh: Correct the stop all command
[ Upstream commit 82c2a0d137794f5ef47982231593a00aee26ce3b ]
Misinterpreted the stop all command in SHF1.1 firmware. Therefore, it is
necessary to update the stop all command accordingly to disable all
sensors.
Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Date: Tue Apr 11 21:40:24 2023 +0530
HID: amd_sfh: Correct the structure fields
[ Upstream commit 7e7fdab79899f62de39c9280fb78f3d3b02ac207 ]
Misinterpreted sfh_cmd_base structure member fields. Therefore, adjust
the structure member fields accordingly to reflect functionality.
Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Date: Tue Apr 11 21:40:26 2023 +0530
HID: amd_sfh: Fix illuminance value
[ Upstream commit a33e5e393171ae8384d3381db5cd159ba877cfcb ]
Illuminance value is actually 32 bits, but is incorrectly trancated to
16 bits. Hence convert to integer illuminace accordingly to reflect
correct values.
Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Date: Tue Apr 11 21:40:30 2023 +0530
HID: amd_sfh: Handle "no sensors" enabled for SFH1.1
[ Upstream commit 8455cbb25927013b3417ab619dced1c0e87708af ]
Based on num_hid_devices, each sensor device is initialized. If
"no sensors" is initialized, amd_sfh work initialization and scheduling
doesn’t make sense and returns EOPNOTSUPP to stop driver probe. Hence,
add a check for "no sensors" enabled to handle the special case.
Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Date: Tue Apr 11 21:40:29 2023 +0530
HID: amd_sfh: Increase sensor command timeout for SFH1.1
[ Upstream commit 571dc8f59dd477037bb5a029e8d1b5a4a4d9dd63 ]
The initialization of SFH1.1 sensors may take some time. Hence, increase
sensor command timeouts in order to obtain status responses within a
maximum timeout.
Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Wed Apr 19 17:30:00 2023 +0300
hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id()
[ Upstream commit e078180d66848a6a890daf0a3ce28dc43cc66790 ]
The "map_sz" is the number of elements in the "m" array so the >
comparison needs to be changed to >= to prevent an out of bounds
read.
Fixes: 09574cca6ad6 ("hte: Add Tegra194 HTE kernel provider")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnd Bergmann <arnd@arndb.de>
Date: Thu Dec 15 17:46:19 2022 +0100
hte: tegra: fix 'struct of_device_id' build error
[ Upstream commit 6680c835ada1b34e882d0a32612f7294c62e27e0 ]
Without the extra #include, this driver produces a build failure
in some configurations.
drivers/hte/hte-tegra194-test.c:96:34: error: array type has incomplete element type 'struct of_device_id'
96 | static const struct of_device_id tegra_hte_test_of_match[] = {
Fixes: 9a75a7cd03c9 ("hte: Add Tegra HTE test driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chris Packham <chris.packham@alliedtelesis.co.nz>
Date: Wed Apr 19 11:36:55 2023 +1200
hwmon: (adt7475) Use device_property APIs when configuring polarity
commit 2a8e41ad337508fc5d598c0f9288890214f8e318 upstream.
On DT unaware platforms of_property_read_u32_array() returns -ENOSYS
which wasn't handled by the code treating adi,pwm-active-state as
optional. Update the code to use device_property_read_u32_array() which
deals gracefully with DT unaware platforms.
Fixes: 86da28eed4fb ("hwmon: (adt7475) Add support for inverting pwm output")
Reported-by: Mariusz Białończyk <manio@skyboo.net>
Link: https://lore.kernel.org/linux-hwmon/52e26a67-9131-2dc0-40cb-db5c07370027@alliedtelesis.co.nz/T/#mdd0505801e0a4e72340de009a47c0fca4f771ed3
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20230418233656.869055-2-chris.packham@alliedtelesis.co.nz
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Babu Moger <Babu.Moger@amd.com>
Date: Thu Apr 13 16:39:58 2023 -0500
hwmon: (k10temp) Check range scale when CUR_TEMP register is read-write
commit 0c072385348e3ac5229145644055d3e2afb5b3db upstream.
Spec says, when CUR_TEMP_TJ_SEL == 3 and CUR_TEMP_RANGE_SEL == 0,
it should use RangeUnadjusted is 0, which is (CurTmp*0.125 -49) C. The
CUR_TEMP register is read-write when CUR_TEMP_TJ_SEL == 3 (bit 17-16).
Add the check to detect it.
Sensors command's output before the patch.
$sensors
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +76.6°C <- Wrong value
Tccd1: +26.5°C
Tccd2: +27.5°C
Tccd3: +27.2°C
Tccd4: +27.5°C
Tccd5: +26.0°C
Tccd6: +26.2°C
Tccd7: +25.0°C
Tccd8: +26.5°C
Sensors command's output after the patch.
$sensors
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +28.8°C <- corrected value
Tccd1: +27.5°C
Tccd2: +28.5°C
Tccd3: +28.5°C
Tccd4: +28.5°C
Tccd5: +27.0°C
Tccd6: +27.5°C
Tccd7: +27.0°C
Tccd8: +27.5°C
Signed-off-by: Babu Moger <babu.moger@amd.com>
Fixes: 1b59788979ac ("hwmon: (k10temp) Add temperature offset for Ryzen 2700X")
Link: https://lore.kernel.org/r/20230413213958.847634-1-babu.moger@amd.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tomáš Pecka <tomas.pecka@cesnet.cz>
Date: Thu Apr 20 19:19:39 2023 +0200
hwmon: (pmbus/fsp-3y) Fix functionality bitmask in FSP-3Y YM-2151E
[ Upstream commit 93822f5161a2dc57a60b95b35b3cb8589f53413e ]
The bit flags in pmbus_driver_info functionality for YM-2151E chip were
joined with a comma operator instead of a bitwise OR. This means that
the last constant PMBUS_HAVE_IIN was not OR-ed with the other
PM_BUS_HAVE_* constants for this page but it initialized the next element
of the func array (which was not accessed from anywhere because of the
number of pages).
However, there is no need for setting PMBUS_HAVE_IIN in the 5Vsb page
because this command does not seem to be paged. Obviously, the device
only has one IIN sensor, so it doesn't make sense to query it again from
the second page.
Fixes: 1734b4135a62 ("hwmon: Add driver for fsp-3y PSUs and PDUs")
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Tomáš Pecka <tomas.pecka@cesnet.cz>
Link: https://lore.kernel.org/r/20230420171939.212040-1-tomas.pecka@cesnet.cz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lars-Peter Clausen <lars@metafoo.de>
Date: Thu Apr 13 19:10:21 2023 -0700
i2c: cadence: cdns_i2c_master_xfer(): Fix runtime PM leak on error path
[ Upstream commit ae1664f04f504a998737f5bb563f16b44357bcca ]
The cdns_i2c_master_xfer() function gets a runtime PM reference when the
function is entered. This reference is released when the function is
exited. There is currently one error path where the function exits
directly, which leads to a leak of the runtime PM reference.
Make sure that this error path also releases the runtime PM reference.
Fixes: 1a351b10b967 ("i2c: cadence: Added slave support")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Reid Tonking <reidt@ti.com>
Date: Wed Apr 26 14:49:56 2023 -0500
i2c: omap: Fix standard mode false ACK readings
commit c770657bd2611b077ec1e7b1fe6aa92f249399bd upstream.
Using standard mode, rare false ACK responses were appearing with
i2cdetect tool. This was happening due to NACK interrupt triggering
ISR thread before register access interrupt was ready. Removing the
NACK interrupt's ability to trigger ISR thread lets register access
ready interrupt do this instead.
Cc: <stable@vger.kernel.org> # v3.7+
Fixes: 3b2f8f82dad7 ("i2c: omap: switch to threaded IRQ support")
Signed-off-by: Reid Tonking <reidt@ti.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lars-Peter Clausen <lars@metafoo.de>
Date: Thu Apr 13 19:10:22 2023 -0700
i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path
[ Upstream commit d663d93bb47e7ab45602b227701022d8aa16040a ]
The xiic_xfer() function gets a runtime PM reference when the function is
entered. This reference is released when the function is exited. There is
currently one error path where the function exits directly, which leads to
a leak of the runtime PM reference.
Make sure that this error path also releases the runtime PM reference.
Fixes: fdacc3c7405d ("i2c: xiic: Switch from waitqueue to completion")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jan Sokolowski <jan.sokolowski@intel.com>
Date: Mon Jan 9 15:11:17 2023 +0100
i40e: Remove string printing for i40e_status
commit 5d968af27a166e055bdd5f832f095d809eadb992 upstream.
Remove the i40e_stat_str() function which prints the string
representation of the i40e_status error code. With upcoming changes
moving away from i40e_status, there will be no need for this function
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jan Sokolowski <jan.sokolowski@intel.com>
Date: Mon Jan 9 15:11:16 2023 +0100
i40e: Remove unused i40e status codes
commit 9d135352bb5d885a7b21417103423301a40c1b8b upstream.
In an effort to remove i40e status codes and replace them
with standard kernel errornums, unused values of i40e_status_code
were removed.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jan Sokolowski <jan.sokolowski@intel.com>
Date: Mon Jan 9 15:11:18 2023 +0100
i40e: use int for i40e_status
commit 5180ff1364bc26c031b54a68a80aa90ce0028b70 upstream.
To prepare for removal of i40e_status, change the variables
from i40e_status to int. This eases the transition when values
are changed to return standard int error codes over enum i40e_status.
As such changes often also change variable orders, a cleanup
is also applied here to make variables conform to RCT and
some lines are also reformatted where applicable.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hugh Dickins <hughd@google.com>
Date: Sun Apr 16 22:17:05 2023 -0700
ia64: fix an addr to taddr in huge_pte_offset()
commit 3647ebcfbfca384840231fe13fae665453238a61 upstream.
I know nothing of ia64 htlbpage_to_page(), but guess that the p4d
line should be using taddr rather than addr, like everywhere else.
Link: https://lkml.kernel.org/r/732eae88-3beb-246-2c72-281de786740@google.com
Fixes: c03ab9e32a2c ("ia64: add support for folded p4d page tables")
Signed-off-by: Hugh Dickins <hughd@google.com
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Wed Feb 22 19:42:58 2023 -0800
ia64: mm/contig: fix section mismatch warning/error
[ Upstream commit 58deeb4ef3b054498747d0929d94ac53ab90981f ]
alloc_per_cpu_data() is called by find_memory(), which is marked as
__init. Therefore alloc_per_cpu_data() can also be marked as __init to
remedy this modpost problem.
WARNING: modpost: vmlinux.o: section mismatch in reference: alloc_per_cpu_data (section: .text) -> memblock_alloc_try_nid (section: .init.text)
Link: https://lkml.kernel.org/r/20230223034258.12917-1-rdunlap@infradead.org
Fixes: 4b9ddc7cf272 ("[IA64] Fix section mismatch in contig.c version of per_cpu_init()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Wed Feb 22 19:43:09 2023 -0800
ia64: salinfo: placate defined-but-not-used warning
[ Upstream commit 0de155752b152d6bcd96b5b5bf20af336abd183a ]
When CONFIG_PROC_FS is not set, proc_salinfo_show() is not used. Mark the
function as __maybe_unused to quieten the warning message.
../arch/ia64/kernel/salinfo.c:584:12: warning: 'proc_salinfo_show' defined but not used [-Wunused-function]
584 | static int proc_salinfo_show(struct seq_file *m, void *v)
| ^~~~~~~~~~~~~~~~~
Link: https://lkml.kernel.org/r/20230223034309.13375-1-rdunlap@infradead.org
Fixes: 3f3942aca6da ("proc: introduce proc_create_single{,_data}")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
Date: Fri Apr 7 12:52:44 2023 -0400
IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests
[ Upstream commit 00cbce5cbf88459cd1aa1d60d0f1df15477df127 ]
hfi1 user SDMA request processing has two bugs that can cause data
corruption for user SDMA requests that have multiple payload iovecs
where an iovec other than the tail iovec does not run up to the page
boundary for the buffer pointed to by that iovec.a
Here are the specific bugs:
1. user_sdma_txadd() does not use struct user_sdma_iovec->iov.iov_len.
Rather, user_sdma_txadd() will add up to PAGE_SIZE bytes from iovec
to the packet, even if some of those bytes are past
iovec->iov.iov_len and are thus not intended to be in the packet.
2. user_sdma_txadd() and user_sdma_send_pkts() fail to advance to the
next iovec in user_sdma_request->iovs when the current iovec
is not PAGE_SIZE and does not contain enough data to complete the
packet. The transmitted packet will contain the wrong data from the
iovec pages.
This has not been an issue with SDMA packets from hfi1 Verbs or PSM2
because they only produce iovecs that end short of PAGE_SIZE as the tail
iovec of an SDMA request.
Fixing these bugs exposes other bugs with the SDMA pin cache
(struct mmu_rb_handler) that get in way of supporting user SDMA requests
with multiple payload iovecs whose buffers do not end at PAGE_SIZE. So
this commit fixes those issues as well.
Here are the mmu_rb_handler bugs that non-PAGE_SIZE-end multi-iovec
payload user SDMA requests can hit:
1. Overlapping memory ranges in mmu_rb_handler will result in duplicate
pinnings.
2. When extending an existing mmu_rb_handler entry (struct mmu_rb_node),
the mmu_rb code (1) removes the existing entry under a lock, (2)
releases that lock, pins the new pages, (3) then reacquires the lock
to insert the extended mmu_rb_node.
If someone else comes in and inserts an overlapping entry between (2)
and (3), insert in (3) will fail.
The failure path code in this case unpins _all_ pages in either the
original mmu_rb_node or the new mmu_rb_node that was inserted between
(2) and (3).
3. In hfi1_mmu_rb_remove_unless_exact(), mmu_rb_node->refcount is
incremented outside of mmu_rb_handler->lock. As a result, mmu_rb_node
could be evicted by another thread that gets mmu_rb_handler->lock and
checks mmu_rb_node->refcount before mmu_rb_node->refcount is
incremented.
4. Related to #2 above, SDMA request submission failure path does not
check mmu_rb_node->refcount before freeing mmu_rb_node object.
If there are other SDMA requests in progress whose iovecs have
pointers to the now-freed mmu_rb_node(s), those pointers to the
now-freed mmu_rb nodes will be dereferenced when those SDMA requests
complete.
Fixes: 7be85676f1d1 ("IB/hfi1: Don't remove RB entry when not needed.")
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/168088636445.3027109.10054635277810177889.stgit@252.162.96.66.static.eigbox.net
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
Date: Fri Apr 7 12:52:39 2023 -0400
IB/hfi1: Fix SDMA mmu_rb_node not being evicted in LRU order
[ Upstream commit 9fe8fec5e43d5a80f43cbf61aaada1b047a1eb61 ]
hfi1_mmu_rb_remove_unless_exact() did not move mmu_rb_node objects in
mmu_rb_handler->lru_list after getting a cache hit on an mmu_rb_node.
As a result, hfi1_mmu_rb_evict() was not guaranteed to evict truly
least-recently used nodes.
This could be a performance issue for an application when that
application:
- Uses some long-lived buffers frequently.
- Uses a large number of buffers once.
- Hits the mmu_rb_handler cache size or pinned-page limits, forcing
mmu_rb_handler cache entries to be evicted.
In this case, the one-time use buffers cause the long-lived buffer
entries to eventually filter to the end of the LRU list where
hfi1_mmu_rb_evict() will consider evicting a frequently-used long-lived
entry instead of evicting one of the one-time use entries.
Fix this by inserting new mmu_rb_node at the tail of
mmu_rb_handler->lru_list and move mmu_rb_ndoe to the tail of
mmu_rb_handler->lru_list when the mmu_rb_node is a hit in
hfi1_mmu_rb_remove_unless_exact(). Change hfi1_mmu_rb_evict() to evict
from the head of mmu_rb_handler->lru_list instead of the tail.
Fixes: 0636e9ab8355 ("IB/hfi1: Add cache evict LRU list")
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/168088635931.3027109.10423156330761536044.stgit@252.162.96.66.static.eigbox.net
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kang Chen <void0red@gmail.com>
Date: Mon Feb 27 18:02:12 2023 +0800
IB/hifi1: add a null check of kzalloc_node in hfi1_ipoib_txreq_init
[ Upstream commit c874ad879c2f29ebe040a34b974389875c0d81eb ]
kzalloc_node may fails, check it and do the cleanup.
Fixes: b1151b74ff68 ("IB/hfi1: Fix alloc failure with larger txqueuelen")
Signed-off-by: Kang Chen <void0red@gmail.com>
Link: https://lore.kernel.org/r/20230227100212.910820-1-void0red@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patrik Dahlström <risca@dalakolonin.se>
Date: Mon Mar 13 21:50:29 2023 +0100
iio: adc: palmas_gpadc: fix NULL dereference on rmmod
[ Upstream commit 49f76c499d38bf67803438eee88c8300d0f6ce09 ]
Calling dev_to_iio_dev() on a platform device pointer is undefined and
will make adc NULL.
Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Link: https://lore.kernel.org/r/20230313205029.1881745-1-risca@dalakolonin.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: William Breathitt Gray <william.gray@linaro.org>
Date: Thu Apr 6 10:40:10 2023 -0400
iio: addac: stx104: Fix race condition for stx104_write_raw()
commit 9740827468cea80c42db29e7171a50e99acf7328 upstream.
The priv->chan_out_states array and actual DAC value can become
mismatched if stx104_write_raw() is called concurrently. Prevent such a
race condition by utilizing a mutex.
Fixes: 97a445dad37a ("iio: Add IIO support for the DAC on the Apex Embedded Systems STX104")
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/c95c9a77fcef36b2a052282146950f23bbc1ebdc.1680790580.git.william.gray@linaro.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: William Breathitt Gray <william.gray@linaro.org>
Date: Thu Apr 6 10:40:11 2023 -0400
iio: addac: stx104: Fix race condition when converting analog-to-digital
commit 4f9b80aefb9e2f542a49d9ec087cf5919730e1dd upstream.
The ADC conversion procedure requires several device I/O operations
performed in a particular sequence. If stx104_read_raw() is called
concurrently, the ADC conversion procedure could be clobbered. Prevent
such a race condition by utilizing a mutex.
Fixes: 4075a283ae83 ("iio: stx104: Add IIO support for the ADC channels")
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/2ae5e40eed5006ca735e4c12181a9ff5ced65547.1680790580.git.william.gray@linaro.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Mar 12 16:34:28 2023 +0100
iio: light: max44009: add missing OF device matching
[ Upstream commit b29c49026c3c05a11f845dba17cad0b3ba06836d ]
The driver currently matches only via i2c_device_id, but also has
of_device_id table:
drivers/iio/light/max44009.c:545:34: error: ‘max44009_of_match’ defined but not used [-Werror=unused-const-variable=]
Fixes: 6aef699a7d7e ("iio: light: add driver for MAX44009")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312153429.371702-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Thu Feb 23 19:27:03 2023 -0800
IMA: allow/fix UML builds
commit 644f17412f5acf01a19af9d04a921937a2bc86c6 upstream.
UML supports HAS_IOMEM since 0bbadafdc49d (um: allow disabling
NO_IOMEM).
Current IMA build on UML fails on allmodconfig (with TCG_TPM=m):
ld: security/integrity/ima/ima_queue.o: in function `ima_add_template_entry':
ima_queue.c:(.text+0x2d9): undefined reference to `tpm_pcr_extend'
ld: security/integrity/ima/ima_init.o: in function `ima_init':
ima_init.c:(.init.text+0x43f): undefined reference to `tpm_default_chip'
ld: security/integrity/ima/ima_crypto.o: in function `ima_calc_boot_aggregate_tfm':
ima_crypto.c:(.text+0x1044): undefined reference to `tpm_pcr_read'
ld: ima_crypto.c:(.text+0x10d8): undefined reference to `tpm_pcr_read'
Modify the IMA Kconfig entry so that it selects TCG_TPM if HAS_IOMEM
is set, regardless of the UML Kconfig setting.
This updates TCG_TPM from =m to =y and fixes the linker errors.
Fixes: f4a0391dfa91 ("ima: fix Kconfig dependencies")
Cc: Stable <stable@vger.kernel.org> # v5.14+
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Thu Apr 13 23:05:20 2023 -0700
Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe
[ Upstream commit 5bca3688bdbc3b58a2894b8671a8e2378efe28bd ]
rpi_firmware_get() take reference, we need to release it in error paths
as well. Use devm_rpi_firmware_get() helper to handling the resources.
Also remove the existing rpi_firmware_put().
Fixes: 0b9f28fed3f7 ("Input: add official Raspberry Pi's touchscreen driver")
Fixes: 3b8ddff780b7 ("input: raspberrypi-ts: Release firmware handle when not needed")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20221223074657.810346-1-linmq006@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Tue Jan 3 06:57:17 2023 +0200
interconnect: qcom: drop obsolete OSM_L3/EPSS defines
[ Upstream commit 4c4161b4c81b632fc29002c324e996cbb79894e7 ]
Since Qualcomm platforms have switched to the separate OSM_L3/EPSS
driver, old related defines became unused. Drop them now.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Fixes: 4529992c9474 ("interconnect: qcom: osm-l3: Use platform-independent node ids")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230103045717.1079067-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Tue Jan 3 05:11:59 2023 +0200
interconnect: qcom: osm-l3: drop unuserd header inclusion
[ Upstream commit f730038fe6a6de170268fd779b2c029aa70a928b ]
The commit 4529992c9474 ("interconnect: qcom: osm-l3: Use
platform-independent node ids") made osm-l3 driver use
platform-independent IDs, removing the need to include platform headers.
Fixes: 4529992c9474 ("interconnect: qcom: osm-l3: Use platform-independent node ids")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230103031159.1060075-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johan Hovold <johan+linaro@kernel.org>
Date: Mon Mar 13 09:49:53 2023 +0100
interconnect: qcom: rpm: drop bogus pm domain attach
[ Upstream commit 72b2720c18ecde92e6a36c4ac897dd5848e3f379 ]
Any power domain would already have been attached by the platform bus
code so drop the bogus power domain attach which always succeeds from
probe.
This effectively reverts commit 7de109c0abe9 ("interconnect: icc-rpm:
Add support for bus power domain").
Fixes: 7de109c0abe9 ("interconnect: icc-rpm: Add support for bus power domain")
Cc: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # MSM8996 Sony Kagura
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230313084953.24088-3-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pavel Begunkov <asml.silence@gmail.com>
Date: Thu Apr 13 15:28:05 2023 +0100
io_uring/rsrc: use nospec'ed indexes
[ Upstream commit 953c37e066f05a3dca2d74643574b8dfe8a83983 ]
We use array_index_nospec() for registered buffer indexes, but don't use
it while poking into rsrc tags, fix that.
Fixes: 634d00df5e1cf ("io_uring: add full-fledged dynamic buffers support")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f02fafc5a9c0dd69be2b0618c38831c078232ff0.1681395792.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kishon Vijay Abraham I <kvijayab@amd.com>
Date: Wed Apr 5 13:03:17 2023 +0000
iommu/amd: Fix "Guest Virtual APIC Table Root Pointer" configuration in IRTE
commit ccc62b827775915a9b82db42a29813d04f92df7a upstream.
commit b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC
(de-)activation code") while refactoring guest virtual APIC
activation/de-activation code, stored information for activate/de-activate
in "struct amd_ir_data". It used 32-bit integer data type for storing the
"Guest Virtual APIC Table Root Pointer" (ga_root_ptr), though the
"ga_root_ptr" is actually a 40-bit field in IRTE (Interrupt Remapping
Table Entry).
This causes interrupts from PCIe devices to not reach the guest in the case
of PCIe passthrough with SME (Secure Memory Encryption) enabled as _SME_
bit in the "ga_root_ptr" is lost before writing it to the IRTE.
Fix it by using 64-bit data type for storing the "ga_root_ptr". While at
that also change the data type of "ga_tag" to u32 in order to match
the IOMMU spec.
Fixes: b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Cc: stable@vger.kernel.org # v5.4+
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Link: https://lore.kernel.org/r/20230405130317.9351-1-kvijayab@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jerry Snitselaar <jsnitsel@redhat.com>
Date: Tue Apr 4 00:27:42 2023 -0700
iommu/amd: Set page size bitmap during V2 domain allocation
[ Upstream commit 8f880d19e6ad645a4b8066d5ff091c980b3231e7 ]
With the addition of the V2 page table support, the domain page size
bitmap needs to be set prior to iommu core setting up direct mappings
for reserved regions. When reserved regions are mapped, if this is not
done, it will be looking at the V1 page size bitmap when determining
the page size to use in iommu_pgsize(). When it gets into the actual
amd mapping code, a check of see if the page size is supported can
fail, because at that point it is checking it against the V2 page size
bitmap which only supports 4K, 2M, and 1G.
Add a check to __iommu_domain_alloc() to not override the
bitmap if it was already set by the iommu ops domain_alloc() code path.
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Fixes: 4db6c41f0946 ("iommu/amd: Add support for using AMD IOMMU v2 page table for DMA-API")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230404072742.1895252-1-jsnitsel@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yong Wu <yong.wu@mediatek.com>
Date: Thu Mar 16 18:14:45 2023 +0800
iommu/mediatek: Set dma_mask for PGTABLE_PA_35_EN
[ Upstream commit f045e9df6537175d02565f21616ac1a9dd59b61c ]
When we enable PGTABLE_PA_35_EN, the PA for pgtable may be 35bits.
Thus add dma_mask for it.
Fixes: 301c3ca12576 ("iommu/mediatek: Allow page table PA up to 35bit")
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230316101445.12443-1-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason Gunthorpe <jgg@ziepe.ca>
Date: Mon Mar 6 13:27:04 2023 -0400
iommufd/selftest: Catch overflow of uptr and length
[ Upstream commit fd8c1a4aee973e87d890a5861e106625a33b2c4e ]
syzkaller hits a WARN_ON when trying to have a uptr close to UINTPTR_MAX:
WARNING: CPU: 1 PID: 393 at drivers/iommu/iommufd/selftest.c:403 iommufd_test+0xb19/0x16f0
Modules linked in:
CPU: 1 PID: 393 Comm: repro Not tainted 6.2.0-c9c3395d5e3d #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:iommufd_test+0xb19/0x16f0
Code: 94 c4 31 ff 44 89 e6 e8 a5 54 17 ff 45 84 e4 0f 85 bb 0b 00 00 41 be fb ff ff ff e8 31 53 17 ff e9 a0 f7 ff ff e8 27 53 17 ff <0f> 0b 41 be 8
RSP: 0018:ffffc90000eabdc0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8214c487
RDX: 0000000000000000 RSI: ffff88800f5c8000 RDI: 0000000000000002
RBP: ffffc90000eabe48 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: 00000000cd2b0000
R13: 00000000cd2af000 R14: 0000000000000000 R15: ffffc90000eabe68
FS: 00007f94d76d5740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000043 CR3: 0000000006880006 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
? write_comp_data+0x2f/0x90
iommufd_fops_ioctl+0x1ef/0x310
__x64_sys_ioctl+0x10e/0x160
? __pfx_iommufd_fops_ioctl+0x10/0x10
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Check that the user memory range doesn't overflow.
Fixes: f4b20bb34c83 ("iommufd: Add kernel support for testing iommufd")
Link: https://lore.kernel.org/r/0-v1-95390ed1df8d+8f-iommufd_mock_overflow_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/Y/hOiilV1wJvu/Hv@xpf.sh.intel.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Sat Feb 25 21:39:46 2023 -0800
ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on it
[ Upstream commit 2a587b9ad052e7e92e508aea90c1e2ae433c1908 ]
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP_MMIO" to
"select REGMAP_MMIO", which will also set REGMAP.
Fixes: eb994594bc22 ("ipmi: bt-bmc: Use a regmap for register access")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20230226053953.4681-2-rdunlap@infradead.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Date: Wed Apr 12 15:49:07 2023 +0800
ipmi: fix SSIF not responding under certain cond.
commit 6d2555cde2918409b0331560e66f84a0ad4849c6 upstream.
The ipmi communication is not restored after a specific version of BMC is
upgraded on our server.
The ipmi driver does not respond after printing the following log:
ipmi_ssif: Invalid response getting flags: 1c 1
I found that after entering this branch, ssif_info->ssif_state always
holds SSIF_GETTING_FLAGS and never return to IDLE.
As a result, the driver cannot be loaded, because the driver status is
checked during the unload process and must be IDLE in shutdown_ssif():
while (ssif_info->ssif_state != SSIF_IDLE)
schedule_timeout(1);
The process trigger this problem is:
1. One msg timeout and next msg start send, and call
ssif_set_need_watch().
2. ssif_set_need_watch()->watch_timeout()->start_flag_fetch() change
ssif_state to SSIF_GETTING_FLAGS.
3. In msg_done_handler() ssif_state == SSIF_GETTING_FLAGS, if an error
message is received, the second branch does not modify the ssif_state.
4. All retry action need IS_SSIF_IDLE() == True. Include retry action in
watch_timeout(), msg_done_handler(). Sending msg does not work either.
SSIF_IDLE is also checked in start_next_msg().
5. The only thing that can be triggered in the SSIF driver is
watch_timeout(), after destory_user(), this timer will stop too.
So, if enter this branch, the ssif_state will remain SSIF_GETTING_FLAGS
and can't send msg, no timer started, can't unload.
We did a comparative test before and after adding this patch, and the
result is effective.
Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF)")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20230412074907.80046-1-zhangyuchen.lcr@bytedance.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Corey Minyard <minyard@acm.org>
Date: Tue Apr 4 12:09:14 2023 +0000
ipmi:ssif: Add send_retries increment
commit 6ce7995a43febe693d4894033c6e29314970646a upstream.
A recent change removed an increment of send_retries, re-add it.
Fixes: 95767ed78a18 ipmi:ssif: resend_msg() cannot fail
Reported-by: Pavel Machek <pavel@denx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ziyang Xuan <william.xuanziyang@huawei.com>
Date: Thu Apr 20 20:40:35 2023 +0800
ipv4: Fix potential uninit variable access bug in __ip_make_skb()
[ Upstream commit 99e5acae193e369b71217efe6f1dad42f3f18815 ]
Like commit ea30388baebc ("ipv6: Fix an uninit variable access bug in
__ip6_make_skb()"). icmphdr does not in skb linear region under the
scenario of SOCK_RAW socket. Access icmp_hdr(skb)->type directly will
trigger the uninit variable access bug.
Use a local variable icmp_type to carry the correct value in different
scenarios.
Fixes: 96793b482540 ("[IPV4]: Add ICMPMsgStats MIB (RFC 4293)")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Joe Damato <jdamato@fastly.com>
Date: Sun Apr 16 19:12:22 2023 +0000
ixgbe: Allow flow hash to be set via ethtool
[ Upstream commit 4f3ed1293feb9502dc254b05802faf1ad3317ac6 ]
ixgbe currently returns `EINVAL` whenever the flowhash it set by ethtool
because the ethtool code in the kernel passes a non-zero value for hfunc
that ixgbe should allow.
When ethtool is called with `ETHTOOL_SRXFHINDIR`,
`ethtool_set_rxfh_indir` will call ixgbe's set_rxfh function
with `ETH_RSS_HASH_NO_CHANGE`. This value should be accepted.
When ethtool is called with `ETHTOOL_SRSSH`, `ethtool_set_rxfh` will
call ixgbe's set_rxfh function with `rxfh.hfunc`, which appears to be
hardcoded in ixgbe to always be `ETH_RSS_HASH_TOP`. This value should
also be accepted.
Before this patch:
$ sudo ethtool -L eth1 combined 10
$ sudo ethtool -X eth1 default
Cannot set RX flow hash configuration: Invalid argument
After this patch:
$ sudo ethtool -L eth1 combined 10
$ sudo ethtool -X eth1 default
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 10 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 0 1 2 3 4 5
16: 6 7 8 9 0 1 2 3
24: 4 5 6 7 8 9 0 1
...
Fixes: 1c7cf0784e4d ("ixgbe: support for ethtool set_rxfh")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Joe Damato <jdamato@fastly.com>
Date: Sun Apr 16 19:12:23 2023 +0000
ixgbe: Enable setting RSS table to default values
[ Upstream commit e85d3d55875f7a1079edfbc4e4e98d6f8aea9ac7 ]
ethtool uses `ETHTOOL_GRXRINGS` to compute how many queues are supported
by RSS. The driver should return the smaller of either:
- The maximum number of RSS queues the device supports, OR
- The number of RX queues configured
Prior to this change, running `ethtool -X $iface default` fails if the
number of queues configured is larger than the number supported by RSS,
even though changing the queue count correctly resets the flowhash to
use all supported queues.
Other drivers (for example, i40e) will succeed but the flow hash will
reset to support the maximum number of queues supported by RSS, even if
that amount is smaller than the configured amount.
Prior to this change:
$ sudo ethtool -L eth1 combined 20
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 20 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 10 11 12 13 14 15
16: 0 1 2 3 4 5 6 7
24: 8 9 10 11 12 13 14 15
32: 0 1 2 3 4 5 6 7
...
You can see that the flowhash was correctly set to use the maximum
number of queues supported by the driver (16).
However, asking the NIC to reset to "default" fails:
$ sudo ethtool -X eth1 default
Cannot set RX flow hash configuration: Invalid argument
After this change, the flowhash can be reset to default which will use
all of the available RSS queues (16) or the configured queue count,
whichever is smaller.
Starting with eth1 which has 10 queues and a flowhash distributing to
all 10 queues:
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 10 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 0 1 2 3 4 5
16: 6 7 8 9 0 1 2 3
...
Increasing the queue count to 48 resets the flowhash to distribute to 16
queues, as it did before this patch:
$ sudo ethtool -L eth1 combined 48
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 10 11 12 13 14 15
16: 0 1 2 3 4 5 6 7
...
Due to the other bugfix in this series, the flowhash can be set to use
queues 0-5:
$ sudo ethtool -X eth1 equal 5
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
0: 0 1 2 3 4 0 1 2
8: 3 4 0 1 2 3 4 0
16: 1 2 3 4 0 1 2 3
...
Due to this bugfix, the flowhash can be reset to default and use 16
queues:
$ sudo ethtool -X eth1 default
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 10 11 12 13 14 15
16: 0 1 2 3 4 5 6 7
...
Fixes: 91cd94bfe4f0 ("ixgbe: add basic support for setting and getting nfc controls")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jan Kara <jack@suse.cz>
Date: Wed Mar 29 17:49:32 2023 +0200
jdb2: Don't refuse invalidation of already invalidated buffers
[ Upstream commit bd159398a2d2234de07d310132865706964aaaa7 ]
When invalidating buffers under the partial tail page,
jbd2_journal_invalidate_folio() returns -EBUSY if the buffer is part of
the committing transaction as we cannot safely modify buffer state.
However if the buffer is already invalidated (due to previous
invalidation attempts from ext4_wait_for_tail_page_commit()), there's
nothing to do and there's no point in returning -EBUSY. This fixes
occasional warnings from ext4_journalled_invalidate_folio() triggered by
generic/051 fstest when blocksize < pagesize.
Fixes: 53e872681fed ("ext4: fix deadlock in journal_unmap_buffer()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Rutland <mark.rutland@arm.com>
Date: Tue Apr 18 17:42:12 2023 +0100
kasan: hw_tags: avoid invalid virt_to_page()
commit 29083fd84da576bfb3563d044f98d38e6b338f00 upstream.
When booting with 'kasan.vmalloc=off', a kernel configured with support
for KASAN_HW_TAGS will explode at boot time due to bogus use of
virt_to_page() on a vmalloc adddress. With CONFIG_DEBUG_VIRTUAL selected
this will be reported explicitly, and with or without CONFIG_DEBUG_VIRTUAL
the kernel will dereference a bogus address:
| ------------[ cut here ]------------
| virt_to_phys used for non-linear address: (____ptrval____) (0xffff800008000000)
| WARNING: CPU: 0 PID: 0 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x78/0x80
| Modules linked in:
| CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.3.0-rc3-00073-g83865133300d-dirty #4
| Hardware name: linux,dummy-virt (DT)
| pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __virt_to_phys+0x78/0x80
| lr : __virt_to_phys+0x78/0x80
| sp : ffffcd076afd3c80
| x29: ffffcd076afd3c80 x28: 0068000000000f07 x27: ffff800008000000
| x26: fffffbfff0000000 x25: fffffbffff000000 x24: ff00000000000000
| x23: ffffcd076ad3c000 x22: fffffc0000000000 x21: ffff800008000000
| x20: ffff800008004000 x19: ffff800008000000 x18: ffff800008004000
| x17: 666678302820295f x16: ffffffffffffffff x15: 0000000000000004
| x14: ffffcd076b009e88 x13: 0000000000000fff x12: 0000000000000003
| x11: 00000000ffffefff x10: c0000000ffffefff x9 : 0000000000000000
| x8 : 0000000000000000 x7 : 205d303030303030 x6 : 302e30202020205b
| x5 : ffffcd076b41d63f x4 : ffffcd076afd3827 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : ffffcd076afd3a30 x0 : 000000000000004f
| Call trace:
| __virt_to_phys+0x78/0x80
| __kasan_unpoison_vmalloc+0xd4/0x478
| __vmalloc_node_range+0x77c/0x7b8
| __vmalloc_node+0x54/0x64
| init_IRQ+0x94/0xc8
| start_kernel+0x194/0x420
| __primary_switched+0xbc/0xc4
| ---[ end trace 0000000000000000 ]---
| Unable to handle kernel paging request at virtual address 03fffacbe27b8000
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004
| CM = 0, WnR = 0
| swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041bc5000
| [03fffacbe27b8000] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.3.0-rc3-00073-g83865133300d-dirty #4
| Hardware name: linux,dummy-virt (DT)
| pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __kasan_unpoison_vmalloc+0xe4/0x478
| lr : __kasan_unpoison_vmalloc+0xd4/0x478
| sp : ffffcd076afd3ca0
| x29: ffffcd076afd3ca0 x28: 0068000000000f07 x27: ffff800008000000
| x26: 0000000000000000 x25: 03fffacbe27b8000 x24: ff00000000000000
| x23: ffffcd076ad3c000 x22: fffffc0000000000 x21: ffff800008000000
| x20: ffff800008004000 x19: ffff800008000000 x18: ffff800008004000
| x17: 666678302820295f x16: ffffffffffffffff x15: 0000000000000004
| x14: ffffcd076b009e88 x13: 0000000000000fff x12: 0000000000000001
| x11: 0000800008000000 x10: ffff800008000000 x9 : ffffb2f8dee00000
| x8 : 000ffffb2f8dee00 x7 : 205d303030303030 x6 : 302e30202020205b
| x5 : ffffcd076b41d63f x4 : ffffcd076afd3827 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : ffffcd076afd3a30 x0 : ffffb2f8dee00000
| Call trace:
| __kasan_unpoison_vmalloc+0xe4/0x478
| __vmalloc_node_range+0x77c/0x7b8
| __vmalloc_node+0x54/0x64
| init_IRQ+0x94/0xc8
| start_kernel+0x194/0x420
| __primary_switched+0xbc/0xc4
| Code: d34cfc08 aa1f03fa 8b081b39 d503201f (f9400328)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: Attempted to kill the idle task!
This is because init_vmalloc_pages() erroneously calls virt_to_page() on
a vmalloc address, while virt_to_page() is only valid for addresses in
the linear/direct map. Since init_vmalloc_pages() expects virtual
addresses in the vmalloc range, it must use vmalloc_to_page() rather
than virt_to_page().
We call init_vmalloc_pages() from __kasan_unpoison_vmalloc(), where we
check !is_vmalloc_or_module_addr(), suggesting that we might encounter a
non-vmalloc address. Luckily, this never happens. By design, we only
call __kasan_unpoison_vmalloc() on pointers in the vmalloc area, and I
have verified that we don't violate that expectation. Given that,
is_vmalloc_or_module_addr() must always be true for any legitimate
argument to __kasan_unpoison_vmalloc().
Correct init_vmalloc_pages() to use vmalloc_to_page(), and remove the
redundant and misleading use of is_vmalloc_or_module_addr() in
__kasan_unpoison_vmalloc().
Link: https://lkml.kernel.org/r/20230418164212.1775741-1-mark.rutland@arm.com
Fixes: 6c2f761dad7851d8 ("kasan: fix zeroing vmalloc memory with HW_TAGS")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Marco Elver <elver@google.com>
Date: Thu Mar 9 11:17:52 2023 +0100
kcsan: Avoid READ_ONCE() in read_instrumented_memory()
commit 8dec88070d964bfeb4198f34cb5956d89dd1f557 upstream.
Haibo Li reported:
| Unable to handle kernel paging request at virtual address
| ffffff802a0d8d7171
| Mem abort info:o:
| ESR = 0x9600002121
| EC = 0x25: DABT (current EL), IL = 32 bitsts
| SET = 0, FnV = 0 0
| EA = 0, S1PTW = 0 0
| FSC = 0x21: alignment fault
| Data abort info:o:
| ISV = 0, ISS = 0x0000002121
| CM = 0, WnR = 0 0
| swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000002835200000
| [ffffff802a0d8d71] pgd=180000005fbf9003, p4d=180000005fbf9003,
| pud=180000005fbf9003, pmd=180000005fbe8003, pte=006800002a0d8707
| Internal error: Oops: 96000021 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 2 PID: 45 Comm: kworker/u8:2 Not tainted
| 5.15.78-android13-8-g63561175bbda-dirty #1
| ...
| pc : kcsan_setup_watchpoint+0x26c/0x6bc
| lr : kcsan_setup_watchpoint+0x88/0x6bc
| sp : ffffffc00ab4b7f0
| x29: ffffffc00ab4b800 x28: ffffff80294fe588 x27: 0000000000000001
| x26: 0000000000000019 x25: 0000000000000001 x24: ffffff80294fdb80
| x23: 0000000000000000 x22: ffffffc00a70fb68 x21: ffffff802a0d8d71
| x20: 0000000000000002 x19: 0000000000000000 x18: ffffffc00a9bd060
| x17: 0000000000000001 x16: 0000000000000000 x15: ffffffc00a59f000
| x14: 0000000000000001 x13: 0000000000000000 x12: ffffffc00a70faa0
| x11: 00000000aaaaaaab x10: 0000000000000054 x9 : ffffffc00839adf8
| x8 : ffffffc009b4cf00 x7 : 0000000000000000 x6 : 0000000000000007
| x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffc00a70fb70
| x2 : 0005ff802a0d8d71 x1 : 0000000000000000 x0 : 0000000000000000
| Call trace:
| kcsan_setup_watchpoint+0x26c/0x6bc
| __tsan_read2+0x1f0/0x234
| inflate_fast+0x498/0x750
| zlib_inflate+0x1304/0x2384
| __gunzip+0x3a0/0x45c
| gunzip+0x20/0x30
| unpack_to_rootfs+0x2a8/0x3fc
| do_populate_rootfs+0xe8/0x11c
| async_run_entry_fn+0x58/0x1bc
| process_one_work+0x3ec/0x738
| worker_thread+0x4c4/0x838
| kthread+0x20c/0x258
| ret_from_fork+0x10/0x20
| Code: b8bfc2a8 2a0803f7 14000007 d503249f (78bfc2a8) )
| ---[ end trace 613a943cb0a572b6 ]-----
The reason for this is that on certain arm64 configuration since
e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when
CONFIG_LTO=y"), READ_ONCE() may be promoted to a full atomic acquire
instruction which cannot be used on unaligned addresses.
Fix it by avoiding READ_ONCE() in read_instrumented_memory(), and simply
forcing the compiler to do the required access by casting to the
appropriate volatile type. In terms of generated code this currently
only affects architectures that do not use the default READ_ONCE()
implementation.
The only downside is that we are not guaranteed atomicity of the access
itself, although on most architectures a plain load up to machine word
size should still be atomic (a fact the default READ_ONCE() still relies
on itself).
Reported-by: Haibo Li <haibo.li@mediatek.com>
Tested-by: Haibo Li <haibo.li@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.17+
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kees Cook <keescook@chromium.org>
Date: Thu Mar 2 14:49:50 2023 -0800
kheaders: Use array declaration instead of char
commit b69edab47f1da8edd8e7bfdf8c70f51a2a5d89fb upstream.
Under CONFIG_FORTIFY_SOURCE, memcpy() will check the size of destination
and source buffers. Defining kernel_headers_data as "char" would trip
this check. Since these addresses are treated as byte arrays, define
them as arrays (as done everywhere else).
This was seen with:
$ cat /sys/kernel/kheaders.tar.xz >> /dev/null
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1027!
...
RIP: 0010:fortify_panic+0xf/0x20
[...]
Call Trace:
<TASK>
ikheaders_read+0x45/0x50 [kheaders]
kernfs_fop_read_iter+0x1a4/0x2f0
...
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20230302112130.6e402a98@kernel.org/
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 43d8ce9d65a5 ("Provide in-kernel headers to make extending kernel easier")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230302224946.never.243-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Wed May 3 08:51:51 2023 +0900
ksmbd: call rcu_barrier() in ksmbd_server_exit()
commit eb307d09fe15844fdaebeb8cc8c9b9e925430aa5 upstream.
racy issue is triggered the bug by racing between closing a connection
and rmmod. In ksmbd, rcu_barrier() is not called at module unload time,
so nothing prevents ksmbd from getting unloaded while it still has RCU
callbacks pending. It leads to trigger unintended execution of kernel
code locally and use to defeat protections such as Kernel Lockdown
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20477
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Wed May 3 08:44:14 2023 +0900
ksmbd: fix deadlock in ksmbd_find_crypto_ctx()
commit 7b4323373d844954bb76e0e9f39c4e5fc785fa7b upstream.
Deadlock is triggered by sending multiple concurrent session setup
requests. It should be reused after releasing when getting ctx for crypto.
Multiple consecutive ctx uses cause deadlock while waiting for releasing
due to the limited number of ctx.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20591
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Wed May 3 08:26:45 2023 +0900
ksmbd: fix memleak in session setup
commit 6d7cb549c2ca20e1f07593f15e936fd54b763028 upstream.
If client send session setup request with unknown NTLMSSP message type,
session that does not included channel can be created. It will cause
session memleak. because ksmbd_sessions_deregister() does not destroy
session if channel is not included. This patch return error response if
client send the request unknown NTLMSSP message type.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20593
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Wed May 3 08:38:33 2023 +0900
ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem()
commit 3ac00a2ab69b34189942afa9e862d5170cdcb018 upstream.
If share is , share->path is NULL and it cause NULL pointer
dereference issue.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20479
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Wed May 3 08:51:12 2023 +0900
ksmbd: fix racy issue under cocurrent smb2 tree disconnect
commit 30210947a343b6b3ca13adc9bfc88e1543e16dd5 upstream.
There is UAF issue under cocurrent smb2 tree disconnect.
This patch introduce TREE_CONN_EXPIRE flags for tcon to avoid cocurrent
access.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20592
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Wed May 3 08:45:08 2023 +0900
ksmbd: not allow guest user on multichannel
commit 3353ab2df5f68dab7da8d5ebb427a2d265a1f2b2 upstream.
This patch return STATUS_NOT_SUPPORTED if binding session is guest.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20480
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rae Moar <rmoar@google.com>
Date: Wed Mar 8 20:39:51 2023 +0000
kunit: fix bug in the order of lines in debugfs logs
[ Upstream commit f9a301c3317daa921375da0aec82462ddf019928 ]
Fix bug in debugfs logs that causes an incorrect order of lines in the
debugfs log.
Currently, the test counts lines that show the number of tests passed,
failed, and skipped, as well as any suite diagnostic lines,
appear prior to the individual results, which is a bug.
Ensure the order of printing for the debugfs log is correct. Additionally,
add a KTAP header to so the debugfs logs can be valid KTAP.
This is an example of a log prior to these fixes:
KTAP version 1
# Subtest: kunit_status
1..2
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 1 kunit_status_set_failure_test
ok 2 kunit_status_mark_skipped_test
ok 1 kunit_status
Note the two lines with stats are out of order. This is the same debugfs
log after the fixes (in combination with the third patch to remove the
extra line):
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit_status
1..2
ok 1 kunit_status_set_failure_test
ok 2 kunit_status_mark_skipped_test
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 1 kunit_status
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Oliver Upton <oliver.upton@linux.dev>
Date: Mon Mar 27 16:47:45 2023 +0000
KVM: arm64: Avoid lock inversion when setting the VM register width
commit c43120afb5c66a3465c7468f5cf9806a26484cde upstream.
kvm->lock must be taken outside of the vcpu->mutex. Of course, the
locking documentation for KVM makes this abundantly clear. Nonetheless,
the locking order in KVM/arm64 has been wrong for quite a while; we
acquire the kvm->lock while holding the vcpu->mutex all over the shop.
All was seemingly fine until commit 42a90008f890 ("KVM: Ensure lockdep
knows about kvm->lock vs. vcpu->mutex ordering rule") caught us with our
pants down, leading to lockdep barfing:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc7+ #19 Not tainted
------------------------------------------------------
qemu-system-aar/859 is trying to acquire lock:
ffff5aa69269eba0 (&host_kvm->lock){+.+.}-{3:3}, at: kvm_reset_vcpu+0x34/0x274
but task is already holding lock:
ffff5aa68768c0b8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x8c/0xba0
which lock already depends on the new lock.
Add a dedicated lock to serialize writes to VM-scoped configuration from
the context of a vCPU. Protect the register width flags with the new
lock, thus avoiding the need to grab the kvm->lock while holding
vcpu->mutex in kvm_reset_vcpu().
Cc: stable@vger.kernel.org
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Link: https://lore.kernel.org/kvmarm/f6452cdd-65ff-34b8-bab0-5c06416da5f6@arm.com/
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-3-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oliver Upton <oliver.upton@linux.dev>
Date: Mon Mar 27 16:47:44 2023 +0000
KVM: arm64: Avoid vcpu->mutex v. kvm->lock inversion in CPU_ON
commit 0acc7239c20a8401b8968c2adace8f7c9b0295ae upstream.
KVM/arm64 had the lock ordering backwards on vcpu->mutex and kvm->lock
from the very beginning. One such example is the way vCPU resets are
handled: the kvm->lock is acquired while handling a guest CPU_ON PSCI
call.
Add a dedicated lock to serialize writes to kvm_vcpu_arch::{mp_state,
reset_state}. Promote all accessors of mp_state to {READ,WRITE}_ONCE()
as readers do not acquire the mp_state_lock. While at it, plug yet
another race by taking the mp_state_lock in the KVM_SET_MP_STATE ioctl
handler.
As changes to MP state are now guarded with a dedicated lock, drop the
kvm->lock acquisition from the PSCI CPU_ON path. Similarly, move the
reader of reset_state outside of the kvm->lock and instead protect it
with the mp_state_lock. Note that writes to reset_state::reset have been
demoted to regular stores as both readers and writers acquire the
mp_state_lock.
While the kvm->lock inversion still exists in kvm_reset_vcpu(), at least
now PSCI CPU_ON no longer depends on it for serializing vCPU reset.
Cc: stable@vger.kernel.org
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-2-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oliver Upton <oliver.upton@linux.dev>
Date: Mon Mar 27 16:47:46 2023 +0000
KVM: arm64: Use config_lock to protect data ordered against KVM_RUN
commit 4bba7f7def6f278266dadf845da472cfbfed784e upstream.
There are various bits of VM-scoped data that can only be configured
before the first call to KVM_RUN, such as the hypercall bitmaps and
the PMU. As these fields are protected by the kvm->lock and accessed
while holding vcpu->mutex, this is yet another example of lock
inversion.
Change out the kvm->lock for kvm->arch.config_lock in all of these
instances. Opportunistically simplify the locking mechanics of the
PMU configuration by holding the config_lock for the entirety of
kvm_arm_pmu_v3_set_attr().
Note that this also addresses a couple of bugs. There is an unguarded
read of the PMU version in KVM_ARM_VCPU_PMU_V3_FILTER which could race
with KVM_ARM_VCPU_PMU_V3_SET_PMU. Additionally, until now writes to the
per-vCPU vPMU irq were not serialized VM-wide, meaning concurrent calls
to KVM_ARM_VCPU_PMU_V3_IRQ could lead to a false positive in
pmu_irq_is_valid().
Cc: stable@vger.kernel.org
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-4-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oliver Upton <oliver.upton@linux.dev>
Date: Mon Mar 27 16:47:47 2023 +0000
KVM: arm64: Use config_lock to protect vgic state
commit f00327731131d1b5aa6a1aa9f50bcf8d620ace4c upstream.
Almost all of the vgic state is VM-scoped but accessed from the context
of a vCPU. These accesses were serialized on the kvm->lock which cannot
be nested within a vcpu->mutex critical section.
Move over the vgic state to using the config_lock. Tweak the lock
ordering where necessary to ensure that the config_lock is acquired
after the vcpu->mutex. Acquire the config_lock in kvm_vgic_create() to
avoid a race between the converted flows and GIC creation. Where
necessary, continue to acquire kvm->lock to avoid a race with vCPU
creation (i.e. flows that use lock_all_vcpus()).
Finally, promote the locking expectations in comments to lockdep
assertions and update the locking documentation for the config_lock as
well as vcpu->mutex.
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-5-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oliver Upton <oliver.upton@linux.dev>
Date: Wed Apr 12 06:27:33 2023 +0000
KVM: arm64: vgic: Don't acquire its_lock before config_lock
commit 49e5d16b6fc003407a33a9961b4bcbb970bd1c76 upstream.
commit f00327731131 ("KVM: arm64: Use config_lock to protect vgic
state") was meant to rectify a longstanding lock ordering issue in KVM
where the kvm->lock is taken while holding vcpu->mutex. As it so
happens, the aforementioned commit introduced yet another locking issue
by acquiring the its_lock before acquiring the config lock.
This is obviously wrong, especially considering that the lock ordering
is well documented in vgic.c. Reshuffle the locks once more to take the
config_lock before the its_lock. While at it, sprinkle in the lockdep
hinting that has become popular as of late to keep lockdep apprised of
our ordering.
Cc: stable@vger.kernel.org
Fixes: f00327731131 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230412062733.988229-1-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Tue Apr 4 17:23:59 2023 -0700
KVM: nVMX: Emulate NOPs in L2, and PAUSE if it's not intercepted
commit 4984563823f0034d3533854c1b50e729f5191089 upstream.
Extend VMX's nested intercept logic for emulated instructions to handle
"pause" interception, in quotes because KVM's emulator doesn't filter out
NOPs when checking for nested intercepts. Failure to allow emulation of
NOPs results in KVM injecting a #UD into L2 on any NOP that collides with
the emulator's definition of PAUSE, i.e. on all single-byte NOPs.
For PAUSE itself, honor L1's PAUSE-exiting control, but ignore PLE to
avoid unnecessarily injecting a #UD into L2. Per the SDM, the first
execution of PAUSE after VM-Entry is treated as the beginning of a new
loop, i.e. will never trigger a PLE VM-Exit, and so L1 can't expect any
given execution of PAUSE to deterministically exit.
... the processor considers this execution to be the first execution of
PAUSE in a loop. (It also does so for the first execution of PAUSE at
CPL 0 after VM entry.)
All that said, the PLE side of things is currently a moot point, as KVM
doesn't expose PLE to L1.
Note, vmx_check_intercept() is still wildly broken when L1 wants to
intercept an instruction, as KVM injects a #UD instead of synthesizing a
nested VM-Exit. That issue extends far beyond NOP/PAUSE and needs far
more effort to fix, i.e. is a problem for the future.
Fixes: 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode")
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: stable@vger.kernel.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20230405002359.418138-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Matlack <dmatlack@google.com>
Date: Fri Mar 17 14:11:06 2023 -0700
KVM: RISC-V: Retry fault if vma_lookup() results become invalid
commit 2ed90cb0938a45b12eb947af062d12c7af0067b3 upstream.
Read mmu_invalidate_seq before dropping the mmap_lock so that KVM can
detect if the results of vma_lookup() (e.g. vma_shift) become stale
before it acquires kvm->mmu_lock. This fixes a theoretical bug where a
VMA could be changed by userspace after vma_lookup() and before KVM
reads the mmu_invalidate_seq, causing KVM to install page table entries
based on a (possibly) no-longer-valid vma_shift.
Re-order the MMU cache top-up to earlier in user_mem_abort() so that it
is not done after KVM has read mmu_invalidate_seq (i.e. so as to avoid
inducing spurious fault retries).
It's unlikely that any sane userspace currently modifies VMAs in such a
way as to trigger this race. And even with directed testing I was unable
to reproduce it. But a sufficiently motivated host userspace might be
able to exploit this race.
Note KVM/ARM had the same bug and was fixed in a separate, near
identical patch (see Link).
Link: https://lore.kernel.org/kvm/20230313235454.2964067-1-dmatlack@google.com/
Fixes: 9955371cc014 ("RISC-V: KVM: Implement MMU notifiers")
Cc: stable@vger.kernel.org
Signed-off-by: David Matlack <dmatlack@google.com>
Tested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Sat Jan 28 00:14:27 2023 +0000
KVM: x86/pmu: Disallow legacy LBRs if architectural LBRs are available
commit 098f4c061ea10b777033b71c10bd9fd706820ee9 upstream.
Disallow enabling LBR support if the CPU supports architectural LBRs.
Traditional LBR support is absent on CPU models that have architectural
LBRs, and KVM doesn't yet support arch LBRs, i.e. KVM will pass through
non-existent MSRs if userspace enables LBRs for the guest.
Cc: stable@vger.kernel.org
Cc: Yang Weijiang <weijiang.yang@intel.com>
Cc: Like Xu <like.xu.linux@gmail.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: be635e34c284 ("KVM: vmx/pmu: Expose LBR_FMT in the MSR_IA32_PERF_CAPABILITIES")
Tested-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230128001427.2548858-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: H. Nikolaus Schaller <hns@goldelico.com>
Date: Sun Apr 2 13:12:59 2023 +0200
leds: tca6507: Fix error handling of using fwnode_property_read_string
[ Upstream commit c1087c29e96a48e9080377e168d35dcb52fb068b ]
Commit 96f524105b9c ("leds: tca6507: use fwnode API instead of OF")
changed to fwnode API but did not take into account that a missing property
"linux,default-trigger" now seems to return an error and as a side effect
sets value to -1. This seems to be different from of_get_property() which
always returned NULL in any case of error.
Neglecting this side-effect leads to
[ 11.201965] Unable to handle kernel paging request at virtual address ffffffff when read
in the strcmp() of led_trigger_set_default() if there is no led-trigger
defined in the DTS.
I don't know if this was recently introduced somewhere in the fwnode lib
or if the effect was missed in initial testing. Anyways it seems to be a
bug to ignore the error return value of an optional value here in the
driver.
Fixes: 96f524105b9c ("leds: tca6507: use fwnode API instead of OF")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/cbae7617db83113de726fcc423a805ebaa1bfca6.1680433978.git.hns@goldelico.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Sat Feb 25 21:39:49 2023 -0800
leds: TI_LMU_COMMON: select REGMAP instead of depending on it
[ Upstream commit a61079efc87888587e463afaed82417b162fbd69 ]
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: 3fce8e1eb994 ("leds: TI LMU: Add common code for TI LMU devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230226053953.4681-5-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexei Starovoitov <ast@kernel.org>
Date: Sun Mar 19 13:30:13 2023 -0700
libbpf: Fix ld_imm64 copy logic for ksym in light skeleton.
[ Upstream commit a506d6ce1dd184051037dc9d26c3eb187c9fe625 ]
Unlike normal libbpf the light skeleton 'loader' program is doing
btf_find_by_name_kind() call at run-time to find ksym in the kernel and
populate its {btf_id, btf_obj_fd} pair in ld_imm64 insn. To avoid doing the
search multiple times for the same ksym it remembers the first patched ld_imm64
insn and copies {btf_id, btf_obj_fd} from it into subsequent ld_imm64 insn.
Fix a bug in copying logic, since it may incorrectly clear BPF_PSEUDO_BTF_ID flag.
Also replace always true if (btf_obj_fd >= 0) check with unconditional JMP_JA
to clarify the code.
Fixes: d995816b77eb ("libbpf: Avoid reload of imm for weak, unresolved, repeating ksym")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230319203014.55866-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Thu May 11 23:11:36 2023 +0900
Linux 6.2.15
Link: https://lore.kernel.org/r/20230508094428.384831245@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230509030701.507375024@linuxfoundation.org
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Tue Mar 28 19:15:29 2023 -0700
linux/vt_buffer.h: allow either builtin or modular for macros
[ Upstream commit 2b76ffe81e32afd6d318dc4547e2ba8c46207b77 ]
Fix build errors on ARCH=alpha when CONFIG_MDA_CONSOLE=m.
This allows the ARCH macros to be the only ones defined.
In file included from ../drivers/video/console/mdacon.c:37:
../arch/alpha/include/asm/vga.h:17:40: error: expected identifier or '(' before 'volatile'
17 | static inline void scr_writew(u16 val, volatile u16 *addr)
| ^~~~~~~~
../include/linux/vt_buffer.h:24:34: note: in definition of macro 'scr_writew'
24 | #define scr_writew(val, addr) (*(addr) = (val))
| ^~~~
../include/linux/vt_buffer.h:24:40: error: expected ')' before '=' token
24 | #define scr_writew(val, addr) (*(addr) = (val))
| ^
../arch/alpha/include/asm/vga.h:17:20: note: in expansion of macro 'scr_writew'
17 | static inline void scr_writew(u16 val, volatile u16 *addr)
| ^~~~~~~~~~
../arch/alpha/include/asm/vga.h:25:29: error: expected identifier or '(' before 'volatile'
25 | static inline u16 scr_readw(volatile const u16 *addr)
| ^~~~~~~~
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Link: https://lore.kernel.org/r/20230329021529.16188-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Thu Mar 30 11:35:58 2023 +0800
macintosh/windfarm_smu_sat: Add missing of_node_put()
[ Upstream commit 631cf002826007ab7415258ee647dcaf8845ad5a ]
We call of_node_get() in wf_sat_probe() after sat is created,
so we need the of_node_put() before *kfree(sat)*.
Fixes: ac171c46667c ("[PATCH] powerpc: Thermal control for dual core G5s")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230330033558.2562778-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Wed Feb 22 17:42:41 2023 -0800
macintosh: via-pmu-led: requires ATA to be set
[ Upstream commit 05dce4ba125336875cd3eed3c1503fa81cd2f691 ]
LEDS_TRIGGER_DISK depends on ATA, so selecting LEDS_TRIGGER_DISK
when ATA is not set/enabled causes a Kconfig warning:
WARNING: unmet direct dependencies detected for LEDS_TRIGGER_DISK
Depends on [n]: NEW_LEDS [=y] && LEDS_TRIGGERS [=y] && ATA [=n]
Selected by [y]:
- ADB_PMU_LED_DISK [=y] && MACINTOSH_DRIVERS [=y] && ADB_PMU_LED [=y] && LEDS_CLASS [=y]
Fix this by making ADB_PMU_LED_DISK depend on ATA.
Seen on both PPC32 and PPC64.
Fixes: 0e865a80c135 ("macintosh: Remove dependency on IDE_GD_ATA if ADB_PMU_LED_DISK is selected")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223014241.20878-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Conor Dooley <conor.dooley@microchip.com>
Date: Tue Mar 7 20:22:52 2023 +0000
mailbox: mpfs: switch to txdone_poll
[ Upstream commit b5984a9844fc45cd301a28fb56f3de95f7e20f3c ]
The system controller on PolarFire SoC has no interrupt to signify that
the TX has been completed. The interrupt instead signals that a service
requested by the mailbox client has succeeded. If a service fails, there
will be no interrupt delivered.
Switch to polling the busy register to determine whether transmission
has completed.
Fixes: 83d7b1560810 ("mbox: add polarfire soc system controller mailbox")
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Tested-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tanmay Shah <tanmay.shah@amd.com>
Date: Fri Mar 10 17:24:05 2023 -0800
mailbox: zynqmp: Fix IPI isr handling
commit 74ad37a30ffee3643bc34f9ca7225b20a66abaaf upstream.
Multiple IPI channels are mapped to same interrupt handler.
Current isr implementation handles only one channel per isr.
Fix this behavior by checking isr status bit of all child
mailbox nodes.
Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230311012407.1292118-3-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tanmay Shah <tanmay.shah@amd.com>
Date: Fri Mar 10 17:24:06 2023 -0800
mailbox: zynqmp: Fix typo in IPI documentation
commit 79963fbfc233759bd8a43462f120d15a1bd4f4fa upstream.
Xilinx IPI message buffers allows 32-byte data transfer.
Fix documentation that says 12 bytes
Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230311012407.1292118-4-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Tue Mar 14 09:22:58 2023 +0800
md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
[ Upstream commit 7cddb055bfda5f7b0be931e8ea750fc28bc18a27 ]
handle_read_error() will resumit r10_bio by raid10_read_request(), which
will call bio_start_io_acct() again, while bio_end_io_acct() will only
be called once.
Fix the problem by don't account io again from handle_read_error().
Fixes: 528bc2cf2fcc ("md/raid10: enable io accounting")
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230314012258.2395894-1-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Fri Mar 10 15:38:53 2023 +0800
md/raid10: fix leak of 'r10bio->remaining' for recovery
[ Upstream commit 26208a7cffd0c7cbf14237ccd20c7270b3ffeb7e ]
raid10_sync_request() will add 'r10bio->remaining' for both rdev and
replacement rdev. However, if the read io fails, recovery_request_write()
returns without issuing the write io, in this case, end_sync_request()
is only called once and 'remaining' is leaked, cause an io hang.
Fix the problem by decreasing 'remaining' according to if 'bio' and
'repl_bio' is valid.
Fixes: 24afd80d99f8 ("md/raid10: handle recovery of replacement devices.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-5-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Fri Mar 10 15:38:54 2023 +0800
md/raid10: fix memleak for 'conf->bio_split'
[ Upstream commit c9ac2acde53f5385de185bccf6aaa91cf9ac1541 ]
In the error path of raid10_run(), 'conf' need be freed, however,
'conf->bio_split' is missed and memory will be leaked.
Since there are 3 places to free 'conf', factor out a helper to fix the
problem.
Fixes: fc9977dd069e ("md/raid10: simplify the splitting of requests.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-6-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Fri Mar 10 15:38:55 2023 +0800
md/raid10: fix memleak of md thread
[ Upstream commit f0ddb83da3cbbf8a1f9087a642c448ff52ee9abd ]
In raid10_run(), if setup_conf() succeed and raid10_run() failed before
setting 'mddev->thread', then in the error path 'conf->thread' is not
freed.
Fix the problem by setting 'mddev->thread' right after setup_conf().
Fixes: 43a521238aca ("md-cluster: choose correct label when clustered layout is not supported")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-7-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Li Nan <linan122@huawei.com>
Date: Wed Feb 22 12:10:00 2023 +0800
md/raid10: fix null-ptr-deref in raid10_sync_request
commit a405c6f0229526160aa3f177f65e20c86fce84c5 upstream.
init_resync() inits mempool and sets conf->have_replacemnt at the beginning
of sync, close_sync() frees the mempool when sync is completed.
After [1] recovery might be skipped and init_resync() is called but
close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio.
The following is one way to reproduce the issue.
1) create a array, wait for resync to complete, mddev->recovery_cp is set
to MaxSector.
2) recovery is woken and it is skipped. conf->have_replacement is set to
0 in init_resync(). close_sync() not called.
3) some io errors and rdev A is set to WantReplacement.
4) a new device is added and set to A's replacement.
5) recovery is woken, A have replacement, but conf->have_replacemnt is
0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref
occurs.
Fix it by not calling init_resync() if recovery skipped.
[1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled")
Fixes: 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled")
Cc: stable@vger.kernel.org
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230222041000.3341651-3-linan666@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Li Nan <linan122@huawei.com>
Date: Wed Feb 22 12:09:59 2023 +0800
md/raid10: fix task hung in raid10d
[ Upstream commit 72c215ed8731c88b2d7e09afc51fffc207ae47b8 ]
commit fe630de009d0 ("md/raid10: avoid deadlock on recovery.") allowed
normal io and sync io to exist at the same time. Task hung will occur as
below:
T1 T2 T3 T4
raid10d
handle_read_error
allow_barrier
conf->nr_pending--
-> 0
//submit sync io
raid10_sync_request
raise_barrier
->will not be blocked
...
//submit to drivers
raid10_read_request
wait_barrier
conf->nr_pending++
-> 1
//retry read fail
raid10_end_read_request
reschedule_retry
add to retry_list
conf->nr_queued++
-> 1
//sync io fail
end_sync_read
__end_sync_read
reschedule_retry
add to retry_list
conf->nr_queued++
-> 2
...
handle_read_error
get form retry_list
conf->nr_queued--
freeze_array
wait nr_pending == nr_queued+1
->1 ->2
//task hung
retry read and sync io will be added to retry_list(nr_queued->2) if they
fails. raid10d() called handle_read_error() and hung in freeze_array().
nr_queued will not decrease because raid10d is blocked, nr_pending will
not increase because conf->barrier is not released.
Fix it by moving allow_barrier() after raid10_read_request().
raise_barrier() will wait for nr_waiting to become 0. Therefore, sync io
and regular io will not be issued at the same time.
Also remove the check of nr_queued in stop_waiting_barrier. It can be 0
but don't need to be blocking. Remove the check for MD_RECOVERY_RUNNING as
the check is redundent.
Fixes: fe630de009d0 ("md/raid10: avoid deadlock on recovery.")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230222041000.3341651-2-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jan Kara <jack@suse.cz>
Date: Mon Apr 17 19:15:37 2023 +0200
md/raid5: Improve performance for sequential IO
commit fc05e06e6098ca2c28f7a10da0e00aeea20fa59e upstream.
Commit 7e55c60acfbb ("md/raid5: Pivot raid5_make_request()") changed the
order in which requests for underlying disks are created. Since for
large sequential IO adding of requests frequently races with md_raid5
thread submitting bios to underlying disks, this results in a change in
IO pattern because intermediate states of new order of request creation
result in more smaller discontiguous requests. For RAID5 on top of three
rotational disks our performance testing revealed this results in
regression in write throughput:
iozone -a -s 131072000 -y 4 -q 8 -i 0 -i 1 -R
before 7e55c60acfbb:
KB reclen write rewrite read reread
131072000 4 493670 525964 524575 513384
131072000 8 540467 532880 512028 513703
after 7e55c60acfbb:
KB reclen write rewrite read reread
131072000 4 421785 456184 531278 509248
131072000 8 459283 456354 528449 543834
To reduce the amount of discontiguous requests we can start generating
requests with the stripe with the lowest chunk offset as that has the
best chance of being adjacent to IO queued previously. This improves the
performance to:
KB reclen write rewrite read reread
131072000 4 497682 506317 518043 514559
131072000 8 514048 501886 506453 504319
restoring big part of the regression.
Fixes: 7e55c60acfbb ("md/raid5: Pivot raid5_make_request()")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230417171537.17899-1-jack@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ming Qian <ming.qian@nxp.com>
Date: Thu Mar 2 06:34:10 2023 +0100
media: amphion: decoder implement display delay enable
[ Upstream commit ffa331d9bf9407655fc4c4d57dcc92ed2868e326 ]
amphion vpu support a low latency mode,
when V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE is enabled,
decoder can display frame immediately after it's decoded.
Only h264 is support yet.
Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Tue Mar 7 11:00:23 2023 +0100
media: av7110: prevent underflow in write_ts_to_decoder()
[ Upstream commit eed9496a0501357aa326ddd6b71408189ed872eb ]
The buf[4] value comes from the user via ts_play(). It is a value in
the u8 range. The final length we pass to av7110_ipack_instant_repack()
is "len - (buf[4] + 1) - 4" so add a check to ensure that the length is
not negative. It's not clear that passing a negative len value does
anything bad necessarily, but it's not best practice.
With the new bounds checking the "if (!len)" condition is no longer
possible or required so remove that.
Fixes: fd46d16d602a ("V4L/DVB (11759): dvb-ttpci: Add TS replay capability")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Date: Wed Feb 8 08:14:42 2023 +0100
media: bdisp: Add missing check for create_workqueue
[ Upstream commit 2371adeab717d8fe32144a84f3491a03c5838cfb ]
Add the check for the return value of the create_workqueue
in order to avoid NULL pointer dereference.
Fixes: 28ffeebbb7bd ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zheng Wang <zyytlz.wz@163.com>
Date: Mon Mar 13 16:31:20 2023 +0000
media: cedrus: fix use after free bug in cedrus_remove due to race condition
[ Upstream commit 50d0a7aea4809cef87979d4669911276aa23b71f ]
In cedrus_probe, dev->watchdog_work is bound with cedrus_watchdog function.
In cedrus_device_run, it will started by schedule_delayed_work. If there is
an unfinished work in cedrus_remove, there may be a race condition and
trigger UAF bug.
CPU0 CPU1
|cedrus_watchdog
cedrus_remove |
v4l2_m2m_release |
kfree(m2m_dev) |
|
| v4l2_m2m_get_curr_priv
| m2m_dev //use
Fix it by canceling the worker in cedrus_remove.
Fixes: 7c38a551bda1 ("media: cedrus: Add watchdog for job completion")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zheng Wang <zyytlz.wz@163.com>
Date: Sat Mar 18 16:15:06 2023 +0800
media: dm1105: Fix use after free bug in dm1105_remove due to race condition
[ Upstream commit 5abda7a16698d4d1f47af1168d8fa2c640116b4a ]
In dm1105_probe, it called dm1105_ir_init and bound
&dm1105->ir.work with dm1105_emit_key.
When it handles IRQ request with dm1105_irq,
it may call schedule_work to start the work.
When we call dm1105_remove to remove the driver, there
may be a sequence as follows:
Fix it by finishing the work before cleanup in dm1105_remove
CPU0 CPU1
|dm1105_emit_key
dm1105_remove |
dm1105_ir_exit |
rc_unregister_device |
rc_free_device |
rc_dev_release |
kfree(dev); |
|
| rc_keydown
| //use
Fixes: 34d2f9bf189c ("V4L/DVB: dm1105: use dm1105_dev & dev instead of dm1105dvb")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wei Chen <harperchen1110@gmail.com>
Date: Mon Mar 27 11:58:09 2023 +0000
media: hi846: Fix memleak in hi846_init_controls()
[ Upstream commit 2649c1a20e8e399ee955d0e22192f9992662c3d2 ]
hi846_init_controls doesn't clean the allocated ctrl_hdlr
in case there is a failure, which causes memleak. Add
v4l2_ctrl_handler_free to free the resource properly.
Fixes: e8c0882685f9 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Reviewed-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sat Jan 14 22:46:50 2023 +0100
media: max9286: Free control handler
[ Upstream commit bfce6a12e5ba1edde95126aa06778027f16115d4 ]
The control handler is leaked in some probe-time error paths, as well as
in the remove path. Fix it.
Fixes: 66d8c9d2422d ("media: i2c: Add MAX9286 driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Wed Feb 1 07:33:13 2023 +0000
media: mediatek: vcodec: add core decode done event
[ Upstream commit d227af847ac2d7d90350124a1b2451e4fc1f050c ]
Need to make sure core decode done before current instance is free.
Fixes: 365e4ba01df4 ("media: mtk-vcodec: Add work queue for core hardware decode")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Wed Feb 1 07:33:10 2023 +0000
media: mediatek: vcodec: add params to record lat and core lat_buf count
[ Upstream commit 5bbb6e2ca67477ab41163b32e6b3444faea74a5e ]
Using lat_buf to share decoder information between lat and core work
queue, adding params to record the buf count.
Fixes: 365e4ba01df4 ("media: mtk-vcodec: Add work queue for core hardware decode")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Tue Mar 28 10:14:50 2023 +0100
media: mediatek: vcodec: add remove function for decoder platform driver
[ Upstream commit e2a10b3801061d05d3e3415b9b824251451cfd6c ]
Need to disable decoder power when remove decoder hardware driver, adding
remove callback function in the definition of platform driver.
Fixes: c05bada35f01 ("media: mtk-vcodec: Add to support multi hardware decode")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Wed Feb 1 07:33:16 2023 +0000
media: mediatek: vcodec: change lat thread decode error condition
[ Upstream commit 960badda95f10fb0c60f6f64978b19eafa9507a7 ]
If lat thread can't get lat buffer, it should be that current instance
don't be schedulded, the driver can't free the src buffer directly.
Fixes: 7b182b8d9c85 ("media: mediatek: vcodec: Refactor get and put capture buffer flow")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Tue Mar 28 10:14:49 2023 +0100
media: mediatek: vcodec: fix decoder disable pm crash
[ Upstream commit 9d2f13fb47dcab6d094f34ecfd6a879a409722b3 ]
Can't call pm_runtime_disable when the architecture support sub device for
'dev->pm.dev' is NUll, or will get below crash log.
[ 10.771551] pc : _raw_spin_lock_irq+0x4c/0xa0
[ 10.771556] lr : __pm_runtime_disable+0x30/0x130
[ 10.771558] sp : ffffffc01e4cb800
[ 10.771559] x29: ffffffc01e4cb800 x28: ffffffdf082108a8
[ 10.771563] x27: ffffffc01e4cbd70 x26: ffffff8605df55f0
[ 10.771567] x25: 0000000000000002 x24: 0000000000000002
[ 10.771570] x23: ffffff85c0dc9c00 x22: 0000000000000001
[ 10.771573] x21: 0000000000000001 x20: 0000000000000000
[ 10.771577] x19: 00000000000000f4 x18: ffffffdf2e9fbe18
[ 10.771580] x17: 0000000000000000 x16: ffffffdf2df13c74
[ 10.771583] x15: 00000000000002ea x14: 0000000000000058
[ 10.771587] x13: ffffffdf2de1b62c x12: ffffffdf2e9e30e4
[ 10.771590] x11: 0000000000000000 x10: 0000000000000001
[ 10.771593] x9 : 0000000000000000 x8 : 00000000000000f4
[ 10.771596] x7 : 6bff6264632c6264 x6 : 0000000000008000
[ 10.771600] x5 : 0080000000000000 x4 : 0000000000000001
[ 10.771603] x3 : 0000000000000008 x2 : 0000000000000001
[ 10.771608] x1 : 0000000000000000 x0 : 00000000000000f4
[ 10.771613] Call trace:
[ 10.771617] _raw_spin_lock_irq+0x4c/0xa0
[ 10.771620] __pm_runtime_disable+0x30/0x130
[ 10.771657] mtk_vcodec_probe+0x69c/0x728 [mtk_vcodec_dec 800cc929d6631f79f9b273254c8db94d0d3500dc]
[ 10.771662] platform_drv_probe+0x9c/0xbc
[ 10.771665] really_probe+0x13c/0x3a0
[ 10.771668] driver_probe_device+0x84/0xc0
[ 10.771671] device_driver_attach+0x54/0x78
Fixes: ba31a5b39400 ("media: mtk-vcodec: Remove mtk_vcodec_release_dec_pm")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Sat Mar 18 03:56:51 2023 +0000
media: mediatek: vcodec: Force capture queue format to MM21
[ Upstream commit 68c7df527657a9e962da7b5b9c0308557357d8dc ]
While the decoder can produce frames in both MM21 and MT21C formats, only
MM21 is currently supported by userspace tools (like gstreamer and libyuv).
In order to ensure userspace keeps working after the SCP firmware is
updated to support both MM21 and MT21C formats, force the MM21 format for
the capture queue.
This is meant as a stopgap solution while dynamic format switching between
MM21 and MT21C isn't implemented in the driver.
Fixes: 7501edef6b1f ("media: mediatek: vcodec: Different codec using different capture format")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Nicolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nicolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Sat Mar 18 03:56:50 2023 +0000
media: mediatek: vcodec: Make MM21 the default capture format
[ Upstream commit 6d020d81b91af80a977061e82de25cafa4456af5 ]
Given that only the MM21 capture format is supported by userspace tools
(like gstreamer and libyuv), make it the default capture format.
This allows us to force the MM21 format even when a MM21 and MT21C capable
firmware is available (which is needed while dynamic format switching isn't
implemented in the driver), without causing the following regressions on
v4l2-compliance:
fail: v4l2-test-formats.cpp(478): pixelformat 3132544d (MT21) for buftype 9 not reported by ENUM_FMT
test VIDIOC_G_FMT: FAIL
fail: v4l2-test-formats.cpp(478): pixelformat 3132544d (MT21) for buftype 9 not reported by ENUM_FMT
test VIDIOC_TRY_FMT: FAIL
fail: v4l2-test-formats.cpp(478): pixelformat 3132544d (MT21) for buftype 9 not reported by ENUM_FMT
test VIDIOC_S_FMT: FAIL
Fixes: 7501edef6b1f ("media: mediatek: vcodec: Different codec using different capture format")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Nicolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nicolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Wed Feb 1 07:33:15 2023 +0000
media: mediatek: vcodec: making sure queue_work successfully
[ Upstream commit 2e0ef56d81cb2569624d288b7e95a8a2734a7c74 ]
Putting core work to work queue using queue_work maybe fail, call
queue_work again when the count of core work in work queue is less
than core_list_cnt, making sure all the buffer in core list can be
scheduled.
Fixes: 365e4ba01df4 ("media: mtk-vcodec: Add work queue for core hardware decode")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Wed Feb 1 07:33:12 2023 +0000
media: mediatek: vcodec: move lat_buf to the top of core list
[ Upstream commit 2cfca6c1bf8074175ea7a3b6b47f77ebdef8f701 ]
Current instance will decode done when begin to wait lat buf full,
move the lat_buf of current instance to the top of core list to make
sure current instance's lat_buf will be used firstly.
Fixes: 365e4ba01df4 ("media: mtk-vcodec: Add work queue for core hardware decode")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Wed Feb 1 07:33:14 2023 +0000
media: mediatek: vcodec: remove unused lat_buf
[ Upstream commit af50b13dd3d7d5dbc1f08add1c462398e926a053 ]
Remove unused lat_buf from core list, or leading to core list access
NULL point.
Fixes: 365e4ba01df4 ("media: mtk-vcodec: Add work queue for core hardware decode")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pin-yen Lin <treapking@chromium.org>
Date: Tue Mar 14 10:22:41 2023 +0000
media: mediatek: vcodec: Use 4K frame size when supported by stateful decoder
[ Upstream commit e25528e1dbe52784ac250071653104a8adc848e2 ]
After commit b018be06f3c7 ("media: mediatek: vcodec: Read max resolution
from dec_capability"), the stateful video decoder driver never really
sets its output frame size to 4K.
Parse the decoder capability reported by the firmware, and update the
output frame size in mtk_init_vdec_params to enable 4K frame size when
available.
Fixes: b018be06f3c7 ("media: mediatek: vcodec: Read max resolution from dec_capability")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Wed Feb 1 07:33:11 2023 +0000
media: mediatek: vcodec: using each instance lat_buf count replace core ready list
[ Upstream commit f7a3780cf96925670736582b9a623a2c9ffb4166 ]
Core Hardware decoder depends on each instance lat_buf count,
calling queue_work decode again when the lat_buf count of each instance
isn't zero.
Fixes: 365e4ba01df4 ("media: mtk-vcodec: Add work queue for core hardware decode")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: kyrie wu <kyrie.wu@mediatek.com>
Date: Fri Mar 10 06:23:51 2023 +0000
media: mtk-jpeg: Fixes jpeg enc&dec worker sw flow
[ Upstream commit 86379bd9d399e2c5fd638a869af223d4910725c3 ]
1. Move removing buffer after sw setting and before hw setting
in enc&dec worker to prevents the operation of removing
the buffer twice if the sw setting fails.
2. Remove the redundant operation of queue work in the
jpegenc irq handler because the jpegenc worker has called
v4l2_m2m_job_finish to do it.
Fixes: 5fb1c2361e56 ("mtk-jpegenc: add jpeg encode worker interface")
Fixes: dedc21500334 ("media: mtk-jpegdec: add jpeg decode worker interface")
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: irui wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: kyrie wu <kyrie.wu@mediatek.com>
Date: Fri Mar 10 06:23:49 2023 +0000
media: mtk-jpeg: Fixes jpeghw multi-core judgement
[ Upstream commit 75c38caf66a10983acc5a59069bfc9492c43d682 ]
some chips have multi-hw, but others have only one,
modify the condition of multi-hw judgement
Fixes: 934e8bccac95 ("mtk-jpegenc: support jpegenc multi-hardware")
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: irui wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ricardo Ribalda <ribalda@chromium.org>
Date: Thu Mar 23 23:44:20 2023 +0100
media: ov8856: Do not check for for module version
commit 5a4e1b5aed2a36a10d6a3b30fafb6b3bf41c3186 upstream.
It the device is probed in non-zero ACPI D state, the module
identification is delayed until the first streamon.
The module identification has two parts: deviceID and version. To rea
the version we have to enable OTP read. This cannot be done during
streamon, becase it modifies REG_MODE_SELECT.
Since the driver has the same behaviour for all the module versions, do
not read the module version from the sensor's OTP.
Cc: stable@vger.kernel.org
Fixes: 0e014f1a8d54 ("media: ov8856: support device probe in non-zero ACPI D state")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Date: Thu Feb 9 14:52:45 2023 +0100
media: platform: mtk-mdp3: Add missing check and free for ida_alloc
[ Upstream commit d00f592250782538cda87745607695b0fe27dcd4 ]
Add the check for the return value of the ida_alloc in order to avoid
NULL pointer dereference.
Moreover, free allocated "ctx->id" if mdp_m2m_open fails later in order
to avoid memory leak.
Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Moudy Ho <moudy.ho@mediatek.com>
Date: Mon Mar 27 11:13:24 2023 +0800
media: platform: mtk-mdp3: fix potential frame size overflow in mdp_try_fmt_mplane()
[ Upstream commit 4168720753ce6c14c5d3a35302fc2e1841383443 ]
Fix overflow risk when setting certain formats whose frame size exceeds
a RGB24 with 7723x7723 resolution.
For example, a 7723x7724 RGB24 frame:
1. bpl (byte per line) = 7723 * 3.
2. Overflow occurs when bpl * 7724 * depth.
Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Fainelli <f.fainelli@gmail.com>
Date: Fri Mar 24 13:38:33 2023 -0700
media: rc: gpio-ir-recv: Fix support for wake-up
[ Upstream commit 9c592f8ab114875fdb3b2040f01818e53de44991 ]
The driver was intended from the start to be a wake-up source for the
system, however due to the absence of a suitable call to
device_set_wakeup_capable(), the device_may_wakeup() call used to decide
whether to enable the GPIO interrupt as a wake-up source would never
happen. Lookup the DT standard "wakeup-source" property and call
device_init_wakeup() to ensure the device is flagged as being wakeup
capable.
Reported-by: Matthew Lear <matthew.lear@broadcom.com>
Fixes: fd0f6851eb46 ("[media] rc: Add support for GPIO based IR Receiver driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Sun Mar 26 16:31:19 2023 +0200
media: rcar_fdp1: Convert to platform remove callback returning void
[ Upstream commit 0e82d3715fd208de567b8e4307fbf91ae5e57db4 ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: c766c90faf93 ("media: rcar_fdp1: Fix refcount leak in probe and remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Fri Jan 6 11:58:09 2023 +0400
media: rcar_fdp1: Fix refcount leak in probe and remove function
[ Upstream commit c766c90faf93897b77c9c5daa603cffab85ba907 ]
rcar_fcp_get() take reference, which should be balanced with
rcar_fcp_put(). Add missing rcar_fcp_put() in fdp1_remove and
the error paths of fdp1_probe() to fix this.
Fixes: 4710b752e029 ("[media] v4l: Add Renesas R-Car FDP1 Driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[hverkuil: resolve merge conflict, remove() is now void]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zheng Wang <zyytlz.wz@163.com>
Date: Mon Mar 13 16:42:20 2023 +0000
media: rkvdec: fix use after free bug in rkvdec_remove
[ Upstream commit 3228cec23b8b29215e18090c6ba635840190993d ]
In rkvdec_probe, rkvdec->watchdog_work is bound with
rkvdec_watchdog_func. Then rkvdec_vp9_run may
be called to start the work.
If we remove the module which will call rkvdec_remove
to make cleanup, there may be a unfinished work.
The possible sequence is as follows, which will
cause a typical UAF bug.
Fix it by canceling the work before cleanup in rkvdec_remove.
CPU0 CPU1
|rkvdec_watchdog_func
rkvdec_remove |
rkvdec_v4l2_cleanup|
v4l2_m2m_release |
kfree(m2m_dev); |
|
| v4l2_m2m_get_curr_priv
| m2m_dev->curr_ctx //use
Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zheng Wang <zyytlz.wz@163.com>
Date: Sat Mar 18 16:50:23 2023 +0800
media: saa7134: fix use after free bug in saa7134_finidev due to race condition
[ Upstream commit 30cf57da176cca80f11df0d9b7f71581fe601389 ]
In saa7134_initdev, it will call saa7134_hwinit1. There are three
function invoking here: saa7134_video_init1, saa7134_ts_init1
and saa7134_vbi_init1.
All of them will init a timer with same function. Take
saa7134_video_init1 as an example. It'll bound &dev->video_q.timeout
with saa7134_buffer_timeout.
In buffer_activate, the timer funtcion is started.
If we remove the module or device which will call saa7134_finidev
to make cleanup, there may be a unfinished work. The
possible sequence is as follows, which will cause a
typical UAF bug.
Fix it by canceling the timer works accordingly before cleanup in
saa7134_finidev.
CPU0 CPU1
|saa7134_buffer_timeout
saa7134_finidev |
kfree(dev); |
|
| saa7134_buffer_next
| //use dev
Fixes: 1e7126b4a86a ("media: saa7134: Convert timers to use timer_setup()")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sakari Ailus <sakari.ailus@linux.intel.com>
Date: Tue Mar 7 15:49:44 2023 +0200
media: v4l: async: Return async sub-devices to subnotifier list
[ Upstream commit 5276c9df9c2ab9a43b534bfb56bdb10899cd3a22 ]
When an async notifier is unregistered, the async sub-devices in the
notifier's done list will disappear with the notifier. However this is
currently also done to the sub-notifiers that remain registered. Their
sub-devices only need to be unbound while the async sub-devices themselves
need to be returned to the sub-notifier's waiting list. Do this now.
Fixes: 2cab00bb076b ("media: v4l: async: Allow binding notifiers to sub-devices")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Javier Martinez Canillas <javierm@redhat.com>
Date: Fri Feb 10 09:18:35 2023 +0100
media: venus: dec: Fix capture formats enumeration order
[ Upstream commit a9d45ec74c8e68aaafe90191928eddbf79f4644f ]
Commit 9593126dae3e ("media: venus: Add a handling of QC08C compressed
format") and commit cef92b14e653 ("media: venus: Add a handling of QC10C
compressed format") added support for the QC08C and QC10C compressed
formats respectively.
But these also caused a regression, because the new formats where added
at the beginning of the vdec_formats[] array and the vdec_inst_init()
function sets the default format output and capture using fixed indexes
of that array:
static void vdec_inst_init(struct venus_inst *inst)
{
...
inst->fmt_out = &vdec_formats[8];
inst->fmt_cap = &vdec_formats[0];
...
}
Since now V4L2_PIX_FMT_NV12 is not the first entry in the array anymore,
the default capture format is not set to that as it was done before.
Both commits changed the first index to keep inst->fmt_out default format
set to V4L2_PIX_FMT_H264, but did not update the latter to keep .fmt_out
default format set to V4L2_PIX_FMT_NV12.
Rather than updating the index to the current V4L2_PIX_FMT_NV12 position,
let's reorder the entries so that this format is the first entry again.
This would also make VIDIOC_ENUM_FMT report the V4L2_PIX_FMT_NV12 format
with an index 0 as it did before the QC08C and QC10C formats were added.
Fixes: 9593126dae3e ("media: venus: Add a handling of QC08C compressed format")
Fixes: cef92b14e653 ("media: venus: Add a handling of QC10C compressed format")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michał Krawczyk <mk@semihalf.com>
Date: Mon Jan 30 13:54:18 2023 +0000
media: venus: dec: Fix handling of the start cmd
[ Upstream commit 50248ad9f190d527cbd578190ca769729518b703 ]
The decoder driver should clear the last_buffer_dequeued flag of the
capture queue upon receiving V4L2_DEC_CMD_START.
The last_buffer_dequeued flag is set upon receiving EOS (which always
happens upon receiving V4L2_DEC_CMD_STOP).
Without this patch, after issuing the V4L2_DEC_CMD_STOP and
V4L2_DEC_CMD_START, the vb2_dqbuf() function will always fail, even if
the buffers are completed by the hardware.
Fixes: beac82904a87 ("media: venus: make decoder compliant with stateful codec API")
Signed-off-by: Michał Krawczyk <mk@semihalf.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Fri Jan 20 22:20:31 2023 +0200
media: vsp1: Replace vb2_is_streaming() with vb2_start_streaming_called()
[ Upstream commit 52d8caca3d533cc499f1255be25576ffd936ec95 ]
The vsp1 driver uses the vb2_is_streaming() function in its .buf_queue()
handler to check if the .start_streaming() operation has been called,
and decide whether to just add the buffer to an internal queue, or also
trigger a hardware run. vb2_is_streaming() relies on the vb2_queue
structure's streaming field, which used to be set only after calling the
.start_streaming() operation.
Commit a10b21532574 ("media: vb2: add (un)prepare_streaming queue ops")
changed this, setting the .streaming field in vb2_core_streamon() before
enqueuing buffers to the driver and calling .start_streaming(). This
broke the vsp1 driver which now believes that .start_streaming() has
been called when it hasn't, leading to a crash:
[ 881.058705] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[ 881.067495] Mem abort info:
[ 881.070290] ESR = 0x0000000096000006
[ 881.074042] EC = 0x25: DABT (current EL), IL = 32 bits
[ 881.079358] SET = 0, FnV = 0
[ 881.082414] EA = 0, S1PTW = 0
[ 881.085558] FSC = 0x06: level 2 translation fault
[ 881.090439] Data abort info:
[ 881.093320] ISV = 0, ISS = 0x00000006
[ 881.097157] CM = 0, WnR = 0
[ 881.100126] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004fa51000
[ 881.106573] [0000000000000020] pgd=080000004f36e003, p4d=080000004f36e003, pud=080000004f7ec003, pmd=0000000000000000
[ 881.117217] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
[ 881.123494] Modules linked in: rcar_fdp1 v4l2_mem2mem
[ 881.128572] CPU: 0 PID: 1271 Comm: yavta Tainted: G B 6.2.0-rc1-00023-g6c94e2e99343 #556
[ 881.138061] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
[ 881.145981] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 881.152951] pc : vsp1_dl_list_add_body+0xa8/0xe0
[ 881.157580] lr : vsp1_dl_list_add_body+0x34/0xe0
[ 881.162206] sp : ffff80000c267710
[ 881.165522] x29: ffff80000c267710 x28: ffff000010938ae8 x27: ffff000013a8dd98
[ 881.172683] x26: ffff000010938098 x25: ffff000013a8dc00 x24: ffff000010ed6ba8
[ 881.179841] x23: ffff00000faa4000 x22: 0000000000000000 x21: 0000000000000020
[ 881.186998] x20: ffff00000faa4000 x19: 0000000000000000 x18: 0000000000000000
[ 881.194154] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 881.201309] x14: 0000000000000000 x13: 746e696174206c65 x12: ffff70000157043d
[ 881.208465] x11: 1ffff0000157043c x10: ffff70000157043c x9 : dfff800000000000
[ 881.215622] x8 : ffff80000ab821e7 x7 : 00008ffffea8fbc4 x6 : 0000000000000001
[ 881.222779] x5 : ffff80000ab821e0 x4 : ffff70000157043d x3 : 0000000000000020
[ 881.229936] x2 : 0000000000000020 x1 : ffff00000e4f6400 x0 : 0000000000000000
[ 881.237092] Call trace:
[ 881.239542] vsp1_dl_list_add_body+0xa8/0xe0
[ 881.243822] vsp1_video_pipeline_run+0x270/0x2a0
[ 881.248449] vsp1_video_buffer_queue+0x1c0/0x1d0
[ 881.253076] __enqueue_in_driver+0xbc/0x260
[ 881.257269] vb2_start_streaming+0x48/0x200
[ 881.261461] vb2_core_streamon+0x13c/0x280
[ 881.265565] vb2_streamon+0x3c/0x90
[ 881.269064] vsp1_video_streamon+0x2fc/0x3e0
[ 881.273344] v4l_streamon+0x50/0x70
[ 881.276844] __video_do_ioctl+0x2bc/0x5d0
[ 881.280861] video_usercopy+0x2a8/0xc80
[ 881.284704] video_ioctl2+0x20/0x40
[ 881.288201] v4l2_ioctl+0xa4/0xc0
[ 881.291525] __arm64_sys_ioctl+0xe8/0x110
[ 881.295543] invoke_syscall+0x68/0x190
[ 881.299303] el0_svc_common.constprop.0+0x88/0x170
[ 881.304105] do_el0_svc+0x4c/0xf0
[ 881.307430] el0_svc+0x4c/0xa0
[ 881.310494] el0t_64_sync_handler+0xbc/0x140
[ 881.314773] el0t_64_sync+0x190/0x194
[ 881.318450] Code: d50323bf d65f03c0 91008263 f9800071 (885f7c60)
[ 881.324551] ---[ end trace 0000000000000000 ]---
[ 881.329173] note: yavta[1271] exited with preempt_count 1
A different regression report sent to the linux-media mailing list ([1])
was answered with a claim that the vb2_is_streaming() function has never
been meant for this purpose. The document of the function, as well as of
the struct vb2_queue streaming field, is sparse, so this claim may be
hard to verify.
The information needed by the vsp1 driver to decide how to process
queued buffers is also available from the vb2_start_streaming_called()
function. Use it instead of vb2_is_streaming() to fix the problem.
[1] https://lore.kernel.org/linux-media/545610e7-3446-2b82-60dc-7385fea3774f@redhat.com/
Fixes: a10b21532574 ("media: vb2: add (un)prepare_streaming queue ops")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Charles Keepax <ckeepax@opensource.cirrus.com>
Date: Thu Mar 23 13:41:38 2023 +0000
mfd: arizona-spi: Add missing MODULE_DEVICE_TABLE
[ Upstream commit 972c91fd7beddc3f19c8c855f6e60e7dbd435cbd ]
This patch adds missing MODULE_DEVICE_TABLE definition
which generates correct modalias for automatic loading
of this driver when it is built as a module.
Fixes: 3f65555c417c ("mfd: arizona: Split of_match table into I2C and SPI versions")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230323134138.834369-1-ckeepax@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Colin Foster <colin.foster@in-advantage.com>
Date: Wed Mar 22 07:11:30 2023 -0700
mfd: ocelot-spi: Fix unsupported bulk read
[ Upstream commit f0484d2f80a72022b7fac72bcb406392900ef1eb ]
Ocelot chips (VSC7511, VSC7512, VSC7513, VSC7514) don't support bulk read
operations over SPI.
Many SPI buses have hardware that can optimize consecutive reads.
Essentially an address is written to the chip, and if the SPI controller
continues to toggle the clock, subsequent register values are reported.
This can lead to significant optimizations, because the time between
"address is written to the chip" and "chip starts to report data" can often
take a fixed amount of time.
When support for Ocelot chips were added in commit f3e893626abe ("mfd:
ocelot: Add support for the vsc7512 chip via spi") it was believed that
this optimization was supported. However it is not.
Most register transactions with the Ocelot chips are not done in bulk, so
this bug could go unnoticed. The one scenario where bulk register
operations _are_ performed is when polling port statistics counters, which
was added in commit d87b1c08f38a ("net: mscc: ocelot: use bulk reads for
stats").
Things get slightly more complicated here...
A bug was introduced in commit d4c367650704 ("net: mscc: ocelot: keep
ocelot_stat_layout by reg address, not offset") that broke the optimization
of bulk reads. This means that when Ethernet support for the VSC7512 chip
was added in commit 3d7316ac81ac ("net: dsa: ocelot: add external ocelot
switch control") things were actually working "as expected".
The bulk read opmtimization was discovered, and fixed in commit
6acc72a43eac ("net: mscc: ocelot: fix stats region batching") and the
timing optimizations for SPI were noticed. A bulk read went from ~14ms to
~2ms. But this timing improvement came at the cost of every register
reading zero due the fact that bulk reads don't work.
The read timings increase back to 13-14ms, but that's a price worth paying
in order to receive valid data. This is verified in a DSA setup (cpsw-new
switch tied to port 0 on the VSC7512, after having been running overnight)
Rx Octets: 16222055 # Counters from CPSW switch
Tx Octets: 12034702
Net Octets: 28256757
p00_rx_octets: 12034702 # Counters from Ocelot switch
p00_rx_frames_below_65_octets: 0
p00_rx_frames_65_to_127_octets: 88188
p00_rx_frames_128_to_255_octets: 13
p00_rx_frames_256_to_511_octets: 0
p00_rx_frames_512_to_1023_octets: 0
p00_rx_frames_over_1526_octets: 3306
p00_tx_octets: 16222055
Fixes: f3e893626abe ("mfd: ocelot: Add support for the vsc7512 chip via spi")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230322141130.2531256-1-colin.foster@in-advantage.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Date: Mon Feb 20 12:25:46 2023 +0100
mfd: tqmx86: Correct board names for TQMxE39x
[ Upstream commit f376c479668557bcc2fd9e9fbc0f53e7819a11cd ]
It seems that this driver was developed based on preliminary documentation.
Report the correct names for all TQMxE39x variants, as they are used by
the released hardware revisions:
- Fix names for TQMxE39C1/C2 board IDs
- Distinguish TQMxE39M and TQMxE39S, which use the same board ID
The TQMxE39M/S are distinguished using the SAUC (Sanctioned Alternate
Uses Configuration) register of the GPIO controller. This also prepares
for the correct handling of the differences between the GPIO controllers
of our COMe and SMARC modules.
Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/aca9a7cb42a85181bcb456c437554d2728e708ec.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Date: Mon Feb 20 12:25:44 2023 +0100
mfd: tqmx86: Do not access I2C_DETECT register through io_base
[ Upstream commit 1be1b23696b3d4b0231c694f5e0767b4471d33a9 ]
The I2C_DETECT register is at IO port 0x1a7, which is outside the range
passed to devm_ioport_map() for io_base, and was only working because
there aren't actually any bounds checks for IO port accesses.
Extending the range does not seem like a good solution here, as it would
then conflict with the IO resource assigned to the I2C controller. As
this is just a one-off access during probe, use a simple inb() instead.
While we're at it, drop the unused define TQMX86_REG_I2C_INT_EN.
Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/e8300a30f0791afb67d79db8089fb6004855f378.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Date: Mon Feb 20 12:25:45 2023 +0100
mfd: tqmx86: Specify IO port register range more precisely
[ Upstream commit 051c69ff4f607aa114c7bbdd7c41ed881367aeee ]
Registers 0x160..0x17f are unassigned. Use 0x180 as base register and
update offets accordingly.
Also change the size of the range to include 0x19f. While 0x19f is
currently reserved for future extensions, so are several of the previous
registers up to 0x19e, and it is weird to leave out just the last one.
Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/db4677ac318b1283c8956f637f409995a30a31c3.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiaxun Yang <jiaxun.yang@flygoat.com>
Date: Tue Apr 11 12:14:26 2023 +0100
MIPS: fw: Allow firmware to pass a empty env
commit ee1809ed7bc456a72dc8410b475b73021a3a68d5 upstream.
fw_getenv will use env entry to determine style of env,
however it is legal for firmware to just pass a empty list.
Check if first entry exist before running strchr to avoid
null pointer dereference.
Cc: stable@vger.kernel.org
Link: https://github.com/clbr/n64bootloader/issues/5
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lorenzo Stoakes <lstoakes@gmail.com>
Date: Sun Apr 30 16:07:07 2023 +0100
mm/mempolicy: correctly update prev when policy is equal on mbind
commit 00ca0f2e86bf40b016a646e6323a8941a09cf106 upstream.
The refactoring in commit f4e9e0e69468 ("mm/mempolicy: fix use-after-free
of VMA iterator") introduces a subtle bug which arises when attempting to
apply a new NUMA policy across a range of VMAs in mbind_range().
The refactoring passes a **prev pointer to keep track of the previous VMA
in order to reduce duplication, and in all but one case it keeps this
correctly updated.
The bug arises when a VMA within the specified range has an equivalent
policy as determined by mpol_equal() - which unlike other cases, does not
update prev.
This can result in a situation where, later in the iteration, a VMA is
found whose policy does need to change. At this point, vma_merge() is
invoked with prev pointing to a VMA which is before the previous VMA.
Since vma_merge() discovers the curr VMA by looking for the one
immediately after prev, it will now be in a situation where this VMA is
incorrect and the merge will not proceed correctly.
This is checked in the VM_WARN_ON() invariant case with end >
curr->vm_end, which, if a merge is possible, results in a warning (if
CONFIG_DEBUG_VM is specified).
I note that vma_merge() performs these invariant checks only after
merge_prev/merge_next are checked, which is debatable as it hides this
issue if no merge is possible even though a buggy situation has arisen.
The solution is simply to update the prev pointer even when policies are
equal.
This caused a bug to arise in the 6.2.y stable tree, and this patch
resolves this bug.
Link: https://lkml.kernel.org/r/83f1d612acb519d777bebf7f3359317c4e7f4265.1682866629.git.lstoakes@gmail.com
Fixes: f4e9e0e69468 ("mm/mempolicy: fix use-after-free of VMA iterator")
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202304292203.44ddeff6-oliver.sang@intel.com
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jan Kara <jack@suse.cz>
Date: Fri Apr 28 14:41:40 2023 +0200
mm: do not reclaim private data from pinned page
commit d824ec2a154677f63c56cc71ffe4578274f6e32e upstream.
If the page is pinned, there's no point in trying to reclaim it.
Furthermore if the page is from the page cache we don't want to reclaim
fs-private data from the page because the pinning process may be writing
to the page at any time and reclaiming fs private info on a dirty page can
upset the filesystem (see link below).
Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Georgii Kruglov <georgy.kruglov@yandex.ru>
Date: Tue Mar 21 23:37:15 2023 +0300
mmc: sdhci-of-esdhc: fix quirk to ignore command inhibit for data
[ Upstream commit 0dd8316037a2a6d85b2be208bef9991de7b42170 ]
If spec_reg is equal to 'SDHCI_PRESENT_STATE', esdhc_readl_fixup()
fixes up register value and returns it immediately. As a result, the
further block
(spec_reg == SDHCI_PRESENT_STATE)
&&(esdhc->quirk_ignore_data_inhibit == true),
is never executed.
The patch merges the second block into the first one.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1f1929f3f2fa ("mmc: sdhci-of-esdhc: add quirk to ignore command inhibit for data")
Signed-off-by: Georgii Kruglov <georgy.kruglov@yandex.ru>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230321203715.3975-1-georgy.kruglov@yandex.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Date: Wed Mar 15 13:52:56 2023 +0100
module/decompress: Never use kunmap() for local un-mappings
[ Upstream commit 3c17655ab13704582fe25e8ea3200a9b2f8bf20a ]
Use kunmap_local() to unmap pages locally mapped with kmap_local_page().
kunmap_local() must be called on the kernel virtual address returned by
kmap_local_page(), differently from how we use kunmap() which instead
expects the mapped page as its argument.
In module_zstd_decompress() we currently map with kmap_local_page() and
unmap with kunmap(). This breaks the code and so it should be fixed.
Cc: Piotr Gorski <piotrgorski@cachyos.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Fixes: 169a58ad824d ("module/decompress: Support zstd in-kernel decompression")
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Piotr Gorski <piotrgorski@cachyos.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Wang <sean.wang@mediatek.com>
Date: Wed Apr 12 05:23:11 2023 +0800
mt76: mt7921: fix kernel panic by accessing unallocated eeprom.data
[ Upstream commit 12db28c3ef31f719bd18fa186a40bb152e6a527c ]
The MT7921 driver no longer uses eeprom.data, but the relevant code has not
been removed completely since
commit 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability").
This could result in potential invalid memory access.
To fix the kernel panic issue in mt7921, it is necessary to avoid accessing
unallocated eeprom.data which can lead to invalid memory access.
Furthermore, it is possible to entirely eliminate the
mt7921_mcu_parse_eeprom function and solely depend on
mt7921_mcu_parse_response to divide the RxD header.
[2.702735] BUG: kernel NULL pointer dereference, address: 0000000000000550
[2.702740] #PF: supervisor write access in kernel mode
[2.702741] #PF: error_code(0x0002) - not-present page
[2.702743] PGD 0 P4D 0
[2.702747] Oops: 0002 [#1] PREEMPT SMP NOPTI
[2.702755] RIP: 0010:mt7921_mcu_parse_response+0x147/0x170 [mt7921_common]
[2.702758] RSP: 0018:ffffae7c00fef828 EFLAGS: 00010286
[2.702760] RAX: ffffa367f57be024 RBX: ffffa367cc7bf500 RCX: 0000000000000000
[2.702762] RDX: 0000000000000550 RSI: 0000000000000000 RDI: ffffa367cc7bf500
[2.702763] RBP: ffffae7c00fef840 R08: ffffa367cb167000 R09: 0000000000000005
[2.702764] R10: 0000000000000000 R11: ffffffffc04702e4 R12: ffffa367e8329f40
[2.702766] R13: 0000000000000000 R14: 0000000000000001 R15: ffffa367e8329f40
[2.702768] FS: 000079ee6cf20c40(0000) GS:ffffa36b2f940000(0000) knlGS:0000000000000000
[2.702769] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[2.702775] CR2: 0000000000000550 CR3: 00000001233c6004 CR4: 0000000000770ee0
[2.702776] PKRU: 55555554
[2.702777] Call Trace:
[2.702782] mt76_mcu_skb_send_and_get_msg+0xc3/0x11e [mt76 <HASH:1bc4 5>]
[2.702785] mt7921_run_firmware+0x241/0x853 [mt7921_common <HASH:6a2f 6>]
[2.702789] mt7921e_mcu_init+0x2b/0x56 [mt7921e <HASH:d290 7>]
[2.702792] mt7921_register_device+0x2eb/0x5a5 [mt7921_common <HASH:6a2f 6>]
[2.702795] ? mt7921_irq_tasklet+0x1d4/0x1d4 [mt7921e <HASH:d290 7>]
[2.702797] mt7921_pci_probe+0x2d6/0x319 [mt7921e <HASH:d290 7>]
[2.702799] pci_device_probe+0x9f/0x12a
Fixes: 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Walle <michael@walle.cc>
Date: Wed Mar 8 09:20:20 2023 +0100
mtd: core: fix error path for nvmem provider
commit e0489f6e221f5ddee6cb3bd51b992b790c5fa4b9 upstream.
If mtd_otp_nvmem_add() fails, the partitions won't be removed
because there is simply no call to del_mtd_partitions().
Unfortunately, add_mtd_partitions() will print all partitions to
the kernel console. If mtd_otp_nvmem_add() returns -EPROBE_DEFER
this would print the partitions multiple times to the kernel
console. Instead move mtd_otp_nvmem_add() to the beginning of the
function.
Fixes: 4b361cfa8624 ("mtd: core: add OTP nvmem provider support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-3-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michael Walle <michael@walle.cc>
Date: Wed Mar 8 09:20:19 2023 +0100
mtd: core: fix nvmem error reporting
commit 8bd1d24e6ca3c599dd455b0e1b22f77bab8290eb upstream.
The master MTD will only have an associated device if
CONFIG_MTD_PARTITIONED_MASTER is set, thus we cannot use dev_err() on
mtd->dev. Instead use the parent device which is the physical flash
memory.
Fixes: 4b361cfa8624 ("mtd: core: add OTP nvmem provider support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-2-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michael Walle <michael@walle.cc>
Date: Wed Mar 8 09:20:18 2023 +0100
mtd: core: provide unique name for nvmem device, take two
commit 1cd9ceaa5282ff10ea20a7fbadde5a476a1cc99e upstream.
Commit c048b60d39e1 ("mtd: core: provide unique name for nvmem device")
tries to give the nvmem device a unique name, but fails badly if the mtd
device doesn't have a "struct device" associated with it, i.e. if
CONFIG_MTD_PARTITIONED_MASTER is not set. This will result in the name
"(null)-user-otp", which is not unique. It seems the best we can do is
to use the compatible name together with a unique identifier added by
the nvmem subsystem by using NVMEM_DEVID_AUTO.
Fixes: c048b60d39e1 ("mtd: core: provide unique name for nvmem device")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-1-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tudor Ambarus <tudor.ambarus@linaro.org>
Date: Fri Mar 31 07:46:04 2023 +0000
mtd: spi-nor: core: Update flash's current address mode when changing address mode
commit 37513c56139b79dd43c1774513c28f8ab2b05224 upstream.
The bug was obswerved while reading code. There are not many users of
addr_mode_nbytes. Anyway, we should update the flash's current address
mode when changing the address mode, fix it. We don't care for now about
the set_4byte_addr_mode(nor, false) from spi_nor_restore(), as it is
used at driver remove and shutdown.
Fixes: d7931a215063 ("mtd: spi-nor: core: Track flash's internal address mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230331074606.3559258-9-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chris Mi <cmi@nvidia.com>
Date: Fri Mar 10 11:06:48 2023 +0200
net/mlx5: E-switch, Create per vport table based on devlink encap mode
[ Upstream commit fd745f4c0abe41ebb09d11bf622b054a0f3e7b49 ]
Currently when creating per vport table, create flags are hardcoded.
Devlink encap mode is set based on user input and HW capability.
Create per vport table based on devlink encap mode.
Fixes: c796bb7cd230 ("net/mlx5: E-switch, Generalize per vport table API")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chris Mi <cmi@nvidia.com>
Date: Fri Mar 10 09:56:08 2023 +0200
net/mlx5: E-switch, Don't destroy indirect table in split rule
[ Upstream commit 4c8189302567f75099a336b0efcff8291ec86ff4 ]
Source port rewrite (forward to ovs internal port or statck device) isn't
supported in the rule of split action. So there is no indirect table in
split rule. The cited commit destroyes indirect table in split rule. The
indirect table for other rules will be destroyed wrongly. It will cause
traffic loss.
Fix it by removing the destroy function in split rule. And also remove
the destroy function in error flow.
Fixes: 10742efc20a4 ("net/mlx5e: VF tunnel TX traffic offloading")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiri Pirko <jiri@resnulli.us>
Date: Thu Jan 26 13:23:17 2023 +0100
net/mlx5: Remove "recovery" arg from mlx5_load_one() function
[ Upstream commit 5977ac3910f1cbaf44dca48179118b25c206ac29 ]
mlx5_load_one() is always called with recovery==false, so remove the
unneeded function arg.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: dfad99750c0f ("net/mlx5: Use recovery timeout on sync reset flow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiri Pirko <jiri@resnulli.us>
Date: Thu Jan 26 13:39:09 2023 +0100
net/mlx5: Suspend auxiliary devices only in case of PCI device suspend
[ Upstream commit 72ed5d5624af384eaf74d84915810d54486a75e2 ]
The original behavior introduced by commit c6acd629eec7 ("net/mlx5e: Add
support for devlink-port in non-representors mode") correctly
re-instantiated uplink devlink port and related netdevice during devlink
reload. However with migration to auxiliary devices, this behaviour
changed.
Restore the original behaviour and tear down auxiliary devices
completely during devlink reload.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: dfad99750c0f ("net/mlx5: Use recovery timeout on sync reset flow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Moshe Shemesh <moshe@nvidia.com>
Date: Sun Apr 2 06:49:53 2023 +0300
net/mlx5: Use recovery timeout on sync reset flow
[ Upstream commit dfad99750c0f83b0242572a573afa2c055f85b36 ]
Use the same timeout for sync reset flow and health recovery flow, since
the former involves driver's recovery from firmware reset, which is
similar to health recovery. Otherwise, in some cases, such as a firmware
upgrade on the DPU, the firmware pre-init bit may not be ready within
current timeout and the driver will abort loading back after reset.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Fixes: 37ca95e62ee2 ("net/mlx5: Increase FW pre-init timeout for health recovery")
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vlad Buslov <vladbu@nvidia.com>
Date: Wed Mar 22 09:52:26 2023 +0100
net/mlx5e: Don't clone flow post action attributes second time
[ Upstream commit e9fce818fe003b6c527f25517b9ac08eb4661b5d ]
The code already clones post action attributes in
mlx5e_clone_flow_attr_for_post_act(). Creating another copy in
mlx5e_tc_post_act_add() is a erroneous leftover from original
implementation. Instead, assign handle->attribute to post_attr provided by
the caller. Note that cloning the attribute second time is not just
wasteful but also causes issues like second copy not being properly updated
in neigh update code which leads to following use-after-free:
Feb 21 09:02:00 c-237-177-40-045 kernel: BUG: KASAN: use-after-free in mlx5_cmd_set_fte+0x200d/0x24c0 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_report+0xbb/0x1a0
Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_stack+0x1e/0x40
Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_set_track+0x21/0x30
Feb 21 09:02:00 c-237-177-40-045 kernel: __kasan_kmalloc+0x7a/0x90
Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_stack+0x1e/0x40
Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_set_track+0x21/0x30
Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_free_info+0x2a/0x40
Feb 21 09:02:00 c-237-177-40-045 kernel: ____kasan_slab_free+0x11a/0x1b0
Feb 21 09:02:00 c-237-177-40-045 kernel: page dumped because: kasan: bad access detected
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 8833): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0xf2ff71), err(-22)
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_core 0000:08:00.0 enp8s0f0: Failed to add post action rule
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_core 0000:08:00.0: mlx5e_tc_encap_flows_add:190:(pid 8833): Failed to update flow post acts, -22
Feb 21 09:02:00 c-237-177-40-045 kernel: Call Trace:
Feb 21 09:02:00 c-237-177-40-045 kernel: <TASK>
Feb 21 09:02:00 c-237-177-40-045 kernel: dump_stack_lvl+0x57/0x7d
Feb 21 09:02:00 c-237-177-40-045 kernel: print_report+0x170/0x471
Feb 21 09:02:00 c-237-177-40-045 kernel: ? mlx5_cmd_set_fte+0x200d/0x24c0 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_report+0xbb/0x1a0
Feb 21 09:02:00 c-237-177-40-045 kernel: ? mlx5_cmd_set_fte+0x200d/0x24c0 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_cmd_set_fte+0x200d/0x24c0 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: ? __module_address.part.0+0x62/0x200
Feb 21 09:02:00 c-237-177-40-045 kernel: ? mlx5_cmd_stub_create_flow_table+0xd0/0xd0 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: ? __raw_spin_lock_init+0x3b/0x110
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_cmd_create_fte+0x80/0xb0 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: add_rule_fg+0xe80/0x19c0 [mlx5_core]
--
Feb 21 09:02:00 c-237-177-40-045 kernel: Allocated by task 13476:
Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_stack+0x1e/0x40
Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_set_track+0x21/0x30
Feb 21 09:02:00 c-237-177-40-045 kernel: __kasan_kmalloc+0x7a/0x90
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_packet_reformat_alloc+0x7b/0x230 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_tc_tun_create_header_ipv4+0x977/0xf10 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_attach_encap+0x15b4/0x1e10 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: post_process_attr+0x305/0xa30 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_tc_add_fdb_flow+0x4c0/0xcf0 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_configure_flower+0xcaa/0x4b90 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_rep_setup_tc_cls_flower+0x99/0x1b0 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_rep_setup_tc_cb+0x133/0x1e0 [mlx5_core]
--
Feb 21 09:02:00 c-237-177-40-045 kernel: Freed by task 8833:
Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_stack+0x1e/0x40
Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_set_track+0x21/0x30
Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_free_info+0x2a/0x40
Feb 21 09:02:00 c-237-177-40-045 kernel: ____kasan_slab_free+0x11a/0x1b0
Feb 21 09:02:00 c-237-177-40-045 kernel: __kmem_cache_free+0x1de/0x400
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_packet_reformat_dealloc+0xad/0x100 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_tc_encap_flows_del+0x3c0/0x500 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_rep_update_flows+0x40c/0xa80 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_rep_neigh_update+0x473/0x7a0 [mlx5_core]
Feb 21 09:02:00 c-237-177-40-045 kernel: process_one_work+0x7c2/0x1310
Feb 21 09:02:00 c-237-177-40-045 kernel: worker_thread+0x59d/0xec0
Feb 21 09:02:00 c-237-177-40-045 kernel: kthread+0x28f/0x330
Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Roi Dayan <roid@nvidia.com>
Date: Wed Mar 29 15:24:32 2023 +0300
net/mlx5e: Fix error flow in representor failing to add vport rx rule
[ Upstream commit 0a6b069cc60d68d33b4f6e7dd7f1adc3ec749766 ]
On representor init rx error flow the flow steering pointer is being
released so mlx5e_attach_netdev() doesn't have a valid fs pointer
in its error flow. Make sure the pointer is nullified when released
and add a check in mlx5e_fs_cleanup() to verify fs is not null
as representor cleanup callback would be called anyway.
Fixes: af8bbf730068 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aya Levin <ayal@nvidia.com>
Date: Sun Mar 12 16:37:36 2023 +0200
net/mlx5e: Nullify table pointer when failing to create
[ Upstream commit 1b540decd03acd736693aabb6cb46c71fca38ae6 ]
On failing to create promisc flow steering table, the pointer is
returned with an error. Nullify it so unloading the driver won't try to
destroy a non existing table.
Failing to create promisc table may happen over BF devices when the ARM
side is going through a firmware tear down. The host side start a
reload flow. While the driver unloads, it tries to remove the promisc
table. Remove WARN in this state as it is a valid error flow.
Fixes: 1c46d7409f30 ("net/mlx5e: Optimize promiscuous mode")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Mar 16 01:10:06 2023 +0000
net/packet: annotate accesses to po->xmit
[ Upstream commit b9d83ab8a708f23a4001d60e9d8d0b3be3d9f607 ]
po->xmit can be set from setsockopt(PACKET_QDISC_BYPASS),
while read locklessly.
Use READ_ONCE()/WRITE_ONCE() to avoid potential load/store
tearing issues.
Fixes: d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Mar 16 01:10:08 2023 +0000
net/packet: convert po->auxdata to an atomic flag
[ Upstream commit fd53c297aa7b077ae98a3d3d2d3aa278a1686ba6 ]
po->auxdata can be read while another thread
is changing its value, potentially raising KCSAN splat.
Convert it to PACKET_SOCK_AUXDATA flag.
Fixes: 8dc419447415 ("[PACKET]: Add optional checksum computation for recvmsg")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Mar 16 01:10:07 2023 +0000
net/packet: convert po->origdev to an atomic flag
[ Upstream commit ee5675ecdf7a4e713ed21d98a70c2871d6ebed01 ]
syzbot/KCAN reported that po->origdev can be read
while another thread is changing its value.
We can avoid this splat by converting this field
to an actual bit.
Following patches will convert remaining 1bit fields.
Fixes: 80feaacb8a64 ("[AF_PACKET]: Add option to return orig_dev to userspace.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Davide Caratti <dcaratti@redhat.com>
Date: Thu Apr 20 16:59:46 2023 +0200
net/sched: sch_fq: fix integer overflow of "credit"
[ Upstream commit 7041101ff6c3073fd8f2e99920f535b111c929cb ]
if sch_fq is configured with "initial quantum" having values greater than
INT_MAX, the first assignment of "credit" does signed integer overflow to
a very negative value.
In this situation, the syzkaller script provided by Cristoph triggers the
CPU soft-lockup warning even with few sockets. It's not an infinite loop,
but "credit" wasn't probably meant to be minus 2Gb for each new flow.
Capping "initial quantum" to INT_MAX proved to fix the issue.
v2: validation of "initial quantum" is done in fq_policy, instead of open
coding in fq_change() _ suggested by Jakub Kicinski
Reported-by: Christoph Paasch <cpaasch@apple.com>
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/377
Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7b3a3c7e36d03068707a021760a194a8eb5ad41a.1682002300.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gencen Gan <gangecen@hust.edu.cn>
Date: Mon Apr 24 23:28:01 2023 +0800
net: amd: Fix link leak when verifying config failed
[ Upstream commit d325c34d9e7e38d371c0a299d415e9b07f66a1fb ]
After failing to verify configuration, it returns directly without
releasing link, which may cause memory leak.
Paolo Abeni thinks that the whole code of this driver is quite
"suboptimal" and looks unmainatained since at least ~15y, so he
suggests that we could simply remove the whole driver, please
take it into consideration.
Simon Horman suggests that the fix label should be set to
"Linux-2.6.12-rc2" considering that the problem has existed
since the driver was introduced and the commit above doesn't
seem to exist in net/net-next.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gan Gecen <gangecen@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Thu Apr 20 15:36:07 2023 +0300
net: dpaa: Fix uninitialized variable in dpaa_stop()
[ Upstream commit 461bb5b97049a149278f2c27a3aa12af16da6a2e ]
The return value is not initialized on the success path.
Fixes: 901bdff2f529 ("net: fman: Change return type of disable to void")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/8c9dc377-8495-495f-a4e5-4d2d0ee12f0c@kili.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Date: Sun Mar 19 12:33:29 2023 +0000
net: dsa: qca8k: remove assignment of an_enabled in pcs_get_state()
[ Upstream commit 9ef70d0130f282638b28cfce24222f71ada00c9c ]
pcs_get_state() implementations are not supposed to alter an_enabled.
Remove this assignment.
Fixes: b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of PHYLIB")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1pdsE5-00Dl2l-8F@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sebastian Reichel <sebastian.reichel@collabora.com>
Date: Fri Apr 7 18:11:29 2023 +0200
net: ethernet: stmmac: dwmac-rk: fix optional phy regulator handling
[ Upstream commit db21973263f8c56750cb610f1d5e8bee00a513b9 ]
The usual devm_regulator_get() call already handles "optional"
regulators by returning a valid dummy and printing a warning
that the dummy regulator should be described properly. This
code open coded the same behaviour, but masked any errors that
are not -EPROBE_DEFER and is quite noisy.
This change effectively unmasks and propagates regulators errors
not involving -ENODEV, downgrades the error print to warning level
if no regulator is specified and captures the probe defer message
for /sys/kernel/debug/devices_deferred.
Fixes: 2e12f536635f ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sebastian Reichel <sebastian.reichel@collabora.com>
Date: Fri Apr 7 18:11:28 2023 +0200
net: ethernet: stmmac: dwmac-rk: rework optional clock handling
[ Upstream commit ea449f7fa0bf3fcd02e04a770b9ff707bf5e8f96 ]
The clock requesting code is quite repetitive. Fix this by requesting
the clocks via devm_clk_bulk_get_optional. The optional variant has been
used, since this is effectively what the old code did. The exact clocks
required depend on the platform and configuration. As a side effect
this change adds correct -EPROBE_DEFER handling.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 7ad269ea1a2b ("GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Date: Wed Mar 15 14:46:43 2023 +0000
net: pcs: xpcs: remove double-read of link state when using AN
[ Upstream commit ef63461caf427a77a04620d74ba90035a712af9c ]
Phylink does not want the current state of the link when reading the
PCS link state - it wants the latched state. Don't double-read the
MII status register. Phylink will re-read as necessary to capture
transient link-down events as of dbae3388ea9c ("net: phylink: Force
retrigger in case of latched link-fail indicator").
The above referenced commit is a dependency for this change, and thus
this change should not be backported to any kernel that does not
contain the above referenced commit.
Fixes: fcb26bd2b6ca ("net: phy: Add Synopsys DesignWare XPCS MDIO module")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Simon Horman <horms@kernel.org>
Date: Mon Apr 3 17:43:16 2023 +0200
net: qrtr: correct types of trace event parameters
[ Upstream commit 054fbf7ff8143d35ca7d3bb5414bb44ee1574194 ]
The arguments passed to the trace events are of type unsigned int,
however the signature of the events used __le32 parameters.
I may be missing the point here, but sparse flagged this and it
does seem incorrect to me.
net/qrtr/ns.c: note: in included file (through include/trace/trace_events.h, include/trace/define_trace.h, include/trace/events/qrtr.h):
./include/trace/events/qrtr.h:11:1: warning: cast to restricted __le32
./include/trace/events/qrtr.h:11:1: warning: restricted __le32 degrades to integer
./include/trace/events/qrtr.h:11:1: warning: restricted __le32 degrades to integer
... (a lot more similar warnings)
net/qrtr/ns.c:115:47: expected restricted __le32 [usertype] service
net/qrtr/ns.c:115:47: got unsigned int service
net/qrtr/ns.c:115:61: warning: incorrect type in argument 2 (different base types)
... (a lot more similar warnings)
Fixes: dfddb54043f0 ("net: qrtr: Add tracepoint support")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230402-qrtr-trace-types-v1-1-92ad55008dd3@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Golle <daniel@makrotopia.org>
Date: Sun Apr 2 12:44:37 2023 +0100
net: sfp: add quirk enabling 2500Base-x for HG MXPD-483II
[ Upstream commit ad651d68cee75e9ac20002254c4e5d09ee67a84b ]
The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
Transceiver type : Ethernet: 1000BASE-LX
...
BR, Nominal : 2600MBd
Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.
https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60
Reported-by: chowtom <chowtom@gmail.com>
Tested-by: chowtom <chowtom@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yan Wang <rk.code@outlook.com>
Date: Wed Apr 19 22:13:46 2023 +0800
net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports
[ Upstream commit 35226750f7ab9d49140d95bc7d38a2a9b0f4fdfc ]
The system hang because of dsa_tag_8021q_port_setup()->
stmmac_vlan_rx_add_vid().
I found in stmmac_drv_probe() that cailing pm_runtime_put()
disabled the clock.
First, when the kernel is compiled with CONFIG_PM=y,The stmmac's
resume/suspend is active.
Secondly,stmmac as DSA master,the dsa_tag_8021q_port_setup() function
will callback stmmac_vlan_rx_add_vid when DSA dirver starts. However,
The system is hanged for the stmmac_vlan_rx_add_vid() accesses its
registers after stmmac's clock is closed.
I would suggest adding the pm_runtime_resume_and_get() to the
stmmac_vlan_rx_add_vid().This guarantees that resuming clock output
while in use.
Fixes: b3dcb3127786 ("net: stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yan Wang <rk.code@outlook.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Anderson <seanga2@gmail.com>
Date: Fri Mar 24 13:51:27 2023 -0400
net: sunhme: Fix uninitialized return code
[ Upstream commit d61157414d0a591d10d27d0ce5873916614e5e31 ]
Fix an uninitialized return code if we never found a qfe slot. It would be
a bug if we ever got into this situation, but it's good to return something
tracable.
Fixes: acb3f35f920b ("sunhme: forward the error code from pci_enable_device()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Date: Fri Mar 31 08:35:15 2023 +0200
net: wwan: t7xx: do not compile with -Werror
[ Upstream commit 362f0b6678ad1377c322a7dd237ea6785efc7342 ]
When playing with various compilers or their versions, some choke on
the t7xx code. For example (with gcc 13):
In file included from ./arch/s390/include/generated/asm/rwonce.h:1,
from ../include/linux/compiler.h:247,
from ../include/linux/build_bug.h:5,
from ../include/linux/bits.h:22,
from ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:17:
In function 'preempt_count',
inlined from 't7xx_fsm_append_event' at ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:439:43:
../include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'const volatile int[0]' [-Werror=array-bounds=]
There is no reason for any code in the kernel to be built with -Werror
by default. Note that we have generic CONFIG_WERROR. So if anyone wants
-Werror, they can enable that.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/20230330232717.1f8bf5ea@kernel.org/
Cc: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Cc: Intel Corporation <linuxwwan@intel.com>
Cc: Chiranjeevi Rapolu <chiranjeevi.rapolu@linux.intel.com>
Cc: Liu Haijun <haijun.liu@mediatek.com>
Cc: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Cc: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tzung-Bi Shih <tzungbi@kernel.org>
Date: Wed Apr 19 13:15:26 2023 +0800
netfilter: conntrack: fix wrong ct->timeout value
[ Upstream commit 73db1b8f2bb6725b7391e85aab41fdf592b3c0c1 ]
(struct nf_conn)->timeout is an interval before the conntrack
confirmed. After confirmed, it becomes a timestamp.
It is observed that timeout of an unconfirmed conntrack:
- Set by calling ctnetlink_change_timeout(). As a result,
`nfct_time_stamp` was wrongly added to `ct->timeout` twice.
- Get by calling ctnetlink_dump_timeout(). As a result,
`nfct_time_stamp` was wrongly subtracted.
Call Trace:
<TASK>
dump_stack_lvl
ctnetlink_dump_timeout
__ctnetlink_glue_build
ctnetlink_glue_build
__nfqnl_enqueue_packet
nf_queue
nf_hook_slow
ip_mc_output
? __pfx_ip_finish_output
ip_send_skb
? __pfx_dst_output
udp_send_skb
udp_sendmsg
? __pfx_ip_generic_getfrag
sock_sendmsg
Separate the 2 cases in:
- Setting `ct->timeout` in __nf_ct_set_timeout().
- Getting `ct->timeout` in ctnetlink_dump_timeout().
Pablo appends:
Update ctnetlink to set up the timeout _after_ the IPS_CONFIRMED flag is
set on, otherwise conntrack creation via ctnetlink breaks.
Note that the problem described in this patch occurs since the
introduction of the nfnetlink_queue conntrack support, select a
sufficiently old Fixes: tag for -stable kernel to pick up this fix.
Fixes: a4b4766c3ceb ("netfilter: nfnetlink_queue: rename related to nfqueue attaching conntrack info")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Tue Apr 18 23:31:26 2023 +0200
netfilter: conntrack: restore IPS_CONFIRMED out of nf_conntrack_hash_check_insert()
[ Upstream commit 2cdaa3eefed83082923cf219c8b6a314e622da74 ]
e6d57e9ff0ae ("netfilter: conntrack: fix rmmod double-free race")
consolidates IPS_CONFIRMED bit set in nf_conntrack_hash_check_insert().
However, this breaks ctnetlink:
# conntrack -I -p tcp --timeout 123 --src 1.2.3.4 --dst 5.6.7.8 --state ESTABLISHED --sport 1 --dport 4 -u SEEN_REPLY
conntrack v1.4.6 (conntrack-tools): Operation failed: Device or resource busy
This is a partial revert of the aforementioned commit to restore
IPS_CONFIRMED.
Fixes: e6d57e9ff0ae ("netfilter: conntrack: fix rmmod double-free race")
Reported-by: Stéphane Graber <stgraber@stgraber.org>
Tested-by: Stéphane Graber <stgraber@stgraber.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Madhu Koriginja <madhu.koriginja@nxp.com>
Date: Tue Mar 21 21:28:44 2023 +0530
netfilter: keep conntrack reference until IPsecv6 policy checks are done
[ Upstream commit b0e214d212030fe497d4d150bb3474e50ad5d093 ]
Keep the conntrack reference until policy checks have been performed for
IPsec V6 NAT support, just like ipv4.
The reference needs to be dropped before a packet is
queued to avoid having the conntrack module unloadable.
Fixes: 58a317f1061c ("netfilter: ipv6: add IPv6 NAT support")
Signed-off-by: Madhu Koriginja <madhu.koriginja@nxp.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Tue May 2 10:25:24 2023 +0200
netfilter: nf_tables: deactivate anonymous set from preparation phase
commit c1592a89942e9678f7d9c8030efa777c0d57edab upstream.
Toggle deleted anonymous sets as inactive in the next generation, so
users cannot perform any update on it. Clear the generation bitmask
in case the transaction is aborted.
The following KASAN splat shows a set element deletion for a bound
anonymous set that has been already removed in the same transaction.
[ 64.921510] ==================================================================
[ 64.923123] BUG: KASAN: wild-memory-access in nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.924745] Write of size 8 at addr dead000000000122 by task test/890
[ 64.927903] CPU: 3 PID: 890 Comm: test Not tainted 6.3.0+ #253
[ 64.931120] Call Trace:
[ 64.932699] <TASK>
[ 64.934292] dump_stack_lvl+0x33/0x50
[ 64.935908] ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.937551] kasan_report+0xda/0x120
[ 64.939186] ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.940814] nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.942452] ? __kasan_slab_alloc+0x2d/0x60
[ 64.944070] ? nf_tables_setelem_notify+0x190/0x190 [nf_tables]
[ 64.945710] ? kasan_set_track+0x21/0x30
[ 64.947323] nfnetlink_rcv_batch+0x709/0xd90 [nfnetlink]
[ 64.948898] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Florian Westphal <fw@strlen.de>
Date: Thu Apr 13 17:13:19 2023 +0200
netfilter: nf_tables: don't write table validation state without mutex
[ Upstream commit 9a32e9850686599ed194ccdceb6cd3dd56b2d9b9 ]
The ->cleanup callback needs to be removed, this doesn't work anymore as
the transaction mutex is already released in the ->abort function.
Just do it after a successful validation pass, this either happens
from commit or abort phases where transaction mutex is held.
Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuniyuki Iwashima <kuniyu@amazon.com>
Date: Fri Apr 21 11:52:55 2023 -0700
netlink: Use copy_to_user() for optval in netlink_getsockopt().
[ Upstream commit d913d32cc2707e9cd24fe6fa6d7d470e9c728980 ]
Brad Spencer provided a detailed report [0] that when calling getsockopt()
for AF_NETLINK, some SOL_NETLINK options set only 1 byte even though such
options require at least sizeof(int) as length.
The options return a flag value that fits into 1 byte, but such behaviour
confuses users who do not initialise the variable before calling
getsockopt() and do not strictly check the returned value as char.
Currently, netlink_getsockopt() uses put_user() to copy data to optlen and
optval, but put_user() casts the data based on the pointer, char *optval.
As a result, only 1 byte is set to optval.
To avoid this behaviour, we need to use copy_to_user() or cast optval for
put_user().
Note that this changes the behaviour on big-endian systems, but we document
that the size of optval is int in the man page.
$ man 7 netlink
...
Socket options
To set or get a netlink socket option, call getsockopt(2) to read
or setsockopt(2) to write the option with the option level argument
set to SOL_NETLINK. Unless otherwise noted, optval is a pointer to
an int.
Fixes: 9a4595bc7e67 ("[NETLINK]: Add set/getsockopt options to support more than 32 groups")
Fixes: be0c22a46cfb ("netlink: add NETLINK_BROADCAST_ERROR socket option")
Fixes: 38938bfe3489 ("netlink: add NETLINK_NO_ENOBUFS socket flag")
Fixes: 0a6a3a23ea6e ("netlink: add NETLINK_CAP_ACK socket option")
Fixes: 2d4bc93368f5 ("netlink: extended ACK reporting")
Fixes: 89d35528d17d ("netlink: Add new socket option to enable strict checking on dumps")
Reported-by: Brad Spencer <bspencer@blackberry.com>
Link: https://lore.kernel.org/netdev/ZD7VkNWFfp22kTDt@datsun.rim.net/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://lore.kernel.org/r/20230421185255.94606-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Huanhuan Wang <huanhuan.wang@corigine.com>
Date: Thu Apr 20 16:01:25 2023 +0200
nfp: fix incorrect pointer deference when offloading IPsec with bonding
commit 63cfd210034c772fad047afa13dd5a4664b0a72e upstream.
There are two pointers in struct xfrm_dev_offload, *dev, *real_dev.
The *dev points whether bonding interface or real interface, if
bonding IPsec offload is used, it points bonding interface; if not,
it points real interface. And *real_dev always points real interface.
So nfp should always use real_dev instead of dev.
Prior to this change the system becomes unresponsive when offloading
IPsec for a device which is a lower device to a bonding device.
Fixes: 859a497fe80c ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer")
CC: stable@vger.kernel.org
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20230420140125.38521-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Trond Myklebust <trond.myklebust@hammerspace.com>
Date: Mon Mar 13 18:45:53 2023 -0400
NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease
[ Upstream commit 40882deb83c29d8df4470d4e5e7f137b6acf7ad1 ]
The spec requires that we always at least send a RECLAIM_COMPLETE when
we're done establishing the lease and recovering any state.
Fixes: fce5c838e133 ("nfs41: RECLAIM_COMPLETE functionality")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Date: Thu Apr 27 10:15:26 2023 +0900
nilfs2: do not write dirty data after degenerating to read-only
commit 28a65b49eb53e172d23567005465019658bfdb4d upstream.
According to syzbot's report, mark_buffer_dirty() called from
nilfs_segctor_do_construct() outputs a warning with some patterns after
nilfs2 detects metadata corruption and degrades to read-only mode.
After such read-only degeneration, page cache data may be cleared through
nilfs_clear_dirty_page() which may also clear the uptodate flag for their
buffer heads. However, even after the degeneration, log writes are still
performed by unmount processing etc., which causes mark_buffer_dirty() to
be called for buffer heads without the "uptodate" flag and causes the
warning.
Since any writes should not be done to a read-only file system in the
first place, this fixes the warning in mark_buffer_dirty() by letting
nilfs_segctor_do_construct() abort early if in read-only mode.
This also changes the retry check of nilfs_segctor_write_out() to avoid
unnecessary log write retries if it detects -EROFS that
nilfs_segctor_do_construct() returned.
Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Date: Mon May 1 04:30:46 2023 +0900
nilfs2: fix infinite loop in nilfs_mdt_get_block()
commit a6a491c048882e7e424d407d32cba0b52d9ef2bf upstream.
If the disk image that nilfs2 mounts is corrupted and a virtual block
address obtained by block lookup for a metadata file is invalid,
nilfs_bmap_lookup_at_level() may return the same internal return code as
-ENOENT, meaning the block does not exist in the metadata file.
This duplication of return codes confuses nilfs_mdt_get_block(), causing
it to read and create a metadata block indefinitely.
In particular, if this happens to the inode metadata file, ifile,
semaphore i_rwsem can be left held, causing task hangs in lock_mount.
Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block
address translation failures with -ENOENT as metadata corruption instead
of returning the error code.
Link: https://lkml.kernel.org/r/20230430193046.6769-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+221d75710bde87fa0e97@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=221d75710bde87fa0e97
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ming Lei <ming.lei@redhat.com>
Date: Wed Apr 12 16:49:04 2023 +0800
nvme-fcloop: fix "inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage"
[ Upstream commit 4f86a6ff6fbd891232dda3ca97fd1b9630b59809 ]
fcloop_fcp_op() could be called from flush request's ->end_io(flush_end_io) in
which the spinlock of fq->mq_flush_lock is grabbed with irq saved/disabled.
So fcloop_fcp_op() can't call spin_unlock_irq(&tfcp_req->reqlock) simply
which enables irq unconditionally.
Fixes the warning by switching to spin_lock_irqsave()/spin_unlock_irqrestore()
Fixes: c38dbbfab1bc ("nvme-fcloop: fix inconsistent lock state warnings")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Keith Busch <kbusch@kernel.org>
Date: Wed Apr 5 14:57:20 2023 -0700
nvme: fix async event trace event
[ Upstream commit 6622b76fe922b94189499a90ccdb714a4a8d0773 ]
Mixing AER Event Type and Event Info has masking clashes. Just print the
event type, but also include the event info of the AER result in the
trace.
Fixes: 09bd1ff4b15143b ("nvme-core: add async event trace helper")
Reported-by: Nate Thornton <nate.thornton@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Date: Tue Mar 14 15:20:36 2023 +0900
nvmet: fix error handling in nvmet_execute_identify_cns_cs_ns()
[ Upstream commit ab76e7206b672b2e8818cb121a04506956d6b223 ]
Nvme specifications state that:
If the I/O Command Set associated with the namespace identified by the
NSID field does not support the Identify Namespace data structure
specified by the CSI field, the controller shall abort the command with
a status code of Invalid Field in Command.
In other words, if nvmet_execute_identify_cns_cs_ns() is called for a
target with a block device that is not zoned, we should not return any
data and set the status to NVME_SC_INVALID_FIELD.
While at it, it is also better to revalidate the ns block devie *before*
checking if the block device is zoned, to ensure that
nvmet_execute_identify_cns_cs_ns() operates against updated device
characteristics.
Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Date: Wed Mar 15 19:59:38 2023 +0900
nvmet: fix I/O Command Set specific Identify Controller
[ Upstream commit a5a6ab0950b46ab1ef4a5c83c80234018b81b38a ]
For an identify command with cns set to NVME_ID_CNS_CS_CTRL, the NVMe
2.0 specification states that:
If the I/O Command Set specified by the CSI field does not have an
Identify Controller data structure, then the controller shall return
a zero filled data structure. If the host requests a data structure for
an I/O Command Set that the controller does not support, the controller
shall abort the command with a status code of Invalid Field in Command.
However, the current implementation of this identify command in
nvmet_execute_identify() only handles the ZNS command set, returning an
error for the NVM command set, which is not compliant with the
specifications as we do support this command set.
Fix this by:
1) Renaming nvmet_execute_identify_cns_cs_ctrl() to
nvmet_execute_identify_ctrl_zns() to continue handling the
ZNS command set as is.
2) Introduce a nvmet_execute_identify_ctrl_ns() helper to handle the
NVM command set, returning a zero filled nvme_id_ctrl_nvm data
structure.
3) Modify nvmet_execute_identify() to call these helpers based on
the csi specified, returning an error for unsupported command sets.
Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Date: Wed Mar 15 19:59:37 2023 +0900
nvmet: fix Identify Active Namespace ID list handling
[ Upstream commit 97416f67d55fb8b866ff1815ca7ef26b6dfa6a5e ]
The identify command with cns set to NVME_ID_CNS_NS_ACTIVE_LIST does
not depend on the command set. The execution of this command should
thus not look at the csi field specified in the command. Simplify
nvmet_execute_identify() to directly call
nvmet_execute_identify_nslist() without the csi switch-case.
Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Date: Wed Mar 15 19:59:36 2023 +0900
nvmet: fix Identify Controller handling
[ Upstream commit 62904b3b333e7f3c0f879dc3513295eee5765c9f ]
The identify command with cns set to NVME_ID_CNS_CTRL does not depend on
the command set. The execution of this command should thus not look at
the csi specified in the command. Simplify nvmet_execute_identify() to
directly call nvmet_execute_identify_ctrl() without the csi switch-case.
Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Date: Wed Mar 15 19:59:35 2023 +0900
nvmet: fix Identify Namespace handling
[ Upstream commit 8c098aa00118c35108f0c19bd3cdc45e11574948 ]
The identify command with cns set to NVME_ID_CNS_NS does not directly
depend on the command set. The NVMe specifications is rather confusing
here as it appears that this command only applies to the NVM command
set. However, footnote 8 of Figure 273 in the NVMe 2.0 base
specifications clearly state that this command applies to NVM command
sets that support logical blocks, that is, NVM and ZNS. Both the NVM and
ZNS command set specifications also list this identify as mandatory.
The command handling should thus not look at the csi field since it is
defined as unused for this command. Given that we do not support the
KV command set, simply remove the csi switch-case for that command
handling and call directly nvmet_execute_identify_ns() in
nvmet_execute_identify().
Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Tue Apr 4 18:21:09 2023 +0100
of: Fix modalias string generation
[ Upstream commit b19a4266c52de78496fe40f0b37580a3b762e67d ]
The helper generating an OF based modalias (of_device_get_modalias())
works fine, but due to the use of snprintf() internally it needs a
buffer one byte longer than what should be needed just for the entire
string (excluding the '\0'). Most users of this helper are sysfs hooks
providing the modalias string to users. They all provide a PAGE_SIZE
buffer which is way above the number of bytes required to fit the
modalias string and hence do not suffer from this issue.
There is another user though, of_device_request_module(), which is only
called by drivers/usb/common/ulpi.c. This request module function is
faulty, but maybe because in most cases there is an alternative, ULPI
driver users have not noticed it.
In this function, of_device_get_modalias() is called twice. The first
time without buffer just to get the number of bytes required by the
modalias string (excluding the null byte), and a second time, after
buffer allocation, to fill the buffer. The allocation asks for an
additional byte, in order to store the trailing '\0'. However, the
buffer *length* provided to of_device_get_modalias() excludes this extra
byte. The internal use of snprintf() with a length that is exactly the
number of bytes to be written has the effect of using the last available
byte to store a '\0', which then smashes the last character of the
modalias string.
Provide the actual size of the buffer to of_device_get_modalias() to fix
this issue.
Note: the "str[size - 1] = '\0';" line is not really needed as snprintf
will anyway end the string with a null byte, but there is a possibility
that this function might be called on a struct device_node without
compatible, in this case snprintf() would not be executed. So we keep it
just to avoid possible unbounded strings.
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Peter Chen <peter.chen@kernel.org>
Fixes: 9c829c097f2f ("of: device: Support loading a module with OF based modalias")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stafford Horne <shorne@gmail.com>
Date: Sat Feb 11 19:14:06 2023 +0900
openrisc: Properly store r31 to pt_regs on unhandled exceptions
[ Upstream commit 812489ac4dd91144a74ce65ecf232252a2e406fb ]
In commit 91993c8c2ed5 ("openrisc: use shadow registers to save regs on
exception") the unhandled exception path was changed to do an early
store of r30 instead of r31. The entry code was not updated and r31 is
not getting stored to pt_regs.
This patch updates the entry handler to store r31 instead of r30. We
also remove some misleading commented out store r30 and r31
instructrions.
I noticed this while working on adding floating point exception
handling, This issue probably would never impact anything since we kill
the process or Oops right away on unhandled exceptions.
Fixes: 91993c8c2ed5 ("openrisc: use shadow registers to save regs on exception")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Helge Deller <deller@gmx.de>
Date: Wed Mar 15 19:25:15 2023 +0100
parisc: Ensure page alignment in flush functions
commit d755bd2caeb47fd806e12399fe8b56798fa5d2cc upstream.
Matthew Wilcox noticed, that if ARCH_HAS_FLUSH_ON_KUNMAP is defined
(which is the case for PA-RISC), __kunmap_local() calls
kunmap_flush_on_unmap(), which may call the parisc flush functions with
a non-page-aligned address and thus the page might not be fully flushed.
This patch ensures that flush_kernel_dcache_page_asm() and
flush_kernel_dcache_page_asm() will always operate on page-aligned
addresses.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Helge Deller <deller@gmx.de>
Date: Wed May 3 16:39:56 2023 +0200
parisc: Fix argument pointer in real64_call_asm()
commit 6e3220ba3323a2c24be834aebf5d6e9f89d0993f upstream.
Fix the argument pointer (ap) to point to real-mode memory
instead of virtual memory.
It's interesting that this issue hasn't shown up earlier, as this could
have happened with any 64-bit PDC ROM code.
I just noticed it because I suddenly faced a HPMC while trying to execute
the 64-bit STI ROM code of an Visualize-FXe graphics card for the STI
text console.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Date: Wed Mar 15 16:54:49 2023 -0700
PCI/EDR: Clear Device Status after EDR error recovery
[ Upstream commit c441b1e03da6c680a3e12da59c554f454f2ccf5e ]
During EDR recovery, the OS must clear error status of the port that
triggered DPC even if firmware retains control of DPC and AER (see the
implementation note in the PCI Firmware spec r3.3, sec 4.6.12).
Prior to 068c29a248b6 ("PCI/ERR: Clear PCIe Device Status errors only if
OS owns AER"), the port Device Status was cleared in this path:
edr_handle_event
dpc_process_error(dev) # "dev" triggered DPC
pcie_do_recovery(dev, dpc_reset_link)
dpc_reset_link # exit DPC
pcie_clear_device_status(dev) # clear Device Status
After 068c29a248b6, pcie_do_recovery() no longer clears Device Status when
firmware controls AER, so the error bit remains set even after recovery.
Per the "Downstream Port Containment configuration control" bit in the
returned _OSC Control Field (sec 4.5.1), the OS is allowed to clear error
status until it evaluates _OST, so clear Device Status in
edr_handle_event() if the error recovery was successful.
[bhelgaas: commit log]
Fixes: 068c29a248b6 ("PCI/ERR: Clear PCIe Device Status errors only if OS owns AER")
Link: https://lore.kernel.org/r/20230315235449.1279209-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reported-by: Tsaur Erwin <erwin.tsaur@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alex Williamson <alex.williamson@redhat.com>
Date: Thu Apr 13 13:40:42 2023 -0600
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
[ Upstream commit a5a6dd2624698b6e3045c3a1450874d8c790d5d9 ]
Assignment of NVIDIA Ampere-based GPUs have seen a regression since the
below referenced commit, where the reduced D3hot transition delay appears
to introduce a small window where a D3hot->D0 transition followed by a bus
reset can wedge the device. The entire device is subsequently unavailable,
returning -1 on config space read and is unrecoverable without a host
reset.
This has been observed with RTX A2000 and A5000 GPU and audio functions
assigned to a Windows VM, where shutdown of the VM places the devices in
D3hot prior to vfio-pci performing a bus reset when userspace releases the
devices. The issue has roughly a 2-3% chance of occurring per shutdown.
Restoring the HDA controller d3hot_delay to the effective value before the
below commit has been shown to resolve the issue. NVIDIA confirms this
change should be safe for all of their HDA controllers.
Fixes: 3e347969a577 ("PCI/PM: Reduce D3hot delay with usleep_range()")
Link: https://lore.kernel.org/r/20230413194042.605768-1-alex.williamson@redhat.com
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tarun Gupta <targupta@nvidia.com>
Cc: Abhishek Sahu <abhsahu@nvidia.com>
Cc: Tarun Gupta <targupta@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: H. Nikolaus Schaller <hns@goldelico.com>
Date: Thu Mar 9 17:56:31 2023 +0100
PCI: imx6: Install the fault handler only on compatible match
[ Upstream commit 5f5ac460dfe7f4e11f99de9870f240e39189cf72 ]
commit bb38919ec56e ("PCI: imx6: Add support for i.MX6 PCIe controller")
added a fault hook to this driver in the probe function. So it was only
installed if needed.
commit bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO")
moved it from probe to driver init which installs the hook unconditionally
as soon as the driver is compiled into a kernel.
When this driver is compiled as a module, the hook is not registered
until after the driver has been matched with a .compatible and
loaded.
commit 415b6185c541 ("PCI: imx6: Fix config read timeout handling")
extended the fault handling code.
commit 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ")
added some protection for non-ARM architectures, but this does not
protect non-i.MX ARM architectures.
Since fault handlers can be triggered on any architecture for different
reasons, there is no guarantee that they will be triggered only for the
assumed situation, leading to improper error handling (i.MX6-specific
imx6q_pcie_abort_handler) on foreign systems.
I had seen strange L3 imprecise external abort messages several times on
OMAP4 and OMAP5 devices and couldn't make sense of them until I realized
they were related to this unused imx6q driver because I had
CONFIG_PCI_IMX6=y.
Note that CONFIG_PCI_IMX6=y is useful for kernel binaries that are designed
to run on different ARM SoC and be differentiated only by device tree
binaries. So turning off CONFIG_PCI_IMX6 is not a solution.
Therefore we check the compatible in the init function before registering
the fault handler.
Link: https://lore.kernel.org/r/e1bcfc3078c82b53aa9b78077a89955abe4ea009.1678380991.git.hns@goldelico.com
Fixes: bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO")
Fixes: 415b6185c541 ("PCI: imx6: Fix config read timeout handling")
Fixes: 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Josh Triplett <josh@joshtriplett.org>
Date: Sun Nov 13 23:23:26 2022 -0800
PCI: kirin: Select REGMAP_MMIO
commit 3a2776e8a0e156a61f5b59ae341d8fffc730b962 upstream.
pcie-kirin uses regmaps, and needs to pull them in; otherwise, with
CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces
a linker failure looking for __devm_regmap_init_mmio_clk().
Fixes: d19afe7be126 ("PCI: kirin: Use regmap for APB registers")
Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
[lpieralisi@kernel.org: commit log and removed REGMAP select]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lukas Wunner <lukas@wunner.de>
Date: Tue Apr 11 08:21:02 2023 +0200
PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock
commit f5eff5591b8f9c5effd25c92c758a127765f74c1 upstream.
In 2013, commits
2e35afaefe64 ("PCI: pciehp: Add reset_slot() method")
608c388122c7 ("PCI: Add slot reset option to pci_dev_reset()")
amended PCIe hotplug to mask Presence Detect Changed events during a
Secondary Bus Reset. The reset thus no longer causes gratuitous slot
bringdown and bringup.
However the commits neglected to serialize reset with code paths reading
slot registers. For instance, a slot bringup due to an earlier hotplug
event may see the Presence Detect State bit cleared during a concurrent
Secondary Bus Reset.
In 2018, commit
5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset")
retrofitted the missing locking. It introduced a reset_lock which
serializes a Secondary Bus Reset with other parts of pciehp.
Unfortunately the locking turns out to be overzealous: reset_lock is
held for the entire enumeration and de-enumeration of hotplugged devices,
including driver binding and unbinding.
Driver binding and unbinding acquires device_lock while the reset_lock
of the ancestral hotplug port is held. A concurrent Secondary Bus Reset
acquires the ancestral reset_lock while already holding the device_lock.
The asymmetric locking order in the two code paths can lead to AB-BA
deadlocks.
Michael Haeuptle reports such deadlocks on simultaneous hot-removal and
vfio release (the latter implies a Secondary Bus Reset):
pciehp_ist() # down_read(reset_lock)
pciehp_handle_presence_or_link_change()
pciehp_disable_slot()
__pciehp_disable_slot()
remove_board()
pciehp_unconfigure_device()
pci_stop_and_remove_bus_device()
pci_stop_bus_device()
pci_stop_dev()
device_release_driver()
device_release_driver_internal()
__device_driver_lock() # device_lock()
SYS_munmap()
vfio_device_fops_release()
vfio_device_group_close()
vfio_device_close()
vfio_device_last_close()
vfio_pci_core_close_device()
vfio_pci_core_disable() # device_lock()
__pci_reset_function_locked()
pci_reset_bus_function()
pci_dev_reset_slot_function()
pci_reset_hotplug_slot()
pciehp_reset_slot() # down_write(reset_lock)
Ian May reports the same deadlock on simultaneous hot-removal and an
AER-induced Secondary Bus Reset:
aer_recover_work_func()
pcie_do_recovery()
aer_root_reset()
pci_bus_error_reset()
pci_slot_reset()
pci_slot_lock() # device_lock()
pci_reset_hotplug_slot()
pciehp_reset_slot() # down_write(reset_lock)
Fix by releasing the reset_lock during driver binding and unbinding,
thereby splitting and shrinking the critical section.
Driver binding and unbinding is protected by the device_lock() and thus
serialized with a Secondary Bus Reset. There's no need to additionally
protect it with the reset_lock. However, pciehp does not bind and
unbind devices directly, but rather invokes PCI core functions which
also perform certain enumeration and de-enumeration steps.
The reset_lock's purpose is to protect slot registers, not enumeration
and de-enumeration of hotplugged devices. That would arguably be the
job of the PCI core, not the PCIe hotplug driver. After all, an
AER-induced Secondary Bus Reset may as well happen during boot-time
enumeration of the PCI hierarchy and there's no locking to prevent that
either.
Exempting *de-enumeration* from the reset_lock is relatively harmless:
A concurrent Secondary Bus Reset may foil config space accesses such as
PME interrupt disablement. But if the device is physically gone, those
accesses are pointless anyway. If the device is physically present and
only logically removed through an Attention Button press or the sysfs
"power" attribute, PME interrupts as well as DMA cannot come through
because pciehp_unconfigure_device() disables INTx and Bus Master bits.
That's still protected by the reset_lock in the present commit.
Exempting *enumeration* from the reset_lock also has limited impact:
The exempted call to pci_bus_add_device() may perform device accesses
through pcibios_bus_add_device() and pci_fixup_device() which are now
no longer protected from a concurrent Secondary Bus Reset. Otherwise
there should be no impact.
In essence, the present commit seeks to fix the AB-BA deadlocks while
still retaining a best-effort reset protection for enumeration and
de-enumeration of hotplugged devices -- until a general solution is
implemented in the PCI core.
Link: https://lore.kernel.org/linux-pci/CS1PR8401MB0728FC6FDAB8A35C22BD90EC95F10@CS1PR8401MB0728.NAMPRD84.PROD.OUTLOOK.COM
Link: https://lore.kernel.org/linux-pci/20200615143250.438252-1-ian.may@canonical.com
Link: https://lore.kernel.org/linux-pci/ce878dab-c0c4-5bd0-a725-9805a075682d@amd.com
Link: https://lore.kernel.org/linux-pci/ed831249-384a-6d35-0831-70af191e9bce@huawei.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes: 5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset")
Link: https://lore.kernel.org/r/fef2b2e9edf245c049a8c5b94743c0f74ff5008a.1681191902.git.lukas@wunner.de
Reported-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reported-by: Ian May <ian.may@canonical.com>
Reported-by: Andrey Grodzovsky <andrey2805@gmail.com>
Reported-by: Rahul Kumar <rahul.kumar1@amd.com>
Reported-by: Jialin Zhang <zhangjialin11@huawei.com>
Tested-by: Anatoli Antonovitch <Anatoli.Antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.19+
Cc: Dan Stein <dstein@hpe.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Alex Michon <amichon@kalrayinc.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Manivannan Sadhasivam <mani@kernel.org>
Date: Thu Mar 16 13:40:59 2023 +0530
PCI: qcom: Fix the incorrect register usage in v2.7.0 config
commit 2542e16c392508800f1d9037feee881a9c444951 upstream.
Qcom PCIe IP version v2.7.0 and its derivatives don't contain the
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect
register usage which is modifying a different register.
Also in this IP version, this register change doesn't depend on MSI
being enabled. So remove that check also.
Link: https://lore.kernel.org/r/20230316081117.14288-2-manivannan.sadhasivam@linaro.org
Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: <stable@vger.kernel.org> # 5.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Adrian Hunter <adrian.hunter@intel.com>
Date: Mon Apr 3 18:48:30 2023 +0300
perf auxtrace: Fix address filter entire kernel size
commit 1f9f33ccf0320be21703d9195dd2b36a1c9a07cb upstream.
kallsyms is not completely in address order.
In find_entire_kern_cb(), calculate the kernel end from the maximum
address not the last symbol.
Example:
Before:
$ sudo cat /proc/kallsyms | grep ' [twTw] ' | tail -1
ffffffffc00b8bd0 t bpf_prog_6deef7357e7b4530 [bpf]
$ sudo cat /proc/kallsyms | grep ' [twTw] ' | sort | tail -1
ffffffffc15e0cc0 t iwl_mvm_exit [iwlmvm]
$ perf.d093603a05aa record -v --kcore -e intel_pt// --filter 'filter *' -- uname |& grep filter
Address filter: filter 0xffffffff93200000/0x2ceba000
After:
$ perf.8fb0f7a01f8e record -v --kcore -e intel_pt// --filter 'filter *' -- uname |& grep filter
Address filter: filter 0xffffffff93200000/0x2e3e2000
Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230403154831.8651-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Adrian Hunter <adrian.hunter@intel.com>
Date: Mon Apr 3 18:48:31 2023 +0300
perf intel-pt: Fix CYC timestamps after standalone CBR
commit 430635a0ef1ce958b7b4311f172694ece2c692b8 upstream.
After a standalone CBR (not associated with TSC), update the cycles
reference timestamp and reset the cycle count, so that CYC timestamps
are calculated relative to that point with the new frequency.
Fixes: cc33618619cefc6d ("perf tools: Add Intel PT support for decoding CYC packets")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230403154831.8651-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiucheng Xu <jiucheng.xu@amlogic.com>
Date: Thu Feb 9 19:54:01 2023 +0800
perf/amlogic: Fix config1/config2 parsing issue
[ Upstream commit c61e5720f23273269cc67ffb2908cf9831c8ca9d ]
The 3th argument of for_each_set_bit is incorrect, fix them.
Fixes: 2016e2113d35 ("perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver")
Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
Link: https://lore.kernel.org/r/20230209115403.521868-1-jiucheng.xu@amlogic.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Robin Murphy <robin.murphy@arm.com>
Date: Wed Apr 12 11:29:40 2023 +0100
perf/arm-cmn: Fix port detection for CMN-700
[ Upstream commit 2ad91e44e6b0c7ef1ed151b3bb2242a2144e6085 ]
When the "extra device ports" configuration was first added, the
additional mxp_device_port_connect_info registers were added around the
existing mxp_mesh_port_connect_info registers. What I missed about
CMN-700 is that it shuffled them around to remove this discontinuity.
As such, tweak the definitions and factor out a helper for reading these
registers so we can deal with this discrepancy easily, which does at
least allow nicely tidying up the callsites. With this we can then also
do the nice thing and skip accesses completely rather than relying on
RES0 behaviour where we know the extra registers aren't defined.
Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Reported-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/71d129241d4d7923cde72a0e5b4c8d2f6084525f.1681295193.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Date: Wed Mar 1 09:55:40 2023 -0800
perf/arm-cmn: Move overlapping wp_combine field
[ Upstream commit f87e9114b5e590c2c6658ca21d7b714ca240bdd0 ]
As eventid field was expanded to support new mesh versions, it started to
overlap with wp_combine field. Move wp_combine to fix the issue.
Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230301175540.19891-1-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yang Jihong <yangjihong1@huawei.com>
Date: Mon Feb 27 10:35:08 2023 +0800
perf/core: Fix hardlockup failure caused by perf throttle
[ Upstream commit 15def34e2635ab7e0e96f1bc32e1b69609f14942 ]
commit e050e3f0a71bf ("perf: Fix broken interrupt rate throttling")
introduces a change in throttling threshold judgment. Before this,
compare hwc->interrupts and max_samples_per_tick, then increase
hwc->interrupts by 1, but this commit reverses order of these two
behaviors, causing the semantics of max_samples_per_tick to change.
In literal sense of "max_samples_per_tick", if hwc->interrupts ==
max_samples_per_tick, it should not be throttled, therefore, the judgment
condition should be changed to "hwc->interrupts > max_samples_per_tick".
In fact, this may cause the hardlockup to fail, The minimum value of
max_samples_per_tick may be 1, in this case, the return value of
__perf_event_account_interrupt function is 1.
As a result, nmi_watchdog gets throttled, which would stop PMU (Use x86
architecture as an example, see x86_pmu_handle_irq).
Fixes: e050e3f0a71b ("perf: Fix broken interrupt rate throttling")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230227023508.102230-1-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Fri Mar 31 18:12:49 2023 +0300
phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes
commit 1db6b0a4246ce708b89f5136571130b9987741d1 upstream.
All PCIe PHYs on sc8180x platform have 2 lanes, so change the number of
lanes to 2.
Fixes: f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support")
Cc: stable@vger.kernel.org # 5.15
Sgned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230331151250.4049-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Gaosheng Cui <cuigaosheng1@huawei.com>
Date: Tue Nov 29 19:16:34 2022 +0800
phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port
[ Upstream commit e024854048e733391b31fe5a398704b31b9af803 ]
The tegra_xusb_port_unregister should be called when usb2_port
and ulpi_port map fails in tegra_xusb_add_usb2_port() or in
tegra_xusb_add_ulpi_port(), fix it.
Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221129111634.1547747-1-cuigaosheng1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Siddharth Vadapalli <s-vadapalli@ti.com>
Date: Mon Apr 3 15:15:52 2023 +0530
phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select()
[ Upstream commit 57c0e1362fdd57d0cea7ab1e583b58abf4bd8c2d ]
In the wiz_mode_select() function, the configuration performed for
PHY_TYPE_USXGMII is unreachable. Fix it.
Fixes: b64a85fb8f53 ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230403094552.929108-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Date: Thu Apr 20 14:47:05 2023 +0200
pinctrl-bcm2835.c: fix race condition when setting gpio dir
[ Upstream commit b7badd752de05312fdb1aeb388480f706d0c087f ]
In the past setting the pin direction called pinctrl_gpio_direction()
which uses a mutex to serialize this. That was changed to set the
direction directly in the pin controller driver, but that lost the
serialization mechanism. Since the direction of multiple pins are in
the same register you can have a race condition, something that was
in fact observed with the cec-gpio driver.
Add a new spinlock to serialize writing to the FSEL registers.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 1a4541b68e25 ("pinctrl-bcm2835: don't call pinctrl_gpio_direction()")
Link: https://lore.kernel.org/r/4302b66b-ca20-0f19-d2aa-ee8661118863@xs4all.nl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Thu Mar 9 16:49:46 2023 +0100
pinctrl: qcom: lpass-lpi: set output value before enabling output
commit 163bfb0cb1f6fbf961cf912cbde57399ea1ae0e8 upstream.
As per Hardware Programming Guide, when configuring pin as output,
set the pin value before setting output-enable (OE). Similar approach
is in main SoC TLMM pin controller.
Cc: <stable@vger.kernel.org>
Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Arınç ÜNAL <arinc.unal@arinc9.com>
Date: Sat Mar 18 00:29:51 2023 +0300
pinctrl: ralink: reintroduce ralink,rt2880-pinmux compatible string
[ Upstream commit 7c19147d9cfc0f9328049d2e278279150d7de9ca ]
There have been stable releases with the ralink,rt2880-pinmux compatible
string included. Having it removed breaks the ABI. Reintroduce it.
Fixes: e5981cd46183 ("pinctrl: ralink: add new compatible strings for each pinctrl subdriver")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230317213011.13656-2-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hai Pham <hai.pham.ud@renesas.com>
Date: Fri Jan 27 14:10:31 2023 +0100
pinctrl: renesas: r8a779a0: Remove incorrect AVB[01] pinmux configuration
[ Upstream commit a145c9a8674ac8fbfa1595276e1b6cbfc5139038 ]
AVB[01]_{MAGIC,MDC,MDIO,TXCREFCLK} are registered as both
PINMUX_SINGLE(fn) and PINMUX_IPSR_GPSR(fn) in the pinmux_data array.
The latter are correct, hence remove the former.
Without this fix, the Ethernet PHY is not operational on the MDIO bus.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Fixes: 741a7370fc3b8b54 ("pinctrl: renesas: Initial R8A779A0 (V3U) PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6fd217b71e83ba9a8157513ed671a1fa218b23b6.1674824958.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Phong Hoang <phong.hoang.wz@renesas.com>
Date: Fri Jan 27 14:11:59 2023 +0100
pinctrl: renesas: r8a779f0: Fix tsn1_avtp_pps pin group
[ Upstream commit 60003351e99167d8cfa7c161e95856efc016f381 ]
Correct a typo mistake in the definition of the tsn1_avtp_pps pin group
mux.
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Fixes: babe298e9caaa3d7 ("pinctrl: renesas: r8a779f0: Add Ethernet pins, groups, and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/45ea6e87b91c36fd0b9706cf58ff50a4d1a99c44.1674825039.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Mon Nov 21 14:18:39 2022 +0100
pinctrl: renesas: r8a779g0: Fix ERROROUTC function names
[ Upstream commit 9da805344d2a2d27a32cc9271230055d8818e887 ]
According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, the
ERROROUTC signal is active-low. Hence add the missing "_N" suffix to
the pin function's names.
Resize column 2 of all IPxSR* definitions to accomodate the longer
names.
Fixes: b811062e5fd0343c ("pinctrl: renesas: r8a779g0: Add missing ERROROUTC_A")
Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1774303989e7d61f08fa81f1c2fa1b394505645f.1669036423.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Mon Nov 21 14:18:37 2022 +0100
pinctrl: renesas: r8a779g0: Fix Group 4/5 pin functions
[ Upstream commit 0a7a5226e7b177c68800985a19a80c1df9bceff6 ]
According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, pin
groups 4 and 5 do not use Module Select Registers to configure pin
functions, but use Peripheral Function Select Registers instead.
Hence:
- Remove the non-existent Module Select Registers (MODSEL[45]),
- Add the missing Peripheral Function Select Registers (IPxSR[45]),
- Correct the GPIO / Peripheral Function Select Register definitions
(GPSR]45_*),
- Correct the affected PINMUX definitions.
Fixes: 36611d28f5130d8b ("pinctrl: renesas: r8a779g0: Add missing MODSELx for AVBx")
Fixes: 36fb7b8af55b83e0 ("pinctrl: renesas: r8a779g0: Add missing MODSELx for TSN0")
Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3d3833d1738f5e8fcc4c1002aa93832464d129a0.1669036423.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Mon Nov 21 14:18:38 2022 +0100
pinctrl: renesas: r8a779g0: Fix Group 6/7 pin functions
[ Upstream commit 203734a0419cade9c76016f66e2c7ba354c249b4 ]
According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, pin
groups 6 and 7 do not use Module Select Registers to configure pin
functions.
Hence:
- Remove the non-existent Module Select Registers (MODSEL[67]),
- Correct the affected PINMUX definitions.
Fixes: 36611d28f5130d8b ("pinctrl: renesas: r8a779g0: Add missing MODSELx for AVBx")
Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/06972cafd0efa4cfb395cfa76000a1bdae5e9e73.1669036423.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liang He <windhl@126.com>
Date: Wed Mar 22 12:16:57 2023 +0800
platform/chrome: cros_typec_switch: Add missing fwnode_handle_put()
[ Upstream commit dc70234c408c644505a24362b0f095f713e4697e ]
In cros_typec_register_switches(), we should add fwnode_handle_put()
when break out of the iteration device_for_each_child_node()
as it will automatically increase and decrease the refcounter.
Fixes: affc804c44c8 ("platform/chrome: cros_typec_switch: Add switch driver")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20230322041657.1857001-1-windhl@126.com
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Date: Thu Apr 6 22:18:07 2023 +0530
platform/x86/amd/pmf: Move out of BIOS SMN pair for driver probe
[ Upstream commit aec8298c093f052fc8a86f9411b69b23953b0edb ]
The current SMN index used for the driver probe seems to be meant
for the BIOS pair and there are potential concurrency problems that can
occur with an inopportune SMI.
It is been advised to use SMN_INDEX_0 instead of SMN_INDEX_2, which is
what amd_nb.c provides and this function has protections to ensure that
only one caller can use it at a time.
Fixes: da5ce22df5fe ("platform/x86/amd/pmf: Add support for PMF core layer")
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230406164807.50969-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Mon Apr 10 00:23:43 2023 +0530
platform/x86/amd: pmc: Don't dump data after resume from s0i3 on picasso
[ Upstream commit 7abc3618b65304d409d9489d77e4a8f047842fb7 ]
This command isn't supported on Picasso, so guard against running it
to avoid errors like `SMU cmd unknown. err: 0xfe` in the logs.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2449
Fixes: 766205674962 ("platform/x86: amd-pmc: Add support for logging SMU metrics")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230409185348.556161-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Mon Apr 10 00:23:41 2023 +0530
platform/x86/amd: pmc: Don't try to read SMU version on Picasso
[ Upstream commit b845772677ea19b8e4c032bc07393ef32de4ee39 ]
Picasso doesn't support the command in the uPEP mailbox to try to
read the SMU version.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2449
Fixes: f6045de1f532 ("platform/x86: amd-pmc: Export Idlemask values based on the APU")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230409185348.556161-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Mon Apr 10 00:23:42 2023 +0530
platform/x86/amd: pmc: Hide SMU version and program attributes for Picasso
[ Upstream commit 5ec9ee0d464750d72972d5685edf675824e259a1 ]
As the command to get version isn't supported on Picasso, we shouldn't
be exposing this into sysfs either.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2449
Fixes: 7f1ea75d499a ("platform/x86/amd: pmc: Add sysfs files for SMU")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230409185348.556161-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Mon Apr 10 00:23:44 2023 +0530
platform/x86/amd: pmc: Move idlemask check into `amd_pmc_idlemask_read`
[ Upstream commit 9217bd1d7699f34a01b26ba14ff38c1714ce1185 ]
The version check requirement for idle mask support actually only
applies to RN/CZN/BRC platforms.
So far no issues have happened because the PMFW version string is
bigger on other supported systems. This can be reset for any new platform
so move the check to only RN/CZN/BRC case.
Fixes: f6045de1f532 ("platform/x86: amd-pmc: Export Idlemask values based on the APU")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230409185348.556161-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Date: Mon Apr 10 00:23:46 2023 +0530
platform/x86/amd: pmc: Move out of BIOS SMN pair for STB init
[ Upstream commit 8d99129eef8f42377b41c1bacee9f8ce806e9f44 ]
The current SMN index used for the driver probe seems to be meant
for the BIOS pair and there are potential concurrency problems that can
occur with an inopportune SMI.
It is been advised to use SMN_INDEX_0 instead of SMN_INDEX_6, which is
what amd_nb.c provides and this function has protections to ensure that
only one caller can use it at a time.
Fixes: 426c0ff27b83 ("platform/x86: amd-pmc: Add support for AMD Smart Trace Buffer")
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230409185348.556161-7-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Date: Mon Apr 10 00:23:45 2023 +0530
platform/x86/amd: pmc: Utilize SMN index 0 for driver probe
[ Upstream commit 310e782a99c7f16fb533a45d8f9c16defefa5aab ]
The current SMN index used for the driver probe seems to be meant
for the BIOS pair and there are potential concurrency problems that can
occur with an inopportune SMI.
It is been advised to use SMN_INDEX_0 instead of SMN_INDEX_2, which is
what amd_nb.c provides and this function has protections to ensure that
only one caller can use it at a time.
Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle")
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230409185348.556161-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Benjamin Asbach <asbachb.kernel@impl.it>
Date: Sat Apr 1 01:24:47 2023 +0200
platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle quirk list
[ Upstream commit 9a469c6dfab38326f99f105386db84230be09ee3 ]
From the commit message adding the first s2idle quirks:
> Lenovo laptops that contain NVME SSDs across a variety of generations have
> trouble resuming from suspend to idle when the IOMMU translation layer is
> active for the NVME storage device.
>
> This generally manifests as a large resume delay or page faults. These
> delays and page faults occur as a result of a Lenovo BIOS specific SMI
> that runs during the D3->D0 transition on NVME devices.
Add the DMI ids for another variant of the T14s Gen1, which also needs
the s2idle quirk.
Link: https://lore.kernel.org/all/20220503183420.348-1-mario.limonciello@amd.com/
Link: https://bbs.archlinux.org/viewtopic.php?pid=2084655#p2084655
Signed-off-by: Benjamin Asbach <asbachb.kernel@impl.it>
Tested-by: Benjamin Asbach <asbachb.kernel@impl.it>
Link: https://lore.kernel.org/r/20230331232447.37204-1-asbachb.kernel@impl.it
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Fri Dec 9 16:09:14 2022 +0100
platform: Provide a remove callback that returns no value
[ Upstream commit 5c5a7680e67ba6fbbb5f4d79fa41485450c1985c ]
struct platform_driver::remove returning an integer made driver authors
expect that returning an error code was proper error handling. However
the driver core ignores the error and continues to remove the device
because there is nothing the core could do anyhow and reentering the
remove callback again is only calling for trouble.
So this is an source for errors typically yielding resource leaks in the
error path.
As there are too many platform drivers to neatly convert them all to
return void in a single go, do it in several steps after this patch:
a) Convert all drivers to implement .remove_new() returning void instead
of .remove() returning int;
b) Change struct platform_driver::remove() to return void and so make
it identical to .remove_new();
c) Change all drivers back to .remove() now with the better prototype;
d) drop struct platform_driver::remove_new().
While this touches all drivers eventually twice, steps a) and c) can be
done one driver after another and so reduces coordination efforts
immensely and simplifies review.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221209150914.3557650-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: c766c90faf93 ("media: rcar_fdp1: Fix refcount leak in probe and remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen Yu <yu.c.chen@intel.com>
Date: Fri Apr 14 20:10:42 2023 +0800
PM: hibernate: Do not get block device exclusively in test_resume mode
[ Upstream commit 5904de0d735bbb3b4afe9375c5b4f9748f882945 ]
The system refused to do a test_resume because it found that the
swap device has already been taken by someone else. Specifically,
the swsusp_check()->blkdev_get_by_dev(FMODE_EXCL) is supposed to
do this check.
Steps to reproduce:
dd if=/dev/zero of=/swapfile bs=$(cat /proc/meminfo |
awk '/MemTotal/ {print $2}') count=1024 conv=notrunc
mkswap /swapfile
swapon /swapfile
swap-offset /swapfile
echo 34816 > /sys/power/resume_offset
echo test_resume > /sys/power/disk
echo disk > /sys/power/state
PM: Using 3 thread(s) for compression
PM: Compressing and saving image data (293150 pages)...
PM: Image saving progress: 0%
PM: Image saving progress: 10%
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
PM: Image saving progress: 20%
PM: Image saving progress: 30%
PM: Image saving progress: 40%
PM: Image saving progress: 50%
pcieport 0000:00:02.5: pciehp: Slot(0-5): No device found
PM: Image saving progress: 60%
PM: Image saving progress: 70%
PM: Image saving progress: 80%
PM: Image saving progress: 90%
PM: Image saving done
PM: hibernation: Wrote 1172600 kbytes in 2.70 seconds (434.29 MB/s)
PM: S|
PM: hibernation: Basic memory bitmaps freed
PM: Image not found (code -16)
This is because when using the swapfile as the hibernation storage,
the block device where the swapfile is located has already been mounted
by the OS distribution(usually mounted as the rootfs). This is not
an issue for normal hibernation, because software_resume()->swsusp_check()
happens before the block device(rootfs) mount. But it is a problem for the
test_resume mode. Because when test_resume happens, the block device has
been mounted already.
Thus remove the FMODE_EXCL for test_resume mode. This would not be a
problem because in test_resume stage, the processes have already been
frozen, and the race condition described in
Commit 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()")
is unlikely to happen.
Fixes: 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()")
Reported-by: Yifan Li <yifan2.li@intel.com>
Suggested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen Yu <yu.c.chen@intel.com>
Date: Fri Apr 14 20:10:26 2023 +0800
PM: hibernate: Turn snapshot_test into global variable
[ Upstream commit 08169a162f97819d3e5b4a342bb9cf5137787154 ]
There is need to check snapshot_test and open block device
in different mode, so as to avoid the race condition.
No functional changes intended.
Suggested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 5904de0d735b ("PM: hibernate: Do not get block device exclusively in test_resume mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Mon Apr 17 15:37:55 2023 +0200
posix-cpu-timers: Implement the missing timer_wait_running callback
commit f7abf14f0001a5a47539d9f60bbdca649e43536b upstream.
For some unknown reason the introduction of the timer_wait_running callback
missed to fixup posix CPU timers, which went unnoticed for almost four years.
Marco reported recently that the WARN_ON() in timer_wait_running()
triggers with a posix CPU timer test case.
Posix CPU timers have two execution models for expiring timers depending on
CONFIG_POSIX_CPU_TIMERS_TASK_WORK:
1) If not enabled, the expiry happens in hard interrupt context so
spin waiting on the remote CPU is reasonably time bound.
Implement an empty stub function for that case.
2) If enabled, the expiry happens in task work before returning to user
space or guest mode. The expired timers are marked as firing and moved
from the timer queue to a local list head with sighand lock held. Once
the timers are moved, sighand lock is dropped and the expiry happens in
fully preemptible context. That means the expiring task can be scheduled
out, migrated, interrupted etc. So spin waiting on it is more than
suboptimal.
The timer wheel has a timer_wait_running() mechanism for RT, which uses
a per CPU timer-base expiry lock which is held by the expiry code and the
task waiting for the timer function to complete blocks on that lock.
This does not work in the same way for posix CPU timers as there is no
timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry lock
can be used too in a slightly different way:
- Add a mutex to struct posix_cputimers_work. This struct is per task
and used to schedule the expiry task work from the timer interrupt.
- Add a task_struct pointer to struct cpu_timer which is used to store
a the task which runs the expiry. That's filled in when the task
moves the expired timers to the local expiry list. That's not
affecting the size of the k_itimer union as there are bigger union
members already
- Let the task take the expiry mutex around the expiry function
- Let the waiter acquire a task reference with rcu_read_lock() held and
block on the expiry mutex
This avoids spin-waiting on a task which might not even be on a CPU and
works nicely for RT too.
Fixes: ec8f954a40da ("posix-timers: Use a callback for cancel synchronization on PREEMPT_RT")
Reported-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg764ojw.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sebastian Reichel <sre@kernel.org>
Date: Fri Mar 17 23:56:57 2023 +0100
power: supply: generic-adc-battery: fix unit scaling
[ Upstream commit 44263f50065969f2344808388bd589740f026167 ]
power-supply properties are reported in µV, µA and µW.
The IIO API provides mV, mA, mW, so the values need to
be multiplied by 1000.
Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chris Morgan <macromorgan@hotmail.com>
Date: Fri Apr 7 11:18:27 2023 -0500
power: supply: rk817: Fix low SOC bugs
[ Upstream commit baba1315a74d12772d4940a05d58dc03e6ec0635 ]
When the SOC approaches zero, an integer overflows in the columb
counter causing the driver to react poorly. This makes the driver
think it's at (above) the fully charged capacity when in fact it's
zero. It would then write this full capacity to NVRAM which would be
used on boot if the device remained off for less than 5 hours and
not plugged in.
This can be fixed and guarded against by doing the following:
- Changing the type of tmp in rk817_read_or_set_full_charge_on_boot()
to be an int instead of a u32. That way we can account for negative
numbers.
- Guard against negative values for the full charge on boot by setting
the charge to 0 if the system charge reports less than 0.
- Catch scenarios where the battery voltage is below the design
minimum voltage and set the system SOC to 0 at that time and update
the columb counter with a charge level of 0.
- Change the off time value from 5 hours to 30 minutes before we
recalculate the current capacity based on the OCV tables.
These changes allow the driver to operate better at low voltage/low
capacity conditions.
Fixes: 3268a4d9b0b8 ("power: supply: rk817: Fix unsigned comparison with less than zero")
Fixes: 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nicholas Piggin <npiggin@gmail.com>
Date: Fri Apr 7 14:09:09 2023 +1000
powerpc/boot: Fix boot wrapper code generation with CONFIG_POWER10_CPU
commit 648a1783fe2551f5a091c9a5f8f463cb2cbf8745 upstream.
-mcpu=power10 will generate prefixed and pcrel code by default, which
we do not support. The general kernel disables these with cflags, but
those were missed for the boot wrapper.
Fixes: 4b2a9315f20d ("powerpc/64s: POWER10 CPU Kconfig build option")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230407040909.230998-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Wed Feb 22 23:01:13 2023 -0800
powerpc/mpc512x: fix resource printk format warning
[ Upstream commit 7538c97e2b80ff6b7a8ea2ecf16a04355461b439 ]
Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.
../arch/powerpc/platforms/512x/clock-commonclk.c: In function 'mpc5121_clk_provide_backwards_compat':
../arch/powerpc/platforms/512x/clock-commonclk.c:989:44: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
989 | snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \
| ^~~~~~~~~ ~~~~~~~~~
| |
| resource_size_t {aka long long unsigned int}
Prevents 24 such warnings.
Fixes: 01f25c371658 ("clk: mpc512x: add backwards compat to the CCF code")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe Leroy <christophe.leroy@csgroup.eu>
Date: Mon Feb 27 16:54:45 2023 +0100
powerpc/perf: Properly detect mpc7450 family
[ Upstream commit e7299f961fe5e4496db0bfaa9e819f5e97f3846b ]
Unlike PVR_POWER8, etc ...., PVR_7450 represents a full PVR
value and not a family value.
To avoid confusion, do like E500 family and define the relevant
PVR_VER_xxxx values for the 7450 family:
0x8000 ==> 7450
0x8001 ==> 7455
0x8002 ==> 7447
0x8003 ==> 7447A
0x8004 ==> 7448
And use them to detect 7450 family for perf events.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202302260657.7dM9Uwev-lkp@intel.com/
Fixes: ec3eb9d941a9 ("powerpc/perf: Use PVR rather than oprofile field to determine CPU version")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/99ca1da2e5a6cf82a8abf4bc034918e500e31781.1677513277.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nathan Lynch <nathanl@linux.ibm.com>
Date: Mon Mar 6 15:33:41 2023 -0600
powerpc/rtas: use memmove for potentially overlapping buffer copy
[ Upstream commit 271208ee5e335cb1ad280d22784940daf7ddf820 ]
Using memcpy() isn't safe when buf is identical to rtas_err_buf, which
can happen during boot before slab is up. Full context which may not
be obvious from the diff:
if (altbuf) {
buf = altbuf;
} else {
buf = rtas_err_buf;
if (slab_is_available())
buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
}
if (buf)
memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
This was found by inspection and I'm not aware of it causing problems
in practice. It appears to have been introduced by commit
033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the
old ppc64 version of this code did not have this problem.
Use memmove() instead.
Fixes: 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-2-010e4416f13f@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Wed Feb 22 23:01:16 2023 -0800
powerpc/sysdev/tsi108: fix resource printk format warnings
[ Upstream commit 55d8bd02cc1b9f1063993b5c42c9cabf4af67dea ]
Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.
arch/powerpc/sysdev/tsi108_pci.c: In function 'tsi108_setup_pci':
include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t'
Fixes: c4342ff92bed ("[POWERPC] Update mpc7448hpc2 board irq support using device tree")
Fixes: 2b9d7467a6db ("[POWERPC] Add tsi108 pci and platform device data register function")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[mpe: Use pr_info() and unsplit string]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-5-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Wed Feb 22 23:01:14 2023 -0800
powerpc/wii: fix resource printk format warnings
[ Upstream commit 7b69600d4da0049244e9be2f5ef5a2f8e04fcd9a ]
Use "%pa" format specifier for resource_size_t to avoid compiler
printk format warnings.
../arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/flipper-pic.c:148:9: note: in expansion of macro 'pr_info'
148 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
| ^~~~~~~
../arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:174:9: note: in expansion of macro 'pr_info'
174 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
| ^~~~~~~
../arch/powerpc/platforms/embedded6xx/wii.c: In function 'wii_ioremap_hw_regs':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/wii.c:77:17: note: in expansion of macro 'pr_info'
77 | pr_info("%s at 0x%08x mapped to 0x%p\n", name,
| ^~~~~~~
Fixes: 028ee972f032 ("powerpc: gamecube/wii: flipper interrupt controller support")
Fixes: 9c21025c7845 ("powerpc: wii: hollywood interrupt controller support")
Fixes: 5a7ee3198dfa ("powerpc: wii: platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-3-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: John Stultz <jstultz@google.com>
Date: Wed Mar 8 20:40:43 2023 +0000
pstore: Revert pmsg_lock back to a normal mutex
[ Upstream commit 5239a89b06d6b199f133bf0ffea421683187f257 ]
This reverts commit 76d62f24db07f22ccf9bc18ca793c27d4ebef721.
So while priority inversion on the pmsg_lock is an occasional
problem that an rt_mutex would help with, in uses where logging
is writing to pmsg heavily from multiple threads, the pmsg_lock
can be heavily contended.
After this change landed, it was reported that cases where the
mutex locking overhead was commonly adding on the order of 10s
of usecs delay had suddenly jumped to ~msec delay with rtmutex.
It seems the slight differences in the locks under this level
of contention causes the normal mutexes to utilize the spinning
optimizations, while the rtmutexes end up in the sleeping
slowpath (which allows additional threads to pile on trying
to take the lock).
In this case, it devolves to a worse case senerio where the lock
acquisition and scheduling overhead dominates, and each thread
is waiting on the order of ~ms to do ~us of work.
Obviously, having tons of threads all contending on a single
lock for logging is non-optimal, so the proper fix is probably
reworking pstore pmsg to have per-cpu buffers so we don't have
contention.
Additionally, Steven Rostedt has provided some furhter
optimizations for rtmutexes that improves the rtmutex spinning
path, but at least in my testing, I still see the test tripping
into the sleeping path on rtmutexes while utilizing the spinning
path with mutexes.
But in the short term, lets revert the change to the rt_mutex
and go back to normal mutexes to avoid a potentially major
performance regression. And we can work on optimizations to both
rtmutexes and finer-grained locking for pstore pmsg in the
future.
Cc: Wei Wang <wvw@google.com>
Cc: Midas Chien<midaschieh@google.com>
Cc: "Chunhui Li (李春辉)" <chunhui.li@mediatek.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: kernel-team@android.com
Fixes: 76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion")
Reported-by: "Chunhui Li (李春辉)" <chunhui.li@mediatek.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230308204043.2061631-1-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Heiner Kallweit <hkallweit1@gmail.com>
Date: Sun Apr 9 17:15:52 2023 +0200
pwm: meson: Fix axg ao mux parents
commit eb411c0cf59ae6344b34bc6f0d298a22b300627e upstream.
This fix is basically the same as 9bce02ef0dfa ("pwm: meson: Fix the
G12A AO clock parents order"). Vendor driver referenced there has
xtal as first parent also for axg ao. In addition fix the name
of the aoclk81 clock. Apparently name aoclk81 as used by the vendor
driver was changed when mainlining the axg clock driver.
Fixes: bccaa3f917c9 ("pwm: meson: Add clock source configuration for Meson-AXG")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Heiner Kallweit <hkallweit1@gmail.com>
Date: Tue Apr 11 07:34:11 2023 +0200
pwm: meson: Fix g12a ao clk81 name
commit 9e4fa80ab7ef9eb4f7b1ea9fc31e0eb040e85e25 upstream.
Fix the name of the aoclk81 clock. Apparently name aoclk81 as used by
the vendor driver was changed when mainlining the g12a clock driver.
Fixes: f41efceb46e6 ("pwm: meson: Add clock source configuration for Meson G12A")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Mon Apr 3 15:30:54 2023 +0200
pwm: mtk-disp: Configure double buffering before reading in .get_state()
[ Upstream commit b16c310115f2084b8826a35b77ef42bab6786d9f ]
The DISP_PWM controller's default behavior is to always use register
double buffering: all reads/writes are then performed on shadow
registers instead of working registers and this becomes an issue
in case our chosen configuration in Linux is different from the
default (or from the one that was pre-applied by the bootloader).
An example of broken behavior is when the controller is configured
to use shadow registers, but this driver wants to configure it
otherwise: what happens is that the .get_state() callback is called
right after registering the pwmchip and checks whether the PWM is
enabled by reading the DISP_PWM_EN register;
At this point, if shadow registers are enabled but their content
was not committed before booting Linux, we are *not* reading the
current PWM enablement status, leading to the kernel knowing that
the hardware is actually enabled when, in reality, it's not.
The aforementioned issue emerged since this driver was fixed with
commit 0b5ef3429d8f ("pwm: mtk-disp: Fix the parameters calculated
by the enabled flag of disp_pwm") making it to read the enablement
status from the right register.
Configure the controller in the .get_state() callback to avoid
this desync issue and get the backlight properly working again.
Fixes: 3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Mon Apr 3 15:30:53 2023 +0200
pwm: mtk-disp: Disable shadow registers before setting backlight values
[ Upstream commit 36dd7f530ae7d9ce9e853ffb8aa337de65c6600b ]
If shadow registers usage is not desired, disable that before performing
any write to CON0/1 registers in the .apply() callback, otherwise we may
lose clkdiv or period/width updates.
Fixes: cd4b45ac449a ("pwm: Add MediaTek MT2701 display PWM driver support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zheng Yejian <zhengyejian1@huawei.com>
Date: Fri Jan 6 15:09:34 2023 +0800
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
commit 7a29fb4a4771124bc61de397dbfc1554dbbcc19c upstream.
Registering a kprobe on __rcu_irq_enter_check_tick() can cause kernel
stack overflow as shown below. This issue can be reproduced by enabling
CONFIG_NO_HZ_FULL and booting the kernel with argument "nohz_full=",
and then giving the following commands at the shell prompt:
# cd /sys/kernel/tracing/
# echo 'p:mp1 __rcu_irq_enter_check_tick' >> kprobe_events
# echo 1 > events/kprobes/enable
This commit therefore adds __rcu_irq_enter_check_tick() to the kprobes
blacklist using NOKPROBE_SYMBOL().
Insufficient stack space to handle exception!
ESR: 0x00000000f2000004 -- BRK (AArch64)
FAR: 0x0000ffffccf3e510
Task stack: [0xffff80000ad30000..0xffff80000ad38000]
IRQ stack: [0xffff800008050000..0xffff800008058000]
Overflow stack: [0xffff089c36f9f310..0xffff089c36fa0310]
CPU: 5 PID: 190 Comm: bash Not tainted 6.2.0-rc2-00320-g1f5abbd77e2c #19
Hardware name: linux,dummy-virt (DT)
pstate: 400003c5 (nZcv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __rcu_irq_enter_check_tick+0x0/0x1b8
lr : ct_nmi_enter+0x11c/0x138
sp : ffff80000ad30080
x29: ffff80000ad30080 x28: ffff089c82e20000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff089c02a8d100 x24: 0000000000000000
x23: 00000000400003c5 x22: 0000ffffccf3e510 x21: ffff089c36fae148
x20: ffff80000ad30120 x19: ffffa8da8fcce148 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffffa8da8e44ea6c
x14: ffffa8da8e44e968 x13: ffffa8da8e03136c x12: 1fffe113804d6809
x11: ffff6113804d6809 x10: 0000000000000a60 x9 : dfff800000000000
x8 : ffff089c026b404f x7 : 00009eec7fb297f7 x6 : 0000000000000001
x5 : ffff80000ad30120 x4 : dfff800000000000 x3 : ffffa8da8e3016f4
x2 : 0000000000000003 x1 : 0000000000000000 x0 : 0000000000000000
Kernel panic - not syncing: kernel stack overflow
CPU: 5 PID: 190 Comm: bash Not tainted 6.2.0-rc2-00320-g1f5abbd77e2c #19
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0xf8/0x108
show_stack+0x20/0x30
dump_stack_lvl+0x68/0x84
dump_stack+0x1c/0x38
panic+0x214/0x404
add_taint+0x0/0xf8
panic_bad_stack+0x144/0x160
handle_bad_stack+0x38/0x58
__bad_stack+0x78/0x7c
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
[...]
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
el1_interrupt+0x28/0x60
el1h_64_irq_handler+0x18/0x28
el1h_64_irq+0x64/0x68
__ftrace_set_clr_event_nolock+0x98/0x198
__ftrace_set_clr_event+0x58/0x80
system_enable_write+0x144/0x178
vfs_write+0x174/0x738
ksys_write+0xd0/0x188
__arm64_sys_write+0x4c/0x60
invoke_syscall+0x64/0x180
el0_svc_common.constprop.0+0x84/0x160
do_el0_svc+0x48/0xe8
el0_svc+0x34/0xd0
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x190/0x194
SMP: stopping secondary CPUs
Kernel Offset: 0x28da86000000 from 0xffff800008000000
PHYS_OFFSET: 0xfffff76600000000
CPU features: 0x00000,01a00100,0000421b
Memory Limit: none
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/all/20221119040049.795065-1-zhengyejian1@huawei.com/
Fixes: aaf2bc50df1f ("rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zqiang <qiang1.zhang@intel.com>
Date: Tue Dec 20 22:16:25 2022 +0800
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
[ Upstream commit db7b464df9d820186e98a65aa6a10f0d51fbf8ce ]
This commit adds checks for the TICK_DEP_MASK_RCU_EXP bit, thus enabling
RCU expedited grace periods to actually force-enable scheduling-clock
interrupts on holdout CPUs.
Fixes: df1e849ae455 ("rcu: Enable tick for nohz_full CPUs slow to provide expedited QS")
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Zhang <markzhang@nvidia.com>
Date: Thu Mar 30 10:23:51 2023 +0300
RDMA/cm: Trace icm_send_rej event before the cm state is reset
[ Upstream commit bd9de1badac7e4ff6780365d4aa38983f5e2a436 ]
Trace icm_send_rej event before the cm state is reset to idle, so that
correct cm state will be logged. For example when an incoming request is
rejected, the old trace log was:
icm_send_rej: local_id=961102742 remote_id=3829151631 state=IDLE reason=REJ_CONSUMER_DEFINED
With this patch:
icm_send_rej: local_id=312971016 remote_id=3778819983 state=MRA_REQ_SENT reason=REJ_CONSUMER_DEFINED
Fixes: 8dc105befe16 ("RDMA/cm: Add tracepoints to track MAD send operations")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/20230330072351.481200-1-markzhang@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cheng Xu <chengyou@linux.alibaba.com>
Date: Tue Mar 7 18:29:23 2023 +0800
RDMA/erdma: Use fixed hardware page size
[ Upstream commit d649c638dc26f3501da510cf7fceb5c15ca54258 ]
Hardware's page size is 4096, but the kernel's page size may vary. Driver
should use hardware's page size when communicating with hardware.
Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Link: https://lore.kernel.org/r/20230307102924.70577-2-chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Tue Mar 7 12:51:27 2023 +0300
RDMA/mlx4: Prevent shift wrapping in set_user_sq_size()
[ Upstream commit d50b3c73f1ac20dabc53dc6e9d64ce9c79a331eb ]
The ucmd->log_sq_bb_count variable is controlled by the user so this
shift can wrap. Fix it by using check_shl_overflow() in the same way
that it was done in commit 515f60004ed9 ("RDMA/hns: Prevent undefined
behavior in hns_roce_set_user_sq_size()").
Fixes: 839041329fd3 ("IB/mlx4: Sanity check userspace send queue sizes")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/a8dfbd1d-c019-4556-930b-bab1ded73b10@kili.mountain
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Avihai Horon <avihaih@nvidia.com>
Date: Mon Apr 10 16:07:51 2023 +0300
RDMA/mlx5: Check pcie_relaxed_ordering_enabled() in UMR
[ Upstream commit d43b020b0f82c088ef8ff3196ef00575a97d200e ]
relaxed_ordering_read HCA capability is set if both the device supports
relaxed ordering (RO) read and RO is set in PCI config space.
RO in PCI config space can change during runtime. This will change the
value of relaxed_ordering_read HCA capability in FW, but the driver will
not see it since it queries the capabilities only once.
This can lead to the following scenario:
1. RO in PCI config space is enabled.
2. User creates MKey without RO.
3. RO in PCI config space is disabled.
As a result, relaxed_ordering_read HCA capability is turned off in FW
but remains on in driver copy of the capabilities.
4. User requests to reconfig the MKey with RO via UMR.
5. Driver will try to reconfig the MKey with RO read although it
shouldn't (as relaxed_ordering_read HCA capability is really off).
To fix this, check pcie_relaxed_ordering_enabled() before setting RO
read in UMR.
Fixes: 896ec9735336 ("RDMA/mlx5: Set mkey relaxed ordering by UMR with ConnectX-7")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Link: https://lore.kernel.org/r/8d39eb8317e7bed1a354311a20ae707788fd94ed.1681131553.git.leon@kernel.org
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Bloch <mbloch@nvidia.com>
Date: Thu Apr 13 12:23:09 2023 +0300
RDMA/mlx5: Fix flow counter query via DEVX
[ Upstream commit 3e358ea8614ddfbc59ca7a3f5dff5dde2b350b2c ]
Commit cited in "fixes" tag added bulk support for flow counters but it
didn't account that's also possible to query a counter using a non-base id
if the counter was allocated as bulk.
When a user performs a query, validate the flow counter id given in the
mailbox is inside the valid range taking bulk value into account.
Fixes: 208d70f562e5 ("IB/mlx5: Support flow counters offset for bulk counters")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/79d7fbe291690128e44672418934256254d93115.1681377114.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Zhang <markzhang@nvidia.com>
Date: Thu Apr 20 04:39:06 2023 +0300
RDMA/mlx5: Use correct device num_ports when modify DC
[ Upstream commit 746aa3c8cb1a650ff2583497ac646e505831b9b9 ]
Just like other QP types, when modify DC, the port_num should be compared
with dev->num_ports, instead of HCA_CAP.num_ports. Otherwise Multi-port
vHCA on DC may not work.
Fixes: 776a3906b692 ("IB/mlx5: Add support for DC target QP")
Link: https://lore.kernel.org/r/20230420013906.1244185-1-markzhang@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Natalia Petrova <n.petrova@fintech.ru>
Date: Fri Mar 3 15:44:08 2023 +0300
RDMA/rdmavt: Delete unnecessary NULL check
[ Upstream commit b73a0b80c69de77d8d4942abb37066531c0169b2 ]
There is no need to check 'rdi->qp_dev' for NULL. The field 'qp_dev'
is created in rvt_register_device() which will fail if the 'qp_dev'
allocation fails in rvt_driver_qp_init(). Overwise this pointer
doesn't changed and passed to rvt_qp_exit() by the next step.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0acb0cc7ecc1 ("IB/rdmavt: Initialize and teardown of qpn table")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Link: https://lore.kernel.org/r/20230303124408.16685-1-n.petrova@fintech.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bob Pearson <rpearsonhpe@gmail.com>
Date: Sat Mar 4 11:45:27 2023 -0600
RDMA/rxe: Convert tasklet args to queue pairs
[ Upstream commit 3946fc2a42b18cf0b675121158a2625825ce27b5 ]
Originally is was thought that the tasklet machinery in rxe_task.c would
be used in other applications but that has not happened for years. This
patch replaces the 'void *arg' by struct 'rxe_qp *qp' in the parameters to
the tasklet calls. This change will have no affect on performance but may
make the code a little clearer.
Link: https://lore.kernel.org/r/20230304174533.11296-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: b2b1ddc45745 ("RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task"")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhu Yanjun <yanjun.zhu@linux.dev>
Date: Thu Apr 13 18:11:15 2023 +0800
RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task"
[ Upstream commit b2b1ddc457458fecd1c6f385baa9fbda5f0c63ad ]
In the function rxe_create_qp(), rxe_qp_from_init() is called to
initialize qp, internally things like rxe_init_task are not setup until
rxe_qp_init_req().
If an error occurred before this point then the unwind will call
rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task()
which will oops when trying to access the uninitialized spinlock.
If rxe_init_task is not executed, rxe_cleanup_task will not be called.
Reported-by: syzbot+cfcc1a3c85be15a40cba@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=fd85757b74b3eb59f904138486f755f71e090df8
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Fixes: 2d4b21e0a291 ("IB/rxe: Prevent from completer to operate on non valid QP")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://lore.kernel.org/r/20230413101115.1366068-1-yanjun.zhu@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bob Pearson <rpearsonhpe@gmail.com>
Date: Sat Mar 4 11:45:32 2023 -0600
RDMA/rxe: Remove __rxe_do_task()
[ Upstream commit 960ebe97e5238565d15063c8f4d1b2108efe2e65 ]
The subroutine __rxe_do_task is not thread safe and it has no way to
guarantee that the tasks, which are designed with the assumption that they
are non-reentrant, are not reentered. All of its uses are non-performance
critical.
This patch replaces calls to __rxe_do_task with calls to
rxe_sched_task. It also removes irrelevant or unneeded if tests.
Instead of calling the task machinery a single call to the tasklet
function (rxe_requester, etc.) is sufficient to draing the queues if task
execution has been disabled or stopped.
Together these changes allow the removal of __rxe_do_task.
Link: https://lore.kernel.org/r/20230304174533.11296-7-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: b2b1ddc45745 ("RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task"")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bob Pearson <rpearsonhpe@gmail.com>
Date: Mon Mar 27 16:56:44 2023 -0500
RDMA/rxe: Remove tasklet call from rxe_cq.c
[ Upstream commit 78b26a335310a097d6b22581b706050db42f196c ]
Remove the tasklet call in rxe_cq.c and also the is_dying in the
cq struct. There is no reason for the rxe driver to defer the call
to the cq completion handler by scheduling a tasklet. rxe_cq_post()
is not called in a hard irq context.
The rxe driver currently is incorrect because the tasklet call is
made without protecting the cq pointer with a reference from having
the underlying memory freed before the deferred routine is called.
Executing the comp_handler inline fixes this problem.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Link: https://lore.kernel.org/r/20230327215643.10410-1-rpearsonhpe@gmail.com
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bob Pearson <rpearsonhpe@gmail.com>
Date: Fri Mar 3 16:16:21 2023 -0600
RDMA/rxe: Replace exists by rxe in rxe.c
[ Upstream commit 9168d125ea032ad199275193493c13cb077da5cc ]
'exists' looks like a boolean. This patch replaces it by the
normal name used for the rxe device, 'rxe', which should be a
little less confusing. The second rxe_dbg() message is
incorrect since rxe is known to be NULL and this will cause a
seg fault if this message were ever sent. Replace it by pr_debug
for the moment.
Fixes: c6aba5ea0055 ("RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe.c")
Link: https://lore.kernel.org/r/20230303221623.8053-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniil Dulov <d.dulov@aladdin.ru>
Date: Mon Feb 27 01:17:51 2023 -0800
RDMA/siw: Fix potential page_array out of range access
[ Upstream commit 271bfcfb83a9f77cbae3d6e1a16e3c14132922f0 ]
When seg is equal to MAX_ARRAY, the loop should break, otherwise
it will result in out of range access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b9be6f18cf9e ("rdma/siw: transmit path")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://lore.kernel.org/r/20230227091751.589612-1-d.dulov@aladdin.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Sun Apr 2 14:10:13 2023 +0900
RDMA/siw: Remove namespace check from siw_netdev_event()
[ Upstream commit 266e9b3475ba82212062771fdbc40be0e3c06ec8 ]
syzbot is reporting that siw_netdev_event(NETDEV_UNREGISTER) cannot destroy
siw_device created after unshare(CLONE_NEWNET) due to net namespace check.
It seems that this check was by error there and should be removed.
Reported-by: syzbot <syzbot+5e70d01ee8985ae62a3b@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=5e70d01ee8985ae62a3b
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Suggested-by: Leon Romanovsky <leon@kernel.org>
Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/a44e9ac5-44e2-d575-9e30-02483cc7ffd1@I-love.SAKURA.ne.jp
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Date: Wed Apr 5 21:25:49 2023 -0700
RDMA/srpt: Add a check for valid 'mad_agent' pointer
[ Upstream commit eca5cd9474cd26d62f9756f536e2e656d3f62f3a ]
When unregistering MAD agent, srpt module has a non-null check
for 'mad_agent' pointer before invoking ib_unregister_mad_agent().
This check can pass if 'mad_agent' variable holds an error value.
The 'mad_agent' can have an error value for a short window when
srpt_add_one() and srpt_remove_one() is executed simultaneously.
In srpt module, added a valid pointer check for 'sport->mad_agent'
before unregistering MAD agent.
This issue can hit when RoCE driver unregisters ib_device
Stack Trace:
------------
BUG: kernel NULL pointer dereference, address: 000000000000004d
PGD 145003067 P4D 145003067 PUD 2324fe067 PMD 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 10 PID: 4459 Comm: kworker/u80:0 Kdump: loaded Tainted: P
Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.5.4 01/13/2020
Workqueue: bnxt_re bnxt_re_task [bnxt_re]
RIP: 0010:_raw_spin_lock_irqsave+0x19/0x40
Call Trace:
ib_unregister_mad_agent+0x46/0x2f0 [ib_core]
IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
? __schedule+0x20b/0x560
srpt_unregister_mad_agent+0x93/0xd0 [ib_srpt]
srpt_remove_one+0x20/0x150 [ib_srpt]
remove_client_context+0x88/0xd0 [ib_core]
bond0: (slave p2p1): link status definitely up, 100000 Mbps full duplex
disable_device+0x8a/0x160 [ib_core]
bond0: active interface up!
? kernfs_name_hash+0x12/0x80
(NULL device *): Bonding Info Received: rdev: 000000006c0b8247
__ib_unregister_device+0x42/0xb0 [ib_core]
(NULL device *): Master: mode: 4 num_slaves:2
ib_unregister_device+0x22/0x30 [ib_core]
(NULL device *): Slave: id: 105069936 name:p2p1 link:0 state:0
bnxt_re_stopqps_and_ib_uninit+0x83/0x90 [bnxt_re]
bnxt_re_alloc_lag+0x12e/0x4e0 [bnxt_re]
Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Link: https://lore.kernel.org/r/20230406042549.507328-1-saravanan.vajravel@broadcom.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Douglas Anderson <dianders@chromium.org>
Date: Wed Mar 29 14:33:54 2023 -0700
regulator: core: Avoid lockdep reports when resolving supplies
[ Upstream commit cba6cfdc7c3f1516f0d08ddfb24e689af0932573 ]
An automated bot told me that there was a potential lockdep problem
with regulators. This was on the chromeos-5.15 kernel, but I see
nothing that would be different downstream compared to upstream. The
bot said:
============================================
WARNING: possible recursive locking detected
5.15.104-lockdep-17461-gc1e499ed6604 #1 Not tainted
--------------------------------------------
kworker/u16:4/115 is trying to acquire lock:
ffffff8083110170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: create_regulator+0x398/0x7ec
but task is already holding lock:
ffffff808378e170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: ww_mutex_trylock+0x3c/0x7b8
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(regulator_ww_class_mutex);
lock(regulator_ww_class_mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by kworker/u16:4/115:
#0: ffffff808006a948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x520/0x1348
#1: ffffffc00e0a7cc0 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x55c/0x1348
#2: ffffff80828a2260 (&dev->mutex){....}-{3:3}, at: __device_attach_async_helper+0xd0/0x2a4
#3: ffffff808378e170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: ww_mutex_trylock+0x3c/0x7b8
stack backtrace:
CPU: 2 PID: 115 Comm: kworker/u16:4 Not tainted 5.15.104-lockdep-17461-gc1e499ed6604 #1 9292e52fa83c0e23762b2b3aa1bacf5787a4d5da
Hardware name: Google Quackingstick (rev0+) (DT)
Workqueue: events_unbound async_run_entry_fn
Call trace:
dump_backtrace+0x0/0x4ec
show_stack+0x34/0x50
dump_stack_lvl+0xdc/0x11c
dump_stack+0x1c/0x48
__lock_acquire+0x16d4/0x6c74
lock_acquire+0x208/0x750
__mutex_lock_common+0x11c/0x11f8
ww_mutex_lock+0xc0/0x440
create_regulator+0x398/0x7ec
regulator_resolve_supply+0x654/0x7c4
regulator_register_resolve_supply+0x30/0x120
class_for_each_device+0x1b8/0x230
regulator_register+0x17a4/0x1f40
devm_regulator_register+0x60/0xd0
reg_fixed_voltage_probe+0x728/0xaec
platform_probe+0x150/0x1c8
really_probe+0x274/0xa20
__driver_probe_device+0x1dc/0x3f4
driver_probe_device+0x78/0x1c0
__device_attach_driver+0x1ac/0x2c8
bus_for_each_drv+0x11c/0x190
__device_attach_async_helper+0x1e4/0x2a4
async_run_entry_fn+0xa0/0x3ac
process_one_work+0x638/0x1348
worker_thread+0x4a8/0x9c4
kthread+0x2e4/0x3a0
ret_from_fork+0x10/0x20
The problem was first reported soon after we made many of the
regulators probe asynchronously, though nothing I've seen implies that
the problems couldn't have also happened even without that.
I haven't personally been able to reproduce the lockdep issue, but the
issue does look somewhat legitimate. Specifically, it looks like in
regulator_resolve_supply() we are holding a "rdev" lock while calling
set_supply() -> create_regulator() which grabs the lock of a
_different_ "rdev" (the one for our supply). This is not necessarily
safe from a lockdep perspective since there is no documented ordering
between these two locks.
In reality, we should always be locking a regulator before the
supplying regulator, so I don't expect there to be any real deadlocks
in practice. However, the regulator framework in general doesn't
express this to lockdep.
Let's fix the issue by simply grabbing the two locks involved in the
same way we grab multiple locks elsewhere in the regulator framework:
using the "wound/wait" mechanisms.
Fixes: eaa7995c529b ("regulator: core: avoid regulator_resolve_supply() race condition")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230329143317.RFC.v2.2.I30d8e1ca10cfbe5403884cdd192253a2e063eb9e@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Douglas Anderson <dianders@chromium.org>
Date: Wed Mar 29 14:33:53 2023 -0700
regulator: core: Consistently set mutex_owner when using ww_mutex_lock_slow()
[ Upstream commit b83a1772be854f87602de14726737d3e5b06e1f4 ]
When a codepath locks a rdev using ww_mutex_lock_slow() directly then
that codepath is responsible for incrementing the "ref_cnt" and also
setting the "mutex_owner" to "current".
The regulator core consistently got that right for "ref_cnt" but
didn't always get it right for "mutex_owner". Let's fix this.
It's unlikely that this truly matters because the "mutex_owner" is
only needed if we're going to do subsequent locking of the same
rdev. However, even though it's not truly needed it seems less
surprising if we consistently set "mutex_owner" properly.
Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230329143317.RFC.v2.1.I4e9d433ea26360c06dd1381d091c82bb1a4ce843@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Douglas Anderson <dianders@chromium.org>
Date: Mon Mar 13 11:18:19 2023 -0700
regulator: core: Shorten off-on-delay-us for always-on/boot-on by time since booted
[ Upstream commit 691c1fcda5351ed98a44610b7dccc0e3ee920020 ]
This is very close to a straight revert of commit 218320fec294
("regulator: core: Fix off-on-delay-us for always-on/boot-on
regulators"). We've identified that patch as causing a boot speed
regression on sc7180-trogdor boards. While boot speed certainly isn't
more important than making sure that power sequencing is correct,
looking closely at the original change it doesn't seem to have been
fully justified. It mentions "cycling issues" without describing
exactly what the issues were. That means it's possible that the
cycling issues were really a problem that should be fixed in a
different way.
Let's take a careful look at how we should handle regulators that have
an off-on-delay and that are boot-on or always-on. Linux currently
doesn't have any way to identify whether a GPIO regulator was already
on when the kernel booted. That means that when the kernel boots we
probe a regulator, see that it wants boot-on / always-on we, and then
turn the regulator on. We could be in one of two cases when we do
this:
a) The regulator might have been left on by the bootloader and we're
ensuring that it stays on.
b) The regulator might have been left off by the bootloader and we're
just now turning it on.
For case a) we definitely don't need any sort of delay. For case b) we
_might_ need some delay in case the bootloader turned the regulator
off _right_ before booting the kernel. To get the proper delay for
case b) then we can just assume a `last_off` of 0, which is what it
gets initialized to by default.
As per above, we can't tell whether we're in case a) or case b) so
we'll assume the longer delay (case b). This basically puts the code
to how it was before commit 218320fec294 ("regulator: core: Fix
off-on-delay-us for always-on/boot-on regulators"). However, we add
one important change: we make sure that the delay is actually honored
if `last_off` is 0. Though the original "cycling issues" cited were
vague, I'm hopeful that this important extra change will be enough to
fix the issues that the initial commit mentioned.
With this fix, I've confined that on a sc7180-trogdor board the delay
at boot goes down from 500 ms to ~250 ms. That's not as good as the 0
ms that we had prior to commit 218320fec294 ("regulator: core: Fix
off-on-delay-us for always-on/boot-on regulators"), but it's probably
safer because we don't know if the bootloader turned the regulator off
right before booting.
One note is that it's possible that we could be in a state that's not
a) or b) if there are other issues in the kernel. The only one I can
think of is related to pinctrl. If the pinctrl driver being used on a
board isn't careful about avoiding glitches when setting up a pin then
it's possible that setting up a pin could cause the regulator to "turn
off" briefly immediately before the regulator probes. If this is
indeed causing problems then the pinctrl driver should be fixed,
perhaps in a similar way to what was done in commit d21f4b7ffc22
("pinctrl: qcom: Avoid glitching lines when we first mux to output")
Fixes: 218320fec294 ("regulator: core: Fix off-on-delay-us for always-on/boot-on regulators")
Cc: Christian Kohlschütter <christian@kohlschutter.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230313111806.1.I2eaad872be0932a805c239a7c7a102233fb0b03b@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: YAN SHI <m202071378@hust.edu.cn>
Date: Wed Apr 12 11:35:29 2023 +0800
regulator: stm32-pwr: fix of_iomap leak
[ Upstream commit c4a413e56d16a2ae84e6d8992f215c4dcc7fac20 ]
Smatch reports:
drivers/regulator/stm32-pwr.c:166 stm32_pwr_regulator_probe() warn:
'base' from of_iomap() not released on lines: 151,166.
In stm32_pwr_regulator_probe(), base is not released
when devm_kzalloc() fails to allocate memory or
devm_regulator_register() fails to register a new regulator device,
which may cause a leak.
To fix this issue, replace of_iomap() with
devm_platform_ioremap_resource(). devm_platform_ioremap_resource()
is a specialized function for platform devices.
It allows 'base' to be automatically released whether the probe
function succeeds or fails.
Besides, use IS_ERR(base) instead of !base
as the return value of devm_platform_ioremap_resource()
can either be a pointer to the remapped memory or
an ERR_PTR() encoded error code if the operation fails.
Fixes: dc62f951a6a8 ("regulator: stm32-pwr: Fix return value check in stm32_pwr_regulator_probe()")
Signed-off-by: YAN SHI <m202071378@hust.edu.cn>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304111750.o2643eJN-lkp@intel.com/
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230412033529.18890-1-m202071378@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Roberto Sassu <roberto.sassu@huawei.com>
Date: Fri Mar 31 14:32:18 2023 +0200
reiserfs: Add security prefix to xattr name in reiserfs_security_write()
commit d82dcd9e21b77d338dc4875f3d4111f0db314a7c upstream.
Reiserfs sets a security xattr at inode creation time in two stages: first,
it calls reiserfs_security_init() to obtain the xattr from active LSMs;
then, it calls reiserfs_security_write() to actually write that xattr.
Unfortunately, it seems there is a wrong expectation that LSMs provide the
full xattr name in the form 'security.<suffix>'. However, LSMs always
provided just the suffix, causing reiserfs to not write the xattr at all
(if the suffix is shorter than the prefix), or to write an xattr with the
wrong name.
Add a temporary buffer in reiserfs_security_write(), and write to it the
full xattr name, before passing it to reiserfs_xattr_set_handle().
Also replace the name length check with a check that the full xattr name is
not larger than XATTR_NAME_MAX.
Cc: stable@vger.kernel.org # v2.6.x
Fixes: 57fe60df6241 ("reiserfs: add atomic addition of selinux attributes during inode creation")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhang Zhengming <zhang.zhengming@h3c.com>
Date: Wed Apr 19 12:02:03 2023 +0800
relayfs: fix out-of-bounds access in relay_file_read
commit 43ec16f1450f4936025a9bdf1a273affdb9732c1 upstream.
There is a crash in relay_file_read, as the var from
point to the end of last subbuf.
The oops looks something like:
pc : __arch_copy_to_user+0x180/0x310
lr : relay_file_read+0x20c/0x2c8
Call trace:
__arch_copy_to_user+0x180/0x310
full_proxy_read+0x68/0x98
vfs_read+0xb0/0x1d0
ksys_read+0x6c/0xf0
__arm64_sys_read+0x20/0x28
el0_svc_common.constprop.3+0x84/0x108
do_el0_svc+0x74/0x90
el0_svc+0x1c/0x28
el0_sync_handler+0x88/0xb0
el0_sync+0x148/0x180
We get the condition by analyzing the vmcore:
1). The last produced byte and last consumed byte
both at the end of the last subbuf
2). A softirq calls function(e.g __blk_add_trace)
to write relay buffer occurs when an program is calling
relay_file_read_avail().
relay_file_read
relay_file_read_avail
relay_file_read_consume(buf, 0, 0);
//interrupted by softirq who will write subbuf
....
return 1;
//read_start point to the end of the last subbuf
read_start = relay_file_read_start_pos
//avail is equal to subsize
avail = relay_file_read_subbuf_avail
//from points to an invalid memory address
from = buf->start + read_start
//system is crashed
copy_to_user(buffer, from, avail)
Link: https://lkml.kernel.org/r/20230419040203.37676-1-zhang.zhengming@h3c.com
Fixes: 8d62fdebdaf9 ("relay file read: start-pos fix")
Signed-off-by: Zhang Zhengming <zhang.zhengming@h3c.com>
Reviewed-by: Zhao Lei <zhao_lei1@hoperun.com>
Reviewed-by: Zhou Kete <zhou.kete@h3c.com>
Reviewed-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Liu Jian <liujian56@huawei.com>
Date: Fri Apr 14 18:30:06 2023 +0800
Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work"
[ Upstream commit db2bf510bd5d57f064d9e1db395ed86a08320c54 ]
This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f.
This patch introduces a possible null-ptr-def problem. Revert it. And the
fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth:
btsdio: fix use after free bug in btsdio_remove due to race condition").
Fixes: 1e9ac114c442 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Moshe Shemesh <moshe@nvidia.com>
Date: Sun Apr 9 10:44:31 2023 +0300
Revert "net/mlx5: Remove "recovery" arg from mlx5_load_one() function"
[ Upstream commit 21608a2cf38e9f743636b5f86507ffbca18ecee7 ]
This reverts commit 5977ac3910f1cbaf44dca48179118b25c206ac29.
Revert this patch as we need the "recovery" arg back in mlx5_load_one()
function. This arg will be used in the next patch for using recovery
timeout during sync reset flow.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: dfad99750c0f ("net/mlx5: Use recovery timeout on sync reset flow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vlad Buslov <vladbu@nvidia.com>
Date: Thu Apr 13 15:06:59 2023 +0200
Revert "net/mlx5e: Don't use termination table when redundant"
[ Upstream commit 081abcacaf0a9505c0d4cc9780b12e6ce5d33630 ]
This reverts commit 14624d7247fcd0f3114a6f5f17b3c8d1020fbbb7.
The termination table usage is requires for DMFS steering mode as firmware
doesn't support mixed table destinations list which causes following
syndrome with hairpin rules:
[81922.283225] mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 25977): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xaca205), err(-22)
Fixes: 14624d7247fc ("net/mlx5e: Don't use termination table when redundant")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Josh Poimboeuf <jpoimboe@kernel.org>
Date: Wed Apr 12 10:29:01 2023 -0700
Revert "objtool: Support addition to set CFA base"
[ Upstream commit e18398e80c73e3cc7d9c3d2e0bc06a4af8f4f1cb ]
Commit 468af56a7bba ("objtool: Support addition to set CFA base") was
added as a preparatory patch for arm64 support, but that support never
came. It triggers a false positive warning on x86, so just revert it
for now.
Fixes the following warning:
vmlinux.o: warning: objtool: cdce925_regmap_i2c_write+0xdb: stack state mismatch: cfa1=4+120 cfa2=5+40
Fixes: 468af56a7bba ("objtool: Support addition to set CFA base")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/oe-kbuild-all/202304080538.j5G6h1AB-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhihao Cheng <chengzhihao1@huawei.com>
Date: Wed Mar 1 20:29:18 2023 +0800
Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"
commit 7d01cb27f6aebc54efbe28d8961a973b8f795b13 upstream.
This reverts commit 122deabfe1428 (ubifs: dirty_cow_znode: Fix memleak
in error handling path).
After commit 122deabfe1428 applied, if insert_old_idx() failed, old
index neither exists in TNC nor in old-index tree. Which means that
old index node could be overwritten in layout_leb_in_gaps(), then
ubifs image will be corrupted in power-cut.
Fixes: 122deabfe1428 (ubifs: dirty_cow_znode: Fix memleak ... path)
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Date: Wed Apr 26 14:20:23 2023 +0800
ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus
commit 7c339fb4d8577792378136c15fde773cfb863cb8 upstream.
In ring_buffer_reset_online_cpus, the buffer_size_kb write operation
may permanently fail if the cpu_online_mask changes between two
for_each_online_buffer_cpu loops. The number of increases and decreases
on both cpu_buffer->resize_disabled and cpu_buffer->record_disabled may be
inconsistent, causing some CPUs to have non-zero values for these atomic
variables after the function returns.
This issue can be reproduced by "echo 0 > trace" while hotplugging cpu.
After reproducing success, we can find out buffer_size_kb will not be
functional anymore.
To prevent leaving 'resize_disabled' and 'record_disabled' non-zero after
ring_buffer_reset_online_cpus returns, we ensure that each atomic variable
has been set up before atomic_sub() to it.
Link: https://lore.kernel.org/linux-trace-kernel/20230426062027.17451-1-Tze-nan.Wu@mediatek.com
Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: npiggin@gmail.com
Fixes: b23d7a5f4a07 ("ring-buffer: speed up buffer resets by avoiding synchronize_rcu for each CPU")
Reviewed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Thu Apr 27 17:59:20 2023 +0200
ring-buffer: Sync IRQ works before buffer destruction
commit 675751bb20634f981498c7d66161584080cc061e upstream.
If something was written to the buffer just before destruction,
it may be possible (maybe not in a real system, but it did
happen in ARCH=um with time-travel) to destroy the ringbuffer
before the IRQ work ran, leading this KASAN report (or a crash
without KASAN):
BUG: KASAN: slab-use-after-free in irq_work_run_list+0x11a/0x13a
Read of size 8 at addr 000000006d640a48 by task swapper/0
CPU: 0 PID: 0 Comm: swapper Tainted: G W O 6.3.0-rc1 #7
Stack:
60c4f20f 0c203d48 41b58ab3 60f224fc
600477fa 60f35687 60c4f20f 601273dd
00000008 6101eb00 6101eab0 615be548
Call Trace:
[<60047a58>] show_stack+0x25e/0x282
[<60c609e0>] dump_stack_lvl+0x96/0xfd
[<60c50d4c>] print_report+0x1a7/0x5a8
[<603078d3>] kasan_report+0xc1/0xe9
[<60308950>] __asan_report_load8_noabort+0x1b/0x1d
[<60232844>] irq_work_run_list+0x11a/0x13a
[<602328b4>] irq_work_tick+0x24/0x34
[<6017f9dc>] update_process_times+0x162/0x196
[<6019f335>] tick_sched_handle+0x1a4/0x1c3
[<6019fd9e>] tick_sched_timer+0x79/0x10c
[<601812b9>] __hrtimer_run_queues.constprop.0+0x425/0x695
[<60182913>] hrtimer_interrupt+0x16c/0x2c4
[<600486a3>] um_timer+0x164/0x183
[...]
Allocated by task 411:
save_stack_trace+0x99/0xb5
stack_trace_save+0x81/0x9b
kasan_save_stack+0x2d/0x54
kasan_set_track+0x34/0x3e
kasan_save_alloc_info+0x25/0x28
____kasan_kmalloc+0x8b/0x97
__kasan_kmalloc+0x10/0x12
__kmalloc+0xb2/0xe8
load_elf_phdrs+0xee/0x182
[...]
The buggy address belongs to the object at 000000006d640800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 584 bytes inside of
freed 1024-byte region [000000006d640800, 000000006d640c00)
Add the appropriate irq_work_sync() so the work finishes before
the buffers are destroyed.
Prior to the commit in the Fixes tag below, there was only a
single global IRQ work, so this issue didn't exist.
Link: https://lore.kernel.org/linux-trace-kernel/20230427175920.a76159263122.I8295e405c44362a86c995e9c2c37e3e03810aa56@changeid
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 15693458c4bc ("tracing/ring-buffer: Move poll wake ups into ring buffer code")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrew Jones <ajones@ventanamicro.com>
Date: Thu Apr 27 18:36:26 2023 +0200
RISC-V: Align SBI probe implementation with spec
commit 41cad8284d5e6bf1d49d3c10a6b52ee1ae866a20 upstream.
sbi_probe_extension() is specified with "Returns 0 if the given SBI
extension ID (EID) is not available, or 1 if it is available unless
defined as any other non-zero value by the implementation."
Additionally, sbiret.value is a long. Fix the implementation to
ensure any nonzero long value is considered a success, rather
than only positive int values.
Fixes: b9dcd9e41587 ("RISC-V: Add basic support for SBI v0.2")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230427163626.101042-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alexandre Ghiti <alexghiti@rivosinc.com>
Date: Fri Feb 3 08:52:31 2023 +0100
riscv: Fix ptdump when KASAN is enabled
[ Upstream commit ecd7ebaf0b5a094a6180b299a5635c0eea42be4b ]
The KASAN shadow region was moved next to the kernel mapping but the
ptdump code was not updated and it appears to break the dump of the kernel
page table, so fix this by moving the KASAN shadow region in ptdump.
Fixes: f7ae02333d13 ("riscv: Move KASAN mapping next to the kernel mapping")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230203075232.274282-6-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Song Shuai <suagrfillet@gmail.com>
Date: Wed Apr 26 18:00:09 2023 +0800
riscv: mm: remove redundant parameter of create_fdt_early_page_table
commit e4ef93edd4e0b022529303db1915766ff9de450e upstream.
create_fdt_early_page_table() explicitly uses early_pg_dir for
32-bit fdt mapping and the pgdir parameter is redundant here.
So remove it and its caller.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: ef69d2559fe9 ("riscv: Move early dtb mapping into the fixmap region")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230426100009.685435-1-suagrfillet@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bjorn Andersson <quic_bjorande@quicinc.com>
Date: Tue Apr 18 09:30:17 2023 -0700
rpmsg: glink: Propagate TX failures in intentless mode as well
[ Upstream commit 7a68f9fa97357a0f2073c9c31ed4101da4fce93e ]
As support for splitting transmission over several messages using
TX_DATA_CONT was introduced it does not immediately return the return
value of qcom_glink_tx().
The result is that in the intentless case (i.e. intent == NULL), the
code will continue to send all additional chunks. This is wasteful, and
it's possible that the send operation could incorrectly indicate
success, if the last chunk fits in the TX fifo.
Fix the condition.
Fixes: 8956927faed3 ("rpmsg: glink: Add TX_DATA_CONT command while sending")
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230418163018.785524-2-quic_bjorande@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dhruva Gole <d-gole@ti.com>
Date: Thu Mar 23 14:29:04 2023 +0530
rtc: k3: handle errors while enabling wake irq
[ Upstream commit d31d7300ebc0c43021ec48c0e6a3a427386f4617 ]
Due to the potential failure of enable_irq_wake(), it would be better to
return error if it fails.
Fixes: b09d633575e5 ("rtc: Introduce ti-k3-rtc")
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230323085904.957999-1-d-gole@ti.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Mon Mar 20 22:21:42 2023 +0100
rtc: meson-vrtc: Use ktime_get_real_ts64() to get the current time
[ Upstream commit 0e6255fa3f649170da6bd1a544680589cfae1131 ]
The VRTC alarm register can be programmed with an amount of seconds
after which the SoC will be woken up by the VRTC timer again. We are
already converting the alarm time from meson_vrtc_set_alarm() to
"seconds since 1970". This means we also need to use "seconds since
1970" for the current time.
This fixes a problem where setting the alarm to one minute in the future
results in the firmware (which handles wakeup) to output (on the serial
console) that the system will be woken up in billions of seconds.
ktime_get_raw_ts64() returns the time since boot, not since 1970. Switch
to ktime_get_real_ts64() to fix the calculation of the alarm time and to
make the SoC wake up at the specified date/time. Also the firmware
(which manages suspend) now prints either 59 or 60 seconds until wakeup
(depending on how long it takes for the system to enter suspend).
Fixes: 6ef35398e827 ("rtc: Add Amlogic Virtual Wake RTC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20230320212142.2355062-1-martin.blumenstingl@googlemail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sat Mar 11 10:40:21 2023 +0100
rtc: omap: include header for omap_rtc_power_off_program prototype
[ Upstream commit f69c2b5420497b7a54181ce170d682cbeb1f119f ]
Non-static functions should have a prototype:
drivers/rtc/rtc-omap.c:410:5: error: no previous prototype for ‘omap_rtc_power_off_program’ [-Werror=missing-prototypes]
Fixes: 6256f7f7f217 ("rtc: OMAP: Add support for rtc-only mode")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230311094021.79730-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Colin Ian King <colin.i.king@gmail.com>
Date: Mon Apr 24 10:47:30 2023 +0100
rv: Fix addition on an uninitialized variable 'run'
[ Upstream commit 54a0dffa62de0c91b406ff32082a121ccfa0d7f1 ]
The variable run is not initialized however it is being accumulated
by the return value from the call to ikm_run_monitor. Fix this by
initializing run to zero at the start of the function.
Link: https://lkml.kernel.org/r/20230424094730.105313-1-colin.i.king@gmail.com
Fixes: 4bc4b131d44c ("rv: Add rv tool")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marc Dionne <marc.dionne@auristor.com>
Date: Fri Apr 21 17:16:17 2023 +0100
rxrpc: Fix error when reading rxrpc tokens
[ Upstream commit fadfc57cc8047080a123b16f288b7138524fb1e2 ]
When converting from ASSERTCMP to WARN_ON, the tested condition must
be inverted, which was missed for this case.
This would cause an EIO error when trying to read an rxrpc token, for
instance when trying to display tokens with AuriStor's "tokens" command.
Fixes: 84924aac08a4 ("rxrpc: Fix checker warning")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Heiko Carstens <hca@linux.ibm.com>
Date: Thu Mar 30 12:55:46 2023 +0200
s390/checksum: always use cksm instruction
[ Upstream commit e42ac7789df64120d7d3d57433dfc9f37ec0cb99 ]
Commit dfe843dce775 ("s390/checksum: support GENERIC_CSUM, enable it for
KASAN") switched s390 to use the generic checksum functions, so that KASAN
instrumentation also works checksum functions by avoiding architecture
specific inline assemblies.
There is however the problem that the generic csum_partial() function
returns a 32 bit value with a 16 bit folded checksum, while the original
s390 variant does not fold to 16 bit. This in turn causes that the
ipib_checksum in lowcore contains different values depending on kernel
config options.
The ipib_checksum is used by system dumpers to verify if pointers in
lowcore point to valid data. Verification is done by comparing checksum
values. The system dumpers still use 32 bit checksum values which are not
folded, and therefore the checksum verification fails (incorrectly).
Symptom is that reboot after dump does not work anymore when a KASAN
instrumented kernel is dumped.
Fix this by not using the generic checksum implementation. Instead add an
explicit kasan_check_read() so that KASAN knows about the read access from
within the inline assembly.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Fixes: dfe843dce775 ("s390/checksum: support GENERIC_CSUM, enable it for KASAN")
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stefan Haberland <sth@linux.ibm.com>
Date: Wed Apr 5 16:20:17 2023 +0200
s390/dasd: fix hanging blockdevice after request requeue
commit d8898ee50edecacdf0141f26fd90acf43d7e9cd7 upstream.
The DASD driver does not kick the requeue list when requeuing IO requests
to the blocklayer. This might lead to hanging blockdevice when there is
no other trigger for this.
Fix by automatically kick the requeue list when requeuing DASD requests
to the blocklayer.
Fixes: e443343e509a ("s390/dasd: blk-mq conversion")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Libo Chen <libo.chen@oracle.com>
Date: Wed Aug 10 15:33:13 2022 -0700
sched/fair: Fix inaccurate tally of ttwu_move_affine
[ Upstream commit 39afe5d6fc59237ff7738bf3ede5a8856822d59d ]
There are scenarios where non-affine wakeups are incorrectly counted as
affine wakeups by schedstats.
When wake_affine_idle() returns prev_cpu which doesn't equal to
nr_cpumask_bits, it will slip through the check: target == nr_cpumask_bits
in wake_affine() and be counted as if target == this_cpu in schedstats.
Replace target == nr_cpumask_bits with target != this_cpu to make sure
affine wakeups are accurately tallied.
Fixes: 806486c377e33 (sched/fair: Do not migrate if the prev_cpu is idle)
Suggested-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20220810223313.386614-1-libo.chen@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Schspa Shi <schspa@gmail.com>
Date: Mon Aug 29 01:03:02 2022 +0800
sched/rt: Fix bad task migration for rt tasks
[ Upstream commit feffe5bb274dd3442080ef0e4053746091878799 ]
Commit 95158a89dd50 ("sched,rt: Use the full cpumask for balancing")
allows find_lock_lowest_rq() to pick a task with migration disabled.
The purpose of the commit is to push the current running task on the
CPU that has the migrate_disable() task away.
However, there is a race which allows a migrate_disable() task to be
migrated. Consider:
CPU0 CPU1
push_rt_task
check is_migration_disabled(next_task)
task not running and
migration_disabled == 0
find_lock_lowest_rq(next_task, rq);
_double_lock_balance(this_rq, busiest);
raw_spin_rq_unlock(this_rq);
double_rq_lock(this_rq, busiest);
<<wait for busiest rq>>
<wakeup>
task become running
migrate_disable();
<context out>
deactivate_task(rq, next_task, 0);
set_task_cpu(next_task, lowest_rq->cpu);
WARN_ON_ONCE(is_migration_disabled(p));
Fixes: 95158a89dd50 ("sched,rt: Use the full cpumask for balancing")
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Dwaine Gonyier <dgonyier@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Date: Mon Mar 13 12:32:11 2023 +0100
scm: fix MSG_CTRUNC setting condition for SO_PASSSEC
[ Upstream commit a02d83f9947d8f71904eda4de046630c3eb6802c ]
Currently, kernel would set MSG_CTRUNC flag if msg_control buffer
wasn't provided and SO_PASSCRED was set or if there was pending SCM_RIGHTS.
For some reason we have no corresponding check for SO_PASSSEC.
In the recvmsg(2) doc we have:
MSG_CTRUNC
indicates that some control data was discarded due to lack
of space in the buffer for ancillary data.
So, we need to set MSG_CTRUNC flag for all types of SCM.
This change can break applications those don't check MSG_CTRUNC flag.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
v2:
- commit message was rewritten according to Eric's suggestion
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu Mar 23 15:52:45 2023 -0700
scripts/gdb: bail early if there are no clocks
[ Upstream commit 1d7adbc74c009057ed9dc3112f388e91a9c79acc ]
Avoid generating an exception if there are no clocks registered:
(gdb) lx-clk-summary
enable prepare protect
clock count count count rate
------------------------------------------------------------------------
Python Exception <class 'gdb.error'>: No symbol "clk_root_list" in
current context.
Error occurred in Python: No symbol "clk_root_list" in current context.
Link: https://lkml.kernel.org/r/20230323225246.3302977-1-f.fainelli@gmail.com
Fixes: d1e9710b63d8 ("scripts/gdb: initial clk support: lx-clk-summary")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu Mar 23 16:16:57 2023 -0700
scripts/gdb: bail early if there are no generic PD
[ Upstream commit f19c3c2959e465209ade1a7a699e6cbf4359ce78 ]
Avoid generating an exception if there are no generic power domain(s)
registered:
(gdb) lx-genpd-summary
domain status children
/device runtime status
----------------------------------------------------------------------
Python Exception <class 'gdb.error'>: No symbol "gpd_list" in current context.
Error occurred in Python: No symbol "gpd_list" in current context.
(gdb) quit
[f.fainelli@gmail.com: correctly invoke gdb_eval_or_none]
Link: https://lkml.kernel.org/r/20230327185746.3856407-1-f.fainelli@gmail.com
Link: https://lkml.kernel.org/r/20230323231659.3319941-1-f.fainelli@gmail.com
Fixes: 8207d4a88e1e ("scripts/gdb: add lx-genpd-summary command")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peng Liu <liupeng17@lenovo.com>
Date: Tue Mar 21 14:19:29 2023 +0800
scripts/gdb: fix lx-timerlist for Python3
commit 7362042f3556528e9e9b1eb5ce8d7a3a6331476b upstream.
Below incompatibilities between Python2 and Python3 made lx-timerlist fail
to run under Python3.
o xrange() is replaced by range() in Python3
o bytes and str are different types in Python3
o the return value of Inferior.read_memory() is memoryview object in
Python3
akpm: cc stable so that older kernels are properly debuggable under newer
Python.
Link: https://lkml.kernel.org/r/TYCP286MB2146EE1180A4D5176CBA8AB2C6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu Apr 6 14:52:51 2023 -0700
scripts/gdb: raise error with reduced debugging information
[ Upstream commit 8af055ae25bff48f57227f5e3d48a4306f3dd1c4 ]
If CONFIG_DEBUG_INFO_REDUCED is enabled in the kernel configuration, we
will typically not be able to load vmlinux-gdb.py and will fail with:
Traceback (most recent call last):
File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/vmlinux-gdb.py", line 25, in <module>
import linux.utils
File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/scripts/gdb/linux/utils.py", line 131, in <module>
atomic_long_counter_offset = atomic_long_type.get_type()['counter'].bitpos
KeyError: 'counter'
Rather be left wondering what is happening only to find out that reduced
debug information is the cause, raise an eror. This was not typically a
problem until e3c8d33e0d62 ("scripts/gdb: fix 'lx-dmesg' on 32 bits arch")
but it has since then.
Link: https://lkml.kernel.org/r/20230406215252.1580538-1-f.fainelli@gmail.com
Fixes: e3c8d33e0d62 ("scripts/gdb: fix 'lx-dmesg' on 32 bits arch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xingui Yang <yangxingui@huawei.com>
Date: Mon Mar 20 11:34:23 2023 +0800
scsi: hisi_sas: Handle NCQ error when IPTT is valid
[ Upstream commit bb544224da77b96b2c11a13872bf91ede1e015be ]
If an NCQ error occurs when the IPTT is valid and slot->abort flag is set
in completion path, sas_task_abort() will be called to abort only one NCQ
command now, and the host would be set to SHOST_RECOVERY state. But this
may not kick-off EH Immediately until other outstanding QCs timeouts. As a
result, the host may remain in the SHOST_RECOVERY state for up to 30
seconds, such as follows:
[7972317.645234] hisi_sas_v3_hw 0000:74:04.0: erroneous completion iptt=3264 task=00000000466116b8 dev id=2 sas_addr=0x5000000000000502 CQ hdr: 0x1883 0x20cc0 0x40000 0x20420000 Error info: 0x0 0x0 0x200000 0x0
[7972341.508264] sas: Enter sas_scsi_recover_host busy: 32 failed: 32
[7972341.984731] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 32 tries: 1
All NCQ commands that are in the queue should be aborted when an NCQ error
occurs in this scenario.
Fixes: 05d91b557af9 ("scsi: hisi_sas: Directly trigger SCSI error handling for completion errors")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1679283265-115066-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shuchang Li <lishuchang@hust.edu.cn>
Date: Tue Apr 4 15:21:32 2023 +0800
scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup()
[ Upstream commit 91a0c0c1413239d0548b5aac4c82f38f6d53a91e ]
When if_type equals zero and pci_resource_start(pdev, PCI_64BIT_BAR4)
returns false, drbl_regs_memmap_p is not remapped. This passes a NULL
pointer to iounmap(), which can trigger a WARN() on certain arches.
When if_type equals six and pci_resource_start(pdev, PCI_64BIT_BAR4)
returns true, drbl_regs_memmap_p may has been remapped and
ctrl_regs_memmap_p is not remapped. This is a resource leak and passes a
NULL pointer to iounmap().
To fix these issues, we need to add null checks before iounmap(), and
change some goto labels.
Fixes: 1351e69fc6db ("scsi: lpfc: Add push-to-adapter support to sli4")
Signed-off-by: Shuchang Li <lishuchang@hust.edu.cn>
Link: https://lore.kernel.org/r/20230404072133.1022-1-lishuchang@hust.edu.cn
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Danila Chernetsov <listdansp@mail.ru>
Date: Fri Mar 17 17:51:09 2023 +0000
scsi: megaraid: Fix mega_cmd_done() CMDID_INT_CMDS
[ Upstream commit 75cb113cd43f06aaf4f1bda0069cfd5b98e909eb ]
When cmdid == CMDID_INT_CMDS, the 'cmds' pointer is NULL but is
dereferenced below.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0f2bb84d2a68 ("[SCSI] megaraid: simplify internal command handling")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Link: https://lore.kernel.org/r/20230317175109.18585-1-listdansp@mail.ru
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ranjan Kumar <ranjan.kumar@broadcom.com>
Date: Fri Mar 31 17:53:17 2023 +0530
scsi: mpi3mr: Handle soft reset in progress fault code (0xF002)
[ Upstream commit a3d27dfdcfc27ac3f46de5391bb6d24f04af7941 ]
The driver is exiting from the fault watchdog thread if it sees the 0xF002
(Soft reset in progress) fault code.
If the driver initiates the soft reset, then the driver restarts the
watchdog at the end of the soft reset completion. However, if the soft
reset is initiated by the firmware asynchronously, then the driver will
never restart the watchdog and never re-initialize the controller after the
asynchronous soft reset completion.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20230331122317.11391-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Christie <michael.christie@oracle.com>
Date: Sat Mar 18 20:56:18 2023 -0500
scsi: target: Fix multiple LUN_RESET handling
[ Upstream commit 673db054d7a2b5a470d7a25baf65956d005ad729 ]
This fixes a bug where an initiator thinks a LUN_RESET has cleaned up
running commands when it hasn't. The bug was added in commit 51ec502a3266
("target: Delete tmr from list before processing").
The problem occurs when:
1. We have N I/O cmds running in the target layer spread over 2 sessions.
2. The initiator sends a LUN_RESET for each session.
3. session1's LUN_RESET loops over all the running commands from both
sessions and moves them to its local drain_task_list.
4. session2's LUN_RESET does not see the LUN_RESET from session1 because
the commit above has it remove itself. session2 also does not see any
commands since the other reset moved them off the state lists.
5. sessions2's LUN_RESET will then complete with a successful response.
6. sessions2's inititor believes the running commands on its session are
now cleaned up due to the successful response and cleans up the running
commands from its side. It then restarts them.
7. The commands do eventually complete on the backend and the target
starts to return aborted task statuses for them. The initiator will
either throw a invalid ITT error or might accidentally lookup a new
task if the ITT has been reallocated already.
Fix the bug by reverting the patch, and serialize the execution of
LUN_RESETs and Preempt and Aborts.
Also prevent us from waiting on LUN_RESETs in core_tmr_drain_tmr_list,
because it turns out the original patch fixed a bug that was not
mentioned. For LUN_RESET1 core_tmr_drain_tmr_list can see a second
LUN_RESET and wait on it. Then the second reset will run
core_tmr_drain_tmr_list and see the first reset and wait on it resulting in
a deadlock.
Fixes: 51ec502a3266 ("target: Delete tmr from list before processing")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-8-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Christie <michael.christie@oracle.com>
Date: Sat Mar 18 20:56:19 2023 -0500
scsi: target: iscsit: Fix TAS handling during conn cleanup
[ Upstream commit cc79da306ebb2edb700c3816b90219223182ac3c ]
Fix a bug added in commit f36199355c64 ("scsi: target: iscsi: Fix cmd abort
fabric stop race").
If CMD_T_TAS is set on the se_cmd we must call iscsit_free_cmd() to do the
last put on the cmd and free it, because the connection is down and we will
not up sending the response and doing the put from the normal I/O
path.
Add a check for CMD_T_TAS in iscsit_release_commands_from_conn() so we now
detect this case and run iscsit_free_cmd().
Fixes: f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-9-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Christie <michael.christie@oracle.com>
Date: Sat Mar 18 20:56:15 2023 -0500
scsi: target: iscsit: isert: Alloc per conn cmd counter
[ Upstream commit 6d256bee602b131bd4fbc92863b6a1210bcf6325 ]
This has iscsit allocate a per conn cmd counter and converts iscsit/isert
to use it instead of the per session one.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-5-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 395cee83d02d ("scsi: target: iscsit: Stop/wait on cmds during conn close")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Christie <michael.christie@oracle.com>
Date: Sat Mar 18 20:56:16 2023 -0500
scsi: target: iscsit: Stop/wait on cmds during conn close
[ Upstream commit 395cee83d02de3073211b04fc85724f4abc663ad ]
This fixes a bug added in commit f36199355c64 ("scsi: target: iscsi: Fix
cmd abort fabric stop race").
If we have multiple sessions to the same se_device we can hit a race where
a LUN_RESET on one session cleans up the se_cmds from under another
session which is being closed. This results in the closing session freeing
its conn/session structs while they are still in use.
The bug is:
1. Session1 has IO se_cmd1.
2. Session2 can also have se_cmds for I/O and optionally TMRs for ABORTS
but then gets a LUN_RESET.
3. The LUN_RESET on session2 sees the se_cmds on session1 and during the
drain stages marks them all with CMD_T_ABORTED.
4. session1 is now closed so iscsit_release_commands_from_conn() only sees
se_cmds with the CMD_T_ABORTED bit set and returns immediately even
though we have outstanding commands.
5. session1's connection and session are freed.
6. The backend request for se_cmd1 completes and it accesses the freed
connection/session.
This hooks the iscsit layer into the cmd counter code, so we can wait for
all outstanding se_cmds before freeing the connection.
Fixes: f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-6-michael.christie@oracle.com
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Christie <michael.christie@oracle.com>
Date: Sat Mar 18 20:56:13 2023 -0500
scsi: target: Move cmd counter allocation
[ Upstream commit 4edba7e4a8f39112398d3cda94128a8e13a7d527 ]
iSCSI needs to allocate its cmd counter per connection for MCS support
where we need to stop and wait on commands running on a connection instead
of per session. This moves the cmd counter allocation to
target_setup_session() which is used by drivers that need the stop+wait
behavior per session.
xcopy doesn't need stop+wait at all, so we will be OK moving the cmd
counter allocation outside of transport_init_session().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-3-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 395cee83d02d ("scsi: target: iscsit: Stop/wait on cmds during conn close")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Christie <michael.christie@oracle.com>
Date: Sat Mar 18 20:56:12 2023 -0500
scsi: target: Move sess cmd counter to new struct
[ Upstream commit becd9be6069e7b183c084f460f0eb363e43cc487 ]
iSCSI needs to wait on outstanding commands like how SRP and the FC/FCoE
drivers do. It can't use target_stop_session() because for MCS support we
can't stop the entire session during recovery because if other connections
are OK then we want to be able to continue to execute I/O on them.
Move the per session cmd counters to a new struct so iSCSI can allocate
them per connection. The xcopy code can also just not allocate in the
future since it doesn't need to track commands.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-2-michael.christie@oracle.com
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 395cee83d02d ("scsi: target: iscsit: Stop/wait on cmds during conn close")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Christie <michael.christie@oracle.com>
Date: Sat Mar 18 20:56:14 2023 -0500
scsi: target: Pass in cmd counter to use during cmd setup
[ Upstream commit 8e288be8606ad87c1726618eacfb8fbd3ab4b806 ]
Allow target_get_sess_cmd() users to pass in the cmd counter they want to
use. Right now we pass in the session's cmd counter but in a subsequent
commit iSCSI will switch from per session to per conn.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-4-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 395cee83d02d ("scsi: target: iscsit: Stop/wait on cmds during conn close")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anh Tuan Phan <tuananhlfc@gmail.com>
Date: Fri Mar 24 09:14:15 2023 +0700
selftests mount: Fix mount_setattr_test builds failed
[ Upstream commit f1594bc676579133a3cd906d7d27733289edfb86 ]
When compiling selftests with target mount_setattr I encountered some errors with the below messages:
mount_setattr_test.c: In function ‘mount_setattr_thread’:
mount_setattr_test.c:343:16: error: variable ‘attr’ has initializer but incomplete type
343 | struct mount_attr attr = {
| ^~~~~~~~~~
These errors might be because of linux/mount.h is not included. This patch resolves that issue.
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin KaFai Lau <martin.lau@kernel.org>
Date: Wed Mar 15 17:07:26 2023 -0700
selftests/bpf: Fix a fd leak in an error path in network_helpers.c
[ Upstream commit 226efec2b0efad60d4a6c4b2c3a8710dafc4dc21 ]
In __start_server, it leaks a fd when setsockopt(SO_REUSEPORT) fails.
This patch fixes it.
Fixes: eed92afdd14c ("bpf: selftest: Test batching and bpf_(get|set)sockopt in bpf tcp iter")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230316000726.1016773-2-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Song Liu <song@kernel.org>
Date: Wed Apr 12 14:04:22 2023 -0700
selftests/bpf: Fix leaked bpf_link in get_stackid_cannot_attach
[ Upstream commit c1e07a80cf23d3a6e96172bc9a73bfa912a9fcbc ]
skel->links.oncpu is leaked in one case. This causes test perf_branches
fails when it runs after get_stackid_cannot_attach:
./test_progs -t get_stackid_cannot_attach,perf_branches
84 get_stackid_cannot_attach:OK
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:FAIL:output not valid no valid sample from prog
146/1 perf_branches/perf_branches_hw:FAIL
146/2 perf_branches/perf_branches_no_hw:OK
146 perf_branches:FAIL
All error logs:
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:FAIL:output not valid no valid sample from prog
146/1 perf_branches/perf_branches_hw:FAIL
146 perf_branches:FAIL
Summary: 1/1 PASSED, 0 SKIPPED, 1 FAILED
Fix this by adding the missing bpf_link__destroy().
Fixes: 346938e9380c ("selftests/bpf: Add get_stackid_cannot_attach")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230412210423.900851-3-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Song Liu <song@kernel.org>
Date: Wed Apr 12 14:04:21 2023 -0700
selftests/bpf: Use read_perf_max_sample_freq() in perf_event_stackmap
[ Upstream commit de6d014a09bf12a9a8959d60c0a1d4a41d394a89 ]
Currently, perf_event sample period in perf_event_stackmap is set too low
that the test fails randomly. Fix this by using the max sample frequency,
from read_perf_max_sample_freq().
Move read_perf_max_sample_freq() to testing_helpers.c. Replace the CHECK()
with if-printf, as CHECK is not available in testing_helpers.c.
Fixes: 1da4864c2b20 ("selftests/bpf: Add callchain_stackid")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230412210423.900851-2-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: YiFei Zhu <zhuyifei@google.com>
Date: Wed Apr 5 19:33:54 2023 +0000
selftests/bpf: Wait for receive in cg_storage_multi test
[ Upstream commit 5af607a861d43ffff830fc1890033e579ec44799 ]
In some cases the loopback latency might be large enough, causing
the assertion on invocations to be run before ingress prog getting
executed. The assertion would fail and the test would flake.
This can be reliably reproduced by arbitrarily increasing the
loopback latency (thanks to [1]):
tc qdisc add dev lo root handle 1: htb default 12
tc class add dev lo parent 1:1 classid 1:12 htb rate 20kbps ceil 20kbps
tc qdisc add dev lo parent 1:12 netem delay 100ms
Fix this by waiting on the receive end, instead of instantly
returning to the assert. The call to read() will wait for the
default SO_RCVTIMEO timeout of 3 seconds provided by
start_server().
[1] https://gist.github.com/kstevens715/4598301
Reported-by: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/bpf/9c5c8b7e-1d89-a3af-5400-14fde81f4429@linux.dev/
Fixes: 3573f384014f ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress")
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Link: https://lore.kernel.org/r/20230405193354.1956209-1-zhuyifei@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kajol Jain <kjain@linux.ibm.com>
Date: Wed Mar 1 22:39:17 2023 +0530
selftests/powerpc/pmu: Fix sample field check in the mmcra_thresh_marked_sample_test
[ Upstream commit 8a32341cf04ba05974931b4664683c2c9fb84e56 ]
The testcase verifies the setting of different fields in Monitor Mode
Control Register A (MMCRA). In the current code, EV_CODE_EXTRACT macro
is used to extract the "sample" field, which then needs to be further
processed to fetch rand_samp_elig and rand_samp_mode bits. But the
current code is not passing valid sample field to EV_CODE_EXTRACT
macro. Patch addresses this by fixing the input for EV_CODE_EXTRACT.
Fixes: 29cf373c5766 ("selftests/powerpc/pmu: Add interface test for mmcra register fields")
Reported-by: David Binderman <dcb314@hotmail.com>
Link: https://lore.kernel.org/r/DB6P189MB0568CF002762C6C43AF6DF169CA89@DB6P189MB0568.EURP189.PROD.OUTLOOK.COM
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230301170918.69176-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Wed Feb 15 15:05:59 2023 +0200
selftests/resctrl: Allow ->setup() to return errors
[ Upstream commit fa10366cc6f4cc862871f8938426d85c2481f084 ]
resctrl_val() assumes ->setup() always returns either 0 to continue
tests or < 0 in case of the normal termination of tests after x runs.
The latter overlaps with normal error returns.
Define END_OF_TESTS (=1) to differentiate the normal termination of
tests and return errors as negative values. Alter callers of ->setup()
to handle errors properly.
Fixes: 790bf585b0ee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Wed Feb 15 15:06:00 2023 +0200
selftests/resctrl: Check for return value after write_schemata()
[ Upstream commit 0d45c83b95da414e98ad333e723141a94f6e2c64 ]
MBA test case writes schemata but it does not check if the write is
successful or not.
Add the error check and return error properly.
Fixes: 01fee6b4d1f9 ("selftests/resctrl: Add MBA test")
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Wed Feb 15 15:05:58 2023 +0200
selftests/resctrl: Move ->setup() call outside of test specific branches
[ Upstream commit c90b3b588e369c20087699316259fa5ebbb16f2d ]
resctrl_val() function is called only by MBM, MBA, and CMT tests which
means the else branch is never used.
Both test branches call param->setup().
Remove the unused else branch and place the ->setup() call outside of
the test specific branches reducing code duplication.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: fa10366cc6f4 ("selftests/resctrl: Allow ->setup() to return errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Wed Feb 15 15:05:57 2023 +0200
selftests/resctrl: Return NULL if malloc_and_init_memory() did not alloc mem
[ Upstream commit 22a8be280383812235131dda18a8212a59fadd2d ]
malloc_and_init_memory() in fill_buf isn't checking if memalign()
successfully allocated memory or not before accessing the memory.
Check the return value of memalign() and return NULL if allocating
aligned memory fails.
Fixes: a2561b12fe39 ("selftests/resctrl: Add built in benchmark")
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kal Conley <kal.conley@dectris.com>
Date: Mon Apr 3 14:03:59 2023 +0200
selftests: xsk: Deflakify STATS_RX_DROPPED test
[ Upstream commit 68e7322142f5e731af222892d384d311835db0f1 ]
Fix flaky STATS_RX_DROPPED test. The receiver calls getsockopt after
receiving the last (valid) packet which is not the final packet sent in
the test (valid and invalid packets are sent in alternating fashion with
the final packet being invalid). Since the last packet may or may not
have been dropped already, both outcomes must be allowed.
This issue could also be fixed by making sure the last packet sent is
valid. This alternative is left as an exercise to the reader (or the
benevolent maintainers of this file).
This problem was quite visible on certain setups. On one machine this
failure was observed 50% of the time.
Also, remove a redundant assignment of pkt_stream->nb_pkts. This field
is already initialized by __pkt_stream_alloc.
Fixes: 27e934bec35b ("selftests: xsk: make stat tests not spin on getsockopt")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403120400.31018-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kal Conley <kal.conley@dectris.com>
Date: Wed Apr 5 10:29:04 2023 +0200
selftests: xsk: Disable IPv6 on VETH1
[ Upstream commit f2b50f17268390567bc0e95642170d88f336c8f4 ]
This change fixes flakiness in the BIDIRECTIONAL test:
# [is_pkt_valid] expected length [60], got length [90]
not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL
When IPv6 is enabled, the interface will periodically send MLDv1 and
MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail
since it uses VETH0 for RX.
For other tests, this was not a problem since they only receive on VETH1
and IPv6 was already disabled on VETH0.
Fixes: a89052572ebb ("selftests/bpf: Xsk selftests framework")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405082905.6303-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kal Conley <kal.conley@dectris.com>
Date: Mon Apr 3 16:50:46 2023 +0200
selftests: xsk: Use correct UMEM size in testapp_invalid_desc
[ Upstream commit 7a2050df244e2c9a4e90882052b7907450ad10ed ]
Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when
the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the
macro since it's no longer being used.
Fixes: 909f0e28207c ("selftests: xsk: Add tests for 2K frame size")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403145047.33065-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Paul Moore <paul@paul-moore.com>
Date: Wed Apr 12 13:29:11 2023 -0400
selinux: ensure av_permissions.h is built when needed
[ Upstream commit 4ce1f694eb5d8ca607fed8542d32a33b4f1217a5 ]
The Makefile rule responsible for building flask.h and
av_permissions.h only lists flask.h as a target which means that
av_permissions.h is only generated when flask.h needs to be
generated. This patch fixes this by adding av_permissions.h as a
target to the rule.
Fixes: 8753f6bec352 ("selinux: generate flask headers during kernel build")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ondrej Mosnacek <omosnace@redhat.com>
Date: Wed Apr 12 15:59:19 2023 +0200
selinux: fix Makefile dependencies of flask.h
[ Upstream commit bcab1adeaad4b39a1e04cb98979a367d08253f03 ]
Make the flask.h target depend on the genheaders binary instead of
classmap.h to ensure that it is rebuilt if any of the dependencies of
genheaders are changed.
Notably this fixes flask.h not being rebuilt when
initial_sid_to_string.h is modified.
Fixes: 8753f6bec352 ("selinux: generate flask headers during kernel build")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Fainelli <f.fainelli@gmail.com>
Date: Fri Apr 14 10:02:39 2023 -0700
serial: 8250: Add missing wakeup event reporting
[ Upstream commit 0ba9e3a13c6adfa99e32b2576d20820ab10ad48a ]
An 8250 UART configured as a wake-up source would not have reported
itself through sysfs as being the source of wake-up, correct that.
Fixes: b3b708fa2780 ("wake up from a serial port")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230414170241.2016255-1-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Fri Mar 17 13:33:18 2023 +0200
serial: 8250: Fix serial8250_tx_empty() race with DMA Tx
commit 146a37e05d620cef4ad430e5d1c9c077fe6fa76f upstream.
There's a potential race before THRE/TEMT deasserts when DMA Tx is
starting up (or the next batch of continuous Tx is being submitted).
This can lead to misdetecting Tx empty condition.
It is entirely normal for THRE/TEMT to be set for some time after the
DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely
not empty at that point, it seems incorrect for serial8250_tx_empty()
claim Tx is empty.
Fix the race by also checking in serial8250_tx_empty() whether there's
DMA Tx active.
Note: This fix only addresses in-kernel race mainly to make using
TCSADRAIN/FLUSH robust. Userspace can still cause other races but they
seem userspace concurrency control problems.
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Doug Berger <opendmb@gmail.com>
Date: Thu Mar 9 11:02:24 2023 -0800
serial: 8250_bcm7271: Fix arbitration handling
[ Upstream commit 15ac1122fd6d4bf408a03e6f23c7ad4f60b22f9e ]
The arbitration of the UART DMA is mishandled for a few
exceptional cases when probing and releasing the driver.
It is possible that the DMA register spaces are not defined in
device tree for an instance of the driver, so attempts to access
the registers in brcmuart_arbitration() would use NULL pointers.
It is also possible for the probe function to return an error
while still holding the UART DMA. This would prevent the UART
DMA from being claimed by an instance that could use it.
These errors are addressed by only releasing the UART DMA if it
is held by this instance (i.e. priv->dma_enabled == 1) and
directing early error paths in probe to this common release_dma
handling.
Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230309190224.687380-1-opendmb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johan Hovold <johan@kernel.org>
Date: Wed Apr 12 14:48:11 2023 +0200
serial: fix TIOCSRS485 locking
commit 9e4f2a8004213339e9d837d891a59cc80e082966 upstream.
The RS485 multipoint addressing support for some reason added a new
ADDRB termios cflag which is (only!) updated from one of the RS485
ioctls.
Make sure to take the termios rw semaphore for the right ioctl (i.e.
set, not get).
Fixes: ae50bb275283 ("serial: take termios_rwsem for ->rs485_config() & pass termios as param")
Cc: stable@vger.kernel.org # 6.0
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20230412124811.11217-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jan Kundrát <jan.kundrat@cesnet.cz>
Date: Wed Apr 5 22:14:23 2023 +0200
serial: max310x: fix IO data corruption in batched operations
commit 3f42b142ea1171967e40e10e4b0241c0d6d28d41 upstream.
After upgrading from 5.16 to 6.1, our board with a MAX14830 started
producing lots of garbage data over UART. Bisection pointed out commit
285e76fc049c as the culprit. That patch tried to replace hand-written
code which I added in 2b4bac48c1084 ("serial: max310x: Use batched reads
when reasonably safe") with the generic regmap infrastructure for
batched operations.
Unfortunately, the `regmap_raw_read` and `regmap_raw_write` which were
used are actually functions which perform IO over *multiple* registers.
That's not what is needed for accessing these Tx/Rx FIFOs; the
appropriate functions are the `_noinc_` versions, not the `_raw_` ones.
Fix this regression by using `regmap_noinc_read()` and
`regmap_noinc_write()` along with the necessary `regmap_config` setup;
with this patch in place, our board communicates happily again. Since
our board uses SPI for talking to this chip, the I2C part is completely
untested.
Fixes: 285e76fc049c ("serial: max310x: use regmap methods for SPI batch operations")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://lore.kernel.org/r/79db8e82aadb0e174bc82b9996423c3503c8fb37.1680732084.git.jan.kundrat@cesnet.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Marek Vasut <marex@denx.de>
Date: Thu Feb 23 05:22:52 2023 +0100
serial: stm32: Re-assert RTS/DE GPIO in RS485 mode only if more data are transmitted
[ Upstream commit c47527cbcc3c50800f34b8c684f29721f75de246 ]
The stm32_usart_transmit_chars() may be called with empty or stopped
transmit queue, and no XON/OFF character pending. This can happen at
the end of transmission, where this last call is used to either handle
the XON/XOFF x_char, or disable TX interrupt if queue is empty or
stopped.
If that occurs, do not assert the RS485 RTS/DE GPIO anymore, as the
GPIO would remain asserted past the end of transmission and that would
block the RS485 bus after the transmission.
Only assert the RS485 RTS/DE GPIO if there is either pending XON/XOFF
x_char, or at least one character in running transmit queue.
Fixes: d7c76716169d ("serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230223042252.95480-2-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Date: Wed Apr 19 13:48:52 2023 +0200
sh: sq: Fix incorrect element size for allocating bitmap buffer
[ Upstream commit 80f746e2bd0e1da3fdb49a53570e54a1a225faac ]
The Store Queue code allocates a bitmap buffer with the size of
multiple of sizeof(long) in sq_api_init(). While the buffer size
is calculated correctly, the code uses the wrong element size to
allocate the buffer which results in the allocated bitmap buffer
being too small.
Fix this by allocating the buffer with kcalloc() with element size
sizeof(long) instead of kzalloc() whose elements size defaults to
sizeof(char).
Fixes: d7c30c682a27 ("sh: Store Queue API rework.")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230419114854.528677-1-glaubitz@physik.fu-berlin.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bharath SM <bharathsm@microsoft.com>
Date: Thu Apr 20 13:54:33 2023 +0000
SMB3: Add missing locks to protect deferred close file list
[ Upstream commit ab9ddc87a9055c4bebd6524d5d761d605d52e557 ]
cifs_del_deferred_close function has a critical section which modifies
the deferred close file list. We must acquire deferred_lock before
calling cifs_del_deferred_close function.
Fixes: ca08d0eac020 ("cifs: Fix memory leak on the deferred close")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Acked-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bharath SM <bharathsm@microsoft.com>
Date: Wed Apr 26 14:05:16 2023 +0000
SMB3: Close deferred file handles in case of handle lease break
[ Upstream commit d906be3fa571f6fc9381911304a0eca99f1b6951 ]
We should not cache deferred file handles if we dont have
handle lease on a file. And we should immediately close all
deferred handles in case of handle lease break.
Fixes: 9e31678fb403 ("SMB3: fix lease break timeout when multiple deferred close handles for the same file.")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhaoyang Li <lizhaoyang04@hust.edu.cn>
Date: Mon Mar 27 19:54:22 2023 +0800
soc: bcm: brcmstb: biuctrl: fix of_iomap leak
[ Upstream commit c3fbced9af885a6f217fd95509a613d6590916ce ]
Smatch reports:
drivers/soc/bcm/brcmstb/biuctrl.c:291 setup_hifcpubiuctrl_regs() warn:
'cpubiuctrl_base' from of_iomap() not released on lines: 291.
This is because in setup_hifcpubiuctrl_regs(),
cpubiuctrl_base is not released when handle error, which may cause a leak.
To fix this, iounmap is added when handle error.
Fixes: 22f7a9116eba ("soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUs")
Signed-off-by: Zhaoyang Li <lizhaoyang04@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230327115422.1536615-1-lizhaoyang04@hust.edu.cn
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tushar Nimkar <quic_tnimkar@quicinc.com>
Date: Thu Apr 6 17:27:32 2023 +0530
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
[ Upstream commit 88704a0cd71909c3107561261412a5d5beb23358 ]
RSC v3 register offsets are same for all minor versions of v3. Fix a
minor version check to pick correct offsets for all v3 minor versions.
Fixes: 40482e4f7364 ("soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets")
Signed-off-by: Tushar Nimkar <quic_tnimkar@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230406115732.9293-1-quic_tnimkar@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Li Yang <lidaxian@hust.edu.cn>
Date: Fri Mar 31 17:55:44 2023 +0800
soc: renesas: renesas-soc: Release 'chipid' from ioremap()
[ Upstream commit fc187a46a8e682f0f1167b230792b88de01ceaa0 ]
Smatch reports:
drivers/soc/renesas/renesas-soc.c:536 renesas_soc_init() warn:
'chipid' from ioremap() not released on lines: 475.
If soc_dev_atrr allocation is failed, function renesas_soc_init()
will return without releasing 'chipid' from ioremap().
Fix this by adding function iounmap().
Fixes: cb5508e47e60 ("soc: renesas: Add support for reading product revision for RZ/G2L family")
Signed-off-by: Li Yang <lidaxian@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230331095545.31823-1-lidaxian@hust.edu.cn
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nicolas Frayer <nfrayer@baylibre.com>
Date: Fri Dec 30 01:14:04 2022 +0100
soc: ti: k3-ringacc: Add try_module_get() to k3_dmaring_request_dual_ring()
[ Upstream commit 5f1732a8683c1da8faaa90d6ffc3bd6d33013a58 ]
When the k3 ring accelerator driver has been modified to add module build
support, try_module_get() and module_put() have been added to update the
module refcnt. One code path has not been updated and it has introduced
an issue where the refcnt is decremented by module_put() in
k3_ringacc_ring_free() without being incremented previously.
Adding try_module_get() to k3_dmaring_request_dual_ring() ensures the
refcnt is kept up to date.
Fixes: c07f216a8b72 ("soc: ti: k3-ringacc: Allow the driver to be built as module")
Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221230001404.10902-1-nfrayer@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miaoqian Lin <linmq006@gmail.com>
Date: Fri Jan 6 09:40:22 2023 +0400
soc: ti: pm33xx: Fix refcount leak in am33xx_pm_probe
[ Upstream commit 8f3c307b580a4a6425896007325bddefc36e8d91 ]
wkup_m3_ipc_get() takes refcount, which should be freed by
wkup_m3_ipc_put(). Add missing refcount release in the error paths.
Fixes: 5a99ae0092fe ("soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230106054022.947529-1-linmq006@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Date: Tue Mar 21 10:26:42 2023 +0800
soundwire: intel: don't save hw_params for use in prepare
[ Upstream commit 0a0d1740bd8fd7dafb81fcb102fb5d0b83b1ce73 ]
The existing code copies the hw_params pointer and reuses it later in
.prepare, specifically to re-initialize the ALH DMA channel
information that's lost in suspend-resume cycles.
This is not needed, we can directly access the information from the
substream/rtd - as done for the HDAudio DAIs in
sound/soc/sof/intel/hda-dai.c
In addition, using the saved pointer causes the suspend-resume test
cases to fail on specific platforms, depending on which version of GCC
is used. Péter Ujfalusi and I have spent long hours to root-cause this
problem that was reported by the Intel CI first with 6.2-rc1 and again
v6.3-rc1. In the latter case we were lucky that the problem was 100%
reproducible on local test devices, and found out that adding a
dev_dbg() or adding a call to usleep_range() just before accessing the
saved pointer "fixed" the issue. With errors appearing just by
changing the compiler version or minor changes in the code generated,
clearly we have a memory management Heisenbug.
The root-cause seems to be that the hw_params pointer is not
persistent. The soc-pcm code allocates the hw_params structure on the
stack, and passes it to the BE dailink hw_params and DAIs
hw_params. Saving such a pointer and reusing it later during the
.prepare stage cannot possibly work reliably, it's broken-by-design
since v5.10. It's astonishing that the problem was not seen earlier.
This simple fix will have to be back-ported to -stable, due to changes
to avoid the use of the get/set_dmadata routines this patch will only
apply on kernels older than v6.1.
Fixes: a5a0239c27fe ("soundwire: intel: reinitialize IP+DSP in .prepare(), but only when resuming")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230321022642.1426611-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Wed Feb 22 15:03:43 2023 +0100
soundwire: qcom: correct setting ignore bit on v1.5.1
commit bd934f77eeac377e81ddac8673803e7334b82d3d upstream.
According to the comment and to downstream sources, the
SWRM_CONTINUE_EXEC_ON_CMD_IGNORE in SWRM_CMD_FIFO_CFG_ADDR register
should be set for v1.5.1 and newer, so fix the >= operator.
Fixes: 542d3491cdd7 ("soundwire: qcom: set continue execution flag for ignored commands")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230222140343.188691-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Fri Mar 17 09:42:30 2023 +0100
spi: atmel-quadspi: Don't leak clk enable count in pm resume
[ Upstream commit c18bbac353ffed50be134b0a2a059a2bd540c503 ]
The pm resume call is supposed to enable two clocks. If the second enable
fails the callback reports failure but doesn't undo the first enable.
So call clk_disable() for the first clock when clk_enable() for the second
one fails.
Fixes: 4a2f83b7f780 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20230317084232.142257-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Fri Mar 17 09:42:31 2023 +0100
spi: atmel-quadspi: Free resources even if runtime resume failed in .remove()
[ Upstream commit 9448bc1dee65f86c0fe64d9dea8b410af0586886 ]
An early error exit in atmel_qspi_remove() doesn't prevent the device
unbind. So this results in an spi controller with an unbound parent
and unmapped register space (because devm_ioremap_resource() is undone).
So using the remaining spi controller probably results in an oops.
Instead unregister the controller unconditionally and only skip hardware
access and clk disable.
Also add a warning about resume failing and return zero unconditionally.
The latter has the only effect to suppress a less helpful error message by
the spi core.
Fixes: 4a2f83b7f780 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20230317084232.142257-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dhruva Gole <d-gole@ti.com>
Date: Mon Apr 17 14:40:27 2023 +0530
spi: cadence-quadspi: fix suspend-resume implementations
[ Upstream commit 2087e85bb66ee3652dafe732bb9b9b896229eafc ]
The cadence QSPI driver misbehaves after performing a full system suspend
resume:
...
spi-nor spi0.0: resume() failed
...
This results in a flash connected via OSPI interface after system suspend-
resume to be unusable.
fix these suspend and resume functions.
Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230417091027.966146-3-d-gole@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dhruva Gole <d-gole@ti.com>
Date: Thu Apr 20 11:12:57 2023 +0530
spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
[ Upstream commit be3206e8906e7a93df673ab2e96d69304a008edc ]
Using this macro makes the code more readable.
It also inits the members of dev_pm_ops in the following manner
without us explicitly needing to:
.suspend = cqspi_suspend, \
.resume = cqspi_resume, \
.freeze = cqspi_suspend, \
.thaw = cqspi_resume, \
.poweroff = cqspi_suspend, \
.restore = cqspi_resume
Also get rid of conditional compilation based on CONFIG_PM_SLEEP because
it introduces build issues with certain configs when CQSPI_DEV_PM_OPS is
just NULL.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304191900.2fARFQW9-lkp@intel.com/
Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230420054257.925092-1-d-gole@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Date: Wed Mar 22 11:31:01 2023 +0900
spi: f_ospi: Add missing spi_mem_default_supports_op() helper
[ Upstream commit bc43c5ec1a97772269785d19f62d32c91ac5fc36 ]
The .supports_op() callback function returns true by default after
performing driver-specific checks. Therefore the driver cannot apply
the buswidth in devicetree.
Call spi_mem_default_supports_op() helper to handle the buswidth
in devicetree.
Fixes: 1b74dd64c861 ("spi: Add Socionext F_OSPI SPI flash controller driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230322023101.24490-1-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe Leroy <christophe.leroy@csgroup.eu>
Date: Sat Apr 1 19:59:46 2023 +0200
spi: fsl-spi: Fix CPM/QE mode Litte Endian
[ Upstream commit c20c57d9868d7f9fd1b2904c7801b07e128f6322 ]
CPM has the same problem as QE so for CPM also use the fix added
by commit 0398fb70940e ("spi/spi_mpc8xxx: Fix QE mode Litte Endian"):
CPM mode uses Little Endian so words > 8 bits are byte swapped.
Workaround this by always enforcing wordsize 8 for 16 and 32 bits
words. Unfortunately this will not work for LSB transfers
where wordsize is > 8 bits so disable these for now.
Also limit the workaround to 16 and 32 bits words because it can
only work for multiples of 8-bits.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Fixes: 0398fb70940e ("spi/spi_mpc8xxx: Fix QE mode Litte Endian")
Link: https://lore.kernel.org/r/1b7d3e84b1128f42c1887dd2fb9cdf390f541bc1.1680371809.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Mon Mar 6 07:57:32 2023 +0100
spi: imx: Don't skip cleanup in remove's error path
[ Upstream commit 11951c9e3f364d7ae3b568a0e52c8335d43066b5 ]
Returning early in a platform driver's remove callback is wrong. In this
case the dma resources are not released in the error path. this is never
retried later and so this is a permanent leak. To fix this, only skip
hardware disabling if waking the device fails.
Fixes: d593574aff0a ("spi: imx: do not access registers while clocks disabled")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230306065733.2170662-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Date: Tue Apr 4 22:46:11 2023 +0530
spi: mchp-pci1xxxx: Fix length of SPI transactions not set properly in driver
[ Upstream commit 35c8c5e503a82e0a4bf251d32096211eba8c2be6 ]
In pci1xxxx_spi_transfer_one API, length of SPI transaction gets cleared
by setting of length mask. Set length of transaction only after masking
length field.
Fixes: 1cc0cbea7167 ("spi: microchip: pci1xxxx: Add driver for SPI controller of PCI1XXXX PCIe switch")
Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Link: https://lore.kernel.org/r/20230404171613.1336093-2-tharunkumar.pasumarthi@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Date: Tue Apr 4 22:46:12 2023 +0530
spi: mchp-pci1xxxx: Fix SPI transactions not working after suspend and resume
[ Upstream commit 4266d21669de62cf3fb6774f7d404c1eb95a5ab3 ]
pci1xxxx_spi_resume API masks SPI interrupt bit which prohibits interrupt
from coming to the host at the end of the transaction after suspend-resume.
This patch unmasks this bit at resume.
Fixes: 1cc0cbea7167 ("spi: microchip: pci1xxxx: Add driver for SPI controller of PCI1XXXX PCIe switch")
Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Link: https://lore.kernel.org/r/20230404171613.1336093-3-tharunkumar.pasumarthi@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Thu Mar 30 23:03:40 2023 +0200
spi: qup: Don't skip cleanup in remove's error path
[ Upstream commit 61f49171a43ab1f80c73c5c88c508770c461e0f2 ]
Returning early in a platform driver's remove callback is wrong. In this
case the dma resources are not released in the error path. this is never
retried later and so this is a permanent leak. To fix this, only skip
hardware disabling if waking the device fails.
Fixes: 64ff247a978f ("spi: Add Qualcomm QUP SPI controller support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230330210341.2459548-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jishnu Prakash <quic_jprakash@quicinc.com>
Date: Thu Apr 13 15:38:34 2023 -0700
spmi: Add a check for remove callback when removing a SPMI driver
[ Upstream commit b56eef3e16d888883fefab47425036de80dd38fc ]
When removing a SPMI driver, there can be a crash due to NULL pointer
dereference if it does not have a remove callback defined. This is
one such call trace observed when removing the QCOM SPMI PMIC driver:
dump_backtrace.cfi_jt+0x0/0x8
dump_stack_lvl+0xd8/0x16c
panic+0x188/0x498
__cfi_slowpath+0x0/0x214
__cfi_slowpath+0x1dc/0x214
spmi_drv_remove+0x16c/0x1e0
device_release_driver_internal+0x468/0x79c
driver_detach+0x11c/0x1a0
bus_remove_driver+0xc4/0x124
driver_unregister+0x58/0x84
cleanup_module+0x1c/0xc24 [qcom_spmi_pmic]
__do_sys_delete_module+0x3ec/0x53c
__arm64_sys_delete_module+0x18/0x28
el0_svc_common+0xdc/0x294
el0_svc+0x38/0x9c
el0_sync_handler+0x8c/0xf0
el0_sync+0x1b4/0x1c0
If a driver has all its resources allocated through devm_() APIs and
does not need any other explicit cleanup, it would not require a
remove callback to be defined. Hence, add a check for remove callback
presence before calling it when removing a SPMI driver.
Link: https://lore.kernel.org/r/1671601032-18397-2-git-send-email-quic_jprakash@quicinc.com
Fixes: 6f00f8c8635f ("mfd: qcom-spmi-pmic: Use devm_of_platform_populate()")
Fixes: 5a86bf343976 ("spmi: Linux driver framework for SPMI")
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230413223834.4084793-7-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nuno Sá <nuno.sa@analog.com>
Date: Mon Mar 27 16:54:14 2023 +0200
staging: iio: resolver: ads1210: fix config mode
commit 16313403d873ff17a587818b61f84c8cb4971cef upstream.
As stated in the device datasheet [1], bits a0 and a1 have to be set to
1 for the configuration mode.
[1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf
Fixes: b19e9ad5e2cb9 ("staging:iio:resolver:ad2s1210 general driver cleanup")
Cc: stable <stable@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230327145414.1505537-1-nuno.sa@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Date: Tue Apr 18 22:02:01 2023 +0200
staging: rtl8192e: Fix W_DISABLE# does not work after stop/start
[ Upstream commit 3fac2397f562eb669ddc2f45867a253f3fc26184 ]
When loading the driver for rtl8192e, the W_DISABLE# switch is working as
intended. But when the WLAN is turned off in software and then turned on
again the W_DISABLE# does not work anymore. Reason for this is that in
the function _rtl92e_dm_check_rf_ctrl_gpio() the bfirst_after_down is
checked and returned when true. bfirst_after_down is set true when
switching the WLAN off in software. But it is not set to false again
when WLAN is turned on again.
Add bfirst_after_down = false in _rtl92e_sta_up to reset bit and fix
above described bug.
Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20230418200201.GA17398@matrix-ESPRIMO-P710
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dai Ngo <dai.ngo@oracle.com>
Date: Tue Apr 18 13:19:02 2023 -0700
SUNRPC: remove the maximum number of retries in call_bind_status
[ Upstream commit 691d0b782066a6eeeecbfceb7910a8f6184e6105 ]
Currently call_bind_status places a hard limit of 3 to the number of
retries on EACCES error. This limit was done to prevent NLM unlock
requests from being hang forever when the server keeps returning garbage.
However this change causes problem for cases when NLM service takes
longer than 9 seconds to register with the port mapper after a restart.
This patch removes this hard coded limit and let the RPC handles
the retry based on the standard hard/soft task semantics.
Fixes: 0b760113a3a1 ("NLM: Don't hang forever on NLM unlock requests")
Reported-by: Helen Chao <helen.chao@oracle.com>
Tested-by: Helen Chao <helen.chao@oracle.com>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Kelley <mikelley@microsoft.com>
Date: Thu Apr 13 08:37:30 2023 -0700
swiotlb: fix debugfs reporting of reserved memory pools
[ Upstream commit 5499d01c029069044a3b3e50501c77b474c96178 ]
For io_tlb_nslabs, the debugfs code reports the correct value for a
specific reserved memory pool. But for io_tlb_used, the value reported
is always for the default pool, not the specific reserved pool. Fix this.
Fixes: 5c850d31880e ("swiotlb: fix passing local variable to debugfs_create_ulong()")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Doug Berger <opendmb@gmail.com>
Date: Fri Apr 14 14:29:25 2023 -0700
swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup
[ Upstream commit a90922fa25370902322e9de6640e58737d459a50 ]
The reservedmem_of_init_fn's are invoked very early at boot before the
memory zones have even been defined. This makes it inappropriate to test
whether the page corresponding to a PFN is in ZONE_HIGHMEM from within
one.
Removing the check allows an ARM 32-bit kernel with SPARSEMEM enabled to
boot properly since otherwise we would be de-referencing an
uninitialized sparsemem map to perform pfn_to_page() check.
The arm64 architecture happens to work (and also has no high memory) but
other 32-bit architectures could also be having similar issues.
While it would be nice to provide early feedback about a reserved DMA
pool residing in highmem, it is not possible to do that until the first
time we try to use it, which is where the check is moved to.
Fixes: 0b84e4f8b793 ("swiotlb: Add restricted DMA pool initialization")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuniyuki Iwashima <kuniyu@amazon.com>
Date: Mon Apr 24 15:20:22 2023 -0700
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
[ Upstream commit 50749f2dd6854a41830996ad302aef2ffaf011d8 ]
syzkaller reported [0] memory leaks of an UDP socket and ZEROCOPY
skbs. We can reproduce the problem with these sequences:
sk = socket(AF_INET, SOCK_DGRAM, 0)
sk.setsockopt(SOL_SOCKET, SO_TIMESTAMPING, SOF_TIMESTAMPING_TX_SOFTWARE)
sk.setsockopt(SOL_SOCKET, SO_ZEROCOPY, 1)
sk.sendto(b'', MSG_ZEROCOPY, ('127.0.0.1', 53))
sk.close()
sendmsg() calls msg_zerocopy_alloc(), which allocates a skb, sets
skb->cb->ubuf.refcnt to 1, and calls sock_hold(). Here, struct
ubuf_info_msgzc indirectly holds a refcnt of the socket. When the
skb is sent, __skb_tstamp_tx() clones it and puts the clone into
the socket's error queue with the TX timestamp.
When the original skb is received locally, skb_copy_ubufs() calls
skb_unclone(), and pskb_expand_head() increments skb->cb->ubuf.refcnt.
This additional count is decremented while freeing the skb, but struct
ubuf_info_msgzc still has a refcnt, so __msg_zerocopy_callback() is
not called.
The last refcnt is not released unless we retrieve the TX timestamped
skb by recvmsg(). Since we clear the error queue in inet_sock_destruct()
after the socket's refcnt reaches 0, there is a circular dependency.
If we close() the socket holding such skbs, we never call sock_put()
and leak the count, sk, and skb.
TCP has the same problem, and commit e0c8bccd40fc ("net: stream:
purge sk_error_queue in sk_stream_kill_queues()") tried to fix it
by calling skb_queue_purge() during close(). However, there is a
small chance that skb queued in a qdisc or device could be put
into the error queue after the skb_queue_purge() call.
In __skb_tstamp_tx(), the cloned skb should not have a reference
to the ubuf to remove the circular dependency, but skb_clone() does
not call skb_copy_ubufs() for zerocopy skb. So, we need to call
skb_orphan_frags_rx() for the cloned skb to call skb_copy_ubufs().
[0]:
BUG: memory leak
unreferenced object 0xffff88800c6d2d00 (size 1152):
comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 cd af e8 81 00 00 00 00 ................
02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<0000000055636812>] sk_prot_alloc+0x64/0x2a0 net/core/sock.c:2024
[<0000000054d77b7a>] sk_alloc+0x3b/0x800 net/core/sock.c:2083
[<0000000066f3c7e0>] inet_create net/ipv4/af_inet.c:319 [inline]
[<0000000066f3c7e0>] inet_create+0x31e/0xe40 net/ipv4/af_inet.c:245
[<000000009b83af97>] __sock_create+0x2ab/0x550 net/socket.c:1515
[<00000000b9b11231>] sock_create net/socket.c:1566 [inline]
[<00000000b9b11231>] __sys_socket_create net/socket.c:1603 [inline]
[<00000000b9b11231>] __sys_socket_create net/socket.c:1588 [inline]
[<00000000b9b11231>] __sys_socket+0x138/0x250 net/socket.c:1636
[<000000004fb45142>] __do_sys_socket net/socket.c:1649 [inline]
[<000000004fb45142>] __se_sys_socket net/socket.c:1647 [inline]
[<000000004fb45142>] __x64_sys_socket+0x73/0xb0 net/socket.c:1647
[<0000000066999e0e>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<0000000066999e0e>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
[<0000000017f238c1>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
BUG: memory leak
unreferenced object 0xffff888017633a00 (size 240):
comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 2d 6d 0c 80 88 ff ff .........-m.....
backtrace:
[<000000002b1c4368>] __alloc_skb+0x229/0x320 net/core/skbuff.c:497
[<00000000143579a6>] alloc_skb include/linux/skbuff.h:1265 [inline]
[<00000000143579a6>] sock_omalloc+0xaa/0x190 net/core/sock.c:2596
[<00000000be626478>] msg_zerocopy_alloc net/core/skbuff.c:1294 [inline]
[<00000000be626478>] msg_zerocopy_realloc+0x1ce/0x7f0 net/core/skbuff.c:1370
[<00000000cbfc9870>] __ip_append_data+0x2adf/0x3b30 net/ipv4/ip_output.c:1037
[<0000000089869146>] ip_make_skb+0x26c/0x2e0 net/ipv4/ip_output.c:1652
[<00000000098015c2>] udp_sendmsg+0x1bac/0x2390 net/ipv4/udp.c:1253
[<0000000045e0e95e>] inet_sendmsg+0x10a/0x150 net/ipv4/af_inet.c:819
[<000000008d31bfde>] sock_sendmsg_nosec net/socket.c:714 [inline]
[<000000008d31bfde>] sock_sendmsg+0x141/0x190 net/socket.c:734
[<0000000021e21aa4>] __sys_sendto+0x243/0x360 net/socket.c:2117
[<00000000ac0af00c>] __do_sys_sendto net/socket.c:2129 [inline]
[<00000000ac0af00c>] __se_sys_sendto net/socket.c:2125 [inline]
[<00000000ac0af00c>] __x64_sys_sendto+0xe1/0x1c0 net/socket.c:2125
[<0000000066999e0e>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<0000000066999e0e>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
[<0000000017f238c1>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Fixes: b5947e5d1e71 ("udp: msg_zerocopy")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kang Chen <void0red@hust.edu.cn>
Date: Wed Apr 19 10:07:48 2023 +0800
thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe
[ Upstream commit f05c7b7d9ea9477fcc388476c6f4ade8c66d2d26 ]
Smatch reports:
1. mtk_thermal_probe() warn: 'apmixed_base' from of_iomap() not released.
2. mtk_thermal_probe() warn: 'auxadc_base' from of_iomap() not released.
The original code forgets to release iomap resource when handling errors,
fix it by switch to devm_of_iomap.
Fixes: 89945047b166 ("thermal: mediatek: Add tsensor support for V2 thermal system")
Signed-off-by: Kang Chen <void0red@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230419020749.621257-1-void0red@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Date: Mon Dec 12 11:29:36 2022 +0100
thunderbolt: Use correct type in tb_port_is_clx_enabled() prototype
commit d31137619776f9c173a46a79bc7733a2b106061f upstream.
tb_port_is_clx_enabled() generates a valid warning with gcc-13:
drivers/thunderbolt/switch.c:1286:6: error: conflicting types for 'tb_port_is_clx_enabled' due to enum/integer mismatch; have 'bool(struct tb_port *, unsigned int)' ...
drivers/thunderbolt/tb.h:1050:6: note: previous declaration of 'tb_port_is_clx_enabled' with type 'bool(struct tb_port *, enum tb_clx)' ...
I.e. the type of the 2nd parameter of tb_port_is_clx_enabled() in the
declaration is unsigned int, while the definition spells enum tb_clx.
Synchronize them to the former as the parameter is in fact a mask of the
enum values.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Tue Apr 18 14:26:39 2023 +0200
tick/common: Align tick period with the HZ tick.
[ Upstream commit e9523a0d81899361214d118ad60ef76f0e92f71d ]
With HIGHRES enabled tick_sched_timer() is programmed every jiffy to
expire the timer_list timers. This timer is programmed accurate in
respect to CLOCK_MONOTONIC so that 0 seconds and nanoseconds is the
first tick and the next one is 1000/CONFIG_HZ ms later. For HZ=250 it is
every 4 ms and so based on the current time the next tick can be
computed.
This accuracy broke since the commit mentioned below because the jiffy
based clocksource is initialized with higher accuracy in
read_persistent_wall_and_boot_offset(). This higher accuracy is
inherited during the setup in tick_setup_device(). The timer still fires
every 4ms with HZ=250 but timer is no longer aligned with
CLOCK_MONOTONIC with 0 as it origin but has an offset in the us/ns part
of the timestamp. The offset differs with every boot and makes it
impossible for user land to align with the tick.
Align the tick period with CLOCK_MONOTONIC ensuring that it is always a
multiple of 1000/CONFIG_HZ ms.
Fixes: 857baa87b6422 ("sched/clock: Enable sched clock early")
Reported-by: Gusenleitner Klaus <gus@keba.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20230406095735.0_14edn3@linutronix.de
Link: https://lore.kernel.org/r/20230418122639.ikgfvu3f@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Joel Fernandes (Google) <joel@joelfernandes.org>
Date: Tue Jan 24 17:31:26 2023 +0000
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
commit 58d7668242647e661a20efe065519abd6454287e upstream.
For CONFIG_NO_HZ_FULL systems, the tick_do_timer_cpu cannot be offlined.
However, cpu_is_hotpluggable() still returns true for those CPUs. This causes
torture tests that do offlining to end up trying to offline this CPU causing
test failures. Such failure happens on all architectures.
Fix the repeated error messages thrown by this (even if the hotplug errors are
harmless) by asking the opinion of the nohz subsystem on whether the CPU can be
hotplugged.
[ Apply Frederic Weisbecker feedback on refactoring tick_nohz_cpu_down(). ]
For drivers/base/ portion:
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: rcu <rcu@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 2987557f52b9 ("driver-core/cpu: Expose hotpluggability to the rest of the kernel")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Wed Apr 26 15:43:34 2023 +0200
timekeeping: Fix references to nonexistent ktime_get_fast_ns()
[ Upstream commit 158009f1b4a33bc0f354b994eea361362bd83226 ]
There was never a function named ktime_get_fast_ns().
Presumably these should refer to ktime_get_mono_fast_ns() instead.
Fixes: c1ce406e80fb15fa ("timekeeping: Fix up function documentation for the NMI safe accessors")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/06df7b3cbd94f016403bbf6cd2b38e4368e7468f.1682516546.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Terry Bowman <terry.bowman@amd.com>
Date: Mon Feb 6 08:18:30 2023 -0600
tools/x86/kcpuid: Fix avx512bw and avx512lvl fields in Fn00000007
[ Upstream commit 4e347bdf44c1fd4296a7b9657a2c0e1bd900fa50 ]
Leaf Fn00000007 contains avx512bw at bit 26 and avx512vl at bit 28. This
is incorrect per the SDM. Correct avx512bw to be bit 30 and avx512lvl to
be bit 31.
Fixes: c6b2f240bf8d ("tools/x86: Add a kcpuid tool to show raw CPU features")
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20230206141832.4162264-2-terry.bowman@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luis Gerhorst <gerhorst@cs.fau.de>
Date: Mon Feb 27 16:08:54 2023 +0100
tools: bpftool: Remove invalid \' json escape
[ Upstream commit c679bbd611c08b0559ffae079330bc4e5574696a ]
RFC8259 ("The JavaScript Object Notation (JSON) Data Interchange
Format") only specifies \", \\, \/, \b, \f, \n, \r, and \r as valid
two-character escape sequences. This does not include \', which is not
required in JSON because it exclusively uses double quotes as string
separators.
Solidus (/) may be escaped, but does not have to. Only reverse
solidus (\), double quotes ("), and the control characters have to be
escaped. Therefore, with this fix, bpftool correctly supports all valid
two-character escape sequences (but still does not support characters
that require multi-character escape sequences).
Witout this fix, attempting to load a JSON file generated by bpftool
using Python 3.10.6's default json.load() may fail with the error
"Invalid \escape" if the file contains the invalid escaped single
quote (\').
Fixes: b66e907cfee2 ("tools: bpftool: copy JSON writer from iproute2 repository")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230227150853.16863-1-gerhorst@cs.fau.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Date: Thu Nov 24 14:55:33 2022 +0100
tpm, tpm: Implement usage counter for locality
[ Upstream commit 7a2f55d0be296c4e81fd782f3d6c43ed4ec7e265 ]
Implement a usage counter for the (default) locality used by the TPM TIS
driver:
Request the locality from the TPM if it has not been claimed yet, otherwise
only increment the counter. Also release the locality if the counter is 0
otherwise only decrement the counter. Since in case of SPI the register
accesses are locked by means of the SPI bus mutex use a sleepable lock
(i.e. also a mutex) to ensure thread-safety of the counter which may be
accessed by both a userspace thread and the interrupt handler.
By doing this refactor the names of the amended functions to use a more
appropriate prefix.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 955df4f87760 ("tpm, tpm_tis: Claim locality when interrupts are reenabled on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Date: Thu Nov 24 14:55:29 2022 +0100
tpm, tpm_tis: Claim locality before writing interrupt registers
[ Upstream commit 15d7aa4e46eba87242a320f39773aa16faddadee ]
In tpm_tis_probe_single_irq() interrupt registers TPM_INT_VECTOR,
TPM_INT_STATUS and TPM_INT_ENABLE are modified to setup the interrupts.
Currently these modifications are done without holding a locality thus they
have no effect. Fix this by claiming the (default) locality before the
registers are written.
Since now tpm_tis_gen_interrupt() is called with the locality already
claimed remove locality request and release from this function.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 955df4f87760 ("tpm, tpm_tis: Claim locality when interrupts are reenabled on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Date: Thu Nov 24 14:55:26 2022 +0100
tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE register
[ Upstream commit 282657a8bd7fddcf511b834f43705001668b33a7 ]
In disable_interrupts() the TPM_GLOBAL_INT_ENABLE bit is unset in the
TPM_INT_ENABLE register to shut the interrupts off. However modifying the
register is only possible with a held locality. So claim the locality
before disable_interrupts() is called.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 955df4f87760 ("tpm, tpm_tis: Claim locality when interrupts are reenabled on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Date: Thu Nov 24 14:55:36 2022 +0100
tpm, tpm_tis: Claim locality when interrupts are reenabled on resume
[ Upstream commit 955df4f87760b3bb2af253d3fbb12fb712b3ffa6 ]
In tpm_tis_resume() make sure that the locality has been claimed when
tpm_tis_reenable_interrupts() is called. Otherwise the writings to the
register might not have any effect.
Fixes: 45baa1d1fa39 ("tpm_tis: Re-enable interrupts upon (S3) resume")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Date: Thu Nov 24 14:55:27 2022 +0100
tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failed
[ Upstream commit 6d789ad726950e612a7f31044260337237c5b490 ]
Both functions tpm_tis_probe_irq_single() and tpm_tis_probe_irq() may setup
the interrupts and then return with an error. This case is indicated by a
missing TPM_CHIP_FLAG_IRQ flag in chip->flags.
Currently the interrupt setup is only undone if tpm_tis_probe_irq_single()
fails. Undo the setup also if tpm_tis_probe_irq() fails.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 955df4f87760 ("tpm, tpm_tis: Claim locality when interrupts are reenabled on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Date: Thu Nov 24 14:55:28 2022 +0100
tpm, tpm_tis: Do not skip reset of original interrupt vector
[ Upstream commit ed9be0e6c892a783800d77a41ca4c7255c6af8c5 ]
If in tpm_tis_probe_irq_single() an error occurs after the original
interrupt vector has been read, restore the interrupts before the error is
returned.
Since the caller does not check the error value, return -1 in any case that
the TPM_CHIP_FLAG_IRQ flag is not set. Since the return value of function
tpm_tis_gen_interrupt() is not longer used, make it a void function.
Fixes: 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jarkko Sakkinen <jarkko@kernel.org>
Date: Sun Apr 23 18:49:58 2023 +0300
tpm: Add !tpm_amd_is_rng_defective() to the hwrng_unregister() call site
commit bd8621ca1510e6e802df9855bdc35a04a3cfa932 upstream.
The following crash was reported:
[ 1950.279393] list_del corruption, ffff99560d485790->next is NULL
[ 1950.279400] ------------[ cut here ]------------
[ 1950.279401] kernel BUG at lib/list_debug.c:49!
[ 1950.279405] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 1950.279407] CPU: 11 PID: 5886 Comm: modprobe Tainted: G O 6.2.8_1 #1
[ 1950.279409] Hardware name: Gigabyte Technology Co., Ltd. B550M AORUS PRO-P/B550M AORUS PRO-P,
BIOS F15c 05/11/2022
[ 1950.279410] RIP: 0010:__list_del_entry_valid+0x59/0xc0
[ 1950.279415] Code: 48 8b 01 48 39 f8 75 5a 48 8b 72 08 48 39 c6 75 65 b8 01 00 00 00 c3 cc cc cc
cc 48 89 fe 48 c7 c7 08 a8 13 9e e8 b7 0a bc ff <0f> 0b 48 89 fe 48 c7 c7 38 a8 13 9e e8 a6 0a bc
ff 0f 0b 48 89 fe
[ 1950.279416] RSP: 0018:ffffa96d05647e08 EFLAGS: 00010246
[ 1950.279418] RAX: 0000000000000033 RBX: ffff99560d485750 RCX: 0000000000000000
[ 1950.279419] RDX: 0000000000000000 RSI: ffffffff9e107c59 RDI: 00000000ffffffff
[ 1950.279420] RBP: ffffffffc19c5168 R08: 0000000000000000 R09: ffffa96d05647cc8
[ 1950.279421] R10: 0000000000000003 R11: ffffffff9ea2a568 R12: 0000000000000000
[ 1950.279422] R13: ffff99560140a2e0 R14: ffff99560127d2e0 R15: 0000000000000000
[ 1950.279422] FS: 00007f67da795380(0000) GS:ffff995d1f0c0000(0000) knlGS:0000000000000000
[ 1950.279424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1950.279424] CR2: 00007f67da7e65c0 CR3: 00000001feed2000 CR4: 0000000000750ee0
[ 1950.279426] PKRU: 55555554
[ 1950.279426] Call Trace:
[ 1950.279428] <TASK>
[ 1950.279430] hwrng_unregister+0x28/0xe0 [rng_core]
[ 1950.279436] tpm_chip_unregister+0xd5/0xf0 [tpm]
Add the forgotten !tpm_amd_is_rng_defective() invariant to the
hwrng_unregister() call site inside tpm_chip_unregister().
Cc: stable@vger.kernel.org
Reported-by: Martin Dimov <martin@dmarto.com>
Link: https://lore.kernel.org/linux-integrity/3d1d7e9dbfb8c96125bc93b6b58b90a7@dmarto.com/
Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs")
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Tested-by: Martin Dimov <martin@dmarto.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Beau Belgrave <beaub@linux.microsoft.com>
Date: Tue Apr 25 15:51:04 2023 -0700
tracing/user_events: Ensure write index cannot be negative
[ Upstream commit cd98c93286a30cc4588dfd02453bec63c2f4acf4 ]
The write index indicates which event the data is for and accesses a
per-file array. The index is passed by user processes during write()
calls as the first 4 bytes. Ensure that it cannot be negative by
returning -EINVAL to prevent out of bounds accesses.
Update ftrace self-test to ensure this occurs properly.
Link: https://lkml.kernel.org/r/20230425225107.8525-2-beaub@linux.microsoft.com
Fixes: 7f5a08c79df3 ("user_events: Add minimal support for trace_event into ftrace")
Reported-by: Doug Cook <dcook@linux.microsoft.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Thu Mar 9 22:13:02 2023 -0500
tracing: Error if a trace event has an array for a __field()
[ Upstream commit f82e7ca019dfad3b006fd3b772f7ac569672db55 ]
A __field() in the TRACE_EVENT() macro is used to set up the fields of the
trace event data. It is for single storage units (word, char, int,
pointer, etc) and not for complex structures or arrays. Unfortunately,
there's nothing preventing the build from accepting:
__field(int, arr[5]);
from building. It will turn into a array value. This use to work fine, as
the offset and size use to be determined by the macro using the field name,
but things have changed and the offset and size are now determined by the
type. So the above would only be size 4, and the next field will be
located 4 bytes from it (instead of 20).
The proper way to declare static arrays is to use the __array() macro.
Instead of __field(int, arr[5]) it should be __array(int, arr, 5).
Add some macro tricks to the building of a trace event from the
TRACE_EVENT() macro such that __field(int, arr[5]) will fail to build. A
comment by the failure will explain why the build failed.
Link: https://lore.kernel.org/lkml/20230306122549.236561-1-douglas.raillard@arm.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230309221302.642e82d9@gandalf.local.home
Reported-by: Douglas RAILLARD <douglas.raillard@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ondrej Mosnacek <omosnace@redhat.com>
Date: Wed May 3 16:01:14 2023 +0200
tracing: Fix permissions for the buffer_percent file
commit 4f94559f40ad06d627c0fdfc3319cec778a2845b upstream.
This file defines both read and write operations, yet it is being
created as read-only. This means that it can't be written to without the
CAP_DAC_OVERRIDE capability. Fix the permissions to allow root to write
to it without the need to override DAC perms.
Link: https://lore.kernel.org/linux-trace-kernel/20230503140114.3280002-1-omosnace@redhat.com
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 03329f993978 ("tracing: Add tracefs file buffer_percentage")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Fri Mar 17 13:33:17 2023 +0200
tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH
commit 094fb49a2d0d6827c86d2e0840873e6db0c491d2 upstream.
If userspace races tcsetattr() with a write, the drained condition
might not be guaranteed by the kernel. There is a race window after
checking Tx is empty before tty_set_termios() takes termios_rwsem for
write. During that race window, more characters can be queued by a
racing writer.
Any ongoing transmission might produce garbage during HW's
->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be
preventing such a character corruption. If those flags are set, take
tty's write lock to stop any writer before performing the lower layer
Tx empty check and wait for the pending characters to be sent (if any).
The initial wait for all-writers-done must be placed outside of tty's
write lock to avoid deadlock which makes it impossible to use
tty_wait_until_sent(). The write lock is retried if a racing write is
detected.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shenwei Wang <shenwei.wang@nxp.com>
Date: Mon Apr 10 14:55:55 2023 -0500
tty: serial: fsl_lpuart: adjust buffer length to the intended size
[ Upstream commit f73fd750552524b06b5d77ebfdd106ccc8fcac61 ]
Based on the fls function definition provided below, we should not
subtract 1 to obtain the correct buffer length:
fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20230410195555.1003900-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kevin Brodsky <kevin.brodsky@arm.com>
Date: Tue Apr 11 10:27:47 2023 +0100
uapi/linux/const.h: prefer ISO-friendly __typeof__
[ Upstream commit 31088f6f7906253ef4577f6a9b84e2d42447dba0 ]
typeof is (still) a GNU extension, which means that it cannot be used when
building ISO C (e.g. -std=c99). It should therefore be avoided in uapi
headers in favour of the ISO-friendly __typeof__.
Unfortunately this issue could not be detected by
CONFIG_UAPI_HEADER_TEST=y as the __ALIGN_KERNEL() macro is not expanded in
any uapi header.
This matters from a userspace perspective, not a kernel one. uapi
headers and their contents are expected to be usable in a variety of
situations, and in particular when building ISO C applications (with
-std=c99 or similar).
This particular problem can be reproduced by trying to use the
__ALIGN_KERNEL macro directly in application code, say:
#include <linux/const.h>
int align(int x, int a)
{
return __KERNEL_ALIGN(x, a);
}
and trying to build that with -std=c99.
Link: https://lkml.kernel.org/r/20230411092747.3759032-1-kevin.brodsky@arm.com
Fixes: a79ff731a1b2 ("netfilter: xtables: make XT_ALIGN() usable in exported headers by exporting __ALIGN_KERNEL()")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reported-by: Ruben Ayrapetyan <ruben.ayrapetyan@arm.com>
Tested-by: Ruben Ayrapetyan <ruben.ayrapetyan@arm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wang YanQing <udknight@gmail.com>
Date: Tue Mar 28 23:35:34 2023 +0800
ubi: Fix return value overwrite issue in try_write_vid_and_data()
commit 31a149d5c13c4cbcf97de3435817263a2d8c9d6e upstream.
The commit 2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code")
adds helper function, try_write_vid_and_data(), to simplify the code, but this
helper function has bug, it will return 0 (success) when ubi_io_write_vid_hdr()
or the ubi_io_write_data() return error number (-EIO, etc), because the return
value of ubi_wl_put_peb() will overwrite the original return value.
This issue will cause unexpected data loss issue, because the caller of this
function and UBIFS willn't know the data is lost.
Fixes: 2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code")
Cc: stable@vger.kernel.org
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhihao Cheng <chengzhihao1@huawei.com>
Date: Wed Mar 1 20:29:19 2023 +0800
ubifs: Fix memleak when insert_old_idx() failed
commit b5fda08ef213352ac2df7447611eb4d383cce929 upstream.
Following process will cause a memleak for copied up znode:
dirty_cow_znode
zn = copy_znode(c, znode);
err = insert_old_idx(c, zbr->lnum, zbr->offs);
if (unlikely(err))
return ERR_PTR(err); // No one refers to zn.
Fetch a reproducer in [Link].
Function copy_znode() is split into 2 parts: resource allocation
and znode replacement, insert_old_idx() is split in similar way,
so resource cleanup could be done in error handling path without
corrupting metadata(mem & disk).
It's okay that old index inserting is put behind of add_idx_dirt(),
old index is used in layout_leb_in_gaps(), so the two processes do
not depend on each other.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216705
Fixes: 1e51764a3c2a ("UBIFS: add new flash file system")
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mårten Lindahl <marten.lindahl@axis.com>
Date: Thu Mar 30 16:40:59 2023 +0200
ubifs: Fix memory leak in do_rename
commit 3a36d20e012903f45714df2731261fdefac900cb upstream.
If renaming a file in an encrypted directory, function
fscrypt_setup_filename allocates memory for a file name. This name is
never used, and before returning to the caller the memory for it is not
freed.
When running kmemleak on it we see that it is registered as a leak. The
report below is triggered by a simple program 'rename' that renames a
file in an encrypted directory:
unreferenced object 0xffff888101502840 (size 32):
comm "rename", pid 9404, jiffies 4302582475 (age 435.735s)
backtrace:
__kmem_cache_alloc_node
__kmalloc
fscrypt_setup_filename
do_rename
ubifs_rename
vfs_rename
do_renameat2
To fix this we can remove the call to fscrypt_setup_filename as it's not
needed.
Fixes: 278d9a243635f26 ("ubifs: Rename whiteout atomically")
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mårten Lindahl <marten.lindahl@axis.com>
Date: Thu Mar 30 11:32:14 2023 +0200
ubifs: Free memory for tmpfile name
commit 1fb815b38bb31d6af9bd0540b8652a0d6fe6cfd3 upstream.
When opening a ubifs tmpfile on an encrypted directory, function
fscrypt_setup_filename allocates memory for the name that is to be
stored in the directory entry, but after the name has been copied to the
directory entry inode, the memory is not freed.
When running kmemleak on it we see that it is registered as a leak. The
report below is triggered by a simple program 'tmpfile' just opening a
tmpfile:
unreferenced object 0xffff88810178f380 (size 32):
comm "tmpfile", pid 509, jiffies 4294934744 (age 1524.742s)
backtrace:
__kmem_cache_alloc_node
__kmalloc
fscrypt_setup_filename
ubifs_tmpfile
vfs_tmpfile
path_openat
Free this memory after it has been copied to the inode.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yinhao Hu <dddddd@hust.edu.cn>
Date: Wed Apr 12 13:58:52 2023 +0800
usb: chipidea: fix missing goto in `ci_hdrc_probe`
[ Upstream commit d6f712f53b79f5017cdcefafb7a5aea9ec52da5d ]
From the comment of ci_usb_phy_init, it returns an error code if
usb_phy_init has failed, and it should do some clean up, not just
return directly.
Fix this by goto the error handling.
Fixes: 74475ede784d ("usb: chipidea: move PHY operation to core")
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Yinhao Hu <dddddd@hust.edu.cn>
Link: https://lore.kernel.org/r/20230412055852.971991-1-dddddd@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johan Hovold <johan+linaro@kernel.org>
Date: Tue Apr 4 09:25:14 2023 +0200
USB: dwc3: fix runtime pm imbalance on probe errors
commit 9a8ad10c9f2e0925ff26308ec6756b93fc2f4977 upstream.
Make sure not to suspend the device when probe fails to avoid disabling
clocks and phys multiple times.
Fixes: 328082376aea ("usb: dwc3: fix runtime PM in error path")
Cc: stable@vger.kernel.org # 4.8
Cc: Roger Quadros <rogerq@ti.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230404072524.19014-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Johan Hovold <johan+linaro@kernel.org>
Date: Tue Apr 4 09:25:15 2023 +0200
USB: dwc3: fix runtime pm imbalance on unbind
commit 44d257e9012ee8040e41d224d0e5bfb5ef5427ea upstream.
Make sure to balance the runtime PM usage count on driver unbind by
adding back the pm_runtime_allow() call that had been erroneously
removed.
Fixes: 266d0493900a ("usb: dwc3: core: don't trigger runtime pm when remove driver")
Cc: stable@vger.kernel.org # 5.9
Cc: Li Jun <jun.li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230404072524.19014-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Prashanth K <quic_prashk@quicinc.com>
Date: Fri Feb 24 11:16:58 2023 +0530
usb: dwc3: gadget: Change condition for processing suspend event
[ Upstream commit 4decf4060ecfee1f7a710999fcd421645ac0c419 ]
Currently we process the suspend interrupt event only if the
device is in configured state. Consider a case where device
is not configured and got suspend interrupt, in that case our
gadget will still use 100mA as composite_suspend didn't happen.
But battery charging specification (BC1.2) expects a downstream
device to draw less than 2.5mA when unconnected OR suspended.
Fix this by removing the condition for processing suspend event,
and thus composite_resume would set vbus draw to 2.
Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1677217619-10261-2-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wesley Cheng <quic_wcheng@quicinc.com>
Date: Thu Apr 13 12:57:40 2023 -0700
usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
commit 02435a739b81ae24aff5d6e930efef9458e2af3c upstream.
It was observed that there are hosts that may complete pending SETUP
transactions before the stop active transfers and controller halt occurs,
leading to lingering endxfer commands on DEPs on subsequent pullup/gadget
start iterations.
dwc3_gadget_ep_disable name=ep8in flags=0x3009 direction=1
dwc3_gadget_ep_disable name=ep4in flags=1 direction=1
dwc3_gadget_ep_disable name=ep3out flags=1 direction=0
usb_gadget_disconnect deactivated=0 connected=0 ret=0
The sequence shows that the USB gadget disconnect (dwc3_gadget_pullup(0))
routine completed successfully, allowing for the USB gadget to proceed with
a USB gadget connect. However, if this occurs the system runs into an
issue where:
BUG: spinlock already unlocked on CPU
spin_bug+0x0
dwc3_remove_requests+0x278
dwc3_ep0_out_start+0xb0
__dwc3_gadget_start+0x25c
This is due to the pending endxfers, leading to gadget start (w/o lock
held) to execute the remove requests, which will unlock the dwc3
spinlock as part of giveback.
To mitigate this, resolve the pending endxfers on the pullup disable
path by re-locating the SETUP phase check after stop active transfers, since
that is where the DWC3_EP_DELAY_STOP is potentially set. This also allows
for handling of a host that may be unresponsive by using the completion
timeout to trigger the stall and restart for EP0.
Fixes: c96683798e27 ("usb: dwc3: ep0: Don't prepare beyond Setup stage")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20230413195742.11821-2-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jon Hunter <jonathanh@nvidia.com>
Date: Wed Apr 5 19:18:53 2023 +0100
usb: gadget: tegra-xudc: Fix crash in vbus_draw
[ Upstream commit 5629d31955297ca47b9283c64fff70f2f34aa528 ]
Commit ac82b56bda5f ("usb: gadget: tegra-xudc: Add vbus_draw support")
populated the vbus_draw callback for the Tegra XUDC driver. The function
tegra_xudc_gadget_vbus_draw(), that was added by this commit, assumes
that the pointer 'curr_usbphy' has been initialised, which is not always
the case because this is only initialised when the USB role is updated.
Fix this crash, by checking that the 'curr_usbphy' is valid before
dereferencing.
Fixes: ac82b56bda5f ("usb: gadget: tegra-xudc: Add vbus_draw support")
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230405181854.42355-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Badhri Jagan Sridharan <badhri@google.com>
Date: Fri Apr 7 03:07:40 2023 +0000
usb: gadget: udc: core: Invoke usb_gadget_connect only when started
commit 0db213ea8eed5534a5169e807f28103cbc9d23df upstream.
usb_udc_connect_control does not check to see if the udc has already
been started. This causes gadget->ops->pullup to be called through
usb_gadget_connect when invoked from usb_udc_vbus_handler even before
usb_gadget_udc_start is called. Guard this by checking for udc->started
in usb_udc_connect_control before invoking usb_gadget_connect.
Guarding udc->vbus, udc->started, gadget->connect, gadget->deactivate
related functions with connect_lock. usb_gadget_connect_locked,
usb_gadget_disconnect_locked, usb_udc_connect_control_locked,
usb_gadget_udc_start_locked, usb_gadget_udc_stop_locked are called with
this lock held as they can be simulataneously invoked from different code
paths.
Adding an additional check to make sure udc is started(udc->started)
before pullup callback is invoked.
Fixes: 628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20230407030741.3163220-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Badhri Jagan Sridharan <badhri@google.com>
Date: Fri Apr 7 03:07:41 2023 +0000
usb: gadget: udc: core: Prevent redundant calls to pullup
commit a3afbf5cc887fc3401f012fe629810998ed61859 upstream.
usb_gadget_connect calls gadget->ops->pullup without checking whether
gadget->connected was previously set. Make this symmetric to
usb_gadget_disconnect by returning early if gadget->connected is
already set.
Fixes: 5a1da544e572 ("usb: gadget: core: do not try to disconnect gadget if it is not connected")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20230407030741.3163220-2-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zheng Wang <zyytlz.wz@163.com>
Date: Mon Mar 20 14:29:31 2023 +0800
usb: gadget: udc: renesas_usb3: Fix use after free bug in renesas_usb3_remove due to race condition
[ Upstream commit 2b947f8769be8b8181dc795fd292d3e7120f5204 ]
In renesas_usb3_probe, role_work is bound with renesas_usb3_role_work.
renesas_usb3_start will be called to start the work.
If we remove the driver which will call usbhs_remove, there may be
an unfinished work. The possible sequence is as follows:
CPU0 CPU1
renesas_usb3_role_work
renesas_usb3_remove
usb_role_switch_unregister
device_unregister
kfree(sw)
//free usb3->role_sw
usb_role_switch_set_role
//use usb3->role_sw
The usb3->role_sw could be freed under such circumstance and then
used in usb_role_switch_set_role.
This bug was found by static analysis. And note that removing a
driver is a root-only operation, and should never happen in normal
case. But the root user may directly remove the device which
will also trigger the remove function.
Fix it by canceling the work before cleanup in the renesas_usb3_remove.
Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20230320062931.505170-1-zyytlz.wz@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Tue Mar 7 17:30:37 2023 +0100
usb: host: xhci-rcar: remove leftover quirk handling
[ Upstream commit 5d67f4861884762ebc2bddb5d667444e45f25782 ]
Loading V3 firmware does not need a quirk anymore, remove the leftover
code.
Fixes: ed8603e11124 ("usb: host: xhci-rcar: Simplify getting the firmware name for R-Car Gen3")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20230307163041.3815-10-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: Mon Apr 17 10:51:59 2023 +0800
usb: mtu3: fix kernel panic at qmu transfer done irq handler
[ Upstream commit d28f4091ea7ec3510fd6a3c6d433234e7a2bef14 ]
When handle qmu transfer irq, it will unlock @mtu->lock before give back
request, if another thread handle disconnect event at the same time, and
try to disable ep, it may lock @mtu->lock and free qmu ring, then qmu
irq hanlder may get a NULL gpd, avoid the KE by checking gpd's value before
handling it.
e.g.
qmu done irq on cpu0 thread running on cpu1
qmu_done_tx()
handle gpd [0]
mtu3_requ_complete() mtu3_gadget_ep_disable()
unlock @mtu->lock
give back request lock @mtu->lock
mtu3_ep_disable()
mtu3_gpd_ring_free()
unlock @mtu->lock
lock @mtu->lock
get next gpd [1]
[1]: goto [0] to handle next gpd, and next gpd may be NULL.
Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20230417025203.18097-3-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cindy Lu <lulu@redhat.com>
Date: Thu Apr 20 23:17:34 2023 +0800
vhost_vdpa: fix unmap process in no-batch mode
commit c82729e06644f4e087f5ff0f91b8fb15e03b8890 upstream.
While using the vdpa device with vIOMMU enabled
in the guest VM, when the vdpa device bind to vfio-pci and run testpmd
then system will fail to unmap.
The test process is
Load guest VM --> attach to virtio driver--> bind to vfio-pci driver
So the mapping process is
1)batched mode map to normal MR
2)batched mode unmapped the normal MR
3)unmapped all the memory
4)mapped to iommu MR
This error happened in step 3). The iotlb was freed in step 2)
and the function vhost_vdpa_process_iotlb_msg will return fail
Which causes failure.
To fix this, we will not remove the AS while the iotlb->nmaps is 0.
This will free in the vhost_vdpa_clean
Cc: stable@vger.kernel.org
Fixes: aaca8373c4b1 ("vhost-vdpa: support ASID based IOTLB API")
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230420151734.860168-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dionna Glaze <dionnaglaze@google.com>
Date: Tue Mar 7 20:24:48 2023 +0100
virt/coco/sev-guest: Double-buffer messages
[ Upstream commit 965006103a14703cc42043bbf9b5e0cdf7a468ad ]
The encryption algorithms read and write directly to shared unencrypted
memory, which may leak information as well as permit the host to tamper
with the message integrity. Instead, copy whole messages in or out as
needed before doing any computation on them.
Fixes: d5af44dde546 ("x86/sev: Provide support for SNP guest request NAEs")
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230214164638.1189804-3-dionnaglaze@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Albert Huang <huangjie.albert@bytedance.com>
Date: Wed Mar 29 18:23:00 2023 +0800
virtio_ring: don't update event idx on get_buf
[ Upstream commit 6c0b057cec5eade4c3afec3908821176931a9997 ]
In virtio_net, if we disable napi_tx, when we trigger a tx interrupt,
the vq->event_triggered will be set to true. It is then never reset
until we explicitly call virtqueue_enable_cb_delayed or
virtqueue_enable_cb_prepare.
If we disable the napi_tx, virtqueue_enable_cb* will only be called when
the tx ring is getting relatively empty.
Since event_triggered is true, VRING_AVAIL_F_NO_INTERRUPT or
VRING_PACKED_EVENT_FLAG_DISABLE will not be set. As a result we update
vring_used_event(&vq->split.vring) or vq->packed.vring.driver->off_wrap
every time we call virtqueue_get_buf_ctx. This causes more interrupts.
To summarize:
1) event_triggered was set to true in vring_interrupt()
2) after this nothing will happen in virtqueue_disable_cb() so
VRING_AVAIL_F_NO_INTERRUPT is not set in avail_flags_shadow
3) virtqueue_get_buf_ctx_split() will still think the cb is enabled
and then it will publish a new event index
To fix:
update VRING_AVAIL_F_NO_INTERRUPT or VRING_PACKED_EVENT_FLAG_DISABLE in
the vq when we call virtqueue_disable_cb even when event_triggered is
true.
Tested with iperf:
iperf3 tcp stream:
vm1 -----------------> vm2
vm2 just receives tcp data stream from vm1, and sends acks to vm1,
there are many tx interrupts in vm2.
with the patch applied there are just a few tx interrupts.
v2->v3:
-update the interrupt disable flag even with the event_triggered is set,
-instead of checking whether event_triggered is set in
-virtqueue_get_buf_ctx_{packed/split}, will cause the drivers which have
-not called virtqueue_{enable/disable}_cb to miss notifications.
v3->v4:
-remove change for
-"if (vq->packed.event_flags_shadow != VRING_PACKED_EVENT_FLAG_DISABLE)"
-in virtqueue_disable_cb_packed
Fixes: 8d622d21d248 ("virtio: fix up virtio_disable_cb")
Signed-off-by: Albert Huang <huangjie.albert@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230329102300.61000-1-huangjie.albert@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Date: Wed Mar 15 08:33:02 2023 -0700
vlan: partially enable SIOCSHWTSTAMP in container
[ Upstream commit 731b73dba359e3ff00517c13aa0daa82b34ff466 ]
Setting timestamp filter was explicitly disabled on vlan devices in
containers because it might affect other processes on the host. But it's
absolutely legit in case when real device is in the same namespace.
Fixes: 873017af7784 ("vlan: disable SIOCSHWTSTAMP in container")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dae R. Jeong <threeearcat@gmail.com>
Date: Mon Mar 27 21:01:53 2023 +0900
vmci_host: fix a race condition in vmci_host_poll() causing GPF
[ Upstream commit ae13381da5ff0e8e084c0323c3cc0a945e43e9c7 ]
During fuzzing, a general protection fault is observed in
vmci_host_poll().
general protection fault, probably for non-canonical address 0xdffffc0000000019: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf]
RIP: 0010:__lock_acquire+0xf3/0x5e00 kernel/locking/lockdep.c:4926
<- omitting registers ->
Call Trace:
<TASK>
lock_acquire+0x1a4/0x4a0 kernel/locking/lockdep.c:5672
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xb3/0x100 kernel/locking/spinlock.c:162
add_wait_queue+0x3d/0x260 kernel/sched/wait.c:22
poll_wait include/linux/poll.h:49 [inline]
vmci_host_poll+0xf8/0x2b0 drivers/misc/vmw_vmci/vmci_host.c:174
vfs_poll include/linux/poll.h:88 [inline]
do_pollfd fs/select.c:873 [inline]
do_poll fs/select.c:921 [inline]
do_sys_poll+0xc7c/0x1aa0 fs/select.c:1015
__do_sys_ppoll fs/select.c:1121 [inline]
__se_sys_ppoll+0x2cc/0x330 fs/select.c:1101
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Example thread interleaving that causes the general protection fault
is as follows:
CPU1 (vmci_host_poll) CPU2 (vmci_host_do_init_context)
----- -----
// Read uninitialized context
context = vmci_host_dev->context;
// Initialize context
vmci_host_dev->context = vmci_ctx_create();
vmci_host_dev->ct_type = VMCIOBJ_CONTEXT;
if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) {
// Dereferencing the wrong pointer
poll_wait(..., &context->host_context);
}
In this scenario, vmci_host_poll() reads vmci_host_dev->context first,
and then reads vmci_host_dev->ct_type to check that
vmci_host_dev->context is initialized. However, since these two reads
are not atomically executed, there is a chance of a race condition as
described above.
To fix this race condition, read vmci_host_dev->context after checking
the value of vmci_host_dev->ct_type so that vmci_host_poll() always
reads an initialized context.
Reported-by: Dae R. Jeong <threeearcat@gmail.com>
Fixes: 8bf503991f87 ("VMCI: host side driver implementation.")
Signed-off-by: Dae R. Jeong <threeearcat@gmail.com>
Link: https://lore.kernel.org/r/ZCGFsdBAU4cYww5l@dragonet
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aditya Kumar Singh <quic_adisi@quicinc.com>
Date: Thu Mar 9 15:23:08 2023 +0530
wifi: ath11k: fix deinitialization of firmware resources
[ Upstream commit 5a78ac33e3cb8822da64dd1af196e83664b332b0 ]
Currently, in ath11k_ahb_fw_resources_init(), iommu domain
mapping is done only for the chipsets having fixed firmware
memory. Also, for such chipsets, mapping is done only if it
does not have TrustZone support.
During deinitialization, only if TrustZone support is not there,
iommu is unmapped back. However, for non fixed firmware memory
chipsets, TrustZone support is not there and this makes the
condition check to true and it tries to unmap the memory which
was not mapped during initialization.
This leads to the following trace -
[ 83.198790] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 83.259537] Modules linked in: ath11k_ahb ath11k qmi_helpers
.. snip ..
[ 83.280286] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 83.287228] pc : __iommu_unmap+0x30/0x140
[ 83.293907] lr : iommu_unmap+0x5c/0xa4
[ 83.298072] sp : ffff80000b3abad0
.. snip ..
[ 83.369175] Call trace:
[ 83.376282] __iommu_unmap+0x30/0x140
[ 83.378541] iommu_unmap+0x5c/0xa4
[ 83.382360] ath11k_ahb_fw_resource_deinit.part.12+0x2c/0xac [ath11k_ahb]
[ 83.385666] ath11k_ahb_free_resources+0x140/0x17c [ath11k_ahb]
[ 83.392521] ath11k_ahb_shutdown+0x34/0x40 [ath11k_ahb]
[ 83.398248] platform_shutdown+0x20/0x2c
[ 83.403455] device_shutdown+0x16c/0x1c4
[ 83.407621] kernel_restart_prepare+0x34/0x3c
[ 83.411529] kernel_restart+0x14/0x74
[ 83.415781] __do_sys_reboot+0x1c4/0x22c
[ 83.419427] __arm64_sys_reboot+0x1c/0x24
[ 83.423420] invoke_syscall+0x44/0xfc
[ 83.427326] el0_svc_common.constprop.3+0xac/0xe8
[ 83.430974] do_el0_svc+0xa0/0xa8
[ 83.435659] el0_svc+0x1c/0x44
[ 83.438957] el0t_64_sync_handler+0x60/0x144
[ 83.441910] el0t_64_sync+0x15c/0x160
[ 83.446343] Code: aa0103f4 f9400001 f90027a1 d2800001 (f94006a0)
[ 83.449903] ---[ end trace 0000000000000000 ]---
This can be reproduced by probing an AHB chipset which is not
having a fixed memory region. During reboot (or rmmod) trace
can be seen.
Fix this issue by adding a condition check on firmware fixed memory
hw_param as done in the counter initialization function.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Fixes: f9eec4947add ("ath11k: Add support for targets without trustzone")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230309095308.24937-1-quic_adisi@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christian Marangi <ansuelsmth@gmail.com>
Date: Thu Feb 9 23:26:22 2023 +0100
wifi: ath11k: fix SAC bug on peer addition with sta band migration
[ Upstream commit 60b7d62ba8cdbd073997bff0f1cdae8d844002c0 ]
Fix sleep in atomic context warning detected by Smatch static checker
analyzer.
Following the locking pattern for peer_rhash_add lock tbl_mtx_lock mutex
always even if sta is not transitioning to another band.
This is peer_add function and a more secure locking should not cause
performance regression.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Fixes: d673cb6fe6c0 ("wifi: ath11k: fix peer addition/deletion error on sta band migration")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230209222622.1751-1-ansuelsmth@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: P Praneesh <quic_ppranees@quicinc.com>
Date: Fri Mar 24 16:57:01 2023 +0200
wifi: ath11k: fix writing to unintended memory region
[ Upstream commit 756a7f90878f0866fd2fe167ef37e90b47326b96 ]
While initializing spectral, the magic value is getting written to the
invalid memory address leading to random boot-up crash. This occurs
due to the incorrect index increment in ath11k_dbring_fill_magic_value
function. Fix it by replacing the existing logic with memset32 to ensure
there is no invalid memory access.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1
Fixes: d3d358efc553 ("ath11k: add spectral/CFR buffer validation support")
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230321052900.16895-1-quic_ppranees@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kalle Valo <quic_kvalo@quicinc.com>
Date: Wed Mar 29 19:20:38 2023 +0300
wifi: ath11k: reduce the MHI timeout to 20s
[ Upstream commit cf5fa3ca0552f1b7ba8490de40700bbfb6979b17 ]
Currently ath11k breaks after hibernation, the reason being that ath11k expects
that the wireless device will have power during suspend and the firmware will
continue running. But of course during hibernation the power from the device is
cut off and firmware is not running when resuming, so ath11k will fail.
(The reason why ath11k needs the firmware running is the interaction between
mac80211 and MHI stack, it's a long story and more info in the bugzilla report.)
In SUSE kernels the watchdog timeout is reduced from the default 120 to 60 seconds:
CONFIG_DPM_WATCHDOG_TIMEOUT=60
But as the ath11k MHI timeout is 90 seconds the kernel will crash before will
ath11k will recover in resume callback. To avoid the crash reduce the MHI
timeout to just 20 seconds.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214649
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230329162038.8637-1-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Douglas Anderson <dianders@chromium.org>
Date: Wed Feb 1 08:54:42 2023 -0800
wifi: ath11k: Use platform_get_irq() to get the interrupt
[ Upstream commit f117276638b7600b981b3fe28550823cfbe1ef23 ]
As of commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ
resource from DT core"), we need to use platform_get_irq() instead of
platform_get_resource() to get our IRQs because
platform_get_resource() simply won't get them anymore.
This was already fixed in several other Atheros WiFi drivers,
apparently in response to Zeal Robot reports. An example of another
fix is commit 9503a1fc123d ("ath9k: Use platform_get_irq() to get the
interrupt"). ath11k seems to have been missed in this effort, though.
Without this change, WiFi wasn't coming up on my Qualcomm sc7280-based
hardware. Specifically, "platform_get_resource(pdev, IORESOURCE_IRQ,
i)" was failing even for i=0.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core")
Fixes: 00402f49d26f ("ath11k: Add support for WCN6750 device")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Jun Yu <junyuu@chromium.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230201084131.v2.1.I69cf3d56c97098287fe3a70084ee515098390b70@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Mon Feb 6 16:15:48 2023 +0300
wifi: ath5k: fix an off by one check in ath5k_eeprom_read_freq_list()
[ Upstream commit 4c856ee12df85aabd437c3836ed9f68d94268358 ]
This loop checks that i < max at the start of loop but then it does
i++ which could put it past the end of the array. It's harmless to
check again and prevent a potential out of bounds.
Fixes: 1048643ea94d ("ath5k: Clean up eeprom parsing and add missing calibration data")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/Y+D9hPQrHfWBJhXz@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Douglas Anderson <dianders@chromium.org>
Date: Wed Feb 1 08:54:43 2023 -0800
wifi: ath5k: Use platform_get_irq() to get the interrupt
[ Upstream commit 95c95251d0547b46d6571e4fbd51b42865c15a4a ]
As of commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ
resource from DT core"), we need to use platform_get_irq() instead of
platform_get_resource() to get our IRQs because
platform_get_resource() simply won't get them anymore.
This was already fixed in several other Atheros WiFi drivers,
apparently in response to Zeal Robot reports. An example of another
fix is commit 9503a1fc123d ("ath9k: Use platform_get_irq() to get the
interrupt"). ath5k seems to have been missed in this effort, though.
Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230201084131.v2.2.Ic4f8542b0588d7eb4bc6e322d4af3d2064e84ff0@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexey V. Vissarionov <gremlin@altlinux.org>
Date: Wed Feb 15 20:31:37 2023 +0200
wifi: ath6kl: minor fix for allocation size
[ Upstream commit 778f83f889e7fca37780d9640fcbd0229ae38eaa ]
Although the "param" pointer occupies more or equal space compared
to "*param", the allocation size should use the size of variable
itself.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: bdcd81707973cf8a ("Add ath6kl cleaned up driver")
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230117110414.GC12547@altlinux.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fedor Pchelkin <pchelkin@ispras.ru>
Date: Fri Feb 24 12:28:05 2023 +0200
wifi: ath6kl: reduce WARN to dev_dbg() in callback
[ Upstream commit 75c4a8154cb6c7239fb55d5550f481f6765fb83c ]
The warn is triggered on a known race condition, documented in the code above
the test, that is correctly handled. Using WARN() hinders automated testing.
Reducing severity.
Fixes: de2070fc4aa7 ("ath6kl: Fix kernel panic on continuous driver load/unload")
Reported-and-tested-by: syzbot+555908813b2ea35dae9a@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230126182431.867984-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fedor Pchelkin <pchelkin@ispras.ru>
Date: Thu Feb 16 22:23:01 2023 +0300
wifi: ath9k: hif_usb: fix memory leak of remain_skbs
[ Upstream commit 7654cc03eb699297130b693ec34e25f77b17c947 ]
hif_dev->remain_skb is allocated and used exclusively in
ath9k_hif_usb_rx_stream(). It is implied that an allocated remain_skb is
processed and subsequently freed (in error paths) only during the next
call of ath9k_hif_usb_rx_stream().
So, if the urbs are deallocated between those two calls due to the device
deinitialization or suspend, it is possible that ath9k_hif_usb_rx_stream()
is not called next time and the allocated remain_skb is leaked. Our local
Syzkaller instance was able to trigger that.
remain_skb makes sense when receiving two consecutive urbs which are
logically linked together, i.e. a specific data field from the first skb
indicates a cached skb to be allocated, memcpy'd with some data and
subsequently processed in the next call to ath9k_hif_usb_rx_stream(). Urbs
deallocation supposedly makes that link irrelevant so we need to free the
cached skb in those cases.
Fix the leak by introducing a function to explicitly free remain_skb (if
it is not NULL) when the rx urbs have been deallocated. remain_skb is NULL
when it has not been allocated at all (hif_dev struct is kzalloced) or
when it has been processed in next call to ath9k_hif_usb_rx_stream().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230216192301.171225-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: John Keeping <john@metanate.com>
Date: Tue Jan 24 10:42:48 2023 +0000
wifi: brcmfmac: support CQM RSSI notification with older firmware
[ Upstream commit ec52d77d077529f198fd874c550a26b9cc86a331 ]
Using the BCM4339 firmware from linux-firmware (version "BCM4339/2 wl0:
Sep 5 2019 11:05:52 version 6.37.39.113 (r722271 CY)" from
cypress/cyfmac4339-sdio.bin) the RSSI respose is only 4 bytes, which
results in an error being logged.
It seems that older devices send only the RSSI field and neither SNR nor
noise is included. Handle this by accepting a 4 byte message and
reading only the RSSI from it.
Fixes: 7dd56ea45a66 ("brcmfmac: add support for CQM RSSI notifications")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230124104248.2917465-1-john@metanate.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Thu Apr 13 10:44:01 2023 +0300
wifi: iwlwifi: debug: fix crash in __iwl_err()
[ Upstream commit 634c7b1bd08ca322537ab389f8cbd7bb543b5e45 ]
In __iwl_err(), if we rate-limit the message away, then
vaf.va is still NULL-initialized by the time we get to
the tracing code, which then crashes. When it doesn't
get rate-limited out, it's still wrong to reuse the old
args2 that was already printed, which is why we bother
making a copy in the first place.
Assign vaf.va properly to fix this.
Fixes: e5f1cc98cc1b ("iwlwifi: allow rate-limited error messages")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.e27134c6bcd4.Ib3894cd2ba7a5ad5e75912a7634f146ceaa569e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gregory Greenman <gregory.greenman@intel.com>
Date: Mon Apr 10 17:07:21 2023 +0300
wifi: iwlwifi: fix duplicate entry in iwl_dev_info_table
[ Upstream commit fc3c2f0ed86b65dff4b6844c59c597b977cae533 ]
There're two identical entries for ax1650 device in
iwl_dev_info_table. Remove one of the duplicate entries.
Fixes: 953e66a7238b ("iwlwifi: add new ax1650 killer device")
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230410140721.897683-2-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Tue Apr 18 12:28:05 2023 +0300
wifi: iwlwifi: fw: fix memory leak in debugfs
[ Upstream commit 3d90d2f4a018fe8cfd65068bc6350b6222be4852 ]
Fix a memory leak that occurs when reading the fw_info
file all the way, since we return NULL indicating no
more data, but don't free the status tracking object.
Fixes: 36dfe9ac6e8b ("iwlwifi: dump api version in yaml format")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230418122405.239e501b3b8d.I4268f87809ef91209cbcd748eee0863195e70fa2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tom Rix <trix@redhat.com>
Date: Fri Apr 14 13:11:58 2023 +0300
wifi: iwlwifi: fw: move memset before early return
[ Upstream commit 8ce437dd5b2e4adef13aa4ecce07392f9966b1ab ]
Clang static analysis reports this representative issue
dbg.c:1455:6: warning: Branch condition evaluates to
a garbage value
if (!rxf_data.size)
^~~~~~~~~~~~~~
This check depends on iwl_ini_get_rxf_data() to clear
rxf_data but the function can return early without
doing the clear. So move the memset before the early
return.
Fixes: cc9b6012d34b ("iwlwifi: yoyo: use hweight_long instead of bit manipulating")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.872a7175f1ff.I33802a77a91998276992b088fbe25f61c87c33ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun Apr 16 15:47:38 2023 +0300
wifi: iwlwifi: make the loop for card preparation effective
[ Upstream commit 28965ec0b5d9112585f725660e2ff13218505ace ]
Since we didn't reset t to 0, only the first iteration of the loop
did checked the ready bit several times.
From the second iteration and on, we just tested the bit once and
continued to the next iteration.
Reported-and-tested-by: Lorenzo Zolfanelli <lorenzo@zolfa.nl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216452
Fixes: 289e5501c314 ("iwlwifi: fix the preparation of the card")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.615b683ab9c8.Ic52c3229d3345b0064fa34263293db095d88daf8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Mon Apr 17 11:41:33 2023 +0300
wifi: iwlwifi: mvm: check firmware response size
[ Upstream commit 13513cec93ac9902d0b896976d8bab3758a9881c ]
Check the firmware response size for responses to the
memory read/write command in debugfs before using it.
Fixes: 2b55f43f8e47 ("iwlwifi: mvm: Add mem debugfs entry")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.0d56fcaf68ee.I70e9571f3ed7263929b04f8fabad23c9b999e4ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ayala Beker <ayala.beker@intel.com>
Date: Thu Apr 13 21:40:22 2023 +0300
wifi: iwlwifi: mvm: don't drop unencrypted MCAST frames
[ Upstream commit 8e5a26360cbe29b896b6758518280d41c3704d43 ]
MCAST frames are filtered out by the driver if we are not
authorized yet.
Fix it to filter out only protected frames.
Fixes: 147eb05f24e6 ("iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSS")
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.9cedcc27db60.I8fb7057981392660da482dd215e85c15946d3f4b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Avraham Stern <avraham.stern@intel.com>
Date: Thu Apr 13 10:44:15 2023 +0300
wifi: iwlwifi: mvm: don't set CHECKSUM_COMPLETE for unsupported protocols
[ Upstream commit 217f3c52f00d3419ecdd38a99a7eceecb11679b2 ]
On Bz devices, CHECKSUM_COMPLETE was set for unsupported protocols
which results in a warning. Fix it.
Fixes: b6f5b647f694 ("iwlwifi: mvm: handle RX checksum on Bz devices")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.a2a35286f0ca.I50daa9445a6465514c44f5096c32adef64beba5f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Thu Apr 13 10:44:08 2023 +0300
wifi: iwlwifi: mvm: fix A-MSDU checks
[ Upstream commit d34d11aea2d5d71a66f2f90507c3f7202b964175 ]
Since Gl A-step devices use the old checksum hardware,
we shouldn't use the Bz code to check for A-MSDU
combining ability; fix that.
Fixes: ec18e7d4d20d ("wifi: iwlwifi: mvm: use old checksum for Bz A-step")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.8c445b943fee.Ibf772102ca712f59e2ee0cdd4c344011fcf445aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tom Rix <trix@redhat.com>
Date: Fri Apr 14 13:11:57 2023 +0300
wifi: iwlwifi: mvm: initialize seq variable
[ Upstream commit 11e94d2bcd88dea5d9ce99555b6b172f5232d3e2 ]
Clang static analysis reports this issue
d3.c:567:22: warning: The left operand of '>' is
a garbage value
if (seq.tkip.iv32 > cur_rx_iv32)
~~~~~~~~~~~~~ ^
seq is never initialized. Call ieee80211_get_key_rx_seq() to
initialize seq.
Fixes: 0419e5e672d6 ("iwlwifi: mvm: d3: separate TKIP data from key iteration")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.6dd372f84f93.If1f708c90e6424a935b4eba3917dfb7582e0dd0a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Avraham Stern <avraham.stern@intel.com>
Date: Thu Apr 13 10:44:14 2023 +0300
wifi: iwlwifi: trans: don't trigger d3 interrupt twice
[ Upstream commit 277f56a141fc54ef7f9e09dba65fb2e12021411d ]
When the IPC registers are used for sleep control, setting
the IPC sleep bit already triggers an interrupt to the fw, so
there is no need to also set the doorbell. Setting also the
doorbell triggers the sleep interrupt twice which lead to
an assert.
Fixes: af08571d3925 ("iwlwifi: pcie: support Bz suspend/resume trigger")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.b5f2f6e44d38.I4cb5b6ad4914db47a714e731c4c8b4db679cabce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Gabay <daniel.gabay@intel.com>
Date: Thu Apr 13 21:40:34 2023 +0300
wifi: iwlwifi: yoyo: Fix possible division by zero
[ Upstream commit ba30415118eee374a08b39a0460a1d1e52c24a25 ]
Don't allow buffer allocation TLV with zero req_size since it
leads later to division by zero in iwl_dbg_tlv_alloc_fragments().
Also, NPK/SRAM locations are allowed to have zero buffer req_size,
don't discard them.
Fixes: a9248de42464 ("iwlwifi: dbg_ini: add TLV allocation new API support")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.5d6688ed74d8.I5c2f3a882b50698b708d54f4524dc5bdf11e3d32@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Gabay <daniel.gabay@intel.com>
Date: Thu Apr 13 21:40:33 2023 +0300
wifi: iwlwifi: yoyo: skip dump correctly on hw error
[ Upstream commit 11195ab0d6f3202cf7af1a4c69570f59c377d8ad ]
When NIC is in a bad state, reading data will return 28 bits as
0xa5a5a5a and the lowest 4 bits are not fixed value.
Mask these bits in a few places to skip the dump correctly.
Fixes: 89639e06d0f3 ("iwlwifi: yoyo: support for new DBGI_SRAM region")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.df6c0663179d.I36d8487b2419c6fefa65e5514855d94327c3b1eb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Deren Wu <deren.wu@mediatek.com>
Date: Sat Jan 14 12:56:46 2023 +0800
wifi: mt76: add flexible polling wait-interval support
[ Upstream commit 35effe6c0c24adcf0f732bb1c3d75573d4c88e63 ]
The default waiting unit is 10ms and the value is too much for
data path related control. Provide a new API mt76_poll_msec_tick()
to support different cases, such as 1ms polling waiting kick.
Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: c397fc1e6365 ("wifi: mt76: mt7921e: fix probe timeout after reboot")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Felix Fietkau <nbd@nbd.name>
Date: Fri Apr 14 14:10:54 2023 +0200
wifi: mt76: add missing locking to protect against concurrent rx/status calls
commit 5b8ccdfb943f6a03c676d2ea816dd38c149e920b upstream.
According to the documentation, ieee80211_rx_list must not run concurrently
with ieee80211_tx_status (or its variants).
Cc: stable@vger.kernel.org
Fixes: 88046b2c9f6d ("mt76: add support for reporting tx status with skb")
Reported-by: Brian Coverstone <brian@mainsequence.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ryder Lee <ryder.lee@mediatek.com>
Date: Fri Apr 14 04:23:29 2023 +0800
wifi: mt76: connac: fix txd multicast rate setting
[ Upstream commit 3d2892e05086d09aecf14ea64b2debbf495e313c ]
The vif->bss_conf.mcast_rate should be applied to multicast data frame
only.
Fixes: 182071cdd594 ("mt76: connac: move connac2_mac_write_txwi in mt76_connac module")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Date: Thu Mar 23 21:26:12 2023 +0800
wifi: mt76: fix 6GHz high channel not be scanned
[ Upstream commit 23792cedaff02351b57bddd8957fc917fa88f2e0 ]
mt76 scan command only support 64 channels currently. If the
channel count is larger than 64(for 2+5+6GHz), some channels will
not be scanned. Hence change the scan type to full channel scan
in case of the command cannot include proper list for chip.
Fixes: 399090ef9605 ("mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu module")
Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Isaac Konikoff <konikofi@candelatech.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kang Chen <void0red@gmail.com>
Date: Mon Feb 27 22:48:23 2023 +0800
wifi: mt76: handle failure of vzalloc in mt7615_coredump_work
[ Upstream commit 9e47dd9f64a47ae00ca0123017584c37209ee900 ]
vzalloc may fails, dump might be null and will cause
illegal address access later.
Link: https://lore.kernel.org/all/Y%2Fy5Asxw3T3m4jCw@lore-desk
Fixes: d2bf7959d9c0 ("mt76: mt7663: introduce coredump support")
Signed-off-by: Kang Chen <void0red@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Howard Hsu <howard-yh.hsu@mediatek.com>
Date: Wed Dec 14 10:28:09 2022 +0800
wifi: mt76: mt7915: add error message in mt7915_thermal_set_cur_throttle_state()
[ Upstream commit 2f2d86309e228adfe658c9c0a23c726d8b3ce475 ]
Add dev_err so that it is easier to see invalid setting while looking at
dmesg.
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: 9c97df11dfe6 ("wifi: mt76: mt7915: rework init flow in mt7915_thermal_init()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lorenz Brun <lorenz@brun.one>
Date: Sat Feb 18 12:29:45 2023 +0100
wifi: mt76: mt7915: expose device tree match table
[ Upstream commit 90fb69212c60e26ef70ed0e8532b116c7649ac88 ]
On MT7986 the WiFi driver currently does not get automatically loaded,
requiring manual modprobing because the device tree compatibles are not
exported into metadata.
Add the missing MODULE_DEVICE_TABLE macro to fix this.
Fixes: 99ad32a4ca3a2 ("mt76: mt7915: add support for MT7986")
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Howard Hsu <howard-yh.hsu@mediatek.com>
Date: Thu Feb 23 14:24:57 2023 +0800
wifi: mt76: mt7915: rework init flow in mt7915_thermal_init()
[ Upstream commit 9c97df11dfe68b548a47744ba9fa6beddcfba2bc ]
If kernel do not enable CONFIG_HWMON, it may cause thermal
initialization to be done with temperature value 0 and then can not
transmit. This commit fixes it by setting trigger/restore temperature
before checking CONFIG_HWMON.
Fixes: 7d12b38ab6f6 ("wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <error27@gmail.com>
Date: Thu Feb 16 15:15:05 2023 +0300
wifi: mt76: mt7915: unlock on error in mt7915_thermal_temp_store()
[ Upstream commit cdc215c2c8d74b3c8886650e979b47f16c1f7f92 ]
Drop the lock before returning -EINVAL.
Fixes: ecaccdae7a7e ("wifi: mt76: mt7915: rework mt7915_thermal_temp_store()")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiefeng Li <jiefeng_li@hust.edu.cn>
Date: Wed Apr 12 14:22:34 2023 +0800
wifi: mt76: mt7921: fix missing unwind goto in `mt7921u_probe`
[ Upstream commit 5c47cdebbaeb7724df6f9f46917c93e53f791547 ]
`mt7921u_dma_init` can only return zero or negative number according to its
definition. When it returns non-zero number, there exists an error and this
function should handle this error rather than return directly.
Fixes: 0d2afe09fad5 ("mt76: mt7921: add mt7921u driver")
Signed-off-by: Jiefeng Li <jiefeng_li@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Deren Wu <deren.wu@mediatek.com>
Date: Tue Feb 14 10:49:57 2023 +0800
wifi: mt76: mt7921: fix PCI DMA hang after reboot
[ Upstream commit 9270270d62191b7549296721e8d5f3dc0df01563 ]
mt7921 just stop some workers and clean up chip status before reboot.
In stress test, there are working activities still running at the period
of .shutdown callback and that would cause some hosts cannot recover
DMA after reboot. To avoid the floating state in reboot, we use
mt7921_pci_remove() to fully deinit all resources.
Fixes: f23a0cea8bd6 ("wifi: mt76: mt7921e: add pci .shutdown() support")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ben Greear <greearb@candelatech.com>
Date: Wed Mar 22 17:37:17 2023 +0100
wifi: mt76: mt7921: Fix use-after-free in fw features query.
[ Upstream commit 2ceb76f734e37833824b7fab6af17c999eb48d2b ]
Stop referencing 'features' memory after release_firmware is called.
Fixes this crash:
RIP: 0010:mt7921_check_offload_capability+0x17d
mt7921_pci_probe+0xca/0x4b0
...
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/51fd8f76494348aa9ecbf0abc471ebe47a983dfd.1679502607.git.lorenzo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Deren Wu <deren.wu@mediatek.com>
Date: Sat Feb 11 09:01:58 2023 +0800
wifi: mt76: mt7921: fix wrong command to set STA channel
[ Upstream commit fcc51acfebb85dbc3ab1bea3ce4997d7c0a3a38d ]
Should not use AND operator to check vif type NL80211_IFTYPE_MONITOR, and
that will cause we go into sniffer command for both STA and MONITOR
mode. However, the sniffer command would set channel properly (with some
extra options), the STA mode still works even if using the wrong
command.
Fix vif type check to make sure we using the right command to update
channel.
Fixes: 914189af23b8 ("wifi: mt76: mt7921: fix channel switch fail in monitor mode")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Quan Zhou <quan.zhou@mediatek.com>
Date: Sat Mar 18 15:41:12 2023 +0800
wifi: mt76: mt7921e: fix probe timeout after reboot
[ Upstream commit c397fc1e6365a2a9e5540a85b2c1d4ea412aa0e2 ]
In system warm reboot scene, due to the polling timeout(now 1000us)
is too short to wait dma idle in time, it may make driver probe fail
with error code -ETIMEDOUT. Meanwhile, we also found the dma may take
around 70ms to enter idle state. Change the polling idle timeout to
100ms to avoid the probabilistic probe fail.
Tested pass with 5000 times warm reboot on x86 platform.
[4.477496] pci 0000:01:00.0: attach allowed to drvr mt7921e [internal device]
[4.478306] mt7921e 0000:01:00.0: ASIC revision: 79610010
[4.480063] mt7921e: probe of 0000:01:00.0 failed with error -110
Fixes: 0a1059d0f060 ("mt76: mt7921: move mt7921_dma_reset in dma.c")
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Quan Zhou <quan.zhou@mediatek.com>
Date: Thu Apr 13 05:11:13 2023 +0800
wifi: mt76: mt7921e: improve reliability of dma reset
[ Upstream commit 87714bf6ed1589813e473db5471e6e9857755764 ]
The hardware team has advised the driver that it is necessary to first put
WFDMA into an idle state before resetting the WFDMA. Otherwise, the WFDMA
may enter an unknown state where it cannot be polled with the right state
successfully. To ensure that the DMA can work properly while a stressful
cold reboot test was being made, we have reordered the programming sequence
in the driver based on the hardware team's guidance.
The patch would modify the WFDMA disabling flow from
"DMA reset -> disabling DMASHDL -> disabling WFDMA -> polling and waiting
until DMA idle" to "disabling WFDMA -> polling and waiting for DMA idle ->
disabling DMASHDL -> DMA reset.
Where he polling and waiting until WFDMA is idle is coordinated with the
operation of disabling WFDMA. Even while WFDMA is being disabled, it can
still handle Tx/Rx requests. The additional polling allows sufficient time
for WFDMA to process the last T/Rx request. When the idle state of WFDMA is
reached, it is a reliable indication that DMASHDL is also idle to ensure it
is safe to disable it and perform the DMA reset.
Fixes: 0a1059d0f060 ("mt76: mt7921: move mt7921_dma_reset in dma.c")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Co-developed-by: Wang Zhao <wang.zhao@mediatek.com>
Signed-off-by: Wang Zhao <wang.zhao@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Wed Mar 29 14:57:58 2023 -0500
wifi: mt76: mt7921e: Set memory space enable in PCI_COMMAND if unset
commit 09d4d6da1b65d09414e7bce61459593f3c80ead1 upstream.
When the BIOS has been configured for Fast Boot, systems with mt7921e
have non-functional wifi. Turning on Fast boot caused both bus master
enable and memory space enable bits in PCI_COMMAND not to get configured.
The mt7921 driver already sets bus master enable, but explicitly check
and set memory access enable as well to fix this problem.
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Quan Zhou <quan.zhou@mediatek.com>
Date: Thu Apr 13 05:11:14 2023 +0800
wifi: mt76: mt7921e: stop chip reset worker in unregister hook
[ Upstream commit 3d78c46423c6567ed25ca033e086865b1b4d5ae1 ]
If the chip reset worker is triggered during the remove process, the chip
DMA may not be properly pushed back to the idle state. This can lead to
corruption of the DMA flow due to the chip reset. Therefore, it is
necessary to stop the chip reset before the DMA is finalized.
To avoid resetting the chip after the reset worker is cancelled, use
__mt7921_mcu_drv_pmctrl() instead of mt7921_mcu_drv_pmctrl(). It is safe to
ignore the pm mutex because the pm worker and wake worker have already been
cancelled.
Fixes: 033ae79b3830 ("mt76: mt7921: refactor init.c to be bus independent")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Co-developed-by: Wang Zhao <wang.zhao@mediatek.com>
Signed-off-by: Wang Zhao <wang.zhao@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ryder Lee <ryder.lee@mediatek.com>
Date: Wed Apr 19 13:58:40 2023 +0800
wifi: mt76: mt7996: fill txd by host driver
[ Upstream commit 3b522cadedfe6e9e0e8193d7d4ab5aa8d0c73209 ]
The hardware SDO has issue to fill txd for the moment, so fallback to
driver filling method.
Fixes: 98686cd21624 (wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices)
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Date: Fri Mar 3 16:35:58 2023 +0800
wifi: mt76: mt7996: fix eeprom tx path bitfields
[ Upstream commit 72fc0df3006ce5c109f9c68f0724e44c47b4ec7b ]
Swap the tx path bitfields of band1 and band2 to read correct setting.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Chiu <chui-hao.chiu@mediatek.com>
Date: Fri Mar 3 16:35:55 2023 +0800
wifi: mt76: mt7996: fix pointer calculation in ie countdown event
[ Upstream commit 8b14ce24a0297175bc4ebdf26d45a22b5a33847f ]
Fix the tail and data pointers. The rxd->len in mt7996_mcu_rxd does not
include the length of general rxd. It only includes the length of
firmware event rxd. Use skb->length to get the correct length.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ryder Lee <ryder.lee@mediatek.com>
Date: Sat Feb 18 01:46:54 2023 +0800
wifi: mt76: mt7996: fix radiotap bitfield
[ Upstream commit 63a3724632464559d1e98d90d2c63d43ec6ef6f5 ]
The 11be generation's radiotap bitfields were wrongly copy-and-pasted
from 11ax driver, so fix them accordingly.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shayne Chen <shayne.chen@mediatek.com>
Date: Fri Mar 3 16:35:53 2023 +0800
wifi: mt76: mt7996: let non-bufferable MMPDUs use correct hw queue
[ Upstream commit d0b6f86fdbefa62fd4ad2acd1aea6c45f9b518ba ]
Pass qid into mt7996_mac_write_txwi() to let the tx descriptor of
non-bufferable MMPDUs be filled with correct hw queue index.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Wed Jan 18 17:30:38 2023 +0100
wifi: mt76: mt7996: rely on mt76_connac_txp_common structure
[ Upstream commit 3c38dfc1702d812f7c4a89ed5b0521e2ad8381d6 ]
mt7996_txp structure is equal to mt76_connac_fw_txp one. Drop mt7996_txp
and rely on mt76_connac_txp_common.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: 3b522cadedfe ("wifi: mt76: mt7996: fill txd by host driver")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Deren Wu <deren.wu@mediatek.com>
Date: Sat Feb 4 14:53:04 2023 +0800
wifi: mt76: remove redundent MCU_UNI_CMD_* definitions
[ Upstream commit 532f0482fc577a78c0086893ab39acb406ac3e65 ]
clear redundent definitions only
Fixes: 5b55b6da982c ("wifi: mt76: mt7921: add unified ROC cmd/event support")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Armin Wolf <W_Armin@gmx.de>
Date: Thu Mar 30 23:56:37 2023 +0200
wifi: rt2x00: Fix memory leak when handling surveys
[ Upstream commit cbef9a83c51dfcb07f77cfa6ac26f53a1ea86f49 ]
When removing a rt2x00 device, its associated channel surveys
are not freed, causing a memory leak observable with kmemleak:
unreferenced object 0xffff9620f0881a00 (size 512):
comm "systemd-udevd", pid 2290, jiffies 4294906974 (age 33.768s)
hex dump (first 32 bytes):
70 44 12 00 00 00 00 00 92 8a 00 00 00 00 00 00 pD..............
00 00 00 00 00 00 00 00 ab 87 01 00 00 00 00 00 ................
backtrace:
[<ffffffffb0ed858b>] __kmalloc+0x4b/0x130
[<ffffffffc1b0f29b>] rt2800_probe_hw+0xc2b/0x1380 [rt2800lib]
[<ffffffffc1a9496e>] rt2800usb_probe_hw+0xe/0x60 [rt2800usb]
[<ffffffffc1ae491a>] rt2x00lib_probe_dev+0x21a/0x7d0 [rt2x00lib]
[<ffffffffc1b3b83e>] rt2x00usb_probe+0x1be/0x980 [rt2x00usb]
[<ffffffffc05981e2>] usb_probe_interface+0xe2/0x310 [usbcore]
[<ffffffffb13be2d5>] really_probe+0x1a5/0x410
[<ffffffffb13be5c8>] __driver_probe_device+0x78/0x180
[<ffffffffb13be6fe>] driver_probe_device+0x1e/0x90
[<ffffffffb13be972>] __driver_attach+0xd2/0x1c0
[<ffffffffb13bbc57>] bus_for_each_dev+0x77/0xd0
[<ffffffffb13bd2a2>] bus_add_driver+0x112/0x210
[<ffffffffb13bfc6c>] driver_register+0x5c/0x120
[<ffffffffc0596ae8>] usb_register_driver+0x88/0x150 [usbcore]
[<ffffffffb0c011c4>] do_one_initcall+0x44/0x220
[<ffffffffb0d6134c>] do_init_module+0x4c/0x220
Fix this by freeing the channel surveys on device removal.
Tested with a RT3070 based USB wireless adapter.
Fixes: 5447626910f5 ("rt2x00: save survey for every channel visited")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330215637.4332-1-W_Armin@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Date: Fri Feb 17 20:49:12 2023 +0200
wifi: rtl8xxxu: Remove always true condition in rtl8xxxu_print_chipinfo
[ Upstream commit b9b1e4fe2957f361c86e288ecf373dc7895cf7c7 ]
Fix a new smatch warning:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:1580 rtl8xxxu_print_chipinfo() warn: always true condition '(priv->chip_cut <= 15) => (0-15 <= 15)'
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302140753.71IgU77A-lkp@intel.com/
Fixes: 7b0ac469e331 ("wifi: rtl8xxxu: Recognise all possible chip cuts")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/68eff98b-a022-5a00-f330-adf623a35772@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Date: Mon Mar 13 15:42:59 2023 +0200
wifi: rtl8xxxu: RTL8192EU always needs full init
commit d46e04ccd40457a0119b76e11ab64a2ad403e138 upstream.
Always run the entire init sequence (rtl8xxxu_init_device()) for
RTL8192EU. It's what the vendor driver does too.
This fixes a bug where the device is unable to connect after
rebooting:
wlp3s0f3u2: send auth to ... (try 1/3)
wlp3s0f3u2: send auth to ... (try 2/3)
wlp3s0f3u2: send auth to ... (try 3/3)
wlp3s0f3u2: authentication with ... timed out
Rebooting leaves the device powered on (partially? at least the
firmware is still running), but not really in a working state.
Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/4eb111a9-d4c4-37d0-b376-4e202de7153c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wei Chen <harperchen1110@gmail.com>
Date: Sun Mar 26 05:42:17 2023 +0000
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg()
[ Upstream commit 5dbe1f8eb8c5ac69394400a5b86fd81775e96c43 ]
If there is a failure during copy_from_user or user-provided data buffer is
invalid, rtl_debugfs_set_write_reg should return negative error code instead
of a positive value count.
Fix this bug by returning correct error code. Moreover, the check of buffer
against null is removed since it will be handled by copy_from_user.
Fixes: 610247f46feb ("rtlwifi: Improve debugging by using debugfs")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230326054217.93492-1-harperchen1110@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wei Chen <harperchen1110@gmail.com>
Date: Sun Mar 26 05:31:38 2023 +0000
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg()
[ Upstream commit 905a9241e4e8c15d2c084fee916280514848fe35 ]
If there is a failure during copy_from_user or user-provided data buffer
is invalid, rtl_debugfs_set_write_rfreg should return negative error code
instead of a positive value count.
Fix this bug by returning correct error code. Moreover, the check of buffer
against null is removed since it will be handled by copy_from_user.
Fixes: 610247f46feb ("rtlwifi: Improve debugging by using debugfs")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230326053138.91338-1-harperchen1110@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Sun Feb 26 23:10:04 2023 +0100
wifi: rtw88: mac: Return the original error from rtw_mac_power_switch()
[ Upstream commit 15c8e267dfa62f207ee1db666c822324e3362b84 ]
rtw_mac_power_switch() calls rtw_pwr_seq_parser() which can return
-EINVAL, -EBUSY or 0. Propagate the original error code instead of
unconditionally returning -EINVAL in case of an error.
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230226221004.138331-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Sun Feb 26 23:10:03 2023 +0100
wifi: rtw88: mac: Return the original error from rtw_pwr_seq_parser()
[ Upstream commit b7ed9fa2cb76ca7a3c3cd4a6d35748fe1fbda9f6 ]
rtw_pwr_seq_parser() calls rtw_sub_pwr_seq_parser() which can either
return -EBUSY, -EINVAL or 0. Propagate the original error code instead
of unconditionally returning -EBUSY in case of an error.
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230226221004.138331-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon Apr 17 16:03:56 2023 +0200
wifi: rtw88: rtw8821c: Fix rfe_option field width
commit 14705f969d98187a1cc2682e0c9bd2e230b8098f upstream.
On my RTW8821CU chipset rfe_option reads as 0x22. Looking at the
vendor driver suggests that the field width of rfe_option is 5 bit,
so rfe_option should be masked with 0x1f.
Without this the rfe_option comparisons with 2 further down the
driver evaluate as false when they should really evaluate as true.
The effect is that 2G channels do not work.
rfe_option is also used as an array index into rtw8821c_rfe_defs[].
rtw8821c_rfe_defs[34] (0x22) was added as part of adding USB support,
likely because rfe_option reads as 0x22. As this now becomes 0x2,
rtw8821c_rfe_defs[34] is no longer used and can be removed.
Note that this might not be the whole truth. In the vendor driver
there are indeed places where the unmasked rfe_option value is used.
However, the driver has several places where rfe_option is tested
with the pattern if (rfe_option == 2 || rfe_option == 0x22) or
if (rfe_option == 4 || rfe_option == 0x24), so that rfe_option BIT(5)
has no influence on the code path taken. We therefore mask BIT(5)
out from rfe_option entirely until this assumption is proved wrong
by some chip variant we do not know yet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Alexandru gagniuc <mr.nuke.me@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: ValdikSS <iam@valdikss.org.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230417140358.2240429-3-s.hauer@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon Apr 17 16:03:55 2023 +0200
wifi: rtw88: usb: fix priority queue to endpoint mapping
commit a6f187f92bcc2b17821538b4a11d61764e68b091 upstream.
The RTW88 chipsets have four different priority queues in hardware. For
the USB type chipsets the packets destined for a specific priority queue
must be sent through the endpoint corresponding to the queue. This was
not fully understood when porting from the RTW88 USB out of tree driver
and thus violated.
This patch implements the qsel to endpoint mapping as in
get_usb_bulkout_id_88xx() in the downstream driver.
Without this the driver often issues "timed out to flush queue 3"
warnings and often TX stalls completely.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: ValdikSS <iam@valdikss.org.ru>
Tested-by: Alexandru gagniuc <mr.nuke.me@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable@vger.kernel.org
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230417140358.2240429-2-s.hauer@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Huang <echuang@realtek.com>
Date: Thu Apr 6 15:28:41 2023 +0800
wifi: rtw89: correct 5 MHz mask setting
commit d33fc8d0368c180fe2338bfae4f5367a66a719f4 upstream.
Use primary channel index to determine which 5 MHz mask should be enable.
This mask is used to prevent noise from channel edge to effect CCA
threshold in wide bandwidth (>= 40 MHZ).
Fixes: 1b00e9236a71 ("rtw89: 8852c: add set channel of BB part")
Fixes: 6b0698984eb0 ("wifi: rtw89: 8852b: add chip_ops::set_channel")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230406072841.8308-1-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ping-Ke Shih <pkshih@realtek.com>
Date: Thu Mar 23 16:28:39 2023 +0800
wifi: rtw89: fix potential race condition between napi_init and napi_enable
commit 47515664ecfbde11425dff121f298ae4499425c9 upstream.
A race condition can happen if netdev is registered, but NAPI isn't
initialized yet, and meanwhile user space starts the netdev that will
enable NAPI. Then, it hits BUG_ON():
kernel BUG at net/core/dev.c:6423!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 417 Comm: iwd Not tainted 6.2.7-slab-dirty #3 eb0f5a8a9d91
Hardware name: LENOVO 21DL/LNVNB161216, BIOS JPCN20WW(V1.06) 09/20/2022
RIP: 0010:napi_enable+0x3f/0x50
Code: 48 89 c2 48 83 e2 f6 f6 81 89 08 00 00 02 74 0d 48 83 ...
RSP: 0018:ffffada1414f3548 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa01425802080 RCX: 0000000000000000
RDX: 00000000000002ff RSI: ffffada14e50c614 RDI: ffffa01425808dc0
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000100 R12: ffffa01425808f58
R13: 0000000000000000 R14: ffffa01423498940 R15: 0000000000000001
FS: 00007f5577c0a740(0000) GS:ffffa0169fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5577a19972 CR3: 0000000125a7a000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
rtw89_pci_ops_start+0x1c/0x70 [rtw89_pci 6cbc75429515c181cbc386478d5cfb32ffc5a0f8]
rtw89_core_start+0xbe/0x160 [rtw89_core fe07ecb874820b6d778370d4acb6ef8a37847f22]
rtw89_ops_start+0x26/0x40 [rtw89_core fe07ecb874820b6d778370d4acb6ef8a37847f22]
drv_start+0x42/0x100 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2]
ieee80211_do_open+0x311/0x7d0 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2]
ieee80211_open+0x6a/0x90 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2]
__dev_open+0xe0/0x180
__dev_change_flags+0x1da/0x250
dev_change_flags+0x26/0x70
do_setlink+0x37c/0x12c0
? ep_poll_callback+0x246/0x290
? __nla_validate_parse+0x61/0xd00
? __wake_up_common_lock+0x8f/0xd0
To fix this, follow Jonas' suggestion to switch the order of these
functions and move register netdev to be the last step of PCI probe.
Also, correct the error handling of rtw89_core_register_hw().
Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Cc: stable@vger.kernel.org
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/linux-wireless/CAOiHx=n7EwK2B9CnBR07FVA=sEzFagb8TkS4XC_qBNq8OwcYUg@mail.gmail.com/T/#t
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Larry Finger<Larry.Finger@lwfinger.net>
Reviewed-by: Larry Finger<Larry.Finger@lwfinger.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230323082839.20474-1-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Petr Mladek <pmladek@suse.com>
Date: Tue Mar 7 13:53:31 2023 +0100
workqueue: Fix hung time report of worker pools
[ Upstream commit 335a42ebb0ca8ee9997a1731aaaae6dcd704c113 ]
The workqueue watchdog prints a warning when there is no progress in
a worker pool. Where the progress means that the pool started processing
a pending work item.
Note that it is perfectly fine to process work items much longer.
The progress should be guaranteed by waking up or creating idle
workers.
show_one_worker_pool() prints state of non-idle worker pool. It shows
a delay since the last pool->watchdog_ts.
The timestamp is updated when a first pending work is queued in
__queue_work(). Also it is updated when a work is dequeued for
processing in worker_thread() and rescuer_thread().
The delay is misleading when there is no pending work item. In this
case it shows how long the last work item is being proceed. Show
zero instead. There is no stall if there is no pending work.
Fixes: 82607adcf9cdf40fb7b ("workqueue: implement lockup detector")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uros Bizjak <ubizjak@gmail.com>
Date: Mon Feb 27 17:09:17 2023 +0100
x86/apic: Fix atomic update of offset in reserve_eilvt_offset()
[ Upstream commit f96fb2df3eb31ede1b34b0521560967310267750 ]
The detection of atomic update failure in reserve_eilvt_offset() is
not correct. The value returned by atomic_cmpxchg() should be compared
to the old value from the location to be updated.
If these two are the same, then atomic update succeeded and
"eilvt_offsets[offset]" location is updated to "new" in an atomic way.
Otherwise, the atomic update failed and it should be retried with the
value from "eilvt_offsets[offset]" - exactly what atomic_try_cmpxchg()
does in a correct and more optimal way.
Fixes: a68c439b1966c ("apic, x86: Check if EILVT APIC registers are available (AMD only)")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230227160917.107820-1-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Luck <tony.luck@intel.com>
Date: Tue Apr 4 10:46:41 2023 -0700
x86/cpu: Add model number for Intel Arrow Lake processor
[ Upstream commit 81515ecf155a38f3532bf5ddef88d651898df6be ]
Successor to Lunar Lake.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230404174641.426593-1-tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Kelley <mikelley@microsoft.com>
Date: Wed Mar 15 08:34:13 2023 -0700
x86/hyperv: Block root partition functionality in a Confidential VM
[ Upstream commit f8acb24aaf89fc46cd953229462ea8abe31b395f ]
Hyper-V should never specify a VM that is a Confidential VM and also
running in the root partition. Nonetheless, explicitly block such a
combination to guard against a compromised Hyper-V maliciously trying to
exploit root partition functionality in a Confidential VM to expose
Confidential VM secrets. No known bug is being fixed, but the attack
surface for Confidential VMs on Hyper-V is reduced.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1678894453-95392-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Saurabh Sengar <ssengar@linux.microsoft.com>
Date: Tue Mar 28 00:30:04 2023 -0700
x86/ioapic: Don't return 0 from arch_dynirq_lower_bound()
[ Upstream commit 5af507bef93c09a94fb8f058213b489178f4cbe5 ]
arch_dynirq_lower_bound() is invoked by the core interrupt code to
retrieve the lowest possible Linux interrupt number for dynamically
allocated interrupts like MSI.
The x86 implementation uses this to exclude the IO/APIC GSI space.
This works correctly as long as there is an IO/APIC registered, but
returns 0 if not. This has been observed in VMs where the BIOS does
not advertise an IO/APIC.
0 is an invalid interrupt number except for the legacy timer interrupt
on x86. The return value is unchecked in the core code, so it ends up
to allocate interrupt number 0 which is subsequently considered to be
invalid by the caller, e.g. the MSI allocation code.
The function has already a check for 0 in the case that an IO/APIC is
registered, as ioapic_dynirq_base is 0 in case of device tree setups.
Consolidate this and zero check for both ioapic_dynirq_base and gsi_top,
which is used in the case that no IO/APIC is registered.
Fixes: 3e5bedc2c258 ("x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1679988604-20308-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Muralidhara M K <muralimk@amd.com>
Date: Fri Jan 27 15:16:01 2023 +0000
x86/MCE/AMD: Use an u64 for bank_map
[ Upstream commit 4c1cdec319b9aadb65737c3eb1f5cb74bd6aa156 ]
Thee maximum number of MCA banks is 64 (MAX_NR_BANKS), see
a0bc32b3cacf ("x86/mce: Increase maximum number of banks to 64").
However, the bank_map which contains a bitfield of which banks to
initialize is of type unsigned int and that overflows when those bit
numbers are >= 32, leading to UBSAN complaining correctly:
UBSAN: shift-out-of-bounds in arch/x86/kernel/cpu/mce/amd.c:1365:38
shift exponent 32 is too large for 32-bit type 'int'
Change the bank_map to a u64 and use the proper BIT_ULL() macro when
modifying bits in there.
[ bp: Rewrite commit message. ]
Fixes: a0bc32b3cacf ("x86/mce: Increase maximum number of banks to 64")
Signed-off-by: Muralidhara M K <muralimk@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127151601.1068324-1-muralimk@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Chinner <dchinner@redhat.com>
Date: Wed Apr 12 15:48:50 2023 +1000
xfs: don't consider future format versions valid
commit aa88019851a85df80cb77f143758b13aee09e3d9 upstream.
In commit fe08cc504448 we reworked the valid superblock version
checks. If it is a V5 filesystem, it is always valid, then we
checked if the version was less than V4 (reject) and then checked
feature fields in the V4 flags to determine if it was valid.
What we missed was that if the version is not V4 at this point,
we shoudl reject the fs. i.e. the check current treats V6+
filesystems as if it was a v4 filesystem. Fix this.
cc: stable@vger.kernel.org
Fixes: fe08cc504448 ("xfs: open code sb verifier feature checks")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Johan Hovold <johan+linaro@kernel.org>
Date: Wed Apr 5 11:03:42 2023 +0200
xhci: fix debugfs register accesses while suspended
commit 735baf1b23458f71a8b15cb924af22c9ff9cd125 upstream.
Wire up the debugfs regset device pointer so that the controller is
resumed before accessing registers to avoid crashing or locking up if it
happens to be runtime suspended.
Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver")
Cc: stable@vger.kernel.org # 4.15: 30332eeefec8: debugfs: regset32: Add Runtime PM support
Cc: stable@vger.kernel.org # 4.15
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230405090342.7363-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kal Conley <kal.conley@dectris.com>
Date: Thu Apr 6 01:59:18 2023 +0200
xsk: Fix unaligned descriptor validation
[ Upstream commit d769ccaf957fe7391f357c0a923de71f594b8a2b ]
Make sure unaligned descriptors that straddle the end of the UMEM are
considered invalid. Currently, descriptor validation is broken for
zero-copy mode which only checks descriptors at page granularity.
For example, descriptors in zero-copy mode that overrun the end of the
UMEM but not a page boundary are (incorrectly) considered valid. The
UMEM boundary check needs to happen before the page boundary and
contiguity checks in xp_desc_crosses_non_contig_pg(). Do this check in
xp_unaligned_validate_desc() instead like xp_check_unaligned() already
does.
Fixes: 2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230405235920.7305-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>