OpenForum RSS: vwic2-2mft-g703

vwic2-2mft-g703 (CrAzOiD)

Fri, 19 Sep 2008 10:22:47 GMT

>[�� ]
>> <0-3> WIC slot number (0:WIC, 1:Onboard for NM-HDV2)
>>
>>c3825(config)#card type e1 0 0 ?
>> <cr>
>>
>>c3825(config)#card type e1 0 0
>>Card in slot 0 was removed or does not support command.
>>c3825(config)#
>
>card type e1 2 0

card type e1 0 2
��
��!

vwic2-2mft-g703 (uone)

Fri, 19 Sep 2008 10:20:45 GMT

>[�� ]
>
>c3825(config)#card type e1 0 ?
> <0-3> WIC slot number (0:WIC, 1:Onboard for NM-HDV2)
>
>c3825(config)#card type e1 0 0 ?
> <cr>
>
>c3825(config)#card type e1 0 0
>Card in slot 0 was removed or does not support command.
>c3825(config)#

card type e1 2 0

vwic2-2mft-g703 (CrAzOiD)

Fri, 19 Sep 2008 10:09:52 GMT

>card type e1
>http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/voice/t1.e1_digital_voice_install_config/3592conf.html#wp1047140

c3825(config)#card type e1 ?
<0-2> Card slot number (always 0 for 1800 series & 2801 routers)

c3825(config)#card type e1 1 ?
<cr>

c3825(config)#card type e1 1
Card in slot 1 was removed or does not support command.
c3825(config)#card type e1 2
Card in slot 2 was removed or does not support command.
c3825(config)#card type e1 ?
<0-2> Card slot number (always 0 for 1800 series & 2801 routers)

c3825(config)#card type e1 0
% Incomplete command.

c3825(config)#card type e1 0 ?
<0-3> WIC slot number (0:WIC, 1:Onboard for NM-HDV2)

c3825(config)#card type e1 0 0 ?
<cr>

c3825(config)#card type e1 0 0
Card in slot 0 was removed or does not support command.
c3825(config)#

vwic2-2mft-g703 (All is not what it seems)

Fri, 19 Sep 2008 10:05:09 GMT

card type e1
http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/voice/t1.e1_digital_voice_install_config/3592conf.html#wp1047140

vwic2-2mft-g703 (CrAzOiD)

Fri, 19 Sep 2008 10:03:11 GMT

>[�� ]
>>
>> ^
>>% Invalid input detected at '^' marker.
>>
>>c3825(config)#network-clock-select 1 ?
>> Serial Serial
>>
>>c3825(config)#network-clock-select 1
>
>type card e1

c3825(config)#type
^
% Invalid input detected at '^' marker.

�� ?

vwic2-2mft-g703 (uone)

Fri, 19 Sep 2008 09:55:27 GMT

>[�� ]
>
>
>
> ^
>% Invalid input detected at '^' marker.
>
>c3825(config)#network-clock-select 1 ?
> Serial Serial
>
>c3825(config)#network-clock-select 1

type card e1

vwic2-2mft-g703 (CrAzOiD)

Fri, 19 Sep 2008 09:43:15 GMT

>�� :
>network-clock-participate wic 2
>network-clock-select 1 E1 0/2/0
>�� :
>isdn switch-type primary-net5
>�� :
>controller E1 0/2/0
> pri-group timeslots 1-31,16

c3825#conf t
Enter configuration commands, one per line. End with CNTL/Z.
c3825(config)#network-clock-participate wic 2
WIC slot is empty or does not support clock participate
c3825(config)#network-clock-select 1 E1 0/2/0
^
% Invalid input detected at '^' marker.

c3825(config)#network-clock-select 1 ?
Serial Serial

c3825(config)#network-clock-select 1

vwic2-2mft-g703 (All is not what it seems)

Fri, 19 Sep 2008 09:34:00 GMT

�� :
network-clock-participate wic 2
network-clock-select 1 E1 0/2/0
�� :
isdn switch-type primary-net5
�� :
controller E1 0/2/0
pri-group timeslots 1-31,16

vwic2-2mft-g703 (CrAzOiD)

Fri, 19 Sep 2008 09:26:49 GMT

�� PVDM ��
PVDM Slot 0:
64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
Hardware Revision : 4.0
Part Number : 73-8541-05
Board Revision : A0
Deviation Number : 0
Fab Version : 04
PCB Serial Number : FOC10172VBW
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : PVDM2-64
Version Identifier : V01
EEPROM format version 4