3. Getting and installing the software

3.1.1. Download

Origin-Site: http://www.mysql.com/downloads/

3.1.2. Building and installing

cd /usr/local
tar -xvzf mysql-3.23.56.tar.gz
cd mysql-3.23.56

./configure \
--prefix=/usr/local/mysql \
--enable-assembler \
--with-innodb

make
make install

/usr/local/mysql/bin/mysql_install_db
echo /usr/local/mysql/lib/mysql >> /etc/ld.so.conf
ldconfig

ln -s /usr/local/mysql/include/mysql /usr/include/mysql
ln -s /usr/local/mysql/lib/mysql /usr/lib/mysql

For security-improvement add a mysql-user on your system i.e. ╩mysql╚, then

chown -R mysql /usr/local/mysql/var

You may wish to start MySQL automatically at boottime, copy /usr/local/mysql/share/mysql/mysql.server to /etc/init.d/ for SuSE, for Redhat it is /etc/rc.d/init.d instead of /etc/init.d/. Further you need to add symbolic links to /etc/init.d/rc3.d for SuSE and /etc/rc.d/rc3.d for Redhat.

The following example is for SuSE Linux and should be easily changed for Redhat and other Linux distributions and commercial Unixes.

cp /usr/local/mysql/share/mysql/mysql.server /etc/init.d/
ln -s /etc/init.d/mysql.server /etc/init.d/rc3.d/S20mysql
ln -s /etc/init.d/mysql.server /etc/init.d/rc3.d/k08mysql

3.2.1. Download Berkely DB

Origin-Site: http://www.sleepycat.com/update/snapshot/db-4.0.14.tar.gz

3.2.2. Building and installing Berkeley DB

cd dist ./configure --prefix=/usr/local/bdb make make install echo /usr/local/bdb/lib >> /etc/ld.so.conf ldconfig

3.3.1. Download OpenSSL

Origin-Site http://www.openssl.org

3.3.2. Building and installing

cd /usr/local
tar -xvzf openssl-0.9.7a.tar.gz

cd openssl-0.9.7a

./config shared

make
make test
make install

echo "/usr/local/ssl/lib" >> /etc/ld.so.conf
ldconfig

	Select your CPU to improve speed
	By default the Makefile generates code for the i486 CPU. You can change this by editing the Makefile after running config shared. Search for -m486 and replace it i.e with -march=athlon

3.4.1. Download Cyrus SASL and Cyrus IMAP

Origin-Site: ftp://ftp.andrew.cmu.edu/pub/cyrus-mail/cyrus-sasl-2.1.12.tar.gz

Origin-Site: ftp://ftp.andrew.cmu.edu/pub/cyrus-mail/cyrus-imapd-2.1.12.tar.gz

3.4.2. Create the cyrus user

On most systems there is no cyrus user and mailgroup per default. Check for a free UID, usually daemons are running with UID less that 100. As example I'm using UID 96 like SuSE has in the default /etc/passwd.

groupadd mail
useradd -u 96 -d /usr/cyrus -g mail cyrus
passwd cyrus

3.4.3. Building and installing Cyrus SASL

tar -xvzf cyrus-sasl-2.1.12.tar.gz
cd cyrus-sasl-2.1.12

./configure \
--enable-anon \
--enable-plain \
--enable-login \
--disable-krb4 \
--with-saslauthd=/var/run/saslauthd \
--with-pam \
--with-dblib=berkeley \
--with-bdb-libdir=/usr/local/bdb/lib \
--with-bdb-incdir=/usr/local/bdb/include \
--with-openssl=/usr/local/ssl \
--with-plugindir=/usr/local/lib/sasl2


make
make install

mkdir -p /var/run/saslauthd

cd saslauthd
make testsaslauthd
cp testsaslauthd /usr/local/bin

echo /usr/local/lib/sasl2 >> /etc/ld.so.conf
ldconfig

The SASL library is installed in /usr/local/lib/sasl2 but some programs are expecting SASL in /usr/lib/sasl2. So it is a good idea to create a symbolic link: ln -s /usr/local/lib/sasl2 /usr/lib/sasl2.

3.4.4. Building Cyrus-IMAP

tar -xvzf cyrus-imapd-2.1.12.tar.gz
cd cyrus-imapd-2.1.12

export CPPFLAGS="-I/usr/include/et" 

./configure \
--with-sasl=/usr/local/lib \
--with-perl \
--with-auth=unix \
--with-dbdir=/usr/local/bdb \
--with-bdb-libdir=/usr/local/bdb/lib \
--with-bdb-incdir=/usr/local/bdb/include \
--with-openssl=/usr/local/ssl \
--without-ucdsnmp \

make depend
make
make install

3.4.5. Automatic startup script

If you wish to start the Cyrus IMAP daemon automatically after booting, you need a startupscript. Place the following script in /etc/init.d/ for Redhat it is /etc/rc.d/init.d instead of /etc/init.d/.

#!/bin/bash
#
# Cyrus startup script

case "$1" in
    start)
        # Starting SASL saslauthdaemon
        /usr/local/sbin/saslauthd -a pam&

        # Starting Cyrus IMAP Server
        /usr/cyrus/bin/master &
        ;;

    stop)

        # Stopping SASL saslauthdaemon
        killall saslauthd

        # Stopping Cyrus IMAP Server
        killall /usr/cyrus/bin/master

        ;;

    *)
        echo "Usage: $0 {start|stop}"
        exit 1
        ;;

esac

If I get the time, I'll provide a more sophisticated script, but this script works

Now create the Symlinks in the runlevel directory (SuSE):

ln -s /etc/init.d/cyrus /etc/init.d/rc3.d/S20
ln -s /etc/init.d/cyrus /etc/init.d/rc3.d/K10

For Redhat:

ln -s /etc/rc.d/init.d/cyrus /etc/rc.d/rc3.d/S20cyrus
ln -s /etc/rc.d/init.d/cyrus /etc/rc.d/rc3.d/K10cyrus

3.5.1. Download

Origin-Site: http://www.postfix.org/ftp-sites.html

3.5.2. Creating a User-ID (UID) and Group-ID (GID) for postfix

Before you can build and install postfix you have to be sure a ╩postfix╚ and a ╩postdrop╚ groups and users exists on the system. First check for the groups. You can check this by grep postfix /etc/group and grep maildrop /etc/group

If there are no such groups and users, you just create them. Search for a free nummeric UID and GID. In the following example I will use UID and GID 33333 for Postfix and 33335 for the maildrop UID and GID. This ID's are corresponding to other documents.

groupadd -g 33333 postfix
groupadd -g 33335 postdrop

useradd -u 33333 -g 33333 -d /dev/null -s /bin/false postfix

3.5.3. Building and installing

The following screen shows what you have to do, if you installed MySQL from source as described above. If you installed MySQL from a binary package such as rpm or deb, then you have to change the include and library-flags to -I/usr/include/mysql and -L/usr/lib/mysql.

	Old MTA needs to be uninstalled
	It is important, that you are uninstalling any sendmail version from RPM based Systems. I suggest to remove sendmail, and install Postfix instead. At least SuSE RPMs need a MTA. After installing the Postfix-RPM, just over-install Postfix by further following the HOWTO

tar -xvzf postfix-2.0.7.tar.gz

cd postfix-2.0.7

make makefiles 'CCARGS=-DHAS_MYSQL \
-I/usr/local/mysql/include/mysql -DUSE_SASL_AUTH \
-I/usr/local/include/sasl -I/usr/local/bdb/include' \
'AUXLIBS=-L/usr/local/mysql/lib/mysql \
-lmysqlclient -lz -lm -L/usr/local/lib -lsasl2 -L/usr/local/bdb/lib'
make
make install

During make install a few question are asked. Just pressing Enter should match your needs. For Redhat users it could be useful to enter /usr/local/share/man

Now you need to create some sybolic links to start Postfix automatically on system startup. The sample is for SuSE Linux, please consult your vendors manual for other distributions.

ln -s /usr/sbin/postfix /etc/init.d/rc3.d/S14postfix
ln -s /usr/sbin/postfix /etc/init.d/rc3.d/K07postfix

3.7.1. Download

Origin-Site: http://sourceforge.net/projects/pam-mysql/

3.7.2. Installing

tar -xvzf pam_mysql-0.5.tar.gz

cd pam_mysql

Depending if you compiled mysql by yourself or not, check the Makefile and enter the correct path to your mysql libs and add the compiler flag CFLAGS -I/path/to/mysql/include.

ifndef FULL_LINUX_PAM_SOURCE_TREE
export DYNAMIC=-DPAM_DYNAMIC
export CC=gcc
export CFLAGS=-O2 -Dlinux -DLINUX_PAM \
       -ansi -D_POSIX_SOURCE -Wall -Wwrite-strings \
       -Wpointer-arith -Wcast-qual -Wcast-align -Wtraditional \
       -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Winline \
       -Wshadow -pedantic -fPIC -I/usr/local/mysql/include
export MKDIR=mkdir -p
export LD_D=gcc -shared -Xlinker -x -L/usr/local/mysql/lib/mysql -lz
endif

After customizing that file go ahead with compiling pam_mysql

make

cp pam_mysql.so /lib/security

[[ ! -d /var/lib/mysql ]] && mkdir /var/lib/mysql
ln -s /tmp/mysql.sock /var/lib/mysql/mysql.sock

3.8.1. Download

Origin-Site: http://www.web-cyradm.org

3.8.2. Installing

cd /usr/local/apache/htdocs

tar -xvzf web-cyradm-0.5.3.tar.gz

touch /var/log/web-cyradm.log
chown nobody /var/log/web-cyradm.log

After unpacking web-cyradm, move it to a place in your webservers DocumentRoot

Thats all. Now you need to configure the whole bunch of software.

Web-cyradm 0.5.3 is considered stable, and was released on 2003-03-24

Since web-cyradm uses PEAR for its database abstraction layer, you also need a recent copy of PEAR. This is included in recent PHP Versions. I strongly suggest to update PHP to 4.3.1, because a lot of important bugs have been fixed.

An often mistake is to forget to touch the logfile and change the owner to the UID that Apache use. This is usually ╩nobody╚ or ╩wwwrun╚.

3.8.3. Create the databases and tables

Now we need to create the database and tables for Postfix and Web-cyradm and add a user to the database.

Web-cyradm comes with three MySQL scripts: insertuser_mysql.sql and create_mysql.sql. The first inserts the Database user to the database ╩mysql╚ and creates the database ╩mail╚. The second creates the needed tables and populates the database with an initial admin-user and the cyrus user.

The third script is used for upgrading from Web-cyradm 0.5.2 to 0.5.3.

The password for the database user ╩mail╚ in this example is ╩secret╚. Please insert whatever user and password you like.

The username for the initial superuser is ╩admin╚ with the password ╩test╚.

	Change the default password!
	If a malicious user wants to gain unauthorized access to a system, the first try is always the default username and password supplied by the vendor. It is IMPORTANT that you are changing them in the scripts before applying them.

After customizing the username and password, apply the scripts:

/usr/local/mysql/bin/mysql -u root -p < \
/usr/local/apache/htdocs/web-cyradm/scripts/insertuser_mysql.sql

/usr/local/mysql/bin/mysql mail -u mail -p < \
/usr/local/apache/htdocs/web-cyradm/scripts/create_mysql.sql

3.8.4. Upgrading from 0.5.2 to 0.5.3

In version 0.5.3 there us a small Database enhancement done. You can upgrade your Database by issuing the MySQL script that commes with the distribution.

mysql mail -u mail -p < \ 
scripts/upgrade-0.5.2-to-0.5.3_mysql.sql

Since Version 0.5.3 web-cyradm does have full support for DES crypted passwords. You can use the php-script migrate.php to convert the users passwords from plain to unix compatible crypt (DES).

	Migration from plain to crypt cannot be undone
	Be sure to have a recent backup of your database before doing anything with the migration script.