Author: Murad Masimov <m.masimov@mt-integration.ru>
Date: Thu Jan 23 19:39:45 2025 +0300
acpi: nfit: fix narrowing conversion in acpi_nfit_ctl
commit 2ff0e408db36c21ed3fa5e3c1e0e687c82cf132f upstream.
Syzkaller has reported a warning in to_nfit_bus_uuid(): "only secondary
bus families can be translated". This warning is emited if the argument
is equal to NVDIMM_BUS_FAMILY_NFIT == 0. Function acpi_nfit_ctl() first
verifies that a user-provided value call_pkg->nd_family of type u64 is
not equal to 0. Then the value is converted to int, and only after that
is compared to NVDIMM_BUS_FAMILY_MAX. This can lead to passing an invalid
argument to acpi_nfit_ctl(), if call_pkg->nd_family is non-zero, while
the lower 32 bits are zero.
Furthermore, it is best to return EINVAL immediately upon seeing the
invalid user input. The WARNING is insufficient to prevent further
undefined behavior based on other invalid user input.
All checks of the input value should be applied to the original variable
call_pkg->nd_family.
[iweiny: update commit message]
Fixes: 6450ddbd5d8e ("ACPI: NFIT: Define runtime firmware activation commands")
Cc: stable@vger.kernel.org
Reported-by: syzbot+c80d8dc0d9fa81a3cd8c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c80d8dc0d9fa81a3cd8c
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250123163945.251-1-m.masimov@mt-integration.ru
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Giovanni Gherdovich <ggherdovich@suse.cz>
Date: Fri Mar 28 15:30:39 2025 +0100
ACPI: processor: idle: Return an error if both P_LVL{2,3} idle states are invalid
[ Upstream commit 9e9b893404d43894d69a18dd2fc8fcf1c36abb7e ]
Prior to commit 496121c02127 ("ACPI: processor: idle: Allow probing on
platforms with one ACPI C-state"), the acpi_idle driver wouldn't load on
systems without a valid C-State at least as deep as C2.
The behavior was desirable for guests on hypervisors such as VMWare
ESXi, which by default don't have the _CST ACPI method, and set the C2
and C3 latencies to 101 and 1001 microseconds respectively via the FADT,
to signify they're unsupported.
Since the above change though, these virtualized deployments end up
loading acpi_idle, and thus entering the default C1 C-State set by
acpi_processor_get_power_info_default(); this is undesirable for a
system that's communicating to the OS it doesn't want C-States (missing
_CST, and invalid C2/C3 in FADT).
Make acpi_processor_get_power_info_fadt() return -ENODEV in that case,
so that acpi_processor_get_cstate_info() exits early and doesn't set
pr->flags.power = 1.
Fixes: 496121c02127 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state")
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250328143040.9348-1-ggherdovich@suse.cz
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gannon Kolding <gannon.kolding@gmail.com>
Date: Mon Jan 27 02:39:02 2025 -0700
ACPI: resource: IRQ override for Eluktronics MECH-17
[ Upstream commit 607ab6f85f4194b644ea95ac5fe660ef575db3b4 ]
The Eluktronics MECH-17 (GM7RG7N) needs IRQ overriding for the
keyboard to work.
Adding a DMI_MATCH entry for this laptop model makes the internal
keyboard function normally.
Signed-off-by: Gannon Kolding <gannon.kolding@gmail.com>
Link: https://patch.msgid.link/20250127093902.328361-1-gannon.kolding@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Paul Menzel <pmenzel@molgen.mpg.de>
Date: Tue Mar 18 17:09:02 2025 +0100
ACPI: resource: Skip IRQ override on ASUS Vivobook 14 X1404VAP
commit 2da31ea2a085cd189857f2db0f7b78d0162db87a upstream.
Like the ASUS Vivobook X1504VAP and Vivobook X1704VAP, the ASUS Vivobook 14
X1404VAP has its keyboard IRQ (1) described as ActiveLow in the DSDT, which
the kernel overrides to EdgeHigh breaking the keyboard.
$ sudo dmidecode
[…]
System Information
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: ASUS Vivobook 14 X1404VAP_X1404VA
[…]
$ grep -A 30 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
Add the X1404VAP to the irq1_level_low_skip_override[] quirk table to fix
this.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219224
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Anton Shyndin <mrcold.il@gmail.com>
Link: https://patch.msgid.link/20250318160903.77107-1-pmenzel@molgen.mpg.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Simon Tatham <anakin@pobox.com>
Date: Thu Feb 20 08:14:44 2025 +0000
affs: don't write overlarge OFS data block size fields
[ Upstream commit 011ea742a25a77bac3d995f457886a67d178c6f0 ]
If a data sector on an OFS floppy contains a value > 0x1e8 (the
largest amount of data that fits in the sector after its header), then
an Amiga reading the file can return corrupt data, by taking the
overlarge size at its word and reading past the end of the buffer it
read the disk sector into!
The cause: when affs_write_end_ofs() writes data to an OFS filesystem,
the new size field for a data block was computed by adding the amount
of data currently being written (into the block) to the existing value
of the size field. This is correct if you're extending the file at the
end, but if you seek backwards in the file and overwrite _existing_
data, it can lead to the size field being larger than the maximum
legal value.
This commit changes the calculation so that it sets the size field to
the max of its previous size and the position within the block that we
just wrote up to.
Signed-off-by: Simon Tatham <anakin@pobox.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Simon Tatham <anakin@pobox.com>
Date: Thu Feb 20 08:14:43 2025 +0000
affs: generate OFS sequence numbers starting at 1
[ Upstream commit e4cf8ec4de4e13f156c1d61977d282d90c221085 ]
If I write a file to an OFS floppy image, and try to read it back on
an emulated Amiga running Workbench 1.3, the Amiga reports a disk
error trying to read the file. (That is, it's unable to read it _at
all_, even to copy it to the NIL: device. It isn't a matter of getting
the wrong data and being unable to parse the file format.)
This is because the 'sequence number' field in the OFS data block
header is supposed to be based at 1, but affs writes it based at 0.
All three locations changed by this patch were setting the sequence
number to a variable 'bidx' which was previously obtained by dividing
a file position by bsize, so bidx will naturally use 0 for the first
block. Therefore all three should add 1 to that value before writing
it into the sequence number field.
With this change, the Amiga successfully reads the file.
For data block reference: https://wiki.osdev.org/FFS_(Amiga)
Signed-off-by: Simon Tatham <anakin@pobox.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric W. Biederman <ebiederm@xmission.com>
Date: Sun Jan 12 23:39:01 2025 -0600
alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support
[ Upstream commit b029628be267cba3c7684ec684749fe3e4372398 ]
Richard Henderson <richard.henderson@linaro.org> writes[1]:
> There was a Spec benchmark (I forget which) which was memory bound and ran
> twice as fast with 32-bit pointers.
>
> I copied the idea from DEC to the ELF abi, but never did all the other work
> to allow the toolchain to take advantage.
>
> Amusingly, a later Spec changed the benchmark data sets to not fit into a
> 32-bit address space, specifically because of this.
>
> I expect one could delete the ELF bit and personality and no one would
> notice. Not even the 10 remaining Alpha users.
In [2] it was pointed out that parts of setarch weren't working
properly on alpha because it has it's own SET_PERSONALITY
implementation. In the discussion that followed Richard Henderson
pointed out that the 32bit pointer support for alpha was never
completed.
Fix this by removing alpha's 32bit pointer support.
As a bit of paranoia refuse to execute any alpha binaries that have
the EF_ALPHA_32BIT flag set. Just in case someone somewhere has
binaries that try to use alpha's 32bit pointer support.
Link: https://lkml.kernel.org/r/CAFXwXrkgu=4Qn-v1PjnOR4SG0oUb9LSa0g6QXpBq4ttm52pJOQ@mail.gmail.com [1]
Link: https://lkml.kernel.org/r/20250103140148.370368-1-glaubitz@physik.fu-berlin.de [2]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/87y0zfs26i.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Navon John Lukose <navonjohnlukose@gmail.com>
Date: Sat Mar 8 03:03:19 2025 +0530
ALSA: hda/realtek: Add mute LED quirk for HP Pavilion x360 14-dy1xxx
[ Upstream commit b11a74ac4f545626d0dc95a8ca8c41df90532bf3 ]
Add a fixup to enable the mute LED on HP Pavilion x360 Convertible
14-dy1xxx with ALC295 codec. The appropriate coefficient index and bits
were identified through a brute-force method, as detailed in
https://bbs.archlinux.org/viewtopic.php?pid=2079504#p2079504.
Signed-off-by: Navon John Lukose <navonjohnlukose@gmail.com>
Link: https://patch.msgid.link/20250307213319.35507-1-navonjohnlukose@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Sat Mar 15 15:30:19 2025 +0100
ALSA: hda/realtek: Always honor no_shutup_pins
[ Upstream commit 5a0c72c1da3cbc0cd4940a95d1be2830104c6edf ]
The workaround for Dell machines to skip the pin-shutup for mic pins
introduced alc_headset_mic_no_shutup() that is replaced from the
generic snd_hda_shutup_pins() for certain codecs. The problem is that
the call is done unconditionally even if spec->no_shutup_pins is set.
This seems causing problems on other platforms like Lenovo.
This patch corrects the behavior and the driver honors always
spec->no_shutup_pins flag and skips alc_headset_mic_no_shutup() if
it's set.
Fixes: dad3197da7a3 ("ALSA: hda/realtek - Fixup headphone noise via runtime suspend")
Reported-and-tested-by: Oleg Gorobets <oleg.goro@gmail.com>
Link: https://patch.msgid.link/20250315143020.27184-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dhruv Deshpande <dhrv.d@proton.me>
Date: Mon Mar 17 08:56:53 2025 +0000
ALSA: hda/realtek: Support mute LED on HP Laptop 15s-du3xxx
commit 35ef1c79d2e09e9e5a66e28a66fe0df4368b0f3d upstream.
The mute LED on this HP laptop uses ALC236 and requires a quirk to function.
This patch enables the existing quirk for the device.
Tested on my laptop and the LED behaviour works as intended.
Cc: stable@vger.kernel.org
Signed-off-by: Dhruv Deshpande <dhrv.d@proton.me>
Link: https://patch.msgid.link/20250317085621.45056-1-dhrv.d@proton.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Terry Junge <linuxhid@cosmicgizmosystems.com>
Date: Fri Jan 17 16:58:39 2025 -0800
ALSA: usb-audio: Add quirk for Plantronics headsets to fix control names
commit 486f6205c233da1baa309bde5f634eb1f8319a33 upstream.
Many Poly/Plantronics headset families name the feature, input,
and/or output units in a such a way to produce control names
that are not recognized by user space. As such, the volume and
mute events do not get routed to the headset's audio controls.
As an example from a product family:
The microphone mute control is named
Headset Microphone Capture Switch
and the headset volume control is named
Headset Earphone Playback Volume
The quirk fixes these to become
Headset Capture Switch
Headset Playback Volume
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Henry Martin <bsdhenrymartin@gmail.com>
Date: Wed Apr 2 21:50:36 2025 +0800
arcnet: Add NULL check in com20020pci_probe()
[ Upstream commit fda8c491db2a90ff3e6fbbae58e495b4ddddeca3 ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
com20020pci_probe() does not check for this case, which results in a
NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue and ensure
no resources are left allocated.
Fixes: 6b17a597fc2f ("arcnet: restoring support for multiple Sohard Arcnet cards")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250402135036.44697-1-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <kees@kernel.org>
Date: Thu Feb 1 18:32:58 2024 +0100
ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()
commit 169f9102f9198b04afffa6164372a4ba4070f412 upstream.
Under PAN emulation when dumping backtraces from things like the
LKDTM EXEC_USERSPACE test[1], a double fault (which would hang a CPU)
would happen because of dump_instr() attempting to read a userspace
address. Make sure copy_from_kernel_nofault() does not attempt this
any more.
Closes: https://lava.sirena.org.uk/scheduler/job/497571
Link: https://lore.kernel.org/all/202401181125.D48DCB4C@keescook/ [1]
Reported-by: Mark Brown <broonie@kernel.org>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Wang Kefeng <wangkefeng.wang@huawei.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kees Cook <kees@kernel.org>
Date: Thu Feb 1 18:32:23 2024 +0100
ARM: 9351/1: fault: Add "cut here" line for prefetch aborts
commit 8f09b8b4fa58e99cbfd9a650b31d65cdbd8e4276 upstream.
The common pattern in arm is to emit a "8<--- cut here ---" line for
faults, but it was missing for do_PrefetchAbort(). Add it.
Cc: Wang Kefeng <wangkefeng.wang@huawei.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Phil Elwell <phil@raspberrypi.com>
Date: Sat Feb 22 10:41:13 2025 +0100
ARM: dts: bcm2711: Don't mark timer regs unconfigured
[ Upstream commit c24f272ae751a9f54f8816430e7f2d56031892cc ]
During upstream process of Raspberry Pi 4 back in 2019 the ARMv7 stubs
didn't configured the ARM architectural timer. This firmware issue has
been fixed in 2020, which gave users enough time to update their system.
So drop this property to allow the use of the vDSO version of
clock_gettime.
Link: https://github.com/raspberrypi/tools/pull/113
Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250222094113.48198-1-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Phil Elwell <phil@raspberrypi.com>
Date: Sun Feb 23 13:56:13 2025 +0100
ARM: dts: bcm2711: PL011 UARTs are actually r1p5
[ Upstream commit 0de09025f161f67c07978c4742e221243d070d41 ]
The ARM PL011 UART instances in BCM2711 are r1p5 spec, which means they
have 32-entry FIFOs. The correct periphid value for this is 0x00341011.
Thanks to N Buchwitz for pointing this out.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250223125614.3592-2-wahrenst@gmx.net
Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yanjun Yang <yangyj.ee@gmail.com>
Date: Tue Jun 11 18:09:47 2024 +0800
ARM: Remove address checking for MMUless devices
commit 3ccea4784fddd96fbd6c4497eb28b45dab638c2a upstream.
Commit 169f9102f9198b ("ARM: 9350/1: fault: Implement
copy_from_kernel_nofault_allowed()") added the function to check address
before use. However, for devices without MMU, addr > TASK_SIZE will
always fail. This patch move this function after the #ifdef CONFIG_MMU
statement.
Signed-off-by: Yanjun Yang <yangyj.ee@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218953
Fixes: 169f9102f9198b ("ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()")
Link: https://lore.kernel.org/r/20240611100947.32241-1-yangyj.ee@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Mon Mar 10 14:12:20 2025 +0100
ARM: shmobile: smp: Enforce shmobile_smp_* alignment
commit 379c590113ce46f605439d4887996c60ab8820cc upstream.
When the addresses of the shmobile_smp_mpidr, shmobile_smp_fn, and
shmobile_smp_arg variables are not multiples of 4 bytes, secondary CPU
bring-up fails:
smp: Bringing up secondary CPUs ...
CPU1: failed to come online
CPU2: failed to come online
CPU3: failed to come online
smp: Brought up 1 node, 1 CPU
Fix this by adding the missing alignment directive.
Fixes: 4e960f52fce16a3b ("ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss")
Closes: https://lore.kernel.org/r/CAMuHMdU=QR-JLgEHKWpsr6SbaZRc-Hz9r91JfpP8c3n2G-OjqA@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/c499234d559a0d95ad9472883e46077311051cd8.1741612208.git.geert+renesas@glider.be
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Date: Wed Feb 5 16:08:46 2025 +0000
ASoC: arizona/madera: use fsleep() in up/down DAPM event delays.
[ Upstream commit 679074942c2502a95842a80471d8fb718165ac77 ]
Using `fsleep` instead of `msleep` resolves some customer complaints
regarding the precision of up/down DAPM event timing. `fsleep()`
automatically selects the appropriate sleep function, making the delay
time more predictable.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20250205160849.500306-1-vitalyr@opensource.cirrus.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Mon Mar 10 18:45:36 2025 +0100
ASoC: codecs: wm0010: Fix error handling path in wm0010_spi_probe()
[ Upstream commit ed92bc5264c4357d4fca292c769ea9967cd3d3b6 ]
Free some resources in the error handling path of the probe, as already
done in the remove function.
Fixes: e3523e01869d ("ASoC: wm0010: Add initial wm0010 DSP driver")
Fixes: fd8b96574456 ("ASoC: wm0010: Clear IRQ as wake source and include missing header")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/5139ba1ab8c4c157ce04e56096a0f54a1683195c.1741549792.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed Feb 5 00:20:42 2025 +0000
ASoC: rsnd: don't indicate warning on rsnd_kctrl_accept_runtime()
[ Upstream commit c3fc002b206c6c83d1e3702b979733002ba6fb2c ]
rsnd_kctrl_accept_runtime() (1) is used for runtime convert rate
(= Synchronous SRC Mode). Now, rsnd driver has 2 kctrls for it
(A): "SRC Out Rate Switch"
(B): "SRC Out Rate" // it calls (1)
(A): can be called anytime
(B): can be called only runtime, and will indicate warning if it was used
at non-runtime.
To use runtime convert rate (= Synchronous SRC Mode), user might uses
command in below order.
(X): > amixer set "SRC Out Rate" on
> aplay xxx.wav &
(Y): > amixer set "SRC Out Rate" 48010 // convert rate to 48010Hz
(Y): calls B
(X): calls both A and B.
In this case, when user calls (X), it calls both (A) and (B), but it is not
yet start running. So, (B) will indicate warning.
This warning was added by commit b5c088689847 ("ASoC: rsnd: add warning
message to rsnd_kctrl_accept_runtime()"), but the message sounds like the
operation was not correct. Let's update warning message.
The message is very SRC specific, implement it in src.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/8734gt2qed.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Terry Cheong <htcheong@chromium.org>
Date: Thu Feb 6 11:47:23 2025 +0200
ASoC: SOF: Intel: hda: add softdep pre to snd-hda-codec-hdmi module
[ Upstream commit 33b7dc7843dbdc9b90c91d11ba30b107f9138ffd ]
In enviornment without KMOD requesting module may fail to load
snd-hda-codec-hdmi, resulting in HDMI audio not usable.
Add softdep to loading HDMI codec module first to ensure we can load it
correctly.
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Johny Lin <lpg76627@gmail.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250206094723.18013-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hector Martin <marcan@marcan.st>
Date: Tue Feb 18 18:35:35 2025 +1000
ASoC: tas2764: Fix power control mask
[ Upstream commit a3f172359e22b2c11b750d23560481a55bf86af1 ]
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250218-apple-codec-changes-v2-1-932760fd7e07@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hector Martin <marcan@marcan.st>
Date: Tue Feb 18 18:36:02 2025 +1000
ASoC: tas2764: Set the SDOUT polarity correctly
[ Upstream commit f5468beeab1b1adfc63c2717b1f29ef3f49a5fab ]
TX launch polarity needs to be the opposite of RX capture polarity, to
generate the right bit slot alignment.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250218-apple-codec-changes-v2-28-932760fd7e07@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hector Martin <marcan@marcan.st>
Date: Sat Feb 8 00:54:35 2025 +0000
ASoC: tas2770: Fix volume scale
[ Upstream commit 579cd64b9df8a60284ec3422be919c362de40e41 ]
The scale starts at -100dB, not -128dB.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-tas2770-v1-1-cf50ff1d59a3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jayesh Choudhary <j-choudhary@ti.com>
Date: Tue Mar 18 17:05:24 2025 +0530
ASoC: ti: j721e-evm: Fix clock configuration for ti,j7200-cpb-audio compatible
[ Upstream commit 45ff65e30deb919604e68faed156ad96ce7474d9 ]
For 'ti,j7200-cpb-audio' compatible, there is support for only one PLL for
48k. For 11025, 22050, 44100 and 88200 sampling rates, due to absence of
J721E_CLK_PARENT_44100, we get EINVAL while running any audio application.
Add support for these rates by using the 48k parent clock and adjusting
the clock for these rates later in j721e_configure_refclk.
Fixes: 6748d0559059 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://patch.msgid.link/20250318113524.57100-1-j-choudhary@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Minjoong Kim <pwn9uin@gmail.com>
Date: Sat Mar 22 10:52:00 2025 +0000
atm: Fix NULL pointer dereference
commit bf2986fcf82a449441f9ee4335df19be19e83970 upstream.
When MPOA_cache_impos_rcvd() receives the msg, it can trigger
Null Pointer Dereference Vulnerability if both entry and
holding_time are NULL. Because there is only for the situation
where entry is NULL and holding_time exists, it can be passed
when both entry and holding_time are NULL. If these are NULL,
the entry will be passd to eg_cache_put() as parameter and
it is referenced by entry->use code in it.
kasan log:
[ 3.316691] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006:I
[ 3.317568] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 3.318188] CPU: 3 UID: 0 PID: 79 Comm: ex Not tainted 6.14.0-rc2 #102
[ 3.318601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 3.319298] RIP: 0010:eg_cache_remove_entry+0xa5/0x470
[ 3.319677] Code: c1 f7 6e fd 48 c7 c7 00 7e 38 b2 e8 95 64 54 fd 48 c7 c7 40 7e 38 b2 48 89 ee e80
[ 3.321220] RSP: 0018:ffff88800583f8a8 EFLAGS: 00010006
[ 3.321596] RAX: 0000000000000006 RBX: ffff888005989000 RCX: ffffffffaecc2d8e
[ 3.322112] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000030
[ 3.322643] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6558b88
[ 3.323181] R10: 0000000000000003 R11: 203a207972746e65 R12: 1ffff11000b07f15
[ 3.323707] R13: dffffc0000000000 R14: ffff888005989000 R15: ffff888005989068
[ 3.324185] FS: 000000001b6313c0(0000) GS:ffff88806d380000(0000) knlGS:0000000000000000
[ 3.325042] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.325545] CR2: 00000000004b4b40 CR3: 000000000248e000 CR4: 00000000000006f0
[ 3.326430] Call Trace:
[ 3.326725] <TASK>
[ 3.326927] ? die_addr+0x3c/0xa0
[ 3.327330] ? exc_general_protection+0x161/0x2a0
[ 3.327662] ? asm_exc_general_protection+0x26/0x30
[ 3.328214] ? vprintk_emit+0x15e/0x420
[ 3.328543] ? eg_cache_remove_entry+0xa5/0x470
[ 3.328910] ? eg_cache_remove_entry+0x9a/0x470
[ 3.329294] ? __pfx_eg_cache_remove_entry+0x10/0x10
[ 3.329664] ? console_unlock+0x107/0x1d0
[ 3.329946] ? __pfx_console_unlock+0x10/0x10
[ 3.330283] ? do_syscall_64+0xa6/0x1a0
[ 3.330584] ? entry_SYSCALL_64_after_hwframe+0x47/0x7f
[ 3.331090] ? __pfx_prb_read_valid+0x10/0x10
[ 3.331395] ? down_trylock+0x52/0x80
[ 3.331703] ? vprintk_emit+0x15e/0x420
[ 3.331986] ? __pfx_vprintk_emit+0x10/0x10
[ 3.332279] ? down_trylock+0x52/0x80
[ 3.332527] ? _printk+0xbf/0x100
[ 3.332762] ? __pfx__printk+0x10/0x10
[ 3.333007] ? _raw_write_lock_irq+0x81/0xe0
[ 3.333284] ? __pfx__raw_write_lock_irq+0x10/0x10
[ 3.333614] msg_from_mpoad+0x1185/0x2750
[ 3.333893] ? __build_skb_around+0x27b/0x3a0
[ 3.334183] ? __pfx_msg_from_mpoad+0x10/0x10
[ 3.334501] ? __alloc_skb+0x1c0/0x310
[ 3.334809] ? __pfx___alloc_skb+0x10/0x10
[ 3.335283] ? _raw_spin_lock+0xe0/0xe0
[ 3.335632] ? finish_wait+0x8d/0x1e0
[ 3.335975] vcc_sendmsg+0x684/0xba0
[ 3.336250] ? __pfx_vcc_sendmsg+0x10/0x10
[ 3.336587] ? __pfx_autoremove_wake_function+0x10/0x10
[ 3.337056] ? fdget+0x176/0x3e0
[ 3.337348] __sys_sendto+0x4a2/0x510
[ 3.337663] ? __pfx___sys_sendto+0x10/0x10
[ 3.337969] ? ioctl_has_perm.constprop.0.isra.0+0x284/0x400
[ 3.338364] ? sock_ioctl+0x1bb/0x5a0
[ 3.338653] ? __rseq_handle_notify_resume+0x825/0xd20
[ 3.339017] ? __pfx_sock_ioctl+0x10/0x10
[ 3.339316] ? __pfx___rseq_handle_notify_resume+0x10/0x10
[ 3.339727] ? selinux_file_ioctl+0xa4/0x260
[ 3.340166] __x64_sys_sendto+0xe0/0x1c0
[ 3.340526] ? syscall_exit_to_user_mode+0x123/0x140
[ 3.340898] do_syscall_64+0xa6/0x1a0
[ 3.341170] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 3.341533] RIP: 0033:0x44a380
[ 3.341757] Code: 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c00
[ 3.343078] RSP: 002b:00007ffc1d404098 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 3.343631] RAX: ffffffffffffffda RBX: 00007ffc1d404458 RCX: 000000000044a380
[ 3.344306] RDX: 000000000000019c RSI: 00007ffc1d4040b0 RDI: 0000000000000003
[ 3.344833] RBP: 00007ffc1d404260 R08: 0000000000000000 R09: 0000000000000000
[ 3.345381] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
[ 3.346015] R13: 00007ffc1d404448 R14: 00000000004c17d0 R15: 0000000000000001
[ 3.346503] </TASK>
[ 3.346679] Modules linked in:
[ 3.346956] ---[ end trace 0000000000000000 ]---
[ 3.347315] RIP: 0010:eg_cache_remove_entry+0xa5/0x470
[ 3.347737] Code: c1 f7 6e fd 48 c7 c7 00 7e 38 b2 e8 95 64 54 fd 48 c7 c7 40 7e 38 b2 48 89 ee e80
[ 3.349157] RSP: 0018:ffff88800583f8a8 EFLAGS: 00010006
[ 3.349517] RAX: 0000000000000006 RBX: ffff888005989000 RCX: ffffffffaecc2d8e
[ 3.350103] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000030
[ 3.350610] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6558b88
[ 3.351246] R10: 0000000000000003 R11: 203a207972746e65 R12: 1ffff11000b07f15
[ 3.351785] R13: dffffc0000000000 R14: ffff888005989000 R15: ffff888005989068
[ 3.352404] FS: 000000001b6313c0(0000) GS:ffff88806d380000(0000) knlGS:0000000000000000
[ 3.353099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.353544] CR2: 00000000004b4b40 CR3: 000000000248e000 CR4: 00000000000006f0
[ 3.354072] note: ex[79] exited with irqs disabled
[ 3.354458] note: ex[79] exited with preempt_count 1
Signed-off-by: Minjoong Kim <pwn9uin@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250322105200.14981-1-pwn9uin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Sun Feb 2 17:04:13 2025 +0100
batman-adv: Ignore own maximum aggregation size during RX
commit 548b0c5de7619ef53bbde5590700693f2f6d2a56 upstream.
An OGMv1 and OGMv2 packet receive processing were not only limited by the
number of bytes in the received packet but also by the nodes maximum
aggregation packet size limit. But this limit is relevant for TX and not
for RX. It must not be enforced by batadv_(i)v_ogm_aggr_packet to avoid
loss of information in case of a different limit for sender and receiver.
This has a minor side effect for B.A.T.M.A.N. IV because the
batadv_iv_ogm_aggr_packet is also used for the preprocessing for the TX.
But since the aggregation code itself will not allow more than
BATADV_MAX_AGGREGATION_BYTES bytes, this check was never triggering (in
this context) prior of removing it.
Cc: stable@vger.kernel.org
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ming Lei <ming.lei@redhat.com>
Date: Fri Feb 28 21:26:56 2025 +0800
block: fix 'kmem_cache of name 'bio-108' already exists'
[ Upstream commit b654f7a51ffb386131de42aa98ed831f8c126546 ]
Device mapper bioset often has big bio_slab size, which can be more than
1000, then 8byte can't hold the slab name any more, cause the kmem_cache
allocation warning of 'kmem_cache of name 'bio-108' already exists'.
Fix the warning by extending bio_slab->name to 12 bytes, but fix output
of /proc/slabinfo
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228132656.2838008-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Mon Mar 10 22:46:56 2025 +0300
Bluetooth: Fix error code in chan_alloc_skb_cb()
[ Upstream commit 72d061ee630d0dbb45c2920d8d19b3861c413e54 ]
The chan_alloc_skb_cb() function is supposed to return error pointers on
error. Returning NULL will lead to a NULL dereference.
Fixes: 6b8d4a6a0314 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Thu Sep 12 12:17:00 2024 -0400
Bluetooth: hci_event: Align BR/EDR JUST_WORKS paring with LE
commit b25e11f978b63cb7857890edb3a698599cddb10e upstream.
This aligned BR/EDR JUST_WORKS method with LE which since 92516cd97fd4
("Bluetooth: Always request for user confirmation for Just Works")
always request user confirmation with confirm_hint set since the
likes of bluetoothd have dedicated policy around JUST_WORKS method
(e.g. main.conf:JustWorksRepairing).
CVE: CVE-2024-8805
Cc: stable@vger.kernel.org
Fixes: ba15a58b179e ("Bluetooth: Fix SSP acceptor just-works confirmation without MITM")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michal Luczaj <mhal@rbox.co>
Date: Mon Dec 2 12:29:25 2024 +0100
bpf, sockmap: Fix race between element replace and close()
commit ed1fc5d76b81a4d681211333c026202cad4d5649 upstream.
Element replace (with a socket different from the one stored) may race
with socket's close() link popping & unlinking. __sock_map_delete()
unconditionally unrefs the (wrong) element:
// set map[0] = s0
map_update_elem(map, 0, s0)
// drop fd of s0
close(s0)
sock_map_close()
lock_sock(sk) (s0!)
sock_map_remove_links(sk)
link = sk_psock_link_pop()
sock_map_unlink(sk, link)
sock_map_delete_from_link
// replace map[0] with s1
map_update_elem(map, 0, s1)
sock_map_update_elem
(s1!) lock_sock(sk)
sock_map_update_common
psock = sk_psock(sk)
spin_lock(&stab->lock)
osk = stab->sks[idx]
sock_map_add_link(..., &stab->sks[idx])
sock_map_unref(osk, &stab->sks[idx])
psock = sk_psock(osk)
sk_psock_put(sk, psock)
if (refcount_dec_and_test(&psock))
sk_psock_drop(sk, psock)
spin_unlock(&stab->lock)
unlock_sock(sk)
__sock_map_delete
spin_lock(&stab->lock)
sk = *psk // s1 replaced s0; sk == s1
if (!sk_test || sk_test == sk) // sk_test (s0) != sk (s1); no branch
sk = xchg(psk, NULL)
if (sk)
sock_map_unref(sk, psk) // unref s1; sks[idx] will dangle
psock = sk_psock(sk)
sk_psock_put(sk, psock)
if (refcount_dec_and_test())
sk_psock_drop(sk, psock)
spin_unlock(&stab->lock)
release_sock(sk)
Then close(map) enqueues bpf_map_free_deferred, which finally calls
sock_map_free(). This results in some refcount_t warnings along with
a KASAN splat [1].
Fix __sock_map_delete(), do not allow sock_map_unref() on elements that
may have been replaced.
[1]:
BUG: KASAN: slab-use-after-free in sock_map_free+0x10e/0x330
Write of size 4 at addr ffff88811f5b9100 by task kworker/u64:12/1063
CPU: 14 UID: 0 PID: 1063 Comm: kworker/u64:12 Not tainted 6.12.0+ #125
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
Workqueue: events_unbound bpf_map_free_deferred
Call Trace:
<TASK>
dump_stack_lvl+0x68/0x90
print_report+0x174/0x4f6
kasan_report+0xb9/0x190
kasan_check_range+0x10f/0x1e0
sock_map_free+0x10e/0x330
bpf_map_free_deferred+0x173/0x320
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x29e/0x360
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 1202:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x85/0x90
kmem_cache_alloc_noprof+0x131/0x450
sk_prot_alloc+0x5b/0x220
sk_alloc+0x2c/0x870
unix_create1+0x88/0x8a0
unix_create+0xc5/0x180
__sock_create+0x241/0x650
__sys_socketpair+0x1ce/0x420
__x64_sys_socketpair+0x92/0x100
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 46:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x60
__kasan_slab_free+0x4b/0x70
kmem_cache_free+0x1a1/0x590
__sk_destruct+0x388/0x5a0
sk_psock_destroy+0x73e/0xa50
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x29e/0x360
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
The buggy address belongs to the object at ffff88811f5b9080
which belongs to the cache UNIX-STREAM of size 1984
The buggy address is located 128 bytes inside of
freed 1984-byte region [ffff88811f5b9080, ffff88811f5b9840)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11f5b8
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
memcg:ffff888127d49401
flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: f5(slab)
raw: 0017ffffc0000040 ffff8881042e4500 dead000000000122 0000000000000000
raw: 0000000000000000 00000000800f000f 00000001f5000000 ffff888127d49401
head: 0017ffffc0000040 ffff8881042e4500 dead000000000122 0000000000000000
head: 0000000000000000 00000000800f000f 00000001f5000000 ffff888127d49401
head: 0017ffffc0000003 ffffea00047d6e01 ffffffffffffffff 0000000000000000
head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88811f5b9000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88811f5b9080: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88811f5b9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88811f5b9200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Disabling lock debugging due to kernel taint
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 14 PID: 1063 at lib/refcount.c:25 refcount_warn_saturate+0xce/0x150
CPU: 14 UID: 0 PID: 1063 Comm: kworker/u64:12 Tainted: G B 6.12.0+ #125
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
Workqueue: events_unbound bpf_map_free_deferred
RIP: 0010:refcount_warn_saturate+0xce/0x150
Code: 34 73 eb 03 01 e8 82 53 ad fe 0f 0b eb b1 80 3d 27 73 eb 03 00 75 a8 48 c7 c7 80 bd 95 84 c6 05 17 73 eb 03 01 e8 62 53 ad fe <0f> 0b eb 91 80 3d 06 73 eb 03 00 75 88 48 c7 c7 e0 bd 95 84 c6 05
RSP: 0018:ffff88815c49fc70 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff88811f5b9100 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000001
RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed10bcde6349
R10: ffff8885e6f31a4b R11: 0000000000000000 R12: ffff88813be0b000
R13: ffff88811f5b9100 R14: ffff88811f5b9080 R15: ffff88813be0b024
FS: 0000000000000000(0000) GS:ffff8885e6f00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055dda99b0250 CR3: 000000015dbac000 CR4: 0000000000752ef0
PKRU: 55555554
Call Trace:
<TASK>
? __warn.cold+0x5f/0x1ff
? refcount_warn_saturate+0xce/0x150
? report_bug+0x1ec/0x390
? handle_bug+0x58/0x90
? exc_invalid_op+0x13/0x40
? asm_exc_invalid_op+0x16/0x20
? refcount_warn_saturate+0xce/0x150
sock_map_free+0x2e5/0x330
bpf_map_free_deferred+0x173/0x320
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x29e/0x360
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 10741
hardirqs last enabled at (10741): [<ffffffff84400ec6>] asm_sysvec_apic_timer_interrupt+0x16/0x20
hardirqs last disabled at (10740): [<ffffffff811e532d>] handle_softirqs+0x60d/0x770
softirqs last enabled at (10506): [<ffffffff811e55a9>] __irq_exit_rcu+0x109/0x210
softirqs last disabled at (10301): [<ffffffff811e55a9>] __irq_exit_rcu+0x109/0x210
refcount_t: underflow; use-after-free.
WARNING: CPU: 14 PID: 1063 at lib/refcount.c:28 refcount_warn_saturate+0xee/0x150
CPU: 14 UID: 0 PID: 1063 Comm: kworker/u64:12 Tainted: G B W 6.12.0+ #125
Tainted: [B]=BAD_PAGE, [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
Workqueue: events_unbound bpf_map_free_deferred
RIP: 0010:refcount_warn_saturate+0xee/0x150
Code: 17 73 eb 03 01 e8 62 53 ad fe 0f 0b eb 91 80 3d 06 73 eb 03 00 75 88 48 c7 c7 e0 bd 95 84 c6 05 f6 72 eb 03 01 e8 42 53 ad fe <0f> 0b e9 6e ff ff ff 80 3d e6 72 eb 03 00 0f 85 61 ff ff ff 48 c7
RSP: 0018:ffff88815c49fc70 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff88811f5b9100 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000001
RBP: 0000000000000003 R08: 0000000000000001 R09: ffffed10bcde6349
R10: ffff8885e6f31a4b R11: 0000000000000000 R12: ffff88813be0b000
R13: ffff88811f5b9100 R14: ffff88811f5b9080 R15: ffff88813be0b024
FS: 0000000000000000(0000) GS:ffff8885e6f00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055dda99b0250 CR3: 000000015dbac000 CR4: 0000000000752ef0
PKRU: 55555554
Call Trace:
<TASK>
? __warn.cold+0x5f/0x1ff
? refcount_warn_saturate+0xee/0x150
? report_bug+0x1ec/0x390
? handle_bug+0x58/0x90
? exc_invalid_op+0x13/0x40
? asm_exc_invalid_op+0x16/0x20
? refcount_warn_saturate+0xee/0x150
sock_map_free+0x2d3/0x330
bpf_map_free_deferred+0x173/0x320
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x29e/0x360
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 10741
hardirqs last enabled at (10741): [<ffffffff84400ec6>] asm_sysvec_apic_timer_interrupt+0x16/0x20
hardirqs last disabled at (10740): [<ffffffff811e532d>] handle_softirqs+0x60d/0x770
softirqs last enabled at (10506): [<ffffffff811e55a9>] __irq_exit_rcu+0x109/0x210
softirqs last disabled at (10301): [<ffffffff811e55a9>] __irq_exit_rcu+0x109/0x210
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241202-sockmap-replace-v1-3-1e88579e7bd5@rbox.co
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hou Tao <houtao1@huawei.com>
Date: Thu Feb 20 12:22:59 2025 +0800
bpf: Use preempt_count() directly in bpf_send_signal_common()
[ Upstream commit b4a8b5bba712a711d8ca1f7d04646db63f9c88f5 ]
bpf_send_signal_common() uses preemptible() to check whether or not the
current context is preemptible. If it is preemptible, it will use
irq_work to send the signal asynchronously instead of trying to hold a
spin-lock, because spin-lock is sleepable under PREEMPT_RT.
However, preemptible() depends on CONFIG_PREEMPT_COUNT. When
CONFIG_PREEMPT_COUNT is turned off (e.g., CONFIG_PREEMPT_VOLUNTARY=y),
!preemptible() will be evaluated as 1 and bpf_send_signal_common() will
use irq_work unconditionally.
Fix it by unfolding "!preemptible()" and using "preempt_count() != 0 ||
irqs_disabled()" instead.
Fixes: 87c544108b61 ("bpf: Send signals asynchronously if !preemptible")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250220042259.1583319-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Josef Bacik <josef@toxicpanda.com>
Date: Tue May 7 14:12:15 2024 -0400
btrfs: handle errors from btrfs_dec_ref() properly
commit 5eb178f373b4f16f3b42d55ff88fc94dd95b93b1 upstream.
In walk_up_proc() we BUG_ON(ret) from btrfs_dec_ref(). This is
incorrect, we have proper error handling here, return the error.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Haibo Chen <haibo.chen@nxp.com>
Date: Fri Mar 14 19:01:44 2025 +0800
can: flexcan: only change CAN state when link up in system PM
[ Upstream commit fd99d6ed20234b83d65b9c5417794343577cf3e5 ]
After a suspend/resume cycle on a down interface, it will come up as
ERROR-ACTIVE.
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000
$ sudo systemctl suspend
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000
And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process
has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did.
Fixes: 4de349e786a3 ("can: flexcan: fix resume function")
Cc: stable@vger.kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/all/20250314-married-polar-elephant-b15594-mkl@pengutronix.de
[mkl: add newlines]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Mon Mar 10 15:33:53 2025 +0100
can: statistics: use atomic access in hot path
[ Upstream commit 80b5f90158d1364cbd80ad82852a757fc0692bf2 ]
In can_send() and can_receive() CAN messages and CAN filter matches are
counted to be visible in the CAN procfs files.
KCSAN detected a data race within can_send() when two CAN frames have
been generated by a timer event writing to the same CAN netdevice at the
same time. Use atomic operations to access the statistics in the hot path
to fix the KCSAN complaint.
Reported-by: syzbot+78ce4489b812515d5e4d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67cd717d.050a0220.e1a89.0006.GAE@google.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250310143353.3242-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jerome Brunet <jbrunet@baylibre.com>
Date: Fri Dec 13 11:03:23 2024 +0100
clk: amlogic: g12a: fix mmc A peripheral clock
[ Upstream commit 0079e77c08de692cb20b38e408365c830a44b1ef ]
The bit index of the peripheral clock for mmc A is wrong
This was probably not a problem for mmc A as the peripheral is likely left
enabled by the bootloader.
No issues has been reported so far but it could be a problem, most likely
some form of conflict between the ethernet and mmc A clock, breaking
ethernet on init.
Use the value provided by the documentation for mmc A before this
becomes an actual problem.
Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-mmca-fix-v1-1-5af421f58b64@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jerome Brunet <jbrunet@baylibre.com>
Date: Fri Dec 13 15:30:17 2024 +0100
clk: amlogic: g12b: fix cluster A parent data
[ Upstream commit 8995f8f108c3ac5ad52b12a6cfbbc7b3b32e9a58 ]
Several clocks used by both g12a and g12b use the g12a cpu A clock hw
pointer as clock parent. This is incorrect on g12b since the parents of
cluster A cpu clock are different. Also the hw clock provided as parent to
these children is not even registered clock on g12b.
Fix the problem by reverting to the global namespace and let CCF pick
the appropriate, as it is already done for other clocks, such as
cpu_clk_trace_div.
Fixes: 25e682a02d91 ("clk: meson: g12a: migrate to the new parent description method")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-cpua-parent-fix-v1-1-d8c0f41865fe@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jerome Brunet <jbrunet@baylibre.com>
Date: Fri Dec 20 11:25:36 2024 +0100
clk: amlogic: gxbb: drop incorrect flag on 32k clock
[ Upstream commit f38f7fe4830c5cb4eac138249225f119e7939965 ]
gxbb_32k_clk_div sets CLK_DIVIDER_ROUND_CLOSEST in the init_data flag which
is incorrect. This is field is not where the divider flags belong.
Thankfully, CLK_DIVIDER_ROUND_CLOSEST maps to bit 4 which is an unused
clock flag, so there is no unintended consequence to this error.
Effectively, the clock has been used without CLK_DIVIDER_ROUND_CLOSEST
so far, so just drop it.
Fixes: 14c735c8e308 ("clk: meson-gxbb: Add EE 32K Clock for CEC")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241220-amlogic-clk-gxbb-32k-fixes-v1-1-baca56ecf2db@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jerome Brunet <jbrunet@baylibre.com>
Date: Fri Dec 20 11:25:37 2024 +0100
clk: amlogic: gxbb: drop non existing 32k clock parent
[ Upstream commit 7915d7d5407c026fa9343befb4d3343f7a345f97 ]
The 32k clock reference a parent 'cts_slow_oscin' with a fixme note saying
that this clock should be provided by AO controller.
The HW probably has this clock but it does not exist at the moment in
any controller implementation. Furthermore, referencing clock by the global
name should be avoided whenever possible.
There is no reason to keep this hack around, at least for now.
Fixes: 14c735c8e308 ("clk: meson-gxbb: Add EE 32K Clock for CEC")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241220-amlogic-clk-gxbb-32k-fixes-v1-2-baca56ecf2db@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Geis <pgwipeout@gmail.com>
Date: Wed Jan 15 01:26:22 2025 +0000
clk: rockchip: rk3328: fix wrong clk_ref_usb3otg parent
[ Upstream commit a9e60f1ffe1ca57d6af6a2573e2f950e76efbf5b ]
Correct the clk_ref_usb3otg parent to fix clock control for the usb3
controller on rk3328. Verified against the rk3328 trm, the rk3228h trm,
and the rk3328 usb3 phy clock map.
Fixes: fe3511ad8a1c ("clk: rockchip: add clock controller for rk3328")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250115012628.1035928-2-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Will McVicker <willmcvicker@google.com>
Date: Wed Feb 12 10:32:52 2025 -0800
clk: samsung: Fix UBSAN panic in samsung_clk_init()
[ Upstream commit d19d7345a7bcdb083b65568a11b11adffe0687af ]
With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to
dereferencing `ctx->clk_data.hws` before setting
`ctx->clk_data.num = nr_clks`. Move that up to fix the crash.
UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
<snip>
Call trace:
samsung_clk_init+0x110/0x124 (P)
samsung_clk_init+0x48/0x124 (L)
samsung_cmu_register_one+0x3c/0xa0
exynos_arm64_register_cmu+0x54/0x64
__gs101_cmu_top_of_clk_init_declare+0x28/0x60
...
Fixes: e620a1e061c4 ("drivers/clk: convert VL struct to struct_size")
Signed-off-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20250212183253.509771-1-willmcvicker@google.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Woodhouse <dwmw@amazon.co.uk>
Date: Fri Aug 2 14:55:55 2024 +0100
clockevents/drivers/i8253: Fix stop sequence for timer 0
commit 531b2ca0a940ac9db03f246c8b77c4201de72b00 upstream.
According to the data sheet, writing the MODE register should stop the
counter (and thus the interrupts). This appears to work on real hardware,
at least modern Intel and AMD systems. It should also work on Hyper-V.
However, on some buggy virtual machines the mode change doesn't have any
effect until the counter is subsequently loaded (or perhaps when the IRQ
next fires).
So, set MODE 0 and then load the counter, to ensure that those buggy VMs
do the right thing and the interrupts stop. And then write MODE 0 *again*
to stop the counter on compliant implementations too.
Apparently, Hyper-V keeps firing the IRQ *repeatedly* even in mode zero
when it should only happen once, but the second MODE write stops that too.
Userspace test program (mostly written by tglx):
=====
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <stdint.h>
#include <sys/io.h>
static __always_inline void __out##bwl(type value, uint16_t port) \
{ \
asm volatile("out" #bwl " %" #bw "0, %w1" \
: : "a"(value), "Nd"(port)); \
} \
\
static __always_inline type __in##bwl(uint16_t port) \
{ \
type value; \
asm volatile("in" #bwl " %w1, %" #bw "0" \
: "=a"(value) : "Nd"(port)); \
return value; \
}
BUILDIO(b, b, uint8_t)
#define inb __inb
#define outb __outb
#define PIT_MODE 0x43
#define PIT_CH0 0x40
#define PIT_CH2 0x42
static int is8254;
static void dump_pit(void)
{
if (is8254) {
// Latch and output counter and status
outb(0xC2, PIT_MODE);
printf("%02x %02x %02x\n", inb(PIT_CH0), inb(PIT_CH0), inb(PIT_CH0));
} else {
// Latch and output counter
outb(0x0, PIT_MODE);
printf("%02x %02x\n", inb(PIT_CH0), inb(PIT_CH0));
}
}
int main(int argc, char* argv[])
{
int nr_counts = 2;
if (argc > 1)
nr_counts = atoi(argv[1]);
if (argc > 2)
is8254 = 1;
if (ioperm(0x40, 4, 1) != 0)
return 1;
dump_pit();
printf("Set oneshot\n");
outb(0x38, PIT_MODE);
outb(0x00, PIT_CH0);
outb(0x0F, PIT_CH0);
dump_pit();
usleep(1000);
dump_pit();
printf("Set periodic\n");
outb(0x34, PIT_MODE);
outb(0x00, PIT_CH0);
outb(0x0F, PIT_CH0);
dump_pit();
usleep(1000);
dump_pit();
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
printf("Set stop (%d counter writes)\n", nr_counts);
outb(0x30, PIT_MODE);
while (nr_counts--)
outb(0xFF, PIT_CH0);
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
printf("Set MODE 0\n");
outb(0x30, PIT_MODE);
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
return 0;
}
=====
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/all/20240802135555.564941-2-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Date: Thu Jan 9 21:53:48 2025 +0000
coresight: catu: Fix number of pages while using 64k pages
[ Upstream commit 0e14e062f5ff98aa15264dfa87c5f5e924028561 ]
Trying to record a trace on kernel with 64k pages resulted in -ENOMEM.
This happens due to a bug in calculating the number of table pages, which
returns zero. Fix the issue by rounding up.
$ perf record --kcore -e cs_etm/@tmc_etr55,cycacc,branch_broadcast/k --per-thread taskset --cpu-list 1 dd if=/dev/zero of=/dev/null
failed to mmap with 12 (Cannot allocate memory)
Fixes: 8ed536b1e283 ("coresight: catu: Add support for scatter gather tables")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250109215348.5483-1-ilkka@os.amperecomputing.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: William Breathitt Gray <wbg@kernel.org>
Date: Wed Mar 5 19:01:19 2025 +0900
counter: microchip-tcb-capture: Fix undefined counter channel state on probe
commit c0c9c73434666dc99ee156b25e7e722150bee001 upstream.
Hardware initialize of the timer counter channel does not occur on probe
thus leaving the Count in an undefined state until the first
function_write() callback is executed. Fix this by performing the proper
hardware initialization during probe.
Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
Reported-by: Csókás Bence <csokas.bence@prolan.hu>
Closes: https://lore.kernel.org/all/bfa70e78-3cc3-4295-820b-3925c26135cb@prolan.hu/
Link: https://lore.kernel.org/r/20250305-preset-capture-mode-microchip-tcb-capture-v1-1-632c95c6421e@kernel.org
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Date: Mon Feb 24 18:06:57 2025 +0100
counter: stm32-lptimer-cnt: fix error handling when enabling
commit 8744dcd4fc7800de2eb9369410470bb2930d4c14 upstream.
In case the stm32_lptim_set_enable_state() fails to update CMP and ARR,
a timeout error is raised, by regmap_read_poll_timeout. It may happen,
when the lptimer runs on a slow clock, and the clock is gated only
few times during the polling.
Badly, when this happen, STM32_LPTIM_ENABLE in CR register has been set.
So the 'enable' state in sysfs wrongly lies on the counter being
correctly enabled, due to CR is read as one in stm32_lptim_is_enabled().
To fix both issues:
- enable the clock before writing CMP, ARR and polling ISR bits. It will
avoid the possible timeout error.
- clear the ENABLE bit in CR and disable the clock in the error path.
Fixes: d8958824cf07 ("iio: counter: Add support for STM32 LPTimer")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250224170657.3368236-1-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jie Zhan <zhanjie9@hisilicon.com>
Date: Thu Feb 13 11:55:10 2025 +0800
cpufreq: governor: Fix negative 'idle_time' handling in dbs_update()
[ Upstream commit 3698dd6b139dc37b35a9ad83d9330c1f99666c02 ]
We observed an issue that the CPU frequency can't raise up with a 100% CPU
load when NOHZ is off and the 'conservative' governor is selected.
'idle_time' can be negative if it's obtained from get_cpu_idle_time_jiffy()
when NOHZ is off. This was found and explained in commit 9485e4ca0b48
("cpufreq: governor: Fix handling of special cases in dbs_update()").
However, commit 7592019634f8 ("cpufreq: governors: Fix long idle detection
logic in load calculation") introduced a comparison between 'idle_time' and
'samling_rate' to detect a long idle interval. While 'idle_time' is
converted to int before comparison, it's actually promoted to unsigned
again when compared with an unsigned 'sampling_rate'. Hence, this leads to
wrong idle interval detection when it's in fact 100% busy and sets
policy_dbs->idle_periods to a very large value. 'conservative' adjusts the
frequency to minimum because of the large 'idle_periods', such that the
frequency can't raise up. 'Ondemand' doesn't use policy_dbs->idle_periods
so it fortunately avoids the issue.
Correct negative 'idle_time' to 0 before any use of it in dbs_update().
Fixes: 7592019634f8 ("cpufreq: governors: Fix long idle detection logic in load calculation")
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250213035510.2402076-1-zhanjie9@hisilicon.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: zuoqian <zuoqian113@gmail.com>
Date: Sat Jan 25 08:49:49 2025 +0000
cpufreq: scpi: compare kHz instead of Hz
[ Upstream commit 4742da9774a416908ef8e3916164192c15c0e2d1 ]
The CPU rate from clk_get_rate() may not be divisible by 1000
(e.g., 133333333). But the rate calculated from frequency(kHz) is
always divisible by 1000 (e.g., 133333000).
Comparing the rate causes a warning during CPU scaling:
"cpufreq: __target_index: Failed to change cpu frequency: -5".
When we choose to compare kHz here, the issue does not occur.
Fixes: 343a8d17fa8d ("cpufreq: scpi: remove arm_big_little dependency")
Signed-off-by: zuoqian <zuoqian113@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wenkai Lin <linwenkai6@hisilicon.com>
Date: Wed Feb 5 11:56:26 2025 +0800
crypto: hisilicon/sec2 - fix for aead auth key length
[ Upstream commit 1b284ffc30b02808a0de698667cbcf5ce5f9144e ]
According to the HMAC RFC, the authentication key
can be 0 bytes, and the hardware can handle this
scenario. Therefore, remove the incorrect validation
for this case.
Fixes: 2f072d75d1ab ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Kelley <mhklinux@outlook.com>
Date: Sun Mar 9 20:52:08 2025 -0700
Drivers: hv: vmbus: Don't release fb_mmio resource in vmbus_free_mmio()
[ Upstream commit 73fe9073c0cc28056cb9de0c8a516dac070f1d1f ]
The VMBus driver manages the MMIO space it owns via the hyperv_mmio
resource tree. Because the synthetic video framebuffer portion of the
MMIO space is initially setup by the Hyper-V host for each guest, the
VMBus driver does an early reserve of that portion of MMIO space in the
hyperv_mmio resource tree. It saves a pointer to that resource in
fb_mmio. When a VMBus driver requests MMIO space and passes "true"
for the "fb_overlap_ok" argument, the reserved framebuffer space is
used if possible. In that case it's not necessary to do another request
against the "shadow" hyperv_mmio resource tree because that resource
was already requested in the early reserve steps.
However, the vmbus_free_mmio() function currently does no special
handling for the fb_mmio resource. When a framebuffer device is
removed, or the driver is unbound, the current code for
vmbus_free_mmio() releases the reserved resource, leaving fb_mmio
pointing to memory that has been freed. If the same or another
driver is subsequently bound to the device, vmbus_allocate_mmio()
checks against fb_mmio, and potentially gets garbage. Furthermore
a second unbind operation produces this "nonexistent resource" error
because of the unbalanced behavior between vmbus_allocate_mmio() and
vmbus_free_mmio():
[ 55.499643] resource: Trying to free nonexistent
resource <0x00000000f0000000-0x00000000f07fffff>
Fix this by adding logic to vmbus_free_mmio() to recognize when
MMIO space in the fb_mmio reserved area would be released, and don't
release it. This filtering ensures the fb_mmio resource always exists,
and makes vmbus_free_mmio() more parallel with vmbus_allocate_mmio().
Fixes: be000f93e5d7 ("drivers:hv: Track allocations of children of hv_vmbus in private resource tree")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250310035208.275764-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250310035208.275764-1-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lee Jones <lee@kernel.org>
Date: Wed Jan 13 08:07:28 2021 +0000
drm/amd/display/dc/core/dc_resource: Staticify local functions
[ Upstream commit c88855f3a50903721c4e1dda16cb42b5f5432b5c ]
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1120:5: warning: no previous prototype for ‘shift_border_left_to_dst’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1131:6: warning: no previous prototype for ‘restore_border_left_from_dst’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 374c9faac5a7 ("drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alex Hung <alex.hung@amd.com>
Date: Thu Feb 27 16:36:25 2025 -0700
drm/amd/display: Assign normalized_pix_clk when color depth = 14
commit 79e31396fdd7037c503e6add15af7cb00633ea92 upstream.
[WHY & HOW]
A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397
calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the
display_color_depth == COLOR_DEPTH_141414 is not handled. This is
observed in Radeon RX 6600 XT.
It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests.
Also fixes the indentation in get_norm_pix_clk.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 274a87eb389f58eddcbc5659ab0b180b37e92775)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michael Strauss <michael.strauss@amd.com>
Date: Wed Mar 23 16:06:25 2022 -0400
drm/amd/display: Check for invalid input params when building scaling params
[ Upstream commit 73b1da69f5314d96e1f963468863eaa884ee1030 ]
[WHY]
Function to calculate scaling ratios can be called with invalid plane
src/dest, causing a divide by zero.
[HOW]
Fail building scaling params if plane state src/dest rects are
unpopulated
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 374c9faac5a7 ("drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mario Kleiner <mario.kleiner.de@gmail.com>
Date: Mon Dec 28 19:50:58 2020 +0100
drm/amd/display: Check plane scaling against format specific hw plane caps.
[ Upstream commit 6300b3bd9d0d7afaf085dd086ce6258511c3f057 ]
This takes hw constraints specific to pixel formats into account,
e.g., the inability of older hw to scale fp16 format framebuffers.
It should now allow safely to enable fp16 formats also on DCE-8,
DCE-10, DCE-11.0
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 374c9faac5a7 ("drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Wed Feb 26 16:37:31 2025 +0800
drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params
[ Upstream commit 374c9faac5a763a05bc3f68ad9f73dab3c6aec90 ]
Null pointer dereference issue could occur when pipe_ctx->plane_state
is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not
null before accessing. This prevents a null pointer dereference.
Found by code review.
Fixes: 3be5262e353b ("drm/amd/display: Rename more dc_surface stuff to plane_state")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 63e6a77ccf239337baa9b1e7787cde9fa0462092)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Date: Mon May 10 10:19:18 2021 -0400
drm/amd/display: fix odm scaling
[ Upstream commit 6566cae7aef30da8833f1fa0eb854baf33b96676 ]
There are two issues with scaling calculations, odm recout
calculation and matching viewport to actual recout.
This change fixes both issues. Odm recout calculation via
special casing and viewport matching issue by reworking
the viewport calcualtion to use scaling ratios and recout
to derrive the required offset and size.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 374c9faac5a7 ("drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Fri Feb 28 13:18:14 2025 -0600
drm/amd/display: Fix slab-use-after-free on hdcp_work
commit e65e7bea220c3ce8c4c793b4ba35557f4994ab2b upstream.
[Why]
A slab-use-after-free is reported when HDCP is destroyed but the
property_validate_dwork queue is still running.
[How]
Cancel the delayed work when destroying workqueue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006
Fixes: da3fd7ac0bcf ("drm/amd/display: Update CP property based on HW query")
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 725a04ba5a95e89c89633d4322430cfbca7ce128)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Date: Thu Feb 27 01:28:51 2025 +0500
drm/amd/display: fix type mismatch in CalculateDynamicMetadataParameters()
[ Upstream commit c3c584c18c90a024a54716229809ba36424f9660 ]
There is a type mismatch between what CalculateDynamicMetadataParameters()
takes and what is passed to it. Currently this function accepts several
args as signed long but it's called with unsigned integers and integer. On
some systems where long is 32 bits and one of these unsigned int params is
greater than INT_MAX it may cause passing input params as negative values.
Fix this by changing these argument types from long to unsigned int and to
int respectively. Also this will align the function's definition with
similar functions in other dcn* drivers.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 6725a88f88a7 ("drm/amd/display: Add DCN3 DML")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikola Cornij <nikola.cornij@amd.com>
Date: Thu Jan 21 22:35:54 2021 -0500
drm/amd/display: Reject too small viewport size when validating plane
[ Upstream commit 40d916a2602c8920e0f04a49abfd1ff7c1e54e91 ]
[why]
Overlay won't move to a new positon if viewport size is smaller than
what can be handled. It'd either disappear or stay at the old
position. This condition is for example hit if overlay is moved too
much outside of left or top edge of the screen, but it applies to
any non-cursor plane type.
[how]
Reject this contidion at validation time. This gives the calling
level a chance to handle this gracefully and avoid inconsistent
behaivor.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 374c9faac5a7 ("drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hersen Wu <hersenxs.wu@amd.com>
Date: Fri Apr 26 16:39:37 2024 -0400
drm/amd/display: Skip inactive planes within ModeSupportAndSystemConfiguration
commit a54f7e866cc73a4cb71b8b24bb568ba35c8969df upstream.
[Why]
Coverity reports Memory - illegal accesses.
[How]
Skip inactive planes.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[get_pipe_idx() was introduced as a helper by
dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321") in v6.0.
This patch backports it to make code clearer. And minor conflict is
resolved due to code context change.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jesse Zhang <jesse.zhang@amd.com>
Date: Tue Apr 30 10:23:48 2024 +0800
drm/amd/pm: Fix negative array index read
commit c8c19ebf7c0b202a6a2d37a52ca112432723db5f upstream.
Avoid using the negative values
for clk_idex as an index into an array pptable->DpmDescriptor.
V2: fix clk_index return check (Tim Huang)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Minor conflict resolved due to code context change.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Date: Wed Oct 27 16:27:30 2021 +0200
drm/amdgpu: Fix even more out of bound writes from debugfs
commit 3f4e54bd312d3dafb59daf2b97ffa08abebe60f5 upstream.
CVE-2021-42327 was fixed by:
commit f23750b5b3d98653b31d4469592935ef6364ad67
Author: Thelford Williams <tdwilliamsiv@gmail.com>
Date: Wed Oct 13 16:04:13 2021 -0400
drm/amdgpu: fix out of bounds write
but amdgpu_dm_debugfs.c contains more of the same issue so fix the
remaining ones.
v2:
* Add missing fix in dp_max_bpc_write (Harry Wentland)
Fixes: 918698d5c2b5 ("drm/amd/display: Return the number of bytes parsed than allocated")
Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[ Cherry-pick the fix and drop the following functions which were introduced
since 5.13 or later: dp_max_bpc_write() was introduced in commit cca912e0a6b4
("drm/amd/display: Add max bpc debugfs") dp_dsc_passthrough_set() was
introduced in commit fcd1e484c8ae ("drm/amd/display: Add debugfs entry for
dsc passthrough"). ]
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Feb 19 18:02:39 2025 +0200
drm/atomic: Filter out redundant DPMS calls
commit de93ddf88088f7624b589d0ff3af9effb87e8f3b upstream.
Video players (eg. mpv) do periodic XResetScreenSaver() calls to
keep the screen on while the video playing. The modesetting ddx
plumbs these straight through into the kernel as DPMS setproperty
ioctls, without any filtering whatsoever. When implemented via
atomic these end up as empty commits on the crtc (which will
nonetheless take one full frame), which leads to a dropped
frame every time XResetScreenSaver() is called.
Let's just filter out redundant DPMS property changes in the
kernel to avoid this issue.
v2: Explain the resulting commits a bit better (Sima)
Document the behaviour in uapi docs (Sima)
Cc: stable@vger.kernel.org
Testcase: igt/kms_flip/flip-vs-dpms-on-nop
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250219160239.17502-1-ville.syrjala@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wayne Lin <Wayne.Lin@amd.com>
Date: Mon Jan 13 17:10:59 2025 +0800
drm/dp_mst: Fix drm RAD print
[ Upstream commit 6bbce873a9c97cb12f5455c497be279ac58e707f ]
[Why]
The RAD of sideband message printed today is incorrect.
For RAD stored within MST branch
- If MST branch LCT is 1, it's RAD array is untouched and remained as 0.
- If MST branch LCT is larger than 1, use nibble to store the up facing
port number in cascaded sequence as illustrated below:
u8 RAD[0] = (LCT_2_UFP << 4) | LCT_3_UFP
RAD[1] = (LCT_4_UFP << 4) | LCT_5_UFP
...
In drm_dp_mst_rad_to_str(), it wrongly to use BIT_MASK(4) to fetch the port
number of one nibble.
[How]
Adjust the code by:
- RAD array items are valuable only for LCT >= 1.
- Use 0xF as the mask to replace BIT_MASK(4)
V2:
- Document how RAD is constructed (Imre)
V3:
- Adjust the comment for rad[] so kdoc formats it properly (Lyude)
Fixes: 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113091100.3314533-2-Wayne.Lin@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ivan Abramov <i.abramov@mt-integration.ru>
Date: Thu Mar 6 14:20:45 2025 +0300
drm/gma500: Add NULL check for pci_gfx_root in mid_get_vbt_data()
[ Upstream commit 9af152dcf1a06f589f44a74da4ad67e365d4db9a ]
Since pci_get_domain_bus_and_slot() can return NULL, add NULL check for
pci_gfx_root in the mid_get_vbt_data().
This change is similar to the checks implemented in mid_get_fuse_settings()
and mid_get_pci_revID(), which were introduced by commit 0cecdd818cd7
("gma500: Final enables for Oaktrail") as "additional minor
bulletproofing".
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: f910b411053f ("gma500: Add the glue to the various BIOS and firmware interfaces")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306112046.17144-1-i.abramov@mt-integration.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Wed Jan 8 12:35:57 2025 +0300
drm/mediatek: dsi: fix error codes in mtk_dsi_host_transfer()
[ Upstream commit dcb166ee43c3d594e7b73a24f6e8cf5663eeff2c ]
There is a type bug because the return statement:
return ret < 0 ? ret : recv_cnt;
The issue is that ret is an int, recv_cnt is a u32 and the function
returns ssize_t, which is a signed long. The way that the type promotion
works is that the negative error codes are first cast to u32 and then
to signed long. The error codes end up being positive instead of
negative and the callers treat them as success.
Fixes: 81cc7e51c4f1 ("drm/mediatek: Allow commands to be sent during video mode")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202412210801.iADw0oIH-lkp@intel.com/
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/b754a408-4f39-4e37-b52d-7706c132e27f@stanley.mountain/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Mon Feb 17 16:48:12 2025 +0100
drm/mediatek: mtk_hdmi: Fix typo for aud_sampe_size member
[ Upstream commit 72fcb88e7bbc053ed4fc74cebb0315b98a0f20c3 ]
Rename member aud_sampe_size of struct hdmi_audio_param to
aud_sample_size to fix a typo and enhance readability.
This commit brings no functional changes.
Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250217154836.108895-20-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Mon Feb 17 16:48:10 2025 +0100
drm/mediatek: mtk_hdmi: Unregister audio platform device on failure
[ Upstream commit 0be123cafc06eed0fd1227166a66e786434b0c50 ]
The probe function of this driver may fail after registering the
audio platform device: in that case, the state is not getting
cleaned up, leaving this device registered.
Adding up to the mix, should the probe function of this driver
return a probe deferral for N times, we're registering up to N
audio platform devices and, again, never freeing them up.
To fix this, add a pointer to the audio platform device in the
mtk_hdmi structure, and add a devm action to unregister it upon
driver removal or probe failure.
Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250217154836.108895-18-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Zimmermann <tzimmermann@suse.de>
Date: Tue Jan 14 10:57:25 2025 +0100
drm/nouveau: Do not override forced connector status
[ Upstream commit 01f1d77a2630e774ce33233c4e6723bca3ae9daa ]
Keep user-forced connector status even if it cannot be programmed. Same
behavior as for the rest of the drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114100214.195386-1-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Date: Tue Mar 11 14:14:59 2025 +0300
drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse()
commit dd8689b52a24807c2d5ce0a17cb26dc87f75235c upstream.
On the off chance that command stream passed from userspace via
ioctl() call to radeon_vce_cs_parse() is weirdly crafted and
first command to execute is to encode (case 0x03000001), the function
in question will attempt to call radeon_vce_cs_reloc() with size
argument that has not been properly initialized. Specifically, 'size'
will point to 'tmp' variable before the latter had a chance to be
assigned any value.
Play it safe and init 'tmp' with 0, thus ensuring that
radeon_vce_cs_reloc() will catch an early error in cases like these.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 2fc5703abda2 ("drm/radeon: check VCE relocation buffer range v3")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2d52de55f9ee7aaee0e09ac443f77855989c6b68)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maíra Canal <mcanal@igalia.com>
Date: Thu Mar 13 11:43:26 2025 -0300
drm/v3d: Don't run jobs that have errors flagged in its fence
commit 80cbee810e4e13cdbd3ae9654e9ecddf17f3e828 upstream.
The V3D driver still relies on `drm_sched_increase_karma()` and
`drm_sched_resubmit_jobs()` for resubmissions when a timeout occurs.
The function `drm_sched_increase_karma()` marks the job as guilty, while
`drm_sched_resubmit_jobs()` sets an error (-ECANCELED) in the DMA fence of
that guilty job.
Because of this, we must check whether the job’s DMA fence has been
flagged with an error before executing the job. Otherwise, the same guilty
job may be resubmitted indefinitely, causing repeated GPU resets.
This patch adds a check for an error on the job's fence to prevent running
a guilty job that was previously flagged when the GPU timed out.
Note that the CPU and CACHE_CLEAN queues do not require this check, as
their jobs are executed synchronously once the DRM scheduler starts them.
Cc: stable@vger.kernel.org
Fixes: d223f98f0209 ("drm/v3d: Add support for compute shader dispatch.")
Fixes: 1584f16ca96e ("drm/v3d: Add support for submitting jobs to the TFU.")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-v3d-gpu-reset-fixes-v4-1-c1e780d8e096@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Date: Wed Jan 15 11:03:39 2025 +0200
drm: xlnx: zynqmp: Fix max dma segment size
[ Upstream commit 28b529a98525123acd37372a04d21e87ec2edcf7 ]
Fix "mapping sg segment longer than device claims to support" warning by
setting the max segment size.
Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115-xilinx-formats-v2-10-160327ca652a@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Date: Mon Mar 10 09:14:02 2025 +0800
EDAC/ie31200: Fix the DIMM size mask for several SoCs
[ Upstream commit 3427befbbca6b19fe0e37f91d66ce5221de70bf1 ]
The DIMM size mask for {Sky, Kaby, Coffee} Lake is not bits{7:0},
but bits{5:0}. Fix it.
Fixes: 953dee9bbd24 ("EDAC, ie31200_edac: Add Skylake support")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-3-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Date: Mon Mar 10 09:14:03 2025 +0800
EDAC/ie31200: Fix the error path order of ie31200_init()
[ Upstream commit 231e341036d9988447e3b3345cf741a98139199e ]
The error path order of ie31200_init() is incorrect, fix it.
Fixes: 709ed1bcef12 ("EDAC/ie31200: Fallback if host bridge device is already initialized")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-4-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Date: Mon Mar 10 09:14:01 2025 +0800
EDAC/ie31200: Fix the size of EDAC_MC_LAYER_CHIP_SELECT layer
[ Upstream commit d59d844e319d97682c8de29b88d2d60922a683b3 ]
The EDAC_MC_LAYER_CHIP_SELECT layer pertains to the rank, not the DIMM.
Fix its size to reflect the number of ranks instead of the number of DIMMs.
Also delete the unused macros IE31200_{DIMMS,RANKS}.
Fixes: 7ee40b897d18 ("ie31200_edac: Introduce the driver")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-2-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yuezhang Mo <Yuezhang.Mo@sony.com>
Date: Mon Mar 17 10:53:10 2025 +0800
exfat: fix the infinite loop in exfat_find_last_cluster()
[ Upstream commit b0522303f67255926b946aa66885a0104d1b2980 ]
In exfat_find_last_cluster(), the cluster chain is traversed until
the EOF cluster. If the cluster chain includes a loop due to file
system corruption, the EOF cluster cannot be traversed, resulting
in an infinite loop.
If the number of clusters indicated by the file size is inconsistent
with the cluster chain length, exfat_find_last_cluster() will return
an error, so if this inconsistency is found, the traversal can be
aborted without traversing to the EOF cluster.
Reported-by: syzbot+f7d147e6db52b1e09dba@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f7d147e6db52b1e09dba
Tested-by: syzbot+f7d147e6db52b1e09dba@syzkaller.appspotmail.com
Fixes: 31023864e67a ("exfat: add fat entry operations")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Theodore Ts'o <tytso@mit.edu>
Date: Fri Mar 14 00:38:42 2025 -0400
ext4: don't over-report free space or inodes in statvfs
commit f87d3af7419307ae26e705a2b2db36140db367a2 upstream.
This fixes an analogus bug that was fixed in xfs in commit
4b8d867ca6e2 ("xfs: don't over-report free space or inodes in
statvfs") where statfs can report misleading / incorrect information
where project quota is enabled, and the free space is less than the
remaining quota.
This commit will resolve a test failure in generic/762 which tests for
this bug.
Cc: stable@kernel.org
Fixes: 689c958cbe6b ("ext4: add project quota support")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Acs, Jakub <acsjakub@amazon.de>
Date: Thu Mar 20 15:46:49 2025 +0000
ext4: fix OOB read when checking dotdot dir
commit d5e206778e96e8667d3bde695ad372c296dc9353 upstream.
Mounting a corrupted filesystem with directory which contains '.' dir
entry with rec_len == block size results in out-of-bounds read (later
on, when the corrupted directory is removed).
ext4_empty_dir() assumes every ext4 directory contains at least '.'
and '..' as directory entries in the first data block. It first loads
the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry()
and then uses its rec_len member to compute the location of '..' dir
entry (in ext4_next_entry). It assumes the '..' dir entry fits into the
same data block.
If the rec_len of '.' is precisely one block (4KB), it slips through the
sanity checks (it is considered the last directory entry in the data
block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the
memory slot allocated to the data block. The following call to
ext4_check_dir_entry() on new value of de then dereferences this pointer
which results in out-of-bounds mem access.
Fix this by extending __ext4_check_dir_entry() to check for '.' dir
entries that reach the end of data block. Make sure to ignore the phony
dir entries for checksum (by checking name_len for non-zero).
Note: This is reported by KASAN as use-after-free in case another
structure was recently freed from the slot past the bound, but it is
really an OOB read.
This issue was found by syzkaller tool.
Call Trace:
[ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710
[ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375
[ 38.595158]
[ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1
[ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 38.595304] Call Trace:
[ 38.595308] <TASK>
[ 38.595311] dump_stack_lvl+0xa7/0xd0
[ 38.595325] print_address_description.constprop.0+0x2c/0x3f0
[ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595349] print_report+0xaa/0x250
[ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595368] ? kasan_addr_to_slab+0x9/0x90
[ 38.595378] kasan_report+0xab/0xe0
[ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595400] __ext4_check_dir_entry+0x67e/0x710
[ 38.595410] ext4_empty_dir+0x465/0x990
[ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10
[ 38.595432] ext4_rmdir.part.0+0x29a/0xd10
[ 38.595441] ? __dquot_initialize+0x2a7/0xbf0
[ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10
[ 38.595464] ? __pfx___dquot_initialize+0x10/0x10
[ 38.595478] ? down_write+0xdb/0x140
[ 38.595487] ? __pfx_down_write+0x10/0x10
[ 38.595497] ext4_rmdir+0xee/0x140
[ 38.595506] vfs_rmdir+0x209/0x670
[ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190
[ 38.595529] do_rmdir+0x363/0x3c0
[ 38.595537] ? __pfx_do_rmdir+0x10/0x10
[ 38.595544] ? strncpy_from_user+0x1ff/0x2e0
[ 38.595561] __x64_sys_unlinkat+0xf0/0x130
[ 38.595570] do_syscall_64+0x5b/0x180
[ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: ac27a0ec112a0 ("[PATCH] ext4: initial copy of files from ext3")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: linux-ext4@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Mahmoud Adam <mngyadam@amazon.com>
Cc: stable@vger.kernel.org
Cc: security@kernel.org
Link: https://patch.msgid.link/b3ae36a6794c4a01944c7d70b403db5b@amazon.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Markus Elfring <elfring@users.sourceforge.net>
Date: Thu Apr 13 21:35:36 2023 +0200
fbdev: au1100fb: Move a variable assignment behind a null pointer check
[ Upstream commit 2df2c0caaecfd869b49e14f2b8df822397c5dd7f ]
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “au1100fb_setmode”.
This issue was detected by using the Coccinelle software.
Fixes: 3b495f2bb749 ("Au1100 FB driver uplift for 2.6.")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Kelley <mhklinux@outlook.com>
Date: Sun Feb 9 15:52:52 2025 -0800
fbdev: hyperv_fb: iounmap() the correct memory when removing a device
[ Upstream commit 7241c886a71797cc51efc6fadec7076fcf6435c2 ]
When a Hyper-V framebuffer device is removed, or the driver is unbound
from a device, any allocated and/or mapped memory must be released. In
particular, MMIO address space that was mapped to the framebuffer must
be unmapped. Current code unmaps the wrong address, resulting in an
error like:
[ 4093.980597] iounmap: bad address 00000000c936c05c
followed by a stack dump.
Commit d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for
Hyper-V frame buffer driver") changed the kind of address stored in
info->screen_base, and the iounmap() call in hvfb_putmem() was not
updated accordingly.
Fix this by updating hvfb_putmem() to unmap the correct address.
Fixes: d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250209235252.2987-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250209235252.2987-1-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Danila Chernetsov <listdansp@mail.ru>
Date: Wed Mar 19 01:30:11 2025 +0000
fbdev: sm501fb: Add some geometry checks.
[ Upstream commit aee50bd88ea5fde1ff4cc021385598f81a65830c ]
Added checks for xoffset, yoffset settings.
Incorrect settings of these parameters can lead to errors
in sm501fb_pan_ functions.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5fc404e47bdf ("[PATCH] fb: SM501 framebuffer driver")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Date: Tue Dec 24 12:34:56 2024 +0900
firmware: imx-scu: fix OF node leak in .probe()
[ Upstream commit fbf10b86f6057cf79300720da4ea4b77e6708b0d ]
imx_scu_probe() calls of_parse_phandle_with_args(), but does not
release the OF node reference obtained by it. Add a of_node_put() call
after done with the node.
Fixes: f25a066d1a07 ("firmware: imx-scu: Support one TX and one RX")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bart Van Assche <bvanassche@acm.org>
Date: Wed Mar 19 14:02:22 2025 -0700
fs/procfs: fix the comment above proc_pid_wchan()
[ Upstream commit 6287fbad1cd91f0c25cdc3a580499060828a8f30 ]
proc_pid_wchan() used to report kernel addresses to user space but that is
no longer the case today. Bring the comment above proc_pid_wchan() in
sync with the implementation.
Link: https://lkml.kernel.org/r/20250319210222.1518771-1-bvanassche@acm.org
Fixes: b2f73922d119 ("fs/proc, core/debug: Don't expose absolute kernel addresses via wchan")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miklos Szeredi <mszeredi@redhat.com>
Date: Thu Feb 20 11:02:58 2025 +0100
fuse: don't truncate cached, mutated symlink
[ Upstream commit b4c173dfbb6c78568578ff18f9e8822d7bd0e31b ]
Fuse allows the value of a symlink to change and this property is exploited
by some filesystems (e.g. CVMFS).
It has been observed, that sometimes after changing the symlink contents,
the value is truncated to the old size.
This is caused by fuse_getattr() racing with fuse_reverse_inval_inode().
fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which
results in fuse_change_attributes() exiting before updating the cached
attributes
This is okay, as the cached attributes remain invalid and the next call to
fuse_change_attributes() will likely update the inode with the correct
values.
The reason this causes problems is that cached symlinks will be
returned through page_get_link(), which truncates the symlink to
inode->i_size. This is correct for filesystems that don't mutate
symlinks, but in this case it causes bad behavior.
The solution is to just remove this truncation. This can cause a
regression in a filesystem that relies on supplying a symlink larger than
the file size, but this is unlikely. If that happens we'd need to make
this behavior conditional.
Reported-by: Laura Promberger <laura.promberger@cern.ch>
Tested-by: Sam Lewis <samclewis@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Terry Junge <linuxhid@cosmicgizmosystems.com>
Date: Fri Jan 17 16:58:38 2025 -0800
HID: hid-plantronics: Add mic mute mapping and generalize quirks
commit 9821709af892be9fbf4ee9a50b2f3e0604295ce0 upstream.
Add mapping for headset mute key events.
Remove PLT_QUIRK_DOUBLE_VOLUME_KEYS quirk and made it generic.
The quirk logic did not keep track of the actual previous key
so any key event occurring in less than or equal to 5ms was ignored.
Remove PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS quirk.
It had the same logic issue as the double key quirk and was actually
masking the as designed behavior of most of the headsets.
It's occurrence should be minimized with the ALSA control naming
quirk that is part of the patch set.
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Date: Wed Jan 15 15:00:20 2025 +0800
HID: ignore non-functional sensor in HP 5MP Camera
[ Upstream commit 363236d709e75610b628c2a4337ccbe42e454b6d ]
The HP 5MP Camera (USB ID 0408:5473) reports a HID sensor interface that
is not actually implemented. Attempting to access this non-functional
sensor via iio_info causes system hangs as runtime PM tries to wake up
an unresponsive sensor.
[453] hid-sensor-hub 0003:0408:5473.0003: Report latency attributes: ffffffff:ffffffff
[453] hid-sensor-hub 0003:0408:5473.0003: common attributes: 5:1, 2:1, 3:1 ffffffff:ffffffff
Add this device to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhang Lixu <lixu.zhang@intel.com>
Date: Wed Jan 22 09:29:00 2025 +0800
HID: intel-ish-hid: fix the length of MNG_SYNC_FW_CLOCK in doorbell
[ Upstream commit 4b54ae69197b9f416baa0fceadff7e89075f8454 ]
The timestamps in the Firmware log and HID sensor samples are incorrect.
They show 1970-01-01 because the current IPC driver only uses the first
8 bytes of bootup time when synchronizing time with the firmware. The
firmware converts the bootup time to UTC time, which results in the
display of 1970-01-01.
In write_ipc_from_queue(), when sending the MNG_SYNC_FW_CLOCK message,
the clock is updated according to the definition of ipc_time_update_msg.
However, in _ish_sync_fw_clock(), the message length is specified as the
size of uint64_t when building the doorbell. As a result, the firmware
only receives the first 8 bytes of struct ipc_time_update_msg.
This patch corrects the length in the doorbell to ensure the entire
ipc_time_update_msg is sent, fixing the timestamp issue.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Thu Jan 16 18:07:45 2025 +0200
hrtimers: Mark is_migration_base() with __always_inline
[ Upstream commit 27af31e44949fa85550176520ef7086a0d00fd7b ]
When is_migration_base() is unused, it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:
kernel/time/hrtimer.c:156:20: error: unused function 'is_migration_base' [-Werror,-Wunused-function]
156 | static inline bool is_migration_base(struct hrtimer_clock_base *base)
| ^~~~~~~~~~~~~~~~~
Fix this by marking it with __always_inline.
[ tglx: Use __always_inline instead of __maybe_unused and move it into the
usage sites conditional ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250116160745.243358-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tasos Sahanidis <tasos@tasossah.com>
Date: Wed Mar 12 05:08:32 2025 +0200
hwmon: (nct6775-core) Fix out of bounds access for NCT679{8,9}
[ Upstream commit 815f80ad20b63830949a77c816e35395d5d55144 ]
pwm_num is set to 7 for these chips, but NCT6776_REG_PWM_MODE and
NCT6776_PWM_MODE_MASK only contain 6 values.
Fix this by adding another 0 to the end of each array.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250312030832.106475-1-tasos@tasossah.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Mon Mar 3 20:53:08 2025 +0100
i2c: ali1535: Fix an error handling path in ali1535_probe()
[ Upstream commit 9b5463f349d019a261f1e80803447efca3126151 ]
If i2c_add_adapter() fails, the request_region() call in ali1535_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/0daf63d7a2ce74c02e2664ba805bbfadab7d25e5.1741031571.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Mon Mar 3 20:58:06 2025 +0100
i2c: ali15x3: Fix an error handling path in ali15x3_probe()
[ Upstream commit 6e55caaf30c88209d097e575a169b1dface1ab69 ]
If i2c_add_adapter() fails, the request_region() call in ali15x3_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/9b2090cbcc02659f425188ea05f2e02745c4e67b.1741031878.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Mon Apr 11 21:07:51 2022 +0300
i2c: dev: check return value when calling dev_set_name()
commit 993eb48fa199b5f476df8204e652eff63dd19361 upstream.
If dev_set_name() fails, the dev_name() is null, check the return
value of dev_set_name() to avoid the null-ptr-deref.
Fixes: 1413ef638aba ("i2c: dev: Fix the race between the release of i2c_dev and cdev")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Feng Liu <Feng.Liu3@windriver.com>
Signed-off-by: He Zhe <Zhe.He@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andreas Kemnade <andreas@kemnade.info>
Date: Fri Feb 28 15:04:20 2025 +0100
i2c: omap: fix IRQ storms
commit 285df995f90e3d61d97f327d34b9659d92313314 upstream.
On the GTA04A5 writing a reset command to the gyroscope causes IRQ
storms because NACK IRQs are enabled and therefore triggered but not
acked.
Sending a reset command to the gyroscope by
i2cset 1 0x69 0x14 0xb6
with an additional debug print in the ISR (not the thread) itself
causes
[ 363.353515] i2c i2c-1: ioctl, cmd=0x720, arg=0xbe801b00
[ 363.359039] omap_i2c 48072000.i2c: addr: 0x0069, len: 2, flags: 0x0, stop: 1
[ 363.366180] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x1110)
[ 363.371673] omap_i2c 48072000.i2c: IRQ (ISR = 0x0010)
[ 363.376892] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.382263] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.387664] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
repeating till infinity
[...]
(0x2 = NACK, 0x100 = Bus free, which is not enabled)
Apparently no other IRQ bit gets set, so this stalls.
Do not ignore enabled interrupts and make sure they are acked.
If the NACK IRQ is not needed, it should simply not enabled, but
according to the above log, caring about it is necessary unless
the Bus free IRQ is enabled and handled. The assumption that is
will always come with a ARDY IRQ, which was the idea behind
ignoring it, proves wrong.
It is true for simple reads from an unused address.
To still avoid the i2cdetect trouble which is the reason for
commit c770657bd261 ("i2c: omap: Fix standard mode false ACK readings"),
avoid doing much about NACK in omap_i2c_xfer_data() which is used
by both IRQ mode and polling mode, so also the false detection fix
is extended to polling usage and IRQ storms are avoided.
By changing this, the hardirq handler is not needed anymore to filter
stuff.
The mentioned gyro reset now just causes a -ETIMEDOUT instead of
hanging the system.
Fixes: c770657bd261 ("i2c: omap: Fix standard mode false ACK readings").
CC: stable@kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250228140420.379498-1-andreas@kemnade.info
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Mon Mar 3 21:26:54 2025 +0100
i2c: sis630: Fix an error handling path in sis630_probe()
[ Upstream commit 2b22459792fcb4def9f0936d64575ac11a95a58d ]
If i2c_add_adapter() fails, the request_region() call in sis630_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3d607601f2c38e896b10207963c6ab499ca5c307.1741033587.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maher Sanalla <msanalla@nvidia.com>
Date: Thu Mar 13 16:20:17 2025 +0200
IB/mad: Check available slots before posting receive WRs
[ Upstream commit 37826f0a8c2f6b6add5179003b8597e32a445362 ]
The ib_post_receive_mads() function handles posting receive work
requests (WRs) to MAD QPs and is called in two cases:
1) When a MAD port is opened.
2) When a receive WQE is consumed upon receiving a new MAD.
Whereas, if MADs arrive during the port open phase, a race condition
might cause an extra WR to be posted, exceeding the QP’s capacity.
This leads to failures such as:
infiniband mlx5_0: ib_post_recv failed: -12
infiniband mlx5_0: Couldn't post receive WRs
infiniband mlx5_0: Couldn't start port
infiniband mlx5_0: Couldn't open port 1
Fix this by checking the current receive count before posting a new WR.
If the QP’s receive queue is full, do not post additional WRs.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/c4984ba3c3a98a5711a558bccefcad789587ecf1.1741875592.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Grzegorz Nitka <grzegorz.nitka@intel.com>
Date: Thu Jan 23 09:15:39 2025 +0100
ice: fix memory leak in aRFS after reset
[ Upstream commit 23d97f18901ef5e4e264e3b1777fe65c760186b5 ]
Fix aRFS (accelerated Receive Flow Steering) structures memory leak by
adding a checker to verify if aRFS memory is already allocated while
configuring VSI. aRFS objects are allocated in two cases:
- as part of VSI initialization (at probe), and
- as part of reset handling
However, VSI reconfiguration executed during reset involves memory
allocation one more time, without prior releasing already allocated
resources. This led to the memory leak with the following signature:
[root@os-delivery ~]# cat /sys/kernel/debug/kmemleak
unreferenced object 0xff3c1ca7252e6000 (size 8192):
comm "kworker/0:0", pid 8, jiffies 4296833052
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
[<ffffffff991ec485>] __kmalloc_cache_noprof+0x275/0x340
[<ffffffffc0a6e06a>] ice_init_arfs+0x3a/0xe0 [ice]
[<ffffffffc09f1027>] ice_vsi_cfg_def+0x607/0x850 [ice]
[<ffffffffc09f244b>] ice_vsi_setup+0x5b/0x130 [ice]
[<ffffffffc09c2131>] ice_init+0x1c1/0x460 [ice]
[<ffffffffc09c64af>] ice_probe+0x2af/0x520 [ice]
[<ffffffff994fbcd3>] local_pci_probe+0x43/0xa0
[<ffffffff98f07103>] work_for_cpu_fn+0x13/0x20
[<ffffffff98f0b6d9>] process_one_work+0x179/0x390
[<ffffffff98f0c1e9>] worker_thread+0x239/0x340
[<ffffffff98f14abc>] kthread+0xcc/0x100
[<ffffffff98e45a6d>] ret_from_fork+0x2d/0x50
[<ffffffff98e083ba>] ret_from_fork_asm+0x1a/0x30
...
Fixes: 28bf26724fdb ("ice: Implement aRFS")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Date: Mon Feb 17 14:01:28 2025 +0000
iio: accel: mma8452: Ensure error return on failure to matching oversampling ratio
[ Upstream commit df330c808182a8beab5d0f84a6cbc9cff76c61fc ]
If a match was not found, then the write_raw() callback would return
the odr index, not an error. Return -EINVAL if this occurs.
To avoid similar issues in future, introduce j, a new indexing variable
rather than using ret for this purpose.
Fixes: 79de2ee469aa ("iio: accel: mma8452: claim direct mode during write raw")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250217140135.896574-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuniyuki Iwashima <kuniyu@amazon.com>
Date: Tue Mar 11 18:03:25 2025 -0700
ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().
[ Upstream commit 9740890ee20e01f99ff1dde84c63dcf089fabb98 ]
fib_check_nh_v6_gw() expects that fib6_nh_init() cleans up everything
when it fails.
Commit 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh")
moved fib_nh_common_init() before alloc_percpu_gfp() within fib6_nh_init()
but forgot to add cleanup for fib6_nh->nh_common.nhc_pcpu_rth_output in
case it fails to allocate fib6_nh->rt6i_pcpu, resulting in memleak.
Let's call fib_nh_common_release() and clear nhc_pcpu_rth_output in the
error path.
Note that we can remove the fib6_nh_release() call in nh_create_ipv6()
later in net-next.git.
Fixes: 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250312010333.56001-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fernando Fernandez Mancera <ffmancera@riseup.net>
Date: Wed Apr 2 14:17:51 2025 +0200
ipv6: fix omitted netlink attributes when using RTEXT_FILTER_SKIP_STATS
[ Upstream commit 7ac6ea4a3e0898db76aecccd68fb2c403eb7d24e ]
Using RTEXT_FILTER_SKIP_STATS is incorrectly skipping non-stats IPv6
netlink attributes on link dump. This causes issues on userspace tools,
e.g iproute2 is not rendering address generation mode as it should due
to missing netlink attribute.
Move the filling of IFLA_INET6_STATS and IFLA_INET6_ICMP6STATS to a
helper function guarded by a flag check to avoid hitting the same
situation in the future.
Fixes: d5566fd72ec1 ("rtnetlink: RTEXT_FILTER_SKIP_STATS support to avoid dumping inet/inet6 stats")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402121751.3108-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wang Yufen <wangyufen@huawei.com>
Date: Tue Jun 7 20:00:27 2022 +0800
ipv6: Fix signed integer overflow in __ip6_append_data
commit f93431c86b631bbca5614c66f966bf3ddb3c2803 upstream.
Resurrect ubsan overflow checks and ubsan report this warning,
fix it by change the variable [length] type to size_t.
UBSAN: signed-integer-overflow in net/ipv6/ip6_output.c:1489:19
2147479552 + 8567 cannot be represented in type 'int'
CPU: 0 PID: 253 Comm: err Not tainted 5.16.0+ #1
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x214/0x230
show_stack+0x30/0x78
dump_stack_lvl+0xf8/0x118
dump_stack+0x18/0x30
ubsan_epilogue+0x18/0x60
handle_overflow+0xd0/0xf0
__ubsan_handle_add_overflow+0x34/0x44
__ip6_append_data.isra.48+0x1598/0x1688
ip6_append_data+0x128/0x260
udpv6_sendmsg+0x680/0xdd0
inet6_sendmsg+0x54/0x90
sock_sendmsg+0x70/0x88
____sys_sendmsg+0xe8/0x368
___sys_sendmsg+0x98/0xe0
__sys_sendmmsg+0xf4/0x3b8
__arm64_sys_sendmmsg+0x34/0x48
invoke_syscall+0x64/0x160
el0_svc_common.constprop.4+0x124/0x300
do_el0_svc+0x44/0xc8
el0_svc+0x3c/0x1e8
el0t_64_sync_handler+0x88/0xb0
el0t_64_sync+0x16c/0x170
Changes since v1:
-Change the variable [length] type to unsigned, as Eric Dumazet suggested.
Changes since v2:
-Don't change exthdrlen type in ip6_make_skb, as Paolo Abeni suggested.
Changes since v3:
-Don't change ulen type in udpv6_sendmsg and l2tp_ip6_sendmsg, as
Jakub Kicinski suggested.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/20220607120028.845916-1-wangyufen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Conflict due to f37a4cc6bb0b ("udp6: pass flow in ip6_make_skb
together with cork") not in the tree ]
Signed-off-by: Abdelkareem Abdelsaamad <kareemem@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kuniyuki Iwashima <kuniyu@amazon.com>
Date: Tue Mar 11 18:38:48 2025 -0700
ipv6: Set errno after ip_fib_metrics_init() in ip6_route_info_create().
[ Upstream commit 9a81fc3480bf5dbe2bf80e278c440770f6ba2692 ]
While creating a new IPv6, we could get a weird -ENOMEM when
RTA_NH_ID is set and either of the conditions below is true:
1) CONFIG_IPV6_SUBTREES is enabled and rtm_src_len is specified
2) nexthop_get() fails
e.g.)
# strace ip -6 route add fe80::dead:beef:dead:beef nhid 1 from ::
recvmsg(3, {msg_iov=[{iov_base=[...[
{error=-ENOMEM, msg=[... [...]]},
[{nla_len=49, nla_type=NLMSGERR_ATTR_MSG}, "Nexthops can not be used with so"...]
]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148
Let's set err explicitly after ip_fib_metrics_init() in
ip6_route_info_create().
Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250312013854.61125-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Mon Mar 10 10:45:53 2025 +0300
ipvs: prevent integer overflow in do_ip_vs_get_ctl()
[ Upstream commit 80b78c39eb86e6b55f56363b709eb817527da5aa ]
The get->num_services variable is an unsigned int which is controlled by
the user. The struct_size() function ensures that the size calculation
does not overflow an unsigned long, however, we are saving the result to
an int so the calculation can overflow.
Both "len" and "get->num_services" come from the user. This check is
just a sanity check to help the user and ensure they are using the API
correctly. An integer overflow here is not a big deal. This has no
security impact.
Save the result from struct_size() type size_t to fix this integer
overflow bug.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chengen Du <chengen.du@canonical.com>
Date: Tue Jan 14 12:12:34 2025 +0800
iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic()
[ Upstream commit 07e0d99a2f701123ad3104c0f1a1e66bce74d6e5 ]
When performing an iSCSI boot using IPv6, iscsistart still reads the
/sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix
length is 64, this causes the shift exponent to become negative,
triggering a UBSAN warning. As the concept of a subnet mask does not
apply to IPv6, the value is set to ~0 to suppress the warning message.
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Qasim Ijaz <qasdev00@gmail.com>
Date: Tue Feb 11 19:59:00 2025 +0000
isofs: fix KMSAN uninit-value bug in do_isofs_readdir()
[ Upstream commit 81a82e8f33880793029cd6f8a766fb13b737e6a7 ]
In do_isofs_readdir() when assigning the variable
"struct iso_directory_record *de" the b_data field of the buffer_head
is accessed and an offset is added to it, the size of b_data is 2048
and the offset size is 2047, meaning
"de = (struct iso_directory_record *) (bh->b_data + offset);"
yields the final byte of the 2048 sized b_data block.
The first byte of the directory record (de_len) is then read and
found to be 31, meaning the directory record size is 31 bytes long.
The directory record is defined by the structure:
struct iso_directory_record {
__u8 length; // 1 byte
__u8 ext_attr_length; // 1 byte
__u8 extent[8]; // 8 bytes
__u8 size[8]; // 8 bytes
__u8 date[7]; // 7 bytes
__u8 flags; // 1 byte
__u8 file_unit_size; // 1 byte
__u8 interleave; // 1 byte
__u8 volume_sequence_number[4]; // 4 bytes
__u8 name_len; // 1 byte
char name[]; // variable size
} __attribute__((packed));
The fixed portion of this structure occupies 33 bytes. Therefore, a
valid directory record must be at least 33 bytes long
(even without considering the variable-length name field).
Since de_len is only 31, it is insufficient to contain
the complete fixed header.
The code later hits the following sanity check that
compares de_len against the sum of de->name_len and
sizeof(struct iso_directory_record):
if (de_len < de->name_len[0] + sizeof(struct iso_directory_record)) {
...
}
Since the fixed portion of the structure is
33 bytes (up to and including name_len member),
a valid record should have de_len of at least 33 bytes;
here, however, de_len is too short, and the field de->name_len
(located at offset 32) is accessed even though it lies beyond
the available 31 bytes.
This access on the corrupted isofs data triggers a KASAN uninitialized
memory warning. The fix would be to first verify that de_len is at least
sizeof(struct iso_directory_record) before accessing any
fields like de->name_len.
Reported-by: syzbot <syzbot+812641c6c3d7586a1613@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+812641c6c3d7586a1613@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=812641c6c3d7586a1613
Fixes: 2deb1acc653c ("isofs: fix access to unallocated memory when reading corrupted filesystem")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250211195900.42406-1-qasdev00@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Roman Smirnov <r.smirnov@omp.ru>
Date: Wed Feb 26 11:25:22 2025 +0300
jfs: add index corruption check to DT_GETPAGE()
commit a8dfb2168906944ea61acfc87846b816eeab882d upstream.
If the file system is corrupted, the header.stblindex variable
may become greater than 127. Because of this, an array access out
of bounds may occur:
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dtree.c:3096:10
index 237 is out of range for type 'struct dtslot[128]'
CPU: 0 UID: 0 PID: 5822 Comm: syz-executor740 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_out_of_bounds+0x121/0x150 lib/ubsan.c:429
dtReadFirst+0x622/0xc50 fs/jfs/jfs_dtree.c:3096
dtReadNext fs/jfs/jfs_dtree.c:3147 [inline]
jfs_readdir+0x9aa/0x3c50 fs/jfs/jfs_dtree.c:2862
wrap_directory_iterator+0x91/0xd0 fs/readdir.c:65
iterate_dir+0x571/0x800 fs/readdir.c:108
__do_sys_getdents64 fs/readdir.c:403 [inline]
__se_sys_getdents64+0x1e2/0x4b0 fs/readdir.c:389
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace ]---
Add a stblindex check for corruption.
Reported-by: syzbot <syzbot+9120834fc227768625ba@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=9120834fc227768625ba
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qasim Ijaz <qasdev00@gmail.com>
Date: Thu Feb 13 21:05:53 2025 +0000
jfs: fix slab-out-of-bounds read in ea_get()
commit fdf480da5837c23b146c4743c18de97202fcab37 upstream.
During the "size_check" label in ea_get(), the code checks if the extended
attribute list (xattr) size matches ea_size. If not, it logs
"ea_get: invalid extended attribute" and calls print_hex_dump().
Here, EALIST_SIZE(ea_buf->xattr) returns 4110417968, which exceeds
INT_MAX (2,147,483,647). Then ea_size is clamped:
int size = clamp_t(int, ea_size, 0, EALIST_SIZE(ea_buf->xattr));
Although clamp_t aims to bound ea_size between 0 and 4110417968, the upper
limit is treated as an int, causing an overflow above 2^31 - 1. This leads
"size" to wrap around and become negative (-184549328).
The "size" is then passed to print_hex_dump() (called "len" in
print_hex_dump()), it is passed as type size_t (an unsigned
type), this is then stored inside a variable called
"int remaining", which is then assigned to "int linelen" which
is then passed to hex_dump_to_buffer(). In print_hex_dump()
the for loop, iterates through 0 to len-1, where len is
18446744073525002176, calling hex_dump_to_buffer()
on each iteration:
for (i = 0; i < len; i += rowsize) {
linelen = min(remaining, rowsize);
remaining -= rowsize;
hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize,
linebuf, sizeof(linebuf), ascii);
...
}
The expected stopping condition (i < len) is effectively broken
since len is corrupted and very large. This eventually leads to
the "ptr+i" being passed to hex_dump_to_buffer() to get closer
to the end of the actual bounds of "ptr", eventually an out of
bounds access is done in hex_dump_to_buffer() in the following
for loop:
for (j = 0; j < len; j++) {
if (linebuflen < lx + 2)
goto overflow2;
ch = ptr[j];
...
}
To fix this we should validate "EALIST_SIZE(ea_buf->xattr)"
before it is utilised.
Reported-by: syzbot <syzbot+4e6e7e4279d046613bc5@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+4e6e7e4279d046613bc5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=4e6e7e4279d046613bc5
Fixes: d9f9d96136cb ("jfs: xattr: check invalid xattr size more strictly")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sourabh Jain <sourabhjain@linux.ibm.com>
Date: Fri Jan 31 17:08:24 2025 +0530
kexec: initialize ELF lowest address to ULONG_MAX
[ Upstream commit 9986fb5164c8b21f6439cfd45ba36d8cc80c9710 ]
Patch series "powerpc/crash: use generic crashkernel reservation", v3.
Commit 0ab97169aa05 ("crash_core: add generic function to do reservation")
added a generic function to reserve crashkernel memory. So let's use the
same function on powerpc and remove the architecture-specific code that
essentially does the same thing.
The generic crashkernel reservation also provides a way to split the
crashkernel reservation into high and low memory reservations, which can
be enabled for powerpc in the future.
Additionally move powerpc to use generic APIs to locate memory hole for
kexec segments while loading kdump kernel.
This patch (of 7):
kexec_elf_load() loads an ELF executable and sets the address of the
lowest PT_LOAD section to the address held by the lowest_load_addr
function argument.
To determine the lowest PT_LOAD address, a local variable lowest_addr
(type unsigned long) is initialized to UINT_MAX. After loading each
PT_LOAD, its address is compared to lowest_addr. If a loaded PT_LOAD
address is lower, lowest_addr is updated. However, setting lowest_addr to
UINT_MAX won't work when the kernel image is loaded above 4G, as the
returned lowest PT_LOAD address would be invalid. This is resolved by
initializing lowest_addr to ULONG_MAX instead.
This issue was discovered while implementing crashkernel high/low
reservation on the PowerPC architecture.
Link: https://lkml.kernel.org/r/20250131113830.925179-1-sourabhjain@linux.ibm.com
Link: https://lkml.kernel.org/r/20250131113830.925179-2-sourabhjain@linux.ibm.com
Fixes: a0458284f062 ("powerpc: Add support code for kexec_file_load()")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Fri Jan 17 16:34:51 2025 -0800
KVM: x86: Reject Hyper-V's SEND_IPI hypercalls if local APIC isn't in-kernel
commit a8de7f100bb5989d9c3627d3a223ee1c863f3b69 upstream.
Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and
only if the local API is emulated/virtualized by KVM, and explicitly reject
said hypercalls if the local APIC is emulated in userspace, i.e. don't rely
on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID.
Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if
Hyper-V enlightenments are exposed to the guest without an in-kernel local
APIC:
dump_stack+0xbe/0xfd
__kasan_report.cold+0x34/0x84
kasan_report+0x3a/0x50
__apic_accept_irq+0x3a/0x5c0
kvm_hv_send_ipi.isra.0+0x34e/0x820
kvm_hv_hypercall+0x8d9/0x9d0
kvm_emulate_hypercall+0x506/0x7e0
__vmx_handle_exit+0x283/0xb60
vmx_handle_exit+0x1d/0xd0
vcpu_enter_guest+0x16b0/0x24c0
vcpu_run+0xc0/0x550
kvm_arch_vcpu_ioctl_run+0x170/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscal1_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode
can't be modified after vCPUs are created, i.e. if one vCPU has an
in-kernel local APIC, then all vCPUs have an in-kernel local APIC.
Reported-by: Dongjie Zou <zoudongjie@huawei.com>
Fixes: 214ff83d4473 ("KVM: x86: hyperv: implement PV IPI send hypercalls")
Fixes: 2bc39970e932 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
[ Conflict due to 72167a9d7da2 ("KVM: x86: hyper-v: Stop shadowing
global 'current_vcpu' variable") not in the tree ]
Signed-off-by: Abdelkareem Abdelsaamad <kareemem@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tanya Agarwal <tanyaagarwal25699@gmail.com>
Date: Tue Jan 14 19:42:04 2025 +0530
lib: 842: Improve error handling in sw842_compress()
[ Upstream commit af324dc0e2b558678aec42260cce38be16cc77ca ]
The static code analysis tool "Coverity Scan" pointed the following
implementation details out for further development considerations:
CID 1309755: Unused value
In sw842_compress: A value assigned to a variable is never used. (CWE-563)
returned_value: Assigning value from add_repeat_template(p, repeat_count)
to ret here, but that stored value is overwritten before it can be used.
Conclusion:
Add error handling for the return value from an add_repeat_template()
call.
Fixes: 2da572c959dd ("lib: add software 842 compression/decompression")
Signed-off-by: Tanya Agarwal <tanyaagarwal25699@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Thu Apr 10 14:31:02 2025 +0200
Linux 5.10.236
Link: https://lore.kernel.org/r/20250408104820.353768086@linuxfoundation.org
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20250409115831.755826974@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Wed Feb 12 11:36:18 2025 +0100
lockdep: Don't disable interrupts on RT in disable_irq_nosync_lockdep.*()
[ Upstream commit 87886b32d669abc11c7be95ef44099215e4f5788 ]
disable_irq_nosync_lockdep() disables interrupts with lockdep enabled to
avoid false positive reports by lockdep that a certain lock has not been
acquired with disabled interrupts. The user of this macros expects that
a lock can be acquried without disabling interrupts because the IRQ line
triggering the interrupt is disabled.
This triggers a warning on PREEMPT_RT because after
disable_irq_nosync_lockdep.*() the following spinlock_t now is acquired
with disabled interrupts.
On PREEMPT_RT there is no difference between spin_lock() and
spin_lock_irq() so avoiding disabling interrupts in this case works for
the two remaining callers as of today.
Don't disable interrupts on PREEMPT_RT in disable_irq_nosync_lockdep.*().
Closes: https://lore.kernel.org/760e34f9-6034-40e0-82a5-ee9becd24438@roeck-us.net
Fixes: e8106b941ceab ("[PATCH] lockdep: core, add enable/disable_irq_irqsave/irqrestore() APIs")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250212103619.2560503-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Waiman Long <longman@redhat.com>
Date: Fri Mar 7 15:26:52 2025 -0800
locking/semaphore: Use wake_q to wake up processes outside lock critical section
[ Upstream commit 85b2b9c16d053364e2004883140538e73b333cdb ]
A circular lock dependency splat has been seen involving down_trylock():
======================================================
WARNING: possible circular locking dependency detected
6.12.0-41.el10.s390x+debug
------------------------------------------------------
dd/32479 is trying to acquire lock:
0015a20accd0d4f8 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x26/0x90
but task is already holding lock:
000000017e461698 (&zone->lock){-.-.}-{2:2}, at: rmqueue_bulk+0xac/0x8f0
the existing dependency chain (in reverse order) is:
-> #4 (&zone->lock){-.-.}-{2:2}:
-> #3 (hrtimer_bases.lock){-.-.}-{2:2}:
-> #2 (&rq->__lock){-.-.}-{2:2}:
-> #1 (&p->pi_lock){-.-.}-{2:2}:
-> #0 ((console_sem).lock){-.-.}-{2:2}:
The console_sem -> pi_lock dependency is due to calling try_to_wake_up()
while holding the console_sem raw_spinlock. This dependency can be broken
by using wake_q to do the wakeup instead of calling try_to_wake_up()
under the console_sem lock. This will also make the semaphore's
raw_spinlock become a terminal lock without taking any further locks
underneath it.
The hrtimer_bases.lock is a raw_spinlock while zone->lock is a
spinlock. The hrtimer_bases.lock -> zone->lock dependency happens via
the debug_objects_fill_pool() helper function in the debugobjects code.
-> #4 (&zone->lock){-.-.}-{2:2}:
__lock_acquire+0xe86/0x1cc0
lock_acquire.part.0+0x258/0x630
lock_acquire+0xb8/0xe0
_raw_spin_lock_irqsave+0xb4/0x120
rmqueue_bulk+0xac/0x8f0
__rmqueue_pcplist+0x580/0x830
rmqueue_pcplist+0xfc/0x470
rmqueue.isra.0+0xdec/0x11b0
get_page_from_freelist+0x2ee/0xeb0
__alloc_pages_noprof+0x2c2/0x520
alloc_pages_mpol_noprof+0x1fc/0x4d0
alloc_pages_noprof+0x8c/0xe0
allocate_slab+0x320/0x460
___slab_alloc+0xa58/0x12b0
__slab_alloc.isra.0+0x42/0x60
kmem_cache_alloc_noprof+0x304/0x350
fill_pool+0xf6/0x450
debug_object_activate+0xfe/0x360
enqueue_hrtimer+0x34/0x190
__run_hrtimer+0x3c8/0x4c0
__hrtimer_run_queues+0x1b2/0x260
hrtimer_interrupt+0x316/0x760
do_IRQ+0x9a/0xe0
do_irq_async+0xf6/0x160
Normally a raw_spinlock to spinlock dependency is not legitimate
and will be warned if CONFIG_PROVE_RAW_LOCK_NESTING is enabled,
but debug_objects_fill_pool() is an exception as it explicitly
allows this dependency for non-PREEMPT_RT kernel without causing
PROVE_RAW_LOCK_NESTING lockdep splat. As a result, this dependency is
legitimate and not a bug.
Anyway, semaphore is the only locking primitive left that is still
using try_to_wake_up() to do wakeup inside critical section, all the
other locking primitives had been migrated to use wake_q to do wakeup
outside of the critical section. It is also possible that there are
other circular locking dependencies involving printk/console_sem or
other existing/new semaphores lurking somewhere which may show up in
the future. Let just do the migration now to wake_q to avoid headache
like this.
Reported-by: yzbot+ed801a886dfdbfe7136d@syzkaller.appspotmail.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250307232717.1759087-3-boqun.feng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnd Bergmann <arnd@arndb.de>
Date: Tue Feb 25 17:44:23 2025 +0100
mdacon: rework dependency list
[ Upstream commit 5bbcc7645f4b244ffb5ac6563fbe9d3d42194447 ]
mdacon has roughly the same dependencies as vgacon but expresses them
as a negative list instead of a positive list, with the only practical
difference being PowerPC/CHRP, which uses vga16fb instead of vgacon.
The CONFIG_MDA_CONSOLE description advises to only turn it on when vgacon
is also used because MDA/Hercules-only systems should be using vgacon
instead, so just change the list to enforce that directly for simplicity.
The probing was broken from 2002 to 2008, this improves on the fix
that was added then: If vgacon is a loadable module, then mdacon
cannot be built-in now, and the list of systems that support vgacon
is carried over.
Fixes: 0b9cf3aa6b1e ("mdacon messing up default vc's - set default to vc13-16 again")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Sun Mar 24 17:00:44 2024 +0100
media: i2c: et8ek8: Don't strip remove function when driver is builtin
commit 545b215736c5c4b354e182d99c578a472ac9bfce upstream.
Using __exit for the remove function results in the remove callback
being discarded with CONFIG_VIDEO_ET8EK8=y. When such a device gets
unbound (e.g. using sysfs or hotplug), the driver is just removed
without the cleanup being performed. This results in resource leaks. Fix
it by compiling in the remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: drivers/media/i2c/et8ek8/et8ek8: section mismatch in reference: et8ek8_i2c_driver+0x10 (section: .data) -> et8ek8_remove (section: .exit.text)
Fixes: c5254e72b8ed ("[media] media: Driver for Toshiba et8ek8 5MP sensor")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luo Qiu <luoqiu@kylinsec.com.cn>
Date: Mon Mar 17 18:14:38 2025 +0800
memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove
commit 4676741a3464b300b486e70585c3c9b692be1632 upstream.
This fixes the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
Read of size 8 at addr ffff888136335380 by task kworker/6:0/140241
CPU: 6 UID: 0 PID: 140241 Comm: kworker/6:0 Kdump: loaded Tainted: G E 6.14.0-rc6+ #1
Tainted: [E]=UNSIGNED_MODULE
Hardware name: LENOVO 30FNA1V7CW/1057, BIOS S0EKT54A 07/01/2024
Workqueue: events rtsx_usb_ms_poll_card [rtsx_usb_ms]
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x70
print_address_description.constprop.0+0x27/0x320
? rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
print_report+0x3e/0x70
kasan_report+0xab/0xe0
? rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
? __pfx_rtsx_usb_ms_poll_card+0x10/0x10 [rtsx_usb_ms]
? __pfx___schedule+0x10/0x10
? kick_pool+0x3b/0x270
process_one_work+0x357/0x660
worker_thread+0x390/0x4c0
? __pfx_worker_thread+0x10/0x10
kthread+0x190/0x1d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 161446:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0x7b/0x90
__kmalloc_noprof+0x1a7/0x470
memstick_alloc_host+0x1f/0xe0 [memstick]
rtsx_usb_ms_drv_probe+0x47/0x320 [rtsx_usb_ms]
platform_probe+0x60/0xe0
call_driver_probe+0x35/0x120
really_probe+0x123/0x410
__driver_probe_device+0xc7/0x1e0
driver_probe_device+0x49/0xf0
__device_attach_driver+0xc6/0x160
bus_for_each_drv+0xe4/0x160
__device_attach+0x13a/0x2b0
bus_probe_device+0xbd/0xd0
device_add+0x4a5/0x760
platform_device_add+0x189/0x370
mfd_add_device+0x587/0x5e0
mfd_add_devices+0xb1/0x130
rtsx_usb_probe+0x28e/0x2e0 [rtsx_usb]
usb_probe_interface+0x15c/0x460
call_driver_probe+0x35/0x120
really_probe+0x123/0x410
__driver_probe_device+0xc7/0x1e0
driver_probe_device+0x49/0xf0
__device_attach_driver+0xc6/0x160
bus_for_each_drv+0xe4/0x160
__device_attach+0x13a/0x2b0
rebind_marked_interfaces.isra.0+0xcc/0x110
usb_reset_device+0x352/0x410
usbdev_do_ioctl+0xe5c/0x1860
usbdev_ioctl+0xa/0x20
__x64_sys_ioctl+0xc5/0xf0
do_syscall_64+0x59/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 161506:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x36/0x60
__kasan_slab_free+0x34/0x50
kfree+0x1fd/0x3b0
device_release+0x56/0xf0
kobject_cleanup+0x73/0x1c0
rtsx_usb_ms_drv_remove+0x13d/0x220 [rtsx_usb_ms]
platform_remove+0x2f/0x50
device_release_driver_internal+0x24b/0x2e0
bus_remove_device+0x124/0x1d0
device_del+0x239/0x530
platform_device_del.part.0+0x19/0xe0
platform_device_unregister+0x1c/0x40
mfd_remove_devices_fn+0x167/0x170
device_for_each_child_reverse+0xc9/0x130
mfd_remove_devices+0x6e/0xa0
rtsx_usb_disconnect+0x2e/0xd0 [rtsx_usb]
usb_unbind_interface+0xf3/0x3f0
device_release_driver_internal+0x24b/0x2e0
proc_disconnect_claim+0x13d/0x220
usbdev_do_ioctl+0xb5e/0x1860
usbdev_ioctl+0xa/0x20
__x64_sys_ioctl+0xc5/0xf0
do_syscall_64+0x59/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Last potentially related work creation:
kasan_save_stack+0x20/0x40
kasan_record_aux_stack+0x85/0x90
insert_work+0x29/0x100
__queue_work+0x34a/0x540
call_timer_fn+0x2a/0x160
expire_timers+0x5f/0x1f0
__run_timer_base.part.0+0x1b6/0x1e0
run_timer_softirq+0x8b/0xe0
handle_softirqs+0xf9/0x360
__irq_exit_rcu+0x114/0x130
sysvec_apic_timer_interrupt+0x72/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
Second to last potentially related work creation:
kasan_save_stack+0x20/0x40
kasan_record_aux_stack+0x85/0x90
insert_work+0x29/0x100
__queue_work+0x34a/0x540
call_timer_fn+0x2a/0x160
expire_timers+0x5f/0x1f0
__run_timer_base.part.0+0x1b6/0x1e0
run_timer_softirq+0x8b/0xe0
handle_softirqs+0xf9/0x360
__irq_exit_rcu+0x114/0x130
sysvec_apic_timer_interrupt+0x72/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
The buggy address belongs to the object at ffff888136335000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 896 bytes inside of
freed 2048-byte region [ffff888136335000, ffff888136335800)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x136330
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: f5(slab)
raw: 0017ffffc0000040 ffff888100042f00 ffffea000417a000 dead000000000002
raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000
head: 0017ffffc0000040 ffff888100042f00 ffffea000417a000 dead000000000002
head: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000
head: 0017ffffc0000003 ffffea0004d8cc01 ffffffffffffffff 0000000000000000
head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888136335280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888136335300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888136335380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888136335400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888136335480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management")
Signed-off-by: Luo Qiu <luoqiu@kylinsec.com.cn>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/4B7BC3E6E291E6F2+20250317101438.25650-1-luoqiu@kylinsec.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Date: Wed Jan 15 09:12:06 2025 -0800
mfd: sm501: Switch to BIT() to mitigate integer overflows
[ Upstream commit 2d8cb9ffe18c2f1e5bd07a19cbce85b26c1d0cf0 ]
If offset end up being high enough, right hand expression in functions
like sm501_gpio_set() shifted left for that number of bits, may
not fit in int type.
Just in case, fix that by using BIT() both as an option safe from
overflow issues and to make this step look similar to other gpio
drivers.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: f61be273d369 ("sm501: add gpiolib support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20250115171206.20308-1-n.zhandarovich@fintech.ru
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gu Bowen <gubowen5@huawei.com>
Date: Tue Feb 25 10:28:56 2025 +0800
mmc: atmel-mci: Add missing clk_disable_unprepare()
commit e51a349d2dcf1df8422dabb90b2f691dc7df6f92 upstream.
The error path when atmci_configure_dma() set dma fails in atmci driver
does not correctly disable the clock.
Add the missing clk_disable_unprepare() to the error path for pair with
clk_prepare_enable().
Fixes: 467e081d23e6 ("mmc: atmel-mci: use probe deferring if dma controller is not ready yet")
Signed-off-by: Gu Bowen <gubowen5@huawei.com>
Acked-by: Aubin Constans <aubin.constans@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250225022856.3452240-1-gubowen5@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Karel Balej <balejk@matfyz.cz>
Date: Mon Mar 10 15:07:04 2025 +0100
mmc: sdhci-pxav3: set NEED_RSP_BUSY capability
commit a41fcca4b342811b473bbaa4b44f1d34d87fcce6 upstream.
Set the MMC_CAP_NEED_RSP_BUSY capability for the sdhci-pxav3 host to
prevent conversion of R1B responses to R1. Without this, the eMMC card
in the samsung,coreprimevelte smartphone using the Marvell PXA1908 SoC
with this mmc host doesn't probe with the ETIMEDOUT error originating in
__mmc_poll_for_busy.
Note that the other issues reported for this phone and host, namely
floods of "Tuning failed, falling back to fixed sampling clock" dmesg
messages for the eMMC and unstable SDIO are not mitigated by this
change.
Link: https://lore.kernel.org/r/20200310153340.5593-1-ulf.hansson@linaro.org/
Link: https://lore.kernel.org/r/D7204PWIGQGI.1FRFQPPIEE2P9@matfyz.cz/
Link: https://lore.kernel.org/r/20250115-pxa1908-lkml-v14-0-847d24f3665a@skole.hr/
Cc: stable@vger.kernel.org
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20250310140707.23459-1-balejk@matfyz.cz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Date: Mon Feb 24 19:11:52 2025 +0100
mptcp: safety check before fallback
[ Upstream commit db75a16813aabae3b78c06b1b99f5e314c1f55d3 ]
Recently, some fallback have been initiated, while the connection was
not supposed to fallback.
Add a safety check with a warning to detect when an wrong attempt to
fallback is being done. This should help detecting any future issues
quicker.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-3-f550f636b435@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wentao Liang <vulab@iscas.ac.cn>
Date: Fri Mar 7 10:18:20 2025 +0800
net/mlx5: handle errors in mlx5_chains_create_table()
[ Upstream commit eab0396353be1c778eba1c0b5180176f04dd21ce ]
In mlx5_chains_create_table(), the return value of mlx5_get_fdb_sub_ns()
and mlx5_get_flow_namespace() must be checked to prevent NULL pointer
dereferences. If either function fails, the function should log error
message with mlx5_core_warn() and return error pointer.
Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250307021820.2646-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Carolina Jubran <cjubran@nvidia.com>
Date: Tue Mar 11 00:01:44 2025 +0200
net/mlx5e: Prevent bridge link show failure for non-eswitch-allowed devices
[ Upstream commit e92df790d07a8eea873efcb84776e7b71f81c7d5 ]
mlx5_eswitch_get_vepa returns -EPERM if the device lacks
eswitch_manager capability, blocking mlx5e_bridge_getlink from
retrieving VEPA mode. Since mlx5e_bridge_getlink implements
ndo_bridge_getlink, returning -EPERM causes bridge link show to fail
instead of skipping devices without this capability.
To avoid this, return -EOPNOTSUPP from mlx5e_bridge_getlink when
mlx5_eswitch_get_vepa fails, ensuring the command continues processing
other devices while ignoring those without the necessary capability.
Fixes: 4b89251de024 ("net/mlx5: Support ndo bridge_setlink and getlink")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741644104-97767-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lin Ma <linma@zju.edu.cn>
Date: Sun Mar 16 00:51:13 2025 +0800
net/neighbor: add missing policy for NDTPA_QUEUE_LENBYTES
[ Upstream commit 90a7138619a0c55e2aefaad27b12ffc2ddbeed78 ]
Previous commit 8b5c171bb3dc ("neigh: new unresolved queue limits")
introduces new netlink attribute NDTPA_QUEUE_LENBYTES to represent
approximative value for deprecated QUEUE_LEN. However, it forgot to add
the associated nla_policy in nl_ntbl_parm_policy array. Fix it with one
simple NLA_U32 type policy.
Fixes: 8b5c171bb3dc ("neigh: new unresolved queue limits")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://patch.msgid.link/20250315165113.37600-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Fri Mar 14 13:10:57 2025 +0300
net: atm: fix use after free in lec_send()
[ Upstream commit f3009d0d6ab78053117f8857b921a8237f4d17b3 ]
The ->send() operation frees skb so save the length before calling
->send() to avoid a use after free.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c751531d-4af4-42fe-affe-6104b34b791d@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Date: Tue Apr 1 15:56:37 2025 +0200
net: dsa: mv88e6xxx: propperly shutdown PPU re-enable timer on destroy
[ Upstream commit a58d882841a0750da3c482cd3d82432b1c7edb77 ]
The mv88e6xxx has an internal PPU that polls PHY state. If we want to
access the internal PHYs, we need to disable the PPU first. Because
that is a slow operation, a 10ms timer is used to re-enable it,
canceled with every access, so bulk operations effectively only
disable it once and re-enable it some 10ms after the last access.
If a PHY is accessed and then the mv88e6xxx module is removed before
the 10ms are up, the PPU re-enable ends up accessing a dangling pointer.
This especially affects probing during bootup. The MDIO bus and PHY
registration may succeed, but registration with the DSA framework
may fail later on (e.g. because the CPU port depends on another,
very slow device that isn't done probing yet, returning -EPROBE_DEFER).
In this case, probe() fails, but the MDIO subsystem may already have
accessed the MIDO bus or PHYs, arming the timer.
This is fixed as follows:
- If probe fails after mv88e6xxx_phy_init(), make sure we also call
mv88e6xxx_phy_destroy() before returning
- In mv88e6xxx_remove(), make sure we do the teardown in the correct
order, calling mv88e6xxx_phy_destroy() after unregistering the
switch device.
- In mv88e6xxx_phy_destroy(), destroy both the timer and the work item
that the timer might schedule, synchronously waiting in case one of
the callbacks already fired and destroying the timer first, before
waiting for the work item.
- Access to the PPU is guarded by a mutex, the worker acquires it
with a mutex_trylock(), not proceeding with the expensive shutdown
if that fails. We grab the mutex in mv88e6xxx_phy_destroy() to make
sure the slow PPU shutdown is already done or won't even enter, when
we wait for the work item.
Fixes: 2e5f032095ff ("dsa: add support for the Marvell 88E6131 switch chip")
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250401135705.92760-1-david.oberhollenzer@sigma-star.at
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lin Ma <linma@zju.edu.cn>
Date: Thu Apr 3 00:56:32 2025 +0800
net: fix geneve_opt length integer overflow
[ Upstream commit b27055a08ad4b415dcf15b63034f9cb236f7fb40 ]
struct geneve_opt uses 5 bit length for each single option, which
means every vary size option should be smaller than 128 bytes.
However, all current related Netlink policies cannot promise this
length condition and the attacker can exploit a exact 128-byte size
option to *fake* a zero length option and confuse the parsing logic,
further achieve heap out-of-bounds read.
One example crash log is like below:
[ 3.905425] ==================================================================
[ 3.905925] BUG: KASAN: slab-out-of-bounds in nla_put+0xa9/0xe0
[ 3.906255] Read of size 124 at addr ffff888005f291cc by task poc/177
[ 3.906646]
[ 3.906775] CPU: 0 PID: 177 Comm: poc-oob-read Not tainted 6.1.132 #1
[ 3.907131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 3.907784] Call Trace:
[ 3.907925] <TASK>
[ 3.908048] dump_stack_lvl+0x44/0x5c
[ 3.908258] print_report+0x184/0x4be
[ 3.909151] kasan_report+0xc5/0x100
[ 3.909539] kasan_check_range+0xf3/0x1a0
[ 3.909794] memcpy+0x1f/0x60
[ 3.909968] nla_put+0xa9/0xe0
[ 3.910147] tunnel_key_dump+0x945/0xba0
[ 3.911536] tcf_action_dump_1+0x1c1/0x340
[ 3.912436] tcf_action_dump+0x101/0x180
[ 3.912689] tcf_exts_dump+0x164/0x1e0
[ 3.912905] fw_dump+0x18b/0x2d0
[ 3.913483] tcf_fill_node+0x2ee/0x460
[ 3.914778] tfilter_notify+0xf4/0x180
[ 3.915208] tc_new_tfilter+0xd51/0x10d0
[ 3.918615] rtnetlink_rcv_msg+0x4a2/0x560
[ 3.919118] netlink_rcv_skb+0xcd/0x200
[ 3.919787] netlink_unicast+0x395/0x530
[ 3.921032] netlink_sendmsg+0x3d0/0x6d0
[ 3.921987] __sock_sendmsg+0x99/0xa0
[ 3.922220] __sys_sendto+0x1b7/0x240
[ 3.922682] __x64_sys_sendto+0x72/0x90
[ 3.922906] do_syscall_64+0x5e/0x90
[ 3.923814] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 3.924122] RIP: 0033:0x7e83eab84407
[ 3.924331] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf
[ 3.925330] RSP: 002b:00007ffff505e370 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
[ 3.925752] RAX: ffffffffffffffda RBX: 00007e83eaafa740 RCX: 00007e83eab84407
[ 3.926173] RDX: 00000000000001a8 RSI: 00007ffff505e3c0 RDI: 0000000000000003
[ 3.926587] RBP: 00007ffff505f460 R08: 00007e83eace1000 R09: 000000000000000c
[ 3.926977] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffff505f3c0
[ 3.927367] R13: 00007ffff505f5c8 R14: 00007e83ead1b000 R15: 00005d4fbbe6dcb8
Fix these issues by enforing correct length condition in related
policies.
Fixes: 925d844696d9 ("netfilter: nft_tunnel: add support for geneve opts")
Fixes: 4ece47787077 ("lwtunnel: add options setting and dumping for geneve")
Fixes: 0ed5269f9e41 ("net/sched: add tunnel option support to act_tunnel_key")
Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250402165632.6958-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fabio Porcedda <fabio.porcedda@gmail.com>
Date: Thu Feb 27 12:24:39 2025 +0100
net: usb: qmi_wwan: add Telit Cinterion FE990B composition
commit e8cdd91926aac2c53a23925c538ad4c44be4201f upstream.
Add the following Telit Cinterion FE990B composition:
0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
usb-devices:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b0 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Link: https://patch.msgid.link/20250227112441.3653819-2-fabio.porcedda@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fabio Porcedda <fabio.porcedda@gmail.com>
Date: Wed Feb 5 18:16:46 2025 +0100
net: usb: qmi_wwan: add Telit Cinterion FN990B composition
commit 9dba9a45f8ca64a7df32aada14c20a3153af1ac8 upstream.
Add the following Telit Cinterion FN990B composition:
0x10d0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 17 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d0 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Link: https://patch.msgid.link/20250205171649.618162-3-fabio.porcedda@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dominique Martinet <dominique.martinet@atmark-techno.com>
Date: Wed Mar 26 17:32:36 2025 +0900
net: usb: usbnet: restore usb%d name exception for local mac addresses
commit 2ea396448f26d0d7d66224cb56500a6789c7ed07 upstream.
commit 8a7d12d674ac ("net: usb: usbnet: fix name regression") assumed
that local addresses always came from the kernel, but some devices hand
out local mac addresses so we ended up with point-to-point devices with
a mac set by the driver, renaming to eth%d when they used to be named
usb%d.
Userspace should not rely on device name, but for the sake of stability
restore the local mac address check portion of the naming exception:
point to point devices which either have no mac set by the driver or
have a local mac handed out by the driver will keep the usb%d name.
(some USB LTE modems are known to hand out a stable mac from the locally
administered range; that mac appears to be random (different for
mulitple devices) and can be reset with device-specific commands, so
while such devices would benefit from getting a OUI reserved, we have
to deal with these and might as well preserve the existing behavior
to avoid breaking fragile openwrt configurations and such on upgrade.)
Link: https://lkml.kernel.org/r/20241203130457.904325-1-asmadeus@codewreck.org
Fixes: 8a7d12d674ac ("net: usb: usbnet: fix name regression")
Cc: stable@vger.kernel.org
Tested-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250326-usbnet_rename-v2-1-57eb21fcff26@atmark-techno.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Cong Wang <xiyou.wangcong@gmail.com>
Date: Thu Mar 6 15:23:54 2025 -0800
net_sched: Prevent creation of classes with TC_H_ROOT
[ Upstream commit 0c3057a5a04d07120b3d0ec9c79568fceb9c921e ]
The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination
condition when traversing up the qdisc tree to update parent backlog
counters. However, if a class is created with classid TC_H_ROOT, the
traversal terminates prematurely at this class instead of reaching the
actual root qdisc, causing parent statistics to be incorrectly maintained.
In case of DRR, this could lead to a crash as reported by Mingi Cho.
Prevent the creation of any Qdisc class with classid TC_H_ROOT
(0xFFFFFFFF) across all qdisc types, as suggested by Jamal.
Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 066a3b5b2346 ("[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop")
Link: https://patch.msgid.link/20250306232355.93864-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cong Wang <xiyou.wangcong@gmail.com>
Date: Sat Mar 29 15:25:35 2025 -0700
net_sched: skbprio: Remove overly strict queue assertions
[ Upstream commit ce8fe975fd99b49c29c42e50f2441ba53112b2e8 ]
In the current implementation, skbprio enqueue/dequeue contains an assertion
that fails under certain conditions when SKBPRIO is used as a child qdisc under
TBF with specific parameters. The failure occurs because TBF sometimes peeks at
packets in the child qdisc without actually dequeuing them when tokens are
unavailable.
This peek operation creates a discrepancy between the parent and child qdisc
queue length counters. When TBF later receives a high-priority packet,
SKBPRIO's queue length may show a different value than what's reflected in its
internal priority queue tracking, triggering the assertion.
The fix removes this overly strict assertions in SKBPRIO, they are not
necessary at all.
Reported-by: syzbot+a3422a19b05ea96bee18@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a3422a19b05ea96bee18
Fixes: aea5f654e6b7 ("net/sched: add skbprio scheduler")
Cc: Nishanth Devarajan <ndev2021@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250329222536.696204-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Fri Jan 7 05:03:22 2022 +0100
netfilter: conntrack: convert to refcount_t api
[ Upstream commit 719774377622bc4025d2a74f551b5dc2158c6c30 ]
Convert nf_conn reference counting from atomic_t to refcount_t based api.
refcount_t api provides more runtime sanity checks and will warn on
certain constructs, e.g. refcount_inc() on a zero reference count, which
usually indicates use-after-free.
For this reason template allocation is changed to init the refcount to
1, the subsequenct add operations are removed.
Likewise, init_conntrack() is changed to set the initial refcount to 1
instead refcount_inc().
This is safe because the new entry is not (yet) visible to other cpus.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 5cfe5612ca95 ("netfilter: nft_ct: Use __refcount_inc() for per-CPU nft_ct_pcpu_template.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Wed Jul 6 16:50:04 2022 +0200
netfilter: conntrack: fix crash due to confirmed bit load reordering
commit 0ed8f619b412b52360ccdfaf997223ccd9319569 upstream.
Kajetan Puchalski reports crash on ARM, with backtrace of:
__nf_ct_delete_from_lists
nf_ct_delete
early_drop
__nf_conntrack_alloc
Unlike atomic_inc_not_zero, refcount_inc_not_zero is not a full barrier.
conntrack uses SLAB_TYPESAFE_BY_RCU, i.e. it is possible that a 'newly'
allocated object is still in use on another CPU:
CPU1 CPU2
encounter 'ct' during hlist walk
delete_from_lists
refcount drops to 0
kmem_cache_free(ct);
__nf_conntrack_alloc() // returns same object
refcount_inc_not_zero(ct); /* might fail */
/* If set, ct is public/in the hash table */
test_bit(IPS_CONFIRMED_BIT, &ct->status);
In case CPU1 already set refcount back to 1, refcount_inc_not_zero()
will succeed.
The expected possibilities for a CPU that obtained the object 'ct'
(but no reference so far) are:
1. refcount_inc_not_zero() fails. CPU2 ignores the object and moves to
the next entry in the list. This happens for objects that are about
to be free'd, that have been free'd, or that have been reallocated
by __nf_conntrack_alloc(), but where the refcount has not been
increased back to 1 yet.
2. refcount_inc_not_zero() succeeds. CPU2 checks the CONFIRMED bit
in ct->status. If set, the object is public/in the table.
If not, the object must be skipped; CPU2 calls nf_ct_put() to
un-do the refcount increment and moves to the next object.
Parallel deletion from the hlists is prevented by a
'test_and_set_bit(IPS_DYING_BIT, &ct->status);' check, i.e. only one
cpu will do the unlink, the other one will only drop its reference count.
Because refcount_inc_not_zero is not a full barrier, CPU2 may try to
delete an object that is not on any list:
1. refcount_inc_not_zero() successful (refcount inited to 1 on other CPU)
2. CONFIRMED test also successful (load was reordered or zeroing
of ct->status not yet visible)
3. delete_from_lists unlinks entry not on the hlist, because
IPS_DYING_BIT is 0 (already cleared).
2) is already wrong: CPU2 will handle a partially initited object
that is supposed to be private to CPU1.
Add needed barriers when refcount_inc_not_zero() is successful.
It also inserts a smp_wmb() before the refcount is set to 1 during
allocation.
Because other CPU might still see the object, refcount_set(1)
"resurrects" it, so we need to make sure that other CPUs will also observe
the right content. In particular, the CONFIRMED bit test must only pass
once the object is fully initialised and either in the hash or about to be
inserted (with locks held to delay possible unlink from early_drop or
gc worker).
I did not change flow_offload_alloc(), as far as I can see it should call
refcount_inc(), not refcount_inc_not_zero(): the ct object is attached to
the skb so its refcount should be >= 1 in all cases.
v2: prefer smp_acquire__after_ctrl_dep to smp_rmb (Will Deacon).
v3: keep smp_acquire__after_ctrl_dep close to refcount_inc_not_zero call
add comment in nf_conntrack_netlink, no control dependency there
due to locks.
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/all/Yr7WTfd6AVTQkLjI@e126311.manchester.arm.com/
Reported-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Diagnosed-by: Will Deacon <will@kernel.org>
Fixes: 719774377622 ("netfilter: conntrack: convert to refcount_t api")
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kohei Enju <enjuk@amazon.com>
Date: Sun Mar 9 17:07:38 2025 +0900
netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()
[ Upstream commit d653bfeb07ebb3499c403404c21ac58a16531607 ]
Since commit b36e4523d4d5 ("netfilter: nf_conncount: fix garbage
collection confirm race"), `cpu` and `jiffies32` were introduced to
the struct nf_conncount_tuple.
The commit made nf_conncount_add() initialize `conn->cpu` and
`conn->jiffies32` when allocating the struct.
In contrast, count_tree() was not changed to initialize them.
By commit 34848d5c896e ("netfilter: nf_conncount: Split insert and
traversal"), count_tree() was split and the relevant allocation
code now resides in insert_tree().
Initialize `conn->cpu` and `conn->jiffies32` in insert_tree().
BUG: KMSAN: uninit-value in find_or_evict net/netfilter/nf_conncount.c:117 [inline]
BUG: KMSAN: uninit-value in __nf_conncount_add+0xd9c/0x2850 net/netfilter/nf_conncount.c:143
find_or_evict net/netfilter/nf_conncount.c:117 [inline]
__nf_conncount_add+0xd9c/0x2850 net/netfilter/nf_conncount.c:143
count_tree net/netfilter/nf_conncount.c:438 [inline]
nf_conncount_count+0x82f/0x1e80 net/netfilter/nf_conncount.c:521
connlimit_mt+0x7f6/0xbd0 net/netfilter/xt_connlimit.c:72
__nft_match_eval net/netfilter/nft_compat.c:403 [inline]
nft_match_eval+0x1a5/0x300 net/netfilter/nft_compat.c:433
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x426/0x2290 net/netfilter/nf_tables_core.c:288
nft_do_chain_ipv4+0x1a5/0x230 net/netfilter/nft_chain_filter.c:23
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook_slow_list+0x24d/0x860 net/netfilter/core.c:663
NF_HOOK_LIST include/linux/netfilter.h:350 [inline]
ip_sublist_rcv+0x17b7/0x17f0 net/ipv4/ip_input.c:633
ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:669
__netif_receive_skb_list_ptype net/core/dev.c:5936 [inline]
__netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5983
__netif_receive_skb_list net/core/dev.c:6035 [inline]
netif_receive_skb_list_internal+0x1085/0x1700 net/core/dev.c:6126
netif_receive_skb_list+0x5a/0x460 net/core/dev.c:6178
xdp_recv_frames net/bpf/test_run.c:280 [inline]
xdp_test_run_batch net/bpf/test_run.c:361 [inline]
bpf_test_run_xdp_live+0x2e86/0x3480 net/bpf/test_run.c:390
bpf_prog_test_run_xdp+0xf1d/0x1ae0 net/bpf/test_run.c:1316
bpf_prog_test_run+0x5e5/0xa30 kernel/bpf/syscall.c:4407
__sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5813
__do_sys_bpf kernel/bpf/syscall.c:5902 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5900 [inline]
__ia32_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5900
ia32_sys_call+0x394d/0x4180 arch/x86/include/generated/asm/syscalls_32.h:358
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0xb0/0x110 arch/x86/entry/common.c:387
do_fast_syscall_32+0x38/0x80 arch/x86/entry/common.c:412
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:450
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4121 [inline]
slab_alloc_node mm/slub.c:4164 [inline]
kmem_cache_alloc_noprof+0x915/0xe10 mm/slub.c:4171
insert_tree net/netfilter/nf_conncount.c:372 [inline]
count_tree net/netfilter/nf_conncount.c:450 [inline]
nf_conncount_count+0x1415/0x1e80 net/netfilter/nf_conncount.c:521
connlimit_mt+0x7f6/0xbd0 net/netfilter/xt_connlimit.c:72
__nft_match_eval net/netfilter/nft_compat.c:403 [inline]
nft_match_eval+0x1a5/0x300 net/netfilter/nft_compat.c:433
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x426/0x2290 net/netfilter/nf_tables_core.c:288
nft_do_chain_ipv4+0x1a5/0x230 net/netfilter/nft_chain_filter.c:23
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook_slow_list+0x24d/0x860 net/netfilter/core.c:663
NF_HOOK_LIST include/linux/netfilter.h:350 [inline]
ip_sublist_rcv+0x17b7/0x17f0 net/ipv4/ip_input.c:633
ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:669
__netif_receive_skb_list_ptype net/core/dev.c:5936 [inline]
__netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5983
__netif_receive_skb_list net/core/dev.c:6035 [inline]
netif_receive_skb_list_internal+0x1085/0x1700 net/core/dev.c:6126
netif_receive_skb_list+0x5a/0x460 net/core/dev.c:6178
xdp_recv_frames net/bpf/test_run.c:280 [inline]
xdp_test_run_batch net/bpf/test_run.c:361 [inline]
bpf_test_run_xdp_live+0x2e86/0x3480 net/bpf/test_run.c:390
bpf_prog_test_run_xdp+0xf1d/0x1ae0 net/bpf/test_run.c:1316
bpf_prog_test_run+0x5e5/0xa30 kernel/bpf/syscall.c:4407
__sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5813
__do_sys_bpf kernel/bpf/syscall.c:5902 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5900 [inline]
__ia32_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5900
ia32_sys_call+0x394d/0x4180 arch/x86/include/generated/asm/syscalls_32.h:358
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0xb0/0x110 arch/x86/entry/common.c:387
do_fast_syscall_32+0x38/0x80 arch/x86/entry/common.c:412
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:450
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
Reported-by: syzbot+83fed965338b573115f7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=83fed965338b573115f7
Fixes: b36e4523d4d5 ("netfilter: nf_conncount: fix garbage collection confirm race")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Florian Westphal <fw@strlen.de>
Date: Sun Jan 23 15:24:00 2022 +0100
netfilter: nft_ct: fix use after free when attaching zone template
[ Upstream commit 34243b9ec856309339172b1507379074156947e8 ]
The conversion erroneously removed the refcount increment.
In case we can use the percpu template, we need to increment
the refcount, else it will be released when the skb gets freed.
In case the slowpath is taken, the new template already has a
refcount of 1.
Fixes: 719774377622 ("netfilter: conntrack: convert to refcount_t api")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 5cfe5612ca95 ("netfilter: nft_ct: Use __refcount_inc() for per-CPU nft_ct_pcpu_template.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Feb 17 17:02:42 2025 +0100
netfilter: nft_ct: Use __refcount_inc() for per-CPU nft_ct_pcpu_template.
[ Upstream commit 5cfe5612ca9590db69b9be29dc83041dbf001108 ]
nft_ct_pcpu_template is a per-CPU variable and relies on disabled BH for its
locking. The refcounter is read and if its value is set to one then the
refcounter is incremented and variable is used - otherwise it is already
in use and left untouched.
Without per-CPU locking in local_bh_disable() on PREEMPT_RT the
read-then-increment operation is not atomic and therefore racy.
This can be avoided by using unconditionally __refcount_inc() which will
increment counter and return the old value as an atomic operation.
In case the returned counter is not one, the variable is in use and we
need to decrement counter. Otherwise we can use it.
Use __refcount_inc() instead of read and a conditional increment.
Fixes: edee4f1e9245 ("netfilter: nft_ct: add zone id set support")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexey Kashavkin <akashavkin@gmail.com>
Date: Sun Mar 2 00:14:36 2025 +0300
netfilter: nft_exthdr: fix offset with ipv4_find_option()
[ Upstream commit 6edd78af9506bb182518da7f6feebd75655d9a0e ]
There is an incorrect calculation in the offset variable which causes
the nft_skb_copy_to_reg() function to always return -EFAULT. Adding the
start variable is redundant. In the __ip_options_compile() function the
correct offset is specified when finding the function. There is no need
to add the size of the iphdr structure to the offset.
Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options")
Signed-off-by: Alexey Kashavkin <akashavkin@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lin Ma <linma@zju.edu.cn>
Date: Thu Apr 3 01:00:26 2025 +0800
netfilter: nft_tunnel: fix geneve_opt type confusion addition
[ Upstream commit 1b755d8eb1ace3870789d48fbd94f386ad6e30be ]
When handling multiple NFTA_TUNNEL_KEY_OPTS_GENEVE attributes, the
parsing logic should place every geneve_opt structure one by one
compactly. Hence, when deciding the next geneve_opt position, the
pointer addition should be in units of char *.
However, the current implementation erroneously does type conversion
before the addition, which will lead to heap out-of-bounds write.
[ 6.989857] ==================================================================
[ 6.990293] BUG: KASAN: slab-out-of-bounds in nft_tunnel_obj_init+0x977/0xa70
[ 6.990725] Write of size 124 at addr ffff888005f18974 by task poc/178
[ 6.991162]
[ 6.991259] CPU: 0 PID: 178 Comm: poc-oob-write Not tainted 6.1.132 #1
[ 6.991655] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 6.992281] Call Trace:
[ 6.992423] <TASK>
[ 6.992586] dump_stack_lvl+0x44/0x5c
[ 6.992801] print_report+0x184/0x4be
[ 6.993790] kasan_report+0xc5/0x100
[ 6.994252] kasan_check_range+0xf3/0x1a0
[ 6.994486] memcpy+0x38/0x60
[ 6.994692] nft_tunnel_obj_init+0x977/0xa70
[ 6.995677] nft_obj_init+0x10c/0x1b0
[ 6.995891] nf_tables_newobj+0x585/0x950
[ 6.996922] nfnetlink_rcv_batch+0xdf9/0x1020
[ 6.998997] nfnetlink_rcv+0x1df/0x220
[ 6.999537] netlink_unicast+0x395/0x530
[ 7.000771] netlink_sendmsg+0x3d0/0x6d0
[ 7.001462] __sock_sendmsg+0x99/0xa0
[ 7.001707] ____sys_sendmsg+0x409/0x450
[ 7.002391] ___sys_sendmsg+0xfd/0x170
[ 7.003145] __sys_sendmsg+0xea/0x170
[ 7.004359] do_syscall_64+0x5e/0x90
[ 7.005817] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 7.006127] RIP: 0033:0x7ec756d4e407
[ 7.006339] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf
[ 7.007364] RSP: 002b:00007ffed5d46760 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 7.007827] RAX: ffffffffffffffda RBX: 00007ec756cc4740 RCX: 00007ec756d4e407
[ 7.008223] RDX: 0000000000000000 RSI: 00007ffed5d467f0 RDI: 0000000000000003
[ 7.008620] RBP: 00007ffed5d468a0 R08: 0000000000000000 R09: 0000000000000000
[ 7.009039] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 7.009429] R13: 00007ffed5d478b0 R14: 00007ec756ee5000 R15: 00005cbd4e655cb8
Fix this bug with correct pointer addition and conversion in parse
and dump code.
Fixes: 925d844696d9 ("netfilter: nft_tunnel: add support for geneve opts")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maxim Mikityanskiy <maxtram95@gmail.com>
Date: Tue Mar 18 18:15:16 2025 +0200
netfilter: socket: Lookup orig tuple for IPv6 SNAT
commit 932b32ffd7604fb00b5c57e239a3cc4d901ccf6e upstream.
nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to
restore the original 5-tuple in case of SNAT, to be able to find the
right socket (if any). Then socket_match() can correctly check whether
the socket was transparent.
However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this
conntrack lookup, making xt_socket fail to match on the socket when the
packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6.
IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as
pods' addresses are in the fd00::/8 ULA subnet and need to be replaced
with the node's external address. Cilium leverages Envoy to enforce L7
policies, and Envoy uses transparent sockets. Cilium inserts an iptables
prerouting rule that matches on `-m socket --transparent` and redirects
the packets to localhost, but it fails to match SNATed IPv6 packets due
to that missing conntrack lookup.
Closes: https://github.com/cilium/cilium/issues/37932
Fixes: eb31628e37a0 ("netfilter: nf_tables: Add support for IPv6 NAT")
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Debin Zhu <mowenroot@163.com>
Date: Tue Apr 1 20:40:18 2025 +0800
netlabel: Fix NULL pointer exception caused by CALIPSO on IPv4 sockets
[ Upstream commit 078aabd567de3d63d37d7673f714e309d369e6e2 ]
When calling netlbl_conn_setattr(), addr->sa_family is used
to determine the function behavior. If sk is an IPv4 socket,
but the connect function is called with an IPv6 address,
the function calipso_sock_setattr() is triggered.
Inside this function, the following code is executed:
sk_fullsock(__sk) ? inet_sk(__sk)->pinet6 : NULL;
Since sk is an IPv4 socket, pinet6 is NULL, leading to a
null pointer dereference.
This patch fixes the issue by checking if inet6_sk(sk)
returns a NULL pointer before accessing pinet6.
Signed-off-by: Debin Zhu <mowenroot@163.com>
Signed-off-by: Bitao Ouyang <1985755126@qq.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.")
Link: https://patch.msgid.link/20250401124018.4763-1-mowenroot@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Breno Leitao <leitao@debian.org>
Date: Thu Mar 6 05:16:18 2025 -0800
netpoll: hold rcu read lock in __netpoll_send_skb()
[ Upstream commit 505ead7ab77f289f12d8a68ac83da068e4d4408b ]
The function __netpoll_send_skb() is being invoked without holding the
RCU read lock. This oversight triggers a warning message when
CONFIG_PROVE_RCU_LIST is enabled:
net/core/netpoll.c:330 suspicious rcu_dereference_check() usage!
netpoll_send_skb
netpoll_send_udp
write_ext_msg
console_flush_all
console_unlock
vprintk_emit
To prevent npinfo from disappearing unexpectedly, ensure that
__netpoll_send_skb() is protected with the RCU read lock.
Fixes: 2899656b494dcd1 ("netpoll: take rcu_read_lock_bh() in netpoll_send_skb_on_dev()")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306-netpoll_rcu_v2-v2-1-bc4f5c51742a@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Li Lingfeng <lilingfeng3@huawei.com>
Date: Thu Feb 13 22:42:20 2025 +0800
nfsd: put dl_stid if fail to queue dl_recall
commit 230ca758453c63bd38e4d9f4a21db698f7abada8 upstream.
Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we
increment the reference count of dl_stid.
We expect that after the corresponding work_struct is processed, the
reference count of dl_stid will be decremented through the callback
function nfsd4_cb_recall_release.
However, if the call to nfsd4_run_cb fails, the incremented reference
count of dl_stid will not be decremented correspondingly, leading to the
following nfs4_stid leak:
unreferenced object 0xffff88812067b578 (size 344):
comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s)
hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........
00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N..
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfsd4_process_open1+0x34/0x300
nfsd4_open+0x2d1/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
unreferenced object 0xffff8881499f4d28 (size 368):
comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I....
30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... .......
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfs4_alloc_stid+0x29/0x210
alloc_init_deleg+0x92/0x2e0
nfs4_set_delegation+0x284/0xc00
nfs4_open_delegation+0x216/0x3f0
nfsd4_process_open2+0x2b3/0xee0
nfsd4_open+0x770/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if
fail to queue dl_recall.
Cc: stable@vger.kernel.org
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chuck Lever <chuck.lever@oracle.com>
Date: Tue Jan 14 17:09:24 2025 -0500
NFSD: Skip sending CB_RECALL_ANY when the backchannel isn't up
commit 8a388c1fabeb6606e16467b23242416c0dbeffad upstream.
NFSD sends CB_RECALL_ANY to clients when the server is low on
memory or that client has a large number of delegations outstanding.
We've seen cases where NFSD attempts to send CB_RECALL_ANY requests
to disconnected clients, and gets confused. These calls never go
anywhere if a backchannel transport to the target client isn't
available. Before the server can send any backchannel operation, the
client has to connect first and then do a BIND_CONN_TO_SESSION.
This patch doesn't address the root cause of the confusion, but
there's no need to queue up these optional operations if they can't
go anywhere.
Fixes: 44df6f439a17 ("NFSD: add delegation reaper to react to low memory condition")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Trond Myklebust <trond.myklebust@hammerspace.com>
Date: Tue Feb 18 16:50:30 2025 -0500
NFSv4: Don't trigger uneccessary scans for return-on-close delegations
[ Upstream commit 47acca884f714f41d95dc654f802845544554784 ]
The amount of looping through the list of delegations is occasionally
leading to soft lockups. Avoid at least some loops by not requiring the
NFSv4 state manager to scan for delegations that are marked for
return-on-close. Instead, either mark them for immediate return (if
possible) or else leave it up to nfs4_inode_return_delegation_on_close()
to return them once the file is closed by the application.
Fixes: b757144fd77c ("NFSv4: Be less aggressive about returning delegations for open files")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikita Shubin <n.shubin@yadro.com>
Date: Thu Jun 6 11:15:19 2024 +0300
ntb: intel: Fix using link status DB's
[ Upstream commit 8144e9c8f30fb23bb736a5d24d5c9d46965563c4 ]
Make sure we are not using DB's which were remapped for link status.
Fixes: f6e51c354b60 ("ntb: intel: split out the gen3 code")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yajun Deng <yajun.deng@linux.dev>
Date: Wed Aug 16 16:33:05 2023 +0800
ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans
[ Upstream commit de203da734fae00e75be50220ba5391e7beecdf9 ]
There is a kernel API ntb_mw_clear_trans() would pass 0 to both addr and
size. This would make xlate_pos negative.
[ 23.734156] switchtec switchtec0: MW 0: part 0 addr 0x0000000000000000 size 0x0000000000000000
[ 23.734158] ================================================================================
[ 23.734172] UBSAN: shift-out-of-bounds in drivers/ntb/hw/mscc/ntb_hw_switchtec.c:293:7
[ 23.734418] shift exponent -1 is negative
Ensuring xlate_pos is a positive or zero before BIT.
Fixes: 1e2fd202f859 ("ntb_hw_switchtec: Check for alignment of the buffer in mw_set_trans()")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Markus Elfring <elfring@users.sourceforge.net>
Date: Mon Sep 23 10:38:11 2024 +0200
ntb_perf: Delete duplicate dmaengine_unmap_put() call in perf_copy_chunk()
commit 4279e72cab31dd3eb8c89591eb9d2affa90ab6aa upstream.
The function call “dmaengine_unmap_put(unmap)” was used in an if branch.
The same call was immediately triggered by a subsequent goto statement.
Thus avoid such a call repetition.
This issue was detected by using the Coccinelle software.
Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Daniel Wagner <wagi@kernel.org>
Date: Thu Jan 9 14:30:47 2025 +0100
nvme-fc: go straight to connecting state when initializing
[ Upstream commit d3d380eded7ee5fc2fc53b3b0e72365ded025c4a ]
The initial controller initialization mimiks the reconnect loop
behavior by switching from NEW to RESETTING and then to CONNECTING.
The transition from NEW to CONNECTING is a valid transition, so there is
no point entering the RESETTING state. TCP and RDMA also transition
directly to CONNECTING state.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Icenowy Zheng <uwu@icenowy.me>
Date: Thu Feb 13 01:04:43 2025 +0800
nvme-pci: clean up CMBMSC when registering CMB fails
[ Upstream commit 6a3572e10f740acd48e2713ef37e92186a3ce5e8 ]
CMB decoding should get disabled when the CMB block isn't successfully
registered to P2P DMA subsystem.
Clean up the CMBMSC register in this error handling codepath to disable
CMB decoding (and CMBLOC/CMBSZ registers).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Icenowy Zheng <uwu@icenowy.me>
Date: Thu Feb 13 01:04:44 2025 +0800
nvme-pci: skip CMB blocks incompatible with PCI P2P DMA
[ Upstream commit 56cf7ef0d490b28fad8f8629fc135c5ab7c9f54e ]
The PCI P2PDMA code will register the CMB block to the memory
hot-plugging subsystem, which have an alignment requirement. Memory
blocks that do not satisfy this alignment requirement (usually 2MB) will
lead to a WARNING from memory hotplugging.
Verify the CMB block's address and size against the alignment and only
try to send CMB blocks compatible with it to prevent this warning.
Tested on Intel DC D4502 SSD, which has a 512K CMB block that is too
small for memory hotplugging (thus PCI P2PDMA).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sagi Grimberg <sagi@grimberg.me>
Date: Thu Feb 20 13:18:30 2025 +0200
nvme-tcp: fix possible UAF in nvme_tcp_poll
[ Upstream commit 8c1624b63a7d24142a2bbc3a5ee7e95f004ea36e ]
nvme_tcp_poll() may race with the send path error handler because
it may complete the request while it is actively being polled for
completion, resulting in a UAF panic [1]:
We should make sure to stop polling when we see an error when
trying to read from the socket. Hence make sure to propagate the
error so that the block layer breaks the polling cycle.
[1]:
--
[35665.692310] nvme nvme2: failed to send request -13
[35665.702265] nvme nvme2: unsupported pdu type (3)
[35665.702272] BUG: kernel NULL pointer dereference, address: 0000000000000000
[35665.702542] nvme nvme2: queue 1 receive failed: -22
[35665.703209] #PF: supervisor write access in kernel mode
[35665.703213] #PF: error_code(0x0002) - not-present page
[35665.703214] PGD 8000003801cce067 P4D 8000003801cce067 PUD 37e6f79067 PMD 0
[35665.703220] Oops: 0002 [#1] SMP PTI
[35665.703658] nvme nvme2: starting error recovery
[35665.705809] Hardware name: Inspur aaabbb/YZMB-00882-104, BIOS 4.1.26 09/22/2022
[35665.705812] Workqueue: kblockd blk_mq_requeue_work
[35665.709172] RIP: 0010:_raw_spin_lock+0xc/0x30
[35665.715788] Call Trace:
[35665.716201] <TASK>
[35665.716613] ? show_trace_log_lvl+0x1c1/0x2d9
[35665.717049] ? show_trace_log_lvl+0x1c1/0x2d9
[35665.717457] ? blk_mq_request_bypass_insert+0x2c/0xb0
[35665.717950] ? __die_body.cold+0x8/0xd
[35665.718361] ? page_fault_oops+0xac/0x140
[35665.718749] ? blk_mq_start_request+0x30/0xf0
[35665.719144] ? nvme_tcp_queue_rq+0xc7/0x170 [nvme_tcp]
[35665.719547] ? exc_page_fault+0x62/0x130
[35665.719938] ? asm_exc_page_fault+0x22/0x30
[35665.720333] ? _raw_spin_lock+0xc/0x30
[35665.720723] blk_mq_request_bypass_insert+0x2c/0xb0
[35665.721101] blk_mq_requeue_work+0xa5/0x180
[35665.721451] process_one_work+0x1e8/0x390
[35665.721809] worker_thread+0x53/0x3d0
[35665.722159] ? process_one_work+0x390/0x390
[35665.722501] kthread+0x124/0x150
[35665.722849] ? set_kthread_struct+0x50/0x50
[35665.723182] ret_from_fork+0x1f/0x30
Reported-by: Zhang Guanghui <zhang.guanghui@cestc.cn>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Wagner <wagi@kernel.org>
Date: Fri Feb 14 09:02:03 2025 +0100
nvme: only allow entering LIVE from CONNECTING state
[ Upstream commit d2fe192348f93fe3a0cb1e33e4aba58e646397f4 ]
The fabric transports and also the PCI transport are not entering the
LIVE state from NEW or RESETTING. This makes the state machine more
restrictive and allows to catch not supported state transitions, e.g.
directly switching from RESETTING to LIVE.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ruozhu Li <david.li@jaguarmicro.com>
Date: Sun Feb 16 20:49:56 2025 +0800
nvmet-rdma: recheck queue state is LIVE in state lock in recv done
[ Upstream commit 3988ac1c67e6e84d2feb987d7b36d5791174b3da ]
The queue state checking in nvmet_rdma_recv_done is not in queue state
lock.Queue state can transfer to LIVE in cm establish handler between
state checking and state lock here, cause a silent drop of nvme connect
cmd.
Recheck queue state whether in LIVE state in state lock to prevent this
issue.
Signed-off-by: Ruozhu Li <david.li@jaguarmicro.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Josh Poimboeuf <jpoimboe@kernel.org>
Date: Mon Mar 24 14:56:06 2025 -0700
objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds()
[ Upstream commit e63d465f59011dede0a0f1d21718b59a64c3ff5c ]
If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result
is a divide-by-zero. Prevent that from happening.
Fixes the following warning with an UBSAN kernel:
drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx()
Fixes: 173a64cb3fcf ("[media] dib8000: enhancement")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/bd1d504d930ae3f073b1e071bcf62cae7708773c.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/r/202503210602.fvH5DO1i-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vasiliy Kovalev <kovalev@altlinux.org>
Date: Fri Feb 14 11:49:08 2025 +0300
ocfs2: validate l_tree_depth to avoid out-of-bounds access
[ Upstream commit a406aff8c05115119127c962cbbbbd202e1973ef ]
The l_tree_depth field is 16-bit (__le16), but the actual maximum depth is
limited to OCFS2_MAX_PATH_DEPTH.
Add a check to prevent out-of-bounds access if l_tree_depth has an invalid
value, which may occur when reading from a corrupted mounted disk [1].
Link: https://lkml.kernel.org/r/20250214084908.736528-1-kovalev@altlinux.org
Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Reported-by: syzbot+66c146268dc88f4341fd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=66c146268dc88f4341fd [1]
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Kurt Hackel <kurt.hackel@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Vasiliy Kovalev <kovalev@altlinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Geetha sowjanya <gakula@marvell.com>
Date: Thu Mar 27 14:44:41 2025 +0530
octeontx2-af: Fix mbox INTR handler when num VFs > 64
[ Upstream commit 0fdba88a211508984eb5df62008c29688692b134 ]
When number of RVU VFs > 64, the vfs value passed to "rvu_queue_work"
function is incorrect. Due to which mbox workqueue entries for
VFs 0 to 63 never gets added to workqueue.
Fixes: 9bdc47a6e328 ("octeontx2-af: Mbox communication support btw AF and it's VFs")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250327091441.1284-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Stodden <daniel.stodden@gmail.com>
Date: Sun Dec 22 19:39:08 2024 -0800
PCI/ASPM: Fix link state exit during switch upstream function removal
[ Upstream commit cbf937dcadfd571a434f8074d057b32cd14fbea5 ]
Before 456d8aa37d0f ("PCI/ASPM: Disable ASPM on MFD function removal to
avoid use-after-free"), we would free the ASPM link only after the last
function on the bus pertaining to the given link was removed.
That was too late. If function 0 is removed before sibling function,
link->downstream would point to free'd memory after.
After above change, we freed the ASPM parent link state upon any function
removal on the bus pertaining to a given link.
That is too early. If the link is to a PCIe switch with MFD on the upstream
port, then removing functions other than 0 first would free a link which
still remains parent_link to the remaining downstream ports.
The resulting GPFs are especially frequent during hot-unplug, because
pciehp removes devices on the link bus in reverse order.
On that switch, function 0 is the virtual P2P bridge to the internal bus.
Free exactly when function 0 is removed -- before the parent link is
obsolete, but after all subordinate links are gone.
Link: https://lore.kernel.org/r/e12898835f25234561c9d7de4435590d957b85d9.1734924854.git.dns@arista.com
Fixes: 456d8aa37d0f ("PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free")
Signed-off-by: Daniel Stodden <dns@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Feng Tang <feng.tang@linux.alibaba.com>
Date: Mon Mar 3 10:36:30 2025 +0800
PCI/portdrv: Only disable pciehp interrupts early when needed
[ Upstream commit 9d7db4db19827380e225914618c0c1bf435ed2f5 ]
Firmware developers reported that Linux issues two PCIe hotplug commands in
very short intervals on an ARM server, which doesn't comply with the PCIe
spec. According to PCIe r6.1, sec 6.7.3.2, if the Command Completed event
is supported, software must wait for a command to complete or wait at
least 1 second before sending a new command.
In the failure case, the first PCIe hotplug command is from
get_port_device_capability(), which sends a command to disable PCIe hotplug
interrupts without waiting for its completion, and the second command comes
from pcie_enable_notification() of pciehp driver, which enables hotplug
interrupts again.
Fix this by only disabling the hotplug interrupts when the pciehp driver is
not enabled.
Link: https://lore.kernel.org/r/20250303023630.78397-1-feng.tang@linux.alibaba.com
Fixes: 2bd50dd800b5 ("PCI: PCIe: Disable PCIe port services during port initialization")
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jim Quinlan <james.quinlan@broadcom.com>
Date: Fri Feb 14 12:39:30 2025 -0500
PCI: brcmstb: Use internal register to change link capability
[ Upstream commit 0c97321e11e0e9e18546f828492758f6aaecec59 ]
The driver has been mistakenly writing to a read-only (RO)
configuration space register (PCI_EXP_LNKCAP) to change the
PCIe link capability.
Although harmless in this case, the proper write destination
is an internal register that is reflected by PCI_EXP_LNKCAP.
Thus, fix the brcm_pcie_set_gen() function to correctly update
the link capability.
Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214173944.47506-3-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans Zhang <18255117159@163.com>
Date: Sat Feb 15 00:57:24 2025 +0800
PCI: cadence-ep: Fix the driver to send MSG TLP for INTx without data payload
[ Upstream commit 3ac47fbf4f6e8c3a7c3855fac68cc3246f90f850 ]
Per the Cadence's "PCIe Controller IP for AX14" user guide, Version
1.04, Section 9.1.7.1, "AXI Subordinate to PCIe Address Translation
Registers", Table 9.4, the bit 16 of the AXI Subordinate Address
(axi_s_awaddr) when set corresponds to MSG with data, and when not set,
to MSG without data.
However, the driver is currently doing the opposite and due to this,
the INTx is never received on the host.
So, fix the driver to reflect the documentation and also make INTx work.
Fixes: 37dddf14f1ae ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller")
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214165724.184599-1-18255117159@163.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Fri Mar 21 18:21:14 2025 +0200
PCI: pciehp: Don't enable HPIE when resuming in poll mode
[ Upstream commit 527664f738afb6f2c58022cd35e63801e5dc7aec ]
PCIe hotplug can operate in poll mode without interrupt handlers using a
polling kthread only. eb34da60edee ("PCI: pciehp: Disable hotplug
interrupt during suspend") failed to consider that and enables HPIE
(Hot-Plug Interrupt Enable) unconditionally when resuming the Port.
Only set HPIE if non-poll mode is in use. This makes
pcie_enable_interrupt() match how pcie_enable_notification() already
handles HPIE.
Link: https://lore.kernel.org/r/20250321162114.3939-1-ilpo.jarvinen@linux.intel.com
Fixes: eb34da60edee ("PCI: pciehp: Disable hotplug interrupt during suspend")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Fri Mar 7 11:46:34 2025 +0300
PCI: Remove stray put_device() in pci_register_host_bridge()
[ Upstream commit 6e8d06e5096c80cbf41313b4a204f43071ca42be ]
This put_device() was accidentally left over from when we changed the code
from using device_register() to calling device_add(). Delete it.
Link: https://lore.kernel.org/r/55b24870-89fb-4c91-b85d-744e35db53c2@stanley.mountain
Fixes: 9885440b16b8 ("PCI: Fix pci_host_bridge struct device release/free handling")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Date: Mon Feb 24 21:20:22 2025 +0530
PCI: xilinx-cpm: Fix IRQ domain leak in error path of probe
[ Upstream commit 57b0302240741e73fe51f88404b3866e0d2933ad ]
The IRQ domain allocated for the PCIe controller is not freed if
resource_list_first_type() returns NULL, leading to a resource leak.
This fix ensures properly cleaning up the allocated IRQ domain in
the error path.
Fixes: 49e427e6bdd1 ("Merge branch 'pci/host-probe-refactor'")
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
[kwilczynski: added missing Fixes: tag, refactored to use one of the goto labels]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250224155025.782179-2-thippeswamy.havalige@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Wed Mar 12 17:31:41 2025 -0300
perf python: Check if there is space to copy all the event
[ Upstream commit 89aaeaf84231157288035b366cb6300c1c6cac64 ]
The pyrf_event__new() method copies the event obtained from the perf
ring buffer to a structure that will then be turned into a python object
for further consumption, so it copies perf_event.header.size bytes to
its 'event' member:
$ pahole -C pyrf_event /tmp/build/perf-tools-next/python/perf.cpython-312-x86_64-linux-gnu.so
struct pyrf_event {
PyObject ob_base; /* 0 16 */
struct evsel * evsel; /* 16 8 */
struct perf_sample sample; /* 24 312 */
/* XXX last struct has 7 bytes of padding, 2 holes */
/* --- cacheline 5 boundary (320 bytes) was 16 bytes ago --- */
union perf_event event; /* 336 4168 */
/* size: 4504, cachelines: 71, members: 4 */
/* member types with holes: 1, total: 2 */
/* paddings: 1, sum paddings: 7 */
/* last cacheline: 24 bytes */
};
$
It was doing so without checking if the event just obtained has more
than that space, fix it.
This isn't a proper, final solution, as we need to support larger
events, but for the time being we at least bounds check and document it.
Fixes: 877108e42b1b9ba6 ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-7-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Wed Mar 12 17:31:39 2025 -0300
perf python: Decrement the refcount of just created event on failure
[ Upstream commit 3de5a2bf5b4847f7a59a184568f969f8fe05d57f ]
To avoid a leak if we have the python object but then something happens
and we need to return the operation, decrement the offset of the newly
created object.
Fixes: 377f698db12150a1 ("perf python: Add struct evsel into struct pyrf_event")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-5-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Wed Mar 12 17:31:40 2025 -0300
perf python: Don't keep a raw_data pointer to consumed ring buffer space
[ Upstream commit f3fed3ae34d606819d87a63d970cc3092a5be7ab ]
When processing tracepoints the perf python binding was parsing the
event before calling perf_mmap__consume(&md->core) in
pyrf_evlist__read_on_cpu().
But part of this event parsing was to set the perf_sample->raw_data
pointer to the payload of the event, which then could be overwritten by
other event before tracepoint fields were asked for via event.prev_comm
in a python program, for instance.
This also happened with other fields, but strings were were problems
were surfacing, as there is UTF-8 validation for the potentially garbled
data.
This ended up showing up as (with some added debugging messages):
( field 'prev_comm' ret=0x7f7c31f65110, raw_size=68 ) ( field 'prev_pid' ret=0x7f7c23b1bed0, raw_size=68 ) ( field 'prev_prio' ret=0x7f7c239c0030, raw_size=68 ) ( field 'prev_state' ret=0x7f7c239c0250, raw_size=68 ) time 14771421785867 prev_comm= prev_pid=1919907691 prev_prio=796026219 prev_state=0x303a32313175 ==>
( XXX '��' len=16, raw_size=68) ( field 'next_comm' ret=(nil), raw_size=68 ) Traceback (most recent call last):
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 51, in <module>
main()
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 46, in main
event.next_comm,
^^^^^^^^^^^^^^^
AttributeError: 'perf.sample_event' object has no attribute 'next_comm'
When event.next_comm was asked for, the PyUnicode_FromString() python
API would fail and that tracepoint field wouldn't be available, stopping
the tools/perf/python/tracepoint.py test tool.
But, since we already do a copy of the whole event in pyrf_event__new,
just use it and while at it remove what was done in in e8968e654191390a
("perf python: Fix pyrf_evlist__read_on_cpu event consuming") because we
don't really need to wait for parsing the sample before declaring the
event as consumed.
This copy is questionable as is now, as it limits the maximum event +
sample_type and tracepoint payload to sizeof(union perf_event), this all
has been "working" because 'struct perf_event_mmap2', the largest entry
in 'union perf_event' is:
$ pahole -C perf_event ~/bin/perf | grep mmap2
struct perf_record_mmap2 mmap2; /* 0 4168 */
$
Fixes: bae57e3825a3dded ("perf python: Add support to resolve tracepoint fields")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-6-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Wed Mar 12 17:31:36 2025 -0300
perf python: Fixup description of sample.id event member
[ Upstream commit 1376c195e8ad327bb9f2d32e0acc5ac39e7cb30a ]
Some old cut'n'paste error, its "ip", so the description should be
"event ip", not "event type".
Fixes: 877108e42b1b9ba6 ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-2-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Mon Mar 10 16:45:32 2025 -0300
perf units: Fix insufficient array space
[ Upstream commit cf67629f7f637fb988228abdb3aae46d0c1748fe ]
No need to specify the array size, let the compiler figure that out.
This addresses this compiler warning that was noticed while build
testing on fedora rawhide:
31 15.81 fedora:rawhide : FAIL gcc version 15.0.1 20250225 (Red Hat 15.0.1-0) (GCC)
util/units.c: In function 'unit_number__scnprintf':
util/units.c:67:24: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-initialization]
67 | char unit[4] = "BKMG";
| ^~~~~~
cc1: all warnings being treated as errors
Fixes: 9808143ba2e54818 ("perf tools: Add unit_number__scnprintf function")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250310194534.265487-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tao Chen <chen.dylane@linux.dev>
Date: Fri Mar 14 11:00:36 2025 +0800
perf/ring_buffer: Allow the EPOLLRDNORM flag for poll
[ Upstream commit c96fff391c095c11dc87dab35be72dee7d217cde ]
The poll man page says POLLRDNORM is equivalent to POLLIN. For poll(),
it seems that if user sets pollfd with POLLRDNORM in userspace, perf_poll
will not return until timeout even if perf_output_wakeup called,
whereas POLLIN returns.
Fixes: 76369139ceb9 ("perf: Split up buffer handling from core code")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314030036.2543180-1-chen.dylane@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Artur Weber <aweber.kernel@gmail.com>
Date: Fri Feb 7 21:02:41 2025 +0100
pinctrl: bcm281xx: Fix incorrect regmap max_registers value
[ Upstream commit 68283c1cb573143c0b7515e93206f3503616bc10 ]
The max_registers value does not take into consideration the stride;
currently, it's set to the number of the last pin, but this does not
accurately represent the final register.
Fix this by multiplying the current value by 4.
Fixes: 54b1aa5a5b16 ("ARM: pinctrl: Add Broadcom Capri pinctrl driver")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/20250207-bcm21664-pinctrl-v1-2-e7cfac9b2d3b@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Date: Wed Mar 5 16:37:53 2025 +0000
pinctrl: renesas: rza2: Fix missing of_node_put() call
[ Upstream commit abcdeb4e299a11ecb5a3ea0cce00e68e8f540375 ]
of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.
Call into of_node_put() to rectify that.
Fixes: b59d0e782706 ("pinctrl: Add RZ/A2 pin and gpio controller")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250305163753.34913-5-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Prathamesh Shete <pshete@nvidia.com>
Date: Thu Mar 6 10:35:42 2025 +0530
pinctrl: tegra: Set SFIO mode to Mux Register
[ Upstream commit 17013f0acb322e5052ff9b9d0fab0ab5a4bfd828 ]
Tegra devices have an 'sfsel' bit field that determines whether a pin
operates in SFIO (Special Function I/O) or GPIO mode. Currently,
tegra_pinctrl_gpio_disable_free() sets this bit when releasing a GPIO.
However, tegra_pinctrl_set_mux() can be called independently in certain
code paths where gpio_disable_free() is not invoked. In such cases, failing
to set the SFIO mode could lead to incorrect pin configurations, resulting
in functional issues for peripherals relying on SFIO.
This patch ensures that whenever set_mux() is called, the SFIO mode is
correctly set in the Mux Register if the 'sfsel' bit is present. This
prevents situations where the pin remains in GPIO mode despite being
configured for SFIO use.
Fixes: 971dac7123c7 ("pinctrl: add a driver for NVIDIA Tegra")
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://lore.kernel.org/20250306050542.16335-1-pshete@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Panchenko <dmitry@d-systems.ee>
Date: Thu Feb 20 17:39:31 2025 +0200
platform/x86: intel-hid: fix volume buttons on Microsoft Surface Go 4 tablet
[ Upstream commit 2738d06fb4f01145b24c542fb06de538ffc56430 ]
Volume buttons on Microsoft Surface Go 4 tablet didn't send any events.
Add Surface Go 4 DMI match to button_array_table to fix this.
Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250220154016.3620917-1-dmitry@d-systems.ee
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Thu Feb 27 11:53:50 2025 +0100
PM: sleep: Adjust check before setting power.must_resume
[ Upstream commit eeb87d17aceab7803a5a5bcb6cf2817b745157cf ]
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.
Fixes: 107d47b2b95e ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Thu Mar 13 17:00:00 2025 +0100
PM: sleep: Fix handling devices with direct_complete set on errors
[ Upstream commit 03f1444016b71feffa1dfb8a51f15ba592f94b13 ]
When dpm_suspend() fails, some devices with power.direct_complete set
may not have been handled by device_suspend() yet, so runtime PM has
not been disabled for them yet even though power.direct_complete is set.
Since device_resume() expects that runtime PM has been disabled for all
devices with power.direct_complete set, it will attempt to reenable
runtime PM for the devices that have not been processed by device_suspend()
which does not make sense. Had those devices had runtime PM disabled
before device_suspend() had run, device_resume() would have inadvertently
enable runtime PM for them, but this is not expected to happen because
it would require ->prepare() callbacks to return positive values for
devices with runtime PM disabled, which would be invalid.
In practice, this issue is most likely benign because pm_runtime_enable()
will not allow the "disable depth" counter to underflow, but it causes a
warning message to be printed for each affected device.
To allow device_resume() to distinguish the "direct complete" devices
that have been processed by device_suspend() from those which have not
been handled by it, make device_suspend() set power.is_suspended for
"direct complete" devices.
Next, move the power.is_suspended check in device_resume() before the
power.direct_complete check in it to make it skip the "direct complete"
devices that have not been handled by device_suspend().
This change is based on a preliminary patch from Saravana Kannan.
Fixes: aae4518b3124 ("PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily")
Link: https://lore.kernel.org/linux-pm/20241114220921.2529905-2-saravanak@google.com/
Reported-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://patch.msgid.link/12627587.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Artur Weber <aweber.kernel@gmail.com>
Date: Sun Mar 16 21:11:49 2025 +0100
power: supply: max77693: Fix wrong conversion of charge input threshold value
[ Upstream commit 30cc7b0d0e9341d419eb7da15fb5c22406dbe499 ]
The charge input threshold voltage register on the MAX77693 PMIC accepts
four values: 0x0 for 4.3v, 0x1 for 4.7v, 0x2 for 4.8v and 0x3 for 4.9v.
Due to an oversight, the driver calculated the values for 4.7v and above
starting from 0x0, rather than from 0x1 ([(4700000 - 4700000) / 100000]
gives 0).
Add 1 to the calculation to ensure that 4.7v is converted to a register
value of 0x1 and that the other two voltages are converted correctly as
well.
Fixes: 87c2d9067893 ("power: max77693: Add charger driver for Maxim 77693")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250316-max77693-charger-input-threshold-fix-v1-1-2b037d0ac722@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Date: Fri Jan 10 10:05:54 2025 +0900
powercap: call put_device() on an error path in powercap_register_control_type()
[ Upstream commit 93c66fbc280747ea700bd6199633d661e3c819b3 ]
powercap_register_control_type() calls device_register(), but does not
release the refcount of the device when it fails.
Call put_device() before returning an error to balance the refcount.
Since the kfree(control_type) will be done by powercap_release(), remove
the lines in powercap_register_control_type() before returning the error.
This bug was found by an experimental verifier that I am developing.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20250110010554.1583411-1-joe@pf.is.s.u-tokyo.ac.jp
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ye Bin <yebin10@huawei.com>
Date: Sat Mar 1 15:06:24 2025 +0300
proc: fix UAF in proc_get_inode()
commit 654b33ada4ab5e926cd9c570196fefa7bec7c1df upstream.
Fix race between rmmod and /proc/XXX's inode instantiation.
The bug is that pde->proc_ops don't belong to /proc, it belongs to a
module, therefore dereferencing it after /proc entry has been registered
is a bug unless use_pde/unuse_pde() pair has been used.
use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops
never changes so information necessary for inode instantiation can be
saved _before_ proc_register() in PDE itself and used later, avoiding
pde->proc_ops->... dereference.
rmmod lookup
sys_delete_module
proc_lookup_de
pde_get(de);
proc_get_inode(dir->i_sb, de);
mod->exit()
proc_remove
remove_proc_subtree
proc_entry_rundown(de);
free_module(mod);
if (S_ISREG(inode->i_mode))
if (de->proc_ops->proc_read_iter)
--> As module is already freed, will trigger UAF
BUG: unable to handle page fault for address: fffffbfff80a702b
PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:proc_get_inode+0x302/0x6e0
RSP: 0018:ffff88811c837998 EFLAGS: 00010a06
RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007
RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158
RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20
R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0
R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001
FS: 00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
proc_lookup_de+0x11f/0x2e0
__lookup_slow+0x188/0x350
walk_component+0x2ab/0x4f0
path_lookupat+0x120/0x660
filename_lookup+0x1ce/0x560
vfs_statx+0xac/0x150
__do_sys_newstat+0x96/0x110
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[adobriyan@gmail.com: don't do 2 atomic ops on the common path]
Link: https://lkml.kernel.org/r/3d25ded0-1739-447e-812b-e34da7990dcf@p183
Fixes: 778f3dd5a13c ("Fix procfs compat_ioctl regression")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Haoxiang Li <haoxiang_li2024@163.com>
Date: Fri Mar 7 17:49:52 2025 +0800
qlcnic: fix memory leak issues in qlcnic_sriov_common.c
commit d2b9d97e89c79c95f8b517e4fa43fd100f936acc upstream.
Add qlcnic_sriov_free_vlans() in qlcnic_sriov_alloc_vlans() if
any sriov_vlans fails to be allocated.
Add qlcnic_sriov_free_vlans() to free the memory allocated by
qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to
be allocated.
Fixes: 91b7282b613d ("qlcnic: Support VLAN id config.")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250307094952.14874-1-haoxiang_li2024@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kashyap Desai <kashyap.desai@broadcom.com>
Date: Mon Mar 3 08:59:37 2025 -0800
RDMA/bnxt_re: Add missing paranthesis in map_qp_id_to_tbl_indx
[ Upstream commit 67ee8d496511ad8e1cb88f72944847e7b3e4e47c ]
The modulo operation returns wrong result without the
paranthesis and that resulted in wrong QP table indexing.
Fixes: 84cf229f4001 ("RDMA/bnxt_re: Fix the qp table indexing")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1741021178-2569-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Date: Mon Mar 10 22:16:36 2025 -0700
RDMA/bnxt_re: Avoid clearing VLAN_ID mask in modify qp path
[ Upstream commit 81c0db302a674f8004ed805393d17fd76f552e83 ]
Driver is always clearing the mask that sets the VLAN ID/Service Level
in the adapter. Recent change for supporting multiple traffic class
exposed this issue.
Allow setting SL and VLAN_ID while QP is moved from INIT to RTR state.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Fixes: c64b16a37b6d ("RDMA/bnxt_re: Support different traffic class")
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1741670196-2919-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junxian Huang <huangjunxian6@hisilicon.com>
Date: Tue Mar 11 16:48:52 2025 +0800
RDMA/hns: Fix soft lockup during bt pages loop
[ Upstream commit 25655580136de59ec89f09089dd28008ea440fc9 ]
Driver runs a for-loop when allocating bt pages and mapping them with
buffer pages. When a large buffer (e.g. MR over 100GB) is being allocated,
it may require a considerable loop count. This will lead to soft lockup:
watchdog: BUG: soft lockup - CPU#27 stuck for 22s!
...
Call trace:
hem_list_alloc_mid_bt+0x124/0x394 [hns_roce_hw_v2]
hns_roce_hem_list_request+0xf8/0x160 [hns_roce_hw_v2]
hns_roce_mtr_create+0x2e4/0x360 [hns_roce_hw_v2]
alloc_mr_pbl+0xd4/0x17c [hns_roce_hw_v2]
hns_roce_reg_user_mr+0xf8/0x190 [hns_roce_hw_v2]
ib_uverbs_reg_mr+0x118/0x290
watchdog: BUG: soft lockup - CPU#35 stuck for 23s!
...
Call trace:
hns_roce_hem_list_find_mtt+0x7c/0xb0 [hns_roce_hw_v2]
mtr_map_bufs+0xc4/0x204 [hns_roce_hw_v2]
hns_roce_mtr_create+0x31c/0x3c4 [hns_roce_hw_v2]
alloc_mr_pbl+0xb0/0x160 [hns_roce_hw_v2]
hns_roce_reg_user_mr+0x108/0x1c0 [hns_roce_hw_v2]
ib_uverbs_reg_mr+0x120/0x2bc
Add a cond_resched() to fix soft lockup during these loops. In order not
to affect the allocation performance of normal-size buffer, set the loop
count of a 100GB MR as the threshold to call cond_resched().
Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junxian Huang <huangjunxian6@hisilicon.com>
Date: Tue Mar 11 16:48:57 2025 +0800
RDMA/hns: Fix wrong value of max_sge_rd
[ Upstream commit 6b5e41a8b51fce520bb09bd651a29ef495e990de ]
There is no difference between the sge of READ and non-READ
operations in hns RoCE. Set max_sge_rd to the same value as
max_send_sge.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chengchang Tang <tangchengchang@huawei.com>
Date: Thu Sep 22 20:33:10 2022 +0800
RDMA/hns: Remove redundant 'phy_addr' in hns_roce_hem_list_find_mtt()
[ Upstream commit 5f652387c5423a82453c5cb446a88834bf41a94b ]
This parameter has never been used. Remove it to simplify the function.
Link: https://lore.kernel.org/r/20220922123315.3732205-8-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 25655580136d ("RDMA/hns: Fix soft lockup during bt pages loop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patrisious Haddad <phaddad@nvidia.com>
Date: Thu Mar 13 16:29:53 2025 +0200
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
[ Upstream commit 5ed3b0cb3f827072e93b4c5b6e2b8106fd7cccbd ]
When cur_qp isn't NULL, in order to avoid fetching the QP from
the radix tree again we check if the next cqe QP is identical to
the one we already have.
The bug however is that we are checking if the QP is identical by
checking the QP number inside the CQE against the QP number inside the
mlx5_ib_qp, but that's wrong since the QP number from the CQE is from
FW so it should be matched against mlx5_core_qp which is our FW QP
number.
Otherwise we could use the wrong QP when handling a CQE which could
cause the kernel trace below.
This issue is mainly noticeable over QPs 0 & 1, since for now they are
the only QPs in our driver whereas the QP number inside mlx5_ib_qp
doesn't match the QP number inside mlx5_core_qp.
BUG: kernel NULL pointer dereference, address: 0000000000000012
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib]
Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 <0f> b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21
RSP: 0018:ffff88810511bd60 EFLAGS: 00010046
RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a
RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000
R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0
FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib]
__ib_process_cq+0x5a/0x150 [ib_core]
ib_cq_poll_work+0x31/0x90 [ib_core]
process_one_work+0x169/0x320
worker_thread+0x288/0x3a0
? work_busy+0xb0/0xb0
kthread+0xd7/0x1f0
? kthreads_online_cpu+0x130/0x130
? kthreads_online_cpu+0x130/0x130
ret_from_fork+0x2d/0x50
? kthreads_online_cpu+0x130/0x130
ret_from_fork_asm+0x11/0x20
</TASK>
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/4ada09d41f1e36db62c44a9b25c209ea5f054316.1741875692.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christian Eggers <ceggers@arri.de>
Date: Thu Mar 13 11:27:39 2025 +0100
regulator: check that dummy regulator has been probed before using it
commit 2c7a50bec4958f1d1c84d19cde518d0e96a676fd upstream.
Due to asynchronous driver probing there is a chance that the dummy
regulator hasn't already been probed when first accessing it.
Cc: stable@vger.kernel.org
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://patch.msgid.link/20250313103051.32430-3-ceggers@arri.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Luca Weiss <luca@lucaweiss.eu>
Date: Tue Jan 28 22:54:00 2025 +0100
remoteproc: qcom_q6v5_pas: Make single-PD handling more robust
[ Upstream commit e917b73234b02aa4966325e7380d2559bf127ba9 ]
Only go into the if condition for single-PD handling when there's
actually just one power domain specified there. Otherwise it'll be an
issue in the dts and we should fail in the regular code path.
This also mirrors the latest changes in the qcom_q6v5_mss driver.
Suggested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Fixes: 17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250128-pas-singlepd-v1-2-85d9ae4b0093@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Feng Yang <yangfeng@kylinos.cn>
Date: Sun Feb 23 15:01:06 2025 +0800
ring-buffer: Fix bytes_dropped calculation issue
[ Upstream commit c73f0b69648501978e8b3e8fa7eef7f4197d0481 ]
The calculation of bytes-dropped and bytes_dropped_nested is reversed.
Although it does not affect the final calculation of total_dropped,
it should still be modified.
Link: https://lore.kernel.org/20250223070106.6781-1-yangfeng59949@163.com
Fixes: 6c43e554a2a5 ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Zhang <markzhang@nvidia.com>
Date: Tue Mar 25 11:02:26 2025 +0200
rtnetlink: Allocate vfinfo size for VF GUIDs when supported
[ Upstream commit 23f00807619d15063d676218f36c5dfeda1eb420 ]
Commit 30aad41721e0 ("net/core: Add support for getting VF GUIDs")
added support for getting VF port and node GUIDs in netlink ifinfo
messages, but their size was not taken into consideration in the
function that allocates the netlink message, causing the following
warning when a netlink message is filled with many VF port and node
GUIDs:
# echo 64 > /sys/bus/pci/devices/0000\:08\:00.0/sriov_numvfs
# ip link show dev ib0
RTNETLINK answers: Message too long
Cannot send link get request: Message too long
Kernel warning:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1930 at net/core/rtnetlink.c:4151 rtnl_getlink+0x586/0x5a0
Modules linked in: xt_conntrack xt_MASQUERADE nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay mlx5_ib macsec mlx5_core tls rpcrdma rdma_ucm ib_uverbs ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm iw_cm ib_ipoib fuse ib_cm ib_core
CPU: 2 UID: 0 PID: 1930 Comm: ip Not tainted 6.14.0-rc2+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:rtnl_getlink+0x586/0x5a0
Code: cb 82 e8 3d af 0a 00 4d 85 ff 0f 84 08 ff ff ff 4c 89 ff 41 be ea ff ff ff e8 66 63 5b ff 49 c7 07 80 4f cb 82 e9 36 fc ff ff <0f> 0b e9 16 fe ff ff e8 de a0 56 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ffff888113557348 EFLAGS: 00010246
RAX: 00000000ffffffa6 RBX: ffff88817e87aa34 RCX: dffffc0000000000
RDX: 0000000000000003 RSI: 0000000000000000 RDI: ffff88817e87afb8
RBP: 0000000000000009 R08: ffffffff821f44aa R09: 0000000000000000
R10: ffff8881260f79a8 R11: ffff88817e87af00 R12: ffff88817e87aa00
R13: ffffffff8563d300 R14: 00000000ffffffa6 R15: 00000000ffffffff
FS: 00007f63a5dbf280(0000) GS:ffff88881ee00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63a5ba4493 CR3: 00000001700fe002 CR4: 0000000000772eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0xa5/0x230
? rtnl_getlink+0x586/0x5a0
? report_bug+0x22d/0x240
? handle_bug+0x53/0xa0
? exc_invalid_op+0x14/0x50
? asm_exc_invalid_op+0x16/0x20
? skb_trim+0x6a/0x80
? rtnl_getlink+0x586/0x5a0
? __pfx_rtnl_getlink+0x10/0x10
? rtnetlink_rcv_msg+0x1e5/0x860
? __pfx___mutex_lock+0x10/0x10
? rcu_is_watching+0x34/0x60
? __pfx_lock_acquire+0x10/0x10
? stack_trace_save+0x90/0xd0
? filter_irq_stacks+0x1d/0x70
? kasan_save_stack+0x30/0x40
? kasan_save_stack+0x20/0x40
? kasan_save_track+0x10/0x30
rtnetlink_rcv_msg+0x21c/0x860
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? __pfx_rtnetlink_rcv_msg+0x10/0x10
? arch_stack_walk+0x9e/0xf0
? rcu_is_watching+0x34/0x60
? lock_acquire+0xd5/0x410
? rcu_is_watching+0x34/0x60
netlink_rcv_skb+0xe0/0x210
? __pfx_rtnetlink_rcv_msg+0x10/0x10
? __pfx_netlink_rcv_skb+0x10/0x10
? rcu_is_watching+0x34/0x60
? __pfx___netlink_lookup+0x10/0x10
? lock_release+0x62/0x200
? netlink_deliver_tap+0xfd/0x290
? rcu_is_watching+0x34/0x60
? lock_release+0x62/0x200
? netlink_deliver_tap+0x95/0x290
netlink_unicast+0x31f/0x480
? __pfx_netlink_unicast+0x10/0x10
? rcu_is_watching+0x34/0x60
? lock_acquire+0xd5/0x410
netlink_sendmsg+0x369/0x660
? lock_release+0x62/0x200
? __pfx_netlink_sendmsg+0x10/0x10
? import_ubuf+0xb9/0xf0
? __import_iovec+0x254/0x2b0
? lock_release+0x62/0x200
? __pfx_netlink_sendmsg+0x10/0x10
____sys_sendmsg+0x559/0x5a0
? __pfx_____sys_sendmsg+0x10/0x10
? __pfx_copy_msghdr_from_user+0x10/0x10
? rcu_is_watching+0x34/0x60
? do_read_fault+0x213/0x4a0
? rcu_is_watching+0x34/0x60
___sys_sendmsg+0xe4/0x150
? __pfx____sys_sendmsg+0x10/0x10
? do_fault+0x2cc/0x6f0
? handle_pte_fault+0x2e3/0x3d0
? __pfx_handle_pte_fault+0x10/0x10
? preempt_count_sub+0x14/0xc0
? __down_read_trylock+0x150/0x270
? __handle_mm_fault+0x404/0x8e0
? __pfx___handle_mm_fault+0x10/0x10
? lock_release+0x62/0x200
? __rcu_read_unlock+0x65/0x90
? rcu_is_watching+0x34/0x60
__sys_sendmsg+0xd5/0x150
? __pfx___sys_sendmsg+0x10/0x10
? __up_read+0x192/0x480
? lock_release+0x62/0x200
? __rcu_read_unlock+0x65/0x90
? rcu_is_watching+0x34/0x60
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f63a5b13367
Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007fff8c726bc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000067b687c2 RCX: 00007f63a5b13367
RDX: 0000000000000000 RSI: 00007fff8c726c30 RDI: 0000000000000004
RBP: 00007fff8c726cb8 R08: 0000000000000000 R09: 0000000000000034
R10: 00007fff8c726c7c R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000000000 R14: 00007fff8c726cd0 R15: 00007fff8c726cd0
</TASK>
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffffff813f9e58>] copy_process+0xd08/0x2830
softirqs last enabled at (0): [<ffffffff813f9e58>] copy_process+0xd08/0x2830
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace 0000000000000000 ]---
Thus, when calculating ifinfo message size, take VF GUIDs sizes into
account when supported.
Fixes: 30aad41721e0 ("net/core: Add support for getting VF GUIDs")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250325090226.749730-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Oberparleiter <oberpar@linux.ibm.com>
Date: Fri Jan 31 12:02:55 2025 +0100
s390/cio: Fix CHPID "configure" attribute caching
[ Upstream commit 32ae4a2992529e2c7934e422035fad1d9b0f1fb5 ]
In some environments, the SCLP firmware interface used to query a
CHPID's configured state is not supported. On these environments,
rapidly reading the corresponding sysfs attribute produces inconsistent
results:
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
$ cat /sys/devices/css0/chp0.00/configure
3
This occurs for example when Linux is run as a KVM guest. The
inconsistency is a result of CIO using cached results for generating
the value of the "configure" attribute while failing to handle the
situation where no data was returned by SCLP.
Fix this by not updating the cache-expiration timestamp when SCLP
returns no data. With the fix applied, the system response is
consistent:
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shrikanth Hegde <sshegde@linux.ibm.com>
Date: Thu Mar 6 10:59:53 2025 +0530
sched/deadline: Use online cpus for validating runtime
[ Upstream commit 14672f059d83f591afb2ee1fff56858efe055e5a ]
The ftrace selftest reported a failure because writing -1 to
sched_rt_runtime_us returns -EBUSY. This happens when the possible
CPUs are different from active CPUs.
Active CPUs are part of one root domain, while remaining CPUs are part
of def_root_domain. Since active cpumask is being used, this results in
cpus=0 when a non active CPUs is used in the loop.
Fix it by looping over the online CPUs instead for validating the
bandwidth calculations.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-2-sshegde@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Oleg Nesterov <oleg@redhat.com>
Date: Thu Apr 11 16:39:05 2024 +0200
sched/isolation: Prevent boot crash when the boot CPU is nohz_full
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:
08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full").
However after:
aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.
Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.
This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.
There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).
[ Apply only documentation changes as commit which causes boot
crash when boot CPU is nohz_full is not backported to stable
kernels - Krishanth ]
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
Signed-off-by: Krishanth Jagaduri <Krishanth.Jagaduri@sony.com>
[ strip out upstream commit and Fixes: so tools don't get confused that
this commit actually does anything real - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Josh Poimboeuf <jpoimboe@kernel.org>
Date: Mon Mar 31 21:26:44 2025 -0700
sched/smt: Always inline sched_smt_active()
[ Upstream commit 09f37f2d7b21ff35b8b533f9ab8cfad2fe8f72f6 ]
sched_smt_active() can be called from noinstr code, so it should always
be inlined. The CONFIG_SCHED_SMT version already has __always_inline.
Do the same for its !CONFIG_SCHED_SMT counterpart.
Fixes the following warning:
vmlinux.o: error: objtool: intel_idle_ibrs+0x13: call to sched_smt_active() leaves .noinstr.text section
Fixes: 321a874a7ef8 ("sched/smt: Expose sched_smt_present static key")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/1d03907b0a247cf7fb5c1d518de378864f603060.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/r/202503311434.lyw2Tveh-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Magnus Lindholm <linmag7@gmail.com>
Date: Sat Jan 25 10:49:22 2025 +0100
scsi: qla1280: Fix kernel oops when debug level > 2
[ Upstream commit 5233e3235dec3065ccc632729675575dbe3c6b8a ]
A null dereference or oops exception will eventually occur when qla1280.c
driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I
think its clear from the code that the intention here is sg_dma_len(s) not
length of sg_next(s) when printing the debug info.
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20250125095033.26188-1-linmag7@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu-Chun Lin <eleanor15x@gmail.com>
Date: Tue Feb 18 16:12:16 2025 +0800
sctp: Fix undefined behavior in left shift operation
[ Upstream commit 606572eb22c1786a3957d24307f5760bb058ca19 ]
According to the C11 standard (ISO/IEC 9899:2011, 6.5.7):
"If E1 has a signed type and E1 x 2^E2 is not representable in the result
type, the behavior is undefined."
Shifting 1 << 31 causes signed integer overflow, which leads to undefined
behavior.
Fix this by explicitly using '1U << 31' to ensure the shift operates on
an unsigned type, avoiding undefined behavior.
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://patch.msgid.link/20250218081217.3468369-1-eleanor15x@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tim Schumacher <tim.schumacher1@huawei.com>
Date: Fri Mar 7 10:56:43 2025 +0100
selinux: Chain up tool resolving errors in install_policy.sh
[ Upstream commit 6ae0042f4d3f331e841495eb0a3d51598e593ec2 ]
Subshell evaluations are not exempt from errexit, so if a command is
not available, `which` will fail and exit the script as a whole.
This causes the helpful error messages to not be printed if they are
tacked on using a `$?` comparison.
Resolve the issue by using chains of logical operators, which are not
subject to the effects of errexit.
Fixes: e37c1877ba5b1 ("scripts/selinux: modernize mdp")
Signed-off-by: Tim Schumacher <tim.schumacher1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: John Keeping <jkeeping@inmusicbrands.com>
Date: Mon Feb 24 12:18:30 2025 +0000
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
commit a26503092c75abba70a0be2aa01145ecf90c2a22 upstream.
When flushing transmit side DMA, it is the transmit channel that should
be terminated, not the receive channel.
Fixes: 9e512eaaf8f40 ("serial: 8250: Fix fifo underflow on flush")
Cc: stable <stable@kernel.org>
Reported-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250224121831.1429323-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Saranya R <quic_sarar@quicinc.com>
Date: Wed Feb 12 22:07:20 2025 +0530
soc: qcom: pdr: Fix the potential deadlock
commit 2eeb03ad9f42dfece63051be2400af487ddb96d2 upstream.
When some client process A call pdr_add_lookup() to add the look up for
the service and does schedule locator work, later a process B got a new
server packet indicating locator is up and call pdr_locator_new_server()
which eventually sets pdr->locator_init_complete to true which process A
sees and takes list lock and queries domain list but it will timeout due
to deadlock as the response will queued to the same qmi->wq and it is
ordered workqueue and process B is not able to complete new server
request work due to deadlock on list lock.
Fix it by removing the unnecessary list iteration as the list iteration
is already being done inside locator work, so avoid it here and just
call schedule_work() here.
Process A Process B
process_scheduled_works()
pdr_add_lookup() qmi_data_ready_work()
process_scheduled_works() pdr_locator_new_server()
pdr->locator_init_complete=true;
pdr_locator_work()
mutex_lock(&pdr->list_lock);
pdr_locate_service() mutex_lock(&pdr->list_lock);
pdr_get_domain_list()
pr_err("PDR: %s get domain list
txn wait failed: %d\n",
req->service_name,
ret);
Timeout error log due to deadlock:
"
PDR: tms/servreg get domain list txn wait failed: -110
PDR: service lookup for msm/adsp/sensor_pd:tms/servreg failed: -110
"
Thanks to Bjorn and Johan for letting me know that this commit also fixes
an audio regression when using the in-kernel pd-mapper as that makes it
easier to hit this race. [1]
Link: https://lore.kernel.org/lkml/Zqet8iInnDhnxkT9@hovoldconsulting.com/ # [1]
Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers")
CC: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
Co-developed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250212163720.1577876-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Mar 12 19:38:28 2025 -0400
spufs: fix a leak in spufs_create_context()
[ Upstream commit 0f5cce3fc55b08ee4da3372baccf4bcd36a98396 ]
Leak fixes back in 2008 missed one case - if we are trying to set affinity
and spufs_mkdir() fails, we need to drop the reference to neighbor.
Fixes: 58119068cb27 "[POWERPC] spufs: Fix memory leak on SPU affinity"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Mar 8 19:26:31 2025 -0500
spufs: fix a leak on spufs_new_file() failure
[ Upstream commit d1ca8698ca1332625d83ea0d753747be66f9906d ]
It's called from spufs_fill_dir(), and caller of that will do
spufs_rmdir() in case of failure. That does remove everything
we'd managed to create, but... the problem dentry is still
negative. IOW, it needs to be explicitly dropped.
Fixes: 3f51dd91c807 "[PATCH] spufs: fix spufs_fill_dir error path"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Tue Feb 11 09:47:11 2025 +0100
thermal/cpufreq_cooling: Remove structure member documentation
[ Upstream commit a6768c4f92e152265590371975d44c071a5279c7 ]
The structure member documentation refers to a member which does not
exist any more. Remove it.
Link: https://lore.kernel.org/all/202501220046.h3PMBCti-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501220046.h3PMBCti-lkp@intel.com/
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250211084712.2746705-1-daniel.lezcano@linaro.org
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chenyuan Yang <chenyuan0y@gmail.com>
Date: Wed Mar 12 23:36:11 2025 -0500
thermal: int340x: Add NULL check for adev
[ Upstream commit 2542a3f70e563a9e70e7ded314286535a3321bdb ]
Not all devices have an ACPI companion fwnode, so adev might be NULL.
This is similar to the commit cd2fd6eab480
("platform/x86: int3472: Check for adev == NULL").
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in int3402_thermal_probe().
Note, under the same directory, int3400_thermal_probe() has such a
check.
Fixes: 77e337c6e23e ("Thermal: introduce INT3402 thermal driver")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250313043611.1212116-1-chenyuan0y@gmail.com
[ rjw: Subject edit, added Fixes: ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Steven Rostedt <rostedt@goodmis.org>
Date: Sun Mar 23 15:21:51 2025 -0400
tracing: Do not use PERF enums when perf is not defined
commit 8eb1518642738c6892bd629b46043513a3bf1a6a upstream.
An update was made to up the module ref count when a synthetic event is
registered for both trace and perf events. But if perf is not configured
in, the perf enums used will cause the kernel to fail to build.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Link: https://lore.kernel.org/20250323152151.528b5ced@batman.local.home
Fixes: 21581dd4e7ff ("tracing: Ensure module defining synth event cannot be unloaded while tracing")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503232230.TeREVy8R-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Douglas Raillard <douglas.raillard@arm.com>
Date: Tue Mar 18 18:09:05 2025 +0000
tracing: Ensure module defining synth event cannot be unloaded while tracing
commit 21581dd4e7ff6c07d0ab577e3c32b13a74b31522 upstream.
Currently, using synth_event_delete() will fail if the event is being
used (tracing in progress), but that is normally done in the module exit
function. At that stage, failing is problematic as returning a non-zero
status means the module will become locked (impossible to unload or
reload again).
Instead, ensure the module exit function does not get called in the
first place by increasing the module refcnt when the event is enabled.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 35ca5207c2d11 ("tracing: Add synthetic event command generation functions")
Link: https://lore.kernel.org/20250318180906.226841-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tengda Wu <wutengda@huaweicloud.com>
Date: Thu Mar 20 12:21:37 2025 +0000
tracing: Fix use-after-free in print_graph_function_flags during tracer switching
commit 7f81f27b1093e4895e87b74143c59c055c3b1906 upstream.
Kairui reported a UAF issue in print_graph_function_flags() during
ftrace stress testing [1]. This issue can be reproduced if puting a
'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(),
and executing the following script:
$ echo function_graph > current_tracer
$ cat trace > /dev/null &
$ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point
$ echo timerlat > current_tracer
The root cause lies in the two calls to print_graph_function_flags
within print_trace_line during each s_show():
* One through 'iter->trace->print_line()';
* Another through 'event->funcs->trace()', which is hidden in
print_trace_fmt() before print_trace_line returns.
Tracer switching only updates the former, while the latter continues
to use the print_line function of the old tracer, which in the script
above is print_graph_function_flags.
Moreover, when switching from the 'function_graph' tracer to the
'timerlat' tracer, s_start only calls graph_trace_close of the
'function_graph' tracer to free 'iter->private', but does not set
it to NULL. This provides an opportunity for 'event->funcs->trace()'
to use an invalid 'iter->private'.
To fix this issue, set 'iter->private' to NULL immediately after
freeing it in graph_trace_close(), ensuring that an invalid pointer
is not passed to other tracers. Additionally, clean up the unnecessary
'iter->private = NULL' during each 'cat trace' when using wakeup and
irqsoff tracers.
[1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Link: https://lore.kernel.org/20250320122137.23635-1-wutengda@huaweicloud.com
Fixes: eecb91b9f98d ("tracing: Fix memleak due to race between current_tracer and trace")
Closes: https://lore.kernel.org/all/CAMgjq7BW79KDSCyp+tZHjShSzHsScSiJxn5ffskp-QzVM06fxw@mail.gmail.com/
Reported-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Cameron Williams <cang1@live.co.uk>
Date: Sun Feb 23 22:07:38 2025 +0000
tty: serial: 8250: Add some more device IDs
commit be6a23650908e2f827f2e7839a3fbae41ccb5b63 upstream.
These card IDs got missed the first time around.
Cc: stable <stable@kernel.org>
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DB7PR02MB380295BCC879CCF91315AC38C4C12@DB7PR02MB3802.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sherry Sun <sherry.sun@nxp.com>
Date: Wed Mar 12 10:25:03 2025 +0800
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
[ Upstream commit f5cb528d6441eb860250a2f085773aac4f44085e ]
According to the LPUART reference manual, TXRTSE and TXRTSPOL of MODIR
register only can be changed when the transmitter is disabled.
So disable the transmitter before changing RS485 related registers and
re-enable it after the change is done.
Fixes: 67b01837861c ("tty: serial: lpuart: Add RS485 support for 32-bit uart flavour")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250312022503.1342990-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sherry Sun <sherry.sun@nxp.com>
Date: Fri Apr 14 10:21:11 2023 +0800
tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform
[ Upstream commit d57d56e4dddfb5c92cd81abf8922055bf0fb85a4 ]
For lpuart32 platforms, UARTMODIR register is used instead of UARTMODEM.
So here should configure the corresponding UARTMODIR register bits to
avoid confusion.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230414022111.20896-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f5cb528d6441 ("tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guillaume Nault <gnault@redhat.com>
Date: Sat Mar 29 01:33:44 2025 +0100
tunnels: Accept PACKET_HOST in skb_tunnel_check_pmtu().
[ Upstream commit 8930424777e43257f5bf6f0f0f53defd0d30415c ]
Because skb_tunnel_check_pmtu() doesn't handle PACKET_HOST packets,
commit 30a92c9e3d6b ("openvswitch: Set the skbuff pkt_type for proper
pmtud support.") forced skb->pkt_type to PACKET_OUTGOING for
openvswitch packets that are sent using the OVS_ACTION_ATTR_OUTPUT
action. This allowed such packets to invoke the
iptunnel_pmtud_check_icmp() or iptunnel_pmtud_check_icmpv6() helpers
and thus trigger PMTU update on the input device.
However, this also broke other parts of PMTU discovery. Since these
packets don't have the PACKET_HOST type anymore, they won't trigger the
sending of ICMP Fragmentation Needed or Packet Too Big messages to
remote hosts when oversized (see the skb_in->pkt_type condition in
__icmp_send() for example).
These two skb->pkt_type checks are therefore incompatible as one
requires skb->pkt_type to be PACKET_HOST, while the other requires it
to be anything but PACKET_HOST.
It makes sense to not trigger ICMP messages for non-PACKET_HOST packets
as these messages should be generated only for incoming l2-unicast
packets. However there doesn't seem to be any reason for
skb_tunnel_check_pmtu() to ignore PACKET_HOST packets.
Allow both cases to work by allowing skb_tunnel_check_pmtu() to work on
PACKET_HOST packets and not overriding skb->pkt_type in openvswitch
anymore.
Fixes: 30a92c9e3d6b ("openvswitch: Set the skbuff pkt_type for proper pmtud support.")
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Tested-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/eac941652b86fddf8909df9b3bf0d97bc9444793.1743208264.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Boon Khai Ng <boon.khai.ng@intel.com>
Date: Wed Mar 12 11:05:44 2025 +0800
USB: serial: ftdi_sio: add support for Altera USB Blaster 3
commit 18e0885bd2ca738407036434418a26a58394a60e upstream.
The Altera USB Blaster 3, available as both a cable and an on-board
solution, is primarily used for programming and debugging FPGAs.
It interfaces with host software such as Quartus Programmer,
System Console, SignalTap, and Nios Debugger. The device utilizes
either an FT2232 or FT4232 chip.
Enabling the support for various configurations of the on-board
USB Blaster 3 by including the appropriate VID/PID pairs,
allowing it to function as a serial device via ftdi_sio.
Note that this check-in does not include support for the
cable solution, as it does not support UART functionality.
The supported configurations are determined by the
hardware design and include:
1) PID 0x6022, FT2232, 1 JTAG port (Port A) + Port B as UART
2) PID 0x6025, FT4232, 1 JTAG port (Port A) + Port C as UART
3) PID 0x6026, FT4232, 1 JTAG port (Port A) + Port C, D as UART
4) PID 0x6029, FT4232, 1 JTAG port (Port B) + Port C as UART
5) PID 0x602a, FT4232, 1 JTAG port (Port B) + Port C, D as UART
6) PID 0x602c, FT4232, 1 JTAG port (Port A) + Port B as UART
7) PID 0x602d, FT4232, 1 JTAG port (Port A) + Port B, C as UART
8) PID 0x602e, FT4232, 1 JTAG port (Port A) + Port B, C, D as UART
These configurations allow for flexibility in how the USB Blaster 3 is
used, depending on the specific needs of the hardware design.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fabio Porcedda <fabio.porcedda@gmail.com>
Date: Tue Mar 4 10:19:38 2025 +0100
USB: serial: option: add Telit Cinterion FE990B compositions
commit 4981bb50392b7515b765da28cf8768ce624c2670 upstream.
Add the following Telit Cinterion FE990B40 compositions:
0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b0 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10b1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b1 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10b2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b2 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10b3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10b3 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=28c2595e
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
[ johan: use USB_DEVICE_AND_INTERFACE_INFO() and sort by protocol ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fabio Porcedda <fabio.porcedda@gmail.com>
Date: Tue Mar 4 10:19:39 2025 +0100
USB: serial: option: fix Telit Cinterion FE990A name
commit 6232f0d8e100a26275bbd773fc56a60af2c95322 upstream.
The correct name for FE990 is FE990A so use it in order to avoid
confusion with FE990B.
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Johan Hovold <johan@kernel.org>
Date: Thu Mar 6 11:44:41 2025 +0100
USB: serial: option: match on interface class for Telit FN990B
commit 9a665fe3d967fe46edb4fd2497c7a5cc2dac2f55 upstream.
The device id entries for Telit FN990B ended up matching only on the
interface protocol. While this works, the protocol is qualified by the
interface class (and subclass) which should have been included.
Switch to matching using USB_DEVICE_AND_INTERFACE_INFO() while keeping
the entries sorted also by protocol for consistency.
Link: https://lore.kernel.org/20250227110655.3647028-2-fabio.porcedda@gmail.com/
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Brahmajit Das <brahmajit.xyz@gmail.com>
Date: Tue Jan 21 21:56:48 2025 +0530
vboxsf: fix building with GCC 15
[ Upstream commit 4e7487245abcbc5a1a1aea54e4d3b33c53804bda ]
Building with GCC 15 results in build error
fs/vboxsf/super.c:24:54: error: initializer-string for array of ‘unsigned char’ is too long [-Werror=unterminated-string-initialization]
24 | static const unsigned char VBSF_MOUNT_SIGNATURE[4] = "\000\377\376\375";
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Due to GCC having enabled -Werror=unterminated-string-initialization[0]
by default. Separately initializing each array element of
VBSF_MOUNT_SIGNATURE to ensure NUL termination, thus satisfying GCC 15
and fixing the build error.
[0]: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wno-unterminated-string-initialization
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Link: https://lore.kernel.org/r/20250121162648.1408743-1-brahmajit.xyz@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Jul 8 15:11:53 2022 +0000
vlan: fix memory leak in vlan_newlink()
commit 72a0b329114b1caa8e69dfa7cdad1dd3c69b8602 upstream.
Blamed commit added back a bug I fixed in commit 9bbd917e0bec
("vlan: fix memory leak in vlan_dev_set_egress_priority")
If a memory allocation fails in vlan_changelink() after other allocations
succeeded, we need to call vlan_dev_free_egress_priority()
to free all allocated memory because after a failed ->newlink()
we do not call any methods like ndo_uninit() or dev->priv_destructor().
In following example, if the allocation for last element 2000:2001 fails,
we need to free eight prior allocations:
ip link add link dummy0 dummy0.100 type vlan id 100 \
egress-qos-map 1:2 2:3 3:4 4:5 5:6 6:7 7:8 8:9 2000:2001
syzbot report was:
BUG: memory leak
unreferenced object 0xffff888117bd1060 (size 32):
comm "syz-executor408", pid 3759, jiffies 4294956555 (age 34.090s)
hex dump (first 32 bytes):
09 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff83fc60ad>] kmalloc include/linux/slab.h:600 [inline]
[<ffffffff83fc60ad>] vlan_dev_set_egress_priority+0xed/0x170 net/8021q/vlan_dev.c:193
[<ffffffff83fc6628>] vlan_changelink+0x178/0x1d0 net/8021q/vlan_netlink.c:128
[<ffffffff83fc67c8>] vlan_newlink+0x148/0x260 net/8021q/vlan_netlink.c:185
[<ffffffff838b1278>] rtnl_newlink_create net/core/rtnetlink.c:3363 [inline]
[<ffffffff838b1278>] __rtnl_newlink+0xa58/0xdc0 net/core/rtnetlink.c:3580
[<ffffffff838b1629>] rtnl_newlink+0x49/0x70 net/core/rtnetlink.c:3593
[<ffffffff838ac66c>] rtnetlink_rcv_msg+0x21c/0x5c0 net/core/rtnetlink.c:6089
[<ffffffff839f9c37>] netlink_rcv_skb+0x87/0x1d0 net/netlink/af_netlink.c:2501
[<ffffffff839f8da7>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
[<ffffffff839f8da7>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345
[<ffffffff839f9266>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921
[<ffffffff8384dbf6>] sock_sendmsg_nosec net/socket.c:714 [inline]
[<ffffffff8384dbf6>] sock_sendmsg+0x56/0x80 net/socket.c:734
[<ffffffff8384e15c>] ____sys_sendmsg+0x36c/0x390 net/socket.c:2488
[<ffffffff838523cb>] ___sys_sendmsg+0x8b/0xd0 net/socket.c:2542
[<ffffffff838525b8>] __sys_sendmsg net/socket.c:2571 [inline]
[<ffffffff838525b8>] __do_sys_sendmsg net/socket.c:2580 [inline]
[<ffffffff838525b8>] __se_sys_sendmsg net/socket.c:2578 [inline]
[<ffffffff838525b8>] __x64_sys_sendmsg+0x78/0xf0 net/socket.c:2578
[<ffffffff845ad8d5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff845ad8d5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff8460006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: 37aa50c539bc ("vlan: introduce vlan_dev_free_egress_priority")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Stefano Garzarella <sgarzare@redhat.com>
Date: Fri Mar 28 15:15:28 2025 +0100
vsock: avoid timeout during connect() if the socket is closing
[ Upstream commit fccd2b711d9628c7ce0111d5e4938652101ee30a ]
When a peer attempts to establish a connection, vsock_connect() contains
a loop that waits for the state to be TCP_ESTABLISHED. However, the
other peer can be fast enough to accept the connection and close it
immediately, thus moving the state to TCP_CLOSING.
When this happens, the peer in the vsock_connect() is properly woken up,
but since the state is not TCP_ESTABLISHED, it goes back to sleep
until the timeout expires, returning -ETIMEDOUT.
If the socket state is TCP_CLOSING, waiting for the timeout is pointless.
vsock_connect() can return immediately without errors or delay since the
connection actually happened. The socket will be in a closing state,
but this is not an issue, and subsequent calls will fail as expected.
We discovered this issue while developing a test that accepts and
immediately closes connections to stress the transport switch between
two connect() calls, where the first one was interrupted by a signal
(see Closes link).
Reported-by: Luigi Leonardi <leonardi@redhat.com>
Closes: https://lore.kernel.org/virtualization/bq6hxrolno2vmtqwcvb5bljfpb7mvwb3kohrvaed6auz5vxrfv@ijmd2f3grobn/
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20250328141528.420719-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Sandeen <sandeen@redhat.com>
Date: Thu Feb 27 11:41:08 2025 -0600
watch_queue: fix pipe accounting mismatch
[ Upstream commit f13abc1e8e1a3b7455511c4e122750127f6bc9b0 ]
Currently, watch_queue_set_size() modifies the pipe buffers charged to
user->pipe_bufs without updating the pipe->nr_accounted on the pipe
itself, due to the if (!pipe_has_watch_queue()) test in
pipe_resize_ring(). This means that when the pipe is ultimately freed,
we decrement user->pipe_bufs by something other than what than we had
charged to it, potentially leading to an underflow. This in turn can
cause subsequent too_many_pipe_buffers_soft() tests to fail with -EPERM.
To remedy this, explicitly account for the pipe usage in
watch_queue_set_size() to match the number set via account_pipe_buffers()
(It's unclear why watch_queue_set_size() does not update nr_accounted;
it may be due to intentional overprovisioning in watch_queue_set_size()?)
Fixes: e95aada4cb93d ("pipe: wakeup wr_wait after setting max_usage")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/206682a8-0604-49e5-8224-fdbe0c12b460@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Sun Feb 9 14:34:45 2025 +0200
wifi: iwlwifi: fw: allocate chained SG tables for dump
[ Upstream commit 7774e3920029398ad49dc848b23840593f14d515 ]
The firmware dumps can be pretty big, and since we use single
pages for each SG table entry, even the table itself may end
up being an order-5 allocation. Build chained tables so that
we need not allocate a higher-order table here.
This could be improved and cleaned up, e.g. by using the SG
pool code or simply kvmalloc(), but all of that would require
also updating the devcoredump first since that frees it all,
so we need to be more careful. SG pool might also run against
the CONFIG_ARCH_NO_SG_CHAIN limitation, which is irrelevant
here.
Also use _devcd_free_sgtable() for the error paths now, much
simpler especially since it's in two places now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.697c7a465ac9.Iea982df46b5c075bfb77ade36f187d99a70c63db@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jann Horn <jannh@google.com>
Date: Tue Mar 25 03:01:23 2025 +0100
x86/dumpstack: Fix inaccurate unwinding from exception stacks due to misplaced assignment
[ Upstream commit 2c118f50d7fd4d9aefc4533a26f83338b2906b7a ]
Commit:
2e4be0d011f2 ("x86/show_trace_log_lvl: Ensure stack pointer is aligned, again")
was intended to ensure alignment of the stack pointer; but it also moved
the initialization of the "stack" variable down into the loop header.
This was likely intended as a no-op cleanup, since the commit
message does not mention it; however, this caused a behavioral change
because the value of "regs" is different between the two places.
Originally, get_stack_pointer() used the regs provided by the caller; after
that commit, get_stack_pointer() instead uses the regs at the top of the
stack frame the unwinder is looking at. Often, there are no such regs at
all, and "regs" is NULL, causing get_stack_pointer() to fall back to the
task's current stack pointer, which is not what we want here, but probably
happens to mostly work. Other times, the original regs will point to
another regs frame - in that case, the linear guess unwind logic in
show_trace_log_lvl() will start unwinding too far up the stack, causing the
first frame found by the proper unwinder to never be visited, resulting in
a stack trace consisting purely of guess lines.
Fix it by moving the "stack = " assignment back where it belongs.
Fixes: 2e4be0d011f2 ("x86/show_trace_log_lvl: Ensure stack pointer is aligned, again")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-2-acd774364768@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jann Horn <jannh@google.com>
Date: Tue Mar 25 03:01:22 2025 +0100
x86/entry: Fix ORC unwinder for PUSH_REGS with save_ret=1
[ Upstream commit 57e2428f8df8263275344566e02c277648a4b7f1 ]
PUSH_REGS with save_ret=1 is used by interrupt entry helper functions that
initially start with a UNWIND_HINT_FUNC ORC state.
However, save_ret=1 means that we clobber the helper function's return
address (and then later restore the return address further down on the
stack); after that point, the only thing on the stack we can unwind through
is the IRET frame, so use UNWIND_HINT_IRET_REGS until we have a full
pt_regs frame.
( An alternate approach would be to move the pt_regs->di overwrite down
such that it is the final step of pt_regs setup; but I don't want to
rearrange entry code just to make unwinding a tiny bit more elegant. )
Fixes: 9e809d15d6b6 ("x86/entry: Reduce the code footprint of the 'idtentry' macro")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-1-acd774364768@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Benjamin Berg <benjamin.berg@intel.com>
Date: Wed Feb 26 14:31:36 2025 +0100
x86/fpu: Avoid copying dynamic FP state from init_task in arch_dup_task_struct()
[ Upstream commit 5d3b81d4d8520efe888536b6906dc10fd1a228a8 ]
The init_task instance of struct task_struct is statically allocated and
may not contain the full FP state for userspace. As such, limit the copy
to the valid area of both init_task and 'dst' and ensure all memory is
initialized.
Note that the FP state is only needed for userspace, and as such it is
entirely reasonable for init_task to not contain parts of it.
Fixes: 5aaeb5c01c5b ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250226133136.816901-1-benjamin@sipsolutions.net
----
v2:
- Fix code if arch_task_struct_size < sizeof(init_task) by using
memcpy_and_pad.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnd Bergmann <arnd@arndb.de>
Date: Tue Feb 25 22:32:33 2025 +0100
x86/irq: Define trace events conditionally
[ Upstream commit 9de7695925d5d2d2085681ba935857246eb2817d ]
When both of X86_LOCAL_APIC and X86_THERMAL_VECTOR are disabled,
the irq tracing produces a W=1 build warning for the tracing
definitions:
In file included from include/trace/trace_events.h:27,
from include/trace/define_trace.h:113,
from arch/x86/include/asm/trace/irq_vectors.h:383,
from arch/x86/kernel/irq.c:29:
include/trace/stages/init.h:2:23: error: 'str__irq_vectors__trace_system_name' defined but not used [-Werror=unused-const-variable=]
Make the tracepoints conditional on the same symbosl that guard
their usage.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250225213236.3141752-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Tue Nov 22 12:51:22 2022 +0100
x86/kexec: Fix double-free of elf header buffer
commit d00dd2f2645dca04cf399d8fc692f3f69b6dd996 upstream.
After
b3e34a47f989 ("x86/kexec: fix memory leak of elf header buffer"),
freeing image->elf_headers in the error path of crash_load_segments()
is not needed because kimage_file_post_load_cleanup() will take
care of that later. And not clearing it could result in a double-free.
Drop the superfluous vfree() call at the error path of
crash_load_segments().
Fixes: b3e34a47f989 ("x86/kexec: fix memory leak of elf header buffer")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221122115122.13937-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Baoquan He <bhe@redhat.com>
Date: Wed Feb 23 19:32:24 2022 +0800
x86/kexec: fix memory leak of elf header buffer
commit b3e34a47f98974d0844444c5121aaff123004e57 upstream.
This is reported by kmemleak detector:
unreferenced object 0xffffc900002a9000 (size 4096):
comm "kexec", pid 14950, jiffies 4295110793 (age 373.951s)
hex dump (first 32 bytes):
7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 .ELF............
04 00 3e 00 01 00 00 00 00 00 00 00 00 00 00 00 ..>.............
backtrace:
[<0000000016a8ef9f>] __vmalloc_node_range+0x101/0x170
[<000000002b66b6c0>] __vmalloc_node+0xb4/0x160
[<00000000ad40107d>] crash_prepare_elf64_headers+0x8e/0xcd0
[<0000000019afff23>] crash_load_segments+0x260/0x470
[<0000000019ebe95c>] bzImage64_load+0x814/0xad0
[<0000000093e16b05>] arch_kexec_kernel_image_load+0x1be/0x2a0
[<000000009ef2fc88>] kimage_file_alloc_init+0x2ec/0x5a0
[<0000000038f5a97a>] __do_sys_kexec_file_load+0x28d/0x530
[<0000000087c19992>] do_syscall_64+0x3b/0x90
[<0000000066e063a4>] entry_SYSCALL_64_after_hwframe+0x44/0xae
In crash_prepare_elf64_headers(), a buffer is allocated via vmalloc() to
store elf headers. While it's not freed back to system correctly when
kdump kernel is reloaded or unloaded. Then memory leak is caused. Fix it
by introducing x86 specific function arch_kimage_file_post_load_cleanup(),
and freeing the buffer there.
And also remove the incorrect elf header buffer freeing code. Before
calling arch specific kexec_file loading function, the image instance has
been initialized. So 'image->elf_headers' must be NULL. It doesn't make
sense to free the elf header buffer in the place.
Three different people have reported three bugs about the memory leak on
x86_64 inside Redhat.
Link: https://lkml.kernel.org/r/20220223113225.63106-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Conflict due to 179350f00e06 ("x86: Use ELF fields defined in 'struct
kimage'") not in the tree ]
Signed-off-by: Abdelkareem Abdelsaamad <kareemem@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Florent Revest <revest@chromium.org>
Date: Mon Mar 10 15:42:43 2025 +0100
x86/microcode/AMD: Fix out-of-bounds on systems with CPU-less NUMA nodes
commit e3e89178a9f4a80092578af3ff3c8478f9187d59 upstream.
Currently, load_microcode_amd() iterates over all NUMA nodes, retrieves their
CPU masks and unconditionally accesses per-CPU data for the first CPU of each
mask.
According to Documentation/admin-guide/mm/numaperf.rst:
"Some memory may share the same node as a CPU, and others are provided as
memory only nodes."
Therefore, some node CPU masks may be empty and wouldn't have a "first CPU".
On a machine with far memory (and therefore CPU-less NUMA nodes):
- cpumask_of_node(nid) is 0
- cpumask_first(0) is CONFIG_NR_CPUS
- cpu_data(CONFIG_NR_CPUS) accesses the cpu_info per-CPU array at an
index that is 1 out of bounds
This does not have any security implications since flashing microcode is
a privileged operation but I believe this has reliability implications by
potentially corrupting memory while flashing a microcode update.
When booting with CONFIG_UBSAN_BOUNDS=y on an AMD machine that flashes
a microcode update. I get the following splat:
UBSAN: array-index-out-of-bounds in arch/x86/kernel/cpu/microcode/amd.c:X:Y
index 512 is out of range for type 'unsigned long[512]'
[...]
Call Trace:
dump_stack
__ubsan_handle_out_of_bounds
load_microcode_amd
request_microcode_amd
reload_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Change the loop to go over only NUMA nodes which have CPUs before determining
whether the first CPU on the respective node needs microcode update.
[ bp: Massage commit message, fix typo. ]
Fixes: 7ff6edf4fef3 ("x86/microcode/AMD: Fix mixed steppings support")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250310144243.861978-1-revest@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mike Rapoport (Microsoft) <rppt@kernel.org>
Date: Sun Jan 26 09:47:25 2025 +0200
x86/mm/pat: cpa-test: fix length for CPA_ARRAY test
[ Upstream commit 33ea120582a638b2f2e380a50686c2b1d7cce795 ]
The CPA_ARRAY test always uses len[1] as numpages argument to
change_page_attr_set() although the addresses array is different each
iteration of the test loop.
Replace len[1] with len[i] to have numpages matching the addresses array.
Fixes: ecc729f1f471 ("x86/mm/cpa: Add ARRAY and PAGES_ARRAY selftests")
Signed-off-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250126074733.1384926-2-rppt@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jann Horn <jannh@google.com>
Date: Fri Jan 3 19:39:38 2025 +0100
x86/mm: Fix flush_tlb_range() when used for zapping normal PMDs
commit 3ef938c3503563bfc2ac15083557f880d29c2e64 upstream.
On the following path, flush_tlb_range() can be used for zapping normal
PMD entries (PMD entries that point to page tables) together with the PTE
entries in the pointed-to page table:
collapse_pte_mapped_thp
pmdp_collapse_flush
flush_tlb_range
The arm64 version of flush_tlb_range() has a comment describing that it can
be used for page table removal, and does not use any last-level
invalidation optimizations. Fix the X86 version by making it behave the
same way.
Currently, X86 only uses this information for the following two purposes,
which I think means the issue doesn't have much impact:
- In native_flush_tlb_multi() for checking if lazy TLB CPUs need to be
IPI'd to avoid issues with speculative page table walks.
- In Hyper-V TLB paravirtualization, again for lazy TLB stuff.
The patch "x86/mm: only invalidate final translations with INVLPGB" which
is currently under review (see
<https://lore.kernel.org/all/20241230175550.4046587-13-riel@surriel.com/>)
would probably be making the impact of this a lot worse.
Fixes: 016c4d92cd16 ("x86/mm/tlb: Add freed_tables argument to flush_tlb_mm_range")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250103-x86-collapse-flush-fix-v1-1-3c521856cfa6@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Arnd Bergmann <arnd@arndb.de>
Date: Wed Feb 26 22:37:14 2025 +0100
x86/platform: Only allow CONFIG_EISA for 32-bit
[ Upstream commit 976ba8da2f3c2f1e997f4f620da83ae65c0e3728 ]
The CONFIG_EISA menu was cleaned up in 2018, but this inadvertently
brought the option back on 64-bit machines: ISA remains guarded by
a CONFIG_X86_32 check, but EISA no longer depends on ISA.
The last Intel machines ith EISA support used a 82375EB PCI/EISA bridge
from 1993 that could be paired with the 440FX chipset on early Pentium-II
CPUs, long before the first x86-64 products.
Fixes: 6630a8e50105 ("eisa: consolidate EISA Kconfig entry in drivers/eisa")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-11-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guilherme G. Piccoli <gpiccoli@igalia.com>
Date: Sat Feb 15 17:58:16 2025 -0300
x86/tsc: Always save/restore TSC sched_clock() on suspend/resume
commit d90c9de9de2f1712df56de6e4f7d6982d358cabe upstream.
TSC could be reset in deep ACPI sleep states, even with invariant TSC.
That's the reason we have sched_clock() save/restore functions, to deal
with this situation. But what happens is that such functions are guarded
with a check for the stability of sched_clock - if not considered stable,
the save/restore routines aren't executed.
On top of that, we have a clear comment in native_sched_clock() saying
that *even* with TSC unstable, we continue using TSC for sched_clock due
to its speed.
In other words, if we have a situation of TSC getting detected as unstable,
it marks the sched_clock as unstable as well, so subsequent S3 sleep cycles
could bring bogus sched_clock values due to the lack of the save/restore
mechanism, causing warnings like this:
[22.954918] ------------[ cut here ]------------
[22.954923] Delta way too big! 18446743750843854390 ts=18446744072977390405 before=322133536015 after=322133536015 write stamp=18446744072977390405
[22.954923] If you just came from a suspend/resume,
[22.954923] please switch to the trace global clock:
[22.954923] echo global > /sys/kernel/tracing/trace_clock
[22.954923] or add trace_clock=global to the kernel command line
[22.954937] WARNING: CPU: 2 PID: 5728 at kernel/trace/ring_buffer.c:2890 rb_add_timestamp+0x193/0x1c0
Notice that the above was reproduced even with "trace_clock=global".
The fix for that is to _always_ save/restore the sched_clock on suspend
cycle _if TSC is used_ as sched_clock - only if we fallback to jiffies
the sched_clock_stable() check becomes relevant to save/restore the
sched_clock.
Debugged-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250215210314.351480-1-gpiccoli@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Cosmin Ratiu <cratiu@nvidia.com>
Date: Wed Feb 19 12:52:48 2025 +0200
xfrm_output: Force software GSO only in tunnel mode
[ Upstream commit 0aae2867aa6067f73d066bc98385e23c8454a1d7 ]
The cited commit fixed a software GSO bug with VXLAN + IPSec in tunnel
mode. Unfortunately, it is slightly broader than necessary, as it also
severely affects performance for Geneve + IPSec transport mode over a
device capable of both HW GSO and IPSec crypto offload. In this case,
xfrm_output unnecessarily triggers software GSO instead of letting the
HW do it. In simple iperf3 tests over Geneve + IPSec transport mode over
a back-2-back pair of NICs with MTU 1500, the performance was observed
to be up to 6x worse when doing software GSO compared to leaving it to
the hardware.
This commit makes xfrm_output only trigger software GSO in crypto
offload cases for already encapsulated packets in tunnel mode, as not
doing so would then cause the inner tunnel skb->inner_networking_header
to be overwritten and break software GSO for that packet later if the
device turns out to not be capable of HW GSO.
Taking a closer look at the conditions for the original bug, to better
understand the reasons for this change:
- vxlan_build_skb -> iptunnel_handle_offloads sets inner_protocol and
inner network header.
- then, udp_tunnel_xmit_skb -> ip_tunnel_xmit adds outer transport and
network headers.
- later in the xmit path, xfrm_output -> xfrm_outer_mode_output ->
xfrm4_prepare_output -> xfrm4_tunnel_encap_add overwrites the inner
network header with the one set in ip_tunnel_xmit before adding the
second outer header.
- __dev_queue_xmit -> validate_xmit_skb checks whether GSO segmentation
needs to happen based on dev features. In the original bug, the hw
couldn't segment the packets, so skb_gso_segment was invoked.
- deep in the .gso_segment callback machinery, __skb_udp_tunnel_segment
tries to use the wrong inner network header, expecting the one set in
iptunnel_handle_offloads but getting the one set by xfrm instead.
- a bit later, ipv6_gso_segment accesses the wrong memory based on that
wrong inner network header.
With the new change, the original bug (or similar ones) cannot happen
again, as xfrm will now trigger software GSO before applying a tunnel.
This concern doesn't exist in packet offload mode, when the HW adds
encapsulation headers. For the non-offloaded packets (crypto in SW),
software GSO is still done unconditionally in the else branch.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Fixes: a204aef9fd77 ("xfrm: call xfrm_output_gso when inner_protocol is set in xfrm_output")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>